A WORLD OF COMFORT Espar Idle Reduction Solutions Driving the Green Highway Idle Reduction Workshop & Exposition, November 1, 2013 Paula Bishop, Manager Transportation & Environmental Affairs John Bishop, Vice President Market Development
A WORLD OF COMFORT
Espar Idle Reduction Solutions
Driving the Green HighwayIdle Reduction Workshop & Exposition, November 1, 2013
Paula Bishop, Manager Transportation & Environmental AffairsJohn Bishop, Vice President Market Development
Espar Products, Inc.
Espar -- Heater Technology Recognized In the Truck Market
• Espar offers fuel-operated heaters for bunk heat and engine pre-heat for a wide variety of vehicles and equipment from automotive, trucks, buses, to large construction equipment and military equipment.
Use of ESPAR heaters allow drivers to stay warm and pre-heat the truck engine without prolonged engine idling. ESPAR heaters do not require any plug in.
• Espar sells to several OE truck manufacturers for installation on new vehicles
International Freightliner KenworthPeterbilt Volvo Western Star
• Espar sells aftermarket heaters for installation on almost any vehicle or equipment
Thermo King DealersOEM Truck Dealers
Master Sales Distributors
2013 / 2
Espar Products, Inc.
Espar – We Are the heat in Popular OE and Aftermarket Systems
2013 / 3
CleanPower
System
ParkSmart
Idle reduction
system
SmartAir
system
MaxxPoweranti idle
Espar Products, Inc.
Green, Innovative, & Quality--ESPAR!
•ESPAR heaters -- EPA verified idle reduction technology
•ESPAR heaters -- earned CARB approvalCalifornia Air Resources Board--industry standard for low emissions ULEVII
•Espar’s new controllers, Multi Max F-1000 & Digi Max D-1000 wererecognized as one of the top ten new products for 2012
•Espar received the 2013 General Motors Supplier Quality Excellence Award
2013 / 4
Espar Products, Inc.
What’s Wrong With Idling Trucks?
Fleet Expenses Related to Idling Vehicles*
Fuel Consumption• Diesel engines consume about one gallon of fuel per hour
Maintenance• Idling results in inefficient combustion, increasing soot-load downstream into after treatment
• After treatment plugs requiring regeneration, burning more fuel to clean DPF of soot load
• Increased regeneration decreases life of catalyst filters costing over $1,000 each
Durability –decreased life of these parts• Fan clutch, air compressor, belts, idler pulleys, alternator, water pump, turbo injectors, after
treatment exhaust system, air cleaners, and EGR valves
*Information from a major engine manufacturer
2013 / 5
Espar Products, Inc. 2013 / 6
Idling Calculator is available at
www.Espar.com
You Can Do the Math
Espar Products, Inc. 2013 / 7
Idle Reduction Saves Dollars—Sleeper Truck
Example:
– Diesel fuel costs $4 per gallon*– Idling consumes approximately one gallon per hour– Idling for 8 hours per night for heat while driver sleeps– Cost $32 per night to idle the truck (fuel only)– 120 average cold nights per year– $3,840 cost of fuel used to idle one truck per season
THE FIGURES MAY CHANGE But the message remains the same
IDLE REDUCTION SAVES BIG DOLLARS
*US national average diesel $3.87 on 10/28/13
A ‘Fuel Sipper’ – The Espar D2 Bunk heater on medium heat consumes 0.037 gallons per hour = $1.18 of fuel in 8 hours
Espar Products, Inc.
• Weighs only 7 pounds and is about the size of a loaf of bread
• Has four-speeds and air circulation mode for a wider range of operator comfort
• Up to 7,500 BTU of clean comfortable heat
• On medium setting uses only .04 gallon per hour and about as much voltage as a single marker light
• CARB Approval (D2, D4 & D5)
• Can be serviced without removal from the truck
• Built in safety features for worry-free operation
• Reduces the number of APU engine-on hours for cab heat
Espar -- Airtronic D2 Bunk Heater
Espar Products, Inc.
