EUROPEASIA NORTH AMERICA ASIA Arkema Inc.€¦ · FTIR (internal method) ASTM D1238 DSC ASTM D1525 ASTM E28 ASTM D638 ASTM D790 ASTM D2240 ASTM D1505 ISO 1133 ISO 11357-3 ISO 306

EUROPEASIA

Arkema France420 rue d’Estienne d’Orves92705 Colombes CedexFRANCE

Tel. : + 33 (0)1 49 00 80 80Fax : + 33 (0)1 49 00 83 96

NORTH AMERICA

Arkema Inc.900 First AvenuePA 19406 King of PrussiaPennsylvaniaUNITES STATES

Tel. : +1 (0)610 878 6500Fax : +1 (0)610 878 6400

ASIA

Arkema PTE LTD10 Science Park Road01-01A, Singapore Science Park IIThe ALPHA117684 SingaporeSINGAPORE

Tel. : +65 64 19 91 99Fax : +65 64 19 90 01

ETHYLENE COPOLYMERS

LET’SPROGRESSTOGETHER

Arke

ma,

Soc

iété

ano

nym

e au

capi

tal d

e 61

4 93

7 94

0 eu

ros

- 445

074

685

RCS

Nan

terre

Di

rcom

420

4E/0

3.20

11/1

0 - T

ech

- Pho

tos:

Ark

ema

- Duf

our C

omm

unic

atio

n -

420, rue d’Estienne d’Orves92700 Colombes - FranceTél. : 33 (0)1 49 00 80 80Fax : 33 (0)1 49 00 83 96www.arkema.com

The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods ofuse of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability as to any results obtained or arisingfrom any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANYOTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided hereinrelates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The usershould thoroughly test any application before commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not beconstrued as an inducement to infringe any patent and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result inpatent infringement. See MSDS for Health & Safety Considerations.

The information contained in this document is based on trials carried out by our Research Centres and data selected from the literature, but shall in no event be heldto constitute or imply any warranty, undertaking, express or implied commitment from our part. Our formal specifications define the limit of our commitment.No liability whatsoever can be accepted by Arkema with regard to the handling, processing or use of the product or products concerned which must in all cases beemployed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.

www.evatane.comwww.lotryl.com

A global chemical company and France’s leading chemicals producer, Arkema is building the future of the chemical industry every day.

Deploying a responsible, innovation-based approach, we produce state-of-the-art specialty chemicals that provide customers with practical solutions to such challenges as climate change, access to drinking water, the future of energy, fossil fuel preservation and the need for lighter materials.

With operations in more than 40 countries, 14,000 employees and 8 research centers, Arkema generates annual revenue of €5.9 billion and holds leadership positions in all its markets with a portfolio of internationally recognized brands.

The world is our inspiration.

Email : [email protected]

EVATANELOTRYL 2012 VR:Mise en page 1 18/02/12 18:36 Page1

ETHYLENE - ACRYLIC ESTER COPOLYMERS

ETHYLENE VINYL ACETATE COPOLYMERS

Specified properties* Typical properties Main applications

Comonomer Melt Melting Vicat Ring and ball Tensile strength Elongation Flexural Hardness

Density

Hot Films

Modification Bases Grades content index point softening temperature at break at break modulus

(g/cm3) Melt

Sheets Foams Coating Cables of thermoplastic

(%) (g/10 min) (°C) Temp. (°C) (°C) (MPa) (%) (MPa) Shore A Shore D Adhesives polymers

17BA04 16 - 19 3.5 - 4.5 93 60 - 15 700 45 - 32 0.93 • • • •

17BA07 16 - 19 6.5 - 8.0 93 60 - 14 700 40 - 30 0.93 • • • •

EBA 28 BA175 26 - 30 150 - 200 80 40 94 3 750 23 80 - 0.93 • •

30BA02 27 - 32 1.5 - 2.5 78 41 >190 6 850 9 75 - 0.93 • • • 35BA40 33 - 37 35 - 45 66 <40 110 2 300 - 70 - 0.93 • • • 35BA320 33 - 37 260 - 350 65 <40 85 1.5 200 - 52 - 0.93 • • 18MA02 17 - 20 2 - 3 83 53 - 13 700 50 - 25 0.94 • • • 20MA08 18 - 22 7 - 9 80 46 - 9 800 20 83 - 0.94 • •

EMA

24MA005 23 - 26 0.4 - 0.6 72 45 - 17 750 18 84 - 0.94 • • • • 24MA02 23 - 26 1 - 3 68 49 - 12 800 18 92 - 0.94 • 29MA03 27 - 31 2.0 - 3.5 61 <40 175 6 900 8 75 - 0.95 • • • • Bestpeel 2407 24 7 69 <40 - 8 750 14 79 22 0.94 • • •

Test Method FTIR (internal method) ASTM D1238 DSC ASTM D1525 ASTM E28 ASTM D638 ASTM D790 ASTM D2240 ASTM D1505

ISO 1133 ISO 11357-3 ISO 306 NF EN 1238 ISO 527 ISO 178 ISO 868 ISO 1183 EBA (Ethylene-Butyl Acrylate copolymer) EMA (Ethylene-Methyl Acrylate copolymer)

Specified properties* Typical properties Main applications Comonomer Melt Melting Vicat Ring and ball Tensile strength Elongation

