1 Essence of TPM Fostering people leads to Good Manufacturing 16 March 2007 Seiichi Nakajima PM Award Assessor, Japan Institute of Plant Maintenance
1
Essence of TPM Fostering people leads to Good
Manufacturing
16 March 2007
Seiichi Nakajima
PM Award Assessor, Japan Institute of Plant Maintenance
Copyright 2007 JIPM-Solutions 2
1. Birth and Development of TPM
2. Status of TPM Global Development and Good Examples ① TPM of the 21st Century ② Development in Number of TPM Award winning Sites
③ WORLDWIDE TPM ④ Trends in TPM Activities in recent years ⑤ Effective Cases at
Awarded Businesses ⑥ Benefit of TPM ⑦ Why does TPM give Significant Results?
3. Behavioural Science – The Theoretical Background to TPM ① SELF-ACTUALIZING MANAGEMENT (A.H.Maslow), ② Theory X and Theory Y (Douglas
McGreger) ③ DIRECTIVE MANAGEMENT AND PARTICIPATIVE MANAGEMENT (Rensis
Likert), ④ New Management Pattern “Linking Pin Function” (Rensis Likert)
4. Essence of TPM
① The origin of TPM ② The aim of TPM ③ Definition & Basic Concepts of TPM ④ Points
in fostering autonomous staff with good morale and skills ⑤ Change Thinking and
Behaviour with TPM ⑥ Preventive Medicine in Facility=Preventive Maintenance ⑦ The
Preventive, Zero-Focused Mindset (PM) & Zero Defect (ZD) ⑧ The Basic Approach to Zero
Failure ⑨ The Principles Behind Zero Failure ⑩ Overview of the Figure-of-Eight Method
for Quality Maintenance ⑪ Step Implementation of the Active Contrivance to Zero Industrial
Accident ⑫ Essence of TPM
5. Aim to be VISIONARY COMPANY ① What is VISIONARY COMPANY ② GE Revolution by Jack Welch Jack ③ The Role of
Management (P.F.Drucker) ④ Using TPM to Make “5S Management" a Reality! ⑤ Case of
5S management satisfaction improvement with TPM ⑥ Aim to be VISIONARY COMPANY
Contents
Copyright 2007 JIPM-Solutions 3
1. Birth and Development of TPM
1950
1960
1970
1980
1990
2000
1951- PM (Preventive Maintenance) Introduced to Japan from the USA
1958- PM (Productive Maintenance) Commenced dissemination in Japan
1962-Commenced Small-group activities in
Japan (Such as QC Circle, and etc.) 1962- ZD (Zero Defects) Mr. Philip Crosby commenced activities
1960- Behavior Science (Thesis publication)
1965- Commenced Japanese-style ZD
1
●1971- Commenced Production
Division TPM in Japan
●1982- Commenced company-wide deployment of TPM in Japan
●1985- Commenced global deployment of TPM
●1991- Commenced Global TPM Award
2001- 21st century TPM Proposal (Part II/III)
Triggered by PM Award presented to Denso with TPM
Tonen introduced US-type PM
Mr. George Smith visited Japan for PM training
NEC commenced small-group ZD activities
Aisin Seiki won TPM Award for company-wide deployment
Commenced TPM training in Korea, Taiwan, Brazil, USA, and etc.
TPM awarded to overseas companies for the first time:
Belgium Volvo, Nachi-Singapore
Copyright 2007 JIPM-Solutions 4
at Tonen Corporation 1951
Copyright 2007 JIPM-Solutions 5
DENSO (Nihon Denso) wining PM Award 1971
(middle: Mr. Katsuo Aoki)
(from Nihon Denso 25-nenshi)
Copyright 2007 JIPM-Solutions 6
(From Aisin Seiki 20-year History)
1982 Aisin Seiki was Awarded the PM Award for
Company-wide Deployment
In the afternoon of the final day of screening, comprehensive questioning and review were carried out, and the Hibi Project Manager, representing the panel of judges, stated the following:
“Aisin Seiki truly implements TPM, a company-wide PM (CWPM), including R&D and administrative divisions, that are original, rare and characteristic, and not at all a copied version of other companies.
