® ® Engine Engine Model Caterpillar ® C15 ATAAC Net Flywheel Power 302 kW 404 hp Weights Operating Weight – 65 960 kg 145,430 lb Long Undercarriage • Reach Boom, R3.6 (11'10") stick, 1025 mm (40") Bucket, and 650 mm (26") shoes. Drive Maximum Travel Speed 4.1 kph 2.6 mph Maximum Drawbar Pull – 462 kN 103,767 lb Long Undercarriage 365C L Hydraulic Excavator
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
®®
EngineEngine Model Caterpillar® C15 ATAACNet Flywheel Power 302 kW 404 hp
WeightsOperating Weight – 65 960 kg 145,430 lbLong Undercarriage
• Reach Boom, R3.6 (11'10") stick, 1025 mm (40") Bucket,and 650 mm (26") shoes.
365C L Hydraulic ExcavatorHigh performance and rugged durability combine to maximize your productivity.
High level of sustained production,higher deep trenching and pipe-layingperformance, improved reliability anddurability increase your productivityand lower your operating costs.
Buckets
A variety of work tools, includingbuckets, couplers, hammers, and shearsare available through Cat Work Tools.pg. 12
Front Linkage
Caterpillar excavator booms and sticksare built for performance and longservice life. Two types of booms andsix lengths of sticks are available,offering a range of configurationssuitable for a wide variety of applications.All booms and sticks are stress relieved.pg. 11
✔
Operator Station
An all-new cab provides improvedvisibility and comfort. The new monitoris a full-color graphical display withenhanced functionality to provide simple,comprehensive machine interface. pg. 6
✔
Hydraulics
Proportional Priority PressureCompensated (PPPC) system withstate-of-the-art electronic controlensures hydraulic system efficiencyand excellent productivity. pg. 5
Engine
The Cat® C15 engine has state-of-the-artACERT® technology to meet U.S. EPATier 3 emission regulations, withexceptional performance capabilitiesand proven reliability. pg. 4
✔
✔ New Feature
3
Complete Customer Support
Your Cat dealer offers a wide rangeof services that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machineconfiguration to eventual replacement.pg. 14
Service and Maintenance
Fast, easy service has been designedin with extended service intervals,advanced filtration, convenient filteraccess and user-friendly electronicdiagnostics for increased productivityand reduced maintenance costs.pg. 13
Structures
Caterpillar design and manufacturingtechniques assure outstanding durabilityand service life from these importantcomponents. The 365CL uses thickerplates at the boom foot area to improverigidity. pg. 10
Undercarriage
Cat designed excavator undercarriageis stable, durable and low maintenance.The undercarriage is a long, variablegauge type for good machine stabilityand transportability. pg. 9
✔
Electronic Control System
Engine and machine Electronic ControlModules maximize fuel efficiency andperformance by maintaining the optimumbalance between engine speed andhydraulic demand. pg. 8
Diesel Engine. The Caterpillar C15,with ACERT technology, is a 15.2 liter,six-cylinder, 302 kW (404 hp) enginewith mechanically actuated electronicfuel injection (MEUI) and overheadcamshaft. ACERT technology providesoutstanding engine performance throughadvanced electronic control, precisionfuel delivery, and refined air management.
Fuel Consumption. The AdvancedDiesel Engine Management (A4)controller uses sensors throughout theengine to manage engine load andperformance. The A4 controller is themuscle behind engine responsiveness,self-diagnostics, controlling emissions,and fuel economy.
Fuel System. C15 engine uses amechanically actuated electricallycontrolled unit injection (MEUI) system.The MEUI system combines high-pressure injection and electronic controlin a single compact unit. The electronicunit injector is an integral part of theC15 fuel system. Computerized electroniccontrol provides precise metering andtiming of fuel injection.
Cooling System. High capacity,side-by-side cooling system allowsoperation in ambient temperatures up to52 degree C (126 degree F). The ElectricPower Control (EPC) controls the fanspeed based on coolant temperatureand hydraulic oil temperature foroptimized cooling.
Turbocharger. The C15 engine uses awater-cooled, center-section waste gatedturbocharger for improved performance.This turbocharger controls the air volumeto the cylinders and works efficientlyduring low and high load conditions.
Emissions. ACERT Technology is adifferentiated technology that reducesemissions at the point of combustion.The technology capitalizes on provenCaterpillar leadership in three coreengine systems: fuel, air and electronics.
Cold Weather Starting Kit. The kitconsists of two additional batteries,heavy-duty harness, large capacitystarting motor, and the ether startingaid. With this kit, the 365C has thecapability to start at –32 degree C(–25.6 degree F).
4
EngineA combination of innovations working at the point of combustion, ACERT technologyoptimizes engine performance while meeting EPA Tier 3 emission regulations.
• Cylinder speed is directly relatedto operator’s movement of joystickfrom feathering to full speed.
