-
9 RIPT 2019LES RENCONTRES INTERNATIONALES DE LA PROJECTION
THERMIQUE11th – 13th December • Forschungszentrum Jülich, Germany
Program
PARTNERS
CONTACT
Prof. Dr. Robert Vaßen Forschungszentrum Jülich GmbH Institute
of Energy and Climate Research Materials Synthesis and Processing
(IEK-1) Tel: +49 2461 61-6108 [email protected]
CONFERENCE VENUE
Forschungszentrum Jülich GmbH Wilhelm-Johnen-Straße · 52428
Jülich, Germany
PUBLICATION DETAILS
Published and printed by: Forschungszentrum Jülich GmbH • 52425
Jülich, Germany; Picture (title): Prof. Dr. Holger Kaßner
(Hochschule Aschaffenburg),
FURTHER INFORMATIONwww.fz-juelich.de/ript2019
-
Sessions:
Solution and suspension spraying
Characterization of coatings (2)
Materials for spraying: powders, suspensions
Applications of coatings
EDUCATIONAL COURSE
Sessions: Characterization of coatings (1)
Simulation and modeling
GENERAL ASSEMBLY ETSA
Sessions: Post spray treatment
Coatings in energy conversion
Process diagnostics
Functional coatings and biomaterials
Reading Room
Coffee breaks
Lunch
Poster session
DOC’S CAFE
ROOM209
ROOM 338
REGISTRATION
MAIN ENTRANCE
LECTURE HALL
FLOOR PLAN – CENTRAL LIBRARY
GROUND FLOOR
1ST FLOOR
WEDNESDAY, DECEMBER 11TH, 2019
CENTRAL LIBRARY, ROOM 20909:00 Welcome
Lech Pawłowski, Georg Mauer
09:15 Physical methods of fi lm and coating depositionLech
Pawłowski
10:15 Microstructure of sprayed coatings: particularities,
usefulness and methods of characterization Chang-Jiu Li
11:15 Coffee break
11:30 Physical properties and characterization of thermal spray
coatingsChristopher Berndt
12:30 Lunch break (Seecasino)
13:45 Evolution of thermal spray technology and of its
applicationsShrikant Joshi
14:45 Coffee break
IEK-1, BUILDING 1.3. CENTRAL LIBRARY ROOM 338
RWTH AACHEN15:00 Walk to IEK-1
15:15 Demonstrations (Hall 2)Experimental demonstration of fi lm
and coating technologies as well as diagnostic methodsGeorg
Mauer
4th General Assembly of the European Thermal Spray
Association
Lab tour 16:00
16:30 Final Discussion (Room 234)
16:45 Bus-transfer to Aachen
18:00 Bus-transfer to Aachen 18:00
19:00 Welcome reception: forum M, Aachen 19:00
20:30 End 20:30
Exhibition
EDUCATIONAL COURSETHERMAL SPRAY TECHNOLOGY: position among fi
lms and coatings technologies, coatings characterization and
application, and technology’s future
ETSA IOT
Opening
Sessions: Cold spray and other kinetic processes
Spray processes and coatings
Closing
-
THURSDAY, DECEMBER 12TH, 2019 – CONFERENCE PROGRAM
LECTURE HALL ROOM 209 DOC’S CAFE ROOM 338 (2ND FLOOR)
09:10 OPENING, EXHIBITION TEASER, ORGANIZATIONAL ADVICES
09:10
09:40 COLD SPRAY AND OTHER KINETIC PROCESSES (1)Chair: Heli
Koivuluoto Recent achievements in high-kinetic HVAF sprayed
coatings – the spray process, spraying parameters, coating
structures, properties and industrial applicationsP. Vuoristo
(invited), Tampere University
CHARACTERIZATION OF COATINGS (1)Chair: Wolfgang Tillmann
Interfacial damaging of ceramic coatings investigated by
non-destructive imaging methodsV. Guipont (invited) PSL Research
University
SOLUTION AND SUSPENSION SPRAYING (1)Chair: Andreas Killinger
Tailored coating architectures for emerging applications through
axial suspension plasma sprayingN. Markocsan (invited)University
West Trollhättan
POST SPRAY TREATMENTChair: Shrikant Joshi Combined surface
technologies for enhanced properties of thermal spray coatingsT.
