Eppendorf_Microcentrifuges

SilenceSpeed

Simplicity

My Centrifuge!Flexibility and Diversity at the Highest Level

SilenceSpeed

Simplicity

2

Experience and Responsibility: A Potent Combination

Eppendorf’s decades of experience speak in favor of tried-and-tested, quality products in the field of Life Science Research. As an international biotechnology company, we are renowned globally for developing and manufacturing high-class and innovative products.

We develop solutions for the ever increasing demands encountered in everyday laboratory situations. Your laboratory processes are structured as simply, safely and flexibly as you require to suit your individual needs. We always remain true to the Eppendorf philosophy: “We aim to help improve people’s living conditions.”

Our goal is the continuous improvement of user-friend-liness, thus consistently improving quality. To achieve this goal, we are constantly working on new technology for the future lab environment.

In addition, we also offer a complete range from one source: lab equipment, accessories and consumables, all of the quality you would expect of Eppendorf and tailored to your applications.

A Consistent Demand for Quality

3

epGreen®

“Go Green” with Eppendorf

At Eppendorf, there is no confl ict between the highest level of innovation and environmental awareness – they are one mission. Going green means taking ecological responsibility when further developing our products. This includes protecting resources during development and production, as well as aiming to signifi cantly reduce your energy consumption in today’s laboratories and those of the future.

Our commitment is paying off:‡ Up to 25 % energy savings during centrifugation

runs compared to previous models‡ The use of brushless induction motors allows

us to avoid carbon particles and, therefore, fi ne dust in the air

‡ Aluminum rotors can be completely recycled when they reach the end of their life cycle

‡ Cooled centrifuges feature dynamic compressor controls to optimize energy consumption

‡ Use of CFC-free, ozone-neutral cooling agents‡ 100 % recyclable centrifuge packaging

100

80

60

40

20

0Baseline FastTemp Spinning Continuous

cooling

��Former Generation � New Generation

Po

wer

Co

nsum

pti

on

[%]

up t

o

–70

%

up t

o–6

0%

up t

o –

25%

up t

o –

20%

� Energy savings achieved through the changing generations of Eppendorf centrifuges

Responsible Handling of Resources

4

1974

1981

1986

1989

1964

In 1964 Eppendorf presented the Centrifuge 3200, the fi rst centrifuge to form an integral part of the Eppendorf Microliter system, thus revolutionizing global research in the fi eld of Life Science.

Since then, the name Eppendorf has been synonymous with innovations in development, technology, and performance. As demand grew, more models were developed every year and the tabletop centrifuges were added to the range.

The latest generation of our microcentrifuges offers properties you will come to value in your everyday lab routine.

‡ Centrifuge 3200

‡ Centrifuge 5413

‡ Centrifuge 5414

‡ Centrifuge 5415

‡ Centrifuge 5415 C

Always in Line with the Latest Lab Requirements

Eppendorf Centrifuges –In Use for Generations

5

20002006

20072009 2010

Eppendorf provides microcentrifuges for daily laboratory use by operators with particularly high quality demands. Your lab applications benefi t from our decades of expe-rience in the designing of centrifuges. The continuous testing and improvement of our development and pro-duction processes allow us to guarantee a particularly high standard of safety and quality for many years.

Our microcentrifuges …‡ can be operated intuitively,‡ are safe to operate,‡ are extremely quiet, even when operated

without a rotor lid,‡ have aerosol-tight rotors for your safety,‡ offer advanced compressor technology for effi cient

cooling behavior in their cooled variants.

‡ Centrifuge 5415 D

‡ Centrifuge 5415 C

‡ Centrifuge 5424, Centrifuge 5418

‡ Centrifuge 5430

‡ Centrifuge 5430 R

‡ Centrifuge 5424 R, Centrifuge 5418 R

Quality is Timeless

6

*1

Silence | Speed | Simplicity®

You place high demands on your centrifuges. They must be available at all times as a reliable partner in the laboratory. This means they should be tailored to your individual requirements as far as possible.

It goes without saying that all microcentrifuges are developed to meet the strictest safety requirements. At the same time, they are quieter, faster and simpler than ever – in keeping with our motto: Silence | Speed | Simplicity.

These quality aspects also form the basis for Eppendorf’s larger tabletop centrifuges. Benefit from optimally aligned lab equipment: use quality consumables to ensure ultimate sample safety. Experience very special comfort every day!

Find out more about other Eppendorf products on pages 31/32 of this brochure or online at www.eppendorf.com.

Pure Experience: Eppendorf Microcentrifuges

7

Silence

Speed

Simplicity

Silence

Quiet – for a pleasant working environmentOur innovative OptiBowl concept allows us to offer you significant assistance without having to compromise volume in the lab. Disruptive operational noise is reduced considerably with the latest generation of devices. Save a work step – with the Centrifuge 5418, Centrifuge 5418 R, Centrifuge 5424 and Centrifuge 5424 R models, you can easily do without the rotor lid*.

* only in the case of samples to be centrifuged in a non aerosol-tight manner

Speed

Fast – the right speed for each application, up to more than 30,000 × g Decide for yourself how quickly or gently you want to centrifuge your samples. We offer the ideal centrifuge for every task: and at a speed of over 30,000 × g in the case of Centrifuge 5430 and Centrifuge 5430 R. For Centrifuge 5424 R, a prior cooling of approx. 21 °C to 4 °C is possible within 8 minutes.

