XXX 2013 Slide1 ETX-1300 Eran Kovalsky Product Line Manager [email protected] Version 2.0 – General Availability April-2013
Feb 25, 2016
XXX 2013 Slide1
ETX-1300
Eran KovalskyProduct Line [email protected]
Version 2.0 – General AvailabilityApril-2013
XXX 2013 Slide2
Agenda
• Introduction• Applications• Product overview• Main features and benefits• Management • Summary
XXX 2013 Slide3
ETX-1300 Product Introduction
• High density Ethernet aggregation device– NNI: 4xGbE Combo ports– UNI: 32xFE RJ-45/SFP ports
• Resiliency– LAG– G.8032 ERP
• OAM– IEEE 802.3ah
• HW design– Compact design – 1RU– Dual Power supply
36 Ethernet ports in a 1-RU 19” enclosure
XXX 2013 Slide4
ETX-1300 Physical View
• Redundant pluggable power supply and fans units− DC: 24/48VDC− AC: 100–240VAC, 50-60Hz
32xFE portsCopper (RJ-45) or Fiber (SPF)
Alarm Relay port
4xGbE Combo ports
Out Of Band Eth Management port
Station clock (in/out)
ETX-26 Product presentation Slide 5
Market Segment
• Service Providers – Basement managed device– Fiber aggregation– Saving expensive ports on PE
• Carriers– Simple, robust and secure L2 Access network– Traffic separation to VLANs– Resilient Ring Topology– Dual Power supply– Synchronization
ETX-26 Product presentation Slide 6
Multiple business services in MTU
• High port capacity• Small footprint• Robust design • Ring or linear topology• QoS
ETX-1300
ETX-1300
GbE G.8032
RingETX-1300Metro
FE
FE
FE
FE
Customer Equipment
ETX-26 Product presentation Slide 7
Access Aggregation
• Access built from Linear and ring topologies• Small footprint • Link OAM• Timing capabilities
PSNETX-5300 ETX-1300
ETX-1300
ETX
ETX
ETX
FE
FE
FE
GbE G.8032
RingETX-1300
GbEETX-5300
Link OAM
ETX-26 Product presentation Slide 8
Ethernet over T3 aggregation
• Aggregating up to 32 MIRICi-T3/FE to GbE network• Interoperability opposite RAD RIC products• Fully managed solution (single IP)• High-Power PS required
ETX-1300 + NxMIRICi-T3
RICi
SONET
RICi
T3
T3
RICiT3
T3
FE
FE
FE
PSN GbE
RADview
XXX 2013 Slide9
Ver 1.1 FeaturesFeature Description Customer Benefits36 Ethernet Ports • 4xGbE (SFP/UTP)
• 32xFE (SFP or UTP)• Mix of Fast and Gigabit Ethernet ports for flexible
connectivity
ERPS ITU-T G.8032 • Ethernet ring protection switching per G.8032
• Up to 16 nodes in a ring
• Sub-50ms switching time
• Enables link resiliency to ensure high survivability and service continuity
• Detects and recovers link failures in sub-50ms assuring instant switchover to the alternate link without service interruption
• Suitable for small-network connectivity, such as university campuses, hospitals, and multi-buildings, corporate or enterprises
• Standard solution
Ethernet Bridging and Switching
• 802.1D switching (VLAN-unaware)
• 802.1Q switching (VLAN-aware)
• 802.1QinQ (VLAN stacking)
• Internal bridge operating in VLAN-aware and VLAN-unaware modes for transparent bridging
• Flexible bridging configuration supporting any Layer 2 network
XXX 2013 Slide10
Ver 1.1 Features cont.Feature Description Customer BenefitsQoS • 4 priority queues configurable to strict
priority and WRR
• Classification per:
• Port
• Pbit
• IP Precedence
• DSCP
• Ingress/Egress Rate Limit
• User traffic can be classified according to VLAN P-bit to distinguish between higher and lower priority traffic
• ETX-1300 is equipped with 4 separated queues to prioritize user traffic and allow mission critical applications to be served first
SNTP• Simple Network Time Protocol support
for retrieving time & date from an SNTP server
• Network-wide time reference for effective troubleshooting
• No need for manual time configuration of each new device on the network
• Centralized management of daylight saving time changes
Link Aggregation (LAG) • 802.3ad compliant link aggregation (LAG),
with/without LACP • Enables redundancy on network port and LACP for easy
interoperability opposite other devices
802.3ah OAM • Ethernet link OAM based on 802.3ah
(IEEE 802.3 2005) ‐
• Conformity with other network equipment • Passive link layer OAM, responds to loopback requests
XXX 2013 Slide11
Ver 1.1 Features cont.Feature Description Customer BenefitsSecurity • SSH
• RADIUS• ETX-1300 features security access features: Secured Telnet
access via SSHv2 and RADIUS authentication system.