President Nakai winning PM Award (September, 1982)
Copyright 2007 JIPM-Solutions 7
TPM Consulting in Taiwan 1986
Seminar at China Productivity Center 1986 At China Productivity Center 1988
Copyright 2007 JIPM-Solutions 8
Ground-Breaking TPM
Creative TPM
2-1 TPM of the 21st Century (Level 1,2,3)
A Conceptual View of the TPM Levels
Copyright 2007 JIPM-Solutions 9
1 4
6
17 7
5
62
4
9
1
9
7
6
10
6
15
1
20
31
7
22
8
32
1
10
25
43
15
1
45
5
6
9
1
61
13
16
62
19
4
17
3
87
22
6
16
2
56
27
8
22
3
83
33
11
22
1
95
27
51
25
2
104
28
12
1
17
6
108
42
12
16
1
88
52
17
21
22
1
87
34
15
1
3
16
4
90
47
18
11
7
2
99
40
17
22
0
20
40
60
80
100
120
140
160
180
200
1971 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 2000 2001 2002 2003 2004 2005
3 2 6 3 2 7 5 2 2 1
10 8 12 8 14
22 29
41 42
185 177
2
0 1
5 6
14 9
22
83
163
83
16
177
96
51
135
152 151
172
79
62
64
91 109
2005 2000 1995 1990 1985 1980 1975
168
15
30
45
60
75
90
105
120
114
54
41
overseas
2-2 Development in Number of TPM Award winning Sites
Award for World-class TPM Achievement
Advanced Special Award for TPM Achievement
Special Award for TPM Achievement
Award for Excellence in Consistent TPM Commitment, 1st Category
Award for TPM Excellence, 1st Category
Award for Excellence in Consistent TPM Commitment, 2nd Category
Award for TPM Excellence, 2nd Category
Trend in number of Award winning sites outside Japan
(Average for 1971-1980 - 3.2) (Average for 1981-1990 – 18.6)
16
(Average for 1991-2002 - 118.4)
Copyright 2007 JIPM-Solutions 10
2.③ 2-3 Worldwide TPM
Copyright 2007 JIPM-Solutions 11
2-4 Trends in TPM Activities in Recent Years 1. General Trend
1) The number of overseas award winners have increased to double of that of Japan. 2) There is an increasing trend of companies mounting challenges for higher-level awards (Part
II/III). 3) Trend of past award winners re-implementing the project.
2. Distinctive TPM Activities 1) Cases of TPM deployment via autonomous management systems…Mini-company
management systems, store management systems 2) Cases of Innovative/Original (Part II/III) TPM activities
Development of new products and new production methods aiming for the No.1 position in industry and the No.1 position in the world, Structuring of the mother factory
3) Kobetu-Kaizen…Dissemination of “innovative COS reduction” (Koichi Nakazato), PM analysis/Analysis on why/IE method utilization
4) Jishu-Hozen…Original new step deployed in Part II/III (quality maintenance, plant maintenance, operation management, and etc.)
5) Keikau-Hozen…CBM (Predictive maintenance)/Dissemination of RCM, efficacy for shut down, zero malfunction line structure
6) Quality-Hozen…Dissemination of “8-character deployment” (Yoshifumi Kimura), partial introduction of “Double 8-character deployment,” zero defect line structure, quality engineering, utilization of Six Sigma
7) Early Management…Establish DR (Design Review), concurrent development of products and equipment, achievement of vertical start-up, in-house development of a compact injection molding machine
8) Training & Education…Introduction of the CUDBAS method (Curriculum Developing Based on Ability Structure), nurturing operation engineers, certified equipment maintenance engineers and autonomous maintenance engineers
9) TPM in Administrative and Support Dept. …Computerization of production management systems, introduction of TPS (JIT), introduction of SCM activities, reduction in purchasing, distribution and inventory loss, shorten period for monthly closing (to 1-2 days)
10) SHE…Introduction of step deployment active contrivance to zero industrial accidents, zero accident line structure, recycling of industrial waste
Copyright 2007 JIPM-Solutions 12
2-5 Effective Cases at Awarded Businesses (FY 2006/Domestic)
1. Management Index Recurring income 28.6-fold (’02: \8 million’05: \229 million): Sambo Copper Alloy (Cont. 1) Net income on sales 3-fold: Konica Minolta Supplies Manufacturing Kansai (Category 1) Factory income 2-fold: Toppan Saga Yoki (Special)
