ETI the One Stop Service Center Overview

7/25/2019 ETI the One Stop Service Center Overview

1/33

2013

Eurotechnology International Co. Ltd.

June 2013

The Eurotechnology GroupsOne Stop Shop Solution to Field

Tubular Inspection, Machining

and Accompanying Services


2/33

Page 1 of 32

P.O Box: 4275

Al Khobar 31952

Kingdom of Saudi Arabia.

Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496

Email: [email protected]

Web:www.eurotechhnologygroup.com

Eurotechnology International Co. Ltd is Registered in theKingdom of Saudi Arabia;

Capital SAR 8,000,000: CR No. 2051049665 & Branch CRNo 2052002032

Table of Contents

Overview .............................................................................................................................. 3

Total Tubular & Drilling Equipment Management Services:................................................. 5

Business Line Descriptions.................................................................................................... 6

Inspection Services ............................................................................................................... 6QA/QC & 3rd Party Surveillance Services ................................................................................... 6Rig Inspection Services ............................................................................................................... 6Miscellaneous Inspection Services ............................................................................................. 7

Machine Shop & Welding Services ....................................................................................... 7Threading .................................................................................................................................. 7Tungsten Redress ...................................................................................................................... 7General Machining & Repairs ..................................................................................................... 7Hardbanding Services ................................................................................................................ 7

Rental Tools and Equipment ................................................................................................ 8

NDT Training ......................................................................................................................... 8

NDT Level III Service ............................................................................................................. 9

Engineering& Technical Support ........................................................................................ 10Inspection Services ............................................................................................................. 11

Portable Drill Pipe Inspection Systems ........................................................................................ 14Inspection of BHA's, Fishing Equipment and other Rotary Equipment ........................................ 15Rig Inspection ............................................................................................................................. 16

Machine Shop & Related Services ...................................................................................... 17Repair of Tubulars ....................................................................................................................... 17Refurbishment of Rotary Tools ................................................................................................... 17Local Manufacturing: .................................................................................................................. 17Tubular Repair: ........................................................................................................................... 18

Thread repairs or new cuts ......................................................................................................... 19Breakout, Refurbish and Makeup Services ......................................................................... 21

Refurbishment and Repair of Pressure Control and related Equipment: ........................... 22Sub Arc Welding .......................................................................................................................... 23Vertical and Horizontal Turning .................................................................................................. 23
http://www.eurotechhnologygroup.com/http://www.eurotechhnologygroup.com/http://www.eurotechhnologygroup.com/http://www.eurotechhnologygroup.com/


3/33

Page 2 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Welding Services ................................................................................................................ 24Tungsten Redressing/Hard facing ............................................................................................... 24Stabilizers redressing .................................................................................................................. 24Grinding Services ........................................................................................................................ 25General Welding ......................................................................................................................... 25Stress Relieving / Post weld Heat Treatment: ............................................................................. 26

Hardbanding Services ......................................................................................................... 27

Refurbishment of Handling Equipment and Manual Rig Tongs .......................................... 28

Shot/GRIT Blast Bay: .......................................................................................................... 29

Spray Painting Area: ........................................................................................................... 29

Pressure Testing ................................................................................................................. 30

Wire Rope Sling Testing ...................................................................................................... 31

In Conclusion ...................................................................................................................... 32


4/33

Page 3 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Overview

The Eurotechnology Group is the oil and gas industrys leading independentprovider of inspection technologies, innovated threading systems and relatedequipment required to establish a one stop solution to the inspection, repair andrefurbishment of tubulars, drilling, completion and related equipment andaccessories.

The one stop solution is targeted generally at the drilling contractor, smalleroperating companies and service companies trying to reduce overhead and focus

on their core competencies, rather than expending energies on support servicesto their operations.

The one stop shop solution offers the customers the following advantages fromjust one source:

1. One service entity to interface with assigned focal point2. Logistical support from the dock to the yard, to the rig and back to base.3. Tubular Management system, Storage and material tracking systems4. Servicing, repair and refurbishment of drill strings and BHA tools5. Oilfield Machine Shop Services

6.

Refurbishment, assembly and testing of completion assemblies7. Tungsten redress welding services8. General welding and fabrication services9. Procurement and Supply of tubulars, drilling and completion equipment10.Rental of drill strings, BHA and related equipment.

The customer by taking the one stop shop approach is able to leave a good partof its operational support to one qualified service company which is in turnallows the client to focus on what it does best.