Lampke (invited)Technische Universität Chemnitz
09:40
10:10 Study of AlSi10Mg coatings by high-velocity oxy-air fuel
(HVOAF) for future repair applications A. N. Gomez, M. Parco, G.
Barykin, C. Vaquero Fundación Tecnalia
Flash-pulse thermographic methods of thickness inspection of
thermally sprayed coatingsM. Svantner, L. Muzika, S. Houdková
University of West Bohemia
P. Frkova Research and Testing Institute Plzeň
Which benefits of hydrogen in a segmented-anode plasma torch in
suspension plasma spraying?S. Goutier, E. Hartikainen, A. Dolmaire,
M. Vardelle, P.M. GeffroyUniversité de Limoges
A. JouliaSafran Tech
Single crystalline repair of Ni-based superalloy using
directional grain growthT. Kalfhaus, R. VaßenForschungszentrum
Jülich
10:10
10:30 Influence of surface preparation on coatings produced by
cold gas sprayJ. Fiebig, R. VaßenForschungszentrum Jülich
J. GibmeierKarlsruhe Institute of Technology
R. Brandt Rolls-Royce Deutschland Ltd & Co. KG
Analysis of induced residual stresses ceramic coatings by means
of in-situ non-contact surface displacement measurements in the
nanometric range with laser material removal and digital holography
under industrial conditionsV. Martinez Garcia, G. Pedrini, P.A.
Mora Pinto, A. Killinger, R. Gadow, W. Osten, S. Schmauder
Universität Stuttgart
Microstructure and bioactivity of solution precursor plasma
sprayed 45S5 glass coatings from feedstocks with different
concentrationD. Borghi, S. Morelli, V. Testa, G. Bolelli, L.
LusvarghiUniversità degli Studi di Modena e Reggio Emilia
(UNIMORE)
E. Cañas, M.J. Orts, E. Sánchez Jaume I University
Precipitation hardening of HVOF-sprayed IN625 coatings by
boridingT. Lindner, M. Löbel, T. LampkeChemnitz University of
Technology
10:30
10:50 Coffee break (foyer) Coffee break (foyer) 10:50
11:20 Spraying Strategies for Cold Spray Additive
ManufacturingH. Wu, X. Xie, M. Liu, C. Verdy, H. Liao, S. Deng
Université de Bourgogne Franche-Comté
On the roughness of plasma-sprayed bond-coats in thermal barrier
coatings: the current view of the problem and experimental
observationsK. Slámečka, D. Jech, S. Tkachenko, L. Klakurková, L.
Čelko Brno University of Technology
Understanding the formation mechanism of ZnO films composed of
well-shaped nanostructures by SPPS routeZ. Yu, M. Liu, M. Moliere,
H. LiaoUniversité de Bourgogne-Franche-Comté
Influence of heat treatment and friction stir processing on
microstructure and mechanical properties of cold sprayed Cu/SiC
composites coatingH. Hammoud, V. Bezrukova, A. Sova, ENISEZ.
Bensaid, G. Kermouche, H. Klöcker, C. Bosch, EMSEN. Texier-Mandoki,
ANDRA
11:20
11:40 Additive Manufacturing of Steels by Using Cold Spray
Technology for Repair Applications in Tool IndustriesR. Singh, J.
Kondás, C. Bauer, L. Loidl Impact Innovations GmbH
CMAS corrosion of conventional atmospheric plasma sprayed (APS),
dense-vertically cracked (DVC) and suspension plasma sprayed (SPS)
YSZ thermal barrier coatings (TBCs)S. Morelli, G. Bolelli, L.
Lusvarghi, V. TestaUniversity of Modena and Reggio Emilia
N. Antolotti, O. LigabueTurbocoating S.p.A
E. Molinari, L. RighiUniversity of Parma
Application of direct laser interference patterning (DLIP) on
the development of advanced suspension sprayed TiO2 coatingsF.L.