2. Productivity (P) Productivity 1.7-fold: Konica Minolta Supplies Manufacturing Kansai (Category 1) Overall equipment efficiency 93%: Toppan Saga Yoki (Special), 92%: TOTO Nakatsu (Special), 85%: JIDECO Niigata (Category 1) Malfunction case/0 per month/262 cases: Shikishima Baking Pasco, Tokyo Tama (1) 3/123 cases: Toppan Saga Yoki (Special) 15/175 cases: Sambo Copper Alloy (Cont. 1)
3. Quality (Q) Zero defect delivery: JIDECO Kikukawa (Category 1), Carry-in zero defect case: Mitsuba Akagi (Cont. 1) Zero claim cases: TOTO Nakatsu (Special)
4. Cost (C) Production cost 1/5: Hamada Kogyo Silicon Wafer Operation (1) Chip production COS approx. 1/2: Sharp LSI Operation HQ Fukuyama No.3 Factory (Category 1)
5. Delivery (D) Delivery date observance100%: Mitsuba Akagi (Cont. 1), Delivery date observance 100%: JIDECO Kikukawa (Category 1) Production Lead time 1/2: Kanbe Toppan (Cont. 1), In-process inventory 1/4.5: Toppan Saga Yoki (Special)
6. Safety/Health/Environment (S) Zero accident requiring absence continued for 8 years: Gosho Works Miharu (Category 1) Zero labor accident: Konica Minolta Supplies Manufacturing Kansai (Category 1), JIDECO Niigata (Category 1) JIDECO Fukushima (Category 1), Showa Denko Shiojiri (Category 1), Showa Denko Tokuyama (Category 1), Suntory Yamasaki (Category 1), Technohama (Cont. 2) Recycling rate100%: Calbee Hokubu Company (Special)
7. Moral (M) Improvement proposal cases 7.9/mo./person: Technohama (Cont. 2), 5.2 case/mo./person: Sanwa Aluteck (Category 2) Certified Jishu Hozen Engineer accumulated total 116 persons (Passing rate for our company 90%, National average 60%): Sendai Nikon (Special)
Copyright 2007 JIPM-Solutions 13
2-6 Benefits of TPM
Automobile
Components
Semi-
conductors
Chemicals
Plastic
Products
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Average Cost-Benefit of TPM by Industry
Units ¥100M
Amount saved through TPM
Amount invested in TPM
Copyright 2007 JIPM-Solutions 14
SEIICHI NAKAJIMA 2-7 Why does TPM give Significant Results?
TPM is being deployed globally, reaching beyond differences in race, manners, custom, culture, and etc.
All companies introducing TPM have achieved wonderful
results.
“The making of a product” is “the making of people” Manufacture well-selling products Innovate manufacturing facilities, technology and
systems are all achieved by “autonomous individuals with good morale and skills”
It is certain that this is based on the principle common to
human beings, in other words, on “behavioral science,” research on “why people work”
Charging self-implementation requirement/ Total-worker-participation type management (=TPM)
Copyright 2007 JIPM-Solutions 15
Human behavioural factors – A H Maslow’s
5-stage hierarchy of human needs
•Work is a type of psychological therapy
for satisfying our desire for self-
actualization.
• People and work are in a cyclic
relationship; people grow and develop
through their work, bringing prosperity
to their companies, and that prosperity
lead s to further individual development.
• When people find a purpose in life
through their work, they become ever
more passionate about it.
The Theoretical Background to Team Activities (QC
Circles, ZD Groups, Jishu Kanri, etc.)
Behavioural Science – The Theoretical Background to TPM
3-1 SELF-ACTUALIZING MANAGEMENT
Safety needs (job and income security)
Self-fulfillment needs
(using one’s talent)
Social needs (a sense of belonging)
Ego or esteem needs (self-respect)
Physiological needs (sleep, food, etc.) (Based on AH Maslow’s writings on self-actualizing
management)
Copyright 2007 JIPM-Solutions 16
① The expenditure of physical and mental effort in
work is as natural as play or rest, and the average
human being does not inherently dislike work.
② Man will exercise self-direction and self-control in
the service of objectives to which he is committed.
③ The most significant rewards, e.g. the satisfaction
of ego and self-actualization needs, can be direct
products of efforts directed toward organizational
objectives.
④ The average human being learns, under proper
conditions, not only to accept but to seek
responsibility.
⑤ The capacity to exercise a relatively high degree
of imagination, ingenuity and creativity in the
solution of organizational problems is widely, not
narrowly, distributed in the population.