To facilitate a fast set up of a field support services operation, Eurotechnology

has developed a containerised approach to the various inspection, threading anddrilling tool refurbishment requirement. This enables the equipment to beassembled and tested at the plant before being shipped. This also allows for thetraining of personnel on the actual equipment that they will help set up and thenoperate in a field environment.

While the service equipment is being manufactured and assembled ready forshipment, the local service company would prepare the infrastructure as definedby Eurotechnology so when the shipment(s) arrive on location the installationand commissioning times are very time efficient and the operation is made readyto service its customers in as short a time as possible.


5/33

Page 4 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





As the machine shop operation develops and moves to offering the customer amore specialised service offering such as the local manufacture of products asindicated later in this overview and the operation undertakes more specializedservices such as refurbishment of pressure control and related equipment amore permanent facility will be required to better control the environment andprotect the assets that are not designed to cope with field type operations.

For the end user that prefers amore permanent approach tothe facility, Eurotechnology

would undertake to work withthe customer on the design ofthe different structuresrequirement and assisttechnically as the constructiontakes place.

The Eurotechnology Group isflexible in how it works with thedifferent service providers thatwish to leverage of theconsiderable experienceEurotechnology has in its groupand to this end we are verywilling to work with the enduser on a solution that suits thebusiness model they envision.


6/33

Page 5 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





The Eurotechnology Group One Stop Shop ServiceConcept

Total Tubular & Drilling Equipment Management Services:

Supply Chain;

o Procurement of tubulars, tools, equipment and products to the oil

and gas industry

Rental:

o Short to long term rental of Tubulars, BHA, Tools and Equipment

Advanced Inspection Services:

o Drill Strings & BHA

o Casing and Tubing

o QA/QC & 3rdParty Inspection Services

o

Rig Based Inspections Refurbishment & Repairs:

o Machine shop services

o Hardbanding services

o Tungsten Redress

o Welding Services

Logistic Control / Material Management:

o State of the art tracking systems, Material Reporting & Web based

proprietary Material Tracking system

Storage(when available):

o Facilities for clients including 24/7 recordable video surveillance

o Short and long term storage for the end users

o Specially designed storage racking systems

o Load in / load out and transportation organised for the end user


7/33

Page 6 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Business Line Descriptions

Inspection Services

State of the art electromagnetic and propriety technology fulllength ultrasonic inspection services:

Drill Stem and its BHA Rotary Tool Components Oil Country Tubular Goods (Casing & Tubing) Tubing Work Strings Line Pipe

Drilling Tool and Equipment Inspection

Completion Assemblies & associated components Rotary Drill Stem Products and Specialty Tools Non-magnetic BHA equipment Directional, Electric Wire Line & Slick line packages

QA/QC & 3rd Party Surveillance Services

Vendor Inspection Services Quality Assurance & Quality Control 3rd Party Surveillance Mill Surveillance Inspection

Rig Inspection Services

API 14 Derrick surveys utilising Rope Access LOLER Lifting surveys controlled and monitored via Data Base Extensive Hull, Tank & Deck Gauging Surveys Top Drive, Travel Block & Crown Block Inspections Dolly track alignment Rig Wide Surveys Pad eye Recertification Crane Pedestal/Boom Inspections Various NDT Techniques utilising Rope Access Chain Inspections Spud Can Inspections

Leg & Chord Inspections via Rope Access


8/33

Page 7 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Miscellaneous Inspection Services

Material Analysis Video Boroscope Inspection Field Gradient Inspections (Hot Spot Testing) Hardness Testing Photographic Logging

Machine Shop & Welding Services

Threading

Threading of Casing, Tubing and Rotary connections Re-cutting / repair of API Casing, Tubing and Rotary connections Repair and refurbishment of Premium threaded tubulars under licence

from the OEM provider once the shop is operational and accredited toISO

Tungsten Redress

Tungsten Redress of drilling and fishing tools such as stabilizers, millsand tungsten dresses equipment.

General Machining & Repairs

Machining and Welding Services including refurbishment of well heads,pressure control equipment, valves and manifolds

Hardbanding Services

Licensed Applicators of most Proprietary Wires including Arnco 100;300 & 350XT Duraband NC Certified Applicator ULTRABAND NM Specialized in In-Field Repair of the 18 Box Taper


9/33

Page 8 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Rental Tools and Equipment

Rentals to the operating companies, drilling contractor and service companies ofdrill strings and BHA components, work strings, specialised drilling tools andequipment including drilling jars, shock tools, stabilizers and pressure controlequipment etc. either through a direct investment or via an association withthird parties when deemed appropriate.

