Evolution Series Edge Release R3A00 Bridging Societies.

Evolution Series Edge

Release R3A00

Bridging Societies

R3 highlights (April - 2010)

Provider VLAN: Ethernet QinQ (licensed feature)

Terminal location settings: Configuration of terminal location by coordinates

Added field for additional terminal info

New L2/L3 features: Ethernet port to port configuration

Ethernet ingress rate setting per port

Ethernet port mirroring

User selectable routing of management traffic

Priority setting of management traffic

Customer benefits Network provider can add his own (control & priority) tag on packets independent of customer traffic

(S-VLAN)

• Activated by license: EVLIC-EDGE-QinQ

• Allows network provider to add an S-tag to incoming traffic

• Access port will add/remove tags. Trunk ports will keep tags

Provider VLAN (QinQ):

Terminal Location Settings:

Customer benefits Easier to manage the network as info about each terminal can be retrieved through the

management system

New Ethernet features (unlicensed): Port to port configuration:

User traffic on one port will be directed to the same port on the remote terminal. This feature can be used to separate customers or separate traffic to different sites without using user configurable VLANs

Ingress rate setting per port: A feature to limit the capacity per port.

Port Mirroring: Ingress or Egress traffic from one port can be mirrored to another port without disturbing the

traffic. This feature is intended for fault finding purposes. User selectable routing of management traffic:

The user can configure which port management traffic is routed to. This feature can be used to block management traffic over WAN or to other network elements

Priority setting of management traffic: DSCP value for the management traffic can be set to prioritize this traffic during congestion

Customer benefits

Improved flexibility for various network configurations

Edge 4u?