⑥ Under the conditions of modern industrial life, the
intellectual potentialities of the average human being
are only partially utilized.
Theory X Theory Y (The traditional view of direction and and control) (The integration of individual and organizational goals)
① The average human being has an inherent
dislike of work and will avoid it if he can.
② Because of this human characteristic of dislike of
work, most people must be coerced, controlled,
directed, and threatened with punishment to get
them to put forth adequate effort toward the
achievement of organizational objectives.
③ The average human being prefers to be directed,
wishes to avoid responsibility, has relatively little
ambition, and wants security above all.
(from The Human Side of Enterprise, by Douglas
McGregor)
3-2 Theory X and Theory Y
(The Theory X culture must be
changed to a Theory Y culture)
Self-Actualizing Management =Theory Y
Copyright 2007 JIPM-Solutions 17
=
(Based on Rensis Likert’s writings on behavioural science in management)
3-3 DIRECTIVE MANAGEMENT AND PARTICIPATIVE MANAGEMENT
Type of
Management Features Results
Directive
(Theory X)
Management by direction and control
(obedience based on fear)
High short-term
productivity
Lack of trust
Low long-term
productivity
Participative
(Team-Based
Activities)
Self-actualizing
management
(Theory Y)
Management by self-determination and
self-control
1 The principle of supportive relationships
2 Group decision-making and problem-solving
3 Setting stretching targets
High level of
trust
High long-term
productivity
<Participative Management = Self-Actualizing Management = Theory Y>
Copyright 2007 JIPM-Solutions 18
TPM
SEIICHI NAKAJIMA
(New Patterns of Management by Rensis Likert, 1964)
Linking Pin Function
3-4 New Management Pattern “Linking Pin Function”
Factory General Manger
Department Manger
Area Manger
Line Manger
Team Leaders
General Employees
Factory TPM Steering Committee
Department TPM Meetings
Area TPM Meetings
Shop-Floor Teams (PM Circles)
Copyright 2007 JIPM-Solutions 19
TPM Behavioral Science
PM PM (Preventive Maintenance)
(Productive Maintenance) ・Prevention
・Zero Breakdown ・Productivity
・Cost Down
ZD (Zero Defect)
Do it right the first time ・QC Circle etc.
・Eupsychian Management by A.H. Maslow
・The Human Side of Enterprise by Douglas McGregor
・New Patterns of Management by Rensis Likert
etc.