Hardness

Density Hot

Films

Sound

Bases Grades content index point softening temperature at break at break (g/cm3)

Melt Sheets

Foams dampening

Bitumen Cables Crude Oil Ink Solar pannels (%) (g/10 min) (°C) Temp. (°C) (°C) (MPa) (%)

Shore A Adhesives

18-150 17 - 19 135 - 175 88 43 102 10 300 - 500 85 0.94 • • • 18-500 17 - 19 450 - 550 86 43 94 6 600 - 900 90 0.94 • • 20-20 19 - 21 17 - 23 83 46 127 17 400 - 600 89 0.95 • • • • 24-03 23 - 25 2.5 - 3.5 80 46 183 27 600 - 900 83 0.94 • • • • • 28-03 26 - 28 3 - 4.5 76 41 166 26 700 - 1000 82 0.95 • • • • • 28-05 27 - 29 5 - 8 72 40 160 24 700 - 1000 80 0.95 • • • • • 28-25 27 - 29 22 - 29 71 <40 120 14 800 - 1000 75 0.95 • • • • • 28-40 27 - 29 35 - 45 70 <40 106 10 800 - 1000 73 0.95 • • •

EVA 28-150 27 - 29 135 - 175 69 <40 95 8 400 - 600 71 0.95 • • •

28-420 27 - 29 370 - 470 66 <40 84 5 400 - 600 70 0.95 • • • • 28-800 30 - 32 700 - 900 63 <40 80 3 400 - 600 60 0.95 • • • 33-25 32 - 34 22 - 29 63 <40 119 11 900 - 1100 67 0.96 • • • 33-45 32 - 34 38 - 48 62 <40 107 9 900 - 1100 63 0.96 • • • 33-45 PV 32 - 34 38 - 48 62 <40 107 9 900 - 1100 63 0.96 • 33-400 32 - 34 350 - 450 63 <40 84 4 400 - 600 60 0.96 • 40-55 38 - 41 48 - 62 63 <40 97 7 900 - 1100 50 0.96 • • 42-60 >41 65 - 85 52 <40 95 5 900 - 1100 42 0.96 • • •

Test Method FTIR (internal method) ASTM D1238 DSC ASTM D1525 ASTM E28 ASTM D638 ASTM D2240 ASTM D1505

ISO 1133 ISO 11357-3 ISO 306 NF EN 1238 ISO 527 ISO 868 ISO 1183

* Properties routinely measured during the standard quality control procedure

EVA (Ethylene-Vinyl Acrylate copolymer)

EVATANELOTRYL 2012 VR:Mise en page 1 18/02/12 18:37 Page3

EUROPEASIA

Arkema France420 rue d’Estienne d’Orves92705 Colombes CedexFRANCE

Tel. : + 33 (0)1 49 00 80 80Fax : + 33 (0)1 49 00 83 96

NORTH AMERICA

Arkema Inc.900 First AvenuePA 19406 King of PrussiaPennsylvaniaUNITES STATES

Tel. : +1 (0)610 878 6500Fax : +1 (0)610 878 6400

ASIA

Arkema PTE LTD10 Science Park Road01-01A, Singapore Science Park IIThe ALPHA117684 SingaporeSINGAPORE

Tel. : +65 64 19 91 99Fax : +65 64 19 90 01

ETHYLENE COPOLYMERS

LET’SPROGRESSTOGETHER

Arke

ma,

Soc

iété

ano

nym

e au

capi

tal d

e 61

4 93

7 94

0 eu

ros

- 445

074

685

RCS

Nan

terre

Di

rcom

420

4E/0

3.20

11/1

0 - T

ech

- Pho

tos:

Ark

ema

- Duf

our C

omm

unic

atio

n -

420, rue d’Estienne d’Orves92700 Colombes - FranceTél. : 33 (0)1 49 00 80 80Fax : 33 (0)1 49 00 83 96www.arkema.com

The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods ofuse of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability as to any results obtained or arisingfrom any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANYOTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided hereinrelates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The usershould thoroughly test any application before commercialization. Nothing contained herein constitutes a license to practice under any patent and it should not beconstrued as an inducement to infringe any patent and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result inpatent infringement. See MSDS for Health & Safety Considerations.

The information contained in this document is based on trials carried out by our Research Centres and data selected from the literature, but shall in no event be heldto constitute or imply any warranty, undertaking, express or implied commitment from our part. Our formal specifications define the limit of our commitment.No liability whatsoever can be accepted by Arkema with regard to the handling, processing or use of the product or products concerned which must in all cases beemployed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.

www.evatane.comwww.lotryl.com

A global chemical company and France’s leading chemicals producer, Arkema is building the future of the chemical industry every day.

Deploying a responsible, innovation-based approach, we produce state-of-the-art specialty chemicals that provide customers with practical solutions to such challenges as climate change, access to drinking water, the future of energy, fossil fuel preservation and the need for lighter materials.

With operations in more than 40 countries, 14,000 employees and 8 research centers, Arkema generates annual revenue of €5.9 billion and holds leadership positions in all its markets with a portfolio of internationally recognized brands.

The world is our inspiration.

Email : [email protected]

EVATANELOTRYL 2012 VR:Mise en page 1 18/02/12 18:36 Page1