DF02 Series Half-Pitch Interface Connector Copyright © 2015 JAE Electronics, Inc. v1.0 Connector Training Module
DF02 SeriesHalf-Pitch Interface Connector
Copyright © 2015 JAE Electronics, Inc.
v1.0
Connector Training Module
• Factory automation equipment
• Servo amplifier
• Robotic devices
• Telecommunication equipment
Application Examples
JAE DF02 SeriesInterface Connector
2Copyright © 2015 JAE Electronics, Inc.JAE’s Half-Pitch Interface Connector, DF02 Series
DF02 Series Overview
The DF02 series is a half-pitch interface connector. It is light weight because
of a resin-made hood and also has sufficient measures against EMI through Ni
plating shielding in order to meet industrial equipment demands of
environmental resistance, miniaturization, weight and economical.
JAE’s Half-Pitch Interface Connector, DF02 Series Copyright © 2015 JAE Electronics, Inc. 3
Combination of Products
Copyright © 2015 JAE Electronics, Inc. 4JAE’s Half-Pitch Interface Connector, DF02 Series
Line-upItem Receptacle Plug
Pin Count14, 20, 26,
36, 50 pos.
14, 20, 26,
36, 50, 68 pos.
Termination Through-hole
Soldering
(22AWG to
30AWG)
IDC
(28AWG,
30AWG)
Plug
Hood
Receptacle
Clamp Plate
Clamp Plate
Angle Type
IDC Connection Type Soldering Connection Type
Note: When using the soldering connection type plug, it is
recommended connecting the plug to a straight long,
straight long / thick cable compatible type, angle long, and
angle long / thick cable compatible type.
Straight Short Straight Long
Straight Long / Thick Wire Type
Angle Long
Angle Long / Thick Wire Type
Straight Long
Screw Lock*For IDC Only*
DF02 Series Features
Copyright © 2015 JAE Electronics, Inc.
Light Weight and Compact Interface Connector
Receptacle
• Both one-touch lock and screw-lock are applicable
• Covering contacts prevents short circuit due to contamination
• Shell-integrated hook improves twisting strength
Plug
• Usage of resin as hood material makes a connector compact, light,
and economic.
• Ni plating improves shield performance against EMI.
• Separated hoods with latch-locks realizes easy assembly and repair.
• Crimping feature saves a lot of cable assembly processes (AWG #28 to 30)
5JAE’s Half-Pitch Interface Connector, DF02 Series
DF02 Series Features
Copyright © 2015 JAE Electronics, Inc. 6JAE’s Half-Pitch Interface Connector, DF02 Series
Contacts are covered with a case in
order to reduce risk of contamination.
• Cover case prevents the contacts from
short circuiting due to contamination
• The case works as a locator for better
contact positioning
• Environmental resistance leads to a
greater longevity and reliability of the
receptacle
“Improvement of Environmental Resistance Equals Reliability”
Note: Case can not be detached
Receptacle
DF02 Series Features
Copyright © 2015 JAE Electronics, Inc. 7JAE’s Half-Pitch Interface Connector, DF02 Series
“Improvement of Twisting Strength”
Shell integrated into hook pin
• Shell of the receptacle is integrated
into the hook pin
• Peeling strength becomes more
durable and less fragile
• Prevents unconventional dismounting
from occurring
Receptacle
DF02 Series Features
Copyright © 2015 JAE Electronics, Inc. 8JAE’s Half-Pitch Interface Connector, DF02 Series
“Simplified Harness Assembly Process”
• Clamp plate installed to ensure a
secure and simplified harness assembly
• Simplified clamp plate eliminates
screws from 4 position to 2 position
Clamp Plate
Reduction of screw clamping process
General Specifications
Copyright © 2015 JAE Electronics, Inc.
Specifications Requirement
Current Rating 0.5A / 1pos.
Rated Voltage AC250Vr.m.s
Contact Resistance35m max. (initial)
Variance ±25m max. (after test)
Insulation ResistanceIndividual connector 100M min. (initial)
10M min. (after test)
Dielectric Withstanding
Voltage
Individual connector AC500Vr.m.s (initial)
AC300Vr.m.s (after test)
Operating Temperature -20 Deg. C to +80 Deg. C
9JAE’s Half-Pitch Interface Connector, DF02 Series
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Receptacle
No. of
ContactsPart Number A B C D
14 DF02R014NA1 12.64 19.5 9.6 29.5
20 DF02R020NA1 16.45 23.4 13.4 33.4
26 DF02R026NA1 20.26 27.2 17.2 37.2
36 DF02R036NA1 26.61 33.5 23.6 43.5
50 DF02R050NA1 35.5 42.4 32.5 52.4
10JAE’s Half-Pitch Interface Connector, DF02 Series
AB
C
D9.35
11.5
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Plug
Soldering Connection Type
No. of
ContactsPart Number A B
14 DF02P014F22A11 7.62 12.84
20 DF02P020F22A11 11.43 16.65
26 DF02P026F22A11 15.24 20.46
36 DF02P036F22A11 21.59 26.81
50 DF02P050F22A11 30.48 35.7
13.5
B
8.4A
*Unit: mm*
Applicable Wire
Applicable Wire: 22~30AWG equivalent
Applicable Outer Dia.: φ1.1 max.