Simplicity

Simple – thanks to intuitive operationFor us, intuitive operation means that every one of your employees can operate the devices. Immediately, and without extra effort to familiarize themselves. The family concept means that the operation of the different Eppendorf centrifuge models is very similar – once you know one, you know them all.Routine daily processes are mastered quickly and simply. The ergonomic lid clip principle of the devices is particularly convenient. You can always close the device safely and reliably by applying minimal pressure to the lid. Furthermore, the low loading height on our centri-fuges makes it easier to remove rotors and individual samples.

Our rotors are increasingly being equipped with the QuickLock rotor lid system. Just a quarter turn, and the rotor lid is fixed in place.

8

The aim of all Eppendorf devices is to be safe and reliable. Only this way can we consistently guarantee the highest possible lab standards, as you require for your daily work. Your benefi ts:

‡ Occupational safetyOur latest generation of microcentrifuges is equipped with an aerosol-tight*2 rotor lid, which can be recognized by its red rotary knob. The aerosol-tight rotors can be removed from the centrifuge in a closed state, and can then be opened in a safety cabinet.

‡ CompactnessWith their small footprint, even small labs have enough space for our microcentrifuges. The low loading height makes it even easier and more comfortable to replace rotors and samples.In the case of cooling centrifuges, compact and high-performance compressors ensure a well aligned provision of the necessary cooling performance in a small space.

‡ Time-savingThe Centrifuge 5424 R uses the FastTemp function to cool from 21 °C to 4 °C in just 8 minutes. In the case of the Centrifuge 5430 R, the FastTemp pro allows you to structure the cooling process with even less complication, using the programmable preset time. Decide when the centrifuge is to start independently with a FastTemp run for pre-cooling.

Your Benefi ts

Your Microcentrifuges – As Safe and Flexible as Possible

‡ Within Centrifuge 5424, the air is guided outside the rotor chamber via circumferential cooling fi ns. The heat arising in the rotor chamber is effi ciently discharged outside. The benefi t to you? A very quiet centrifuge, as the air turbulence in the chamber is reduced.

9

‡ Flexibility Our centrifuges have a large selection of rotors. In the case of Centrifuge 5430 and Centrifuge 5430 R, eight different rotors and a large selection of adapters are available: for 0.2 mL PCR vessels and PCR plates up to 50 mL vessels.

‡ User friendliness Most of our models can, as an option, be operated by rotary knobs to rapidly configure the parameters, or using a keypad for simple cleaning.

‡ Low noise levels Using our OptiBowl concept for Centrifuge 5418, Centrifuge 5418 R, Centrifuge 5424 and Centrifuge 5424 R, it is also possible to centrifuge quietly without a rotor lid – unless, of course, you wish to work in an aerosol-tight manner.

‡ ErgonomicsYou can always close the device safely and reliably with minimum exertion – thanks to the sophisticated lid clip.

‡ Multilingualism Centrifuge 5430 and Centrifuge 5430 R come with user instructions in four languages – English, German, French and Spanish.

10

Eppendorf microcentrifuges are renowned for their reliability, diversity, and occupational safety. Our centrifuges are systematically tailored to your individual requirements.

The compact and ergonomic design also saves space and can be easily integrated in the smallest laboratories.

Large Range for any Requirement

Impressive Diversity

Technical specifi cations

Model MiniSpin®/ MiniSpin plus Centrifuge 5418/ 5418 R Centrifuge 5424/ 5424 R Centrifuge 5417 R 5430/ 5430 R

Personal model Small and compact – for extra small footprints

Beginner model

Simple and intuitive – easy to use. The cooled Centrifuge 5418 R can be confi gured between 0 °C and 40 °C

Standard lab model

Reliable and fl exible – always functional. The temperature range of the cooled model is between –10 °C and 40 °C

High-performance model

Robust lab assistant. The cooled device has a temperature range of –9 °C to 40 °C

Versatile model

Speed and performance – always a step ahead. The temperature range of the cooled model is between –11 °C and 40 °C

Max. rotor capacity (1.5/ 2.0 mL) 12 18 24 30 30 ( 6 × 50 mL, 2 × MTP)

Max. RCF 12,100 × g / 14,100 × g 16,873 × g 20,238 × g / 21,130 × g 25,000 × g 30,130 × g

Max. RPM 13,400 / 14,500 14,000 14,680 / 15,000 16,400 17,500

Rotors available 2 1 4 5 8

Dimensions (W × D × H) in cm 23 × 24 × 13 21 × 30 × 21 / 30 × 46 × 25 24 × 32 × 23 / 29 × 48 × 26 31 × 60 × 25 33 × 42 × 25 / 38 × 64 × 29

Height with lid open 25 cm 43 cm / 52 cm 44 cm / 51 cm 54 cm 56 cm / 63 cmRotor options, incl. max. RCF

12-place for 1.5/2.0 mL tubes 12,100 × g / 14,100 × g – – – –

18-place for 1.5/2.0 mL tubes – 16,873 × g – – –

24-place for 1.5/2.0 mL tubes – – 20,238 × g / 21,130 × g 25,000 × g 30,130 × g

30-place for 1.5/2.0 mL tubes – – – 20,800 × g 20,817 × g

Kit rotor for spin column kits and 1.5/2.0 mL tubes

– – 17,347 × g – 19,090 × g

PCR strip rotor 9,840 × g / 11,520 × g – 17,829 × g 10,600 × g 13,543 × g

Plate rotor – – – – 4,680 × g

Rotor for 15/50 mL Falcon tubes – – – – 7,197 × g

Swing-bucket rotor for 1.5/2.0 mL tubes – – – 10,600 × g –

Cryo rotor – – – – 8,320 × gIn many cases, the rotors are also available in a certifi ed aerosol-tight*2 variant or with PTFE coating for higher resistance to chemicals.