Toma, S. Alamri, T. Kunze, B. Leupolt, M. Barbosa, W.
GrählertFraunhofer Institute for Material and Beam Technology
Effect of oxidation post treatments on R-VLPPS TiO2 coatingM.
Planche, X. Fan, G. Darut, H. Liao, G. MontavonUTBM
J. IlavskyArgonne National Laboratory
11:40
12:00 Damage mechanisms in cold sprayed copper coatingC. Huang,
F. Gärtner, T. KlassenHelmut Schmidt University
Y. Xie, R. Huang Guangdong Institute of New Materials
S. Aude UC Louvain
Suspension plasma spray fabrication of black titanium dioxide
photocatalytic coatings with visible light absorption
performancesH. Li (invited), M. Zhai, Y. Liu, J. HuangChinese
Academy of Sciences
COATINGS IN ENERGY CONVERSIONChair: Sanjay Sampath Plasma
Sprayed W-based Composites and Alloys for Fusion Applications
J. Matějíček (invited), M. Vilemova, J. Klecka, J. Cizek, R.
Musalek, K. Illkova, J. Veverka, F. LukacCzech Academy of
Sciences
S. Heuer, D. Dorow-GerspachForschungszentrum Jülich
D. Moskal, J. MartanUniversity of West Bohemia
12:00
12:20
12:30 Lunch break, exhibition, poster session (foyer) Lunch
break, exhibition, poster session (foyer) 12:30
-
LECTURE HALL ROOM 209 DOC’S CAFE ROOM 338 (2ND FLOOR)14:00 COLD
SPRAY AND OTHER KINETIC
PROCESSES (2)Chair: Vincent Guipont Composite coatings with high
ceramic content deposited by low pressure cold sprayS. Kozerski
(invited), A. Małachowska , M. Winnicki, E. HarapińskaWrocław
University of Technology
No session SOLUTION AND SUSPENSION SPRAYING (2)Chair:
Filofteia-Laura Toma Tailored microstructures from suspension and
solution precursor high velocity oxy-fuel (SSP-HVOF) thermal
sprayT. Hussain (invited), F. Venturi, T. Owoseni, D.
Tajero-MartinUniversity of Nottingham
COATINGS IN ENERGY CONVERSIONChair: Sanjay Sampath
An overview on Materials, Manufacturing, Modelling and Testing
of Gas Turbine Abradable Seal CoatingsL. Čelko (invited), D. Jech,
K. Slámečka, P. Skalka, P. Komarov, J. Kaiser, Brno University of
Technology
14:00
14:30 Deposition of cermet coatings by cold gas sprayingM. Tului
(invited), A.L. Marino, S. Lionetti, R. PileggiCSM SpA
Development of Suspension Flame Sprayed Metal Doped Calcium
Phosphate Coatings for bone implantsA. Killinger (invited), P.
Krieg, R. Gadow, Universität StuttgartA. Bernstein, University of
Freiburg
Similarities and differences in the design, development and
commercialization of advanced TBCs and environ-mental barrier
coating materialsM.R. Dorfman (invited), D. Chen, D. Dwivedi,
Oerlikon Metco (US) Inc.
14:30
15:00 The Optimization of Microstructures and Mechanics of
WC-10Co-4Cr Coatings via a Novel Liquid Fuel HVOF TorchS. Liu, H.
Liao, M. MoliereUniversity of Technology of Belfort-Montbeliard
High Velocity Suspension Flame Sprayed (HVSFS) Chromium oxide /
chromium carbide coatings for tribological applicationsM. Blum, A.
Killinger, R. GadowUniversity of Stuttgart
Environmental Barrier Coatings for SiC/SiC CMCsE. Bakan, D.E.
