EOI Document for - EdCIL

EOI No.: EdCIL/EIS & EPS/PROC/JHARKHAND/2022-23/02 Dt. 29/04/2022

Page 1 of 145

EOI Document for

Expression of Interest (EOI) for Selection of Partner/Original Equipment Manufacturer (OEM)/

System Integrator (SI) for

Pre-Bid Tie-up Participation in Tender issued by Authorities of JHARKHAND Govt.

For Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years

maintenance

EOI No.: EdCIL/EIS & EPS/PROC/JHARKHAND/2022-23/02 Dated: 29/04/2022

EdCIL (India) Limited (A Govt. of India ‘Mini Ratna’ Enterprises) ‘EdCIL House’, Plot No. 18A, Sector- 16A

NOIDA – 201301 (UP), INDIA Tel: 0120-4156001-02, 4154003, 2512004-06, 0120-4310840, FAX: 0120-2515372

This document is serially numbered from page number 01 to 145.


Page 2 of 145

DISCLAIMER

The information contained in this Tender document (the "TENDER") or subsequently

provided to Bidder(s), whether verbally or in documentary or any other form by or on

behalf of the Authority or any of its employees or advisors, is provided to Bidder(s)

on the terms and conditions set out in this TENDER and such other terms and

conditions subject to which such information is provided.

This TENDER is not an Agreement and is neither an offer nor invitation by the

Authority to the prospective Bidders or any other person. The purpose of this

TENDER is to provide interested Parties with information that may be useful to them

in making their financial offers (BIDs) pursuant to this TENDER. This TENDER

includes statements, which reflect various assumptions and assessments arrived at

by the Authority in relation to the Project. Such assumptions, assessments and

statements do not purport to contain all the information that each Bidder may require.

This TENDER may not be appropriate for all persons, and it is not possible for the

Authority, its employees or advisors to consider the investment objectives, financial

situation and Particular needs of each Party who reads or uses this TENDER. The

assumptions, assessments, statements and information contained in the Bidding

Documents, especially the Feasibility Report, may not be complete, accurate,

adequate or correct. Each Bidder should, therefore, conduct its own investigations

and analysis and should check the accuracy, adequacy, correctness, reliability and

completeness of the assumptions, assessments, statements and information

contained in this TENDER and obtain independent advice from appropriate sources.

Information provided in this TENDER to the Bidder(s) is on a wide range of matters,

some of which may depend upon interpretation of law. The information given is not

intended to be an exhaustive account of statutory requirements and should not be

regarded as a complete or authoritative statement of law. The Authority accepts no

responsibility for the accuracy or otherwise for any interpretation or opinion on law

expressed herein.

The Authority, its employees and advisors make no representation or warranty and

shall have no liability to any person, including any Bidder under any law, statute,

rules or regulations or tort, principles of restitution or unjust enrichment or otherwise

for any loss, damages, cost or expense which may arise from or be incurred or

suffered on account of anything contained in this TENDER or otherwise, including

the accuracy, adequacy, correctness, completeness or reliability of the TENDER and

any assessment, assumption, statement or information contained therein or deemed

to form Package of this TENDER or arising in any way for Participation in this BID

Stage.

The Authority also accepts no liability of any nature whether resulting from

negligence or otherwise howsoever caused arising from reliance of any Bidder upon


Page 3 of 145

the statements contained in this TENDER. The Authority may in its absolute

discretion, but without being under any obligation to do so, update, amend or

supplement the information, assessment or assumptions contained in this TENDER.

The issue of this TENDER does not imply that the Authority is bound to select a

Bidder or to appoint the Selected Bidder, as the case may be, for the Project and the

Authority reserves the right to reject all or any of the Bidders or BIDs without

assigning any reason whatsoever.

The Bidder shall bear all its costs associated with or relating to the preparation and

submission of its BID including but not limited to preparation, copying, postage,

delivery fees, expenses associated with any demonstrations or presentations which

may be required by the Authority, site visits, investigations, studies, or any other

costs incurred in connection with or relating to its BID. All such costs and expenses

will remain with the Bidder and the Authority shall not be liable in any manner

whatsoever for the same or for any other costs or other expenses incurred by a

Bidder in preparation or submission of the BID, regardless of the conduct or outcome

of the Bidding Process.


Page 4 of 145

INDEX

CHAPTER SUBJECT PAGE NO.

I EXPRESSION OF INTEREST (EOI) 05-07

II OFFLINE AND ONLINE BID SUBMISSION

DOCUMENTS 08

III TERMS OF REFERENCE AND DEFINITIONS 09-10

IV INSTRUCTIONS FOR E-TENDERING 11-17

V INSTRUCTIONS TO BIDDERS 18-38

VI ANNEXURE-I TO ANNEXURE- XIV 39-67

VII FINANCIAL BID 68-145


Page 5 of 145

CHAPTER-1

EdCIL (INDIA) LTD (A GOVT. OF INDIA MINI RATNA ENTERPRISE)

SECTOR 16A, NOIDA

Subject: Expression of Interest (EOI) for Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by Authorities of JHARKHAND Govt. For Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance

EOI No.: EdCIL/EIS & EPS/PROC/JHARKHAND/2022-23/02 Dated: 29-04-2022

1. Expression of Interest (EOI) is invited from eligible bidders for Pre-Tender Tie-

up with EdCIL for “Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by Authorities of JHARKHAND Govt. For Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance”.

2. EdCIL (India) Limited, a Mini Ratna Category – I CPSE (Central Public-Sector Enterprise) Company, registered at Vijaya Building, 5th floor,17-Barakhamba Road, New Delhi – 110001 (India), was incorporated in 1981, under the Ministry of Education. It is an ISO 9001:2015 & 14001:2015 Certified Company. It is a continuously dividend paying and profit-making company and the only PSU (Public Sector Undertaking) under Ministry of Education to serve the education sector.

3. The EdCIL offers the following solutions in the Education & Human Resource Development space.

• Educational Infrastructure Services (EIS)/Educational Procurement Services

(EPS),

• Online Testing and Assessment (OTAS),

• Advisory Services (AS),

• Digital Education Services (DES),

• Oversees Education Services (OES)/Study in India Programme,

• Technical Support Group (TSGs),

4. EdCIL intends to Participate in tenders issued by Govt. Of Jharkhand for Setting up of Integrated Math’s & Science Room in the state of Jharkhand as a lead bidder. This EOI is floated for Selection of Partner/s ready to work exclusively in the above said project/similar such projects in next one year for EdCIL. If the client (Authorities of Jharkhand Govt.) award the work to the EdCIL then only the work will be awarded to the successful bidder, onboarded through the EoI for Pre-Tie-up tender.


Page 6 of 145

5. The intended agencies/firms are required to submit online bids which is mandatory for this EOI. The prospective bidders are required to submit their bids with most competitive techno-commercial offer for the above-said work. The EOI document is available on EdCIL website (www.edcil.co.in) and E-Tender Wizard (http://www.tenderwizard.com).

6. Important Information are given below:

Name of Work Expression of Interest (EOI) for Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by Authorities of JHARKHAND Govt. For Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance

Warranty Twelve months (12) warranty of all the items supplied from the date of installation for manufacturing defect only along with 3 year Maintenance cost from the date of successful Commissioning & Handing over of Integrated Math’s & Science Room items.

Performance Bank Guarantee

3% of the total work value of the successful bidder. PBG is required to be submitted within 7 days from the date of issue of LOA in favour of EdCIL (India) Limited. Additional 3% Security amount shall be deducted from Running bills. This guarantee (PBG + additional security amount) shall be valid for a period of 90 days beyond the period for 1 Year Warranty from the date of final commissioning and handing over to Client.

Tender Type (Open/ Limited/ EOI/ Auction/ Single)

Open

Tender Category (Services/ Goods/ works)

Goods

Type/Form of Contract (Work/Supply)

Supply

Product Category (Civil/ Interior Works)

Laboratory Equipment, Integrated Maths & Science laboratory

Purchaser, Place of delivery and Duration of supply.

JHARKHAND State 120 (One Hundred Twenty) Days from the date of work order along with distribution list.

The Currency in which payment shall be made

Indian Rupees (INR)

Date of Issue/Publishing 29-04-2022

Document Download/ Sale Start Date

29-04-2022

Document Download/ Sale End Date

05-05-2022 at 11:00 Hrs.

Last Date and Time for receipts of Bids

05-05-2022 up to 11:30 Hrs.

Date and Time of Opening of Bids

05-05-2022 at 12:00 Hrs.

No. of Covers (1/2/3/4) 01 (Single Packet)

Bid Validity days (180/120/90/60/30)

120 days (From last date of opening of tender)

Address for Communication Chief General Manager (EIS & EPS) EdCIL (India) Limited, 18 A, Sector-16A, Noida-U.P.-201 301, Ph. No.: 0120-4310840

Contact No. 0120-2512001 to 2512006, 0120-4156001,002,4154003

http://www.edcil.co.in/

http://www.tenderwizard.com/


Page 7 of 145

Email Address [email protected], [email protected] [email protected]

7. In case the bidder is participating in one or more than one packages the following has to be determined:

a. For participation in one package – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 8 Crore.

b. For participation in two packages – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 15 Crore.

c. For participation in all three packages – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 25 Crore.

8. Tender document shall be downloaded from electronic tender portal link

available at EdCIL Tender web page and details mentioned in the tender

document. Aspiring bidders who have not get registered in e-procurement

should get themselves register/enroll before Participating in e-tendering

process. Interested bidders are advised to go through instructions provided at

“Instructions to Bidders for e-tendering.”

9. No manual bids shall be accepted. Bids should be submitted in the E-Tendering

mode only.

10. Bidders are advised to visit the EdCIL Web site regularly for getting themselves

updated for information on this tender. Corrigendum and addendum may be

issued on the changes required. The Corrigendum/addendum are the Package

of tender documents and Bidders are supposed to upload the same, duly

signed as per the guidelines given in the tender document. Bidders are advised

to visit EdCIL e-tender web page regularly to update themselves for any

notifications for this tender.

Chief General Manager/ (EIS & EPS)

EdCIL (India) Limited, 18 A, Sector-16A, Noida-201 301

Tel: +91120-4156001,0120-4154003, 0120-2512004,05,06.

mailto:[email protected]




Page 8 of 145

CHAPTER- II

Offline and Online Bid Submission Documents

1. Offline Submissions:

1.1 The bidder is requested to submit the following documents offline to the

under mentioned address before the start of Public Online Tender Opening

Event in a Sealed Envelope at the address.

1.2 The envelope shall bear the project name, the tender number and the words

‘DO NOT OPEN BEFORE’ (due date & time).

I. Original EMD amount in the form of Demand Draft.

II. Original copy of the power-of-attorney, wherever required.

Note: The Bidder should also upload the scanned copies of all the above-

mentioned original documents as Bid-Annexure during Online Bid-Submission.

2. Online Submissions:

2.1 The Online bids (complete in all respect) must be uploaded online in One

Envelope as explained below:

Envelope

(Following documents to be provided as single PDF file)

*file size shall be less than 5 MB each.

Sl. No. Documents Content File Types

1. EOI for Selection of

Partner/Original

Equipment

Manufacturer (OEM)/

System Integrator (SI)

for Pre-Bid Tie-up

Participation in Tender

issued by Authorities of

JHARKHAND Govt.

For Set Up of

Integrated Math’s &

Science

Room in

525 Schools of

Jharkhand with

manpower and 3 years

maintenance

Organization Declaration Sheet as per

Annexure-I .PDF

2.

List of organizations/ clients where the

same products have been supplied (in last

three years) along with their contact

number(s). (Annexure-VI)

.PDF

3.

Supporting documents in support of all

claims made at Annexure-II, III, IV, V, VII,

VIII, IX, XII,XIII

.PDF

4. Corrigendum/ Addendum are also to be

signed and uploaded. .PDF

5. As per Financial Bid form .PDF


Page 9 of 145

CHAPTER-III

TERM OF REFERENCE & DEFINITIONS

Supplier “Supplier” shall mean the successful agency/ bidder, firm or corporation to whom the Purchase Order is issued for Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance

Authorized Signatory

The bidder’s representative (explicitly, implicitly, or through conduct) with the powers to commit the authorizing organization to a binding agreement. Also called signing officer/ authority having the Power of Attorney from the Competent authority of the respective Bidding firm.

EOI "EOI" means the Expression of Interest received from the prospective eligible agency/firm.

Contract “The Contract” means the agreement entered into between EdCIL and the selected bidder(s) in terms of clauses mentioned

Day “Day” means a normal working day with or without extra hours to work on the designated site of the project/ work.

Client JHARKHAND Govt.

D.D Demand Draft

EdCIL EdCIL (India) Limited, Noida (A Govt. of India Enterprise)

TC Tender Committee

PBG Performance Bank Guarantee

Security Deposit (SD)

Amount of the Order Value deposited by the Bidder and retained till the successful completion of the project (as long as the bidder fulfils the contractual agreement).

Services “Services” means the services to be delivered by the successful bidder and as required to run the project successfully as per the Contract.

TENDER “TENDER” means the Request for Proposals / Bid

Goods and Materials

“Goods and Materials” shall mean the articles, materials, equipments, Furniture Items, IT Equipments, supplier’s drawings, data and other property and all services-including design, delivery, installation, inspection and maintenance support specified or required to complete the order and incidental thereto.

Order “Order” shall mean the Purchase/ Work Order and its attachments and exhibits.

Purchaser “Purchaser” shall mean JHARKHAND Govt. where the items are to be supplied, installed and commissioned.

Consignee “Consignee” shall mean Authorized Representative of EdCIL (India) Limited / Authorized representative of Client.

GST Goods and Services Tax


Page 10 of 145

EPF Employee Provident Fund

ESI Employees State Insurance.

MSME Micro, Small and Medium Enterprises.

NSIC National Small Industry Corporation.

GOI Government of India.


Page 11 of 145

CHAPTER-IV

INSTRUCTIONS FOR E-TENDERING

1. Instructions for Online Bid Submission:

1.1 E-tendering is new technology for conducting public procurement in a transparent and secured manner. As per Government of India’s directives, EdCIL (India) Limited has adopted E-tendering.

1.2 For conducting electronic tendering, EdCIL (India) Limited has decided to

use Electronic tender portal link available with detailed information on e-tendering process at EdCIL website. This portal built using Electronic tender’s software is referred to as http://www.tenderwizard.com/EDCIL.

1.3 The bidders are required to submit soft copies of their bids electronically on

http://www.tenderwizard.com/EDCIL e-tendering website, using valid Digital Signature Certificates. The instructions given below are meant to assist the bidders in registering on the Tender Wizard E-Tendering Portal, prepare their bids in accordance with the requirements and submitting their bids online on the Tender Wizard E-Tendering Portal.

1.4 The scope of work to be tendered is available in the complete bid

documents which can be viewed /downloaded from Tender Wizard E-Tendering Portal of http://www.tenderwizard.com/EDCIL. Both Technical Bid and Financial Bid will be submitted concurrently duly digitally signed in the website http://www.tenderwizard.com/EDCIL. No claim shall be entertained on account of disruptions of internet service being used by bidders. Bidders are advised to upload their bids well in advance to avoid last minute technical snags.

1.5 All Corrigendum/Amendment/Corrections, if any, will be published on the

website http://www.tenderwizard.com/EDCIL.

1.6 It is mandatory for all the applicants to have Digital Signature Certificate (in the name of person who will sign the bid document) from any of the licensed certifying.

1.7 To Participate in the e-tendering submission, it is mandatory for the applicants

to get registered their firm/joint venture with the Tender Wizard E-Tendering Portal of http://www.tenderwizard.com/EDCIL.to have user ID & Password from Tender Wizard E-Tendering Portal.

1.8 Register your organization on Tender Wizard E-Tendering Portal by

following link http://www.tenderwizard.com/EDCILwell in advance of your first tender submission deadline on Tender Wizard E-Tendering Portal for obtaining credentials by paying Annual registration charges. Vendor Registration is Valid for 1year.

http://www.tenderwizard.com/EDCIL





file:///C:/Users/amitk/AppData/Local/Packages/microsoft.windowscommunicationsapps_8wekyb3d8bbwe/LocalState/Files/S0/8199/Attachments/Technical%20BID-NIMHANS.docx



Page 12 of 145

1.9 Get your organization’s concerned executives trained on Tender Wizard E-Tendering Portal well in advance of your first tender submission deadline on E-tender Site.

1.10 Submit your tender well in advance by relevant documents along with copy of

EMD of tender submission deadline on Tender Wizard E-Tendering Portal as there could be last minute problems due to internet timeout, breakdown, etc.

1.11 Tenders should be submitted only through Tender Wizard E-Tendering

Portal and obtain the Tender Acknowledgement copy as a proof of successful submission.

1.12 Vendors Training Program: Vendors are requested to contact at Tender

wizard Helpdesk for any information regarding E-tendering / training.

a) For online registration, intended bidders may write us at [email protected] or contact no. 080-49352000/ 9686115318/ 9650520101/ 8800445981.

b) For any further query related to Training Session, Tender Uploading/

downloading or any other query related to tender please contact Tender wizard Helpdesk.

• Telephone: 080-49352000/9686115318 or write us mail on Email Id:-

[email protected], [email protected], [email protected], [email protected]

2. Digital Signature Certificates

For integrity of data and authenticity/non-repudiation of electronic records, and to be compliant with IT Act 2000, it is necessary for each user to have a Digital Signature Certificate (DSC). Also referred to as Digital Signature Certificate (DSC) of Class 2or above, issued by a Certifying Authority (CA) licensed by Controller of Certifying Authorities (CCA) [refer http://www.cca.gov.in].

3. Registration

3.1 To use the Tender Wizard E-Tendering Portal, vendors need to register on the portal by going on the link provided at EdCIL tender webpage as http://www.tenderwizard.com/EDCIL. Registration of each organization is to be done by one of its senior persons who will be the main person coordinating for the e-tendering activities. In Tender Wizard Portal terminology, this person will be referred to as the Super User (SU)of that organization. For further details, please visit the website/portal, and click on the ‘Supplier Organization’ link under ‘Registration’ (on the Home Page) and follow further instructions as given on the site. Pay Annual Registration Fee as applicable.

file:///E:/1.Office%20Work/1.Department/1.Department/2.Other%20Department/14.EdCIL/1.Tender%20Document/Technical%20BID-NIMHANS.docx





http://www.cca.gov.in/



Page 13 of 145

3.2 After successful submission of Registration details and Annual Registration Fee, please contact Tender Wizard Helpdesk (as given below), to get your registration accepted/activated. 3.3 Important Note: 3.3.1 To minimize the problems during the use of Tender Wizard E-

Tendering Portal (including the Registration process), it is recommended that the user should use as per the instructions given under ‘Tender Wizard E-Tendering Portal User-Guidance Centre’ located on Home Page, including instructions for timely registration on Portal. The instructions relating to ‘Essential Computer Security Settings for Use of Tender Wizard E-Tendering Portal and ‘Important Functionality Checks’ should be especially taken into cognizance.

3.3.2 Please note that even after acceptance of your registration by the

Service Provider, to respond to a tender you will also require time to complete activities related to your organization, such as creation of users, assigning roles to them, etc.

4. SEARCHING FOR TENDER DOCUMENTS

4.1 There are various search options built in the Tender Wizard E-Tendering Portal, to facilitate bidders to search active tenders by several parameters. These parameters could include Tender ID/ Tender Search Code (TSC), organization name, location, date, value, etc. There is also an option of advanced search for tenders, where in the bidders may combine a number of search parameters such as organization name, form of contract, location, date, other key words etc. to search for a tender published on the Tender Wizard E-Tendering Portal.

4.2 Once the bidders have selected the tenders they are interested in, they may download the required documents/ tender schedules. This would enable the Tender Wizard E-Tendering Portal to intimate the bidders through e-mail alert in case there is any corrigendum issued to the tender document.

4.3 The bidder should make a note of the unique Tender ID/ Tender Search Code (TSC) assigned to each tender, in case they want to obtain any clarification/help from the Help desk.

5. PREPARATION OF BIDS

5.1 Bidder should take into account any corrigendum/addendum published on the portal before submitting their bids.

5.2 Please go through the tender advertisement and the tender document

carefully to understand the documents required to be submitted as Package of the bid. Please note the number of covers in which the bid documents have to be submitted, the number of documents-including the names and content of each of the document that need to be submitted.


Page 14 of 145

Any deviations from these may lead to rejection of the bid. 5.3 Bidder, in advance, should get ready the bid documents to be submitted

as indicated in the tender document/ schedule and generally, they can only be in PDF format. Bid documents may be scanned with 100dpi with black and white option.

6. SUBMISSION OF BIDS 6.1 Bidder should log into the site well in advance for bid submission and

complete all formalities of registration (at least two days in advance of the closing date) so that he/she upload the bid in time i.e. on or before the bid submission time. Bidder will be sole responsible for any delay in uploading of bid within the stipulated time.

6.2 The bidder has to digitally sign and upload the required bid documents

one by one as indicated in the tender document.

6.3 Bidder has to pay the tender fee/EMD as applicable through demand draft as per tender condition in favour of “EdCIL (India) Ltd” payable at Noida and enter details of the instruments. Original copies of demand draft for EMD/ Tender fees are required to be submitted.

6.4 A standard Financial Bid form has been provided with the tender

document to be filled by all the bidders. Bidders are requested to note that they should necessarily submit their financial bids in the format provided and no other format is acceptable. If the financial bid format is found to be modified by the bidder, the bid will be rejected.

6.5 The server time (which is displayed on the bidder’s dashboard) will be

considered as the standard time for referencing the deadlines for submission of the bids by the bidders, opening of bids etc. The bidders should follow this time during bid submission.

6.6 The uploaded tender documents become readable only after the tender

opening by the authorized bid openers. 6.7 Upon the successful and timely submission of bids, the portal will give a

successful bid submission message & bid summary will be displayed with the bid no. and the date & time of submission of the bid with all other relevant details.

7. ASSISTANCE TO BIDDERS

7.1 Any queries relating to the tender document and the terms and conditions contained therein should be addressed to the Tender Inviting Authority. For any other tender related queries bidders are requested to contact on below given numbers/email.


Page 15 of 145

EdCIL / Tender Wizard E-Tendering Portal Helpdesk

Telephone/ Mobile

Customer Support:080-49352000 (Multiple Telephone lines) EmergencyMobileNumbers:9686115318/ 9650520101/8800445981. (Please contact in case of emergency during non-working hours.)