11

Select your individual microcentrifuge: These are available in different strengths of performance and variants – cooled or uncooled.

This way, you can fi nd a model that meets your demands. Discover the new generation of microcentrifuges with its large selection of accessories.

Technical specifi cations

Model MiniSpin®/ MiniSpin plus Centrifuge 5418/ 5418 R Centrifuge 5424/ 5424 R Centrifuge 5417 R 5430/ 5430 R

Personal model Small and compact – for extra small footprints

Beginner model

Simple and intuitive – easy to use. The cooled Centrifuge 5418 R can be confi gured between 0 °C and 40 °C

Standard lab model

Reliable and fl exible – always functional. The temperature range of the cooled model is between –10 °C and 40 °C

High-performance model

Robust lab assistant. The cooled device has a temperature range of –9 °C to 40 °C

Versatile model

Speed and performance – always a step ahead. The temperature range of the cooled model is between –11 °C and 40 °C

Max. rotor capacity (1.5/ 2.0 mL) 12 18 24 30 30 ( 6 × 50 mL, 2 × MTP)

Max. RCF 12,100 × g / 14,100 × g 16,873 × g 20,238 × g / 21,130 × g 25,000 × g 30,130 × g

Max. RPM 13,400 / 14,500 14,000 14,680 / 15,000 16,400 17,500

Rotors available 2 1 4 5 8

Dimensions (W × D × H) in cm 23 × 24 × 13 21 × 30 × 21 / 30 × 46 × 25 24 × 32 × 23 / 29 × 48 × 26 31 × 60 × 25 33 × 42 × 25 / 38 × 64 × 29

Height with lid open 25 cm 43 cm / 52 cm 44 cm / 51 cm 54 cm 56 cm / 63 cmRotor options, incl. max. RCF

12-place for 1.5/2.0 mL tubes 12,100 × g / 14,100 × g – – – –

18-place for 1.5/2.0 mL tubes – 16,873 × g – – –

24-place for 1.5/2.0 mL tubes – – 20,238 × g / 21,130 × g 25,000 × g 30,130 × g

30-place for 1.5/2.0 mL tubes – – – 20,800 × g 20,817 × g

Kit rotor for spin column kits and 1.5/2.0 mL tubes

– – 17,347 × g – 19,090 × g

PCR strip rotor 9,840 × g / 11,520 × g – 17,829 × g 10,600 × g 13,543 × g

Plate rotor – – – – 4,680 × g

Rotor for 15/50 mL Falcon tubes – – – – 7,197 × g

Swing-bucket rotor for 1.5/2.0 mL tubes – – – 10,600 × g –

Cryo rotor – – – – 8,320 × gIn many cases, the rotors are also available in a certifi ed aerosol-tight*2 variant or with PTFE coating for higher resistance to chemicals.

*1

12

Compact Solution with Ultimate Operating Comfort

Your Personal Centrifuges: MiniSpin® and MiniSpin® plus™

The high-performance, user-friendly microcentrifuges MiniSpin and MiniSpin plus are designed to save space. With their quiet performance, they are particularly valued where rapid and individual access is required in the course of daily lab processes. Both microcentrifuges offer a high degree of comfort and ultimate safety.

Product characteristics of MiniSpin / MiniSpin plus

‡ Extremely compact and robust, need little space ‡ Max. 12,100 × g (13,400 rpm)‡ Max. rotor capacity 12 × 1.5/ 2.0 mL, adapters are available

for smaller tubes‡ Autoclavable rotors‡ Separate Short Spin key for fast centrifuging ‡ Maintenance-free drive with astonishingly quiet run‡ Automatic lid release after run – prevents warming of samples

and allows rapid access

Additional product characteristics of MiniSpin plus

‡ Max. 14,100 × g (14,500 rpm) ‡ Continuous centrifugation possible‡ Timer can be set up to 99 minutes‡ Simple confi guration/switching between rpm and RCF

13

Description Order number

MiniSpin®, with 12-position rotor

230 V/50–60 Hz 5452 000.018

MiniSpin® plus™, with 12-position rotor

230 V/50–60 Hz 5453 000.011

Rotors and accessories

Rotor F-45-12-11, incl. rotor lid 5452 720.008

Rotor lid (stainless steel) for rotor F-45-12-11, incl. knurled nut 5452 702.000

Rotor for PCR strip F-55-16-5-PCR, incl. rotor lid 5452 727.007

Rotor lid (stainless steel) for rotor F-55-16-5-PCR 5452 730.008

Adapter

For 0.5 mL tubes and 0.6 mL Microtainers®, set of 6 5425 716.001

For 0.4 mL tubes, set of 6 5425 717.008

For 0.2 mL PCR tubes, set of 6 5425 715.005

Microtainer® is a registered trademark of the company Becton Dickinson.