Mack, R. Vaßen, Forschungszentrum JülichD. Koch, German Aerospace
Center (DLR)W. Kunz, H. Klemm Fraunhofer Institute for Ceramic
Technologies and Systems
15:00
15:20 Coffee break (foyer) Coffee break (foyer) 15:20
15:50 Synthesis and development of nanostructured Ni-Zn-Al2O3
high-pressure cold spray 3D freeform cellular structuresJ. Sripada,
G. SahaUniversity of New Brunswick
No session CHARACTERIZATION OF COATINGS (2)Chair: Christopher
Berndt High-temperature wear behaviour of AlCoCrFeNiTi coatings
produced by HVOFM. Löbel, T. Lindner, T. Lampke, TU Chemnitz
Influence of Thermal Exposure on Microstructure of Multilayered
Thermal Barrier Coatings Deposited by Hybrid Water-Stabilized
PlasmaR. Musalek, T. Tesar, J. Medricky, F. Lukac, J. Cizek, S.
Csaki, T. Chraska Czech Academy of Sciences
15:50
16:10 Balanced strength-ductility in cold sprayed metal matrix
composite via powder design, process optimization and post
treatmentX. Xie, H. Wu, C. Verdy, H. Liao, Univ. Bourgogne
Franche-ComtéC. Chen, Shanghai UniversityY. Wang, W. Wang, Xi'an,
University of Architecture and TechnologyZ. Chen, Shanghai Jiao
Tong UniversityG. Ji, Univ. Lille
Stress-Strain Behavior, Fracture Toughness and Crack Growth Rate
of RF Plasma Sprayed Self Standing Tungsten DepositsO. Kovarik, J.
SieglCzech Technical University
J. Cizek, J. Klecka, T. ChraskaCzech Academy of Sciences
Superior performance of standard and columnar structured YSZ
thermal barrier coatings combined with advanced bond coatsC.
Vorkötter, O. Guillon, R. VaßenForschungszentrum Jülich
16:10
16:30 Influence of hot isostatic pressing on structure and
properties of stainless steel, titanium and Ti6Al4V cold spray
depositsA. Sova, I. SmurovNational Engineering School of
Saint-Etienne (ENISE)
P. Petrovskiy, A. Travyanov National University of Science and
Technology MISIS
Investigations of TiO2 addition in alumina-titania APS sprayed
coatings on wear and cavitation erosion resistanceL. Łatka, M.
Michalak, P. Sokołowski, A. AmbroziakWrocław University of Science
and Technology
M. Walczak, M. Szala Lublin University of Technology
Effect of metal modification on the properties of APS lanthanum
doped strontium titanate based SOFC interconnectorC.J. Li, X. Chen,
S.L. Zhang, C.X. Li Xi'an Jiaotong University
16:30
16:50 Preliminary studies of TiO2 coatings deposition onto ABS
polymer substrates by low pressure cold sprayingM. Winnicki, A.
Baszczuk, L. Łatka, M. Jasiorski, A. Mancki, A. MałachowskaWrocław
University of Science and Technology
Investigation of Al2O3 coating properties obtained by various
liquid feedstock thermal spray processesM. Michalak, P. Sokołowski,
L. Łatka Wrocław University of Science and TechnologyF.L. Toma,
Fraunhofer-Institut für Werkstoff- und StrahltechnikH. Myalska, H.
Ageorges, A. Denoirjean, Université de LimogesS. Björklund,
University West Trollhättan
PROCESS DIAGNOSTICSChair: Armelle Vardelle Shadowgraphy for
High-Power High-Flow SPS ProcessesR. Trache, N. Curry, Treibacher
Industrie AGR. Musalek, T. Tesar, Czech Academy of Sciences
16:50
17:10 Metallization of Carbon Fiber-reinforced Polymers by a
Combined Coating Process: Electroplating and Cold SprayP. Fallah,
H. Che, S.Yue, McGill UniversityA. McDonald, University of
Alberta
Wetting behavior of wear resistant cermet coatings produced by
HVOFP. Komarov, D. Jech, S. Tkachenko, K. Dvořák, L. ČelkoBrno
University of Technology
Cold-Sprayed Stainless Steel Coatings: Process Optimization by
Online Spray MonitoringH. Koivuluoto, Tampere University J. Larjo,
Oseir, G. Pulci, F. Marra, Sapienza University of Rome M. Trebala,
S.P. Hannula, Aalto University
17:10
17:30 Comparison of HVOF sprayed alumina coatings produced with
different powder and suspension feedstock materialsK. Müller-Roden,
A. Wank, GTV Verschleiss-Schutz GmbHK. Dittrich, J. Wilden,
University of Applied Sciences Niederrhein
Microstructure and mechanical properties of Fe-based metallic
glass coatings prepared with laser claddingA. Malachowska, M.
