1 Tips and Tricks from Oracle® Hyperion Enterprise Performance Management System Infrastructure Development February 2010 Issue 33 Where can I find typical deployment architecture diagrams and communication flows for EPM System 11.1.1.3? The EPM System 11.1.1.3 deployment architecture in the form of a PowerPoint presentation and component communications in the form of a spreadsheet are available in the whitepaper library on OTN . In addition, this information has been compiled separately for each product domain, as shown in this document. Instructions for Using the EPM System Component Communications Spreadsheet The EPM System Component Communications spreadsheet displays all components for each EPM System product domain and its associated communications, including port and protocol information. Each column in this spreadsheet has been set up with filtering, enabling you to filter the information to quickly analyze any domain or specific component interaction. One of the suggested ways to analyze and use the spreadsheet is: In Excel, select Data > Sort from the menu bar, and sort by the following three columns: From Client Component From Server Component To Server Component
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Tips and Tricks from Oracle® Hyperion Enterprise Performance Management System Infrastructure Development
February 2010 Issue 33
Where can I find typical deployment architecture diagrams and communication flows for EPM System 11.1.1.3? The EPM System 11.1.1.3 deployment architecture in the form of a PowerPoint presentation and component communications in the form of a spreadsheet are available in the whitepaper library on OTN. In addition, this information has been compiled separately for each product domain, as shown in this document. Instructions for Using the EPM System Component Communications Spreadsheet The EPM System Component Communications spreadsheet displays all components for each EPM System product domain and its associated communications, including port and protocol information. Each column in this spreadsheet has been set up with filtering, enabling you to filter the information to quickly analyze any domain or specific component interaction. One of the suggested ways to analyze and use the spreadsheet is: In Excel, select Data > Sort from the menu bar, and sort by the following three columns: From Client Component From Server Component To Server Component
The data is arranged such that you can view all client-to-server communications and all server-to-server communications easily. To view the information for a specific domain or product: 1. Select the column (for example, "Planning Domain").
NOTE: If you are unable columns on the right side of the spreadsheet, you may need to select Window > Unfreeze Panes.
2. In the first cell of that column, click the button to show the drop-down list and select Yes. The resulting output shows all components and their associated communications for only the Planning domain. You can use this information in conjunction with the typical deployment architecture shown in <PUT WORD DOC NAME HERE>.
3. After analyzing a specific domain, select All from the drop-down list in that column to expand the view back to its original state.
To create a view that includes only the interactions of a specific component, such as the Essbase Administration Services desktop client: 1. In the "From Client Component" column, click the button to show the drop-down
list.
2. Select the desired component (for example, "Essbase Administration"). The view now shows all interactions for the Essbase Administration Services client that occur in the selected domain.
3
What is the typical architecture for a Planning deployment for EPM System 11.1.1.3?
The following diagram shows a typical architecture for a Planning deployment:
Notes:
• The EPMA box in the diagram above represents all components of Performance Management Architect (EPMA). Please refer to the Performance Management Architect diagram for detailed information on EPMA components.
• Clients not in front of a VIP/Load Balancer communicate directly with their
respective servers.
• Essbase Admin Web App, Shared Services Web App and Essbase Provider Web App are Front Ended by Apache by will also be accessed directly in some use cases.