NDT Training

Eurotechnology is a leading provider of applied inspection technologies trainingprogrammes and certification for both internal operations as well as third partyclients personnel for the following disciplines.

From its roots in the North Sea, Eurotechnology & NDT Eagle has been supplyingNDT training to the different industries which use NDT Inspection processes.

Approved Inspection / NDT Training & Personnel Certification (Note1) Advanced NDT Techniques (EMI; UT; ET ; F.L.U.T.) NDT Methods (MT ; PT ; UT ; VT; RI ; RT) Weld Inspection Processes (3.0; 3.1; 3.2)

ASNT / PCN Level III Consultant

In addition to training Eurotechnologys personnel it is anticipated that the NDTinspection training business will be expanded into the various customers thatcarry out in-house inspection processes in both the oil and gas operating sectorsincluding the industrial plants and refineries that should have a largerequirement for various NDT disciplines.

Note 1Inspection TerminologyEMI: Electromagnetic Inspection technologiesF.L.U.T: Full Length Ultrasonic TestingET: Eddy Current TestingUT: Ultrasonic TestingMT: Magnetic Particle TestingPT: Liquid Penetrant TestingVT: Visual Thread InspectionRT: Radiographic Testing

RI: Radiographic Interpretation


10/33

Page 9 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





NDT Level III Service

The Level III inspector qualification for the NDT industry is best in class andwhen combined with experience gained from various projects and disciplines theLevel III inspector becomes indispensable to establishing and supporting asuccessful inspection, machining and related operation.

In addition to providing the technical support based on qualification andexperience, the Level III inspector in a field operation will arrange the differentNDT training, examination and certification of the NDT related inspectors.

EUROTECHNOLOGY GROUP offers NDT Level III services that include:

Personnel qualification services, procedure development and review,third party overview, witness and problem resolution.

Personnel qualification services include documentation review, trainingand qualification examinations.

Documentation review and examinations are performed to assureeducation, training, experience and qualification examinations meetthe appropriate code, specification and client requirements.

Eurotechnologys Level III engineer is certified to:

TV Nord CERT Germany Magnetic Particle Testing (MT) Level III Liquid Penetrant testing (PT) Level III Visual Testing (VT) Level III Ultrasonic Testing (UT) Level III Electro Magnetic Testing (ET) Level III Radiographic Testing (RT) Level III

CSWIP Rotary Tool Supervisor Level III

Drillstem Senior Inspector Level III DGZfP: NDT Master


11/33

Page 10 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Engineering& Technical Support

While the NDT Level III inspector is the technical resource for the inspection andrelated services it takes a totally different discipline to support the machine shopand related services as indicated below.

To ensure adherence to the clients requirements, the different specifications andOEM certification criteria, it is very important that the machine shop and otherservices are technically lead through an experience engineering function that hasexternal support to ensure that operation stays abreast with the latest in

technology and accreditation and the customer has someone to technicallyinterface with.

The Engineering department would offer a full design service in-house fromconcept to completion backed up with a fully documented design package tomeet API or relevant customer standards.

The local engineering group would offer 2-D design solutions in the form ofAutoCAD from conceptual layouts to detailed machining drawings, giving thecustomer the opportunity to visualize the solution to their problem prior tomanufacture.

Services offered by the Engineering GROUP Engineering Department would inorder to support the machine shop and related operations include:

Operations Engineering Support Machine Shop Engineering Support Field Support & Design Engineering Project Coordination Material Selection Equipment Modifications & Repair Special Orders/One-offs

Design Drafting Conceptual Layouts Detailed Manufacturing Drawings Design Testing & Verification Research & Analysis (performance & failure) Cost Implication Assessment Technical Support (API, DS1 & ISO) as well as the OEMs for

accreditation


12/33

Page 11 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Inspection Services

The Eurotechnology Group is the Oil and Gas Industrys leading independentsupplier of advanced inspection technologies

The fixed head units supplied by the Eurotechnology Group are a combination ofEMI, full length ultrasonic inspection and end area ultrasonic inspection whichcan be supplied as a EMI unit, EMI with an ultrasonic end area inspection unit,Ultrasonic System or a combination of all

The fixed head unit can be configured to include:

External Cleaning of the pipe body Transverse and Three-dimensional Defect Detection Longitudinal / oblique Average wall loss via EMI Full length Wall thickness measurement via the Ultrasonic inspection process Grade comparison Ultrasonic End Area Inspection Typical Size Range: 2 3/8 to 13 3/8 OD

If the EMI unit does not include ultrasonic inspection and wall thickness in theoriginal build, the unit can be built with a provision to retrofit this at a later date.