SEIICHI NAKAJIMA
Small Group Activity
4-1 The Origin of TPM
Copyright 2007 JIPM-Solutions
4-2 The Aim of TPM
Improve the company by improving its people and its equipment
+
Improve The Company
---- Develop people with the skills required for
today’s highly-automated factories----
1. Operators: Do Jishu-Hozen (AM)
2. Maintenance staff: Do advanced, specialised maintenance
3. Production engineers: Plan maintenance-free equipment
Improving the
People
1) Raise OEEs by improving the equipment currently in use
2) Design new equipment for minimum life-cycle cost and
vertical startup
Improving the
Equipment
Copyright 2007 JIPM-Solutions 21
SEIICHI NAKAJIMA 4-3 Definition & Basic Concepts of TPM
Definition of Company-wide TPM Basic Concepts of TPM
2. Preventive philosophy (preventive action) MP-PM-CM
3. Participation of all members (Management participation/Respecting people) Overlapping small
group, Jishu Hozen by operators
4. Principle of actual scene and actual thing “What should be” for
facilities and work, visual management, clean workplaces
5. Renewing common sense Continued evolution and
growth of views and thinking
1. Create a profit-making corporate culture Pursuit of economy,
zero accidents, zero defects, zero failures
1. Aiming to create corporate culture that optimizes
efficiency of production systems (Overall
effectiveness),
2. Structure with an actual scene/actual thing a
system that takes preventive action against loss
such as “Zero accidents, zero defects, zero
failures” targeting the overall lifecycle of the
production system,
3. In all divisions including production, development
Sales and administration divisions,
4. Participation of by all members of the company, from top management to frontline staff,
5. Achieve zero loss with overlapping small-group activities.
Copyright 2007 JIPM-Solutions 22
SEIICHI NAKAJIMA 4-4 Points in fostering autonomous staff with good morale and skills
Good morale
Good skill
Good workplace
…
Enhance problem-finding, improvement,
problem-solving capacities with training
programs and OJT experience,
Acquiring official certification
Continue TPM (self-fulfilling
management/Participating management)
TPM as a routine of corporate culture
Sense of achievement with self-direction and
self-control,
Successful experience, satisfy self-fulfillment
…
…
Copyright 2007 JIPM-Solutions 23
SEIICHI NAKAJIMA 4-5 Change Thinking and Behaviour with TPM
1. Policy and Target: - In line with the policies and targets of the superior, members of each corporate strata establish high targets, and self-controlled activities to achieve targets (self-directing/self-control)
2. Jishu-Hozen (Autonomous Maintenance): - Protect your own facility (self-control/participating management)
1) Voluntarily take action without being instructed by superiors such as with tag attachment and detachment at malfunction area, measures for sources of problems and hard-to handle areas, visual control, KAIZEN with Jishu-Hozen work time reduction.
2) Determine and implement standards such as tentative Jishu-Hozen standards and create autonomous inspection check sheets.
3) Attend inspection skill training and enhance equipment knowledge, and perform general inspections to extract and restore minor equipment defects.
4) Record malfunctions, minor stoppages, setup times and display target values and performances on the activities board.
5) Create ONE/POINT/LESSON and share information and improve skills. 6) Hold meetings with members of the circle and execute role sharing and measure proposals. 7) Superiors will execute step examinations for each step, and staff members will have a sense of
achievement and satisfaction from self-determination.
3. Kaizen: - Establish targets for the elimination of losses by each corporate strata, and derive a sense of achievement through improvement activities.
4. Training&Education: - Prepare training rooms, learning and practice tools, hold lectures and drills for maintenance and operation skill enhancement. Furthermore, participate in external training programs and encourage the targeting of official certification for HR development.
5. Improvement Case Presentation Sessions: - Internal and external presentation sessions will be a place for exchange and self-fulfillment.
6. Judgment/Recognition: - The best opportunity to satisfy self-fulfillment.
Copyright 2007 JIPM-Solutions 24
F-Tagging
Copyright 2007 JIPM-Solutions 25
Initial
Cleaning
and
Inspection
Copyright 2007 JIPM-Solutions 26
TPM Award Onsite Assessement
・Kubota Corporation Okajima Plant
・ADEKA Corporation (old Asahi Denka Co., Ltd)
Akashi Factory
Copyright 2007 JIPM-Solutions 27 日本の設備管理発展史日本の設備管理発展史
予防保全時代予防保全時代
1950年以前 1950年代 1960年代 1970年代 1980年代 1990年代
事後保全時代
専門保全部門による設備管理時代(PM)
総合的設備管理(TPM)時代生産保全時代生産保全時代 生産部門の生産部門のTPM時代TPM時代 全社的全社的TPM時代TPM時代 TPMのグロTPMのグローバル時代ーバル時代
日本の設備管理発展史日本の設備管理発展史
予防保全時代予防保全時代
1950年以前 1950年代 1960年代 1970年代 1980年代 1990年代
事後保全時代
専門保全部門による設備管理時代(PM)
総合的設備管理(TPM)時代
生産保全時代生産保全時代
生産部門の生産部門のTPM時代TPM時代
全社的全社的TPM時代TPM時代
TPMのグロTPMのグローバル時代ーバル時代
SEIICHI NAKAJIMA 4-6 Preventive Medicine in Facility=Preventive Maintenance
Preventive Medicine
Physical
Check up
Daily maintenance Cleaning, lubrication,
Tightening, check
Inspection
(Diagnosis)
Preventive repair
Preventive maintenance
Daily
Prevention
Early
Treatment
(Early exchange) ( )
Prevent
degradation
Measure
degradation
Recover
degradation ( ) ( ) ( )
Copyright 2007 JIPM-Solutions 28
4-7 The Preventive, Zero-Focused Mindset
Deterioration
Breakdown
= result
Pro
cess
Systems that do not allow breakdowns to happen
‘Deterioration Control’ e.g. Jishu-hozen systems, keikaku-hozen systems
Variation
Quality defects
= result
Pro
cess
Systems that do not allow quality defects to happen
‘Variation Control’
e.g. Hinshitsu hozen systems
Risks
Accidents =
result
Pro
cess
Systems that do not allow accidents to happen
‘Risk Control’ e.g. Safety systems
Latent demand and
dissatisfaction
Pro
cess
Systems for profitable business
‘Management of Latent Demand’ e.g. Sales proposal systems,
developmental sales systems
Working profitably = cause control + process control
(The philosophy of prevention – stop problems happening in the first place)
Causes
Causes
Causes
Causes
Sales = result
Copyright 2007 JIPM-Solutions 29
4-8 The Basic Approach to Zero Failure
Equipment does not go wrong by itself: people make it go wrong;
By changing the way people think and act, equipment can be made completely failure-free;
People must stop thinking about equipment as something that goes wrong, and start thinking about themselves as agents who can stop it from going wrong, and eventually get rid of failure for good.