4
What are the communication flows between components in a typical 11.1.1.3 Planning deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component Protocol Port Range
How to Change the Port
Browser Calc Manager WebApp HTTP 8500 See the Installation Start Here
Browser CMC HTTP 55000 See the Installation Start Here
Browser Essbase Admin WebApp HTTP 10080 See the Installation Start Here
Browser Essbase Admin WebApp HTTP 10080 See the Installation Start Here
Browser Financial Reporting WebApp HTTP 8200 See the Installation Start Here
Browser Planning WebApp HTTP 8300 See the Installation Start Here
Browser R&A WebApp HTTP 45000 See the Installation Start Here
Browser Shared Services WebApp HTTP 28080 See the Installation Start Here
Browser Shared Services WebApp HTTP 28080 See the Installation Start Here
Browser Web Analysis WebApp HTTP 16000 See the Installation Start Here
Browser Workspace WebApp HTTP 45000 See the Installation Start Here
Browser Workspace WebApp HTTP 45000 See the Installation Start Here
Essbase Administration
Essbase Admin WebApp HTTP 10080 See the Installation Start Here
Essbase Administration
Essbase Admin WebApp HTTP 10080 See the Installation Start Here
Essbase Administration
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Essbase Administration
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting Studio
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Financial Reporting Studio
Essbase Provider WebApp HTTP 13080 See the Installation Start Here
Financial Reporting Studio
Essbase Provider WebApp HTTP 13080 See the Installation Start Here
Financial Reporting Studio
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp HTTP 8200 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp RMI Dynamic See the Installation Start Here
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting Studio
FR RMI Registry RMI 8299 See the Installation Start Here, “Ports” chapter
Financial Reporting Studio
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting Studio
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
Financial Reporting Studio
R&A Services TCP/IP, IIOP
6800-6805
See the Installation Start Here
Financial Reporting Studio
Shared Services WebApp HTTP 28080 See the Installation Start Here
Financial Reporting Studio
Workspace Services TCP/IP, IIOP
6800-6805
See the Installation Start Here
Financial Reporting Studio
Workspace WebApp HTTP 45000 See the Installation Start Here
SmartView Essbase Provider WebApp HTTP 13080 See the Installation Start Here
SmartView Essbase Provider WebApp HTTP 13080 See the Installation Start Here
SmartView Financial Reporting WebApp HTTP 8200 See the Installation Start Here
SmartView Planning WebApp HTTP 8300 See the Installation Start Here
SmartView Shared Services WebApp HTTP 28080 See the Installation Start Here
SmartView Shared Services WebApp HTTP 28080 See the Installation Start Here
SmartView Web Analysis WebApp HTTP 16000 See the Installation Start Here
SmartView Workspace WebApp HTTP 45000 See the Installation Start Here
Essbase Server TCP/IP 1423 See the Installation Start Here
Essbase Server Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Essbase Server OpenLDAP LDAP 28089 See the Installation Start Here, “Ports” chapter
Essbase Server Relational Database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Essbase Server Shared Services WebApp
HTTP 28080 See the Installation Start Here
Financial Reporting WebApp
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Financial Reporting WebApp
Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
Financial Reporting WebApp
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting WebApp
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting WebApp
FR RMI Registry RMI 8299 See the Installation Start Here, “Ports” chapter
Financial Reporting WebApp
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting WebApp
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
Financial Reporting WebApp
R&A Services TCP/IP, IIOP
6800-6805
See the Installation Start Here, “Ports” chapter
Financial Reporting WebApp
Relational Database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Workspace WebApp HTTP 45000 See the Installation Start Here
FR Print Server Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
FR Print Server Financial Reporting WebApp
RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
FR Print Server FR RMI Registry RMI 8299 See the Installation Start Here, “Ports” chapter
FR Print Server FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Print Server R&A Services TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Print Server Workspace Services TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Scheduler Essbase Database TCP/IP 32768-33768
See the Installation Start Here
FR Scheduler Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
FR Scheduler Essbase Server TCP/IP 1423 See the Installation Start Here
FR Scheduler Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
FR Scheduler FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
FR Scheduler FR RMI Registry RMI 8299 See the Installation Start Here, “Ports” chapter
FR Scheduler FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
What is the typical architecture for a Financial Management deployment for EPM System 11.1.1.3?
The following diagram shows a typical architecture for a Financial Management deployment:
Notes:
• The EPMA box in the diagram above represents all components of Performance Management Architect (EPMA). Please refer to the Performance Management Architect diagram for detailed information on EPMA components.
• Clients not in front of a VIP/Load Balancer communicate directly with their
respective servers.
• Shared Services Web App is Front Ended by Apache by will also be accessed directly in some use cases.
