EURO RIG™ • 350 mt Highly mobile Land Rig for small and sensitive locations For decades drilling rigs have been seen as noisy, polluting and dangerous work places. This picture has changed since safety and environmental concerns became part of the daily operation. There is a land drilling rig that represents this change most – the EURO RIG™ 350 mt AC. This modular built drilling rig is engineered with a fast-move philosophy. It has been developed in close liaison with our customers, to fulfill the special requirements of the European market. The box-on-box substructure enables efficient rig moves on European road with standard trucks. The modular substructure consists of four boxes and five drill floor parts with integrated drilling equipment like rotary table, roughneck, winches, hydraulic cathead, HP manifold, tong post etc. These boxes are used to house noise emitting components, such as the centralized hydraulic power unit. The integration of drilling equipment in substructure boxes and on drill floor parts reduces significant the rig move times, since the equipment remains installed and internally connected during road transport. The vertical lift mast consists of four units with an A-frame. The dimensions of the main mast parts are reduced to European road transport limitations. Integrated hydraulic winches ensure the vertical mast lift.There are no exceptional road permissions required, except for drawworks and mud pumps. The equipment fitted to the rig allows performance drilling; a good choice for our customers. The overall required rig location size is minimal, as all ancillary equipment is placed very compact around the rig. The EURO RIG™ 350 mt is built in compliance to the latest European regulations; low emission and fully ATEX certified. The maximum sound level is 55 dBA in one hundred meters distance to noise sources. The small foot print of 40 x 55 meters reduces pad construction cost significantly. The containerized substructure, vertical lift mast, modularized mud tank system and optimized transport units allow for moving the approx. 60 truck loads of the EURO RIG™ 350 mt within five days. The main drilling equipment is AC driven but can be delivered as DC upon customer’s request. The EURO RIG™ 350 mt is designed by Bentec’s engineering team to meet customer’s needs and resulted in the fabrication of the most modern European land drilling rig. EURO RIG 350 mt_1109 Rig Building Mechanics Electrics Repair Consulting Quality Projects Engineering