‡ F-55-16-5-PCR

Rotor for 2 × 8 PCR tubes

Description MiniSpin MiniSpin plus

Max. RCF 12,100 × g 14,100 × g

Speed (in 100 rpm steps) 800–13,400 rpm 800–14,500 rpm

rpm/RCF switch No Yes

Rotor capacity 12 × 1.5/2.0 mL (adapter available for smaller tubes)

Rotor radius F-45-12-11F-55-16-5-PCR

6.0 cm4.9 cm

6.0 cm4.9 cm

Acceleration time up to max. speed 13 s 13 s

Braking time from max. speed 12 s 12 s

Timer 15 s to 30 min 15 s to 99 min, with continuous run function

Max. volume < 49 dB(A) < 52 dB(A)

Mains connection 230 V/50–60 Hz 230 V/50–60 Hz

Power consumption Max. 70 W Max. 85 W

Dimensions (W × D × H) 22.6 × 23.9 × 13.0 cm

Height 25 cm (with lid open)

Net weight 4.3 kg (incl. rotor)

Technical Specifi cation

Ordering Information and Accessories for all MiniSpin® Models

*1

14

Centrifuge 5418 and Centrifuge 5418 R

A Compact Entry-Level Device: Your 18-Place Microcentrifuge

‡ The rotor FA-45-18-11 for 18 × 1.5/ 2.0 mL tubes is equipped as standard with an aerosol-tight*2, unique QuickLock rotor lid for rapid and reliable closing

The 18-place microcentrifuges Centrifuge 5418 and Centrifuge 5418 R are the ideal entry-level models for your simple, daily applications. The centrifuges are suit-able for a wide range of samples and are characterized by their small size.

For example, the Centrifuge 5418 has a footprint that is not much larger than a DIN A4 sheet. Both centrifuges also possess a particularly low access height.

15

Description Centrifuge 5418 Centrifuge 5418 R

Max. RCF 16,873 × g

RPM 100–14,000 rpm (in 100 rpm steps)

Maximum rotor capacity 18 × 1.5/2.0 mL

Number of rotors 1 (rmax = 7.7cm)

Acceleration time to max. speed 16 s 13 s

Braking time from max. speed 18 s 13 s

Timer 30 s to 9:59 h, with continuous run function

30 s to 99 min., with continuous run function

Ø Volume*, with rotor lid 49 db(A) 47 dB(A)

Max. volume (with FA-45-18-11) 51 dB(A) 55 dB(A)

Mains connection 230 V/50–60 Hz


Dimensions (W × D × H) 21 × 30 × 21 cm 30 × 46 × 25 cm

Height with lid open 43 cm 52 cm

Weight without rotor 7.7 kg 22 kg

Temperature range – 0 °C to +40 °C

* The average volume was determined using a representative spot test.

Product Characteristics

Technical Specification

Ordering Information


Centrifuge 5418, incl. rotor FA-45-18-11 and rotor lid, 230 V/50–60 Hz 5418 000.017

Centrifuge 5418 R, incl. aerosol-tight*2 rotor (FA-45-18-11) and rotor lid, 230 V/50–60 Hz 5401 000.013

Rotor FA-45-18-11, incl. aerosol-tight*2 rotor lid 5418 707.005

Rotor lid for FA-45-18-11, aerosol-tight*2 5418 708.001

Spare sealing, for rotor lid FA-45-18-11, set of 5 5418 709.008

Centrifuge 5418 / 5418 R

‡ Small footprint and low access height‡ Max. rotor capacity 18 × 1.5/ 2.0 mL,

max. 16,873 × g (14,000 rpm) ‡ Aerosol-tight rotor with QuickLock rotor lid‡ Particularly quiet operation thanks to advanced

OptiBowl concept – possible with or without rotor lid ‡ Separate Short Spin key for short centrifuging ‡ Separate automatic speed/ RCF switching ‡ Automatic lid release after run – prevents warming of samples

and allows rapid access (only for Centrifuge 5418)‡ Can be used in cold room (only for Centrifuge 5418)

Centrifuge 5418 R

‡ Temperature range: 0 °C to +40 °C, remains constant at 4 °C at max. speed

‡ FastTemp to quickly cool centrifuge in advance‡ Continuous cooling keeps temperature constant, if no

centrifugation takes place and the lid remains closed‡ Special, dynamic compressor control with ECO shut-off:

optimized cooling with automatic deactivation of compressor after 8 hours of not being used, in order to reduce energy consumption and increase the life cycle of the compressor

‡ Condensation discharge prevents the accumulation of water in the chamber and reduces the risk of corrosion

*1

16


Standard in Every Lab: Your 24-Place Microcentrifuge

The versatile 24-place centrifuges are particularly quiet. The operating concept and design are based on a detailed ergonomic study and are aimed at allowing routine daily work to be completed faster and easier.

Thanks to its advanced compressor technology, the cooled variant offers even more sensitive handling of samples and allows more precise and efficient cooling. Choose between fast operation by rotary knobs or the easy-to-clean keypad. The Centrifuge 5424 R is also worth a closer look: it received the red dot design award 2011 and is tough to beat when it comes to design, innovation, functionality, and other environmental requirements.

17



‡ Max. rotor capacity 24 × 1.5/2.0 mL‡ 4 different rotors are available‡ Max. 20,238 × g (14,680 rpm) (only for Centrifuge 5424)‡ Very quiet, thanks to innovative OptiBowl concept, regardless

of whether operated with or without rotor lid‡ SOFT braking to protect sensitive samples, separate

Short-Spin key for short centrifuging ‡ Separate automatic speed/ RCF switching ‡ Automatic lid release after run – prevents warming of samples

and allows rapid access (only for Centrifuge 5424)‡ Can be used in cold room (only for Centrifuge 5424)