E-mail ID To Tender Wizard [email protected] [email protected] [email protected] [email protected] & cc to: [email protected]

8. Offline Submissions: (AS PER TENDER REQUIREMENT)

8.1 The bidder is requested to submit the following documents in a Sealed Envelope to the above-mentioned address (given in EOI) before the start of Public Online Tender Opening Event.

1. Original copy of the power-of-attorney wherever applicable.

Note: The Bidder should also upload the scanned copies of all the

above-mentioned original documents as Bid-Annexure during Online Bid-Submission.

8.2 The envelope shall bear (the project name), the tender number along with

the Name of Bidder firm with address and the words ‘DO NOT OPEN BEFORE’ (due date &time).

9. Public Online Tender Opening Event (TOE)

a. Tender Wizard E-Tendering Portal offers a unique facility for ‘Public

Online Tender Opening Event (TOE)’. Tender Opening Officers, as well as, authorized representatives of bidders can simultaneously attend the Public Online Tender Opening Event (TOE) from the comfort of their offices. Alternatively, one/two duly authorized representative(s) of bidders (i.e. Supplier organization) are requested to carry a Laptop with Wireless Internet Connectivity, if they wish to come to Buyer Organization for the Public Online TOE.

b. Every legal requirement for a transparent and secure ‘Public Online Tender Opening Event (TOE)’, including digital counter-signing of each opened bid by the authorized TOE-officer(s). Simultaneous online presence of the Participating bidders’ representatives for TOE has been implemented on Tender Wizard E-Tendering Portal.







Page 16 of 145

c. Tender Wizard E-Tendering Portal has a unique facility of ‘Online Comparison Chart’ which is dynamically updated as each online bid is opened. The format of the chart is based on inputs provided by the Buyer for each Bid-Package of a tender. The information in the Comparison Chart is based on the data submitted by the Bidders. A detailed Technical and / or Financial Comparison Chart enhance Transparency.

d. Tender Wizard E-Tendering Portal has a unique facility of a detailed

report titled ‘Minutes of Online Tender Opening Event (TOE)’ covering all important activities of ‘Online Tender Opening Event (TOE)’. This is available to all Participating bidders for ‘Viewing/Downloading’.

10. CRITICAL DO’S AND DON’TS FOR BIDDERS

Specifically, for Supplier organizations, the following ‘SEVEN KEY INSTRUCTIONS for BIDDERS' must be assiduously adhered to:

I. Obtain individual Digital Signing Certificate (DSC or DC) well in

advance of your first tender submission deadline on Tender Wizard E-Tendering Portal.

II. Register your organization on Tender Wizard E-Tendering Portal well

in advance of the important deadlines for your first tender on Tender Wizard E-Tendering Portal viz. ‘Date and Time of Closure of Procurement of Tender Documents’ and ‘Last Date and Time of Receipt of Bids’. Please note that even after acceptance of your registration by the Service Provider, to respond to a tender you will also require time to complete activities related to your organization, such as creation of- Marketing Authority (MA) [i.e. a department within the Supplier/ Bidder Organization responsible for responding to tenders], users for one or more such MAs, assigning roles to them, etc. It is mandatory to create at least one MA. This unique feature of creating an MA enhances security and accountability within the Supplier/ Bidder Organization.

III. Get your organization's concerned executives trained on Tender Wizard

E-Tendering Portal well in advance of your first tender submission deadline on the Portal.

IV. For responding to any Particular tender, the tender (i.e. its Tender Search Code or Tender No) has to be assigned to an MA. Further, an ‘Official Copy of Tender Documents’ should be procured/ downloaded before the expiry of Date and Time of Closure of Procurement of Tender Documents.

Note: Official copy of Tender Documents is distinct from downloading ‘Free Copy of Tender Documents’. Official copy of Tender Documents is the equivalent of procuring physical copy of Tender Documents with official receipt in the paper-based manual tendering system.

V. Submit your bids well in advance of tender submission deadline on

Tender Wizard E-Tendering Portal (There could be last minute problems


Page 17 of 145

due to internet timeout, breakdown, etc.)

VI. Tender Wizard E-Tendering Portal will make your bid available for opening during the Online Public Tender Opening Event (TOE) ‘ONLYIF’ your ‘Status pertaining Overall Bid-Submission’ is ‘Complete’. For your record, you can generate and save a copy of ‘Final Submission Receipt’. This receipt can be generated from 'Bid-Submission Overview Page' only if the ‘Status pertaining overall Bid-Submission’ is ‘Complete’.

11. MINIMUM REQUIREMENTS AT BIDDER’S END

• Computer System having configuration with minimum Windows 7 or

above, and Broadband connectivity

• Digital Certificate(s)

Note:

I. The Bid shall be typed in English and signed by the Bidder or a person

duly authorized to bind the Bidder to the Contract. The person(s)

signing the Bids shall initial all pages of the Bids.

II. All envelopes should be securely sealed and stamped.

III. It is mandatory for the Bidder to quote for all the items mentioned in the tender.


Page 18 of 145

CHAPTER-V

INSTRUCTIONS TO BIDDERS

1. SCOPE OF WORK:

i. The proposal is that the selected Agency will have to Set up the Integrated Maths & Science Rooms in 525 schools of Jharkhand. The supply & installation as required by the EDCIL and specified in this tender document shall be carried out by the Agency and EDCIL shall release payments against the supply, installation and maintenance for 3 years as prescribed in Bid document. The Agency will be responsible for smooth supply & installation of all materials at respective Schools. The agency also provides one manpower in every 10 schools. The cost of manpower will be borne by the on boarded agency for 3 years.

ii. The pre-delivery inspection shall be undertaken as per directions of the EdCIL/EdCIL’s Client. In case of any material found not as per specifications, the same would be rejected & no claim would be accepted by EdCIL/EdCIL’s Client, for any loss incurred to the bidder. The supplier has to replace the sub-standard material within seven days of written notice from the Authority as per the approved specification for no extra cost. No liability shall be accepted by EdCIL in this regard. In case the rejection is more than 5% of the ordered quantity the supplier order shall be cancelled.

iii. The bidder should set-up one complete Integrated Math & Science

Rooms for demonstration purpose (as sample) at a designated place in Jharkhand as per specification prescribed in the tender document along with the EOI/as directed by EdCIL.

iv. The successful bidder shall not sub-let the supply order or the Package

of it, for any other supplier without prior approval of EdCIL.

v. In case of any dispute regarding specifications, the decision of the EdCIL/EdCIL’s Client shall be final.

2. Due date: The EOI has to be submitted before the due date & time as mentioned in the EOI or any later notification.

3. Preparation of EOI: The offer/ EOI shall be submitted in Single packet system (i.e.) Technical cum Financial EOI. The technical bid shall consist of all technical details along with commercial terms and conditions. Financial bid shall indicate item wise rate for the items mentioned in the technical bid in the given PDF format.

4. Bid Security (Earnest Money Deposit)

The bidders shall sign a Bid Security Declaration (as per format given in EOI / Client’s tender document) accepting that if they withdraw or modify their bids during the period of validity etc., they will be suspended for the time specified in the EOI document. The Performa for bid security is attached at Annexure-XIV.


Page 19 of 145

5. Acceptance/ Rejection of EOI:

EdCIL reserves the right to reject any or all offers without assigning any reason. EdCIL based on the requirement without assigning any reason to the Bidder/s may split work/Scope/EOI offer in stages or in Packages according to the need of work or for ease of execution of work. EdCIL reserves right to take decision according to requirement and no claim on whatsoever ground shall be entertained from the bidder. Final decision of EdCIL shall be binding on the bidder.

6. Procedure for Bidding:

The bid shall be submitted in Single Packet for any or all of the packages i.e. Package A (MINI SCIENCE CENTER), Package B (SCIENCE KITS & Charts) and Package C (MATHEMATICS KITS & various Charts) The Evaluation of the EOI shall be undertaken independently for Package A, Package B and Package C and the lowest of the each Package shall be considered for evaluation and for further processing.

7. Pre-Qualification Criteria:

In case the bidder is participating in one or more than one packages the following has to be determined:

a. For participation in one package – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 8 Crore.

b. For participation in two packages – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 15 Crore.

c. For participation in all three packages – Total turnover of the bidder during last three financial years (2018-2019, 2019-20 & 2020-21) should be minimum Rs. 25 Crore.

The PQ criteria shall be as follows:

7.1 PQ for Package A (MINI SCIENCE CENTER)

S. No. PQ CRITERIA Supporting Documents

required

I. The bidder must be a Company/Ltd. Or Pvt. Ltd./LLP/Partnership/Proprietorship registered with Statutory Proprietary Authorities in India for the last five years from the date of EOI.

Copy of certificate of incorporation/ any other legally valid supporting document

II. Only authorized dealer/ agency of Original Equipment Manufacturer (OEM) or any company having minimum 5 years of

Latest Authorization letter from OEM to the Bidder authorizing him to do


Page 20 of 145

experience in execution of such supplies and installation should apply against this invitation for tender. The bidder, offering to the supply of items under the bid, which the bidder does not manufacture or otherwise produce, the bidder has to provide Manufacturer’s Authorization Certificate preferably as per format at Annexure XI. Bids submitted without authorization certificate will be summarily rejected. Authorization certificate from OEM is essential for supply under scope of work.

business on OEM’s behalf for supplies and services mentioned in this tender, as associate or authorized business Partner, for OEM’s Manufactured Items. In case of OEM Participating as a bidder, a power of attorney issued by the company’s Director/ Board of Directors in favour of the authorized signatory for this tender to be submitted along with the bid.

III. The total annual turnover of the bidder firm should be minimum of Rs. 8 Crores (Rs. Eight Crores only) during the last three financial years (2018-2019, 2019-20 & 2020-21). In this regard, the bidder should submit copies of audited Balance sheets including profit and loss accounts for the last three financial years as above. The agency should have positive profit for all 3 years. A registered CA’s certificate indicating turnover statement for the relevant period is also to be accompanied.

Certificate from the Chartered Accountant or a duly self attested by the bidder’s authorized signatory. Copy of audited balance sheets/P&L Accounts for the relevant years.

IV. Authorized agency/ OEM must have successfully executed (during the last five completed financial year (2017-18, 2018-19, 2019-20, 2020-21,2021-22) at least one or more supply, installation of Set up of Integrated Maths & Science Rooms/ Laboratory Items or Similar# orders from start to finish of the following: One single order of Supply and Installation of Laboratory Items having value of Rs 6.4 Crore (Rs. Six Crore Forty Lakhs)

(OR) Two orders of Supply and Installation of Laboratory Items having value of Rs. 4.8 Crore (Rs. Four Crore Eighty lakh)

(OR) Three orders of Supply and Installation of Laboratory Items having value of Rs. 3.2 Crore (Rs. Three Crore twenty Lakhs)

Copies of work orders and completion/ Installation certificates. In case of non-availability of completion, final bill copy submitted by the bidder to the client can be submitted as proof of completion of work/ Installation.

V. At Least One Order of value of Rs. 3.2 Crore should be for Set up of Integrated Maths & Science Rooms / Laboratory Items or similar# to Central Govt./ State

Copies of work orders and completion/ Installation certificates. In case of non-availability of completion, final


Page 21 of 145

Govt./ PSU’s/ Autonomous bodies/ Govt. Premier Institutions such as IIT’s/ NIT’s/ IIIT’s/ Central Universities/ Govt. Institutions/ Government schools etc. during last five years.

bill copy submitted by the bidder to the client can be submitted as proof of completion of work/ Installation.

7.2 PQ for Package B (SCIENCE KITS & charts)


required



II. Only authorized dealer/ agency of Original Equipment Manufacturer (OEM) or any company having minimum 5 years of experience in execution of such supplies and installation should apply against this invitation for tender. The bidder, offering to the supply of items under the bid, which the bidder does not manufacture or otherwise produce, the bidder has to provide Manufacturer’s Authorization Certificate preferably as per format at Annexure XI. Bids submitted without authorization certificate will be summarily rejected. Authorization certificate from OEM is essential for supply under scope of work.

Latest Authorization letter from OEM to the Bidder authorizing him to do business on OEM’s behalf for supplies and services mentioned in this tender, as associate or authorized business Partner, for OEM’s Manufactured Items. In case of OEM Participating as a bidder, a power of attorney issued by the company’s Director/ Board of Directors in favour of the authorized signatory for this tender to be submitted along with the bid.



IV. Authorized agency/ OEM must have successfully executed (during the last five completed financial year (2017-18, 2018-19,

Copies of work orders and completion/ Installation certificates. In case of non-


Page 22 of 145

2019-20, 2020-21,2021-22) at least one or more supply, installation of Set up of Integrated Maths & Science Rooms/ Laboratory Items or Similar# orders from start to finish of the following: One single order of Supply and Installation of Laboratory Items having value of Rs 6.4 Crore (Rs. Six Crore Forty Lakhs)



availability of completion, final bill copy submitted by the bidder to the client can be submitted as proof of completion of work/ Installation.

V. At Least One Order of value of Rs. 3.2 Crore should be for Set up of Integrated Maths & Science Rooms / Laboratory Items or similar# to Central Govt./ State Govt./ PSU’s/ Autonomous bodies/ Govt. Premier Institutions such as IIT’s/ NIT’s/ IIIT’s/ Central Universities/ Govt. Institutions/ Government schools etc. during last five years.


7.3 PQ for Package C (MATHEMATICS KITS & various Charts)


required



II. Only authorized dealer/ agency of Original Equipment Manufacturer (OEM) or any company having minimum 5 years of experience in execution of such supplies and installation should apply against this invitation for tender. The bidder, offering to the supply of items under the bid, which the bidder does not manufacture or otherwise produce, the bidder has to provide Manufacturer’s Authorization Certificate preferably as per format at Annexure XI. Bids submitted without authorization

Latest Authorization letter from OEM to the Bidder authorizing him to do business on OEM’s behalf for supplies and services mentioned in this tender, as associate or authorized business Partner, for OEM’s Manufactured Items. In case of OEM Participating as a bidder, a power of attorney issued by the


Page 23 of 145

certificate will be summarily rejected. Authorization certificate from OEM is essential for supply under scope of work.

company’s Director/ Board of Directors in favour of the authorized signatory for this tender to be submitted along with the bid.



IV. Authorized agency/ OEM must have successfully executed (during the last five completed financial year (2017-18, 2018-19, 2019-20, 2020-21,2021-22) at least one or more supply, installation of Set up of Integrated Maths & Science Rooms/ Laboratory Items or Similar# orders from start to finish of the following: One single order of Supply and Installation of Laboratory Items having value of Rs 6.4 Crore (Rs. Six Crore Forty Lakhs)




V. At Least One Order of value of Rs. 3.2 Crore should be for Set up of Integrated Maths & Science Rooms / Laboratory Items or similar# to Central Govt./ State Govt./ PSU’s/ Autonomous bodies/ Govt. Premier Institutions such as IIT’s/ NIT’s/ IIIT’s/ Central Universities/ Govt. Institutions/ Government schools etc. during last five years.


#Similar work means the project related to Science (Physics, Chemistry, Biology), and Maths, Technology etc. Notwithstanding anything stated above, the Consignee/ EdCIL reserves the right to assess bidder’s capability and capacity to perform the contract, should circumstances warrant such an assessment in the overall interest of the work by EdCIL/ EdCIL’s Client.


Page 24 of 145

8. Performance Security:

The successful bidder shall issue undertaking on a Non-Judicial Stamp Paper to submit back-to-back PBG as submitted by EdCIL to the end client in case of award of work to EdCIL. The Performance Security amount shall be @3% of the bid amount finalized by EdCIL. Additional 3% Performance Security shall be deducted as security deposit from each running bill in case of award of work. This shall be released after 90 days of the Defect Liability Period.

9. Delivery Schedule:

The delivery of all the items specified in the BOQ should be completed within 120 days of issuance of LOA (Letter of Acceptance) to each of the School. The bidder to ensure timely supply of the material to each of the School as specified above. In case of failure, the liquidated damages shall be imposed and the same shall be recovered from the bills/dues. In case of any delay beyond the purview of the bidder the same to be brought to the notice of EdCIL in writing. Such request would be made by the bidder before the last date of supply. EdCIL resolves the right to accept/reject the request with/without liquidated damages.

10. Payment Terms:

a) 75% of the total cost of the project quoted will be paid bill wise on submission of bills after successful supply. 10% will be paid after installation in accordance with the direction.

b) Remaining 15% will be paid as mentioned in the warranty clause 11 c) Payment will be made on submission of bill in proper form by the bidder to

the EDCIL. All remittance charges will be borne by the bidder. d) GSTIN any other taxes led by Central/State Government will be deducted

at source as per rules.

11. Warranty:

I. The bidder shall provide a warranty for twelve months from the date of installation for manufacturing defect. This shall not be applicable for theft, physical damage, short- circuit, fire or any natural disaster. Whereas the bidder shall provide maintenance services for period of 3 years from the date of installation. After completion of services for every 6 months, 2.5% amount of cost of project will be released upto 3 years.

II. The Supplier should, in addition, comply with the performance and/or consumption guarantees specified under the contract. If for reasons attributable to the Supplier, these guarantees are not attained in whole or in Package, the Supplier should at its discretion make such changes, modifications, and/or additions to the Goods or any Package thereof as shall be necessary in order to attain the contractual guarantees specified in the Contract at its own cost and expense and to carry out further performance tests.


Page 25 of 145

III. The warranty should be comprehensive on site with responsibility of the

agency to ensure attending the warranty queries/issues received from JHARKHAND. Supplier should give written information (about the Engineers/ technical representative name and cell numbers) before handing over of the Goods to the Consignee and to the end client’s nominated representative/s to attend the issues related to the warranty of the goods supplied under the contract.

IV. The Consignee should promptly notify the Supplier in writing of any claims

arising under this warranty. Upon receipt of such notice, the Supplier should immediately within 02 days arrange to repair or replace the defective goods or Packages thereof free of cost at the ultimate destination. The Supplier should take over the replaced Packages/goods at the time of their replacement. No claim whatsoever should lie on the Consignee for the replaced Packages/goods thereafter. The period for correction of defects in the warranty period is 02 days. If the supplier having been notified fails to remedy the defects within 02 days, the consignee should proceed to take such remedial action as should be necessary, at the supplier’s risk and expenses and without prejudice to any other rights, which the consignee should have against the supplier under the contract.

12. Responsibilities of Purchaser & Bidder: a) EDCIL /Purchaser:

i) The EDCIL will provide list of Integrated Math & Science Rooms to be established along with contact details.

ii) According to the list given by the EDCIL/Authorities of Jharkhand Govt., will allot a room/s without furniture having minimum 180sq.ft. RCC/Waterproofing with minimum one electrical switch board in working condition. The expansion of cable etc. within the room will be done by the bidder itself at his own cost.

iii) The committee appointed by the Authorities of Jharkhand Govt. will inspect/verify the established Integrated Math & Science Rooms by the Bidder.

iv) EDCIL will release remaining 10% payment to the Bidder on installation and remaining 15% payment as per warranty clause 11.

b) Bidder: a. The Bidder shall follow the distribution chart & establish the Integrated

Math & Science Rooms as per the specification to the location in timely manner.

b. Installation shall consist of needed table, charts, training manual & QR coded videos, cupboards, all models in working condition & all smaller kits neatly labeled & stored as specified in the work order such that the center is completely child safe.

c. The Bidder shall collect report of delivery & satisfactory installation from relevant person who is appointed/instructed by Authorities of Jharkhand Govt, Jharkhand.

d. After installation within 90 days, the Bidder shall provide comprehensive training to teachers selected by Authorities of Jharkhand Govt, Jharkhand at district level. Cost for the training bear by the Bidder.

e. The Bidder shall provide twelve months warranty of all the items


Page 26 of 145

supplied by them from the date of installation for manufacturing defect only. This shall not be applicable for theft, physical damage, short-circuit, fire or any natural disaster.

f. Bidder should submit letter or any proof along with undertaking on his letter head for having minimum experience of 1 year in teacher training for science (In support of this clause a supporting document has to be enclosed with the bid).

g. Bidder should have EPF & ESIC Registration Certificate (If Applicable). h. Bidder should have production infrastructural facilities & molds etc. for

the production of tendered items and inspection & quality control facilities/laboratory within the factory premises. Bidder should have a certificate showing that they are a manufacturer (In support of this clause a supporting document has to be enclosed with the bid).

i. The bidder shall have to submit proof of at least one order of “Set up of Integrated Maths & Science Rooms” or similar in Govt. department in any of the financial years 2017-18, 2018-19, 2019-20, 2020-21 & 2021-22 and must be furnished along with the relevant copies with satisfactory report respectively. Bidder should attach proof of past performance. Work Execution Certificates from concerned Department which can prove the eligibility shall be enclosed. If required, EdCIL may use the Bidder’s credentials for its bidding purpose.

j. Details of accreditation, if any, under DOE/any affiliation/recognition by GOI or GOJ (In support of this clause a supporting document has to be enclosed with the bid).

13. Cost of preparation of Bids: The bidder shall be solely responsible for the cost of preparation and submitting the bid. Also, the bidder should include the cost of all expenditure for preparation of bid and no payment shall be made whatsoever.

14. Risk Purchase Clause:

In the event of failure of supply of the items/ goods within the stipulated delivery schedule, the consignee has all the right to purchase the items/ goods from the other source on the total risk of the supplier under risk purchase clause. The decision of EdCIL shall be final and binding to the successful bidder. In case of risk coverage, PBG or any bill value due if any on date shall be recovered for completing the supply and installations. No claim on whatsoever grounds shall be entertained by EdCIL.

15. Packing Instructions: Each package will be marked on three sides with proper paint/ indelible ink, the following:

i. Item Nomenclature ii. Order/Contract No. iii. Country of Origin of Goods iv. Supplier’s Name and Address v. Consignee details vi. Packing list reference number vii. All packing should be strong enough to withstand rough handling during

loading, unloading and transporting. Fragile articles should be packed with special precaution and should bear the marking like Fragile, handle with care, This side up etc. All delicate surfaces of items/ goods should be carefully protected and painted with protective paint/


Page 27 of 145

compound and wrapped to prevent rusting and damage.

viii. Attachments and spare Packages and all small pieces should be packed with adequate protections and wherever possible should be sent along with the major items. Each item should be tagged so as to identify it with the main item and Package number and reference number should be indicated.

ix. All protection and threaded fittings should be suitably protected and covers should block the openings.

16. Unloading and Unpacking: Unless specified otherwise in the purchase order, Unloading and storage of the same at the designated place should be undertaken by the supplier. The Unpacking of the materials should also be arranged by Supplier.