Heat Output 7,500 (2.2) BoostBTU/hr(kW) 6,150 (1.8) High
4,100 (1.2) Medium2,900 (0.85) Low
Fuel Diesel 1,2 o KeroseneConsumption 0.074 (0.28) Boostgal/hr (L/hr) 0.061 (0.23) High
0.037 (0.14) Medium0.026 (0.10) Low
Electric On start 8.3 ampsConsumption 2.8 amps (Boost)12V model shown 1.9 amps (High)12 or 24V available 1.0 amps (Medium)
0.67 amps (Low)
Air Throughput 48 cfm on Boost40 cfm on High27 cfm on Medium19 cfm on Low
Weight 5.9 lbs.. (2.7 kg)
Illustration of Espar’sAIRTRONIC bunk heater
Fuel metering pump
Combustion air blower
Glow pin
Integrated control unit
Combustion air
Exhaust outlet
Heat exchanger
Overheat sensor & Flame sensor
Hot air outlet
Combustion chamber
Air inlet
Fan
The 13,600 BTU Airtronic D4 is also available in truck kits for units domiciled in extreme weather areas.
SERVICE TIP: Readily accessible glow pin and screen allows servicing of the installed unit in the least amount of time. Modern design keeps maintenance costs to a minimum and allows servicing of many components without removal of the heater.
Espar -- Airtronic D2 Bunk Heater
Espar Products, Inc.
Espar’s four-speed heater provides a wider range of operator comfort and air circulation feature for those cooler nights. Provides comfort -- maintaining desired warmth, eliminating vibration and engine noise, plus improving air quality.
Espar – “First Class” in Cab Comfort
Espar Products, Inc.
State of the Art
Espar Airtronic Bunk Heater Controller
2013 / 11
• Manually control the operation of the heater – heating the cab to the desired temperature
• Buttons to select LVD (low voltage disconnect), run-time limiter, and preventative maintenance scheduler
• Diagnostic feature displays short description of fault code
• Display LCD screen, 2 LED indicators, and 3 buttons
• User-friendly operation with advanced features designed by listening to the ‘voice of the customer’
Espar Products, Inc.
• Internal circulating pump provides engine preheat throughout the engines cooling system
• No plug-ins required which provides for convenience and flexibility.
• Fast advance preheating in 1 to 2 hours -- complete engine warm up for instant vehicle use
• Immediate window defrosting and interior cab warmth
• Minimal power consumption which saves on batteries
• Compact and light weight, these systems are easy to install and won’t affect payload
• Excellent pre-heating capability for combinations of on-board oils or fluids.
Idling damages the engine from carbon
deposits on valves and pistons, degradation of
engine oil, and accumulation of water
and sulfur in the engine
Espar Heater Systems “First Class” in cab comfort
Espar – Hydronic 5 Coolant Heater
Espar Products, Inc.
Heat Output 17,100 (5.0) - HighBTU/hr (kW) 8,200 (2.4) - Low
Fuel Diesel 1, 2, keroseneConsumption 0.16 (0.62) - HighUS.gal/hr (l/hr) 0.08 (0.30) - Low
Electrical (12v) 4.4 amps - HighConsumption 1.9 amps - Low
Water 234 US gal/hrthroughput against 0.1 bar
(900 l/hr against 0.1 bar)
Weight 6.4 lbs.. (2.9 kg)
Fuel metering pump
Water Pump
Glow pinIntegrated control unit
Combustion air
Exhaust outlet
Heat exchanger
Overheat sensor
Water outlet
Combustion chamber
Flame sensor
Temperature sensor
Water inlet
Fuel inlet
Combustion blower
Espar Heater Systems “First Class” in cab comfort
Espar – Hydronic 5 Coolant Heater
Espar Products, Inc.
• Available for engine pre-heating - engine and fuel pre-heating or engine, bunk and fuel heating
• Up to 17,100 BTU of clean comfortable heat
• Uses as little as .08 gallon per hour
• CARB Approved
• Circulates coolant so the entire block is warmed
• Built in safety features for worry-free operation
• Available with state of the art proven Multi Max controllers -- the engine is at optimum operating temperature when the driver arrives
• Helps increase productivity and reduce system wear
Espar – Hydronic 5 Coolant Heater
Espar Products, Inc.
State of the Art
Espar Hydronic Controllers
2013 / 15
• Multi-Max F1000 is best suited to the needs of a fleet
• Both controllers able to program up to 4 events per day
• Both controllers include diagnostic codes
• Both controllers have programmable LVD, Runtime Limiter, and Preventative Maintenance Scheduler
• Fleet tested and proven technology withadvanced features designed by listening to the ‘voice of the customer’
• Multi-Max F2000 offers an LCD screen and more control for owners/operators
Espar Products, Inc. 2013 / 16
Service After The Sale!
Espar‘s THANK YOU for your business