Centrifuge 5424 R

‡ Max. 21,130 × g (15,000 1/min)‡ Temperature range from –10 °C to +40 °C‡ FastTemp for rapid pre-cooling of the centrifuge,

e.g. from 21 °C to 4 °C in just 8 minutes.‡ Dynamic compressor control and ECO shut-off for optimized

cooling performance and increased compressor service life ‡ Condensation discharge prevents the accumulation of water in

the chamber and reduces the risk of corrosion‡ Continuous cooling keeps temperature constant, if no

centrifugation takes place and the lid remains closed

18


Max. RCF 20,238 × g 21,130 × g

RPM 100–14,680 rpm (in 50 rpm steps) 100–15,000 rpm (in 50 rpm steps)


Number of rotors 4

Acceleration time to max. speed 16 s

Braking time from max. speed 18 s

SOFT braking function Yes


Ø volume*, with rotor lid 50 dB(A) 48 dB(A)

Max. volume with FA-45-24-11 51 dB(A) 54 dB(A)





Weight without rotor 13.4 kg 21 kg

Temperature range – –10 °C to +40 °C

* The average volume was determined using a representative spot test.


‡ FA-45-24-11

Aerosol-tight rotor*2 for 24 × 1.5/2.0 mL tubes

‡ F-45-18-11-Kit

Kit rotor with raised edge for safe centrifuging of 18 × spin columns

19


‡ FA-45-24-11-Special

Aerosol-tight rotor*2 for 24 × 1.5/2.0 mL tubes, with PTFE coating for increased resistance to chemicals

‡ F-45-32-5-PCR

4 × PCR strip rotor


Centrifuge 5424, incl. aerosol-tight 24 × 1.5/2.0 mL rotor with rotor id

With rotary knobs, 230 V/50–60 Hz 5424 000.410

With keypad, 230 V/50–60 Hz 5424 000.010

Centrifuge 5424, without rotor


With keypad, 230 V/50–60 Hz 5424 000.215

Centrifuge 5424 R, incl. aerosol-tight rotor (FA-45-24-11) with lid


With keypad, 230 V/50–60 Hz 5404 000.014

Centrifuge 5424 R, without rotor


With keypad, 230 V/50–60 Hz 5404 000.219

Rotors and adapters

Rotor FA-45-24-11, incl. rotor lid, aerosol-tight*2 5424 702.007

Rotor lid, for FA-45-24-11, aerosol-tight*2 5424 703.003

Rotor FA-45-24-11-Special, incl. aerosol-tight*2 rotor lid, coated* 5424 700.004

Rotor lid, for FA-45-24-11-Special, aerosol-tight*2, coated* 5424 701.000

Rotor F-45-18-11-Kit, incl. rotor lid 5424 706.002

Rotor lid, for F-45-18-11-Kit 5424 707.009

Rotor F-45-32-5-PCR, incl. rotor lid 5424 704.000

Rotor lid, for F-45-32-5-PCR 5424 708.005

Rotor key, 5 mm 5416 301.001

Adapter, for 0.2 mL PCR tube, set of 6 5425 715.005

Adapter, for 0.4 mL tubes, set of 6 5425 717.008

Adapter, for 0.5 mL tubes and 0.6 mL Microtainer®, set of 6 5425 716.001

* PTFE coated for increased resistance to chemicals

*1

20

Centrifuge 5417 R

Your High-Performance 30-Place Microcentrifuge

The cooled, 30-place Centrifuge 5417 R only requires a small footprint – with minimum access height. The easy-to-read display and practical keypad ensure it is easy and self-explanatory to operate. With short warm-up and braking times and a large capacity throughout, the Centrifuge 5417 R can also master large sets of samples safely and reliably. The practical continuous cooling keeps your samples at the desired temperature after centrifugation.

‡ Fixed-angle rotors FA-45-30-11,

F-45-30-11 and FA-45-24-11

With 30 or 24 places for 1.5/2.0 mL tubes

21


Centrifuge 5417 R

‡ Max. rotor capacity 30 × 1.5/2.0 mL, 5 different rotors and a wide range of adapters available

‡ Max. 25,000 × g (16,400 rpm)‡ Low space requirements – low loading height‡ Separate automatic speed/RCF switch –

no long-winded recalculation required‡ Rapid centrifugation thanks to Short-Spin key with

configurable speed‡ SOFT braking to protect sensitive samples

‡ Automatic rotor detection system, automatic imbalance detection‡ Temperature range from –9 °C to +40 °C‡ FastTemp for fast pre-cooling of the centrifuges‡ Remains constant at 4 °C at maximum speed‡ Continuous cooling keeps temperature constant, if no

centrifugation takes place and the lid remains closed‡ Automatic ECO shut-off of compressor after 6 hours of

non-operation, in order to reduce energy consumption and increase the service life of the compressor

‡ Swing-bucket rotor 8 positions for 1.5/2.0 mL tubes (A-8-11). Max. speed: 10,000 rpm (max. RCF: 10,600 × g), for pellet formation on bottom of tube in case of small quantities of samples.

‡ PCR tube strip rotor (F-45-48-PCR) Max. speed 10,000 rpm (max. RCF: 10,600 × g) Up to 6 × 8 strips or 48 × 0.2 mL individual PCR tubes.