• Flow to cylinders duringmultifunctional operation isdirectly controlled by the operatorand is not dependent on loads.
• Controller reduces pump outputto minimum to save power whenjoysticks are in neutral position.
Main Pumps. Large, heavy-duty mainpumps and a separate swing pumpprovide quick cycle times duringmulti-function operation.
Reverse Swing Damping Valve.Swing dampening valves reduce swingwag and produce smooth swing stops.
Auxiliary Hydraulic Valve. The auxiliaryvalve is standard on the 365C L.The auxiliary valve is used with optionalcontrol arrangements to operate toolssuch as hammers and shears.
5
HydraulicsCat hydraulics deliver power and precise control to keep material moving.
6
Designed for simple, easy operation and comfort, the 365C L allows the operator to focuson production.
Operator Station
Cab Design. The workstation hasbeen designed to be spacious, quiet andcomfortable for the operator, assuringhigh productivity throughout the entireworkday. Switches are convenientlylocated for easy access. The new monitoris located to provide excellent visibilityand access.
Seat. The 365C L seat provides avariety of adjustments, includingfore/aft, height and weight to suit theoperator. Also included are adjustablearmrests and a retractable seat belt.For additional comfort, a new heatedair suspension seat is available as anattachment.
Hydraulic Activation Control Lever.The hydraulic activation controllever deactivates hydraulic functionsduring engine start-up, and preventsunintentional machine operation.
Climate Control. Positive filteredventilation with a pressurized cab comesstandard on the 365C L. Fresh air orre-circulated air can be selected witha switch on the left console.
Windows. To maximize visibility,all glass is affixed directly to the cabeliminating the use of window frames.The upper front windshield opens,closes and stores on the roof above theoperator with a one-touch action releasesystem. The lower front windshieldfeatures a rounded design to maximizedownward visibility and improveswiper coverage.
Wipers. Pillar-mounted parallelogramwiper, including a washer nozzle,increases the operator’s viewing area andoffers continuous and intermittent modes.
Skylight. An enlarged skylight withsunshade provides excellent visibilityand good ventilation.
Monitor. The compact, full-color,graphical display monitor is new withthe 365C L. The monitor has functionsto display machine, maintenance,diagnostic and prognostic information.The angle of the monitor can be adjustedto face the operator and prevent sun glare.
Consoles. Redesigned consoles featurea simple, functional design to reduceoperator fatigue, ease of switch operationand excellent visibility. Both consoleshave attached armrests and allow theheight of the armrests to be adjusted.
Cab Exterior. The exterior design usesthick steel tubing along the bottomperimeter of the cab, improving theresistance of fatigue and vibration.This design allows the FOGS to bebolted directly to the cab, at the factoryor as an attachment later, enabling themachine to meet specifications and jobsite requirements.
Cab Mounts. The cab shell is attachedto the frame with viscous rubber cabmounts, which dampen vibrationsand sound levels while enhancingoperator comfort.
Standard Cab Equipment. To enhanceoperator comfort and productivity,the 365C L cab includes a lighter,drink holder, coat hook, service meter,literature holder, magazine rack andstorage compartment. The cab alsocomes equipped with two, 12V-7 Ampelectrical sockets to provide additionalelectrical resources.
Machine Security. An optional MachineSecurity System (MSS) is availablefrom the factory on the 365C L.MSS uses a special Caterpillar keywith an embedded electronic chip forcontrolling unauthorized machineoperation.
Product Link. The 365C L is “ProductLink Ready” from the factory.
7
Monitor Display Screen. The monitoris a full color 400 � 234 pixels LiquidCrystal Display (LCD) graphic display.
The Master Caution Lamp the actionlamp blinks ON and OFF when one ofthe critical conditions below occurs:
• Engine oil pressure low
• Coolant temperature high
• Hydraulic oil temperature high
Under normal conditions or the defaultcondition, the monitor display screenis divided into four areas; clock andthrottle dial, gage, event display andmulti-information display.
Clock and Throttle Dial Display.The clock, throttle dial and gas-stationicon with green color are displayed inthis area.
Gage Display. Three analog gauges,fuel level, hydraulic oil temperatureand coolant temperature, are displayedin this area.
Event Display. Machine eventinformation is displayed in this areaalong with the icon and language.
Multi-information Display. This areais reserved for displaying informationthat is convenient for the operator.The “CAT” logo mark is displayed whenno information is available to display.
Operator Gain/Response. This is usedto suit the operators preference orapplication.
• Quicker, for fast response and moreproduction
• Slower, for more precision
• Three preset settings with 21 available
Pattern Control Changer. The standardhand control pattern changer can beaccessed through the monitor, to utilizeeither the standard excavator controlpattern (SAE) or Backhoe-loaderpattern (BHL).