Copyright 2007 JIPM-Solutions 30
4-9 The Principles Behind Zero Failure
Bring hidden equipment defects to light and nip them in the bud!
Breakdowns are only the tip of the iceberg
Hidden equipment defects
- Dust, dirt, contamination by
product or materials
- Wear, looseness, slackness, leaks
- Rust, deformation, scratches,
cracks
- Excess heat, excess vibration,
abnormal noise and other
abnormalities
Failure
( Preventing Breakdowns )
Copyright 2007 JIPM-Solutions 31
4-10 Overview of the Figure-of-Eight Method for Quality Maintenance
Sustain (Observe rules and procedures rigorously)
Improve (Tighten up existing rules and procedures,
and replace any missing ones)
Identify Existing
Situation
1-1 Investigate quality situation
1-2 Identify rules and procedures
1-3 Assess compliance
Restore
2-1 Restore
2-2 Check results
Analyse
Causes
3-1 Analyse causes 3-2 Revise standards
Eradicate
Causes Investigate causes Restore and improve Check results
Establish
Conditions
5-1 Revise QM Matrix
5-2 Revise standards
Maintain
Conditions
• Perform checks • Monitor trends (Revise the rules to ensure
they are observable)
Improve
Conditions
• Reduce number • Extend intervals • Reduce times (Make them easier
to observe)
1 2
3 4
5
6 7
CHECK
Copyright 2007 JIPM-Solutions 32
4-11 Step Implementation of the Active Contrivance to Zero Industrial Accident
Measures to solve problems at the source of danger factor
Step 1: Current situation survey
Step 2: Overall inspection of danger factors
Step 3: Create table of danger factors
Step 4: Improvement of danger factors
Step 5: Setup requirements for zero accident
Step 6: Create inspection standards, and
training and drills
Step 7: Execute safety diagnosis
Safety maintenance
Copyright 2007 JIPM-Solutions 33
SEIICHI NAKAJIMA 4-12 Essence of TPM
Foster autonomous
individual
with good morale
and skill
Preventive action/
measures for sources
of problems
Zero Loss
Good skill
Good morale
Good workplace
Zero
defect
Zero malfunction
Zero accident
Set up Hoshin Goal/ Evaluation of result
Kobetsu-Kaizen (Focused Improvement)
Jishu-Hozen (Autonomous Maintenance)
Keikaku-Hozen (Planned Maintenance)
Training & Education
Early Management (Product & Equipment)
Quality-Hozen (Quality Maintenance)
TPM in Administrative and Support Departments
Overlapping small-group organization
SHE (Safety, Health & Environment)
Th
e 8
Pil
lar
of
TP
M
Copyright 2007 JIPM-Solutions 34
SEIICHI NAKAJIMA 5-1 What is VISIONARY COMPANY
<Aim for VISIONARY COMPANY>
James C. Collins and Jelly I. Porras, professors at Stanford University, wrote in their book that Visionary Companies are “companies with vision, future-oriented companies, prospective companies, companies excelling in the industry, and that have won broad-based respect from other companies in the same industry, and continuously making a big impact on the world.”
A questionnaire survey of the CEO’s of 700 companies was carried out, and 18 companies were selected as target visionary companies for comparative examination.
3M, American Express, Boeing , Citicorp, Ford, GE, Hewlett-Packard, IBM, Johnson & Johnson, Marriott, Merck, Motorola, Nordstrom, P&G, Philip Morris, Sony, Wal-mart, Walt Disney.
The book also states that there are other visionary companies that were not included in the comparative examination, and that the above companies had fallen into management crises in the past, but had the power to regain their footing in spite of the adversity.