Description Centrifuge 5417 R

Max. RCF 25,000 × g



Number of rotors 5

Acceleration time to max. speed ≤ 13 s

Braking time from max. speed ≤ 12 s


Timer 10 s to 99 min, with continuous run function

Max. volume with F-45-30-11 54 dB(A)

Mains connection 230 V/50 Hz

Power consumption Max. 700 W

Dimensions (W × D × H) 31 × 60 × 25 cm

Height with lid open 54 cm

Weight 35 kg

Temperature range 9 °C to 40 °C

Technical Specifi cation

22

23


Description Max. rcf (× g) Max. speed (rpm) Rotor radius (cm) Order number

Centrifuge 5417 R, 230 V/50 Hz, cooled, without rotor 5407 000.317Fixed-angle rotor F-45-30-11 and FA-45-30-11

For 30 × 1.5/2.0 mL, with aluminum lid 20,800 14,000 9.5 5490 015.002

For 30 × 1.5/2.0 mL, with aerosol-tight*2 aluminum lid 20,800 14,000 9.5 5490 025.008

Spare aluminum lid, for F-45-30-11, not aerosol-tight 5490 004.302

Spare aluminum lid, for FA-45-30-11, aerosol-tight*2 5490 025.806

High-speed fixed-angle rotor FA-45-24-11, aerosol-tight*2


Spare aluminum lid , for FA-45-24-11, aerosol-tight*2 5490 063.007Swing-bucket rotor A-8-11


Fixed-angle rotor F-45-48-PCR for PCR strips

For 6 × 8 strips or 48 × 0.2 mL PCR tubes 10,600 10,000 9.5 5490 060.008

Adapter for all fixed-angle rotors (except PCR strip rotor)Tube size Diameter of adapter bore (mm) Set of 6 adapters

0.2 mL PCR tubes 6 5425 715.005

0.4 mL 6 5425 717.008

0.5 mL and 0.6 mL Microtainer® 8 5425 716.001

F A 45 30 11 A 4 81Rotor identificationAll Eppendorf rotors are identified using a logical principle, which converts technical specifications into a uniform sequence of numbers and letters, such as:

Fixed-angle rotor

Angle of adapter bore

Max. quantitytubes/adapters

aerosol-tight version

Ø tube/adapter bore

Swing-bucket rotor

Max. quantity of tubes/adapters

Ø tube / adapter bore

*1

24


Your Extremely Versatile, 30-Place Microcentrifuge

In the case of Centrifuge 5430 and Centrifuge 5430 R, we have taken a diverse range of individual user requests into account. The result is a fl exible tool for versatile lab applications.

A particular feature of both models is that they combine the tried-and-tested properties of Eppendorf micro-centrifuges and benchtop centrifuges in one.

Many rotors are available for a diverse range of tubes and containers for these two 30-position microcentri-fuges. They are also compact, versatile and naturally intuitive to operate.

The large, back-lit LC display easily and comprehensively guides the operator through the menu guide, which is easily understandable. All information and program parameters can be displayed as text messages in four languages: English, German, French and Spanish. Additionally, with eight different rotors, including three aerosol- tight*2, every wish is fulfi lled.



‡ High speed centrifugation up to 30,130 × g (17,500 rpm) ‡ Automatic rotor and imbalance detection ‡ Menu guide in 4 languages, with easily readable LC display ‡ Rotary knobs for rapid and simple configuration of time and

speed parameters, optional keypads for trouble-free cleaning‡ Saves up to 50 programs and has 5 program keys for rapid

access to routine programs

Centrifuge 5430 R

‡ Temperature range from –11 °C to +40 °C‡ Constant temperature of 4 °C at max. speed‡ Dynamic compressor control and ECO shut-off for optimized

cooling, longer compressor service life, and lower energy consumption

‡ Continuous cooling after end of centrifugation‡ FastTemp function for consistent pre-cooling‡ FastTemp pro for programmable pre-cooling by day and time

25

‡ Together with Eppendorf plates: perfect centrifugation!

‡ An easily cleanable keypad or rotary knobs for rapid configuration of centrifugation parameters

26

‡ Aerosol-tight*2 rotor for 30 × 1.5/ 2.0 mL tubes

allows speeds of up to 20,817 × g (14,000 rpm). The rotor is PTFE-coated for increased resistance to chemicals and simple cleaning (FA-45-30-11)

‡ Rotor for 6 × 15/ 50 mL tubes

is equipped with adapters for 15 and 50 mL Falcon tubes. With the 50 mL adapters, 50 mL skirted Falcon tubes can also be used. Other adapters are also available. Maximum speed 7,197 × g (7,830 rpm) (F-35-6-30)

‡ Aerosol-tight*2 high-speed rotor

for 24 × 1.5/2.0 mL tubes up to 30,130 × g (17,500 rpm). PTFE-coated for increased resistance to chemicals and simple cleaning (FA-45-24-11)

‡ 18-position Cryovial rotor

with adapters. Speed up to 8,320 × g (8,900 rpm without, 7,970 × g with adapter) (F-45-18-17-Cryo)

Rotors for Centrifuge 5430 / 5430 R

27

‡ Basic rotor for 30 × 1.5/ 2.0 mL tubes

allows speeds of up to 20,817 × g (14,000 rpm). The rotor is PTFE-coated for increased resistance to

chemicals and simple cleaning (F-45-30-11)

‡ Swing-bucket rotor for 2 plates,

for MTP, PCR and deepwell plates up to a height of 29 mm; speed up to 2,204 × g (4,680 rpm) (A-2-MTP)

‡ Aerosol-tight*2 kit rotor

for 24 spin columns or 1.5/ 2.0 mL tubes. Design with raised edge for safe centrifuging with tube lids open. Centrifuges at maximum 19,090 × g (13,200 rpm) (FA-45-24-11-Kit)

‡ Rotor for 8 × 8 PCR strips

with adapters, which can be used as tube stands for pipetting; maximum speed of 13,543 × g (11,800 rpm) (F-45-64-5-PCR).