17. Delivery Documents:

Till the consignee takes over/ receives the items/ goods, the supplier should be responsible for transportation and to keep the same in safe custody and the charges (if any) to be borne by the supplier. The supplier should mail the following documents to the consignee:

1. 3 Copies of the Supplier invoice showing contract number, goods 'description, quantity unit rate, total amount;

2. Acknowledgment of receipt of goods from the consignee(s) by the transporter;

3. Manufacturer's/ Supplier's warranty certificate, wherever applicable; The above documents should be received by the Consignee before arrival of the Goods (except where the Goods have been delivered directly to the Consignee with all documents) and, if not received, the Supplier will be responsible for any consequent expenses.

18. Delayed Delivery:

i. If the delivery is not made within the due date for any reason under the control of the successful bidder, the EdCIL reserves the right to impose Liquidated damages (LD) @ 5% per week of the value of delayed supply beyond the specific period of 120 (One Hundred Twenty) days from the date of work order.

ii. In case of any condition beyond the control of supplier, the supplier should request the EdCIL to extend the time limit. This request shall be entertained before the due date of supply only. The EdCIL reserves the right to extend the supply period with/without LD or to reject the application on insufficient grounds.

19. Inspection and Tests:

19.1Submission of samples: -

a) The bidder should submit one fully set-up Integrated Math & Science Rooms for Schools as per specification prescribed in the tender document and at the place allotted within the period mentioned in the bid document. The bidder should give live demonstration of all samples to the inspection committee appointed by Authorities of Govt. of Jharkhand. The place for setting up of Integrated Math & Science Rooms will be made available only after submission of DD of


Page 28 of 145

Rs.1.00 Lakh (Non-refundable) drawn on any nationalized/scheduled bank in favor of EDCIL India Limited payable at Noida, towards the expenses for sample testing/verification.

b) The bidder shall also provide training material as well as provide videos CD of teacher training covering all the concepts of all the items (excluding charts in Hindi Language) within the period mentioned in bid document.

c) Failing this will cause a rejection of bid as non-responsive

19.2 Evaluation of Samples:-

a) The committee of experts appointed by Authorities of Govt.

of, Jharkhand shall evaluate the samples submitted by the

prospective bidders.

b) The committee will verify the samples are working & as per

the specification prescribed in the tender document.

c) All the bidders, who have submitted the samples; have

to give orientation session to the committee for the

evaluation of the samples.

d) Evaluation report result of the committee for the samples

submitted by the bidder will be final & applicable for all the

bidders for technical qualification in bid.

Note: The satisfactory report of expert committee is

necessary for bidders to qualify in technical scrutiny.

i. EdCIL reserves the right to inspect the goods and equipment before shipment at supplier’s plant/ warehouse to check whether the goods/ equipment are in conformity with the technical specifications as mentioned in tender BOQ.

ii. The acceptance test (if required) will be conducted by the Consignee, their consultant or other such person nominated by the Consignee at its option after the item is delivered/ installed at consignee’s site in the presence of supplier’s representatives. The acceptance will involve trouble free operation and ascertaining conformity with the ordered specifications and quality. There should not be any additional charges for carrying out acceptance test. No malfunction, Partial or complete failure of any Package of the item is expected to occur. The Supplier should maintain necessary log in respect of the result of the test to establish to the entire satisfaction of the Consignee, the successful completion of the test specified.

iii. In the event of the ordered item failing to pass the acceptance test, a

period not exceeding one week will be given to rectify the defects and to clear the acceptance test, failing which the Consignee reserve the right to get the item replaced by the Supplier at no extra cost to the Consignee.

iv. Successful conduct and conclusion of the acceptance test for the

installed goods and item should also be the responsibility and at the


Page 29 of 145

cost of the Supplier.

20. Rates:

i. The rate should be quoted in per unit (with breakup) and must include all packing and delivery charges. The offer/ bid should be exclusive of taxes and duties, which will be paid as applicable. However, the percentage of taxes and duties should be clearly indicated. The inter se merit position of the bids however shall be decided based on the composite rate of the product including taxes, transportation, Warranty with all other incidental expenses indicated.

ii. The rates must be quoted in the Performa given in Financial Bid failing which the Bid would be treated as unresponsive. Any discount or any other offers affecting the package rate must be mentioned in Financial Bid only. Discount or any other offers affecting the Package rate mentioned at any other place of the bid other that Financial Bid will not be considered.

21. Notices: For the purpose of all notices, the following should be the address :

Consignee: The Project Manager, EdCIL India Ltd., Camp office, JHARKHAND, On Behalf of EdCIL (India) Limited, 18 A, Sector-16A, Noida-201 301 Tel: 91-120-2512001 to 2512006 Supplier: (To be filled in by the supplier)

22. Resolution of Disputes: The dispute resolution mechanism to be applied

pursuant should be as follows:

i. In case of Dispute or difference arising between the Consignee and a domestic supplier relating to any matter arising out of or connected with this agreement, such disputes or difference should be settled in accordance with the Indian Arbitration &Conciliation Act, 1996, the rules there under and any statutory modifications or re-enactments thereof should apply to the arbitration proceedings.

ii. The dispute should be referred to the Competent Authority, EdCIL and

if he/she is unable or unwilling to act, to the sole arbitration of some other person appointed by him willing to act as such Arbitrator. The award of the arbitrator so appointed should be final, conclusive and binding on all Parties to this order.

iii. In the case of a dispute between the consignee and a Foreign

Supplier, the dispute should be settled by arbitration in accordance with provision of sub-clause (i) & (ii) above. But if this is not acceptable to the supplier then the dispute should be settled in


Page 30 of 145

accordance with provisions of UNCITRAL (United Nations Commission on International Trade Law) Arbitration Rules.

iv. The venue of the arbitration should be the place from where the order

is issued. 23. Right to Use Defective Goods

i. If after delivery, acceptance and installation and within the guarantee and warranty period, the operation or use of the goods proves to be unsatisfactory, the Consignee should have the right to continue to operate or use such goods until rectifications of defects, errors or omissions by repair or by Partial or complete replacement is made without interfering with the Consignee’s operation.

ii. Replacement of Goods broken, damaged or short: In the event of any

material or Package thereof found broken or damaged or received short during transit or during installation or Commissioning or testing at site, before commissioning in service the suppliers should replace the same free of cost. However, School/ EdCIL will recover amount equivalent to the cost of such damaged / broken / short supplied materials and will repay when actual replacement is given.

iii. Substitution and Wrong Supplies: Unauthorized substitution or

materials delivered in error of wrong description or quality or supplied in excess quantity or rejected goods should be returned to the supplier at their own cost and risk.

24. Supplier Integrity

The Supplier is responsible for and obliged to conduct all contracted activities in accordance with the Contract using state of the art methods and economic principles and exercising all means available to achieve the performance specified in the contract.

25. Training and demonstration

The Supplier is required to provide training to the designated Consignee’s technical and end user personnel to enable them to effectively operate the total item.

The supplier is required to undertake the demonstration of the items within 15 days of the arrival of materials at School.

26. Insurance

I. The Supplier should make all arrangements towards safe and complete delivery at School. Such responsibility on Package of the supplier will include taking necessary transit insurance and erection policy, freight, octroi, state level permits etc. as applicable on the items of this tender.

II. It is the total responsibility of supplier to complete all formalities to transit


Page 31 of 145

of goods from the place of dispatch to School.

III. The transportation of goods through unregistered common carrier is illegal. The bidder should ensure to comply the carriage by latest Road Act and any other relevant.

IV. The supplier will keep EdCIL informed about various stages of deliveries

& installation.

27. Incidental Services: The incidental services also include:

I. Furnishing of 01 set of detailed operations & maintenance manual.

II. Arranging the shifting/moving of the item to their location of final installation at the cost of Supplier through their Indian representatives.

28. Force Majeure:

The Supplier should not be liable for forfeiture of its performance security, liquidated damages or termination for default, if and to the extent that, it’s delay in performance or other failure to perform its obligations under the Contract is the result of an event of Force Majeure.

• For purposes of this Clause, "Force Majeure" means an event beyond the control of the Supplier and not involving the Supplier's fault or negligence and not foreseeable. Such events shall include, but are not limited to, acts of the Consignee either in its sovereign or contractual capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and freight embargoes.

• If a Force Majeure situation arises, the Supplier should promptly notify the Consignee in writing of such conditions and the cause thereof. Unless otherwise directed by the Consignee in writing, the Supplier shall continue to perform its obligations under the Contract as far as is reasonably practical, and should seek all reasonable alternative means for performance not prevented by the Force Majeure event.

29. Governing Language

The contract should be written in English language. English language version of the Contract should govern its interpretation. All correspondence and other documents pertaining to the Contract, which are exchanged by the Parties, should be written in the same language.

30. Applicable Law

The Contract should be interpreted in accordance with the laws of the Union of India and all disputes should be subject to place of jurisdiction.

31. Notices

• Any notice given by one Party to the other pursuant to this contract/order should be sent to the other Party in writing or FAX or e mail and


Page 32 of 145

confirmed in writing to the other Party’s address.

• A notice should be effective when delivered or on the notice’s effective date, whichever is later.

32. Taxes

Suppliers should be entirely responsible for all taxes, duties, license fees,

octroi, road permits, etc., incurred until delivery of the contracted Goods to the

Consignee/ School. EdCIL shall not make any payment towards any taxes or

any other incidental charges payable by the supplier for supply of material up

to the place of delivery.

33. User list: Brochure/ documents in printed form duly signed and stamped

detailing technical specifications and performance, list of industrial and educational establishments where the items have been supplied must be provided.

34. Manuals and Drawings

I. At the time of goods and items are taken over by the Consignee/ client,

the Supplier should provide the operation and maintenance manuals. These should be in such details as will enable the Consignee to operate, maintain, adjust and repair all Packages of the works as stated in the specifications.

II. The Manuals should be in English language in such form and numbers as stated in the contract.

III. Unless and otherwise agreed, the goods/ items should not be considered

to be completed for the purpose of taking over until such manuals and drawing have been supplied to the Consignee/Client.

35. Application Specialist: The Tenderer should mention in the Techno-

Commercial bid the availability and names of Application Specialist and Service Engineers in the nearest regional office.

36. Site Preparation:

I. The supplier should visit the Schools and see the site where the items is

to be installed and should offer his advice and render assistance to the Institute in the preparation of the site and other pre-installation requirements.

II. The supplier should inform to the Consignee/Client about the site preparation, if any, needed for the installation of items, immediately after the receipt of the purchase order. The supplier must provide complete details regarding space and all the other infrastructural requirements needed for the items, which the Institute should arrange before the arrival of the items to ensure its timely installation and smooth operation thereafter.


Page 33 of 145

III. School shall be providing electricity for installation of items. However, bidder is advised to make own arrangement/ DG set to avoid any delay.

37. Spare Packages

The Supplier should be required to provide any or all of the following materials, notifications, and information pertaining to spare Packages manufactured or distributed by the Supplier:

I. Such spare Packages as the Consignee/Client should elect to purchase

from the Supplier, providing that this selection should not relieve the Supplier of any warranty obligations under the Contract; and

II. In the event of termination of production of the spare Packages:

• Advance notification to the Consignee/Client of the pending termination, in sufficient time to permit the Consignee to procure needed requirements; and following such termination, furnishing at no cost to the Consignee/Client, the blueprints, drawings and specifications of the spare Packages, if requested.

III. Supplier should carry sufficient inventories to assure ex-stock supply of

consumable spares for the Goods, such as gaskets, plugs, washers, belts etc. Other spare Packages and components should be supplied as promptly as possible but, in any case, within six months of placement of order.

38. Defective supply of items

I. If any of the items supplied by the Tenderer is found to be substandard,

refurbished, un-merchantable or not in accordance with the description/specification or otherwise faulty, the committee will have the right to reject the items or its Package. The rates of such items should be refunded by the Tenderer with 18% interest if such payments for such items have already been made.

II. All damaged or unapproved goods should be returned at suppliers cost

and risk and the incidental expenses incurred thereon should be recovered from the supplier. Defective Package in items, if found before installation and/or during warranty period, should be replaced within 45 days on receipt of the intimation from this office at the cost and risk of supplier including all other charges. In case supplier fails to replace above item as per above terms & conditions, EdCIL INDIA LTD should consider "Banning" the supplier.

39. Termination for Default

The Consignee should, without prejudice to any other remedy for breach of contract, by written notice of default sent to the Supplier, terminate the Contract in whole or Package:

I. If the Supplier fails to deliver any or all of the Goods within the period(s)


Page 34 of 145

specified in the order, or within any extension thereof granted by the Consignee; or

II. If the Supplier fails to perform any other obligation(s) under the Contract. III. If the Supplier, in the judgment of the Consignee has engaged in corrupt

or fraudulent practices in competing for or in executing the Contract.

IV. For the purpose of this Clause:

• “Corrupt practice” means the offering, giving, receiving, or soliciting of anything of value to influence the action of a public official in the procurement process or in contract execution.

• “Fraudulent practice” means a misrepresentation of facts in order to influence a procurement process or the execution of a contract to the detriment of the Borrower, and includes collusive practice among Bidders (prior to or after bid submission) designed to establish bid rates at artificial non-competitive levels and to deprive the Borrower of the benefits of free and open competition;’”

• In the event the Consignee terminates the Contract in whole or in Package, the Consignee should procure, upon such terms and in such manner, as it deems appropriate, Goods or Services similar to those undelivered, and the Supplier should be liable to the Consignee for any excess costs for such similar Goods or Services. However, the Supplier should continue the performance of the Contract to the extent not terminated.

40. Disputes and Jurisdiction: Any legal disputes arising out of any breach of contract pertaining to this tender should be settled in the court of competent jurisdiction located within New Delhi.

41. Compliance: The bidder to comply with the technical specifications as given

in the BOQ.

42. Award of Contract:

I. EdCIL reserves the right to accept or reject any proposal and to annul the bidding process and reject all proposals at any time prior to award of contract, without thereby incurring any liability to the Bidders. In case of annulment, all proposals submitted and specifically, proposal securities shall be promptly returned to the Bidder.

II. EdCIL has the right to review at any time prior to award of contract that the qualification criteria, as specified in Clause: 6 of Chapter: V are still being met by the Bidder whose offer has been determined as first rank. A proposal shall be rejected if the qualification criteria, as specified in Clause: 6 are no longer met by the Bidder whose offer has been determined as first rank.


Page 35 of 145

43. Price Bid Understanding

EdCIL reserves its right to call for price break-up of any or each of item mentioned in BoQ of offer by bidder. This will help to understand the quote and to make EdCIL’s offer competitive.

44. Rates in Figures and Words:

Rates Quoted by the Bidder in tender in figures and words shall be accurately filled in so that there is no discrepancy in the rates written in figures and words. However, if a discrepancy is found, the rates which correspond with the amount worked out by the contractor shall unless otherwise proved be taken as correct. If the amount of an item is not worked out by the contractor or it does not correspond with the rates written either in figures or in words then the rates quoted by the contractor in words shall be taken as correct. Where the rates quoted by the bidder in figures and in words tally but the amount is not worked out correctly, the rates quoted by the Bidder will unless otherwise proved be taken as correct and not the amount. In event no rate has been quoted for any item(s), leaving space both in figure(s), word(s) and amount blank, it will be presumed that the Bidder has included the cost of this/these item(s) in other items and rate for such item(s) will be considered as zero and work will be required to be executed accordingly.

• In the case of any tender where unit rate of any item/items appear unrealistic, such tender / item(s) will be considered as unbalanced and in case the tender is unable to provide satisfactory explanation such a tender/ item(s) is liable to be disqualified and rejected.

45. Certifications: For furniture items, the bidder/ OEM should comply with the

ISO 9001 and 14001 certifications. The certification in this regard should be

enclosed with the bid. In case the bidder has submitted the OEM authorization

for furniture items, the ISO 9001, ISO 14001 certificates from respective OEM

should be enclosed.

46. Acknowledgement: It is hereby acknowledged that bidders have gone

through all the conditions mentioned above and bidders agree to abide by them.

47. Submission of forged documents

Bidders should note that EdCIL may verify authenticity of all the documents/certificate/information submitted by them against the EOI. In case at any stage of this process, if it is established that bidder has submitted forged documents/certificates/information towards fulfillment of any of the EOI/contract conditions, EdCIL shall immediately reject the bid of such bidder(s) or cancel/terminate the contract and forfeit bid security / Performance Security submitted by the bidder and debar them from Participation in future tenders of EdCIL for two years.

48. The bidder must ensure that their bid is complete in all respects and conforms


Page 36 of 145

to EOI terms and conditions, EOI specifications etc. including client specifications, failing which the bids are liable to be rejected without seeking any clarifications on any exception/deviation taken by the bidder in their bid.

49. Restrictions on procurement from a bidder of a country which shares a

land border with India

Bidders shall submit the following certificate for sourcing products and services in tender "We have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. We certify that bidder M/s (name of the bidder) is not from such a country or if from such a country, has been registered with the Competent Authority. We hereby certify that bidder M/s. (Name of bidder) fulfills all the requirement in this regard and is eligible to be considered against this EOI. The bidder will not source those products & services whose beneficial owner is from such countries "

[wherever applicable the bidder must submit evidence of valid registration by Competent Authority]

50. Guidelines for eligibility of a Bidder from a country which shares a land border with India:

As per Order dated 23.07.2020, issued by Department of Expenditure, Ministry of Finance, Govt, of India in this regard, the following guidelines have been issued by DoE for tenders:-

1. Any bidder from a country which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. Competent Authority for the purpose of registration shall be the Registration Committee constituted by the Department for Promotion of Industry and Internal Trade (DPIIT), as mentioned under Annex I of the Order (Public Procurement No.1) dated 23.07.2020.

2. "Bidder'' (including the term 'tenderer', 'consultant' or 'service provider' in

certain contexts) means any person or firm or company, including any member of a consortium or joint venture (that is an association of several persons, or firms or companies), every artificial juridical person not falling in any of the descriptions of bidders stated hereinbefore, including any agency, branch or office controlled by such person, Participating in a procurement process.

3. "Bidder from a country which-shares a land border with India" for the

purpose of this Order means; -

i. An entity incorporated, established or registered in such a country; or


Page 37 of 145

ii. A subsidiary of an entity incorporated, established or registered in

such a country; or

iii. An entity substantially controlled through entities incorporated, established or registered in such a country; or

iv. An entity whose beneficial owner is situated in such a country; or

v. An Indian (or other) agent of such an entity; or

vi. A natural person who is a citizen of such a country; or

vii. A consortium or joint venture where any member of the consortium or joint venture falls under any of the above.

4. The beneficial owner for the purpose of (3) above will be as under:-

i. In case of a company or Limited Liability Partnership, the beneficial

owner is the natural person(s), who, whether acting alone or together, or through one or more juridical person (s), has a controlling ownership interest or who exercises control through other means.

Explanation-

a. "Controlling ownership interest" means ownership of or entitlement to, more than twenty-five per cent, of shares or capital or profits of the company;

b. "Control" shall include the right to appoint majority of the directors or to control the management or policy decisions including by virtue of their shareholding or management rights or shareholders agreements or voting agreements;

ii. In case of a Partnership firm, the beneficial owner is the natural person) who, whether acting alone or together, or through one or more juridical person, has ownership of entitlement to more than fifteen percent of capital or profits of the Partnership;

iii. In case of an unincorporated association or body of individuals, the

beneficial owner is the natural person(s), who, whether acting alone or together, or through one or more juridical person, has ownership of or entitlement to more than fifteen percent of the property or capital or profits of such association or body of individuals;

iv. Where no natural person is identified under (i) or (ii) or (iii) above,

the beneficial owner is the relevant natural person who holds the position of senior managing official;

v. In case of a trust, the identification of beneficial owner(s) shall

include identification of the author of the trust, the trustee, the beneficiaries with fifteen percent or more interest in the trust and any other natural person exercising ultimate effective control over the trust through a chain of control or ownership.


Page 38 of 145

vi. An Agent is a person employed to do any act for another, or to represent another in dealings with third person.

51. Repeat /Add-On Order

i. In exceptional situation where the requirement is of an emergent nature,

the purchaser reserves the right to place repeat order up to 50% of the

value of goods and services contained in the running tender/contract

within a period of twelve months from the date of commissioning/

commercialization of the project (date of acceptance of APO of the

items procured in case where no installation, commissioning is involved)

at the same rate or a rate negotiated (downwardly) with the existing

venders considering the reasonability of rates based on prevailing

market conditions and the impact of reduction in duties and taxes etc.

ii. Further if required, an additional order for 50% of the value of the goods

& services limited to 100% of the value of goods and services contained

in the running tender/contract may be placed within a period of twelve

months from the date of commissioning/ commercialization of the

project (date of acceptance of APO of the items procured in case where

no installation, commissioning is involved) on the existing vendors at the

same rate or a rate negotiated (downwardly) considering the

reasonability of rates based on prevailing market conditions and the

impact of reduction in duties and taxes etc.(with due approval of the

Board).

Add-On order upto 50% quantity shall be placed with approval of concerned Director and Add-On order for more than 50% quantity shall be placed with approval of CMD EdCIL.


Page 39 of 145

CHAPTER VI ANNEXURE-I

<< Bidder’s Organization Letter Head >>

DECLARATION SHEET

We, hereby certify that all the information and data furnished by our organization with regard to this tender specification are true and complete to the best of our knowledge. I have gone through the specification, conditions and stipulations in details and agree to comply with the requirements and intent of specification. This is certified that our organization has been authorized (Copy attached) by the OEM to Participate in Tender. We further certified that our organization meets all the conditions of eligibility criteria laid down in this tender document. Moreover, OEM has agreed to support on regular basis with technology / product updates and extend support for the warranty. The rates quoted in the financial bids are subsidized due to academic discount given to EdCIL INDIA LTD.

We, further specifically certify that our organization has not been Black Listed/ De Listed or put to any Holiday by any Institutional Agency/ Govt. Department/ Public Sector Undertaking in the last three years.

NAME & ADDRESS OF THE Vendor/ Manufacturer/ Agent

1 Phone

2 Fax

3 E-mail

4 Contact Person Name

5 Mobile Number

6 TIN Number

7 PAN Number

8. Valid EPF Registration Certificate.

9. Valid ESIC Registration Certificate.

(In case of on-line payment of Tender Fees) 10 UTR No. (For Tender Fee)


Page 40 of 145

(In case of on-line payment of EMD) 11UTR No. (For EMD)

12 Kindly provide bank details of the bidder in the following format: a) Name of the Bank

b) Account Number

C) Kindly attach scanned copy of one Cheque book page to enable us to return the EMD to unsuccessful bidder

d)

13. MSME Status

(Signature of the Tenderer)

Name: _________________

Seal of the Company


Page 41 of 145

Annexure II LETTER OF UNDERTAKING

(ON THE LETTER HEAD OF THE BIDDER) To Chief General Manager (EIS & EPS) EdCIL (India) Limited (EdCIL) EdCIL House, 18 A, Sector-16 A, NOIDA – 201301 (U.P.), India Sir,

SUBJECT- EOI for Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by Authorities of JHARKHAND Govt. For Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance

This bears reference to EdCIL NIT No. EdCIL/EIS & EPS/PROC/JHARKHAND/2022-23/02 Dated 29.04.2022. We, hereby, accept all the terms and conditions for submitting bid as mentioned in this Bid Document. We hereby certify that no terms and conditions have been stipulated by us in the

Financial Bid.