Whatever configuration is provided it would be beneficial to include an allowanceto incorporate the end area ultrasonic inspection for DS1 category 5.

The fixed head units strength is the high rate of through put and additionalinspection capabilities it offers vs. portable type equipment current being offeredfor the most part.

Most inspection is charged to the client on a per joint basis and when set up

correctly with the personnel to finish the tools joint and connections, the fixedhead unit will be able to complete on average up to four times the inspectionverses using the buggy type system which is very much more manual and lesseffective process limited to only transverse and wall loss inspection.

The fixed head unit with a combination of EMI and Ultrasonic inspections thatoffers something that differentiates the inspection service offering well inadvance of what is currently offered via local inspection companies.


13/33

Page 12 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





End area finishing, noteenclosed inspection cabins

Full Length EMI inspection Unit withUltrasonic end area and external cleaning


14/33

Page 13 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





ExExamples of the interior of the Inspectors Control Cabin. The control Cabinconfiguration is dependent on Model and Inspection capabilities selected


15/33

Page 14 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Portable Drill Pipe Inspection Systems

EUROTECHNOLOGY GROUP employs the latest state of the art real timecomputerised inspection system to inspect the tube of used drill pipe and tubingat field locations.

The Dual Function unit is Advanced Real Time Inspection System based around aportable buggy type system that includes not only transverseand three

dimensionalinspections but full length average wall loss.

Supporting the inspection of the drill pipe are inspection equipment for thebottom hole assembly (BHA) as well as Refacing equipment (sandpaper type) topolish the rotary connection face should minor imperfections be present.


16/33

Page 15 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Inspection of BHA's, Fishing Equipment and other Rotary

Equipment

In additional to the various tubulartypes, the client will require a fullrange of inspection services for theirBottom Hole Assemblies (BHA) andother tools and equipment

The Eurotechnology BHA inspection kitis designed accompany the fixed headunits, the field type drill pipe unit aswell being used for the variousmiscellanies inspection requirement.

The BHA inspection kit has thecapability to inspect all the differenttypes of rotary and handling equipmentincluding non-magnetic tools and

equipment:

MPI inspection of threads, end areas and bodies. Visual and Full dimensional checks Dye Penetrant Testing

Accompanying Services also include

Ultrasonic Testing

Hardness Testing Pipe straightening


17/33

Page 16 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Rig Inspection

The Eurotechnology Group offers a full rig site inspection service including thefollowing items:

Drilling/Work-over rig masts, crown block and substructure Lifting equipment i.e. slings, wire ropes, cranes, forklifts, hooks, baskets,

containers, shackles, pad-eyes handling equipment Elevators, Rig tongs Wellhead running tools Hooks, travelling blocks etc.

Dead line tie downs, raising line pad-eyes, sockets, rings Mud pumps pistons, modules, valve cups, manifolds All lines carrying pressure

Rig site inspection services include magnetic particle, liquid penetrant, visual,mechanical measurements, ultrasonic inspection methods and hydrostatictesting.


18/33

Page 17 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Machine Shop & Related Services

When establishing a oilfield machine shop it has to be considered as to whatservices the machine shop will provide to the end user as each facet of theservice will require specialist personnel and equipment

Repair of Tubulars

The EUROTECHNOLOGY GROUP machine shop management system is designedto operate in accordance to ISO 9001-2008, ISO 1400: 2004 and BS OHSAS18001: 2007 along with the appropriate API standards 5CT, 6A, 7 and 16A forexample for the machining and re-cutting API rotary, casing and tubingconnections and the various drilling equipment.

In addition to the API rotary connections, the machine shop will be designedwith accreditation to the tubular manufacturerspropriety connections in mind.