28


Max. RCF 30,130 × g


Maximum rotor capacity 30 × 1.5/2.0 mL, 6 × 50 mL, 2 × MTP

Number of rotors 8

Acceleration time* 14 s

Braking time* 15 s



Max. volume with F-45-30-11 < 58 dB(A) < 54 dB(A)


Power consumption Max. 475 W Max. 1,050 W



Weight without rotor 29 kg 56 kg

Temperature range – –11 °C to +40 °C*2

* Acceleration/braking time to/from max. speed with rotor FA-45-30-11



Centrifuge 5430 with 30 × 1.5/2.0 mL aerosol-tight*2 fixed-angle rotor (FA-45-30-11), 230 V/50–60 Hz

With rotary knobs 5427 000.410

With keypad 5427 000.216

Centrifuge 5430 without rotor, 230 V/50–60 Hz



Centrifuge 5430 R (cooled) with 30 × 1.5/2.0 mL aerosol-tight*2 fixed-angle rotor (FA-45-30-11), 230 V/50–60 Hz



Centrifuge 5430 R (cooled) without rotor, 230 V/50–60 Hz




29



Rotor F-45-30-11, incl. rotor lid, PTFE-coated 5427 712.003

Rotor lid, for F-45-30-11 5427 718.001

Rotor FA-45-30-11, incl. rotor lid, aerosol-tight*2, PTFE-coated 5427 713.000

Rotor lid, for FA-45-30-11, aerosol-tight*2, PTFE-coated 5427 719.008

Rotor FA-45-24-11-HS, incl. rotor lid, aerosol-tight*2, PTFE-coated 5427 710.000

Rotor lid, for FA-45-24-11-HS, aerosol-tight*2, PTFE-coated 5427 711.007

Rotor FA-45-24-11-Kit, incl. rotor lid, aerosol-tight*2 5427 703.004

Rotor lid, for FA-45-24-11-Kit, aerosol-tight*2 5427 704.000

Rotor F-45-18-17-Cryo, incl. rotor lid and adapter 5427 705.007

Rotor lid, for F-45-18-17-Cryo 5427 707.000

Adapter for HPLC tube (set of 18) 5427 708.006

Rotor F-45-64-5-PCR, incl. rotor lid and adapter 5427 714.006

Rotor lid, for F-45-64-5-PCR 5427 720.006

Adapter, for F-45-64-5-PCR (set of 4) 5427 717.005

Adapter, for F-45-30-11, FA-45-30-11, FA-45-24-11-HS, FA-45-24-11-Kit

Adapter, for 0.2 mL PCR tube (set of 6) 5425 715.005

Adapter, for 0.4 mL tubes (set of 6) 5425 717.008

Adapter, for 0.5 mL tubes and 0.6 mL Microtainer® (set of 6) 5425 716.001

Rotor F-35-6-30, incl. rotor lid and adapter for 15/50 mL Falcon® tubes 5427 716.009

Rotor lid, for F-35-6-30 5427 715.002

Rotor A-2-MTP, incl. 2 MTP buckets and wind shield 5427 700.005

Wind shield face plate, for A-2-MTP 5427 725.008

Spare MTP bucket, for A-2-MTP (set of 2) 5427 722.009

Adapter, PCR 96-well plate (set of 2) 5825 711.009

Adapter, PCR 384-well plate (set of 2) 5825 713.001

CombiSlide adapter, for up to 12 slides (set of 2) 5825 706.005

Adapter plates, with border in SBS format (set of 2) 5825 718.003

Rotor key 5416 301.001

Rotor key for high-speed rotor FA-45-24-11-HS (torque) 5427 730.001

Technical Information

30

Eppendorf Centrifuge 5804/ 5804 R and Centrifuge 5810/ 5810 R Known around the world for their quality, durability and reliability, Centrifuges 5804/ 5804 R and Centrifuges 5810/ 5810 R represent attractive solutions for applications with medium to high capacity.

Do you want to centrifuge multiple tubes at the same time, or large tubes at high speeds, cooled or uncooled? Our versatile benchtop centrifuges, with their compre-hensive and fl exible range of rotors and adapters, will master almost any centrifugation challenge: regardless of whether you use tubes, bottles or plates.

Eppendorf Centrifuge 5702 / 5702 R / 5702 RH The 5702 centrifuge range was developed for different applications. Our uncooled devices are frequently used in clinical laboratories, in particular, while cell culture laboratories prefer to use our cooled devices. Their compact design means they fi t on almost any lab bench, and their quiet operation helps to improve your working environment.

Other Eppendorf Centrifuges

Eppendorf Benchtop Centrifuges: Equal to any Task

Find out more about Eppendorf benchtop centrifuges: www.eppendorf.com/centrifuges

Description Centrifuge 5702/ 5702 R/ 5702 RH Centrifuge 5804/ 5804 R Centrifuge 5810/ 5810 R

Maximum RCF

– Fixed-angle rotor 2,750 × g 20,800 × g 20,800 × g

– Swing-bucket rotor 3,000 × g 4,500 × g 4,500 × g

– Plate rotor – 2,250 × g 3,486 × g

Maximum capacity 4 × 90 mL 4 × 100 mL 4 × 500 mL

Rotor options 5 8 14

Temperature range n.a. / –9 °C to 40/42 °C n.a. / –9 °C to 40 °C n.a. / –9 °C to 40 °C

a

b

Eppendorf Safe-Lock Tubes are the result of 50 years of constant improvement and further development. Original Safe-Lock Tubes are renowned for extraordinary stability during centrifugation, perfect closing and a high degree of protection against evaporation. You can count on our original Eppendorf Safe-Lock Tubes for perfect centrifugation.

