EPRT LED RETROFIT KITS · LED RETROFIT KITS Warranty is only valid based on fixtures operating for 12 hours or less per day. 40 - 400 watt retrofit kits bring new life to old fixtures.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Warranty is only valid based on fixtures operating for 12 hours or less per day.
40 - 400 watt retrofit kits bring new life to old fixtures. No need to buy complete LED fixtures as this kit installs directly into existing fixtures. Can be installed into existing flood lights, wall packs, canopy lights, high bays and many more.
FEATURES• Great solution to reuse existing housings• Meanwell Driver• Complete kit, Installs quickly.• No mercury; No recycling costs• Light weight• High Eficiency
Housing 22 Gauge galvanized post painted steel & AL
Lens Clear acrylic lens (Frosted available)
Mounting V-hooks
Operating temperature -22~+104℉
Other
Environment Indoor
LED class LM-80
Warranty Five year
Apollo Series HighBay from Ecopower LED High-performance LED luminaire that is ideal in manufacturing and warehousing. The fixture is constructed ofsheet steel and aluminum for heat sink and thermal control . A top side access door provides easy serviceabilityby enabling unobstructed driver access.
Feature• High efficacy LED boards, 110+ lumens per watt• Optional occupancy sensor, lensed door available• Housing has top side access door for easy
access of driver• 70,000+ hours rated life• Operating temp :-22 to 104` F• 22 Ga Post painted steel housing• Dimming driver available• 120-277-volt universal voltage; 200-480vAC available option• Standard V-hook included; engineered mounting available [email protected]• Powder coated white• Can be pendant, suspended, bracket or recessed mounted
Option or enCan be ordered with multi point rear mounts d mount brackets
Pendant, suspended, bracket or recessed mounted Clear acrylic lens or frosted availableOptional occupancy sensor, lensed door available
Advantages• 10 YEAR WARRANTY • High efficacy LED boards, 130+ lumens per watt�• Housing has top side access door for easy access of driver• 70,000+ hours rated life• 22 Ga Post painted steel housing• Dimming driver standard • Standard V-hook included; engineered mounting
Manufacturing, industrial, inspection areas, clean and R&D rooms.
ECOBAY SERIES LOW, MID & HIGHBAYMulti purpose high-performance LED luminaire, ideal for manufacturing and warehousing environments. Thefixture is constructed of vented sheet steel and aluminum for optimum heat sink and thermal control. Multi pointbrackets make it ideal for inspection tunnels, cleanrooms and R&D areas. A top side access door provides easyserviceability by enabling unobstructed driver access.
TECHNICAL SPECIFICATIONS
Housing Installs into existing fixture
Mounting Yoke & DMB Driver mounting bracket included
Applications Area light, Street light, Wall pack, High bay, and Flood lights
ELECTRICAL SPECIFICATIONS
LED Engine CREE
Available Wattages 15w
Power Factor >0.9
Ambient temperature -40° to 40°C
Available Voltages 100-277vAC (standard), 347-480vAC option
OPTICAL & PERFORMANCE SPECIFICATIONS
Lumen Output 40w: 3,716L | 60w: 8,613 L (bare kit) / 7,830 L (in fixture) 80w: 7,387L | 100w: 15,345 L (bare kit) / 13,959 L (in fixture) 120w: 16,740 L (bare kit) / 15,228 L (in fixture) 150w: 21,390 L (bare kit) / 19,458 L (in fixture) 185w: 13,815L | 240w: 18,319L 320w: 46,816 L (bare kit) / 42,504 L (in fixture) 400w: 31,854L
IP Rating *IP Rating based on rating of fixture
CRI >75
Beam Angle 120° (standard), 45º option
L70 >70,000 hours
LM79 90 L/W ± 5
Certifications Approved to CSA and UL standards (UL, or equivalent, marked only when specified)
DANGER - READ ALL INSTRUCTIONS BEFORE INSTALLATIONOUR LED DEVICES MAY BE WIRED DIFFERENTLY THAN DEVICES FROM OTHER VENDORS.
USE A LICENSED ELECTRICIAN TO PERFORM THE INSTALLATION!
1. TURN OFF ALL THE POWER TO THE FIXTURE!!2. Remove the bulb, the reflector and the existing ballast. (See FIG.2)
FIG.1 FIG.2
Warning:
(1).For Longest Lifespan & Best Heat Dissipation - PERMANENTLY REMOVE THE FIXTURE’SREFLECTOR. RETROFIT WARRANTY IS VOID IF THE FIXTURE'S REFLECTOR IS NOT REMOVED.UNDER NO CIRCUMSTANCES IS IT OK TO LEAVE THE REFLECTOR IN THE FIXTURE. REMOVINGTHE REFLECTOR PROVIDES EXTRA AIR CAPACITY WHICH CAN HELP KEEP THE LED HEAD ANDDRIVER COOL.
(2).Remove the existing ballast or cut the wires to the ballast and bypass it. CONFIRM THAT THE LINEVOLTAGE IS CORRECT FOR THE DRIVER!!
3.Wipe excess dust from inside the fixture.(See FIG.3)4.Install the LED driver at the position of the previous ballast. You may customize the driver mounting plate by drillingholes so that it can be mounted into the fixture’s existing screw posts.
FIG.3 FIG.4
5. MAKE SURE THAT NOTHING WILL TOUCH OR FALL INTO THE FAN BLADES AFTER THEFIXTURE IS MOUNTED. (See FIG.5)
6.Screw the “break-off bracket” to the LED retrofit kit. (See FIG.6 & FIG.7 )7.Adjust the length of the“break-off bracket”,which can be broken off to adjust the length and fixed to the suitableposition with screws(See FIG.8)
FIG.5 FIG.6
Turn off all power to the fixture.
Install the LED driver in placeof the driver ballast.
Remove the bulb,thereflector and theexisting ballast.