Page 1 Roll No. Former Designation Replaced by Title page price (Eth.Birr) Parameters to be Regulated ES A.A3 001:1990 Clause 5 ES A.A3.002:1990 Use of Si Units ES B.W1 001:1990 ES 261:2001 Drinking water-specification 7 6 Clause 4.1 - Physical requirement Clause 4.2.2 - Toxic Substance Clause 4.4 - Bacteriological level ES 597 :2001 ES 597 :2012 Bottled drinking water Specification 21 26 • 5.2.1 Physical Requirements • 5.2.2 Palatability • 5.2.3 Bacteriological • 5.2.4 Radioactivity • 5.3.1 Defect 3 ES S.J2. 002:1990 ES 120:2001 Industrial safety-eye protective device 14 12 Clause 3.1 Resistance to change in temperature Clause 3.2 - Uniformity and Grading 3 ES S.J2. 004:1990 ES 122:2001 Industrial safety-eye protector 6 3 Clause 5.1 - Finish Clause 5.2 - Material Clause 5.3 - Ventilation Clause 5.4 - Optical qualities of lenses List of Ethiopian Mandatory Standards 2 ICS 13.340.01 PROTECTIVE EQUIPMENT IN GENERAL ICS 01.060 QUANTITIES AND UNITS 1 ES ISO 1000:2001 SI Unit and recommendation for the use of their multiple & certain other units 24 29 ICS 13.060.20 DRINKING WATER
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES A.A3 001:1990 Clause 5
ES A.A3.002:1990 Use of Si Units
ES B.W1 001:1990 ES 261:2001 Drinking water-specification 7 6
• 1.5.2a Cap dimension in accordance to ES/IEC 60061-1 • 1.5.3 Lamp dimension in accordance with evant data sheet of G13 caps caped lamps • 1.5.4 Starting characteristics in accordance to relevant data sheet value of G13 caps caped lamps • 1.5.5a Initial reading of voltage at the lamp terminals • 1.5.5b Initial power dissipated by a lamp • 1.5.6a Initial reading of luminous flux • 1.5.7 Lumen maintenance of a lamp • 1.5.8a.b Marking all lamp arameters with G13 lamp caps operating with national voltage and & frequency range (230v/50Hz) under data sheet2.3
ES IEC 60086-1 Primary batteries Part 1: General 41 64 • 4.1.2 Battery dimensions in accordance with ES/IEC 60086-2 of clause7 • 4.16.1 Marking • 4.2.1 Discharge performance in accordance with ES/IEC 60086-2 • 5.2.2 Discharge service out put
Page 4
ES IEC 60227-1Polyvinyl chloride insulated cables of rated voltage up to and including 450/750v
24 29
• 5.1.3 Conductor’s construction in accordance with ES/IEC 60228 , · 5.1.4 Conductor’s electrical resistance in accordance with ES/IEC 60228 , • ,5.2.3 insulation thickness in accordance with particular specifications of ES/IEC 602273 and ES/IEC 60227-4 • 5.5.3 Sheath thickness in accordance with particular specifications of ES/IEC 60227-4 • 5.6.1 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v
ES IEC 60227-3Polyvinyl chloride sheathed insulated cables for fixed wiring of rated voltage up to and including 450/750v
23 26
• 2.3.1 , 3.3.1 , 4.3.1 , 5.3.1 , 6.3.1, 7.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228, • 2.3.2 , 3.3.2 , 4.3.2 , 5.3.2 , 6.3.2 , 7.3.2 Insulation thickness in accordance with table 1.column 3 • 2.4 ,3 .4 , 4.4 , 5.4 , 6.4 , 7.4 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v table 24,6,8,10,12
ES IEC 60227-4Polyvinyl chloride sheathed insulated cables for fixed wiring of rated voltage up to and including 450/750v
14 12
· 2.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 2.3.2 Insulation thickness in accordance with table 1.column3 • 2.3.5 Sheath thickness in accordance with particular specifications of table 1,column5 • 2.4 Voltage withstand of completed cable at 2000v and voltage withstand of cores at 1500v as per table 2
Page 5
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES IEC 60227-5Polyvinyl chloride flexible insulated cables for fixed wiring of rated voltage up to and including 450/750v
26 29
• 2.3.1 Conductor’s resistance maximum in accordance with table1,column 5 • 2.3.2 Insulation thickness in accordance with table 1.column 4 • 2.3.4 Overall dimension in accordance with table 1.column 2 and 3 • 5.3.4 Sheath thickness in accordance with table 7,column 3 • 5.4Voltage withstand test of completed cable at 2000v and voltage withstand of cores at 1500v as per table6,8,10,12,14
ES IEC 60227-6Polyvinyl chloride insulated lift cables and cables for flexible connections of rated voltage up to and including 450/750v
21 26
• 3.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 3.3.2 Insulation thickness in accordance with table 4.column 2 3.3.4 Sheath thickness in accordance with table 5, column 3 • 3.4 Voltage withstand of completed cable at 2000v for U0/U • Voltage withstand of completed cable at 2500v for u0/u 450/7500v • Voltage withstand of core at 1500v for U0/U 300/500v • Voltage withstand of core at 2500v for U0/U 450/700v as per table 6 and 11
Page 6