We warrant that the services do not violate or infringe upon any patent, copyright, trade secret or other property right of any other person or other entity. We agree that we shall not prevent EdCIL from any claim or demand, action or proceeding, directly or indirectly resulting from or arising out of any breach or alleged breach of any of the terms & conditions of bid document and contract. The above document is executed on ___/___/2022 at (place) ________ and we accept that if anything out of the information provided by us is found wrong, our bid/ work order shall be liable for rejection. Thanking you, Yours faithfully,

Name of the Bidder____________

Authorized Signatory____________

Seal of the Organization____________

Date: Place:


Page 42 of 145

ANNEXURE III

UNDERTAKING This is to confirm that we M/s ____________________ (give full address) have not been declared neither failed to perform on any Agreement, nor have been expelled from any project or Agreement nor any Agreement terminated for breach by the us (Agency) in any of the government department and public sector undertaking /enterprise or by any other Client in India, in last five year before release of advertisement.

If the above information found false at any stage after the placement of Work Order / Agreement, EdCIL (India) Limited (Ed.CIL), 18-A, Sector 16-A, Noida will have full right to cancel the Contact and forfeit the Performance Guarantee. All the direct and indirect cost related to the cancellation of the order will be borne by us besides any legal action by Ed.CIL which shall be deemed fit at that point of time.

Authorized Signatory Note: The undertaking regarding the non-blacklisting of firm is to be submitted on a non-judicial stamp paper of Rs. 100/- (Rupees Hundred only).


Page 43 of 145

ANNEXURE IV

Annual Turn Over: -

Sl. No. Financial Year Annual Turn over

1. 2018-19

2. 2019-20

3. 2020-21

Total turnover of past three F.Y.

Note: Certificate from Statutory Auditor/ Charted Accountant certifying balance sheet

only for all three years to be attached.


Page 44 of 145

ANNEXURE-V Details of Projects Completed During Last 5 years

Name of the Firm:

S. No.

Name of the Projects

Order No. & Date

Description & Quantity of

ordered items

Value of Order

Date of Start

Scheduled Date of

Completion

Actual Date of Completion

Reason for Delay,

if any

1.

2.

3.

4.

5.

6.

7.

Signature with Seal


Page 45 of 145

ANNEXURE-VI

List of Order executed for Govt. Organization/ Department/ University/ Govt. Schools:

List of Organizations for whom the Bidder has undertaken such work during last three years (must be supported with work orders)

Name of the organization

Year of Procurement

Total Value

Name of Client’s Contact Person and other details

Signature of Bidder

Name: _______________________

Designation: _______________________

Organization Name: _______________________

Contact No. : _______________________


Page 46 of 145

ANNEXURE-VII

POWER OF ATTORNEY Know all men by these presents, we………………………………… (name of firm and

address of the registered office ) do hereby constitute, nominate appoint and

authorize Mr./Ms………………………..son/daughter/wife of and presently residing

at……………………………….., who is presently employed with /retained by us and

holding position of…………….as our true and lawful attorney (hereinafter referred to as the “Authorized Representative”) to do in our name and on

our behalf, all such acts, deeds and things are as necessary or required in

connection with or incidental to submission of our proposal for and selection as the

<project title> for the <name of the client>………………………………project,

proposed to be developed by the ………………………….. (the “client”) including but not limited to signing and

submission of all applications, proposals and other documents and writings,

Participating in pre bid and other conferences and providing information /responses

to the client, representing us in all matters before the Client, signing and execution of

all contracts and undertakings consequent to acceptance of our proposal and

generally dealing with the client in all matter in connection with or relating to or

arising out of our Proposal for the said project /or upon award thereof to us till the

entering into of the Agreement with the client. AND, we do hereby agree to ratify and confirm all acts, deeds and things lawful done

or caused to be done by our said Authorized Representative pursuant to and in

exercise of the powers conferred by this power and Attorney and that all acts, and

things done by our said Authorized Representative in exercise of the powers hereby

conferred shall and shall always be deemed to have been done by us. [IN WITNESS WHEREOF WE……………………………………THE ABOVE NAMED

PRINCIPAL HAVE EXECUTED THIS POWER OF ATTORNEY ON THIS ……………….. DAY OF ………….. 2022. For …………………………………… (Name and registered address of client)

(Signature, name, designation, and address)


Page 47 of 145

Witness:

1. (Signature, name and address)

2. (Signature, name and address)

Notarized

Accepted …………………………………………………………. (Signature, name, designation, and address of the attorney) Notes:

1. The mode of the execution of the power of Attorney shall be in accordance

with the procedure, if any, laid down by the applicable law and the charter

documents of the executants (s) and when it is so required the same should

be under seal affixed in accordance with the required procedure. 2. Wherever required, the applicant should submitted for verification the extract

of the charter documents and other documents such as a resolution/Power of

Attorney in favor of the person executing this Power of Attorney for delegation

of power hereunder on behalf of the applicant.

3. For a Power of Attorney executed and issued overseas, the document will

also have to be legalized by the Indian Embassy and notarized in the

jurisdiction where the Power and Attorney is being issued. However, the

Power of Attorney provided by the applicants from countries that have signed

The Hague Legislation Convention, 1961 are not required to be legalized by

the Indian Embassy it is carries a conforming Apostle certificate.


Page 48 of 145

ANNEXURE-VIII LETTER OF BID SUBMISSION

To, Chief General Manager, EIS & EPS EdCIL (India) Limited, Ed.CIL House, 18A, Sector- 16A, NOIDA- 201 301 (U.P) SUBJECT-EOI FOR SELECTION OF PARTNER/ORIGINAL EQUIPMENT

MANUFACTURER (OEM)/ SYSTEM INTEGRATOR (SI) FOR PRE-BID TIE-UP PARTICIPATION IN TENDER ISSUED BY AUTHORITIES OF JHARKHAND GOVT. FOR SET UP OF INTEGRATED MATH’S & SCIENCE ROOM IN 525 SCHOOLS OF JHARKHAND WITH MANPOWER AND 3 YEARS MAINTENANCE

-Submission of Bid -

Sir, Having examined the details given in Press Notice, Notice Inviting Bid & Bid Document for the above work, I/we hereby submit the relevant information. 1. I/We hereby certify that all the statements made and information supplied in

the enclosed form ________ and accompanying statements are true and correct.

2. I/We have furnished all information and details necessary for eligibility and

have no further pertinent information to supply. 3. I/We submit the following certificates in support of our suitability, technical

knowledge and capability for having successfully completed the following works:

S. No. Name of Work Certificate From

4. Earnest Money Deposit amounting to Rs. ------------------- in the form of

DD/Pay Order No. ---------- dated ------------ issued by --------------- Bank is submitted.

Enclosures: Date of Submission :


Page 49 of 145

ANNEXURE – IX

Name of the Bank: _______________

To EdCIL (India) Limited, Noida

PERFORMANCE BANK GUARANTE FORMAT In consideration of the Chairman and Managing Director, EdCIL acting through

_____________ (Designation & address of Contract Signing Authority), (hereinafter called

“EdCIL (India) Limited” having agreed under the terms and conditions of agreement/

Contract Acceptance letter No. _________________________ dt ____________ Made

between ____________ (Designation & address of contract signing Authority) and

____________ (here in after called “the said Agency” for the work

______________________ (here in after called “the said agreement”) having agreed for

submission of a irrevocable Bank Guarantee Bond for __________ ( __________

only) as a performance security Guarantee from the Agency for compliance of his

obligations in accordance with the terms & conditions in the said agreement. 1. We ____________ (Indicate the name of the Bank) hereinafter referred to as the Bank,

undertake to pay to the EdCIL (India) Limited an amount not exceeding ________ (

___________ only) on demand by the EdCIL (India) Limited.

2. We ____________ (Indicate the name of the bank, further agree that ( and promise) to

pay the amounts due and payable under this guarantee without any demur merely on a

demand from the EdCIL (India) Limited through the CGM, EdCIL (India) Limited or

________________ (Designation & Address of contract signing authority), stating that

the amount claimed is due by way of loss or damage caused to or would be caused or

suffered by the EdCIL (India) Limited by reason of any breach by the said Agency of

any of the terms of conditions contained in the said agreement or by reason of the

Agency failure to perform the said agreement. Any such demand made on the Bank

shall be conclusive as regards the amount due and payable by the Bank under this

guarantee. However, our liability under this guarantee shall be restricted to an amount

not exceeding _________ ( ________________ Only). 3. (A) We _________ (indicate the name of Bank ) further undertake to pay to the EdCIL

(India) Limited any money so demanded notwithstanding any dispute or dispute raised by the Agency in any suite or proceeding pending before any court or Tribunal relating to liability under this present being absolute and unequivocal.

a. The payment so made by us under this Performance Guarantee shall be a valid discharge of our liability for payment there under and the Agency shall have no claim against us for making such payment.


Page 50 of 145

4. We _________ (Indicate the name of bank) to further agree that the guarantee herein

contained shall remain in full force and effect during the period that would be taken for the performance of the said agreement and that it shall continue to be enforceable till all the dues of the EdCIL (India) Limited under or by virtue of the said agreement have been fully paid and its claims satisfied or discharged by _________

(Designation & Address of contract signing authority) on behalf of the EdCIL (India) Limited certify that the terms and conditions of the said agreement have been fully and properly carried out by the said Agency and accordingly discharges this guarantee.

5 (a) Not withstanding anything to the contrary contained herein the liability of the bank

under this guarantee will remain in force and effect until such time as this guarantee is discharged in writing by the EdCIL (India) Limited or until (date of validity/ extended validity) whichever is earlier and no claim shall be valid under this guarantee unless notice in writing thereof is given by the EdCIL (India) Limited within validity/ extended period of validity of guarantee from the date aforesaid.

(b) Provided always that we _________ (indicate the name of the Bank)

unconditionally undertakes to renew this guarantee or to extend the period of guarantee form year to year before the expiry of the period or the extended period of the guarantee, as the case shall be on being called upon to do so by the EdCIL (India) Limited If the guarantee is not renewed or the period extended on demand, we _________ (indicate the name of the Bank) shall pay the EdCIL (India) Limited the full amount of guarantee on demand and without demur.

6. We _________ ( indicate the name of Bank ) further agree with the EdCIL (India)

Limited that the EdCIL (India) Limited shall have the fullest liberty without our consent and without effecting in any manner out of obligations hereunder to vary any of the terms and conditions of the said contract from time to time or to postpone for any time or from time to time any to the powers exercisable by the EdCIL against the said Agency and to forbear or enforce any of the terms and conditions of the said agreement and we shall not be relieved from our liability by reason of any such variation, or extension being granted to the said Agency for any bearance act or omission on the Package of the EdCIL (India) Limited or any indulgence by the EdCIL (India) Limited to the said Agency for by any such matter or thing whatsoever under the law relating to sureties for the said reservation would relive us from the liability.

7. This guarantee will not be discharged by any change in the constitution of the Bank or

the Agency.

8. We, __________ (indicate the name of the Bank) lastly undertake not to revoke this

guarantee except with the previous consent of the EdCIL (India) Limited in writing. 9. This guarantee shall be valid up to (Date of Completion plus Handholding Period).

Unless extended on demand by EdCIL (India) Limited Notwithstanding anything to the

contrary contained hereinbefore, our liability under this guarantee is restricted to

Rs…………….. (Rs………………………..only) unless a demand under this guarantee

is made on us in writing on or before…………….. we shall be discharged from our


Page 51 of 145

liabilities under this guarantee thereafter.

Dated: the Day of For

(indicate the name of bank) Signature of Banks Authorized official

Witness (Name)___________

Designation with Code No. ---------

1 Full Address-----------

2.


Page 52 of 145

ANNEXURE-X

PROFORMA PRE CONTRACT INTEGRITY PACT

GENERAL This pre-contract Agreement (hereinafter called the Integrity Pact) is made on ___ day of the month of …. 2022, between, on one hand, acting through Shri/Smt. ______________, Designation, EdCIL (India) Limited (hereinafter called the “BUYER”/ “EdCIL” interchangeably, which expression shall mean and include, unless the context otherwise requires, his successors in office and assigns) of the First Package

AND M/s _____________________ represented by Shri _____________, Chief Executive

Officer (hereinafter called the “BIDDER/Seller” which expression shall mean and include,

unless the context otherwise requires, his successors and permitted assigns) of the

Second Package. WHEREAS the EdCIL proposes to procure services towards “EOI for Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by authorities of JHARKHAND Govt. for Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance” for its clients and BIDDER/Seller is willing to offer the said services and related items as referred to in the Bid document no. ……………………………………/ 2022 Dated ………………………….. 2022. WHEREAS the BIDDER is a private company /public company / Government undertaking

/ Partnership / registered expert agency, constituted in accordance with the relevant law in

the matter and the EdCIL is a Public Sector Undertaking under Ministry of Human

Resource Development performing its functions. NOW, THEREFORE, To avoid all forms of corruption by following a system that is fair, transparent and free from

any influence / prejudiced dealings prior to, during and subsequent to the currency of the

contract to be entered into with a view to: Enabling the EdCIL to obtain the desired services as referred to in the Bid document no. ………………………………… dated ……………………………..2022 at a competitive rate in conformity with the defined specifications by avoiding the high cost and the distortionary impact of corruption on public procurement and Enabling BIDDERs to abstain from bribing or indulging in any corrupt practice in order to secure the contract by providing assurance to them that their competitors will also abstain from bribing and other corrupt practices and the EdCIL will commit to prevent corruption, in any form, by its officials by following transparent procedures. The Parties hereto hereby agree to enter into this Integrity Pact and agree as follows:


Page 53 of 145

1. Commitments of the EdCIL

1.1 The EdCIL undertakes that no official of the EdCIL, connected directly or indirectly with the contract, will demand, take a promise for or accept, directly or

through intermediaries, any bribe, consideration, gift, reward, favour or any material or immaterial benefit or any other advantage from the BIDDER, either for themselves or for any person, organization or third Party related to the

contract in exchange for an advantage in the bidding process, bid evaluation, contracting or implementation process related to the contract.

1.2 The BUYER will, during the pre-contract stage, treat all BIDDERs alike, and will

provide to all BIDDERs the same information and will not provide any such

information to any Particular BIDDER which could afford an advantage to that

Particular BIDDER in comparison to other BIDDERs. 1.3 All the officials of the EdCIL will report to the appropriate Government office

any attempted or completed breaches of the above commitments as well as

any substantial suspicion of such a breach. 2. In case any such preceding misconduct on the Package of such official(s) is

reported by the BIDDER to the EdCIL with full and verifiable facts and the same is prima facie found to be correct by the EdCIL, necessary disciplinary proceedings,

or any other action as deemed fit, including criminal proceedings shall be initiated by the EdCIL and such a person shall be debarred from further dealings related to the contract process. In such a case while an enquiry is being conducted by the

EdCIL the proceedings under the contract would not be stalled. 3. Commitments of Bidders

The BIDDER commits itself to take all measures necessary to prevent corrupt

practices, unfair means and illegal activities during any stage of its bid or during any

pre-contract or post-contract stage in order to secure the contract or in furtherance

to secure it and in Particular commit itself to the following:

3.1 The BIDDER will not offer, directly or through intermediaries, any bribe, gift,

consideration, reward, favour, any material or immaterial benefit or other

advantage, commission, fees, brokerage or inducement to any official of the

EdCIL, connected directly or indirectly with the bidding process, or to any

person, organization or third Party related to the contract in exchange for any advantage in the bidding, evaluation, contracting and implementation of the

contract.

3.2 The BIDDER further undertakes that it has not given, offered or promised to

give, directly or indirectly any bribe, gift, consideration, reward, favour, any

material or immaterial benefit or other advantage, commission, fees, brokerage

or inducement to any official of the EdCIL or otherwise in procuring the

Contract or forbearing to do or having done any act in relation to the obtaining

or execution of the contract or any other contract with the Government for

showing or forbearing to show favour or disfavor to any person in relation to the

contract or any other contract with the Government.


Page 54 of 145

3.3 Bidders shall disclose the name and address of agents and representatives

and Indian BIDDERs shall disclose their foreign principals or associates. 3.4 BIDDERS shall disclose the payments to be made by them to agents/brokers

or any other intermediary, in connection with this bid/contract. 3.5 The BIDDER further confirms and declares to the EdCIL that the BIDDER is the

original manufacturer/integrator/authorized government sponsored export entity and has not engaged any individual or firm or company whether Indian or foreign to intercede, facilitate or in any way to recommend to the EdCIL or any of its functionaries, whether officially or unofficially to the award to the contract to the BIDDER, nor has any amount been paid, promised or intended to be paid to any such individual, firm or company in respect of any such

intercession, facilitation or recommendation, as the case shall be for satisfactory performance of the proposed terms of Bidder.

3.6 The BIDDER, either while presenting the bid or during pre-contract negotiations

or before signing the contract, shall disclose any payments he has made, is

committed to or intends to make to officials of the EdCIL or their family

members, agents, brokers or any other intermediaries in connection with the

contract and the details of services agreed upon for such payments. 3.7 The BIDDER will not collude with other Parties interested in the contract to

impair the transparency, fairness and progress of the bidding process, bid

evaluation, contracting and implementation of the contract. 3.8 The BIDDER will not accept any advantage in exchange for any corrupt

practice, unfair means and illegal activities. 3.9 The BIDDER shall not use improperly, for purposes of competition or personal

gain, or pass on to others, any information provided by the EdCIL as Package

of the business relationship, regarding plans, technical proposals and business

details, including information contained in any electronic data carrier. The

BIDDER also undertakes to exercise due and adequate care lest any such

information is divulged.

3.10 The BIDDER commits to refrain from giving any complaint directly or through

any other manner without supporting it with full and verifiable facts.

3.11 The BIDDER shall not instigate or cause to instigate any third person to commit

any of the actions mentioned above.

3.12 If the BIDDER or any employee of the BIDDER or any person acting on behalf

of the BIDDER, either directly or indirectly, is a relative of any of the officers of

the EdCIL, or alternatively, if any relative of an officer of the EdCIL has financial

interest / stake in the BIDDER’s firm, the same shall be disclosed by the

BIDDER at the time of filing of Bid.


Page 55 of 145

3.13 The BIDDER shall not lend to or borrow any money from or enter into any

monetary dealings or transactions, directly or indirectly, with any employee of

the EdCIL. 4. PREVIOUS TRANGRESSION

4.1 The BIDDER declares that no previous transgression occurred in the last three

years immediately before signing of this integrity pact, with any other company

in any country in respect of any corrupt practices envisaged hereunder or with

any Public Sector Enterprise in India or any Government Department in India

that could justify BIDDER’s exclusion from the bid process. 4.2 The BIDDER agrees that if it makes incorrect statement on this subject.

BIDDER can be disqualified from the Bid process or the contract, if already

awarded, can be terminated for such reason. 5. EARNEST MONEY DEPOSIT

5.1 While submitting Technical bid, the BIDDER shall deposit an amount of Rs. ………. as Earnest Money with the EdCIL through Account Payee Bank Draft or a Pay Order in favour of EdCIL (India) Limited.

5.2 The instrument for Security Deposit made shall be valid up to the specified

period and the bidder shall be liable to keep the said instrument valid for such

extended period as the case shall be for satisfactory performance of the terms

of Bidder above referred till the complete conclusion of the contractual

obligations to the complete satisfaction of both the BIDDER and the EdCIL,

including warranty period, whichever is later. 5.3 In case of the successful BIDDER a clause would also be incorporated in the

Article pertaining of Performance Bond in the corresponding Contract

governing such agreement that the provisions of Sanctions for Violation shall

be applicable for encashment of Performance Bank Guarantee deposited

towards forfeiture of said amount in case of a decision by the EdCIL to forfeit

the same without assigning any reason for imposing such sanction. 5.4 No interest shall be payable by the EdCIL to the BIDDER on Earnest Money

Deposit for the period of its currency.

6. SANCTIONS FOR VIOLATIONS

6.1 Any breach of the aforesaid provisions by the BIDDER or any one employed

by it or acting on its behalf (whether with or without the knowledge of the

BIDDER) shall entitle the EdCIL to take all or any one of the following actions,

wherever required:

i. To immediately call off the pre contract negotiations without assigning any

reason or giving any compensation to the BIDDER. However, the

proceedings with the other BIDDER(s) would continue.


Page 56 of 145

ii. The Earnest Money Deposit (in pre-contract stage) and/or Security Deposit /

Performance Bond (Bank Guarantee) (after the contract is signed) shall

stand forfeited either fully or partially, as decided by the EdCIL and the

BUYER (EdCIL) shall not be required to assign any reason therefore.

iii. To immediately cancel the contract, if already signed, without giving any

compensation to the BIDDER.

iv. To recover all sums already paid by the EdCIL, and in case of an Indian BIDDER with interest thereon at 2% higher than the prevailing Prime Lending Rate of State Bank of India, while in case of a BIDDER from a country other than India with interest thereon at 2% higher than the LIBOR as the case shall be. If any outstanding payment is due to the BIDDER from

the EdCIL in connection with any other contract for any other stores or on any account whatsoever and by whatsoever name called, such outstanding payment could also be utilized to recover the aforesaid sum and interest thereto.

v. To encash the advance bank guarantee and performance bond/warranty

bond, if furnished by the BIDDER, in order to recover the payments, already made by the EdCIL, along with interest.

vi. To cancel all or any other Contracts with the BIDDER. The BIDDER shall be

liable to pay compensation for any loss or damage to the EdCIL resulting from such cancellation/rescission and the EdCIL shall be entitled to deduct the amount so payable from the money(s) due to the BIDDER.

vii. To debar the BIDDER from Participating in future bidding processes of the

Government of India for a minimum period of five years, which shall be further extended at the discretion of the EdCIL.

viii. To recover all sums paid in violation of this Pact by BIDDER(s) to any

middleman or agent or broker with a view to securing the contract.

ix. In cases where irrevocable Letters of Credit have been received in respect of

any contract signed by the EdCIL with the BIDDER, the same shall not be opened.

x. Forfeiture by way of encashment of Performance Bond in case of a decision

by the EdCIL to forfeit the same without assigning any reason for imposing sanction for violation of this Pact.

