PRODUCT WHITE PAPER www.elitescreens.com EliteScreensInc.|EliteScreens EuropeGmbH| EliteScreensIndia |EliteScreensChina Ltd. EliteScreensTaiwan Corp |EliteScreensJapan|EliteScreensAustralia EVANESCE PLUS SERIES Section 1: Screen Design 1.1 Type of product: Electric In-Ceiling Front Projection Screen. What is it for? The Evanesce Series is a large in-ceiling electric front projection screen using our GREENGUARD® Certified MaxWhite™ FG screen material. It is suitable for big size rooms. It is ideal the companion for medium to large size auditoriums, gymnasiums, banquet/reception rooms, and large home theaters. The product was design primarily for permanent in-ceiling concealed installations. It includes Infrared and Radio Frequency remote controls and a manual wall switch keypad. 1.2 How does it work? The Evanesce series has a trap door opening for allowing the screen to drop and conceals itself when the screen fully retracts. Electric motorized component is controlled byInfrared, Radio Frequency or Ethernet controls. Fully assembled unit ships ready to install, plug &play. Section 2: Control System 2.1 Infrared (IR) Remote Control Infrared functions by direct line of sight contact with a beam range of 30 feet (9.14m). For total control, we offer an optional Universal Learning Remote (ZR800D) to operate the screen with up to 8 other media devices simultaneously via its Macro function with a 30 foot (9.14m) range also 2.2 Radio Frequency (RF) Remote Control The RF remote operates in the same manner as an automatic garage door opener does. Because it uses radio waves instead of light, it does not require a direct line of sight to the control box and has a 150 foot (45.7m) range. Unlike the IR, it can also be used to control multiple screens simultaneously. These are popular for use in larger room environments such as educational, congregational or commercial presentations. 2.2.1 5-12V Trigger Most mid-high end projectors have a trigger port (5-12Volt port on the rear panel of the projector). This enables your screen's drop/rise cycle to function in perfect synchronization with your projector's power cycle. We have both a direct wire and RF wireless version of this device. We include it as a mandatory feature. The optional wireless 5-12V trigger device synchronizes the projection screen's drop/rise function with the projector's power cycle by means of an RF wireless control instead of a hardwire connection. The wireless unit is attached to the projector's 5-12 volt port and transmits the RF drop/rise command to the screen once the projector is switched on or off. 2.2.2 3-Way Wall Switch An In-Line 3-way wall switch is wired directly to the screen through an RJ45 port and controls the up, down & stop functions directly. It is intended to be an alternate form of control to the internal IR & RF receivers. Elite's new Wireless 3-way in-wall box does the same function relying upon its RF transmitter with an operational range up to 200 feet. It is equal to the wall box in function but without the presence of unsightly wires to connect it.
12
Embed
EVANESCE PLUS SERIES - staubcommercial.ca › pdf › sku › Evanesce_Plus_White_P… · Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
EVANESCE PLUS SERIES
Section 1: Screen Design
1.1 Type of product: Electric In-Ceiling Front Projection Screen.
What is it for? The Evanesce Series is a large in-ceiling electric front projection screen using our
GREENGUARD® Certified MaxWhite™ FG screen material. It is suitable for big size rooms. It is ideal the
companion for medium to large size auditoriums, gymnasiums, banquet/reception rooms, and large
home theaters. The product was design primarily for permanent in-ceiling concealed installations. It
includes Infrared and Radio Frequency remote controls and a manual wall switch keypad.
1.2 How does it work? The Evanesce series has a trap door opening for allowing the screen to drop
and conceals itself when the screen fully retracts. Electric motorized component is controlled byInfrared,
Radio Frequency or Ethernet controls. Fully assembled unit ships ready to install, plug &play.
Section 2: Control System 2.1 Infrared (IR) Remote Control
Infrared functions by direct line of sight contact with a beam range of 30 feet (9.14m). For total control,
we offer an optional Universal Learning Remote (ZR800D) to operate the screen with up to 8 other media
devices simultaneously via its Macro function with a 30 foot (9.14m) range also
2.2 Radio Frequency (RF) Remote Control
The RF remote operates in the same manner as an automatic garage door opener does. Because it uses
radio waves instead of light, it does not require a direct line of sight to the control box and has a 150 foot
(45.7m) range. Unlike the IR, it can also be used to control multiple screens simultaneously. These are
popular for use in larger room environments such as educational, congregational or commercial
presentations.