Refurbishment of Rotary Tools

The machine shop would have the capability to strip down rotary equipmentsuch as drilling jars, shock tools and downhole motors, inspect and reassemblethe equipment

Local Manufacturing:

The move from providing machine shop services to establishing a selective local

manufacturing unit is a natural progression especially having the engineeringgroup already established

While additional machine tools will be required a start-up operation this wouldmost likely initially cover items such as those indicated below:

General and Precision Machining Works Coupling and Flow Coupling, per API Spec. 5CT Crossover Subs & Pup Joints, Lift Subs and Lift Plugs, Mills, Wash pipe

extensions, Overshots etc. Certified welding to API, DNV 2.7.1 and ANSI


19/33

Page 18 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Downhole Tools Pressure Control Equipment (DSA's etc.) Assorted Fishing Tools, Mills, Shoes etc. Gaskets, nuts and studs

Tubular Repair:

The innovated CNC In-situ Threading Lathes are recognised by the OCTGindustry as being the leading unit and while there are several size combinationsa typical unit would cover a size range from 2 3/8 to 20 OD tubulars.

The In-Situ Threading unit is designed for an operation that has a high throughput with typical cycle times indicated below

CONNECTIONTYPE

OUTSIDEDIAMETER

CONNECTIONCUTTING

CYCLE TIME

MACHINERPM

LOADLAZER TRU-UP/OFFLOADTIME (est)

API BUTTRESS 5-1/2(140mm)

60secs 500 rpm 45 secs.

API BUTTRESS 7(177.80mm)

90secs 390rpm 45 secs.

API BUTTRESS 9-5/8(244.50mm)


API BUTTRESS 13-3/8(339.70mm)


API BUTTRESS 18-5/8(473mm)


API BUTTRESS 20 (508mm) 400secs 130rpm 90 secs.

PREMIUM (typical) 5-1/2

(140mm)


PREMIUM (typical) 7(177.80mm)


PREMIUM (typical) 9-5/8(244.50mm)


PREMIUM (typical) 13-3/8(339.70mm)



20/33

Page 19 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Thread repairs or new cuts

Rotary & other API Connections: Lifting subs Crossover Subs Line Pipe Drill Pipes Drill Collars Tubing Casing

Stabilizers Mills and Other Drilling Tools and Equipment

Propriety Connections

The In-situ range of CNC threading equipment is approved by the major OEMtubular manufacturing for field applications

Typical Specification for a 20 Series 2000 Machine System.

Fanuc 32i-TB Series control mounted in a custom pendant.

Fanuc Screen display function with remote access for on-line diagnosticand operational support from In-Situ(if required).

1 off HMOP Fanuc handy panel. Custom designed Fanuc Picture screen for Operator assistance and

Diagnostic CE marked Rittal enclosure housing all control gear and associated

equipment. In-Situ Rotating head with CNC controlled X Axis movement to allow

turning operations on stationary pipe. Fanuc Alpha iI40/6000HV AC Spindle motor. Z Axis linear movement by four precision preloaded linear bearings.

Dual preloaded precision ballscrews on Z Axis. 1 SET Sandvik Capto toolholders . X axis Direct feedback via Renishaw Resolute scale (Closed Loop). Moog Rotary data communication for X Axis scale. Z axis Direct feedback via Heidenhain scale (Closed Loop). Programmable In-Situ Servo controlled 4 Jaw Chuck 22 through bore. Operating range 22"- 2 7/8" without Jaw change. Programmable 4 off High accuracy pipe alignment lasers integrated

with the Pendleslide pipe alignment system. Hydraulic power pack to suit.


21/33

Page 20 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Fully integrated high pressure (up to 70Bar) coolant system with paperband filter.

Through spindle coolant. Swarf conveyor. Completely enclosed machine guarding, operator sliding access door

with safety interlock system. 1 set of Fanuc Manuals, Installation layout, Maintenance, Parts and

operation manuals. 1 Set of Foundation Drawings and elevation details. Necessary outputs (Machine in cycle, Pipe Clamped/Unclamped,

Emergency stop) to interface with handling equipment.

The Eurotechnology advanced In-situ CNC threading lathe, containerised andready to operate


22/33

Page 21 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Breakout, Refurbish and Makeup Services

This service offers the end user a complete strip down, inspection, reassembleand test of downhole drilling equipment such as drilling and fishing jars,accelerators and shock tools. It also offers a completion makeup and testingservice to the operating company.


23/33

Page 22 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Refurbishment and Repair of Pressure Control and

related Equipment:

The company has the capabilities to bore and machine large parts with diameterup to 78 and depths up to 67 for:

Blow out Preventer (BOPs) with single ram and double rams. Rotary hose Body annular single and double.

