European Standard EN 10219-2 - Главная - dominant.ltd.uadominant.ltd.ua/Doc/EN10219-2.pdf · ICS 77.140.75 Descriptors: Hollow sections, structural steelwork, tolerances. Kaltgefertigte
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegiertenBaustählen und aus Feinkornbaustählen – Teil 2: Grenzabmaße,Maße und statische Werte
European Standard EN 10219-2 : 1997 has the status of a DIN Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by ECISS/TC 10.The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl (Steeland Iron Standards Committee), Technical Committee Hohlprofile.
AmendmentsDIN 59411, July 1978 edition, has been superseded by the specifications of EN 10219-2. The scope of thestandard has been extended to cover circular sections of diameters 21,3 to 1 219 mm (cf. table 6). Speci-fications for concavity and convexity have been included.
Previous editionDIN 59411: 1978-07.
Ref. No. DIN EN 10219-2 : 1997-11English price group 15 Sales No. 1115
Kaltgefertigte geschweißte Hohlprofilefür den Stahlbau aus unlegierten Bau-stählen und aus Feinkornbaustählen –Teil 2: Grenzabmaße, Maße und stati-sche Werte
This European Standard was approved by CEN on 1997-06-22.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.
EN 10219-2
August 1997
Central Secretariat: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung
|ÈÉË
Profils creux soudés pour la construc-tion finis à froid en aciers de construc-tion non alliés et à grains fins – Partie 2:Tolérances, dimensions et caractéris-tiques du profil