6.2 The EdCIL will be entitled to take all or any of the actions mentioned at Para

6.1(i) to (x) of this Pact also on the Commission by the BIDDER or any one

employed by it or acting on its behalf (whether with or without the knowledge

of the BIDDER), of any offence as defined in Chapter IX of the Indian Penal


Page 57 of 145

code, 1860 or Prevention of Corruption Act, 1988 or any other statute enacted

for prevention of corruption. 6.3 The decision of the EdCIL to the effect that a breach of the provisions of this

Pact has been committed by the BIDDER shall be final and conclusive on the

BIDDER. However, an Independent Monitor(s) shall be appointed by EdCIL, in

case of breach of the provisions of the pact.

7. INDEPENDENT MONITORS

7.1 An Independent monitor (s) shall be appointed by EdCIL, incase of breach of the provisions of the pact.

7.2 The task of the Monitors shall be to review independently and objectively, whether and to what extent the Parties comply with the obligations under this Pact.

7.3 The Monitors shall not be subject to instructions by the representatives of the Parties and perform their functions neutrally and independently.

7.4 Both the Parties accept that the Monitors have the right to access all the documents relating to the project / procurement, including minutes of meetings.

7.5 As soon as the Monitor notices, or has reason to believe, a violation of this Pact, he will so inform the Authority designated by the EdCIL.

7.6 The BIDDER(s) accept that the Monitor has the right to access without restriction to all Project documentation of the EdCIL including that provided b the BIDDER. The BIDDER will also grant the Monitor, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his project documentation. The same is applicable to Sub-bidders. The Monitor shall be under contractual obligation to treat the information and documents of the BIDDER/Sub-bidder(s) with confidentiality.

7.7 The EdCIL will provide to the Monitor sufficient information about all meetings among the Parties related to the Project provided such meetings could have an impact on the contractual relations between the Parties. The Parties will offer to the Monitor the option to Participate in such meetings.

7.8 The Monitor will submit a written report to the designated Authority of BUYER/Secretary in the Department/within 8 to 10 weeks from the date of reference or intimation to him by the EdCIL / BIDDER and, shall the occasion arise, submit proposals for correcting problematic situations.

8. FACILITATION OF INVESTIGATION

In case of any allegation of violation of any provisions of this Pact or payment of

commission, the EdCIL or its agencies shall be entitled to examine all the

documents including the Books of Accounts of the BIDDER and the BIDDER shall

provide necessary information and documents in English and shall extend all

possible help for the purpose of such examination.


Page 58 of 145

9. LAW AND PLACE OF JURISDICTION

This Pact is subject to Indian Law. The place of performance and jurisdiction is the seat of the EdCIL.

10. OTHER LEGAL ACTIONS

The actions stipulated in this Integrity Pact are without prejudice to any other legal

action that shall follow in accordance with the provisions of the extant law in force

relating to any civil or criminal proceedings. 11. VALIDITY

11.1 The validity of this Integrity Pact shall be governed by the terms of the NIT No.

EdCIL/EIS & EPS/PROC/JHARKHAND/2022-23/02 dated 29/04/2022 towards

complete execution of the contract to the satisfaction of both the EdCIL and the BIDDER/Seller, including warranty period, whichever is later. In case BIDDER is

unsuccessful, this Integrity Pact shall expire after six months from the date of the

signing of the contract awarding the Bidder with successful bidder.

11.2 Shall one or several provisions of this Pact turn out to be invalid; the remainder of

this Pact shall remain valid. In this case, the Parties will strive to come to an

agreement to their original intentions.

12. The Parties hereby sign this Integrity Pact at ________ on __________.

EdCIL (India) Limited BIDDER Name of the Officer : CHIEF EXECUTIVE OFFICER Designation: Witness: Witness

2. _____________________ 1. ____________________

3. _____________________ 2. ____________________ (The Pre Contract Integrity Pact shall be modified based in line with the conditions of the Bid Documents).


Page 59 of 145

ANNEXURE XI

MANUFACTURER AUTHORIZATION FORM

No. _____________ dated _______________ To _______________ _______________ _______________ Dear Sir:

Bid No. ________________________ We _______________________________________ who are established and reputed manufacturer of ___________________________________________________ (name and description of goods offered) having factories at _________________ (address of factory) with factory registration no. ------------------------------------------ do hereby authorize M/s________________________________ (Name and address of Agent) to submit a bid, and sign the contract with you for the goods manufactured by us against the above bid. We hereby extend our full warranty as per Clause 3 of the Conditions of Contracts, for the goods and services offered for supply by the above firm against this Invitation for Bid. We further certify that we shall support vendor with all related spares and maintenance during the entire contract period including the period of warranty/AMC.

Yours faithfully,

(Name):_______________________

(Name of manufacturers):_______________________ Note: This letter of authority should be on the letterhead of the manufacturer or OEM and should be signed by a person competent and having the power of attorney to legally bind the manufacturer.


Page 60 of 145

Annexure XII CONTRACT FORM

(at the time of award of work)

THIS AGREEMENT made the ……. day of …... 2022 between ………. (Name of

Procurement Consultant (hereinafter "the Procurement Consultant") on behalf of

JHARKHAND GOVT. of the one Package and ……………. (Name & address of Supplier)

…………………. (Hereinafter called "the Supplier") of the other Package:

WHEREAS the Purchase is desirous that certain Goods and ancillary services viz.

………………….. (Brief Description of Goods and Services) and has accepted a bid by the

Supplier for the supply of those goods and services in the sum of ……………. (Contract

Prize in words and Figures) (Hereinafter called "the Contract Rate")

NOW THIS AGREEMENT WITNESSETH AS FOLLOWS: 1. In this Agreement words and expressions shall have the same meanings as are

respectively assigned to them in the Conditions of Contract referred to. 2. The following documents shall be deemed to form and be read and constructed as

Package of this Agreement, viz., [a] The Rate Schedule submitted by the Bidder; [b] The Schedule of Requirements; [c] The Terms & Conditions [d] The Consignee's Notification of Award/ Purchase Order 3. In consideration of the payments to be made by the Consignee to the Supplier as

hereinafter mentioned, the Supplier hereby covenants with the Consignee to provide the goods and services and to remedy defects herein in conformity in all respects with the provisions of the Contract.

4. The Consignee hereby covenants to pay the Supplier in consideration of the

provision of the goods and services and the remedying of defects therein, the Contact rates or such other sum as shall become payable under the provisions of the Contract at the times and in the manner prescribed by the Contract.

Brief Particulars of the goods and services, which shall be supplied/ provided by the Supplier, are as under:


Page 61 of 145

S. No. Brief Description

of Goods & Services

Quantity to be supplied

Unit Rate Total Rate Delivery Terms

TOTAL VALUE: DELIVERY SCHEDULE: IN WITNESS where of the Parties hereto have caused this Agreement to be executed in accordance with their respective laws the day and year first above written. Signed, Sealed and Delivered by the said ……………………………. (For the Consignee) in the presence of ………………….. Signed, Sealed and Delivered by the said ……………………………. (For the Supplier)

in the presence of …………………..


Page 62 of 145

ANNEXURE – XIII Format of Memorandum of Understanding

(*Format when backend Partner is a single bidder)

This Memorandum of Understanding (MoU) is made on the day of at New Delhi by and between:

M/s EdCIL India Limited, hereinafter referred to as “EdCIL”, which expression shall include its successors and its permitted assigns, of one Package.

AND

M/s (vendor name), registered under the Indian Companies Act 1956/2013 (whichever is applicable), with its registered office at-------------------, hereinafter referred to as “ ------------------”, which expression shall include its successors and permitted assigns, of the other Package.

“EdCIL” and “ ”are individually referred to as “Party” and collectively as “Parties”.

WHEREAS EdCIL, a Government of India Enterprise under the Ministry of Education, is a leading company in Education Department and has to its credit successful execution of many consultancy and turnkey projects in the fields of Telecom, IT and Civil both in India and abroad and it also acts as procurement consultant/agent/executing agency/implementing agency for number of Government of India enterprises/undertaking.

WHEREAS (vendor name) is in the business of .

WHEREAS (Client Name) (herein after called “”) issued TENDER No. dated for ‘ , hereinafter referred to as “ (Client Name) tender” /”Work”/”Project”.

WHEREAS EDCIL published EOI No. dated (hereinafter referred as EdCIL EOI) for selection of back-end Partner for (Client Name) tender.

AND WHEREAS (Vendor Name) submitted their offer and pursuant to the same was selected by E as back-end Partner for (Client Name) Tender.

Now, therefore, it is agreed between the Parties as under:

1. The Parties wish to work together with the understanding that EDCIL shall act as

the bidder (lead bidder) and (vendor name) (Partner for ) for Participating in the (client name) Tender. *Please note that the term “Lead bidder” shall be mentioned only when EDCIL shall bid in consortium with backend Partner.

2. (vendor name) shall not Participate directly in (client name) Tender and

shall not quote rates to any other Party Participating/pre-qualified for (client


Page 63 of 145

name) Tender directly or indirectly through its subsidiary, Partnership, ownership, individual firm etc.

3. On award of the work of the (client name) Tender to EDCIL, EDCIL will enter

into a detailed agreement with (vendor name) based on the terms & conditions of this MoU, EDCIL EOI and (client name) Tender.

4. The term of this MoU shall be for Two (02) months (“Term”) from the date of

signing of this MoU (“Effective Date”) or till the completion of the project & release of all payments thereof whichever is later. All obligations hereunder shall only apply during the Term of this MoU and to such obligations and commitments in relation to the Tender/Work/Project under the scope of EDCIL EOI & (Client name) tender, as may have been undertaken by the Parties during the Term with validity exceeding the Term. The Term of this MoU can be extended by mutual agreement between the Parties, depending upon the requirement.

5. After mutual consultation, a joint team consisting of representatives of the Parties will be formed for various activities like, technical discussions, deciding the preparation of final Bid/offer, terms & conditions and demonstration of functionality required in the (Client name) Tender/Work/Project.

6. EDCIL and (vendor name) hereby mutually agree that both of them shall remain

as irrevocable members of this tie-up for the complete execution and completion of (client name) Tender/Work/Project (as per scope of EDCIL EOI & (Client name) tender).

7. Expenses towards bid preparation would be borne by the individual Parties viz.

EDCIL and (vendor name) for their respective work. EDCIL will not reimburse any such expenses to (vendor name) towards preparation and submission of the bid.

8. All technical, financial and commercial terms and conditions of the Tender, except pricing, risk purchase, limitation of liability, advance payment & termination, will apply on back-to-back basis between EDCIL and (vendor name), for their respective Package/scope of work. However, if (vendor name) fails to fulfill its Package of the work to the satisfaction of EDCIL, then EDCIL shall have the right to terminate the contract with (vendor name) and get the same executed Departmentally or by other agencies at the risk and cost of (vendor name).

9. Notwithstanding anything contained in any other agreement, document,

correspondence, arrangement between the Parties in respect of (Client name) Tender/ Works / Projects, the (vendor name) understands, agrees and undertakes that:

a) (vendor name) Participated in EdCIL EOI and that all terms & conditions of the EdCIL EOI shall apply to (vendor name).

b) Prices quoted by (vendor name) shall remain firm and fixed till the execution of the Tender.

c) The payments terms between EdCIL & (vendor name) are on back


Page 64 of 145

to back basis and the payment shall be released to (vendor name) by EDCIL only if and when received by EDCIL from (Client name) and subject to submission of complete documents and invoices etc. by it.

d) (vendor name) will not demand or make any claim under any law

with respect to the pending payment till the time corresponding payment is received by EDCIL from (Client name). EDCIL shall not be responsible in any manner whatsoever for any delay in releasing the payments or withholding of payments by (Client name).

e) the (day) date of delivery of goods and/or rendering of services by the (vendor name) shall be the date of realization of payment from the client once the goods and/or services are accepted by the client.

f) if in the instant contract, (vendor name) is acting only as trader /

reseller / distributor/authorized agents and/or is engaged in a WORKS contract, no benefits under MSME Act 2006 and PPP Policy 2012 as per MSE Guidelines issued by Ministry of MSME would be applicable to it on account of acceptance of back to back payment terms as above. By agreeing to the terms of (client name) Tender, the (vendor name) agrees to forgo its rights under this Act and Policy.

g) (vendor name) hereby agrees to ensure timely GST compliances

as per the statutory requirements. All the costs pertaining to any GST non-compliance including but not limited to any loss of eligible input tax credit due to non-payment/non-filing of GST return and applicable interest/penalties shall be borne/indemnified by (vendor name). Further (vendor name) hereby agrees that EDCIL reserves the right for reimbursement of any such cost incurred out of the aforesaid non-compliance(s). (vendor name) will provide payment of GST proof i.e. GSTR-1, GSTR-3B, cash ledger and challan for taking GST payment from EDCIL against invoices.

h) Any deductions by the (Client name) towards

LD/penalties/contingencies shall be borne by (vendor name) in terms of EDCIL EOI.

i) At any given point of time, (vendor name) may not assign or

delegate its rights, duties or obligations under this MOU without prior written consent of EDCIL.

j) On award of work of the Tender/Work/Project, (vendor name) shall

provide its GeM Seller id to EDCIL (not applicable for “works” contract or non-Indian vendor).

k) In the event of breach of any of the terms & conditions of this MOU or in case of any default of any terms & conditions of this MOU, on the


Page 65 of 145

Package of the (vendor name), EDCIL reserves the right to take necessary steps / action as per available documents, including but not limited to, termination of contract, forfeiture of BG / EMD, blacklisting / banning etc. and execute the work at their risk & cost.

10. EDCIL and (vendor name) agree to keep confidential all information shared with each other and disclose to third Party only after taking prior written consent of each other. This clause excludes information available in public domain. The confidentiality provisions of this MoU shall remain in full force and effect during the term of this MoU and 12 months thereafter.

11. Any sum of money (including refundable security deposit) due and payable to the (vendor name), under this contract or any other contract entered between the Parties herein whether continuing or completed may be appropriated by EDCIL and set off against any claim of EDCIL of any nature whatsoever, arising under this contract or any other contract entered into between the Parties, herein whether continuing or completed.

12. Nothing in this MoU shall constitute, create or give effect or recognize a JV,

Partnership or business entity of any kind. 13. This MoU shall be construed and governed by the laws of India and the

Parties hereby submit to the exclusive jurisdiction of the Delhi Courts of Law.

14. Any matter, which is not stipulated in the MoU, shall be settled in good faith by discussion among the Parties in the spirit of understanding and cooperation.

15. All disputes or differences whatsoever arising among the Parties under and/or in connection with and/or in respect of this MoU shall be referred to and decided by a sole arbitrator, who shall be nominated by the CMD, EDCIL. The arbitration shall be conducted in accordance with Arbitration and Conciliation Act of 1996, as amended from time to time, and the venue of the arbitration shall be in New Delhi. *Please Note that in case of agreement/MoU with Government Organisation, the following clause shall be applicable:

In the event of any dispute or difference relating to the interpretation and application of the provisions of this contract, such dispute or difference shall be taken up by either Party for resolution through AMRCD as mentioned in DPE OM No. 4(1)/2013-DPE (GM)/FTS-1835 dated 22.05.2018.

Any Party aggrieved with the decision of the committee at the Ist level (tier) may prefer an appeal before the Cabinet Secretary at the Second level (tier) within 15 days from the date of receipt of decision of the committee at First level, through its Administrative Ministry/ Deptt in terms of para 4, 5 and 7 of above DPE OM dated 22.05.2018, whose decision will be final and binding on all concerned.

16. During its Term, this MOU will be terminated in the event of

a. Client withdrawing the Tender provided it does not create any financial


Page 66 of 145

obligation on EDCIL. b. Tender not awarded to EDCIL c. Mutual agreement between the “Parties” d. As per EDCIL EOI

17. Notices and other communications under this MoU shall be in writing and communicated through post, courier, fax, email or any other recognized mode of such communication. All such notices and communications shall be directed to the address as mentioned in the MoU.

18. By signing this MoU, the “Parties” acknowledge that it correctly records the understanding they have reached with regard to the Project.

19. EOI document, technical / financial bid, any further negotiations, all correspondences with or from ………………… (vendor name) till EOI finalization shall be an integral of this MOU.

IN WITNESS WHEREOF, each Party hereto has caused this MoU to be executed in duplicate to be effective as of the Effective Date, by its duly authorized representative.

(For Telecommunications (For Private Limited)

Signature: Signature: Name: Name: Designation: Designation: Date: Date: Witness: Witness:


Page 67 of 145

Annexure XIV

Bid Security Declaration

To,

……………………………

…………………………………….

Ref: Our Bid No. -------------------------------dtd.

I/We, ………………….. irrevocably declare as under:

I/We understand that, as per Clause …….. of Tender/bid conditions, bids must be

supported by a Bid Security Declaration in lieu of Earnest Money Deposit.

I/We hereby accept that I/We may be disqualified from bidding for any contract with you

for a period of Three Years from the date of disqualification as may be notified by you

(without prejudice to JHARKHAND rights to claim damages or any other legal recourse ) if,

1) I am/We are in a breach of any of the obligations under the bid conditions.

2) I/We have withdrawn or unilaterally modified/amended/revised, my/our Bid

during the bid validity period specified in the form of Bid or extended period, if

any.

3) On acceptance of our bid by JHARKHAND, I/we failed to deposit the

prescribed Security Deposit or fails to execute the agreement or fails to

commence the execution of the work in accordance with the terms and

conditions and within the specified time.

Signature

Name & designation of the authorized person signing the Bid-Securing Declaration Form:

Duly authorized to sign the bid for and on behalf of : --------------------------------(complete

name of Bidder)

Dated on----------day of ------------month--------------year.

(Note: In case of a Joint venture, the Bid Security Declaration must be in the name of all

Packagers to the Joint Venture that submits the bid).


Page 68 of 145

CHAPTER-VII

FINANCIAL BID

Instructions to Bidders

1. Financial Bid shall be submitted with full price details. Financial Bid shall contain only the prices duly filled in as per the format given in Schedule of Rates provided in the tender document.

2. The Bidder may quote for either Package A or Package B or Package C or any other combination. The Evaluation of the EOI shall be undertaken for each Package separately and the agency shall be considered for the said EOI on the basis of individual Package i.e. Package A, Package B and Package C.

3. The Bidder should quote for all the items listed in each Package i.e. Package A, Package B & Package C of this document. In case, the Bidder/s does not quote for all of the items of either Package i.e. Package A or Package B or Package C, the Bid shall be treated as incomplete and shall be rejected summarily.

4. The items to be supplied/ delivered/ installed/ commissioned to various 525 schools shall be informed after the completion of the process. The rate shall be inclusive of all charges including octroi, transportation (as per the location), packing, loading and unloading (at designated location), Insurance etc. and nothing shall be paid extra.

5. The bid shall be evaluated on individual Package i.e. Package A, Package B and

Package C as given in the Financial Bid and the supply order shall be placed to a bidder based on individual package.

6. The prices quoted by the bidder shall be fixed for the quantity mentioned for the

duration of the contract and shall not be subject to adjustment on any account. Price should be firm for any positive or negative variation in quantities up to 100%.

7. Price bid has to be filled online on EdCIL’s E-tendering Portal. In case, the financial

bid documents are not complete in all respect the same should be treated as incomplete at financial bid stage and shall be considered non-responsive.


Page 69 of 145

Proforma for Financial Bid (to be filled online in Excel sheet) With respect to the EOI dated ____ and after studying given specifications & all other conditions of the bid document etc., we hereby submit our financial bid as under: S.No. Particulars Price (inclusive of all taxes)

(Rs.) (both in figures & words)

One Set INTEGRATED MATHS & SCIENCE ROOM

Price should include the following:

A. Installation shall consist of needed table, charts, training manual & QR coded videos, cupboards, all models in working condition & all smaller kits neatly labeled & stored as specified in the work order such that the center is completely child safe.

B. The agency also provides one manpower in every 10 schools for 3 years at their own cost. After installation within 90 days, the Bidder shall provide comprehensive training to teachers selected by client at district level.

C. Twelve months (12) warranty of all the items supplied from the date of installation for manufacturing defect only along with 3 year Maintenance.

1. Package A (MINI SCIENCE CENTER)-

ONE SET

Rs…………………

(Rupees …..in words)

2. Package B (SCIENCE KITS & Chart)-

ONE SET

Rs…………………


3. Package C (MATHEMATICS KITS & various Charts)- ONE SET

Rs…………………


Grand Total (A+B+C) Rs…………… (Rupees …..in words)

Note:

I.

Unit Price quoted in the financial Bid shall include all the cost involved including all duties and sales, service and other taxes (GST) already paid or payable, packing, handling, transportation, installation, Training, Maintenance for the 3 year, warrantee for 1 year, manpower for 3 years and all other sundry expenses (foreseen or unforeseen). The price quoted by the Bidder shall be fixed for the entire period of contract and no price variation is allowed on any account.

II. Discount or any other offers affecting the package price must be mentioned here only and shall not be considered if mentioned at any other place of the bid.

III. In case of discrepancy between unit price and total amount, the unit price shall prevail.

IV. Financial Bid should only indicate prices without any condition or qualification whatsoever

V. Total price inclusive of taxes & all other charges should be given in the above table.

VI. Bidders should express the price of their product in Indian currency only.

Date: Place:


Page 70 of 145

LIST OF SET UP OF INTEGRATED MATHS & SCIENCE

ROOM IN SCHOOL AND SPECIFICATIONS

Package A (MINI SCIENCE CENTER)

S. No.

Item Name Technical Specifications

1 Rainwater harvesting

SIZE: 182 mm x 305 mm x 145 mm

Material: This working model of Rainwater harvesting contain 103 mm x 103 mm ABS molded plastic cube along with the top tray, 1 storage tank & pipe connection. Whole assembly should be fixed on 182 mm x 305 mm ABSplastic base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

2 Hand pump

SIZE: 195 mm x 145 mm x 200 mm (minimum)

MATERIAL: The working model should consist of a transparent pipe having 170 mm length & 50 mm diameter, 2 disc/rings, pipe & a pumping handle/shaft. Also provide 1 plastic box. A conceptual chart in Hindi/English language of minimum A3 size is provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

3 Sun Earth & moon model


MATERIAL: This working model should contain minimum 35 mm earth globe, minimum 10 mm ball, bearing, 80 mm HDPE molded ball, gears & other necessary fittings. Whole assembly should be fixed on 305 mm x 305 mm ABS Molded base. Base thickness should not be less than 2.7 mm.