Winnicki, A. Ambroziak Wrocław University of Science and Technology
G. Paczkowski, T. Lampke, Chemnitz University of Technology
Study of particles flux in coaxial laser cladding with variation
of injection conditionsA. Kulish, M. Doubenskaia, I. Smurov, A.
Sova, ENISEP. Petrovskiy, MISIS
17:30
17:50 Bus transfer to Aachen Bus transfer to Aachen 17:50
20:00 Dinner at restaurant Elisenbrunnen, Aachen Dinner at
restaurant Elisenbrunnen, Aachen 20:00
-
FRIDAY, DECEMBER 13TH, 2019 – CONFERENCE PROGRAM
LECTURE HALL ROOM 209 DOC’S CAFE ROOM 338 (2ND FLOOR)09:00 SPRAY
PROCESSES AND
COATINGS (1)Chair: Petri Vuoristo
Potentials and effects in the processing of fine and nano-
structured WC-Co powders by means of HVOF sprayingW. Tillmann
(invited), I. Baumann, C. Schaak, L. HagenTU Dortmund
University
SIMULATION AND MODELING (1)Chair: Simon Goutier Dealing with
conflicting objectives: DC plasma jet stability and less electrode
erosionA. Vardelle (invited), C. Chazelas, R. Zhukovski, V.
RatUniversity of Limoges
MATERIALS FOR SPRAYING: POWDERS, SUSPENSIONSChair: Nicolaie
Markocsan Thermal sprayed coatings of the Al2O3-TiO2 systemL.
Berger (invited), S. ConzeFraunhofer Institute for Ceramic
Technologies and Systems A. Richter, Y.J. Sohn, R. Vaßen,
Forschungszentrum Jülich
FUNCTIONAL COATINGS AND BIOMATERIALS (1)Chair: Šárka Houdková
Plasma sprayed transition metal oxides and associated
patterned/layered devices for thermoelectric waste energy
harvestingS. Sampath (invited), F. Caliari, H. Lee, Stony Brook
University
09:00
09:30 HVOF and HVAF processing of critical materials-free
TiC-NiCr coatingsV. Testa, G. Bolelli, L. Lusvarghi, S. Morelli, P.
Puddu, E. Righetti,University of Modena and Reggio Emilia; A.
Colella, MBN Nano- materiali S.p.A.; P. Sassatelli, Il Sentiero
International Campus s.r.l.
Continuum breakdown conditions in low power PS-PVD systemD.
Ivchenko, G. Mariaux, A. Vardelle, IRCERL. Hallo, CEA CESTA
Ternary Oxide Coatings of the System Al2O3-Cr2O3-TiO2 – A Study
of PropertiesS. Conze, L.M. Berger, Fraunhofer Institute for
Ceramic Technologies and SystemsM. Grimm, G. Paczkowski, TU
Chemnitz
Effect of feedstock and plasma gun on deposition of bioactive
glass coatingsE. Cañas, M.J. Orts, E. Sánchez, Jaume I UniversityH.
Ageorges, Université de Limoges
09:30
09:50 Tailoring structure of RF-ICP tungsten coatingsJ. Klecka,
J. CizekCzech Academy of Sciences
R. ZlatnikBrno University of Technology
Analysis and modeling of physical and chemical phenomena
occurring at solution plasma spraying of zirconia coatingsL.
Pawlowski, V. Tobon, G. Lecomte-Nana, C. Constantinescu, B.