Electronic Joysticks. Electronicjoysticks provide features not possiblewith hydraulic pilot valves:
• Eliminate pilot lines in cab forquieter operation
• Simple pattern change throughthe monitor
8
Electronic Control SystemManages the engine and hydraulics for maximum performance.
Undercarriage Components.Large, Caterpillar designed and builtundercarriage components offerheavy-duty performance and durability.
Sealed and Lubricated Rollers.Track rollers, carrier rollers and idlersare sealed and lubricated for excellentservice life.
Idler Guards and Track Guides.Idler guards and center track guides usedto maintain track alignment are standardon the 365C L. Optional two-piecefull-length track guiding guards areavailable for additional protection onsteep side slopes.
Track. The 365C L comes standard withthe new grease lubricated track calledGLT4. The track links are assembledand sealed with grease to decreaseinternal bushing wear, reduce travelnoise and extend service life loweringoperating costs.
Travel Motor. Two-speed axial pistonhydraulic motors provide the 365C Ldrive power and automatic speed selectionwhen the high-speed position is selected.This enables the machine to automaticallychange between computer-controlledhigh and low speeds depending ondrawbar-pull requirements.
Final Drives. The final drives are thethree-stage reduction planetary type.This design results in a completedrive/brake unit that is compact anddelivers excellent performance andreliability.
9
UndercarriageDurable undercarriage absorbs stresses and provides excellent stability.
Carbody Design. The advanced carbodydesign stands up to the toughestapplications.
• Modified X-shaped, box-sectioncarbody provides excellentresistance to torsional bending.
• Upper structure weight and stressesare distributed evenly across the fulllength of the track roller frame.
• Robot welding ensures consistent,high-quality welds throughout themanufacturing process.
Upper Frame. Rugged main frame isdesigned for maximum durability andefficient use of materials.
• Robot welding for consistent,high-quality welds.
• Outer frame utilizes curved siderails, which are die-formed, forexcellent uniformity and strengththroughout the length.
• Box section channels improveupper frame rigidity under the cab.
• Boom tower and one piece mainrails are constructed of solid,high-tensile strength steel plates.
• New boom foot design transfers loadmore efficiently with less stress incritical areas.
• Reinforced lift cylinder and swingdrive mounts increase structuredurability in rock and quarryapplications.
Cross-roller Bearing. The 365C Lswing bearing is a cross roller type,with 54 mm (2.13") diameter rollers.The cross rollers have a much greatercontact area than ball bearings,providing increased stability andlonger life.
Track Roller Frames. The track rollerframe is made of thick steel plate thatis bent into a U-shape and welded tothe bottom plate to create a box structure.The box structure design providesincreased rigidity and impact resistance.
Variable Gauge Undercarriage.The long variable gauge undercarriageis standard, providing a wide, stable basefor operating, or a narrow gauge forreduced shipping width. The track rollerframes are bolted to the carbody, andcan be placed in two positions.
10
StructuresThe 365C L structural components are the backbone of the machine’s durability.
Front Linkage Attachments. Select theright combination of front linkagewith your Cat dealer to ensure highproductivity from the very start ofyour job. Two types of booms andsix sticks are available, offering a rangeof configurations suitable for a widevariety of applications. The 365C Loffers a large combination of reach anddigging forces for optimum versatility.
Boom Construction. The 365C L boomshave large cross-sections and internalbaffle plates to provide long lifedurability. Castings and forgings areused in critical high-load areas suchas the boom nose, boom foot, andboom cylinder connection.
Reach Boom. The 7.8m (25ft 7in)Reach Boom (R), has been designedto balance the reach, digging force andbucket capacity required for a wide rangeof applications. Four reach sticks areavailable for use with the Reach boom.
Mass Excavation Boom. The MassExcavation Boom (M) 6.59m (21ft 7in)is designed to provide maximumproductivity. Two Mass sticks areavailable for high digging forcesand increased bucket capacity.
Stick Construction. The 365C L sticksare made of high-tensile strength steelusing a large box section design withinterior baffle plates and an additionalbottom guard to protect against damage.All sticks undergo a stress relievingprocess for greater durability.
Reach Sticks. Four lengths of reachsticks are available to suite a varietyof applications. Reach sticks use theVB-family bucket linkage and buckets.
Mass Sticks. Two mass excavationsticks are available for higher diggingforces and increased bucket capacity.Mass sticks use WB-family bucketlinkage and buckets.
Bucket Linkage. Two bucket linkages areavailable for the 365C L. Both linkagesare available with or without a liftingeye on the power link.
• The VB bucket linkage is for usewith the reach sticks and VB-familybuckets.
• The WB bucket linkage is for usewith the mass sticks and WB-familybuckets
Power Link. The new 365C L powerlink improves durability, increasesmachine-lifting capability in key liftingpositions, and is easier to use comparedto the previous lift bar design.