An important element of visionary companies is the fundamental principle; in other words, fundamental value and goal (the reason for the company’s existence) surpassing mere profit.
It states that the essence of visionary companies is that basic principles and the ambition for advancement are disseminated to the every corner of the company. (Cited Reference: BUILT TO LAST by James C. Collins & Jelly I. Porras Japanese version, Nikkei BP, Ed. 2006)
Copyright 2007 JIPM-Solutions 35
SEIICHI NAKAJIMA編集
[注:中嶋]
5-2 GE Revolution by Jack Welch
When Jack Welch assumed the role of Chairman and CEO of GE in April, 1981, the company was ranked No.10 in the US, with $25 billion in annual sales, $1.5 billion in profits, and an aggregated market value of $12 billion. By 1998, Welch had increased the business to $100.4 billion in annual sales (No.5 in the US), and $9.3 billion in profits. And the aggregated market value had exceeded $400 billion by the fall of 1999. This marks a 4-fold increase in sales, a 6-fold increase in profits and a 33-fold increase in the aggregated market value from 1981.
As soon as he was appointed CEO of GE, Welch had decided to create a completely new type of management style and declared that he would put a stop to the then current management style exercised routinely by most managers; a dominating and control type military system.
Welch was confident that his job was take action that would motivate his employees. The secret was to have the staff feel that they were given authority, in other words, to help the staff members perceive themselves as the “entrepreneurs.” How could he make his staff feel that they were a part of management? Welch had come up with the answer. It was a company-program where each staff member be his or her own boss named “workout.” (Self-fulfillment/Management participation)
Workout is a wide-scope system in which the bureaucracy is reduced and staff members are encouraged to openly and honestly express thoughts and understand one another. Welch strongly believed that staff members with the imagination and innovation to dramatically improve productivity were those who were actually working on the frontline.
(Cited reference: The GE WAY FIELDBOOK by Robert Slater, Japanese version, Nikkei BP, 2000.7.)
Copyright 2007 JIPM-Solutions 36
5-3 THE ROLE OF MANAGEMENT
There are three tasks that management has to perform to enable the
institution in its charge to function and to make its contribution:
① Establish the specific purpose and mission of the institution.
Management exists to fulfill the mission, i.e. the various purposes, of
their organization. (CS: Customer Satisfaction, SHS: Shareholder
Satisfaction)
② Make work productive and the worker effective. Institutions in
today’s society are increasingly the means through which individual
human beings find their livelihood, find their access to social status, to
community and to individual achievement and satisfaction. (ES:
Employee Satisfaction)
③ Manage social impacts and social responsibilities, and help to
address social issues. (SS: Social Satisfaction, GS: Global
Satisfaction)
(from P F Drucker’s Essential Writings on Management, adapted by S
Nakajima)
Copyright 2007 JIPM-Solutions 37
• CS (Customer Satisfaction): Satisfying QCD requirements
• ES (Employee Satisfaction): Fulfilling self-actualization needs
• SS (Social Satisfaction): Corporate social responsibility
• GS (Global Satisfaction): Conserving the global environment
• SHS (Shareholder Satisfaction): Securing profits and dividends
Maxim
um
Satis
factio
n
5-4 Using TPM to Make “5S Management" a Reality!
Copyright 2007 JIPM-Solutions 38
SEIICHI NAKAJIMA 5-5 Volvo Gent Factory (FY 1999 World Class Award)
By realizing an individual order production system, the company aimed for a significant reduction in lead time with 98% of deliveries with an average of 5 days. Furthermore, autonomous maintenance activities were expanded, cost control was tackled by all, including operators, and advanced simulation programs were utilized to deal with reduction in the trial production period. These measures had significantly improved the 5S’s: CS/ES/SS/GS/SHS (shareholder).
With the above measures conditions for prosperity as an car assembly factory were established.
- Five improvements in satisfaction with continued TPM -
<Case of 5S management satisfaction improvement with TPM>
Copyright 2007 JIPM-Solutions 39
SEIICHI NAKAJIMA 5-6 Aim to be VISIONARY COMPANY
Basis for “the making of a product” is “the making of people”
Top management itself should lead in making TPM (self-fulfillment/participating-type management) the common corporate culture, in fostering human resources and in aiming to become a VISIONARY COMPANY (No.1 in the industry, No.1 in the world)!
Copyright 2007 JIPM-Solutions 40
END
Thank you for your kind attention!!