A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

4 Inertia ball

SIZE: 12” x 12” x 3”

MATERIAL: The working model Contain transparent pipe having 50 mm length/height & 200 mm diameter, 220 mm Disc, bearing, ball, & other necessary fittings. Whole assembly should be fix on 305 mm x 305 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 71 of 145

5 R o c k e t l a u n c h e r


MATERIAL: This model should contain 2 vertical supports, 1 plastic molded hollow rocket, rubber bands, metal rod & other necessary fittings. Whole assembly should be fix on 182 mm x 305 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart In Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

6 Angles between 2 plains


MATERIAL: This working model should contain 1 protractor, 2 ABS plates of 103 x 103 size other necessary fittings. Whole assembly should be fix on 150 mm x 200 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

7

HUMAN BATTERY

SIZE: The working model should be provided with an ABS molded casing of s:ize- 100 mm x 128 mm x 128 mm and minimum 1 mm wall thickness.

MATERIAL: The working model consist to two metallic plates 4” x 4” each with rounded edges, one being copper and other being galvanized iron. A good quality multi-meter / amp meter properly fixed inside the protective casing. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

8 FREELY SUSPENDED MAGNET

SIZE: The model should be provided with a molded ABS casing of size: 3” x6” x 12” and 2.7 mm wall thickness.

MATERIAL: The working model should consist of a freely suspended bar magnet of size 38mm x 13mm x 8mm with vertical axial rotation mechanism and a magnetic compass. If needed wall hook and fittings should be provided. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

9 MAGNETIC SPRING

SIZE: The working model should be provided on an ABS molded base of 286 mm x 150mm and 2.7mm thickness and height of 160 mm.

MATERIAL: The working model should consist of an acrylic/plastic rod of 19 mm diameter. It should have 5 ring magnets I.D. 25mm, O.D. 52 mm and 8 mm thick.


Page 72 of 145

Magnet must have ABS molded case and ABS molded bracket of size 55 mm x 160 mm as vertical supports to hold the acrylic rod horizontally. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

10 MAGNETIC FIELD VISUALIZATION WITH COMPASSESS

SIZE: The model is to be provided with a molded ABS casing of minimum size: 200 mm x 150 mm x 8 mm and 2.7mm wall thickness. It also has a molded bottom casing of 2.7mm wall thickness to encase electrical connection and/or mechanism if needed. MATERIAL: This working model should contain minimum 16 magnetic compasses, a bar magnet, a Horse-shoe magnet & a ring magnet and conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

11 Mission moon


MATERIAL: This working model should contain print, rocket model, ropes, cup hooks, Astronaut token & other necessary fittings. Whole assembly should be fixed on 305 mm x 500 mm ABS molded plastic base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

12 SHAPE OF EARTH DUE TO ROTATION

SIZE: The model should be provided with a molded casing of size: 6” x 6” x 8” and 2.7mm wall thickness. It should have a molded bottom casing to encase mechanism if needed.

MATERIAL: This exhibit should consist of ABS molded ring of minimum 35 mm Diameter, metal/plastic rod, plastic/paper strip thread & other necessary fittings. While pulling the thread, rod should spin & strips go upward. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

13 THE CLIMBING MONKEY

SIZE: 200mm x 8mm x 1500 mm wall mounted

MATERIAL: This exhibit should contain a printed template of monkey, EVA, 4mm thick 3 meter thread, 2 plastic molded rings of minimum 35 mm diameter with soft edges, a hanging plate and other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 73 of 145

14 CONSERVATION OF MOMENTUM – MARBLES SLIDE

SIZE: 410mm x 80mm x 210mm

MATERIAL: The exhibit should consist of a powdered coated metal slide and 5 marbles. A wall boundary provided to avoid the marbles from falling down on floor. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

15 DOUBLE CONE

SIZE: 480 mm x 150 mm x 50 mm MATERIAL: This exhibit should consist of a slope track fixed on the ABS molded base of size 480 mm x 150 mm and a HDPE molded cylinder having handles on both sides and a HDPE molded double cone with handles on both sides. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

16 SELF BALANCING DOLL

SIZE: This model should be provided with a molded ABS casing of size: 6” x 6” x 8” MATERIAL: This exhibit should consist of a balancing doll with counter- weights placed over a horizontal support. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

USE: This working model should consist of a mechanism in which a doll balances on a thin rope/ rod and even if it is given a deflection, it does not fall down. The center of gravity of the system is altered so that it is well below the point of balance, thereby making the system very stable and self-balancing.

17 TOWER OF PISA


MATERIAL: This exhibit should consist of 8 mm square section solid rod metal frame – MS, and a metal ball with hook. The ball should be hung such that it is exactly at the center of gravity of the frame. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

18 Anemometer


MATERIAL: This exhibit should consist of ABS molded caps/cups or plastic scoop, pipe/rod, arrow & other necessary fittings. Whole assembly should be fixed on 150 mm x 200 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 74 of 145

19 Which one dances longer

SIZE: 305mm x 500 mm x 20 mm

MATERIAL: The exhibit should consist of a ABS molded disc of minimum 220 mm diameter & 3 mm thickness, bearing & other necessary fittings. Whole assembly should be fixed on 305 mm x 500 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 color print havinga QR code that is linked to an application for seeing conceptual video.

20 BERNOULLI’S EXPERIMENTWITH ODD BALLS

SIZE: 12” x 7” x 18 ”

MATERIAL: The exhibit should consist of a metal frame 12” x 7” x 18” made in 8mm square section MS rod with powder coating. Light weight balls with hook attached to the frame by a thread. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

21 Simple machine ( Lever system )

SIZE: The model should be provided with a molded ABS casing of size 6” x 8” x 6” having minimum 2.7 mm wall thickness.

MATERIAL: The model should consist of levers, weights, & other necessary fittings & whole assembly should be enclosed in a 6” x 8” x 6” ABS molded case & this case should be attachable & detachable. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

22 ARCHEMEDES’ SCREW


MATERIAL: The exhibit should consist of an ABS molded handle and metal frame, pipes & tubes & other necessary fittings. The entire assembly should be watertight so that no water leaks out. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

23 Simple Machines - To understand thefunctions of Lever – Pulley

Type : 12” x 20” x 0.5”

Material & Size: This activity contains pulleys of ABS plastic material, weights, rope looped, cup hooks & other necessary fittings. Whole assembly should be fix on 305 mm x 500 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour prints having a QR code that is linked to an application for seeing conceptual video.


Page 75 of 145

24 WHEEL AND AXLE LOADLIFTING


Material: This exhibit should consist of big & small disc/ wheel with handle, the small disc/wheel should have minimum 2” diameter & big disc / wheel should have 4” diameter. Metal/plastic rod, thread, weight & other necessary fittings should be provided. Weight should be enclosed in ABS case of size 200 mm x 75 mm x 305 mm & attach wheel/disc outside of the case. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

25 ANAMORPHOSE

SIZE: This model should be provided with a molded ABS casing of size 8”x 12” x 6”

MATERIAL: The exhibit should consist of cylindrical pipe with highly reflective surface, a template of a distorted image proper fixed inside the protective plastic casing of size 8” x 12” x 6”. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptua video.

26 COMBINED VISION

SIZE: The model should be provided with a molded ABS casing of size: 6”x8” x 6” and 2.7mm wall thickness.

MATERIAL: The exhibit should consist of two mirrors 2.7 mm thick, arranged inside the protective casing such that one mirror reflects the left wall on the front left viewport and the other mirror reflects the right wall onto the front right viewport. Two templates – colored, fixed inside the casing, one on the inner left wall and other on the inner right wall. A conceptual chart in Hindi/English language of Minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

27 ZOETROPE

SIZE: minimum 103 mm x 103 mm x 203 mm MATERIAL: The exhibit should consist of ABS molded plastic case of minimum 103 mm x 103 mm x 103 mm size having minimum 1 mm thickness ABS molded cylinder of minimum diameter 100 mm, horse template & other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

28 Surface & vacuum


MATERIAL: This exhibit should consist of Vacuum plug, rough surface etc. Whole assembly should be fixed on 305 mm x 182 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 76 of 145

29 PERISCOPE

SIZE – The model provided with a molded ABS casing of size: 500 mm x 200 mm x 150 mm and 2.7mm wall thickness Internal mirrors & other necessary fitting should be provided. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

30 VISCOSITY

SIZE: 305 mm x 182 mm x 160 mm ( minimum )

MATERIAL: This exhibit should consist of 3 transparent tubes fixed inside a flipping frame attached on a 305 mm x 182 mm plastic molded base. Base thickness should not be less than 2.7 mm. The three tubes contain water, vegetable oil and glycerin and a marble each. The tubes should be leak proof. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

31 THAUMATROPE

SIZE: minimum 103 mm x 103 mm x 173 mm MATERIAL: The exhibit should consist of ABS molded plastic case of minimum 103 mm x 103 mm x 103 mm in size having minimum 1 mm wall thickness Rod /pipe , parrot & cage template & other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

32 INTERNALREFLECTION TUBE

SIZE: The exhibit should be provided on a molded ABS base of 12" x 12 & 2.7mm wall thickness MATERIAL: The exhibit contains a laser light, attached on to the base. A transparent acrylic rod - bent. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

33 Newton’s Disc

SIZE: minimum 103 mm x 103 mm x 103 mm MATERIAL: The exhibit should consist of an ABS molded plastic case of minimum 103 mm x 103 mm x 103 mm in size having minimum 1 mm wall thickness. ABS molded disc of minimum diameter 100 mm, metal/plastic rod ABS molded ring of minimum diameter 35 mm, thread, Newton’s Disc template & other necessary fittings. While pulling the thread Rod should spin along with the disc. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 77 of 145

34 BENHAM’S DISC

SIZE: minimum 103 mm x 103 mm x 103 mm MATERIAL: The exhibit should consist of an ABS molded plastic case of minimum 103 mm x 103 mm x 103 mm in size having minimum 1 mm wall thickness. ABS molded disc of minimum diameter 100 mm, metal/plastic rod ABS molded ring of minimum diameter 35 mm, thread, Benham’s Disc template & other necessary fittings. While pulling the thread Rod should spin along with the disc. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an applicationfor seeing conceptual video

35 MULTIPLE REFELECTION OFLIGHT

SIZE: 120 mm x 240 mm x 120 mm MATERIAL: This exhibit should consist of 2 mirrors 120 mmx 120 mm x 2.7mm. Both the mirrors should be attached to each other such that the angle between them can vary from 0 to 180 degree. A base depicting the angle 0 to 180 degree should be provided. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

36 ANTI GRAVITY TUBE

SIZE: Minimum – ID 20 mm / OD – 38 mm & length 305 mm Material - Both the ends of this Aluminum tube/pipe should be close with the transparent end caps. It must have 1 neodymium disc magnet inside. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video

37 THE ODD DINING TABLE

SIZE: The working model provided in a molded ABS casing of size: 150 mm x 200 mm x 150 mm and 2.7mm wall thickness. MATERIAL: The exhibit should consist of two mirrors properly fixed inside the protective plastic molded casing. A colorful printed template of a dining table provided. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

38 REFLECTION AND TRANSMISSION

SIZE: The working model provided in a molded ABS casing of size: 150 mm x 200 mm x 75 mm and 2.7mm wall thickness. MATERIAL: The exhibit should consist of templates, 1 way film & other necessary fittings. A viewport provided in the front. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 78 of 145

39 LATERAL SHIFT

SIZE: minimum 65 mm x 305 mm x 190 mm MATERIAL: This exhibit should consist of 5 identical metal rods powder coated/ plastic rod in different colors, a metal / plastic frame as stand to hold the rods in vertical position and a viewing piece in ABS molded plastic body made using prisms in such a way that the vision is shifted laterally by 15 to 20 degrees. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

40 ANGLE OF VISION

SIZE: 304mm x 608mm x 25 mm

MATERIAL: This exhibit should consist of a 0 to 180 degree angle template stuck on a minimum 2.5 mm PVC/Sun-board base, a fixed acrylic pointer and a movable acrylic pointer & other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

41 SATELLITE MODEL

SIZE: 4” x 16” x 12” MATERIAL: This article should be made of ABS molded Packages & other necessary fittings. Side flaps should be movable. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

42 Law of Inertia

SIZE: Minimum – 150 mm x 200 mm x 235 mm Material: This working model should have 1 ABS molded pivot along with the metal bearing fixed in/on it. Special shape arc should be fitted on the pivot bearing. This arc should be transparent & have two minimum 6 mm balls in it. While spinning the arc each ball should move to opposite directions. This arc should be made of ABS plastic. This whole assembly should be placed on the 200 mm x 150 mm ABS molded base; base must have minimum 2.7 mm thickness. A conceptua chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

43 HAND POWERED GENERATOR

SIZE: The model should be provided on a molded ABS base of size: 286 mm x 150 mm, and 2.7mm wall thickness. It also has a molded bottom casing to encase electrical connection and/or mechanism if needed.

MATERIAL: This exhibit should consist of a wheel with handle for rotation, LED, dynamo type motor, ABS molded pulley on motor shaft 1” GI clamp, long lasting PVC O-ring, / rubber, model of a house, ABS molded bracket. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 79 of 145

44 Human joints

SIZE: 12” x 20” x 6”

MATERIAL: This exhibit should consist of ball joint, hinge joint pivot joint. It should be made of Acrylic, 100 mm HDPE molded ball, pipes & other necessary fittings. Whole assembly should be fix on 12” x 20” ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

45 MAGNETIC FIELD VIEWER

SIZE: The model provided with a molded ABS casing of size: 12" x 12" x 3"and 2.7mm wall thickness. It also has a molded bottom casing to encase electrical connection and/or mechanism if needed. MATERIAL: This exhibit should consist of disc magnet, horseshoe magnet, ring magnet, bar magnet, iron filings with case & other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

46 SIMPLE PENDULUM

SIZE: 12" x 12" x 3"

MATERIAL: The exhibit should consist of a metal frame 12” x 7” x 18” made in 8mm square section MS rod with powder coating. A metal bob with hook attached to the frame by a thread. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

USE: This working model should consist of a simple pendulum which used to explain what a pendulum is, its time period, amplitude, frequency and oscillations.

47 PENDULUMS OF VARYING LENGTH

SIZE: 12" x 7" x 18"

MATERIAL: The exhibit should consist of a metal frame 12” x 7” x 18” made in 8mm square section MS rod with powder coating. Three metal bobs with hook attached to the frame by individual threads. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

48 SYMPATHETIC

PENDULUMS

SIZE: 12" x 7" x 18"

MATERIAL: The exhibit should consist of a metal frame 12” x 7” x 18” made in 8mm square section, MS rod with powder coating. Two metal bobs with hookattached to a metal/plastic rod, by individual threads. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 80 of 145

49 WINDMILL

SIZE: 200 x 150 x 210

MATERIAL: This exhibit should consist of a dynamo motor, plastic propeller,

2.5 V 10mm Dome LED, mini bulb holder, electrical wires & ABS molded bracket of size160 mm x 55 mm having minimum 2.5 mm thickness. Whole assembly should be fix on 200 mm x 150 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that islinked to an application for seeing conceptual video.

50 K.E. - P.E. WHEEL SIZE: 12" x 7" x 18"

MATERIAL: This exhibit should consist of a metal frame with base having a wheel hung with threads. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

51 MARBLE RACE

SIZE: 305mm x 500 mm x 75 mm

MATERIAL: This exhibit should consist of two metal frame slides, one with constant slope and one with varying slope attached on a base made of ABS of size 305 mm x 500 mm having minimum 2.5 mm thickness & two 25mm marbles. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

52 Force and types – FRICTION

Size: 12” x 20” x 3”

Material - This exhibit should contain metal ramps, marbles, Velvet cloth sandpaper. Whole assembly should be fixed on 12” x 20” ABS molded base Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 colour prin having a QR code that is linked to an application for seeing conceptual video.

53 TORNADO

SIZE:305mm x 305mm x 620mm and 2.7mm wall thickness

MATERIAL: This exhibit should be made of ABS plastic. It should contain ABS molded jar of minimum diameter 199 mm & has length 390 mm. This jar should be packed from 1 side having 1 hole at center & other end open, this jar should be transparent. Another ABS molded jar of minimum length of 199 mm it must have arrangement for holding the transparent jar, base legs, pump motor & water outlet. 2 pin plugs with minimum 1.5 meter wire. ABS moldedcap of minimum diameter 220 mm & 2.5 mm thickness, pipe, switch. The exhibit should be watertight. A conceptual chart in Hindi/English


Page 81 of 145

language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

54 MAGNETIC EFFECT OF ELECTRIC CURRENT WITH GALVANOMETER


MATERIAL: The exhibit should consist of 2 ABS plastic molded spools with stand having 26 SWG copper wire wound on them with lengths in 2:1 ratio and properly fixed on the ABS molded case of minimum size 100 mm x 127 mm x 127 mm having minimum 1mm thickness. A galvanometer, magnet, electrical connectors should be provided. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

55 WAVE MOTION WITH PENDULUM

SIZE: 13” x 7” x 12”

MATERIAL: This exhibit should consist of a metal frame 13” x 7” x 12" made in 8mm square section MS rod, 9 metal bobs with hook and suspended using thread. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

56 IMMISCIBLE FLUIDS

SIZE: 295 mm x 295 mm x 100

MATERIAL: This exhibit should consist of plastic tubes, properly fixed on a ABS molded plastic base of size 295mm x 295mm with spinning mechanism. The exhibit should be leak proof. A conceptual chart in Hindi/English language of minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

57 VOLUME VS DENSITY

SIZE: 10" cube, 5" cube

MATERIAL: This exhibit s houl d consist of two metal boxes one of 10” cu and other 5” cu, both having handles to lift & weight. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 82 of 145

58 DNA MODEL

SIZE: 200 mm x 150 mm x 210 mm MATERIAL: This exhibit should consist of a model of DNA structure made of ABS molded rods, aluminum strips & other necessary fittings. Whole assembly should be fix on 200 mm x 150 mm ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

59 HALF ASSUMPTIONS

SIZE: 12” x 18”

MATERIAL: This exhibit should consist of a vinyl sticker template stuck on minimum 2.5 mm PVC/Sun board/acrylic. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

60 DEPTH PERCEPTION – NEAR AND FAR

SIZE: The model should be provided with a molded ABS casing of size: 12 x 6”x 3” and 2.7mm wall thickness. It also has a molded bottom casing to encase electrical connection and/or mechanism if needed.

MATERIAL: This exhibit should consist of two movable rectangular pieces inside a protective plastic molded casing with a view port in front. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

61 FINDING LATITUDE USING POLE STAR

SIZE: 305mm x 305mm x 127mm and 2.7mm wall thickness.

MATERIAL: This exhibit should consist of ABS molded plastic dome having minimum 10” diameter & 5” deep along with minimum 15 mm rim outside, dome must have minimum 2.5 mm thickness & transparent. Rod/pipes & other necessary fittings should be provided. Whole assembly should be fixed on 12” x 12” ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour

print having a QR code that is linked to an application for seeing conceptual video.

62 MEASUREMENT OF SIZE OF EARTH

SIZE: 305mm x 305mm x 127mm and 2.7mm wall thickness.

MATERIAL: This exhibit should consist of ABS molded plastic dome having minimum 10” diameter & 5” deep along with minimum 15 mm rim outside, dome must have minimum 2.5 mm thickness & transparent. Rod/pipes & other necessary fittings should be provided. Whole assembly should be fixed on 12” x 12” ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in


Page 83 of 145

Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

63 HORIZON OF EARTH

SIZE:305mm x 305mm x 127mm and 2.7mm wall thickness.

MATERIAL: This exhibit should consist of ABS molded plastic dome having minimum 10” diameter & 5” deep along with minimum

15 mm rim outside, dome must have minimum 2.5 mm thickness & transparent. Rod/pipes & other necessary fittings should be provided. Whole assembly should be fixed on 12” x 12” ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart inHindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video

64 WEIGHT ON DIFFERENT PLANETS

SIZE: 29” x 10” x 13”

MATERIAL: This exhibit should consist of 9 containers representing the planets of our Solar system, 9 ABS molded rings of diameter 35 mm with smooth edges, 4mm thread/Rope for each of the container, all on a powder coated metal pipe/Rod frame of size 29” x 10” x 13”. Relevant weights should be placed inside the boxes. A vinyl background and a conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

65 ALL ROADS LEAD TO DELHI

SIZE: minimum 515 mm x 385mm x 19mm MATERIAL: This exhibit should be fully made of ABS plastic in 1 piece & having minimum 2.5 mm wall thickness. This consists of an elliptical board with two discs at the foci, one fixed and one movable. The movable disc should be like a carom board striker. Carom board powder must be provided along- with. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

66 ANGULAR MOMENTUMWHEEL

SIZE:16” diameter with wall fittings.

MATERIAL: This exhibit should consist of a metal frame, cycle wheel 16” in diameter, thin and strong nylon rope for hanging the wheel from a powder coated metal frame and wall fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 84 of 145

67 PINHOLE CAMERA

SIZE – 10” long

MATERIAL: This exhibit should consist of pipes, disc, sticker & other necessary fittings. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linkedto an application for seeing conceptual video.

68 FUNNY MIRRORS

SIZE:150 mm x 200 mm x 75 mm

MATERIAL: This exhibit should consist of two mirrors, one fixed in concave shape and other in convex shape. Each mirror should be fixed in ABS molded case of size 150 mm x 200 mm x 75 mm. Wall fitting should be provided if needed. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

69 DEPTH PERCEPTION DOLL

SIZE: The model s hould be provided with a molded ABS casing of size 12" 6" x 8"and 2.7mm wall thickness. It should also have a molded bottom casing to encase any mechanism, if needed

MATERIAL: This exhibit should consist of 3 Packages of a doll/boy template fixed inside the casing, a view port in the front. A conceptual chart in Hindi/English language of minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

70 DRIP IRRIGATION

SIZE: The working model is provided with a molded ABS casing of size: 12x 12” x 3” and 2.7mm wall thickness.

MATERIAL: This model should consist of artificial plants, water storage unit with a drip system attached to it. A conceptual chart in Hindi/English language of Minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

71 WEIGHT BALANCING SCALE

SIZE: 640mm x 162 mm x 305mm

MATERIAL: This exhibit should consist of a 640 mm wooden / plastic / Acrylic scale with holes , two sets of slotted weights with hook, a ABS molded bracket of size 55 mm x 160 mm, having minimum 2.5 mm thickness for balancing scale. Whole assembly should be fix on 12”x 12”ABS molded base. Base thickness should not be less than 2.7 mm. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an

application for seeing conceptual video.