Linkage Pins. All pins used in 365C Lfront linkages have thick chrome plating,giving them high wear and corrosionresistance. The large diameter pinssmoothly distribute the shear and bendingloads to help ensure long pin, boom andstick life.
11
Front LinkageThe 365C L is designed for flexibility, high productivity, and efficiency in a varietyof applications.
Service and Performance. Caterpillarbuckets increase service life andoptimize performance.
• High strength and heat treated steelare located in high wear areas.
• Dual radius design for increasedheel clearance and reduced wear.
• VB-family buckets include a lift eye.
• A variety of exclusive hydraulicdedicated coupler buckets arealso available.
General Purpose (GP) and Excavation(E) Buckets. General Purpose (GP) andExcavation (E) buckets are for diggingin soft to hard ground with low tomoderate abrasive materials.
Heavy Duty (HD) and ExtremeExcavation (EX) Buckets. Heavy Dutybuckets are intended for use in moderatematerials like clay or dirt mixed withrock, and feature aggressive designfor moderately abrasive applications.Differences from GP buckets are:
• Thicker cutting edges, thickerbottom and side wear plates thatimprove performance in demandingapplications.
Heavy Duty Rock (HDR) and Rock (R)Buckets. Heavy Duty Rock (HDR)and Rock (R) buckets for diggingin fragmented rock, frozen ground,caliche and highly abrasive materials.Differences from HD buckets are:
• Additional, thicker wear platesextend beyond side plates forcorner and rear dent protectionand improved durability.
• Larger side plates provide additionaldent protection.
Ground Engaging Tools. CaterpillarGround Engaging Tools (GET) includea variety of side cutters, sidebarprotectors, and tip options to matchoperating conditions.
Work Tools. Choose from a variety ofwork tools such as hammers, shears,rotators, grapples or crushers. Ask yourCat dealer for information on attachmentsor special configurations.
12
BucketsExtensive selection of buckets helps optimize machine performance.
Service Intervals. Service intervals areextended to reduce maintenance costs.
• Engine oil, oil filter and fuel filtersat 500 hours
Oil Sample and Pressure Ports.Oil sample and pressure ports provideeasy checking of machine conditionand are standard on every machine.
Hydraulic Capsule Filters. The returnfilters or capsule filters for the hydraulicsystem are located beside the hydraulictank. The filter elements are removablewithout spilling hydraulic oil.
Service Points. Service points arecentrally located with easy accessto facilitate routine maintenance.
Pilot Hydraulic System Filter.Pilot hydraulic system filter keepscontaminants from the pilot system andis located in the pump compartment.
Remote Greasing Block. A concentratedremote greasing block on the boomdelivers grease to hard-to-reach locations.
Radial Seal Cleaner. Radial sealmain air cleaner with precleaner has adouble-layered filter element for moreefficient filtration. No tools are requiredto change the element.
Fuel-Water Separator. The waterseparator removes water from fuel,even when under pressure, and waterlevel can be monitored in the cab.
13
Service and MaintenanceFast, easy service has been designed in with extended service intervals, advanced filtration,convenient filter access and user-friendly electronic diagnostics for increased productivityand reduced maintenance costs.
Product Support. You will find nearlyall parts at our dealer parts counter.Cat dealers utilize a worldwide computernetwork to find in-stock parts to minimizemachine downtime. You can save moneywith Cat remanufactured components.
Machine Selection. Make detailedcomparisons of the machines youare considering before you buy.What are the job requirements, machineattachments and operating hours?What production is needed? Your Catdealer can provide recommendations.
Purchase. Look past initial price.Consider the financing options availableas well as day-to-day operating costs.This is also the time to look at dealerservices that can be included in thecost of the machine to yield lowerequipment owning and operating costsover the long run.
Customer Support Agreements.Cat dealers offer a variety of productsupport agreements, and work withcustomers to develop a plan the bestmeets specific needs. These plans cancover the entire machine, includingattachments, to help protect thecustomer’s investment.
Operation. Improving operatingtechniques can boost your profits.Your cat dealer has videotapes,literature and other ideas to help youincrease productivity, and Caterpillaroffers certified operator training classesto help maximize the return on yourinvestment.
Maintenance Services. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs suchas Scheduled Oil Sampling, CoolantSampling and Technical Analysis helpyou avoid unscheduled repairs.
Replacement. Repair, rebuild orreplace? Your Cat dealer can helpyou evaluate the cost involved soyou can make the right choice.
SAFETY.CAT.COM™.
14
Complete Customer SupportCat dealer services help you operate longer with lower costs.