Pateyron, Université de Limoges
Comparison of high temperature oxidation and hot corrosion
behaviors of thermal barrier coatings (TBCs) and steelmaking slag
coatingsA.C. Karaoglanli, M. Oge, M.B. Celik, Bartin University
Nanostructured hydroxyapatite coatings deposited by in-situ shot
peening assisted cold spraying for bio- medical applicationsY. Liu,
H. LiChinese Academy of Sciences
09:50
10:10 A study of Cr3C2-based coatings: Microstructure,
properties and performanceV. Matikainen, H. Koivuluoto, P. Vuoristo
Tampere University
Numerical and experimental study of the deposition of WC-Co
particles by cold sprayG. Bolelli, L. Lusvarghi, T. Manfredini,
University of Modena and Reggio Emilia S. Dosta, J.M. Guilemany, I.
Garcia Cano, Universitat de Barcelona
Thermal plasma processing of NiTi powders for the fabrication of
NiTi shape memory foils by RF-ICP MethodS. Samal, J. Klecka, J.
Cizek, O. Tyc, O. Molnarova, F. Lukac, P. Sittner, T. Chraska
Fyzikální ústav AV ČR
Structure and mechanical properties of bioactive
glass/yttria-stabilized zirconia coating co-sprayed by atmospheric
and suspension plasma sprayingÓ. Rojas, H. Ageorges, Université de
LimogesM. López, F. Vargas, University of Antioquia
10:10
10:30 The HVOF sprayed superalloy coatings for high temperature
applicationsŠ. Houdková (invited), Z. Česánek, Research and Testing
Institute PlzeňM. Bystriansky, M. Vostřák, University of West
BohemiaF. Lukáč, Czech Academy of Sciences
Modeling and Simulation of a Cascaded Plasma GeneratorK. Bobzin,
W. Wietheger, M. A. Knoch, H. Heinemann (invited) RWTH Aachen
University S. Zimmermann, J. Schein, Lab for Plasma Technology and
Mathematics (LPT), University of Federal Forces Germany, Munich
Baghdadite Coatings for Biomaterial ApplicationC.C. Berndt
(invited), D.Q. Pham, A.S.M. Ang Swinburne University of
TechnologyU. Gburec, University of WürzburgH. Zreigat, University
of Sydney
10:30
11:00 Coffee break (foyer) Coffee break (foyer) 11:00
11:30 SPRAY PROCESSES AND COATINGS (2)Chair: Jiří Matějíček
Plasma spraying of alumino-silicates and aromatic poly- ester as
pore former for thermal insulating applicationsV. Fournier, A.
Quet, E. Meillot, E. Hervé, CEA Le RipaultH. Ageorges, University
of Limoges
SIMULATION AND MODELING (2)Chair: Giovanni Bolelli Influence of
binding energy on particle impact behavior in Aerosol DepositionB.
Daneshian, F. Gärtner, D. Höche, T. Klassen, Helmut Schmidt
UniversityH. Assadi, Brunel University London
APPLICATIONS OF COATINGSChair: Lutz-Michael Berger Influence of
the finish-machining by turning and diamond smoothing on the
tribological properties of Fe17Cr2Ni0.2C thermally sprayed
coatingsT. Grund, G. Paczkowski, H. Liborius, A. Nestler, T.
Lampke, A. SchubertChemnitz University of Technology
FUNCTIONAL COATINGS AND BIOMATERIALS (2)Chair: Hua Li In-vitro
test evaluation of bioactive glass coatings obtained by APS and
CGSB. Garrido, R.L. García, J. Fernández, S. Dosta, I.G. Cano
University of Barcelona
11:30
11:50 Influence of spray gun parameters on in-flight particle
characteristics, the splat morphology distribution, and properties
of plasma-sprayed YSZ coatingsO. Khalil, W. Tillmann, M.
AbdulgaderDortmund University
Combination and Application of Two Data Processing Methods in
High Velocity Oxygen Fuel (HVOF) Thermal Spray TechnologyM. Liu, Z.
Yu, Y. Zhang, H. Wu, H. Liao, S. Deng Université de Bourgogne
Franche-Comté
Wear behaviour at high temperature of YSZ plasma sprayed
coatings and an electro-melted AZS refractoryD. Franco, H.