Bonnet. Valve. Mud cross. Fluid ends. Drilling spool. Gate valve Manual / Hydraulic and check valve. Flange and adapter. Kill line and choke manifold. General and precision Machining Works


24/33

Page 23 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Sub Arc Welding

Cladding and rebuild of Pressure Control and related Equipment

Vertical and Horizontal Turning

Horizontal Boring

CNC Vertical Turning Lathe


25/33

Page 24 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Welding Services

The typical oilfield machine shop welding operations is designed to coverdifferent tools from the redress of Stabilizers and mills to the fabrication of itemssuch as baskets

Tungsten Redressing/Hard facing

The redressing and hard facing of drilling tools,and fishing tools is carried out using:

Tungsten carbide inserts. Trapezoidal shaped inserts. Tungsten carbide

Stabilizers redressing

EUROTECHNOLOGY GROUP provides its customerwith the technology advanced welding system forthe tungsten redress of stabilizers.

The tungsten redress process will extend the lifeof downhole tools, thereby reducing costs andimproving productivity


26/33

Page 25 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Grinding Services

After redressing of the various stabilizers and mills, they are then ground tomeet the nominal OD required by the end user

General Welding

The EUROTECHNOLOGY GROUP offers general welding and fabrication services

to its clients such as tanks, transport baskets and other general weldingrequirements


27/33

Page 26 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Stress Relieving / Post weld Heat Treatment:

To cope with thedifferent stress relievingand heat treatingoperations fromPressure ControlEquipment to RotaryTools, a significantcapability is required.

Eurotechnology offersan electric oven forHeat Treatment with avolume capacity of 9m3

and a heating capacityof 1200oC maximumtemperature. Lowercapacity ovens are alsoavailable.


28/33

Page 27 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Hardbanding Services

Eurotechnology offers the latest inHardbanding technologies utilizing thepropriety Eurotechnology Hardbandingsystems

EUROTECHNOLOGY GROUP is certifiedby the OEM to apply Arnco, Duraband

& ULTRABAND NM Hardbandingproducts.


29/33

Page 28 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Refurbishment of Handling Equipment and Manual Rig

Tongs

Load test for rig handling equipment can beperformed to pressures from 1.3 bar (2,5 Ton/in2) -276 bars (500 Ton/in2), SWL such tests arecarried out on:

Tongs (Hydraulic, Pneumatic or Manual) Elevator (Single joint, Slip, Collar or

Spider)

The testing operation is monitored through a CCTV and recorded digitally as wellas on a chart and provided to the end user along with a report on the workcarried out.


30/33

Page 29 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Shot/GRIT Blast Bay:

The Shot / GRIT Blast Unit comes with a complete re-cycling and filtrationsystem and is used to strip clean the drilling tools and handling equipment sothey can be reassembled and re-painted them as part of the overall check andtest operation.

The Blasting systems come in a pre-containerised version or with the equipmentready to install in a fixed structure

Spray Painting Area:

The spray paint area can either be a permanent installation or a containerisedversion equipped with an environmentally friendly paint booth to ensure that thetested, repaired and manufactured equipment is sent out in an as newcondition


31/33

Page 30 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Pressure Testing

EUROTECHNOLOGY GROUP provides a wide range ofpressure testing equipment for both a permanent orcontainerised installation.

The equipment is designed to perform high pressuretesting Hydraulic and Hydrostatic with pressures from2,000 Psi up to 20, 000 Psi.

Blow out Preventer (BOP) with single & double rams; Annular (BOP). Choke Manifold. Gate Valve, Check Valve, Valve inside BOP & Mud Cross. Kill Line, Choke Line, Lower Kelly and Upper Kelly; Completion assemblies

Typical Containerised System can be based on either an 20 or 40 footcontainer plus a smaller container for test panel and recording systems


32/33

Page 31 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496





Wire Rope Sling Testing

Several types of wire rope sling testers are available to meet the requirement ofthe local operating company and drilling contractor, examples are indicatedbelow:

100Tons, 10mBed

Digital monitor LEDreadout

113Tons, 9.14mBed

Desktop + Software

100Tons, 10mBed

Desktop + Software

100Tons, 10mBed

Desktop + Software


33/33

Page 32 of 32

P.O Box: 4275

Al Khobar 31952


Tel No. +9 66 3 5107172

Fax No. + 966 3 8938496



In Conclusion

The Eurotechnology Group is the forerunner in fieldtechnologies for inspection, machining and relatedoperations providing a one stop shop approach to the end-users.

One Company,

One Interface, Focused Service Delivery using latest technologies

Consolidated Oilfield inspection and machine shop

capability in a managed approach.

ETI the One Stop Service Center Overview

Documents