ES IEC 60227-7Polyvinyl chloride insulated Cables of rated Voltages up to and including 450/750 V - Part 7: Flexible Cables Screened and Unscreened with two or more Conductors
14 12
• 2.3.1 Conductor’s construction and conductor’s electrical resistance in accordance with ES/IEC 60228 , • 2.3.2 Insulation thickness in accordance with table 1 or 2.column 2 • 2.3.6 Sheath thickness in accordance with clause 2.3.6 • 2.4 Voltage withstand of completed cable at 2000v for U0/U 300/500v • Voltage withstand of completed cable at 2500v for U0/U 450/7500v • Voltage withstand of core at 1500v for U0/U 300/500v • Voltage withstand of core at 2500v for U0/U
ES IEC 60432-1 Incandescent lamps safety specifications 47 72
• 2.2.1 Mandatory markings • 2.3 Protection against accidental contact in screw lamp holders • 2.4.1 Lamp cup temperature rise • 2.5.2 Unused lamp resistance to torque • 2.10 Interchangeability
ES IEC 60598-1 Luminaries 193 214
• 4.1.2 Battery dimensions in accordance with ES/IEC 60086-2 of clause 7 • 4.16.1 Markings • 4.2.1 Discharge performance in accordance with ES/IEC 60086-2 • 5.2.2 Discharge service output
ES IEC 60968 Self-ballasted lamps for general lighting services 17 18
• 1 Marking • 5.1.5.3 Interchangeability • 6 Protection against electric shock • 8 Mechanical strength • 9 Cap temperature rise
Page 7
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES IEC 60969Self-ballasted lamps for general lighting services performance requirements
19 ES C.D4. 201:1990 ES 92: 2001 Matches - Specification 15 16Clause 4- Requirements Clause 5 - Labeling
20 ES D.E1. 001:1990 ES 184:2001 Laundry soap- Specification 6 3 Clause 5.8- Total fatty matter, free caustic alkali
ES D.E1. 016:1990 ES 185:2001 Carbonic soap- Specification 5 3Clause 4.8- Carbolic acid, free caustic alkali or free fatty acid content
ES D.E1. 010:1990 ES 186:2001 Toilet soap- Specification 5 3 Clause 4.8- Total fatty matter, free caustic alkali
ICS 71.100.30 MATCHES
ICS 67.200. 20 OIL SEEDS
ICS 67.220.20 EDIBLE SALT,FOOD ADDITVES
ICS 71.100.40 SURFACE ACTIVITY AGENT
17
Page 20
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES D.E1. 051:1990 ES 187:2012Synthetic laundry detergents powders for household use -Specification
22 26Clause 4.- Requirements Clause 5. - Packing and Marking
21 ES C.D7.001:1990/ES 89:2001ES C.D7.026:1990 /ES 90:2001
ES G.B4. 051:1990 ES 93:2001Steel wire-cold drawn mild steel wire for the manufacture of nails 3 2
Clause 5.3 - mechanical Property
ES G.B4 060 ES 94 :2012 Barbed wire- Galvanized mild steelClause 3 - Dimensions Clause 4.1.3 -Zinc Coat
ES G.B4. 100:1990 ES 95:2001 Nails-steel wire nails 10 7Clause 5.2 - Band of shank Clause 5.3 - Eccentricity
ES ISO 6935-1:2009 Steel for the reinforcement of concrete-part 1: Plain Bars 16 16
• Clause 5 1. Dimensions, masses and tolerance • Clause 6 2. Chemical composition (cast analysis from molten batch at the production site )3. Product analysis (from the batch) • Clause 7.14. Tensile properties. • Clause 7.25. Bending properties.• Clause 86. Designation (local manufacturers should adhere to the designation )• Clause 97. Marking ( local manufacturers should adhere to local marking scheme)
8 6
Clause 3 - Dimension Clause 4.1 - General Requirement Clause 4.2 - Zinc Coating Clause 4.3 - Mass
ES 3742:2012 Galvanized Steel Sheets (Plain and Corrugated) - Specification
ICS 77.140 IRON AND STEEL PRODUCTS
Page 21
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES ISO 6935-2:2009 Steel for the reinforcement of concrete-part 2: Ribbed Bars 26 29
· Clause 5 8. Dimension, mass and tolerance• Clause 79. Chemical composition (cast analysis from molten batch at the production site )10. Product analysis (from the batch ribbed bar)• Clause 8.111. Tensile properties.• Clause 8.212. Bending properties.• Clause 1013. Designation (local manufacturers should adhere to the designation )
ES ISO 9364:2011 Continuous hot-dip aluminum/zinc coatedsteel sheet of commercial, drawing and structural qualities
19 23 5.8 , 5, 4.1 and 5.3.1
22 ES D.H2.001:1990 ES 176:2006 Low density polyethyene film-general requirements 4 2
Clause 7.1 - Chemical requirements - Clause 7.2 Physical requirements
23ES 3605:2011
Specification for Corrugated fiber Board Boxes for Packaing Rose Flower
14 12From clause 4 to 11
24 ES C.D5. 003:1990 ES 166:2001 Hydrated lime-general requirements 3 2
Clause 7 -Quality - chemical requirements - Physical requirements
ICS 85.020. PAPER PRODUCTION PROCESSES
ICS 91.100 CONSTRUCTION MATERIALS
ICS 83.140.10 RUBBER & PIASTICS PRODUCTS
Page 22
Roll No. Former Designation Replaced by Title page price (Eth.Birr)
Parameters to be Regulated
ES C.D5. 002:1990 ES 167:2001 Quicklime-general requirements 3 2