Ageorges, Université de Limoges M. López, F. Vargas, University of
Antioquia
Microstructural investigation of self-healing thermal barrier
coatings deposited by using hybrid and inter- mixed plasma spraying
conceptsP. Sokołowski, M. Hassanzadeh, M. Saremi, Z. Valefi, R.
Musalek, F. Lukac, Wrocław University of Science and Technology
11:50
12:10 Transplantation of thermally sprayed oxide ceramic
Alumina/Titanium dioxide coatings onto CFPR – manufacturing and
physical propertiesC. Semmler, S. Popa, R. Gadow, University
Stuttgart
Erosion performance of carbide-laden coatings deposited using a
hand-held high-velocity air-fuel (HVAF) spray gunL. Baiamonte, S.
Mahade, S. Björklund, S. JoshiHögskolan Väst, U. Klement, Chalmers
University of Technology
Heating behaviour of plasma sprayed TiOx/Cr2O3 coatings for
injection mouldingA. Schacht, K. Bobzin, W. Wietheger, M.A. Knoch
RWTH Aachen University
12:10
12:30 Surface Preparation for Thermal/Cold Spray Metallization
of Polymers M. Chen, H. Che, S. Yue McGill University
Property Prediction of Cold Gas Sprayed High Strengths MetalA.
List, F. Gärtner, T. Klassen Helmut Schmidt University
Coatings for Increased Efficency in Compression Ignition Engines
– Coating Development, Open Issues, and Performance UpdatesJ.
Saputo, C. Schmidt, S. Sampath, Center of Thermal Spray Research,
E. Gingrich, M. Tess, US Army CCDC-GVSC
12:30
12:50 CLOSING REMARKS 13:15 Official inauguration of the Jülich
Thermal Spray Center (JTSC) with snacks and drinks and subsequent
lab tour Official inauguration of the Jülich Thermal Spray Center
(JTSC) with snacks and drinks and subsequent lab tour 13:15
-
POSTER PROGRAM
POSTER SESSION THURSDAY, DECEMBER 12TH 2019, 12:30 – 14:00
P1Effect of CGS process parameters on the quality and effi
ciency of CGS polymeric coatingsN. Salazar, V. Gomez, A.M. Martos,
S. Dosta, I. Garcia-Cano, Universitat de Barcelona
P2Mechanical properties of TiO2 coatings sprayed onto aluminium
substrate by low pressure cold sprayingM. Winnicki, A. Baszczuk, L.
Łatka, J. Marek, A. Małachowska, Wrocław University of Science and
Technology
P3Mechanical and microstructural properties of cold sprayed
samples for additive manufacturingS. Lett, A. Quet, E. Meillot, CEA
Le RipaultS. Hemery, P. Villechaise, J. Cormier, École nationale
supérieure de mécanique et d‘aérotechnique
P4Engineering zirconia coating microstructures by using
saccharides in aqueous suspension plasma spraying feedstocksV.
Carnicer, M.J. Orts, E. Sanchez, Instituto Universitario de
Tecnología CerámicaR. Moreno, Instituto de Cerámica y Vidrio
P5Comparison of Hot Corrosion, CaO-MgO-Al2O3-SiO2 (CMAS) attack
and High Temperature Wear Behavior of YSZ, YSZ/Gd2Zr2O7 and
YSZ/La2Zr2O7 Thermal Barrier Coatings (TBCs) K.M. Doleker, A.C.
Karaoglanli, Y. Ozgurluk, M. Oge, Bartin University
P6Protecting the submicron SiC particles and whisker as healing
agents for thermal barrier coatings using a sol-gel produced Al2O3
coatingP. Sokołowski, M. Hassanzadeh, M. Saremi, Z. Valefi , R.
Musalek, T. Tesar, Wrocław University of Science and Technology
P7Infl uence of thermal spray-coatings on termite resistance of
woodH. Myalska, A. Denoirjean, S. Goutier, University of LimogesM.
