This is not a do-it-yourself guide to repair the Magneti Marelli Electronic Throttle Module but it is a project I worked on to see if I could adapt an off-the-shelf throttle position sensor to this particular ETM. The project may be of interest to anyone interested in learning more about this ETM. The ETM is a crucial safety component so a home DIY fix like this is certainly not recommended, I would recommend going to the dealer or Xemodex if you’re having any issues with this ETM. Figure 1 Vishay Throttle Position Sensor prior to modification for Magneti Marelli retrofit. With some modification (cut off the mounting flange) this sensor fits well in the center area of the ETM end plate.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
This is not a do-it-yourself guide to repair the Magneti Marelli Electronic Throttle
Module but it is a project I worked on to see if I could adapt an off-the-shelf throttle
position sensor to this particular ETM. The project may be of interest to anyone
interested in learning more about this ETM. The ETM is a crucial safety component so a
home DIY fix like this is certainly not recommended, I would recommend going to the
dealer or Xemodex if you’re having any issues with this ETM.
Figure 1 Vishay Throttle Position Sensor prior to modification for Magneti Marelli retrofit. With
some modification (cut off the mounting flange) this sensor fits well in the center area of the ETM