12
What are the communication flows between components in a typical 11.1.1.3 Financial Management deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component
Protocol Port Range
How to change the Port
Browser Calc Manager WebApp
HTTP 8500 See the Installation Start Here
Browser CMC HTTP 55000 See the Installation Start Here Browser Financial
Reporting WebApp
HTTP 8200 See the Installation Start Here
Browser FM IIS WebApp HTTP 80 See the Installation Start Here Browser Shared
Services WebApp
HTTP 28080 See the Installation Start Here
Browser Web Analysis WebApp
HTTP 16000 See the Installation Start Here
Browser Workspace WebApp
HTTP 45000 See the Installation Start Here
Financial Management Console
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. http://msdn2.microsoft.com/en-us/library/ms809327.aspx
Financial Management Console
FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. http://msdn2.microsoft.com/en-us/library/ms809327.aspx
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Financial Reporting Studio
FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Financial Reporting Studio
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting Studio
FR RMI Registry
RMI 8299 See the Installation Start Here
Financial Reporting Studio
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting Studio
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
Server-to-Server communications are as follows: From Server To Server Protocol Port
Range How to Change the Port
CMC Workspace Services
IIOP 6860 See the Installation Start Here
Financial Reporting WebApp
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
Financial Reporting WebApp
FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
Financial Reporting WebApp
FR Print Server
RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting WebApp
FR RMI Registry
RMI 8299 See the Installation Start Here
Financial Reporting WebApp
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting WebApp
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FM IIS WebApp FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FM IIS WebApp FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FM Server OpenLDAP LDAP 28089 See the Installation Start Here FM Server Relational
Database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool
FM Server Shared Services WebApp
HTTP 28080 See the Installation Start Here
FR Print Server FR RMI Registry
RMI 8299 See the Installation Start Here
FR Print Server FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Scheduler FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Scheduler FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Scheduler FR Print Server
RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
FR Scheduler FR RMI Registry
RMI 8299 See the Installation Start Here
FR Scheduler FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Scheduler Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
FR Scheduler Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Server FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Server FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Server Relational database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
FR Server Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
Shared Services WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Shared Services WebApp
FM LCM IIS WebApp
HTTP 80 See the Installation Start Here
Shared Services WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
Shared Services WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Web Analysis WebApp
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Web Analysis WebApp
FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Web Analysis WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Web Analysis WebApp
Shared Services WebApp
HTTP 28080 See the Installation Start Here
Web Analysis WebApp
Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
Workspace Services
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Workspace Services
OpenLDAP LDAP 28089 See the Installation Start Here
What is the typical architecture for an Essbase deployment for EPM System 11.1.1.3?
The following diagram shows a typical architecture for an Essbase deployment:
Notes:
• The EPMA box in the diagram above represents all components of Performance Management Architect (EPMA). Please refer to the Performance Management Architect diagram for detailed information on EPMA components.
• Clients not in front of a VIP/Load Balancer communicate directly with their
respective servers.
• Essbase Admin Web App, Shared Services Web App and Essbase Provider Web App are Front Ended by Apache by will also be accessed directly in some use cases.
20
What are the communication flows between components in a typical 11.1.1.3 Essbase deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component
Protocol Port Range
How to Change the Port
Browser Essbase Admin WebApp
HTTP 10080 See the Installation Start Here
Browser Shared Services WebApp
HTTP 28080 See the Installation Start Here
Essbase Administration
Essbase Admin WebApp
HTTP 10080 See the Installation Start Here
Essbase Administration
Essbase Database
TCP/IP 32768-33768
See the Installation Start Here
Essbase Administration
Essbase Server
TCP/IP 1423 See the Installation Start Here
Essbase Excel Addin
Essbase Database
TCP/IP 32768-33768
See the Installation Start Here
Essbase Excel Addin
Essbase Integration Services
TCP/IP 3388 See the Installation Start Here
Essbase Excel Addin
Essbase Server
TCP/IP 1423 See the Installation Start Here
Essbase Excel Addin
Essbase Studio Server
HTTP 9080 See the Installation Start Here
Essbase Integration Service
Essbase Database
TCP/IP 32768-33768
See the Installation Start Here
Essbase Integration Service
Essbase Integration Services
TCP/IP 3388 See the Installation Start Here
Essbase Integration Service
Essbase Server
TCP/IP 1423 See the Installation Start Here
Essbase Integration Service
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
• Clients not in front of a VIP/Load Balancer communicate directly with their
respective servers.
• Shared Services Web App is Front Ended by Apache by will also be accessed directly in some use cases.