Management • Menu driven terminal
• TFTP
• SNMP v1 and SNMP v2c
• Statistics collection
• Out-of-band mgt port
• In-band mgt
XXX 2013 Slide12
Bridging and Switching
• Working modes:– VLAN-unaware bridging– VLAN-aware bridging (802.1Q and 802.1p)
• MAC entries: 8K• Static and/or dynamic learning• Frame support up to 2048 bytes• Transparent to all Ethernet control protocols except
– Flow control can be peered or discarded
XXX 2013 Slide13
Quality of Service
• 4 Classes of Service per port• Mapping to CoS per:
– Port– 802.1p– IP Precedence– DSCP
• Queues scheduling:– Strict priority– Strict priority and WRR
• Rate Limitation– Ingress/Egress– User or network ports
ETX-26 Product presentation Slide 14
System Timing
• Clock sources– Internal – GE (SyncE Rx line clock)– External
• The system clock has master and fallback sources.
• External Clock Interface– Input (station) clock signal– Output clock. – Interfaces:
• Nominal clock frequency: 2.048 MHz• RJ-45 connector. • Two BNC connectors
XXX 2013 Slide15
Ethernet Ring Protection Switching
Feature Benefit
G.8032v1 Ethernet Ring Protection Switching (ERPS)
Standard solution enabling link resiliency to ensure high survivability and service continuity
Sub-50ms switching time Assuring instant switchover to the alternate link without service interruption
Up to 16 nodes in a ring Suitable for small-network connectivity, such as university campuses, hospitals, and multi-buildings, corporate or enterprises
ETX-1300
ETX-1300
GbE G.8032
RingETX-1300
XXX 2013 Slide16
Management
BROAD PERSPECTIVE. DIRECT CONTROL.
RADview-EMS is a unified carrier-class management platform for RAD devices using a variety of access channels as SNMPv1/3, HTTP/S, TFTP and Telnet/SSH. In
addition, it features third-party device monitoring capabilities
XXX 2013 Slide17
Management, Benefits & Features
●Turnkey system including hardware and software!
●Fully compliant with TMN standards
●Client/server architecture with multi-user support
●Interoperable with third-party NMS and leading OSS systems
●IBM Tivoli’s Netcool®/OMNIbus™ plug-in
●Minimize integrations costs associated with new NE additions
Benefits
●Ensures device health and congestion control
●Topology maps and network inventory
●Advanced FCAPS functionality
●Software & configuration management
●Business continuity - High-Availability and Disaster Recovery
●Handover between operators
Key features
XXX 2013 Slide18
RADview-EMS advanced FCAPS
Fault management
• Detects and isolates faults in network devices, initiates remedial actions and distributes alarm messages to other management entities in the network.
Configuration management
• Enables operators to configure, install and distribute software to all devices across the network. In addition, the system tracks version changes and maintains software configuration history
Accounting management
• Manages individual and group user accounts and passwords, generating network usage reports to monitor user activities.
Performance management
• Supports real-time monitoring of QoS and CoS, producing real-time and periodic statistics. The statistics collector compresses data to minimize bandwidth use for management traffic and exports CSV files to OSS or third-party management systems
Security management
• Allows network administrators to track user activities and control the access to network resources with a choice of security features
XXX 2013 Slide19
Device Management
• ETX-1300 supports the following management capabilities
●SNTP●Menu driven terminal●TFTP●SNMP v1 and SNMP v2c●Statistics collection●Out-of-band mgt port●In-band mgt
Device Management
XXX 2013 Slide20
Value Proposition
Network Resiliency
• Ethernet Ring Protection • Link Aggregation
Carrier grade design
• Redundant Power supplies • External Alarm Relay • Replaceable fan tray • Timing interfaces
Robust Ethernet service
• User traffic prioritization for assuring SLA of mission critical applications • Optimized product configuration, monitoring and maintenance using in-band or out of band management • Clock distribution
XXX 2013 Slide21
www.rad.com
Thank You For Your Attention