Main System – Maximum Flow 800 L/min 212 gal/min(Total)Swing System – Maximum Flow 357 L/min 94 gal/minMaximum Pressure – 32 000 kPa 4,640 psiEquipment – NormalMaximum Pressure – 35 000 kPa 5,080 psiEquipment – Heavy LiftMaximum Pressure – Travel 35 000 kPa 5,080 psiMaximum Pressure – Swing 28 000 kPa 4,060 psiPilot System – Maximum Flow 90 L/min 24 gal/minPilot System – Maximum Pressure 4120 kPa 600 psiBoom Cylinder – Bore 190 mm 7.5 inBoom Cylinder – Stroke 1792 mm 70.6 inStick Cylinder – Bore 200 mm 7.9 inStick Cylinder – Stroke 2118 mm 83.4 inVB Family Bucket Cylinder – 180 mm 7.1 inBoreVB Family Bucket Cylinder – 1443 mm 56.8 inStrokeWB Family Bucket Cylinder – 200 mm 7.9 inBoreWB Family Bucket Cylinder – 1457 mm 57.4 inStroke
Service Refill Capacities
Fuel Tank Capacity 800 L 211 galCooling System 95 L 25 galEngine Oil 54 L 14.3 galSwing Drive (each) 12 L 3.2 galFinal Drive (each) 15 L 4 galHydraulic System 670 L 177 gal(including tank)Hydraulic Tank 310 L 82 gal
Engine
Engine Model Caterpillar C15 ATAACNet Flywheel Power 302 kW 404 hpISO 9249 302 kW 404 hpSAE J1349 302 kW 404 hpEEC 80/1269 302 kW 404 hpBore 137 mm 5.4 inStroke 171 mm 6.75 inDisplacement 15.2 L 928 in3
• The 365C L meets worldwide Tier 3 emission requirements.
• Net power advertised is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, mufflerand alternator.
• No engine power derating required below 2300 m(7,500 ft) altitude.
Weights
Operating Weight – 65 960 kg 145,430 lbLong Undercarriage
• Reach Boom, R3.6 (11'10") stick, 1025 mm (40") Bucket, and650 mm (26") shoes.
Operating Specifications
Max Reach at Ground Level 14 m 45.93 ftMax Digging Depth 9.5 m 31.17 ft
Track
Standard w/Long Undercarriage 900 mm 36 inOptional for Long 750 mm 30 inUndercarriageOptional for Long 650 mm 26 inUndercarriageNumber of Shoes Each Side – 47Long UndercarriageNumber of Track Rollers 8Each Side – Long UndercarriageNumber of Carrier Rollers 3Each Side
Swing Mechanism
Swing Speed 6.5 RPMSwing Torque 204.5 kN·m 150,850 lb ft
16 365C L Hydraulic Excavator specifications
Standards
Brakes SAE J1026 APR90Cab/FOGS SAE J1356 FEB88
ISO10262
Sound Performance
Performance ANSI/SAE J1166 OCT98
• When properly installed and maintained, the cab offeredby Caterpillar, when tested with doors and windows closedaccording to ANSI/SAE J1166 OCT98, meets OSHA andMSHA requirements for operator sound exposure limitsin effect at time of manufacture.
• Hearing protection may be needed when operating withan open operator station and cab (when not properlymaintained or doors/windows open) for extended periodsor in a noisy environment.
17365C L Hydraulic Excavator specifications
DimensionsAll dimensions are approximate.
Reach Boom Mass Boom7.8 m (25'7") 6.59 m (21'7")
Stick R4.67 m R4.15 m R3.6 m R2.84 m M3.0 m M2.57 m(15'4") (13'7") (11'10") (9'4") (9'10") (8'5")
1 Shipping Height 4960 mm 4615 mm 4390 mm 4200 mm 4560 mm 4600 mm(16'3") (15'2") (14'5") (13'9") (15'0") (15'1")
2 Shipping Length 13 170 mm 13 225 mm 13 310 mm 13 310 mm 12 150 mm 12 160 mm(43'3") (43'5") (43'9") (43'9") (39'11") (39'11")
3 Tail Swing Radius 4020 mm 4020 mm 4020 mm 4020 mm 4020 mm 4020 mm(13'3") (13'3") (13'3") (13'3") (13'3") (13'3")
4 Length to Center of Rollers 4705 mm 4705 mm 4705 mm 4705 mm 4705 mm 4705 mm(15'5") (15'5") (15'5") (15'5") (15'5") (15'5")
5 Track Length 5860 mm 5860 mm 5860 mm 5860 mm 5860 mm 5860 mm(19'3") (19'3") (19'3") (19'3") (19'3") (19'3")
6 Ground Clearance 840 mm 840 mm 840 mm 840 mm 840 mm 840 mm(33") (33") (33") (33") (33") (33")
7 Track Gauge (Shipping)* 2750 mm 2750 mm 2750 mm 2750 mm 2750 mm 2750 mm(9'0") (9'0") (9'0") (9'0") (9'0") (9'0")
8 Transport Width** 3500 mm 3500 mm 3500 mm 3500 mm 3500 mm 3500 mm(11'6") (11'6") (11'6") (11'6") (11'6") (11'6")
9 Cab Height 3535 mm 3535 mm 3535 mm 3535 mm 3535 mm 3535 mm(11'7") (11'7") (11'7") (11'7") (11'7") (11'7")
*** Track gauge in extended (working) position: 3250 mm (10'8")*** Transport width shown for 750 mm (30") shoes.
Add 150 mm (6") for 900 mm (36") shoes.Subtract 100 mm (4") for 650 mm (26") shoes.
