Educational Programs for Engineers and Managers in Rubber Industries EUROPE Rubber Processing Education Week 2014 Corporate Sponsors 10-11 November 2014 Rubber Compound Formulation Design Instructor: Dr. Hans-Joachim Graf, Germany (9am to 5pm) (Training Program) (Advanced) Registration Fee: 1,250 €/person (1,700 US$/Person) (Participants will receive Graf Compounder Software) 10-11 November 2014 Molding of Rubber & Rubber Mold Design Instructor: Van Walworth, USA (9am to 5pm) (Training Program) Registration Fee: 900 €/person (1, 220 US$/person) (Participants will receive “Rubber Molding Principles” Book) 12 November 2014 Cost Reduction in Rubber Processing Invited Speakers (9am to 5pm) (Conference) Registration Fee: 750 €/person(1,020 US$) (Participants will receive “Cost Reduction in Rubber Processing” Book) 13-14 November 2014 Rubber Rheology Instructor: Henri Burhin, Belgium (9am to 5pm) (Training Program) Registration Fee: 800 €/person (1,090 US$/Person) 13 November 2014 Design of Experiments in Rubber Compound and Process Development Instructor: Dr. Hans-Joachim Graf, Germany (9am to 5pm) (Training Program) Registration Fee: 500 €/person (680 US$/Person) 14 November 2014 Injection Cold Runner Blocks for Rubber Injection Instructor: Van Walworth, USA (9am to 12pm) (Training Program) Registration Fee: 400 €/person (545 US$/person) 14 November 2014 Mold Fouling: Reasons and How to Fix Instructor: Dr. Hans-Joachim Graf, Germany (2pm to 5pm) (Training Program) Registration Fee: 400 €/person (545 US$/person) 10-14 November 2014 Frankfurt a.M., Germany Mövenpick Hotel Frankfurt City Organized by Dr. Hans-Joachim Graf TechnoBiz USA Inc. Who should join? • Engineers / Technical Managers • R & D Personnel • Quality Control & Assessors • Factory Managers • Technical Service Team
4
Embed
Europe Rubber Week 2014 - VKRT Rubber Week 2014.pdf · • Rubber Compounding Principles ... This includes both plastics and rubber whether as pure materials or fully ... (Please
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Educational Programs for Engineers and Managers in Rubber Industries
EUROPE
Rubber Processing
Education Week 2014 Corporate Sponsors
10-11 November 2014
Rubber Compound Formulation Design Instructor: Dr. Hans-Joachim Graf, Germany
• Solubility of Ingredients and It Effect on Mold Fouling
• End Groups of Polymers Regarding Mold Fouling
• Process Conditions Supporting Mold Fouling
• · Checklist of Ingredients to Avoid Mold Fouling
INSTRUCTORS
HENRI BURHIN: Mr. Henri G. Burhin is presently retired from Alpha Technologies (former Monsanto Instrument and Equipment). His previous
responsibility was application research for the Monsanto Rubber Chemical group. His area of expertise is Polymer testing with
elastic property measurements. This includes both plastics and rubber whether as pure materials or fully compounded. In his career in
Monsanto/Alpha Technologies/Dynisco, he technically supported the sales organization with special emphasis on rheological too
customers such as the major tire manufacturers or polyolefin multinational suppliers. He also participated in the latest deve
RPA2000 instrument towards higher productivity, sensitivity, accuracy and novelty. He acquired a wide expe
also quoted as “FT-Rheology”. He has been working in close collaboration with the UCL (Université Catholique de Louvain) Belgium in the
polymer department for seven years working on thermoplastics, composites and Pre
and has been speaker at several international conferences around the world. He has been Application Specialist for all Alpha
POLYTEST for Europe/Africa, Asia and Indian sub-continent area. He is graduated in chemistry.
VAN WALWORTH: Van Walworth is a product design and development specialist. A primary application of his skills is focused on products
related to the rubber, plastic, & pipe industries. In many circles he is known as “The Ideaguy or as The Rubber Whisperer”. His career spans over
thirty five years practicing product R&D, tool & equipment design, process establishment & improvement, troubleshooting, prob
project management, and spontaneous creativity. Walworth has been a full
time consulting, Walworth held corporate positions with several companies including, Parker
Company, and Thunderline Corp., Reeves Rubber and American Cast Iron Pipe Company. To date, nine product patents have been i
on his work, with over a dozen additional patents currently pending. Walworth is an international
published works. He has conducted seminars and conferences for professionals and technical training in the USA, Thailand, Ma
Germany, Italy, India, Sri Lanka, and Canada. In addition to running a priva
active technical speaker for both college and post-graduate level instruction as well as at both professional industry and in
Walworth holds a BS degree in Mechanical Engineering Drafting and Design from the University of Alabama.
