European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m multi-purpose DP2 cable installation vessel which can perform a variety of installation, handling, burial and cable protection tasks for the Offshore Renewables, Telecommunications and Oil and Gas sectors. The cable installation systems have been specifically designed to facilitate a wide range of inter-array and telecommunications cables. The main cable-handling machinery is housed inside the hanger-deck providing a safe and comfortable environment for the operation and maintenance of the cable equipment. A dedicated ROV hanger is located on the port side which can house a work-class ROV and associated launch and recovery systems. Trenching equipment, jetting ROVs and cable burial ploughs can be handled by the stern-mounted A-Frame. Key Vessel Features and Capabilities ROV Hanger Accommodation for 59 persons total 5,000 tonne under deck cable capacity Power cable loading arm 30 tonne A-frame A telecoms cable jointing space and associated Test Room are situated in the hanger Spare cable tanks (telecoms) and plentiful rope storage tanks A 60t SWL active heave compensated crane A 50t SWL tow winch is fitted below the aft working deck Global Maritime Excellence
4
Embed
European Supporter - P&O Maritime Supporter - MEAE - Euro… · European Supporter Vessel Specification Sheet Multi-Purpose DP2 Support Vessel The CS European Supporter is a 106m
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
European SupporterVessel Specification Sheet
Multi-Purpose DP2 Support VesselThe CS European Supporter is a 106m multi-purpose DP2cable installation vessel which can perform a variety ofinstallation, handling, burial and cable protection tasks for theOffshore Renewables, Telecommunications and Oil and Gassectors.
The cable installation systems have been specificallydesigned to facilitate a wide range of inter-array andtelecommunications cables. The main cable-handlingmachinery is housed inside the hanger-deck providing a safeand comfortable environment for the operation andmaintenance of the cable equipment.
A dedicated ROV hanger is located on the port side which canhouse a work-class ROV and associated launch and recoverysystems. Trenching equipment, jetting ROVs and cable burialploughs can be handled by the stern-mounted A-Frame.
Key Vessel Features and Capabilities� ROV Hanger
� Accommodation for 59 persons total
� 5,000 tonne under deck cable capacity
� Power cable loading arm
� 30 tonne A-frame
� A telecoms cable jointing space and associated Test Room are situated in the hanger
Pitch Propellers (3900mm Diameter)Rudders 2 x Becker Rudders
Fuel Consumption*Full Speed 20m3 per dayService Speed 12m3 per dayDP Mode 10m3 per dayHarbour Mode 3m3 per day
SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE *All performance figures quoted are nominal, actual dependant on prevailing environmental conditions at time of operation.
Deck Machinery Main Crane TTS Offshore Crane, 60T SWL Active
Taut Wire System Kongsberg Light Weight Taut WireSystem MK 15/300
Gyro Compasses 3 x Sperry Navigat Mk 1 Motion Reference Units 2 x MRU type 2 + 1 x MRU type 5Wind Sensors 2 x Wind Gill + 1 x Wind Sensor OMC
Other MachineryROV Hanger 70m2 floor area. Seating for ROV LARS,
Winches and ancillary equipment.Facilities for Work Class ROV and 2 x 20ft containers. 5m wide and 9.5mhigh clear opening (roller shutter door). Air supply 6.9 Bar. Fresh water supply.
Towing Winch 3500mm of 40mm Dia Wire CableHaul Force - 350kN (Top Layer)Haul Speed - 30m/min @ 100kN(Mid Layer)Rendering Force - 100-500kNRendering Speed - 60m/min @ 100-500kN
Capacities Fuel Oil 1746 m3
Ballast 2978 m3
Fresh Water 464 m3
P&O Maritime Tel: + 353 91 773980Parkmore Business Park West, Fax: + 353 91 393656Galway, Email: [email protected]. www.pomaritime.com