* Operating weight includes full fuel tank and 75 kg (165 lb) operator
Major Component Weights
kg lb
Base machine with counterweight and 900 mm (36") shoes (without front linkage) 54 890 121,000
Two boom cylinders 1335 2900
Counterweight
Removal type 9300 20,500
Non-removal type 10 050 22,200
Boom (includes lines, pins and stick cylinder)
Reach boom 7.8 m (25'7") 6400 14,100
Mass boom 6.59 m (21'7") 6420 14,200
Stick (includes lines, pins, bucket cylinder and linkage)
R4.67VB (15'4") 3980 8800
R4.15VB (13'7") 3800 8400
R3.6VB (11'10") 3580 7900
R2.84VB (9'4") 3370 7400
M3.0WB (9'10") 4230 9300
M2.57WB (8'5") 4050 8900
Track roller frame [includes frame, rollers, idlers, steps, guards, final drive, 900 mm (36") shoes] – each 10 810 23,800
20 365C L Hydraulic Excavator specifications
s 2100 kg/m3 (3500 lb/yd3) max material densityn 1800 kg/m3 (3000 lb/yd3) max material density* 1500 kg/m3 (2500 lb/yd3) max material density
1200 kg/m3 (2000 lb/yd3) max material densityn
Assumptions for maximum material density rating1. Front linkage fully extended at ground line2. Bucket curled3. 100% bucket fill factor* Capacities based on SAE J296. Some calculations of capacity fall on borderlines. Rounding
may allow two buckets to have the same English rating but different metric ratings.
365C L Bucket Specifications and Compatibility
Weight Reach BoomCapacity* Width Tip Radius w/o tips Teeth Stickm3 yd3 mm in mm in kg lb Qty R4.67VB R4.15VB R3.6VB R2.84VB
VB BucketsGeneral Purpose 1.6 2.12 1025 40 2150 84.6 1912 4210 3 s s s s
2.7 3.61 1545 60 2150 84.6 2447 5390 5 s s s s
3.8 5.00 1905 75 2195 86.4 2849 6280 6 * n s
Heavy Duty 1.8 2.42 1225 48 2060 81.1 2088 4600 4 s s s s
2.8 3.68 1690 66 2060 81.1 2591 5710 5 n s s s
3.3 4.30 1905 75 2060 81.1 2866 6310 6 * n s s
Heavy Duty Rock 1.5 1.92 1025 40 2060 81.1 1967 4330 3 s s s s
2.5 3.20 1545 60 2060 81.1 2600 5730 5 s s s s
3.3 4.30 1905 75 2060 81.1 3041 6700 6 * n s s
Weight Mass BoomCapacity* Width Tip Radius w/o tips Teeth Stickm3 yd3 mm in mm in kg lb Qty M3.0WB M2.57WB
WB BucketsExcavation 4.6 6.00 2200 87 2175 85.6 4000 8810 5 n s
Extreme Excavation 4.0 5.20 2000 79 2175 85.6 3915 8620 5 s s
Rock-V-Edge 4.0 5.20 2000 79 2250 88.6 4420 9740 4 s s
n
21365C L Hydraulic Excavator specifications
Reach Boom Lift Capacities
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft
m
ft
10.5 m kg *4700 *4700 11.5835.0 ft lb *10,450 *10,450 37.56
9.0 m kg *7430 *7430 *4430 *4430 12.5530.0 ft lb *14,400 *14,400 *9800 *9800 40.92
7.5 m kg *8980 *8980 *4340 *4340 13.2425.0 ft lb *19,200 *19,200 *9600 *9600 43.28
6.0 m kg *11 000 *11 000 *10 210 9120 *6860 6770 *4360 *4360 13.6820.0 ft lb *23,950 *23,950 *21,900 19,500 *9600 *9600 44.82
–7.5 m kg *17 170 *17 170 *13 290 *13 290 *9190 *9190–25.0 ft lb *35,800 *35,800 *27,400 *27,400
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
BOOM – 7.8 m (25'7")STICK – 4670 mm (15'4")
BUCKET – 1545 mm (60") GP with HD long tipsSHOES – 900 mm (36") double grouser
UNDERCARRIAGE – LongHEAVY LIFT – On
Load atMaximum Reach
Load PointHeight
Load RadiusOver Front
Load RadiusOver Side
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
m
ft
10.5 m kg *7990 *7990 *5490 *5490 10.9035.0 ft lb *12,200 *12,200 35.29
9.0 m kg *10 310 *10 310 *5200 *5200 11.9430.0 ft lb *22,100 *22,100 *11,500 *11,500 38.90
7.5 m kg *11 150 *11 150 *9410 9150 *5120 *5120 12.6625.0 ft lb *24,350 *24,350 *18,900 *18,900 *11,300 *11,300 41.39
6.0 m kg *11 910 *11 910 *10 920 9010 *5160 *5160 13.1320.0 ft lb *25,900 *25,900 *23,750 19,250 *11,350 *11,350 43.01
–6.0 m kg *26 980 *26 980 *22 220 *22 220 *17 520 *17 520 *13 490 *13 490–20.0 ft lb *60,650 *60,650 *47,500 *47,500 *37,300 *37,300 *28,350 *28,350
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
BOOM – 7.8 m (25'7")STICK – 4150 mm (13'7")