2.2.1 5-12V Trigger Most mid-high end projectors have a trigger port (5-12Volt port on the rear panel of the projector). This
enables your screen's drop/rise cycle to function in perfect synchronization with your projector's power
cycle. We have both a direct wire and RF wireless version of this device. We include it as a mandatory
feature. The optional wireless 5-12V trigger device synchronizes the projection screen's drop/rise
function with the projector's power cycle by means of an RF wireless control instead of a hardwire
connection. The wireless unit is attached to the projector's 5-12 volt port and transmits the RF drop/rise
command to the screen once the projector is switched on or off.
2.2.2 3-Way Wall Switch An In-Line 3-way wall switch is wired directly to the screen through an RJ45 port and controls the up,
down & stop functions directly. It is intended to be an alternate form of control to the internal IR & RF
receivers. Elite's new Wireless 3-way in-wall box does the same function relying upon its RF transmitter
with an operational range up to 200 feet. It is equal to the wall box in function but without the presence
of unsightly wires to connect it.
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
2.2.3 In-Wall RJ-45 Module The RJ-45 module connects to a local wall switch for UP/Down control of your Evanesce electric
projection screen.
2.2.4 Low Voltage Regulator Most electric screens function off of a 110-230Voltage and/or 5-12 DC Voltage power source. With a built
in low voltage regulator, you can save power and separate your DC voltage control system from your
Motor operation. This allows you to have more control options such as an extended 5-12V trigger or an
extended IR receiver from anywhere in the room. It also helps make control options such as a Universal
Learning Remote operate reliably. These are optional items with other manufacturers that we include in
the package.
2.3 Motor Specifications
Tubular Motor
Output
Current
Output
Speed
Output
Torque
Voltage Power Frequency Noise
Level
Insulation
Class
110V 1.18A 30r/min 8Nm 110V 130watts 60Hz 48db F
220V 0.64A 30r/min 8Nm 220V 140watts 50Hz 48db F
Section 3: Product Features
3.1 Characteristics
Screen Material
• GREENGUARD Certified MaxWhite™ FG 1.1 Gain black backed matte white screen material is durable and
easy to clean
• 180° wide-view angle for commercial and residential presentations
• Black masking borders enhance picture contrast
• 4K Ultra HD and Active 3D ready
• Available in 150”, 180”, and 200” diagonal sizes in 4:3 and 16:9 aspect ratios
• Flame Resistant: Complies with NFPA 701 Standards
Design and Installation
• Extra wide and heavy-duty aluminum housing is strong and moisture resistant
• Concealed in-ceiling recessed front projection screen for large size rooms
• Slideable top hanging brackets
• Above ceiling installation kit included
Control System
• Internal Radio Frequency/Infrared receivers with IR, RF remotes included
• Low voltage 3-way keypad wall switch
• RJ45 port allows 3rd
party control systems integration
• Optional wireless 5-12 volt trigger, Universal 5-12 volt trigger (for projectors that don’t have a trigger
output port) and In-wall switch
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Quality and Reliability
• Tubular motor allows swift operation with a superior weight tolerance and operational lifespan
• 2-year manufacturer’s warranty
• 3-year warranty for Government, Education, Military, and Religious organizations – US only
stiffness which provides the flattest possible non-
tensioned screen surface with universal applications.
This material provides wide viewing uniform diffusion
while giving precise definition, color reproduction and
black & white contrast. The screen surface has black-
backing to eliminate light penetration, is mildew
resistant and washable with mild soap and water.
Model Number Diag.
Size
Aspect
Ratio
Viewing
Height
(in)
Viewing
Width
(in)
Screen
Material Gain Seam Area
Case
Color
N.W.
(lbs)
G.W.
(lbs)
Packaging
Dimensions
(LxHxW)
IHome150VW2-E12 150" 4:3 90.0 120.0 MaxWhite™
FG 1.1 No Seam White 59.8 87.9 134"x11"x11"
IHome180VW2-E12 180" 4:3 108.0 144.0 MaxWhite™
FG 1.1 No Seam White 82.6 106.8 157.56"x11"x11.4'
IHome200VW2-E8 200" 4:3 120.0 160.0 MaxWhite™
FG 1.1
At Top Black
Drop White 109.4 127.4 173"x10.5"x11"
IHome150HW2-E12 150" 16:9 73.6 130.7 MaxWhite™
FG 1.1 No Seam White 66.8 79.4 157"x10.6"x11.2"
IHome180HW2-E12 180" 16:9 88.3 156.9 MaxWhite™
FG 1.1 No Seam White 78.7 112.6
171.7"x11.2"x11.8
"
IHome200HW2-E6 200" 16:9 98.0 174.0 MaxWhite™
FG 1.1 No Seam White 111.2 138.7 187.70"x10.5"x11"
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
*Manufacturer tips: This is an enhanced matte white product for higher end DLP/LCD projectors suitable
for commercial or residential presentations. The gain on this material is 1.1 and has a viewing angle of
180 degrees.