What are the communication flows between components in a typical 11.1.1.3 Reporting and Analysis deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component
Protocol Port Range
How to Change the Port
Browser CMC HTTP 55000 See the Installation Start Here Browser Financial
Reporting WebApp
HTTP 8200 See the Installation Start Here
Browser Shared Services WebApp
HTTP 28080 See the Installation Start Here
Browser Web Analysis WebApp
HTTP 16000 See the Installation Start Here
Browser Workspace WebApp
HTTP 45000 See the Installation Start Here
Dashboard Builder Not Applicable Financial Reporting Studio
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Financial Reporting Studio
Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
Financial Reporting Studio
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp
RMI Dynamic
See the Installation Start Here
Financial Reporting Studio
FR Print Server RMI Dynamic
Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting Studio
FR RMI Registry RMI 8299 See the Installation Start Here
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting WebApp
FR RMI Registry RMI 8299 See the Installation Start Here
Financial Reporting WebApp
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting WebApp
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
Financial Reporting WebApp
Shared Services WebApp
HTTP 28080 See the Installation Start Here
Financial Reporting WebApp
Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
Financial Reporting WebApp
Workspace WebApp
HTTP 45000 See the Installation Start Here
FR Print Server FR RMI Registry RMI 8299 See the Installation Start Here
FR Print Server FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Print Server Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Scheduler Essbase Database TCP/IP 32768-33768
See the Installation Start Here
FR Scheduler Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
FR Scheduler Essbase Server TCP/IP 1423 See the Installation Start Here
FR Scheduler FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Scheduler FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Scheduler FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
FR Scheduler FR RMI Registry RMI 8299 See the Installation Start Here
FR Scheduler FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Scheduler Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
FR Scheduler Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Server Essbase Database TCP/IP 32768-33768
See the Installation Start Here
FR Server Essbase Server TCP/IP 1423 See the Installation Start Here
FR Server FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Server FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP/s://msdn2.microsoft.com/en-us/library/ms809327.aspx
FR Server Relational database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
FR Server Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
IR Services Workspace Services
IIOP 6800-6805
See the Installation Start Here
Shared Services WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Shared Services WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
Shared Services WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Shared Services WebApp
Workspace Services
TCP/IP 6800 See the Installation Start Here
Web Analysis WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Web Analysis WebApp
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Web Analysis WebApp
Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
Web Analysis WebApp
Essbase Server TCP/IP 1423 See the Installation Start Here
Web Analysis WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. http://msdn2.microsoft.com/en-us/library/ms809327.aspx
Data Synchronization WebApp
FM Server DCOM Dynamic See the Installation Start Here
Data Synchronization WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
Data Synchronization WebApp
Planning WebApp HTTP 8300 See the Installation Start Here
Data Synchronization WebApp
Relational Database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool
EPMA .NET JNI Bridge Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
EPMA .NET JNI Bridge OpenLDAP LDAP 28089 See the Installation Start Here
What is the typical architecture for a Financial Data Quality Management (FDM) deployment for EPM System 11.1.1.3?
The following diagram shows a typical architecture for an FDM deployment:
Notes:
• Clients not in front of a VIP/Load Balancer communicate directly with their respective servers.
• Shared Services Web App is Front Ended by Apache by will also be accessed
directly in some use cases.
35
What are the communication flows between components in a typical 11.1.1.3 FDM deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component
Protocol Port Range
How to change the Port
Browser ERPI Integration Adapter WebApp
HTTP 6550 See the Installation Start Here
Browser FDM IIS WebApp HTTP 80 See the Installation Start Here Browser Shared Services
WebApp HTTP 28080 See the Installation Start Here
Browser Workspace WebApp
HTTP 45000 See the Installation Start Here
FDM Workbench
FDM Load Balancer DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Workbench
FDM Load Balancer DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Workbench
FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Server-to-Server communications are as follows:
From Server Component
To Server Component
Protocol Port Range
How to change the Port
ERP Integration Adapter WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
ERP Integration Adapter WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
ERP Integration Adapter WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool
ERP Integration Adapter WebApp
Shared Services WebApp
HTTP 28080 See the Installation Start Here
FDM IIS WebApp FDM Load Balancer
DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM IIS WebApp FDM Load Balancer
DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM IIS WebApp FDM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM IIS WebApp FDM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Server Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
FDM Server FM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Server FM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Server OpenLDAP LDAP 28089 See the Installation Start Here FDM Server Relational
Database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool
FDM Server Shared Services WebApp
HTTP 28080 See the Installation Start Here
FDM Task Manager
FDM Load Balancer
DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Task Manager
FDM Load Balancer
DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Server DCOM 135 There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
FDM Task Manager
FDM Server DCOM Dynamic There is a DCOM feature that allows you to restrict the range of ports that DCOM will use to assign to applications. See "Using Distributed COM with Firewalls" technical article. HTTP://msdn2.microsoft.com/en-us/library/ms809327.aspx
Shared Services WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Shared Services WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
Shared Services WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Workspace Services
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
Workspace Webapp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
What is the typical architecture for a Profitability & Cost Management deployment for EPM System 11.1.1.3?
The following diagram shows a typical architecture for a Profitability & Cost Management deployment:
Notes:
• The EPMA box in the diagram above represents all components of Performance Management Architect (EPMA). Please refer to the Performance Management Architect diagram for detailed information on EPMA components.