Product characteristics and benefits

‡ Safe-Lock locking mechanism prevents the lid from opening during incubation

‡ Precise sealing of tubes for lowest possible rates of evaporation‡ Large, roughened lid for simple labeling of tubes‡ High degree of safety and stability during centrifugation‡ Tubes are made of brand-new polypropylene of the highest

quality - free from softening agents, biocides or release agents‡ Batch-certified Biopur or PCR clean quality

The Perfect Addition: Safe-Lock Tubes

Highest Quality, in Keeping with Tradition

Tests at 30,000 × g show that other tubes (a) can break during centrifugation. Samples can be lost as a result – Eppendorf Safe-Lock Tubes (b) allow fast and safe centrifugation.

Volume 0.5 mL 1.5 mL 2.0 mL

Safe-Lock Tubes, Eppendorf Quality per 500 pcs per 1,000 pcs per 1,000 pcs

Colorless** 0030 121.023 0030 120.086 0030 120.094

Safe-Lock Tubes, PCR clean per 500 pcs per 1,000 pcs per 1,000 pcs

Free from DNA, DNase, RNase and PCR inhibitors 0030 123.301 0030 123.328 0030 123.344

Safe-Lock Tubes, Eppendorf Biopur per 50 pcs per 100 pcs per 100 pcs

Individually packed, sterile, free from pyrogen, RNase, DNA and ATP

0030 121.570 0030 121.589 0030 121.597

* Safe-Lock Tubes, Eppendorf Quality and PCR clean: up to 30,000 × g with 0.5 mL and 1.5 mL tubes, up to 25,000 × g with 2 mL tubes. Safe-Lock Tubes, Biopur: up to 22,000 × g for all tube sizes.** Safe-Lock Tubes are available in amber, blue, green, red and yellow.


Find out more about Eppendorf Safe-Lock Tubes: www.eppendorf.com/consumables

Register Now!

ep-points

Register your Eppendorf devices online now to benefi t from many advantages! For each Eppendorf device registered, you will imme-diately receive ep-points as a bonus. In addition, you can manage your devices easily online and are always kept up-to-date with the latest news.*3

www.eppendorf.com/myeppendorf

Falc

on® a

nd M

icro

tain

er® a

re re

gist

ered

trad

emar

ks o

f the

com

pany

Bec

ton

Dic

kins

on. O

ptiB

owl®

and

Sile

nce|

Spe

ed|S

impl

iciti

y® a

re re

gist

ered

trad

emar

ks o

f Epp

endo

rf N

orth

Am

eric

a, In

c. E

ppen

dorf

®, B

iopu

r®, e

pGre

en® a

nd M

iniS

pin®

are

regi

ster

ed

trad

emar

ks o

f Epp

endo

rf A

G. Q

uick

Lock

, Min

iSpi

n pl

us, E

ppen

dorf

Qua

lity,

Epp

endo

rf S

afe

Lock

Tub

es a

nd K

it-R

otor

are

trad

emar

ks o

f Epp

endo

rf A

G. A

ll rig

hts

rese

rved

, inc

ludi

ng a

ll di

agra

ms

and

fi gur

es. C

opyr

ight

© 2

011

by E

ppen

dorf

AG

. O

rder

no.

A54

X X

13 0

20/G

B1/

5T/0

811/

FEE

L/K

R. P

rinte

d in

Ger

man

y us

ing

clim

ate-

neut

ral m

etho

ds.

Your local distributor: www.eppendorf.com/worldwideEppendorf AG · 22331 Hamburg · Germany · Tel: +49 40 53801-0 · Fax: +49 40 538 01-556 · E-mail: [email protected]

Eppendorf North America, Inc. · 102 Motor Parkway · Hauppauge, N.Y. 11788-5178 · USATel: +1 516 334 7500 · Toll free phone: +1 800-645-3050 · Fax: +1 516 334 7506 · E-mail: [email protected]

Application Support Europe: Tel: +49 1803 666 789 (Price based on calling rates for destinations outside of Germany; 9 ct/min from a German landline; maximum rate for cell phone calls 42 ct/min) · [email protected]

North America: Tel: +1 800 645 3050 · E-mail: [email protected] Pacifi c: Tel: +60 3 8023 6869 · E-mail: support_asiapacifi [email protected]

*1 Eppendorf centrifuges are used to separate substance mixtures of various densities and, in particular, prepare and process samples from the human body within the scope of in-vitro diagnostic applications so that the in-vitro diagnostic can be used according to its specifi c function. For this reason, centrifuges, as in-vitro accessories, are in-vitro diagnostic devices as defi ned by Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices. Eppendorf centrifuges are exclusively intended for indoor use by trained specialists.

*2 The aerosol tightness has been tested and confi rmed in accordance with the procedure of Bennett et al. from the Centre for Applied Micro biology & Research in Porton Down, CAMR, Great Britain, in accordance with annex AA of IEC 1010-2-020. In the test procedure, biological material (bacteria) is released in a closed rotor and in a closed square vessel. Air samples and swabs from inside the centrifuge are examined for bacterial contamination, in order to ensure that no biological material escaped from the closed rotor or closed square vessel during the run.

*3 Not available in all countries.

Technical specifi cations subject to change.

Eppendorf_Microcentrifuges

Documents

company becton

representative

closed square

run prevents

lid open weight

reduce energy

dynamic compressor

5060 hz rotors