BUCKET – 1545 mm (60") GP with HD long tipsSHOES – 900 mm (36") double grouser
UNDERCARRIAGE – LongHEAVY LIFT – On
22 365C L Hydraulic Excavator specifications
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
m
ft
10.5 m kg *6530 *6530 10.5035.0 ft lb *14,500 *14,500 33.07
9.0 m kg *10 280 *10 280 *6190 *6190 11.3530.0 ft lb *22,050 *22,050 *13,700 *13,700 36.95
7.5 m kg *12 000 *12 000 *6100 *6100 12.1225.0 ft lb *26,200 *26,200 *13,450 *13,450 39.59
6.0 m kg *14 370 *14 370 *12 700 12 040 *11 610 8920 *6150 *6150 12.6120.0 ft lb *31,100 *31,100 *27,600 25,850 *24,250 19,000 *13,550 *13,550 41.30
–6.0 m kg *19 410 *19 410 *15 570 *15 570 *11 540 *11 540–20.0 ft lb *41,300 *41,300 *32,900 *32,900 *23,550 *23,550
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
BOOM – 7.8 m (25'7")STICK – 3600 mm (11'10")
BUCKET – 1545 mm (60") GP with HD long tipsSHOES – 900 mm (36") double grouser
UNDERCARRIAGE – LongHEAVY LIFT – On
Reach Boom Lift Capacities
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
m
ft
10.5 m kg *7440 *7440 9.3735.0 ft lb *16,550 *16,550 30.17
9.0 m kg *11 290 *11 290 *6980 *6980 10.6130.0 ft lb *25,250 *25,250 *15,450 *15,450 34.48
7.5 m kg *14 370 *14 370 *6830 *6830 11.4425.0 ft lb *31,250 *31,250 *26,850 25,750 *15,050 *15,050 37.35
6.0 m kg *18 790 *18 790 *15 600 *15 600 *13 660 11 810 *6840 *6840 11.9720.0 ft lb *40,500 *40,500 *33,750 *33,750 *29,700 25,350 *15,050 *15,050 39.17
–4.5 m kg *22 510 *22 510 *22 230 *22 230 *18 310 *18 310 *14 370 13 900–15.0 ft lb *47,900 *47,900 *39,300 *39,300 *30,450 30,000
–6.0 m kg *11 930 *11 930–20.0 ft lb
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
Load atMaximum Reach
Load PointHeight
Load RadiusOver Front
Load RadiusOver Side
BOOM – 7.8 m (25'7")STICK – 2840 mm (9'4")
BUCKET – 1545 mm (60") GP with HD long tipsSHOES – 900 mm (36") double grouser
UNDERCARRIAGE – LongHEAVY LIFT – On
23365C L Hydraulic Excavator specifications
Mass Boom Lift Capacities
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
9.0 m kg *5020 *5020 8.8930.0 ft lb *11,150 *11,150 28.76
7.5 m kg *4760 *4760 9.9225.0 ft lb *28,000 *28,000 *10,550 *10,550 32.34
6.0 m kg *14 540 *14 540 *4740 *4740 10.5520.0 ft lb *31,650 *31,650 *10,450 *10,450 34.52
–3.0 m kg *32 600 *32 600 *27 520 *27 520 *20 900 18 770 *15 260 13 110–10.0 ft lb *72,200 *72,200 *59,500 *59,500 *45,000 40,350 *32,200 28,250
–4.5 m kg *25 920 *25 920 *20 550 *20 550 *14 860 *14 860–15.0 ft lb *55,450 *55,450 *43,750 *43,750 *30,800 *30,800
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
* Limited to hydraulic capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity rating standard SAE J/ISO 10567.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
9.0 m kg *4080 *4080 9.3930.0 ft lb *9100 *9100 30.42
7.5 m kg *12 940 *12 940 *3860 *3860 10.3625.0 ft lb *27,400 *27,400 *8550 *8550 33.77
6.0 m kg *13 810 *13 810 *9960 *9960 *3840 *3840 10.9520.0 ft lb *30,050 *30,050 *18,000 *18,000 *8450 *8450 35.84
–3.0 m kg *32 550 *32 550 *29 300 *29 300 *21 970 18 710 *16 420 12 970–10.0 ft lb *72,150 *72,150 *63,350 *63,350 *47,350 40,200 *35,050 27,900
–4.5 m kg *30 660 *30 660 *23 240 *23 240 *17 190 *17 190–15.0 ft lb *65,750 *65,750 *49,700 *49,700 *36,300 *36,300
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
BOOM – 6.59 m (21'7")STICK – 3000 mm (9'10")
UNDERCARRIAGE – LongHEAVY LIFT – On
Load atMaximum Reach
Load PointHeight
Load RadiusOver Front
Load RadiusOver Side
BOOM – 6.59 m (21'7")STICK – 2570 mm (8'5")
BUCKET – 2250 mm (89") Excavation with HD long tipsSHOES – 900 mm (36") double grouser
UNDERCARRIAGE – LongHEAVY LIFT – On
BUCKET – 2250 mm (89") Excavation with HD long tipsSHOES – 900 mm (36") double grouser
24 365C L Hydraulic Excavator specifications
Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.
