> EVOLPACK SERIES 3KVA UPS True On-line Double Conversion UPS Naveed Ahmed 27-Feb-2012
>
EVOLPACK SERIES3KVA UPS
True On-line Double Conversion UPS
Naveed Ahmed
27-Feb-2012
Slide 2 of 23 11.04.23
EVOLPACK 3KVA UPS
True On-line Double Conversion UPS
3KVA3KVA
Slide 3 of 23 11.04.23
1. Introduction
2. System Block Diagram
3. Physical
4. Product Features
5. Technical Specifications
Contents:Contents:
Slide 4 of 23 11.04.23
> High End Power Protection:->1). Servers, Networking & VOIP (voice over internet protocol)>2). Telecom Equipment>3). Sensitive Equipment in Industrial Environment
Introduction
Slide 5 of 23 11.04.23
>Standards Compliance
230V versionEN62040-1-1
EN62040-2,
EN61000-4-2/-3/-4/-5
Introduction
Slide 6 of 23 11.04.23
Introduction
System Block Diagram
Extreme Protection:
Slide 7 of 23 11.04.23
Physical
H (mm) W (mm) D (mm) Weights
3KVA 176 (4U) 440 420 ~27kg
Width (W)
Depth (D)
Height (H)
Slide 8 of 23 11.04.23
>Real Panel Explanation(3KVA)1 USB Comm. Port2 RS-232 Comm. Port3 EPO4 External Battery Connector 5 Socket for connection to AC-power source 6 Input circuit breaker
7 Slot for Communications-card option8 Outlets 9 Two Programmable outlets10 Output Breaker for two Power Programmable
outlets
11 Output circuit breakers12 Fan
1
23
4
56
7
89
10 11
12
Physical
Slide 9 of 23 11.04.23
Product Features
Advanced Digital Control Technology High Overall Efficiency High Power Output High Availability Programmable outlets Personalization & Intelligent Self-diagnostic Multiple Optional Interfaces Hot-Swappable Battery Long Run Time Options
Slide 10 of 23 11.04.23
>Advanced Digital Technology
Less Components, then Higher Reliability
Less Surface, then Higher Immunity
TMS320LF2407A
TEXAS
INSTRUMENTS
Product Features
Slide 11 of 23 11.04.23
High Overall Efficiency (Normal Mode)
Product Features
Vin=230Vac/50Hz
Vo=230Vac/50Hz
Load=Linear Load
83%86% 88% 90%
0
20
40
60
80
100
1 2 3 4 5 Load(%)
Efficiency(%)
0 25 50 75 100
Slide 12 of 23 11.04.23
>High Power
Output Output Power Factor 0.8
3KVA = 2400W
Product Features
Slide 13 of 23 11.04.23
> 1). Wide input Freq. and Voltage Windows :
> Input Freq. : 45-65Hz
> Input Voltage : 120/140/160~288Vac
> (Depend on Loads; 0~33/33~66/66~100%)
High availability
Product Features
Slide 14 of 23 11.04.23
> 3 Selectable Operating Modes
Product Features
1). Normal UPS mode
2). CF50 – Frequency Converter 50Hz>60Hz
3). CF60 – Frequency Converter 60Hz>50Hz
Slide 15 of 23 11.04.23
Programmable Outlets
> Increased runtime for critical applications : Load shedding with programmable outlets.
Product Features
Slide 16 of 23 11.04.23
Product Features
>User Personalization
Select System Voltage
Voltage Configurations
UPS Modes
Fine Turning Of Output
Voltage
Bypass Voltage Tolerances
Synchronized Frequency
Windows
Slide 17 of 23 11.04.23
LED Indicators:LED Indicators: 1. LCD2. Utility 3. Programmable Outlet14. Programmable Outlet25. Bypass Range 6. Fault
Control Keypads:Control Keypads:
7. ON Key &Alarm Silence Key
8. OFF Key9. Function Key10. Down Key11. Up Key12. Enter Key
Optional LCD Control Panel
Product Features
Slide 18 of 23 11.04.23
> Multiple Communication Interface Standard Unit :
USB , RS232 and EPO
Optional Slot :1. WEB/SNMP Card
2. Dry Contacts Card
Product Features
Slide 19 of 23 11.04.23
> Communication Software:
Emily
UPSilon 2000
SNMP Net-Agent
Product Features
USB
RS-232
SNMP
Slide 20 of 23 11.04.23
Product Features
> Hot Swappable Internal Battery:
2 x Battery Pack inside[12V/9AH](3KVA)
Replaced from the Front
※ 1 Battery Pack = 3 × Battery Blocks
> Backup Time (Full Load) :
3KVA > 5 min.
Slide 21 of 23 11.04.23
Long Run Time Options > 1). Extended runtime capabilities with multiple
external battery cabinets (Optional)
> 2). Built in Fast Charger:
> 3). High Capacity Charger (Optional)
Product Features
Slide 22 of 23 11.04.23
Technical Specifications
1: Main’s input
1.1 Input topology Single phase
1.2 Input wiring 1 Ph (L/N)+ PE
1.3 Nominal Input voltage 220/230/240V
1.4 Nominal Input current 12.1A/11.6A/11.1A
1.5 Input Voltage Range 120-288V
50%.80%110761
Slide 23 of 23 11.04.23
Technical Specifications
2: Inverter Output
2.1 Maximum Appearance Power (VA)
3000
2.2 Maximum Active Power (W) 2400
2.3 Output Power Factor 0.8
2.5 Output Voltage 220V, 230V, 240V
2.6 Voltage Regulation +/-1 %
Slide 24 of 23 11.04.23
Technical Specifications
3: Battery Input
3.1 Nominal battery input voltage 6*12V 3000VA
3.2 Battery shutdown voltage 10.8V Long backup time
3.3 Maximum Battery Leakage Current during UPS is static state
<30uA
3.4
Slide 25 of 23 11.04.23
Have questions or some feedback?
Then feel free to contact me.
THANK YOU