Kutnik, L. Podgorski, FCBA
P8
Abrasive wear performance of novel fl ame sprayed NiCrSiBFeC/SiC
composite coatingH. Carvajal Fals, Oriente UniversityL. Fanton,
University of CampinasM.J. Xavier Belém, C.R. Camello Lima,
Methodist University of Piracicaba – UNIMEPS. Dosta, I. Garcia
Cano, University of Barcelona
P9Development, optimization and characterization of NiCrBSi-TiB2
fl ame-sprayed vacuum fused coatingsN. Kazamer, P. Valean, D.T.
Pascal, R. Muntean, G. Marginean, Westphalian University of Applied
SciencesV.A. Serban, University Politehnica Timisoara
P10Infl uence of laser treatment on residual stress in cold
sprayed Cr3C2-Ni20Cr/Ni-graphite coatingsA. Góral, Polish Academy
of SciencesW. Żórawski, M. Makrenek, Kielce University of
Technology
P11Mechanical properties of Cr3C2-Ni20Cr/Graphite cold sprayed
coatings after laser treatment W. Zórawski, M. Makrenek, D. Sobon,
Kielce University of TechnologyA. Góral, Polish Academy of
Sciences
Posters are displayed for the whole conference duration. Best
posters will be awarded at the conference dinner.
CONFERENCE CHAIRS
Lech Pawłowski, University of Limoges, France Robert Vaßen,
Forschungszentrum Jülich, Germany
LOCAL CONFERENCE ORGANIZERS
Beate SchmitzSandra SchädelGeorg MauerOlivier GuillonDetlev
StöverDaniel E. MackEmine BakanDenise KochJochen Fiebig
Oseir
Impact
Oerlikon
Forschungszentrum Jülich
SCIENTIFIC COMMITTEE
Ambroziak, Andrzej, Wroclaw Univ. Technology, Poland
Berger, Lutz-Michael, IKTS, Dresden, Germany
Berndt, Christopher, Swinborne University, Hawthorn,
Australia
Bobzin, Kirsten, RWTH Aachen, Germany
Bolelli, Giovanni, University of Modena, Italy
Čelko, Ladislav, Ceitec, Brno, Czech Republic
Clyne, Bill, University of Cambridge, United Kingdom
Fauchais, Pierre, University of Limoges, France
Guilemany, Josep María, CPT, Barcelona, Spain
Guipont, Vincent, Ecole Du Mines, Paris, France
Joshi, Shrikant, University West, Trollhättan, Sweden
Killinger, Andreas, University of Stuttgart, Germany
Klassen, Thomas, Helmut-Schmidt-Universität, Hamburg,
Germany
Klement, Uta, Chalmers University, Sweden
Kuroda, Seiji, NIMS, Tsukuba, Japan
Lampke, Thomas, TU Chemnitz, Germany
Li, Hua, Ningbo Inst. Mat. Sci. Engn. China
Lima, Carlos, University UNIMEP, Sao Paulo, Brazil
Lusvarghi, Luca, University of Modena, Italy
Matějíček, Jiří, IPP, Prague, Czech Republic
Mebdoua, Yamina, CDTA, Alger, Algeria
Nylén, Per, University West, Trollhättan, Sweden
Sampath, Sanjay, Stony Brook, New York, USA
Tillmann, Wolfgang, TU Dortmund, Germany
Toma, Filofteia-Laura, Fraunhofer IWS, Dresden, Germany
Vardelle, Armelle, University of Limoges, France
Vuoristo, Petri, TUT, Tampere, Finland
Wielage, Bernhard, TU Chemnitz, Germany
Xiao, Ping, University of Manchester, United Kingdom
PUBLICATION
The manuscripts of all oral presentations and of selected poster
contributions can be published in a special issue of Surface and
Coatings Technology (Elsevier). For further information see the
journal’s website (https://ees.elsevier.com/surfcoat). The
editorial system will be open for submission from Dec 15, 2019, to
March 31, 2020. The manuscripts will be refereed according to the
standards of this journal.
Oseir
Impact
EXHIBITORS
DOWNLOAD CONFERENCE PRESENTATIONS
The conference participants will get access to a password
protected area on the conference website, where the presentations
will be provided.
Oerlikon