11JAE’s Half-Pitch Interface Connector, DF02 Series
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Plug
IDC Connection Type
Applicable
Wire
No. of
ContactsPart Number A B
For
28AWG
14 DF02P014G28A1 7.62 12.84
20 DF02P020G28A1 11.43 16.65
26 DF02P026G28A1 15.24 20.46
36 DF02P036G28A1 21.59 26.81
50 DF02P050G28A1 30.48 35.7
68 DF02P068G28A1 41.91 47.13
For
30AWG
14 DF02P014G30A1 7.62 12.84
50 DF02P050G30A1 30.48 35.7
*Unit: mm*
Applicable Wire
- 28 AWG IDC Connection Type
Applicable Outer Dia.: φ0.51~ φ0.64
- 30 AWG IDC Connection Type
Applicable Outer Dia.: φ0.51~ φ0.64
13.5
B
8.4A
12JAE’s Half-Pitch Interface Connector, DF02 Series
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Hood *Unit: mm*
Type No. of Contacts Part Number A B C
Straight Short
14 DF02C014A11 25.8 32 19.9
26 DF02C026A11 33.5 32 24.8
36 DF02C036A11 39.8 32 31.1
50 DF02C050A11 48.7 32 40.0
68 DF02C068A11 60.1 32 51.4
Straight Long
14 DF02D014A11 25.8 39 19.9
20 DF02D020A11 29.7 39 22.0
26 DF02D026A11 33.5 39 24.8
50 DF02D050A11 48.7 39 40.0
Straight Long / Thick
Wire Compatible Type
26 DF02D026A21 33.5 39 24.8
50 DF02D050A21 48.7 39 40.0
BA
C
11.5
BA
C
11.5
Straight Short
Straight Long
Straight Long /
Thick Wire
Compatible Type
13JAE’s Half-Pitch Interface Connector, DF02 Series
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Hood *Unit: mm*
TypeNo. of
ContactsPart Number A B
Angle Long 36 DF02F036A11 9.1 11.5
Angle Long / Thick Wire
Compatible Type36 DF02F036A21 12.35 14.75
48
A31.1
39.8
B
.5
Angle Long
Angle Long / Thick Wire
Compatible Type
14JAE’s Half-Pitch Interface Connector, DF02 Series
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Hood *Unit: mm*
15JAE’s Half-Pitch Interface Connector, DF02 Series
Type No. of Contacts Part Number Drawing
Straight Long
Screw Lock36 DF02D036B11 SJ115090
39
43.5 12.1
32.2
Dimensions
Copyright © 2015 JAE Electronics, Inc.
Clamp Plate *Unit: mm*
AC
No. Part Number A B CApplicable Hood
14, 20, 26 pos. 36, 50, 68 pos.
01 DF02HCLP01A 12.2 3.7 5.65 Yes No
02 DF02HCLP02A 12.2 4.3 5.75 Yes No
03 DF02HCLP03B 14.2 1.15 4.75 No Yes
04 DF02HCLP04B 14.2 5 6.15 No Yes
05 DF02HCLP05A 12.2 4.65 5.65 Yes No
06 DF02HCLP06B 14.2 3.6 5.55 No Yes
07 DF02HCLP07B 14.2 3.05 5 No Yes
08 DF02HCLP08B 14.2 2.35 4.3 No Yes
09 DF02HCLP09B 14.2 1.15 3.1 No Yes
10 DF02HCLP10A 12.2 3.45 5.4 Yes No
11 DF02HCLP11A 12.2 2 3.95 Yes No
No. printed
16JAE’s Half-Pitch Interface Connector, DF02 Series
Note 1: Cover is not included in an individual soldering type plug unit.
Materials and Finishes
Copyright © 2015 JAE Electronics, Inc.
Product Part Materials /Finishes
Receptacle
Insulator 9TNY
Locator 9TNY
Lug Steel / Ni Plating
Shell Steel / Sn Plating
Nut Stainless Steel
Contact Copper Alloy / Au plating on contact area
Plug
Plug
Insulator 6-6NY
Contact Copper alloy / Au plating on contact area
Shell Steel / Ni plating
Cover (Note 1) PBT
Hood
Hood A ABS / Ni plating
Hood B ABS / Ni plating
Lock Spring Stainless Steel
Nut Steel / Ni plating
Fixing Screw Steel / Ni plating
Clamp Plate Clamp Plate Steel / Ni plating
17JAE’s Half-Pitch Interface Connector, DF02 Series
Summary
• Half pitch connector for industrial market
• Light and compact with usage of resin as hood material
• Ni plating as EMI measure
• One-touch lock for good operability
• Contacts with cover for avoiding short circuit due to contamination
• Pb and Halogen free
Copyright © 2015 JAE Electronics, Inc. 18JAE’s Half-Pitch Interface Connector, DF02 Series
Copyright © 2015 JAE Electronics, Inc.