Features & Benefits
• Gain: 1.1
• Viewing Angle: 180°
• Black masking borders enhance picture contrast
• Flame Resistant
• Active 3D and 4K Ultra HD ready
• GREENGUARD®& GREENGUARD Gold® Certified
Specifications
Thickness 0.36 mm
Weight 350 g/m2
Maximum Height 3.2 M (10 ft)
On-axis Gain 1.0
Half-Gain Angle Does not reach half gain
4.2 Gain and Viewing Angle Chart
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Section 5: Execution
5.1 Pre-Installation
• Carefully unpack the screen.
• Always handle the screen in a leveled position on a clean surface.
• In order to protect the screen from exposure to stains, keep the screen out of contact with
foreign particles such as dust, sawdust, and/or liquids.
5.2 Submittals5.1 Submittals
• IR & RF Remote
• Batteries (AAA)
• 3-way wall switch
• 5-12V Trigger Cable
• IR “Eye” Receiver
• Bubble Leveler
• Users Guide
• In-wall RJ-45 module
• Product Catalog
Please make sure all parts listed below are included before proceeding with the installation. A. Hexagonal nut x 4 B. M6x13 hex screw x 8 C. Hanging bracket x 2 D. Washer x 12
E. Turnbuckle x 4 F. Suspension Bar x 4 G. M6 nut x 4 H. End cover flange panel
5.3 Installation
Power The Evanesce Plus Series includes a
3-Prong Power Cord for use in a non-
concealed power outlet. If your
installation will be entirely concealed
(including the power outlet), Elite
Screens strongly recommends a
hardwire connection. Please refer to
the image for both 110v & 220v
wiring information.
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Assembly
1. Insert the M6x13 hex screw (B) through the Hanging Bracket’s (C) screw hole and secure with
the Hexagonal nut (A). Slide the Hanging Bracket (C) through the railing on top of the case.
Repeat the same for the other side.
2. Attach the Turnbuckle (E) to the bottom of the Suspension Bar (F) and secure with the Hex
Screw (B), Washer (D) and Hex Nut (H).
3. Attach the Turnbuckle (G) to the Hanging Bracket (C) as shown in figure below. Install the
Suspension Bars (D) to your ceiling according to their distance.
B D D H
E
C
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
4. Attach the end flange piece (C) on the long edge of the housing as shown below to complete the assembly.
The screen is now ready for installation.
Side schematic diagram:
Rotate the turnbuckle
as needed to adjust
the height level.
Leaning the end flange piece and
put the bottom part so it may
insert into the housing groove. Push the end flange upwardsto allow the
top part and housing to come together.
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Accessories for Evanesce Plus Series
Control System for Evanesce Plus Series
Ceiling
End flange piece location
Attention:
1. The end flange panels can easily warp. Please be
careful when handling them and during installation.
2. Make sure the end flanges are properly installed
and leveled with the housing.
3. As a safety precaution four people are required
for this installation.
1. 5-12V Trigger: The built-in 5-12V trigger input
allows your screen to synchronize its drop & rise
with the projector’s power cycle. The screen
deploys when the projector powers up and will
retract when the projector powers down. The 5-
12 volt adaptor connects to your projector’s
trigger output via a separate cable that may or
may not be provided by the manufacturer of the
projector. The trigger feature will not work
without an output cable from the projector, but it
can be tested by connecting the Red (+) and
Green (-) cable to a 9-volt battery.
A. IR Remote B. RF Remote
D. 3-way
wall switch
E. IR eye
receiver
G. AAA
Batteries x 2
C. Remote
control base
x 2
G. Bubble
leveler
Red + Green -
F. 5-12v trigger cable
RJ45 input
5-12 VOLT TRIGGER CABLE
PRODUCT WHITE PAPER
www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia