34 More information online at bannerengineering.com Banner Legacy Products Established Sensing Solutions From Banner D11/D11E • Economical, high-performance plastic fiber optic sensors • Red, green, blue or white light sources • Immune to subtle signal variations such as web flutter M12 & S18 Laser Emitters • Rugged 12 mm diameter or 18 mm threaded barrel laser emitters • Low power Class 1 or Class 2 laser with visible red beam (670 nm) • M12 emitters: collimated, apertured beam 2 mm in diameter, divergence of less than 1 milliradian • Compatible with a variety of Banner modulated photoelectric receivers Q08 Q10 D11 ECONO-BEAM S12 Laser Emitters VALU-BEAM Q85 Analog OMNI-BEAM The following standard products are still available from Banner. Please go online to bannerengineering.com for full descriptions and technical references. Q08 • Specially designed EZ-BEAM ® style optics and electronics for reliable sensing without the need for adjustments • Opposed and diffuse sensing modes • Ultra thin: only 8 mm deep Q10/Q14 • Economical opposed mode dc sensors in 75 to 10 mm thick right-angle housings • Opposed and diffuse sensing modes • Hermetically sealed optics S12 • Opposed-mode sensor pairs in 12 mm barrel- style housings • Completely epoxy encapsulated for superior durability, even in harsh sensing environ- ments • Innovative dual-indicator system to take the guesswork out of monitoring sensor performance and to warn of marginal sensing conditions or output overload ECONO-BEAM ® • Specially designed EZ-BEAM ® style optics and electronics for reliable sensing without adjustments • Simple to install with no setup adjustments • ac and dc opposed, retroreflective, diffuse, divergent diffuse, convergent, and glass and plastic fiber optic models • 38 mm height VALU-BEAM ® • Economy, performance, and reliability in a rug- ged line of sensors with standard limit-switch mounting hole spacing • Wide choice of standard models for ac, dc or ac/dc operation • SM91EN/RN models: enhanced immunity to sunlight: SMA990 models: built-in 6-digit totalizing. SMI912 series: intrinsically safe sensors for use in hazardous locations Q85 • Economical, rugged sensors • Wiring chamber with dual conduit entrances • Opposed, polarized retroreflective and diffuse sensing modes, available with programmable output timer • Models available for dc, ac or ac/dc universal power Analog OMNI-BEAM ™ • Sensor heads for diffuse, convergent, and glass and plastic fiber optic modes • Analog power blocks can be set for 0 to 10V dc • Ideal for applications requiring a continuously variable control voltage that is either directly or inversely related to sensing response Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
34 More information online at bannerengineering.com
Banner Legacy Products
Established Sensing Solutions From Banner
D11/D11E• Economical, high-performance plastic
fiber optic sensors • Red, green, blue or white light sources• Immune to subtle signal variations such as
web flutter
M12 & S18 Laser Emitters• Rugged 12 mm diameter or 18 mm
threaded barrel laser emitters • Low power Class 1 or Class 2 laser with
2 mm in diameter, divergence of less than 1 milliradian
• Compatible with a variety of Banner modulated photoelectric receivers
Q08 Q10 D11
ECONO-BEAM S12 LaserEmitters
VALU-BEAM Q85 AnalogOMNI-BEAM
The following standard products are still available from Banner.Please go online to bannerengineering.com for full descriptions and technical references.
Q08• Specially designed EZ-BEAM® style optics
and electronics for reliable sensing without the need for adjustments
• Opposed and diffuse sensing modes • Ultra thin: only 8 mm deep
Q10/Q14• Economical opposed mode dc sensors
in 75 to 10 mm thick right-angle housings• Opposed and diffuse sensing modes • Hermetically sealed optics
S12• Opposed-mode sensor pairs in 12 mm barrel-
style housings • Completely epoxy encapsulated for superior
durability, even in harsh sensing environ-ments
• Innovative dual-indicator system to take the guesswork out of monitoring sensor performance and to warn of marginal sensing conditions or output overload
ECONO-BEAM®
• Specially designed EZ-BEAM® style optics and electronics for reliable sensing without adjustments
• Simple to install with no setup adjustments• ac and dc opposed, retroreflective, diffuse,
divergent diffuse, convergent, and glass and plastic fiber optic models
• 38 mm height
VALU-BEAM®
• Economy, performance, and reliability in a rug-ged line of sensors with standard limit-switch mounting hole spacing
• Wide choice of standard models for ac, dc or ac/dc operation
• SM91EN/RN models: enhanced immunity to sunlight: SMA990 models: built-in 6-digit totalizing. SMI912 series: intrinsically safe sensors for use in hazardous locations
Q85• Economical, rugged sensors • Wiring chamber with dual conduit
entrances • Opposed, polarized retroreflective and
diffuse sensing modes, available with programmable output timer
• Models available for dc, ac or ac/dc universal power
Analog OMNI-BEAM™
• Sensor heads for diffuse, convergent, and glass and plastic fiber optic modes
• Analog power blocks can be set for 0 to 10V dc• Ideal for applications requiring a continuously variable control voltage that is either directly or inversely related to sensing response
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
More information online at bannerengineering.com 35
Banner Legacy Products
Established Sensing Solutions From Banner
MAXI-AMP™
• CR, CM and CD series amplifier modules with or without output logic for use with specified remote photoelectric sensors
• Combines power supply, output circuitry and logic timing in CL series module for use with self-contained sensors
MICRO-AMP® andRemote Sensors• MA3, MA3-4, MA3AF and MA3P series
amplifier modules for use with specific remote photoelectric sensors
• MA4 series add-on logic modules for output timing or multiple-sensor logic functions in component systems
• Miniature and ultra-miniature remote sensors for use with Banner PICO-AMP™, MAXI-AMP™ or MICRO-AMP® component sensing systems
SM512• Rugged sensors in narrow 127 mm wide
housings • Easily stack for mounting in tight spaces • Opposed, non-polarized retroreflective,
diffuse, convergent and glass fiber optic modes
• DC operation only
Bus-compatible Sensors• Broad range of sensing and housing
choices • Solid-state outputs for connecting directly
to “smart” bus system network junctions• Compatible with DeviceNet™, SDS and ASI
Sonic OMNI-BEAM™ Sensors• 100 to 660 mm range modular ultrasonic
sensor, with 80 to 560 mm window • 10-element moving dot LED range
indicator to simplify setup and monitoring• Convenient modular ac, dc, discrete or
analog design
ULTRA-BEAM™ Sensors• Electrostatic ultrasonic sensor with
sensing range to 6 m • Range or NULL/SPAN adjustments on
top of sensor • Switched ac and dc electromechanical
or analog outputs
MAXI-BEAM®
• Modular design for easy exchange of all sensing components and logic
• Opposed, polarized and non-polarized retroreflective, diffuse, convergent, fixed-field, and glass and plastic fiber optic modes
• Interchangeable heads with 90˚ increment rotation
MULTI-BEAM®
• Industry’s most flexible modular sensor family with more than 5,000 custom configurations for ac or dc power
• Opposed, polarized and non-polarized retroreflective, convergent and glass fiber optic modes
PICO-AMP™
• Ideal for remote sensing in wafer handling, small-part sensing and pharmaceutical applications
• Three frequency selections to prevent multiple-sensor crosstalk
• Variety of sensing heads in opposed and diffuse mode
MAXI-BEAM MULTI-BEAM PICO-AMP
MAXI-AMP MICRO-AMP SM512
Bus Sensors SonicOMNI-BEAM
ULTRA-BEAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
36 More information online at bannerengineering.com
Banner Legacy Products
Established Sensing Solutions From Banner
BEAM-ARRAY™
• Multiplexed emitter-receiver arrays for use in hostile industrial environments
• Three outputs offered; logic level “trip” output, dc sourcing analog or serial RS-232 data stream
• Optional controllers offer expanded sensing response options and outputs with sensor separation up to 3 m
LS• Simple, economical, reliable light screen
senses small parts passing anywhere through the beams
• 3 ranges and resolutions • Fast 1 millisecond response; built-in
5 millisecond output pulse stretcher
BMLV• An ideal system for sensing or counting
large objects falling through a sensing area using a retroreflective target
• Minimum object size is 50 mm at 0.6 m from the sensor, and 125 mm at 21 m
• Light-operate or dark-operate output
R55 and R55 Expert™
• Reliable color-mark sensors for outstanding detection and resolution
• Choice of two lens positions• Expert™ model with easy push-button
TEACH-mode setup and remote programming
BEAM-ARRAY LS BMLV
R55
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com