• Clients not in front of a VIP/Load Balancer communicate directly with their
respective servers.
• Essbase Admin Web App, Shared Services Web App and Essbase Provider Web App are Front Ended by Apache by will also be accessed directly in some use cases.
40
What are the communication flows between components in a typical 11.1.1.3 Profitability & Cost Management deployment? Client-to-Server communications are as follows:
From Client Component
To Server Component
Protocol Port Range
How to change the Port
Browser CMC HTTP 55000 See the Installation Start Here Browser Essbase Admin
WebApp HTTP 10080 See the Installation Start Here
Browser Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
Browser Profitability WebApp
HTTP 6756 See the Installation Start Here
Browser Shared Services WebApp
HTTP 28080 See the Installation Start Here
Browser Web Analysis WebApp
HTTP 16000 See the Installation Start Here
Browser Workspace WebApp
HTTP 45000 See the Installation Start Here
Essbase Administration
Essbase Admin WebApp
HTTP 10080 See the Installation Start Here
Essbase Administration
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Essbase Administration
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting Studio
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Financial Reporting Studio
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
Financial Reporting Studio
Financial Reporting WebApp
RMI Dynamic See the Installation Start Here
Financial Reporting Studio
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting Studio
FR RMI Registry RMI 8299 See the Installation Start Here
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting Studio
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
Financial Reporting Studio
Shared Services WebApp
HTTP 28080 See the Installation Start Here
Financial Reporting Studio
Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
Financial Reporting Studio
Workspace WebApp
HTTP 45000 See the Installation Start Here
SmartView Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
SmartView Financial Reporting WebApp
HTTP 8200 See the Installation Start Here
SmartView Shared Services WebApp
HTTP 28080 See the Installation Start Here
SmartView Web Analysis WebApp
HTTP 16000 See the Installation Start Here
Server-to-Server communications are as follows:
From Server Component
To Server Component
Protocol Port Range
How to change the Port
CMC Workspace Services
IIOP 6860 See the Installation Start Here
Essbase Admin WebApp
Corporate Directories
LDAP Provider dependent
Shared Services - User Directory Configuration
Essbase Admin WebApp
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Essbase Admin WebApp
Essbase Server TCP/IP 1423 See the Installation Start Here
Essbase Admin WebApp
OpenLDAP LDAP 28089 See the Installation Start Here
Essbase Admin WebApp
Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
OpenLDAP LDAP 28089 See the Installation Start Here
Essbase Provider WebApp
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Essbase Provider WebApp
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting WebApp
Essbase Database TCP/IP 32768-33768
See the Installation Start Here
Financial Reporting WebApp
Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
Financial Reporting WebApp
Essbase Server TCP/IP 1423 See the Installation Start Here
Financial Reporting WebApp
FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
Financial Reporting WebApp
FR RMI Registry RMI 8299 See the Installation Start Here
Financial Reporting WebApp
FR Scheduler RMI Dynamic Edit the file fr_scheduler.properties located at Hyyperion Home\products\biplus\lib and change the line: HRSchdSvrPort=
Financial Reporting WebApp
FR Server RMI Dynamic Edit the file fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Print Server FR RMI Registry RMI 8299 See the Installation Start Here FR Print Server FR Server RMI Dynamic Edit the file
fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Print Server Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Scheduler Essbase Database TCP/IP 32768-33768
See the Installation Start Here
FR Scheduler Essbase Provider WebApp
HTTP 13080 See the Installation Start Here
FR Scheduler Essbase Server TCP/IP 1423 See the Installation Start Here FR Scheduler Financial Reporting
WebApp HTTP 8200 See the Installation Start Here
FR Scheduler FR Print Server RMI Dynamic Edit the file fr_printserver.properties located at Hyperion Home\products\biplus\lib and change the line HRPrintSvrPort=
FR Scheduler FR RMI Registry RMI 8299 See the Installation Start Here FR Scheduler FR Server RMI Dynamic Edit the file
fr_reportserver.properties located at Hyperion Home\products\biplus\lib and change the line: HRRepSvrPort1= and HRRepSvrPort2=
FR Scheduler Relational Database
Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.
FR Scheduler Workspace Services
TCP/IP, IIOP
6800-6805
See the Installation Start Here
FR Server Essbase Database TCP/IP 32768-33768
See the Installation Start Here
FR Server Essbase Server TCP/IP 1423 See the Installation Start Here FR Server Relational
database Database Wire Protocol
Database dependent
Connection parameters including port are set in configtool.