DR. HANS-JOACHIM GRAF: Hans-Joachim Graf has over thirty years experience in the rubber industry. He was first with manufacturing
companies for pharmaceutical and technical rubber parts. He then jo
shoe machines responsible for process development, followed by RheinChemie as senior manager of material developments for rub
After Cooperstandard Automotive (CAN), division of profile extrusion, as a director of materials he is today with WOCO (GE), a manufacturer of
injection molded parts in charge for material development and process design. Mr. Graf has authored over 60 publications and
presentations and invented more than 15 patents. He has given a rubber technology course for graduates at University of Waterloo and is
teaching courses in recipe design and industrial bonding at University of Hannover (GE) continuing education department. He i
American Chemical Society, Deutsche Chemische Gesellchaft and Deutsche Kautschuk Gesellschaft. He received his diploma degree from
University of Mainz and his doctorate in polymer chemistry from University of Freiburg, both Germany.
Conference 2012) he was awarded with the Erich-Konrad Medal of the DKG (German Rubber Society).
HOTEL- Mövenpick Hotel Frankfurt City Address: Den Haager Strasse 5 | 60327 Frankfurt am Main | Germany
Tel: +49 69 788 075 0 |
www.moevenpick
Accommodation
Special Rates for Delegates: 150
(Please refer “Europe Rubber Week” to make booking.)
“Corporate Sponsorship” Opportunity: 1500 • Insertion of company logo as “Corporate Sponsor” on the backdrop
• Insertion of company brochure in the document bag
• 10% discount on the registration fee for delegates nominated
• Insertion of logo in electronic brochure (PDF format)
• 1-complimentary ticket for “Cost Reduction “ Conference on 12 Nov ‘14
• Insertion of company logo on handout cover page of each seminar
Publications for Rubber Industries by TechnoBiz• Rubber Molding Principles
• Cost Reduction in Rubber Processing
• Rubber Molding Process Troubleshooting Charts
is presently retired from Alpha Technologies (former Monsanto Instrument and Equipment). His previous
responsibility was application research for the Monsanto Rubber Chemical group. His area of expertise is Polymer testing with emphasis on visco
roperty measurements. This includes both plastics and rubber whether as pure materials or fully compounded. In his career in
Monsanto/Alpha Technologies/Dynisco, he technically supported the sales organization with special emphasis on rheological tools at
customers such as the major tire manufacturers or polyolefin multinational suppliers. He also participated in the latest development on the
RPA2000 instrument towards higher productivity, sensitivity, accuracy and novelty. He acquired a wide experienced in non-linear viscoelasticity,
Rheology”. He has been working in close collaboration with the UCL (Université Catholique de Louvain) Belgium in the
polymer department for seven years working on thermoplastics, composites and Pre-Preg and Nano fillers. He holds 2 patents and several papers
and has been speaker at several international conferences around the world. He has been Application Specialist for all Alpha Technologies product range and Dynisco
continent area. He is graduated in chemistry.
Van Walworth is a product design and development specialist. A primary application of his skills is focused on products
pipe industries. In many circles he is known as “The Ideaguy or as The Rubber Whisperer”. His career spans over
thirty five years practicing product R&D, tool & equipment design, process establishment & improvement, troubleshooting, problem solving,
ject management, and spontaneous creativity. Walworth has been a full-time consultant for the past eleven years. Prior to commencing full
time consulting, Walworth held corporate positions with several companies including, Parker-Hannifin, Wynn’s Precision, Ashtabula Rubber
Company, and Thunderline Corp., Reeves Rubber and American Cast Iron Pipe Company. To date, nine product patents have been issued based
on his work, with over a dozen additional patents currently pending. Walworth is an internationally recognized technical educator with
published works. He has conducted seminars and conferences for professionals and technical training in the USA, Thailand, Malaysia, France,
Germany, Italy, India, Sri Lanka, and Canada. In addition to running a private product design and development prototype shop, Walworth is an
graduate level instruction as well as at both professional industry and in-plant venues.
ng Drafting and Design from the University of Alabama.
Joachim Graf has over thirty years experience in the rubber industry. He was first with manufacturing
companies for pharmaceutical and technical rubber parts. He then joined DESMA a manufacturer of Rubber Injection molding and polyurethane
shoe machines responsible for process development, followed by RheinChemie as senior manager of material developments for rubber industry.
n of profile extrusion, as a director of materials he is today with WOCO (GE), a manufacturer of
injection molded parts in charge for material development and process design. Mr. Graf has authored over 60 publications and
ore than 15 patents. He has given a rubber technology course for graduates at University of Waterloo and is
teaching courses in recipe design and industrial bonding at University of Hannover (GE) continuing education department. He is a member of the
can Chemical Society, Deutsche Chemische Gesellchaft and Deutsche Kautschuk Gesellschaft. He received his diploma degree from
University of Mainz and his doctorate in polymer chemistry from University of Freiburg, both Germany. During DKT'12 (German Rubber
Konrad Medal of the DKG (German Rubber Society).
Mövenpick Hotel Frankfurt City Den Haager Strasse 5 | 60327 Frankfurt am Main | Germany