Page 85 of 145

72 Measurement of physical quantities : Weighing Machine

Type : Model Material: plastic/- fiber, electronic. Accurate, very light weight and elegant. It uses AAA batteries and not the coin cell kinds. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

Use: This activity will help to understand how to measure various things.

73 PHASES OF MOON

SIZE: minimum 6.5” x 6” x 6” minimum

MATERIAL: This exhibit should consist of a various phases of moon in plastic /wood/ metal body along with other necessary fittings and turning mechanism. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to anapplication for seeing conceptual video.

74 SAND PATTERNS OF A COMPOUND PENDULUM

SIZE: 24" x 24" x 24"

MATERIAL: This exhibit should consist of a powder coated MS pipe frame of size 24" x 24" x 24", a pendulum weight with hollow cavity for sand 0r anyfine things attached to the frame using thin and strong nylon threads. A PVC/Sunboard /cloth provided at the bottom. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

75 THE IRONIC BORDER / COLOUR BOUNDARY

SIZE: 12"x18"

MATERIAL: This exhibit should consist of A3 vinyl sticker stuck on 2.5 mm PVC/Sunboard, two 2 feet ribbon. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that linked to an application for seeing conceptual video.

76 CONSTELLATIONS VIEWER

SIZE: The model provided with a molded ABS casing of size: 12" x 8” x 6"and 2.7mm wall thickness. It also has a molded bottom casing to encase electrical connection and/or mechanism, if needed

MATERIAL: This exhibit should consist of 28 cards – colour 220 gsm with illustration of Constellations and holes punched such that they can inserted in the plastic molded casing and viewed from the view port in the front. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 86 of 145

77 CIRCULAR TO OSCILLATORY

SIZE: 4" x 12" x 6"

MATERIAL: This exhibit should consist of a mechanism that converts circular motion to oscillatory motion provided in acrylic/plastic form. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

78 HUMAN SKELETON

Size : 5 ft. Material: The model of human skeletal system should consist of the body's bones and joints. A conceptual chart in Hindi/English language of MinimumA3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

79 PASCAL’S TRIANGLE

SIZE: 10" x 2" x 8"

MATERIAL: This exhibit should consist of 2” x 2” x 2” ABS moldedplastic boxes, numbered 1 - 9 units, numbered 2 – 1 unit, numbered 3 – 2 units, numbered 4 – 2 units, numbered 6 – 1 unit. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that linked to an application for seeing conceptual video.

80 NEWTON’ S CRADLE

SIZE:138mm x 163mm x 135mm

MATERIAL: This exhibit should consist of a metal frame with powder coating and 5 metal balls, hung from the frame such that they are just in contact with each other in a straight line. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

81 RESONANCE

SIZE: minimum 37 mm x 295 mm x 250 mm

MATERIAL: This exhibit should consist of 6 metal strips mounted on a solid wooden or metal stand such that when one of the strip is disturb and made to vibrate, it make the other strips resonate. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.


Page 87 of 145

82 MOMENT OF INERTIA

SIZE:15 cm x 6 cm x 20 cm – 1 units

MATERIAL: This exhibit should consist of two metal bars of T shape. The weight concentrated at the center of T joint on one of the metal bar whereas on the other T bar the weight at the edges. It powder coated. A conceptual chart in Hindi/English language of Minimum A3 size provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

83 LATERAL AND LONGITUDINAL WAVES

SIZE: 12" x 7" x 18"

MATERIAL: This exhibit should consist of a metal stand having a spring attached on one end and a lateral wave unit attached on the other end. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

84 HUMAN EYE MODEL

SIZE: 10 cm x 10 cm x 10cm

MATERIAL: This exhibit should consist of a human eye model made in plastic or fiber It having a moving mechanism for the eye-ball. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

85 HUMAN HEART MODEL

SIZE: 10 cm x 8 cm x 15 cm

MATERIAL: This exhibit made in fir or plastic and mounted in a wood/metallic stand. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

86 Sound - Transmission of Various types of sound waves. – Xylophone

Size: 130 mm x 200 mm ( minimum ) MATERIAL- wood and coated metal. A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeingconceptual video.


Page 88 of 145

87 Animal Cell

SIZE – minimum 210 mm x 305 x 15 mm

Material: Fiber/plastic fixed on a wooden/MDF frame with neat labelling or coding of various Packages of the cell. A conceptual chart in Hindi/English language ofMinimum A3 size should be provided in 4 colour print having a QR code that islinked to an application for seeing conceptual video.

88 Plant Cell

SIZE – minimum 210 mm x 305 x 15 mm

Material: Fiber/plastic fixed on a wooden/MDF frame with neat labelling or coding of various Packages of the cell. A conceptual chart in Hindi/English language ofMinimum A3 size should be provided in 4 colour print having a QR code that islinked to an application for seeing conceptual video.

89 HUMAN BRAIN

SIZE: 5” x 5” x 5”

MATERIAL: This exhibit a table top model of the human brain made in fibe A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application fo seeing conceptual video

90 PYTHAGORAS THEOREM 3


MATERIAL: The activity should consist of a Pythagoras model made in acrylic / plastic & fix on ABS molded base of size 305 mm x 305 mm having minimum 2.7 mm thickness and A conceptual chart in Hindi/English language of Minimum A3 size should be provided in 4 colour print having a QR code that is linked to an application for seeing conceptual video.

Package B (SCIENCE KITS & Charts)

SCIENCE BOX -1 : SIZE – 13” x 10” x 3.5” 91 MUSICAL BALLOON

SIZE: Packed in Common science box – 1

MATERIAL: This kit contain an assembled musical balloon set using a plastic cup,, hard plastic straw, good quality balloon, rubber band in such a way that when one brings the central tubes in contact with the balloon diaphragm and blows through the other tubes, it produce a musical note. Moving the central tubes up and down creates high and low pitch. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 89 of 145

92 BOTTLE OF BRAHMA


MATERIAL: This kit contain a bottle with a plastic tubes attached within. A hole marked near the neck of the bottle. A covering sleeve for hiding this hole provided. A plastic cup. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

93 DIY SUBMARINE


MATERIAL: The activity contain a plastic bottle, a ring / Disc magnet clear plastic food grade tubes of minimum length 400 mm, a small transparent cello tape and small piece of modelling clay. Should provide Assembled kit. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

94 LEAKY BOTTLE – AIR PRESSURE


MATERIAL: This kit should contain a bottle with 2 specifically marked holes, one near the base and one near the neck. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

95 BLOWING BALLOON IN A BOTTLE

SIZE: SIZE: Packed in Common science box – 1"

MATERIAL: This kit should contain 2 bottles, one of it having a marked hole near its neck. 2 good quality balloons provided. An A4 size instruction manua mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concep video.

SCIENCE BOX - 2 SIZE – 13” x 10” x 3.5”

96 TOOTH RACE BOARD GAME


MATERIAL: This kit should contain 2 board games that teaches students to count teeth and learn about their types in a playful manner. The game in Minimum A3 size with lamination and instruction manual. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Dies & tokens


Page 90 of 145

97 SAFETY RULES BOARD GAME

SIZE: Packed in Common science box – 2 MATERIAL: This kit should contain 2 board games that teach students about safety rules while outdoor in a playful manner. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tokens, dice.

98 SAVE THE SUN – BOARD GAME


MATERIAL: This kit should contain 2 board games that teach students about our Solar system in a playful manner. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tokens, dice.

99 PLANT NURSERY – BOARD GAME


MATERIAL: This kit should contain 2 board games that teach students abou plants in a playful manner. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colou print, having a QR code which is linked to a concept video. Use common materia i.e. tokens, dice.

100 DIRECTIONS MAP


MATERIAL: The activity should contain 2 board games. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tokens & dices.

101 THE 5 SENSES WHEEL

SIZE: Packed in Common science box 2 MATERIAL: This kit consist a printed, cut and assembled template of a five senses wheel on 220 gsm paper. An instruction manual mentioning the purpose and how to conduct the activity provided.


Page 91 of 145

102 SPIN TO READ – SECRET COMMUNICATION

SIZE: Packed in Common science box 2 MATERIAL: This kit consist a flat circular transparent base with printed message and a spinning disc on top with a gibberish message. The discs made of minimum 2mm clear acrylic or plastic. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

103 PHENAKISTOSCOPE

SIZE: Packed in Common science box 2 MATERIAL: It contains a printed template mounted on hardboard/Sunboard, a strip with holes with minimum length of 110mm, a rivet, a plain mirror with stand and a rubber bush with a minimum dia of 5mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video.

SCIENCE BOX - 3 SIZE – 13” x 10” x 3.5”

104 BALLOON ROCKET

SIZE: Packed in Common science box 3

MATERIAL: This kit should consist 5 sets of - a

template of a rocket, a balloon, 1 m thread roll

and a straw. An A4 size instruction manual

mentioning the purpose and how to conduct the

activity should be provided in Hindi/English, 4

colour print, having a QR code which is linked to

a concept video.

105 CHEMMI-RUMMY

SIZE: Packed in Common science box -3

MATERIAL: The activity should contain 51 cards of a minimum size of 50 x 75 mm of 270 gsm paper in 4 colour printing. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 92 of 145

106 ANIMALS’ ZOO – CARD GAME


MATERIAL: This kit should consist of a card game having 32 colourful cards of animals and their properties in a trump card game style. An A4 size instruction manual mentioning the purpose and how to conduct the activity shouldbe provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video.

107 MOON FLIP BOOK


MATERIAL: This kit should contain 31 cards flip book of the lunar cycle with each card of minimum 55mm x 105mm and 220gsm with soft lamination, held together with a binder clip. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

MY BODY POCKET CHART


MATERIAL: This kit should contain a made pocket chart of human body for – skeletal system, heart and blood vessels, nervous system, organ of the body and the outer appearance, folded into a pocket size chart – 220 gsm, colourful. Material should be provided to make 20 more such pocket charts. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

109 BODY PACKAGES BINGO GAME


MATERIAL: This kit should consist of a Bingo style body Packages game with tickets - 50, foldable cells bingo style, Bingo body Packages callout cards - 30 cards. An A4 size instruction manual mentioning the purpose and how to conduc the activity should be provided in Hindi/English, 4 colour print, having a QR codewhich is linked to a concept video.

110 GUESS THE STATE FLASH CARDS


MATERIAL: The activity should contain 29 cards of a minimum size of 145x 100 mm of 270 gsm paper in 4 colour printing. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 93 of 145

111 Guess the profession

SIZE: Packed in Common science box – 3 MATERIAL: The activity should contain 9 cards of a minimum size of 145 x 100 mm of 270 gsm paper in 4 colour printing. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

112 WHO AM I

SIZE: Packed in Common science box – 3 MATERIAL: The activity should contain 24 cards of a minimum size of 145mm x 100 mm of 270 gsm paper in 4 colour printing. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

113 RELATIONSHIPS QUIZ CARDS


MATERIAL: This kit should contain 32 quiz cards on relations of a family minimum size 100mm x 150mm. The cards colourful and print on 220 gsm paper. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

SCIENCE BOX – 4 SIZE – 13” x 10” x 3.5”

114 STATES OF MY COUNTRY JIGSAW

SIZE: Packed in Common science box 4 MATERIAL: This kit should contain 2 sets of Indian map jigsaw puzzle with minimum size 197 mm x 147 mm made using minimum 2.5 mm thick MDF/PVC or good quality hard board material. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 94 of 145

115 FOOD CHAIN JIGSAW


MATERIAL: The activity should contain 2 colour printed template of food chain pasted on a good quality MDF board/Sunboard/PVC/good quality hard board. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, havinga QR code which is linked to a concept video.

116 ANIMALS AT THE ZOO JIG-SAW


MATERIAL: This kit should contain 2 sets of: 197 mm x 147 size colou template of animal zoo jig-saw cut on Acrylic/MDF/ Sunboard / PVC. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

117 INSECTS JIGSAW


MATERIAL: This kit should contain 2 different insects jigsaw – colourful and cut in MDF/PVC/good quality hard board. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

118 ANIMALS JIGSAW


MATERIAL: This kit should contain 2 different animals jigsaw – colourful and cut in MDF/PVC/good quality hard board. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

119 BIRDS JIGSAW


MATERIAL: This kit should contain 2 different birds jigsaw – colourful andcut in MDF/PVC/good quality hard board. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 95 of 145

120 RESPIRATORY SYSTEM JIGSAW


MATERIAL: It contains a printed template pasted on MDF board/PVC or hardboard with machine cut finishing. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

121 SUN AND THE ZODIAC BAND


MATERIAL: This kit should consist a yellow ball representing the sun and a black card paper roll with print of the 13 zodiacs such that the roll forms a large circle. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

122 PLANETS CARD GAME


MATERIAL: This kit should contain 3 sets of minimum 20 cards of planet and celestial bodies cards made in laminated 220gsm card paper each card minimum 65mm x 85mm, game playing in quiz cards style. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

123 NUTRIPLAY

SIZE: Packed in Common science box – 4 MATERIAL: This kit should contain 3 sets of: 32 cards of food items and their nutritional value made in laminated 220gsm card paper each card minimum 65mm x 85mm, game playing in trump card style. An A4 sizeinstruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

Science box 5 SIZE – 13” x 10” x 3.5”

124 REFLECTION IN A PLANE MIRROR

SIZE: Packed in Common science box 5 MATERIAL: This experiment should consist of a plane mirror, a light source should be enclosed in a ABS molded case of size 70 mm x 70 mm x 210 mm having minimum 1 mm thickness also provide 1 ABS molded tray of size 95 mm x 230 mm x 25 mm deep having minimum 2 mm thickness and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 96 of 145

125 LAWS OF REFLECTION

Common Optics Box (for image refer item number 128)


MATERIAL: This experiment should consist of a plane mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

126 MULTIPLE REFLECTION IN MIRRORS AT AN ANGLE


SIZE: Packed in Common science box – 5 MATERIAL: This experiment should consist of 2 plane mirrors, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

127 MULTIPLE REFLECTION IN PARALLEL MIRRORS


SIZE: Packed in Common science box – 5’.

MATERIAL: This experiment should consist of 2-plane mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity shouldbe provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. USE: Using this activity the child can explained how light gets reflected when two plane mirrors are place parallel to each other.

128 NO INVERSION – PRINCIPLE OF PERISCOPE



MATERIAL: This experiment should consist of 2-plane mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

129 DISPERSION OF LIGHT


SIZE: Packed in Common science box – 5’.

MATERIAL: This experiment should consist of a prism, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 97 of 145

130 RECOMBINING LIGHT USING TWO PRISMS



MATERIAL: This experiment should consist of 2 prisms, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

131 ANGLE OF PRISM



MATERIAL: This experiment should consist of 1 prism, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

132 RAINBOW FORMATION



MATERIAL: This experiment should consist of a water drop, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is

linked to a concept video. 133 EYE DEFECTS ANDCORRECTION


SIZE: This activity is provided in a common optics box with of size 13’’ x11.2’’ x 6.5’’.

MATERIAL: This experiment should consist of a convex lens, a concavelens, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

134 LATERAL INVERSION


SIZE: Packed in Common science box – 5 .

MATERIAL: This experiment should contain of 2-plane mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 98 of 145

135 REFLECTION THROUGH RECTANGULAR BLOCK


SIZE: This activity provided in a common box with of size 13’’ x 11.2’’ x 6.5’’.

MATERIAL: This experiment should contain a rectangular glass slab, a light source and a white paper. The light source has a 12V AC to Dc power supply.An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QRcode which is linked to a concept video.

136 REFRACTION AND REFLECTION AT PLANE SURFACE


SIZE: Packed in Common science box – 5 MATERIAL: This experiment should contain a rectangular glass slab, a light source and a white paper. The light source hasa 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QRcode which is linked to a concept video.

137 REFRACTION THROUGH SEMICIRCULAR BLOCK Common Optics Box (for image refer item number 128)

SIZE: SIZE: Packed in Common science box – 5 MATERIAL: This experiment should contain a semicircular glass slab, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

138 CRITICAL ANGLE


SIZE: SIZE: Packed in Common science box – 5

MATERIAL: This experiment should contain a semicircular glass slab, a light source and a white paper. The light source has a 12V AC to Dc powersupply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

139

TOTAL INTERNAL REFLECTING PRISM


SIZE: Packed in Common science box – 5 MATERIAL: This experiment should contain a prism, a light source and awhite paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 99 of 145

140

FOCAL LENGTH OF CONVEX LENS


SIZE: Packed in Common science box – 5 MATERIAL: This experiment should consist of a convex lens, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

141

FOCAL LENGTH OF CONCAVE LENS Common Optics Box (for image refer item number 128)


MATERIAL: This experiment should consist of a concave lens, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

142 FOCAL LENGTH OF CONVEX MIRROR SIZE: Packed in Common science box – 5

MATERIAL: This experiment should consist of a convex mirror, a light sourceand a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct theactivity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

143 FOCAL LENGTH OF CONCAVE MIRROR Common Optics Box (for image refer item number 128)

SIZE: Packed in Common science box – 5 MATERIAL: This experiment should consist of a concave mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

144 FOCAL LENGTH OF CONVEX LENS USING PLANEMIRROR



MATERIAL: This experiment should consist of a convex lens, a plane mirror, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 100 of 145

145

FOCAL LENGTH OF CONVEX LENS - IMAGE AND OBJECT METHOD



MATERIAL: This experiment should consist of a convex lens, a light source and a white paper. The light source has a 12V AC to Dc power supply. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

146 CONVEX LENS AS A COMBINATION OF PRISMS Common Optics Box (for image refer item number 128)



147 CONCAVE LENS AS A COMBINATION OF PRISMS Common Optics Box (for image refer item number 128)




148 FINDING NORTH


MATERIAL: This kit should consist of a plastic molded base minimum 11cm x 11cm and a plastic pointer – 10 cm in height and a magnetic compass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material from other activity i. e magnetic compass, ABS base

149 MAGNETIC SPRING


MATERIAL: This kit should consist of an ABS plastic molded base plate of size 110mm x 110mm, 4 ferrite ring magnets and a thick straw. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. ABS base.

.


Page 101 of 145

150 DIY MAGNETIC COMPASS


MATERIAL: This kit contain a bar magnet, a needle, a soft foam piece of 30 mm diameter, a magnetic compass, and a paper cup. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use commonmaterial i.e. magnetic compass.

151 SUNDIAL


MATERIAL: This kit should consist of a base with a printed template of the sundial and A magnetic compass provided. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Usecommon material i.e. magnetic compass.

152 MAGNETIC EFFECT OF ELECTRIC CURRENT


MATERIAL: The activity contain a ABS plastic circuit board of minimum size 110 x 110 mm, 2 copper plated spring connectors, 2000 mm copper wire, an ABS plastic spool of dia 35 mm and a good quality compass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i. e magnetic compass

153 MAGNETIC CHOR POLICE


MATERIAL: This kit contain 2 sets of one ABS molded rectangular block of minimum 1” x 1” base and 2” height having a sticker/ print of robber on all sides and a magnet inside, one ABS molded rectangular block of minimum 1” x1” base and 2” height having a sticker/print of police on all sides and a magnet inside, such that the two blocks repel each other when brought near. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

154 LEVITATING PENCIL


MATERIAL: This kit should contain ring magnets and disc magnets, a ABS plastic molded base of size 180 mm x 80 mm and a pencil An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.



Page 102 of 145

155 STRUCUTURES – STICKS


MATERIAL: This kit should contain 20 wooden stakes, 3 foam sheet rings with holes for the 20 sticks. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups

156 STRUCTURES – PAPER CUPS


MATERIAL: This kit should consist a MDF/PVC/Sunboard of size minimum 15” x 15” x minimum 2.5 mm thickness (keep it outside of the box). An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups

157 PINWHEEL


MATERIAL: This kit should contain one assembled pinwheel using origami paper, thick straw and pin. An A4 size instruction manual mentioning thepurpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

158 PAPER CHROMATOGRAPHY


MATERIAL: It should contain a 4-colour sketch pen set and some standard qualitytissue paper. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups

159 SLIME BALL


MATERIAL: The activity should contain a plastic pipette of length 145 mm, 22ml synthetic glue, 10 gms borax powder and 2 ice cream sticks. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups, Borax powder, glue & pipet.


Page 103 of 145

160 MAGNETIC SLIME


MATERIAL: The activity should contain at least 10 gms borax powder, 10 grams iron filings, a neodymium magnet of size 10 x 12 mm, minimum 22 gms of standard glue and a paper cup. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups, Borax powder, glue & pipet

161 PING PONG BALL CUP CHALLENGE


MATERIAL: This kit contain of 2 sets of: 2 paper cups and a table tennis ball. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. paper cups

162 POTATO BATTERY


MATERIAL: The activity should contain a 600 mm long soft wire, 4 copper strips, 4 galvanized iron strips, 2 wires with alligator clips and a 1.5 V LED. An A4 size instruction manual mentioning the purpose and how to conductthe activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

163 LEMON BATTERY


MATERIAL: The activity should contain a 600 mm long multi thread soft wire, 4 copper strips, 4 galvanized iron strips, 2 wires with alligator clips and a 1.5 V LED. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. ( Use above common material )

164 GALILEO'S EXPERIENT - FREELY FALLING WEIGHTS


MATERIAL: The activity should contain at least 160 gms modeling clay, a table tennis ball and 2 marbles. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. plastic ball USE: This activity useful to explain the effect of gravity on freely fallingobjects.



Page 104 of 145

165 THE IMPOSSIBLE FOLD


MATERIAL: This kit should contain a made activity of the impossible fold using 220 gsm card papers. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. .

166 FRICTION BOOKS


MATERIAL: This kit should contain 2 notebooks of 100 pages, standard quality. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, havinga QR code which is linked to a concept video.

167 STRENGTH OF PAPER PILLAR


MATERIAL: This kit should contain 8 A5 size 220 gsm card papers, cellotape. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material. i.e. cello tape

168 WHICH ONE HAS MOREVOLUME


MATERIAL: This kit should contain 2 A5 size 220 gsm card papers, cellotape. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material. i.e. cello tape.

169 HEAT RESISTANT THREAD


MATERIAL: It contain a candle, a thread piece of length 1000mm and a plated metal hexagonal nut of min dia 4 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. candle.


