ePIPE lining lead pipe

ePIPE - Patented In-Place Pipe Restoration Lead-Free, Leak-Free Pipe Protection

www.epipeinfo.com

022516

A complete service starting from the water main to your tap including full in-building restoration of your piping systems. Protecting your pipes from leaks and from the leaching of toxic metals like lead and copper

Extensive In-Field and In-House R&D completed in US and UK

Lead Leaching Results

In the UK, products that are used in public water supplies are subject to review by the government regulator, Drinking Water Inspectorate (DWI). In addition to testing products to ensure they are safe when in contact with drinking water, DWI also requires testing of products intended to be applied to a lead pipe to demonstrate effectiveness of the product at reducing lead leaching. Testing for lead leaching involved 3 – 72 hours periods of “stagnation” where an actual ePIPE coated lead pipe was filled with water and left to sit for 72 hours, then tested for lead leaching. Testing involved both chlorinated and non chlorinated water exposure.

Result < .1 ppb (ug/l)

• Lining lead service pipes in London. Pipes running up to 15m, (50 ft)

• No road closures • Each line completed in less than 4 hours.

Road Crossings

Private side application – curb stop to internals

Use of engineered adaptors permit through valve application

Multiple units in one set up

www.epipeinfo.com

• Prevents leaching of heavy metals such as lead and copper • Seals leaks and presents further internal corrosion • Less disruption for the customer • Excavations are reduced • US Patented Technology • FAST - 2 hour cure • PROVEN - 10’s of 1000’s of properties protected from lead and leaks • APPROVED: UK – Reg 31. (4)(a) including lead pipes for public water supplies and WRAS US – All US Plumbing Codes, NSF Standard 61 Section 5

Summary