UndercarriageDouble grouser shoes – 900 mm (36") widthGrease lubricated trackHydraulic track adjustersIdler and center section track guardsLong, variable gaugeSteps – four
Other Standard EquipmentAuxiliary hydraulic valve for hydro-mechanical toolsCaterpillar one key security system with
locks for doors, cab and fuel capCat walks – left side and right sideCross-roller type swing bearingDrive for auxiliary pumpHand control pattern changerHeavy lift modeMirrors – left and rightS•O•SSM quick sampling valves for engine
oil and hydraulic oilSteel firewall between engine and hydraulic pumpsTravel alarm with cut off switchWiring provisions for Product Link, Auto-lube System
and lighted beacon
ElectricalAlternator – 75 ampereLights
Cab interiorPower supply in cab – 12V, 7 ampSignal/warning horn
Altitude capability to 2300 m (7500 ft) without deratingEPA Tier 3 emission compliant
High ambient cooling, 52° C (126° F) capabilitySide-by-side cooling system with separately mounted
AC condenser and variable speed fanTwo speed travelWater separator, with level indicator, for fuel line
GuardsHeavy duty bottom guards on upper frameHeavy duty swivel guard on undercarriageHeavy duty travel motor guards on undercarriage
Operator StationAir conditioner, heater and defroster
with automatic climate controlAshtray and 24 volt lighterAM/FM radio with antenna and two speakersBeverage/cup holderCab Glass/Glazing
Openable and retractable two-piece front windshieldStationary skylight (polycarbonate)
Coat hookConsole mounted electronic type joysticks with
adjustable gain and responseFloor matInstrument panel and gauges with full color
graphical displayLiterature compartmentLunch box storage with lidNeutral lever (lock out) for all controlsPositive filtered ventilationPressurized cabRetractable seat belt 76 mm width (3")Sunshade for windshield and skylightTravel control pedals with removable hand leversWindshield wipers and washers (upper and lower)
25365C L Hydraulic Excavator specifications
Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.
Auxiliary Controls and LinesBasic control arrangements
Combined function for 1-way or 2-way high pressurecircuits includes joysticks and modulation switch
Medium pressure circuitAuxiliary boom lines
High pressure for reach and mass boomsAuxiliary stick lines
High pressure lines for reach and mass sticks
Miscellaneous OptionsAdjustable high-back heated seat with
mechanical suspensionAdjustable high-back seat with air suspensionBoom lowering control deviceCounterweight removal systemElectric lubricator with hose reelMachine security system with
programmable keysStarting aid for cold weather with etherStick lowering control deviceStraight travel pedal
Front LinkageBooms
Mass excavation 6.59 m (21'7") with two working lightsReach 7.8 m (25'7") with two working lights
SticksM 2.57WB (8'5") for mass boomM 3.0WB (9'10") for mass boomR2.84VB (9'4") for reach boomR3.6VB (11'10") for reach boomR4.15VB (13'7") for reach boomR4.67VB (15'4") for reach boom
Bucket LinkagesVB-family for VB sticks
(available with or without lifting eye)WB-family for WB sticks
(available with or without lifting eye)Buckets – see chartTips, sidecutters and edge protectors
TrackDouble grouser 650 mm (26")Double grouser 750 mm (30")
GuardsFOGS (Falling Object Guard System) including
overhead and windshield guardsTrack guiding guards – full lengthVandal guards for windshieldWire mesh screen for windshield
365C L Hydraulic Excavator specifications26
Notes
365C L Hydraulic Excavator specifications 27
Notes
R
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”and the POWER EDGE trade dress, as well as corporate and product identity used
herein, are trademarks of Caterpillar and may not be used without permission.