Page 105 of 145

170 HEAT RESISTANT BALLOON


MATERIAL: It should contain a candle and at least 2 mid-sized balloons of good quality. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print,

having a QR code which is linked to a concept video. Use common material i. e candle,

171 BALLOON WARS

SIZE: Packed in Common science box – 8 MATERIAL: It should contain good quality balloons. They of 5colours and 5quantity of each & magnifying glass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should beprovided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

172 SCREAMING BALLOONS


MATERIAL: This should contain a balloon of good quality and a metal plated hexagonal nut of a min diameter of 4mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e.hexagonal nut

173 PAPER CIRCUIT

SIZE: Packed in Common science box – 8 MATERIAL: The activity should contain an LED, Pencil, sharpener, clips and paper. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

174 THE ODD MOBIUS STRIPS


MATERIAL: The activity should contain A5 size cards of minimum 170 gsm Papers. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.



Page 106 of 145

175 DANCING ACROBAT


MATERIAL: This kit should contain 2 sets of: 220 gsm card paper colour templates of dancing acrobat as well as human skeleton with holding stick. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Rivets.

176 STICK ANIMALS – MOVING BODY PACKAGES


MATERIAL: This kit should contain 2 sets of: printed template/cut outs of animal’s body Packages, rivets for connecting Packages together and stick to hold the assembly. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, havinga QR code which is linked to a concept video. Use common material i.e. Rivets.

177 THAUMATROPE


MATERIAL: This kit should contain 5 templates of thaumatrope, 5 straws. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

178 FISH AND TELL


MATERIAL: This kit contain 2 sets of: minimum 20 cards of different aquatic animals with u-clips attached 1 plastic molded/wooden fishing rod with a ring magnet attached by thread. A template provided for making a card paper fish tank. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

179 TWIN PLANES


MATERIAL: This kit should consist of card paper templates of airplanes and 1 meter flexible soft aluminium wire. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 107 of 145

180 FLEXAGON – FOOD CHAIN


MATERIAL: This kit should contain 1 made flexagon of food chain and 20 such templates with colourful print. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English,4 colour print, having a QR code which is linked to a concept video.

181 FLEXAGON – LIFE CYCLE OF A FROG

SIZE: Packed in Common science box – 9 MATERIAL: This kit should contain 1 made flexagon of life cycle of frog and 20 such templates with colourful print. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

182 FLEXAGON – LIFE CYCLE OF A BUTTERFLY


MATERIAL: This kit should contain 1 made flexagon of life cycle of butterfly and 20 such templates with colourful print. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

183 LIGHT IS NEEDED FOR PHOTOSYNTHESIS


MATERIAL: This kit should contain stickers with shape cut-outs like circle, square and star. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


184 K.E. P.E. BOUNCE


MATERIAL: The activity should contain 4 rubber balls of reducing diameter and a plastic rod of minimum length 120 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 108 of 145

185 PIERCING A BALLOON


MATERIAL: This kit should contain 20 good quality balloons and 20 pointed wooden sticks. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colourprint, having a QR code which is linked to a concept video.

186 PAPER CUP TELEPHONE


MATERIAL: This kit should contain 2 sets of: paper cup telephones having 2 paper cups attached together at the center of the base using thread and clips such that when two students are at opposite end, one speaking softly in the cup and other listening with the string taut, the listener able to hear the spoken words. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

187 PAN PIPES


MATERIAL: This kit should contain a plastic molded model of pan pipes. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. This box also should contain a Flute and a Whistle.

188 MUSICAL STRAWS


MATERIAL: This kit should contain one made musical straw and for making such extra 20 straws provided. The made musical straw has a V-shape cut at one of the end such that it produces a musical note when air is blown through it. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 109 of 145

189 GERMINATION OF SEEDS


MATERIAL: This kit should contain a packet of palak seeds, a packet of tomato seeds and 4 mini-pots/ plastic cups for planting the seeds. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

190 AIR IS NEEDED FOR PHOTOSYNTHESIS


MATERIAL: This kit should contain a zip lock bag and iodine solution in 20 ml bottle. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having aQR code which is linked to a concept video. Use common material i.e. iodine solution.

191 STARCH TEST FOR GREEN LEAVES


MATERIAL: This kit should contain iodine solution in 20 ml bottle. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. iodine solution.

192 STARCH TEST OF FOOD ITEMS


MATERIAL: This kit should contain a 20 ml bottle of iodine solution. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. iodine solution.


193 SIMPLE KALEIDOSCOPE


Material: colourful glass pieces, mirror, pipe. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use: object wheels or carousels rotating on an axis attached to the center of kaleidoscope can introduce shapes and colours into the kaleidoscope image


Page 110 of 145

194 JENGA


MATERIAL: This kit should contain a set of the Jenga game in wooden finish. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

195 POPSICLE STICK WHISTLE


MATERIAL: This kit should contain an assembled popsicle stick whistle using 2 popsicle sticks, 1 thick rubber band, thread/cello tape/rubber bands and 2 spacers. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

196 CLAY ANIMALS


MATERIAL: This kit should contain 2 sets of: Clay bars brown yellow black red, set of eyes, 1 plastic mold each of a land based animal, water based animal, air borne animal and an animal that can live both in water and on land. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

197 PULL TO READ – SECRET COMMUNICATION


MATERIAL: This kit should contain thick 20 pcs of good quality rubber bands which not break easily on stretching. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

198 THE SPINNING SPINDLE


MATERIAL: This kit should consist of 10 ice-cream sticks and 10 meter cotton thread. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.



Page 111 of 145

199 Properties of Air


Material: rubber, balloons, boat / Thermocol boat shape, straw. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

00 AIR CAN LIFT WEIGHT


MATERIAL: This kit should contain food grade clear plastic tube, attached with sealed clear plastic bag – 2 sets. An A4 size instruction manual mentioning2 the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

201 BALLOON CAR


MATERIAL: This kit should contain 2 sets of: a thin ABS molded plastic base strip with 4 ABS molded plastic wheels, a straw and good quality balloons. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

202 BALLOON BUGLE


MATERIAL: This kit should contain a balloon cut and connect to a pipe/ tube at one end and a plastic cup/cut bottle on the other end such that when one blows air into to it produces sound like a bugle. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

203 FLOATING BALL CHALLENGE

SIZE: Packed in Common science box – 12 MATERIAL: The activity should contain a straw of good quality with a minimum length of 205mm and dia of 5mm. It also has a Styrofoam/ Thermocol ball of minimum 35mm dia. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 112 of 145

204 BERNOULLI’S BAGS

SIZE: Packed in Common science box – 12 MATERIAL: This kit should contain 5 units of minimum 4 feet long plastic bags. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

205 CRYSTAL MODEL

SIZE: Packed in Common science box – 12 MATERIAL: The activity should contain plastic Packages to assemble a crystal structure. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

206 FLOATING RICE BOTTLES

SIZE: Packed in Common science box – 13 MATERIAL: This kit should contain 2 bottles of 200 ml filled with rice, 2 long wooden stakes. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. plastic bottles

207 TORNADO IN A BOTTLE


MATERIAL: This kit should contain two 200 ml bottles with a plastic molded twin cap with hole in the center such that both bottles can attached on opposite ends and the unit leak proof. 3 extra twin bottle cap connectors provided. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. plastic bottles

208 HEIGHT MIGHT


MATERIAL: The activity should contain 2 plastic bottles, caps, hard quality straws of minimum length 220 mm and at least 10gms food colour. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. plastic bottles.


Page 113 of 145

209 WATERFALL RACE


MATERIAL: The experiment should consist of 2 plastic bottles with its cap. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. USE: In this experiment one has to try and empty the bottles filled with water in two ways. One by swirling and inverting and the other by inverting directly. This explains how air pressure acts on the water that is moving out of the bottle. One will faster and the other slower. Use common material i.e. plastic bottles.

210 GENIE IN A BOTTLE


MATERIAL: This kit should consist a plastic bottle, 1 pipette, a hexagonal nut,a plastic/paper cup. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. plastic bottles.


211 REFLECTION OF LIGHT


MATERIAL: This kit should contain torch, plane mirror, 1 laser, protractor, and duster. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i. e torch, plane mirror, protractor, and duster.

212 MAGIC STRAW – STATIC ELECTRICITY


MATERIAL: This kit should contain two clear plastic straws, a thumb-stack. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

213 STATIC ELECTRICITY


MATERIAL: This kit should contain a plastic/acrylic scale and a woolen cloth/ thread. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. woolen cloth/ thread,scale.


Page 114 of 145

214 BALANCING NAILS


MATERIAL: This kit should contain 11 nails of 2” – non-rusting, a wooden/plastic base with a fixed nail. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English 4 colour print, having a QR code which is linked to a concept video.

215 Effects of Light : LIGHT TRAVELS IN A STRAIGHT LINE


Material: Duster, torch, small mirror, protractor. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Torch, duster, torch, small mirror, protractor, lesser.

216

Light & Shadow: i. Sources of Light, ii. How shadows form


Material: This activity contains ball, torch. Use common material i.e. Torch. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

217 Static Electricity: Temporary electric charge generated through various objects.


Material: Assembled model of electroscope which contain of plastic jar, aluminium wire, woolen cloth/ thread, Aluminum foil & bush. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code whichis linked to a concept video. Use common material i.e. woolen cloth/ thread, scale.

218 Simple Machines - To understand the functions of Lever – Fulcrum Point


Material: This activity should contain forceps, clip, and tong. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 115 of 145

219 SMALL LIFTS HEAVY


MATERIAL: This kit should contain a plastic tube / pipe, a bird and an elephant template a thread. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

CHEMISTRY BOX 1 SIZE – 13” x 10” x 3.5”

220 RUSTING OF IRON NEEDS BOTH WATER & OXYGEN

SIZE - Packed in Common Chemistry box – 1 MATERIAL: The activity should contain a test tubes

stand of standard quality, 3 glass test tubes, 3 iron nails of minimum length 75mm, 2 dropper bottles of 10 ml, a rubber stopper, 3 plastic straws of length 205 mm. 5 test tubes of 100 mm length, 10 ml copper sulphate solution, a small piece of zinc, a thin strip of magnesium, 10gms of iron filings, 100 gms of baking soda, a transparent plastic container with cover of size 55 x 60 mm, 150 ml of vinegar, 10 gms of food colour and 10 ml of lime water. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

221 CO2& LIME WATER EXPERIEMENT( For image Refer item No. 224)

Material from above Chemistry box

SIZE - Packed in Common Chemistry box – 1

MATERIAL: An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

222 CuSO4& IRON FILINGS

Material from above Chemistry box( For image Refer item No. 224)

SIZE - Packed in Common Chemistry box – 1 MATERIAL: An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

223 DEPOSITION OF COPPER FROM ITS SALT SOLUTION


SIZE - Packed in Common Chemistry box – 1 MATERIAL: An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 116 of 145

224 BAKING SODA & VINEGAR EXPERIMENT WITH FOOD COLOUR



MATERIAL: An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

225 Element, Compounds and Mixtures:

Burning of magnesium.


Material: Magnesium ribbon, tong, candle, test tubes. Use common material i.e. test tubes. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

226 CHEMISTRY ROCKET


MATERIAL: The activity should contain a plastic bottle of minimum size 135 x 50mm, a rubber cork, and minimum 100 gms of baking soda, 150ml of vinegar, a standard piece of tissue paper, a hard quality straw and a regular rubber band. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i. e vinegar, baking soda, tissue paper.

227 WATERPROOF TISSUE PAPER


MATERIAL: This kit should contain a transparent test tube, tissue paper, pape cup and a 15 cm long wooden stick. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English 4 colour print, having a QR code which is linked to a concept video. Usecommon material i. e test tube, tissue paper.


228 LUNGS MODEL


MATERIAL: This kit should contain a plastic or glass jar with a Y – tube attached into its base and 2 balloons attached to the Y tubes. A rubber diaphragm attached to the mouth of the jar. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 117 of 145

229 THE BUZZING E


MATERIAL: This activity should contain 2 ice cream sticks, of size 10 x 110 mm, a standard quality rubber band and a chart paper of 85 x 85 mm size and some cotton thread of 1000 mm length. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

230 The Structure of an Atom

SIZE: Packed in Common science box – 15 Material: This activity should contain Atoms are of the correct relative sizes, with a scale of 2.5cm to 1 Angstrom. Includes a plastic box and instructions for building many different structures. Includes 51 total atoms and 35 links. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use: This activity will help to understand to understand atomic andmolecular structure in an element or compound.

231 Modes of heat transfer: Calorimeter

SIZE: Packed in Common science box – 15 Standard model of calorimeter should be provided. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to aconcept video.

SCIENCE BOX – 16 SIZE – 13” x 10” x 3.5” 232 ELECTRIC BUG


MATERIAL: The activity should contain a 3 pin toggle switch, a 3v battery holder, small piece two way tape, connecting wire, motor with vibrator, plastic/Acrylic base plate, aluminium wires for legs, cable ties, and a pair of eyes. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

233 ART BOT


MATERIAL: The activity should contain 4 sketch pens of small length, 1 wheel/acrylic, and plastic base with minimum 4 holes, one 3 pin toggle switch, and 3v battery holder, small piece of two way tape, connecting wire, and motor with vibrator, cable ties and a blank white paper. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 118 of 145

234 FOUR LEGGED WALKING TOY


MATERIAL: The activity should contain the following Packages of ABS plastic: base plate of size minimum 75 x 143 mm, 2 L shaped legs of size 105 mm, 2 Straight legs of 60 mm length, connecting logs of length 60mm, 2 cams of minimum length 20mm, 2 L clamps of 1 x 2, 2 standard cable tie, a 3 pin toggle switch, a 3v battery holder,100 mm of soft wire, 2 aluminium rivets of 3 x 40 mm, 4 aluminium rivets of 3 x 12 mm, 2 metal nutsand bolt, 2 screws of 4 x 8 mm, rubber bushes, 2 small pieces of two way tape and an I shaft BO motor with two way shaft. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

235 DOPPLER EFFECT


MATERIAL: This activity should contain a transparent plastic box of minimum size 25 x 45 x 85 mm, a standard quality 3 v buzzer, a rope of 1000mm, a metal plated round hook, 2 metal nut & bolts, a 3v battery holder and a wire of minimum 100 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

236 LED TORCH


MATERIAL: The activity should contain a transparent plastic box of minimum size 25 x 45 x 85 mm, a 3 pin toggle switch, a 3v battery holder, a 100 ohms resistor and 2 dome shaped LED’s of 2.5 v. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

SCIENCE BOX – 17 SIZE – 13” x 10”x 3.5” 237 FLOATING ASTRONAUT


MATERIAL: This kit should contain a made model of a floating astronaut using a printed template of an astronaut, a C shape wooden/MDF/plastic frame, a hook, thread, pin and a strong neodymium 8mm diameter disc magnet. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 119 of 145

238 FLOATING INDIAN ROCKET TO

MOON


MATERIAL: This kit should contain a made model of a floating rocket to moon using a printed template of a rocket, a wooden/MDF/plastic base, a hook,thread, pin and a strong neodymium 8mm diameter disc magnet along with other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

239 MAGNETIC FIELD VIEWER


MATERIAL: This kit should contain a plastic box of size 6.6" x 4.3" x 1.2" containing iron filings, a ring magnet, a disc magnet, a bar magnet 10mm x 23mm x 38mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print,having a QR code which is linked to a concept video. Use common material i.e. magnets.

240 FUN WITH MAGNETS


Material: This activity should contains 6 types of

magnets they are bar, horseshoe, ring, ball, oval, disk.

An A4 size instruction manual mentioning the purpose

and how to conduct the activity should be provided in

Hindi/English, 4 colour print, having a QR code which is

linked to a concept video. Use common material i.e.

magnets.


241 INVERTED GLASS OF WATER WITH CARD


MATERIAL: This kit should contain a hard glass, 10 gram food colour, a PVC/Sunboard sheet of 3” x 3” size. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e.hard glass, food colour.

242 INVERTED GLASS OF WATER WITH CLOTH


MATERIAL: This kit should contain a hard transparent glass, 10 gram food colour, 4 rubber bands and a plain white cotton handkerchief/netted cloth An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. hard glass, food colour, cotton handkerchief/netted cloth.


Page 120 of 145

243 INVERTED BOTTLE OF WATER


MATERIAL: This kit should contain a 200ml plastic bottle with hole in cap and food colour. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. food color & bottle.

244 INERTIA CHALLENGE


MATERIAL: This kit should contain a hard plastic glass, a dummy metal coin and a card paper. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. hard plastic glass, dummy metal coin.

245 CLOTH SIPHON


MATERIAL: This kit should contain 2 plastic/ paper cups and a cotton handkerchief. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. cotton handkerchief, glass.

246 DANCING COIN


MATERIAL: This kit should contain a glass bottle, a dummy metal coin. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. dummy metal coin.


Page 121 of 145

247 SOAP AND TURMERIC TEST


MATERIAL: This kit should contain at least 50 grams of powdered turmeric, a 60 grams soap bar and a cloth piece of the size of a standard handkerchief. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. handkerchief.

248 FLOATING AND SINKING LEMONS

SIZE: Packed in Common science box – 18 MATERIAL: This kit should contain 2 transparent plastic glasses, a plastic spoon of size 90 mm and minimum of 100 gm common salt. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. glass.

USE: This activity is useful to explain to the child why lemons float in water and why they sink when salt is added to the same water. It is useful to explain the concept of density. Use common material i.e. transparent plastic glasses.

249 MAGIC MARBLE THROUGH THE COIN


MATERIAL: This kit should contain a good quality plastic bottle, a marble of minimum size 15mm, a chart paper of minimum size 15cm x 15cm and a metal coin. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. dummy metal coin. Plastic bottle.

250 STRAW SPRINKLER


MATERIAL: This kit should contain a triangular hollow tube with a handle a the center and a hard plastic glass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. hardplastic glass.

251 REFRACTION TRICKS - BROKEN PENCIL & DISAPPEARING COIN


MATERIAL: The activity should contain a transparent plastic glass; a standard pencil and a coin of minimum dia 25 mm. Use common material i.e. dummy metal coin. Plastic glass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 122 of 145

252 FINDING OF LIGHT USING WATER BOTTLE AND LASER


MATERIAL: It activity should contain a plastic bottle, plastic glass and a good quality laser light. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Plastic bottle, plastic glass.

253 SECRET SIPHON


MATERIAL: The activity should contain a thin plastic straw of minimum 180 mm length, a thick plastic straw of minimum 200 mm length, a plastic glass. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Plastic glass.

254 DENSITY TOWER - 3 LAYERS


MATERIAL: The activity should contain at least 50gms sugar, a plastic pipette of minimum 145 mm length, Test tube from common chemistry box, 3 plastic glass and 2 different food colours. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. Plastic glass, test tube & food color, and pipette.


255 Water filtration


Type: Activity to prepare by teacher.

Material: This activity contains activated carbon, granite, filter papers, 3 Plastic containers. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

SCIENCE BOX – 20 Size: 12” x 20” x 4”

256 ELECTROMAGET


Material & Size: This activity should contain ABS molded base of minimum size 11 cm x 11 cm, copper wire, steel / metal nail & other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use: An electromagnet is a type of magnet in which the magnetic field is produced by an electric current. The magnetic field disappears when the current is turned off.


Page 123 of 145

257 CHANGE IN EFFORT DUE TO CHANGE IN PIVOTPOSITION


MATERIAL: This kit should consist of a plastic base and supports which act as fulcrum for a lever. The lever height as well as fulcrum position must adjustable. A small weight attached to the lever. Base should be ABS molded of minimum size 11cm. X 11 cm having minimum 2 mm thickness. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

258 SIMPLE CIRCUITS - BULB WITH SWITCH


MATERIAL: This activity should contains a circuit board made of ABS plastic of a minimum size of 110 x 110 mm, 3 copper plated spring connectors, a brass strip with a hole, a good quality bulb along with holder, 3 nuts and bolt of plated metal and a soft wire of minimum length 200mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

259 ELECTRIC CONDUCTIVITY OF FLUIDS


MATERIAL: The activity should contain a circuit board made of ABS plastic of minimum size 110 x 110 mm, 5 copper plated spring connectors, 2 banana pins, , a plastic beaker, 30 cm of multi thread soft wire and 1.5 v red LED & other necessary fittings q. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

260 SIMPLE CIRCUITS – CONDUCTORS AND INSULATORS


MATERIAL: This activity should contains a circuit board made of ABS plastic of a minimum size of 110 x 110 mm, copper plated spring connectors, a good quality bulb and plastic holder, 2 nuts and bolt of plated metal, a soft wire of minimum length 200mm, a piece of straw, a wooden piece and small pieces of nichrome, copper and aluminium wires. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

261 SIMPLE TELEGRAPH


MATERIAL: The activity should contain a circuit board made of ABS plastic of minimum size 110 x 110 mm, 3 copper plated spring connectors, a brass plated metal/ brass l strip with hole, a 3V buzzer, 3 nuts and bolts, soft wire.An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 124 of 145

262 DC MOTOR


MATERIAL: The activity should contain a plastic cell holder for a jumbo battery, 2 brass strips with a hole, 2 nuts and bolts, a metal spring, copper wire, an ABS plastic spool, of minimum dia 35 mm and ferrite disc magnet of minimum dia 25 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

263 WORKING OF LEDS


MATERIAL: The activity should contain a circuit board made of ABS plastic of minimum size 110 x 110 mm, 4 copper plated spring connectors, 2 metal nut and bolts, a bulb, a plastic bulb holder, 20 cm of soft wire and LED. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

SCIENCE BOX – 21 Size: 12” x 20” x 4”

264 CATAPULT


MATERIAL: This kit should contain 1 made models of catapult made in ABS molded plastic such that it can move ahead/back using 4 plastic ABS molded wheels attached on 2 metal shafts 3mm diameter x 90 mm length. A launcher with O-ring and clay ball provided. The launcher attached to a thick rubber band along with other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

265 HYDRAULIC JACK


MATERIAL: The activity should be made of ABS molded plastic, a 10 ml plastic syringe, a 5 ml plastic syringe, wire ties, 1 clear plastic food grade quality tube of minimum length, some rubber bushes & other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

266 HYDRAULIC EXCAVATOR


MATERIAL: The model should be made of ABS molded plastics, 10 ml plastic syringe, 5 ml plastic syringe, metal round hooks, shafts, clear plastic food grade quality tube, some rubber bushes & other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 125 of 145

267 MAGIC ROLL BACK CAN


MATERIAL: This kit should contain ABS molded cylinder of minimum 100 mm diameter & 100 length with a nut and rubber band attached inside such that the can roll back when rolled ahead. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

SCIENCE BOX – 22 SIZE: 12” x 20” x 4”

268 BLOWING OUT CANDLE THROUGH glass / bottle


MATERIAL: This kit should contain a candle, a transparent cylindrical glass, a rectangular block. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. glass, candle.

269 SOUND GUN


MATERIAL: This kit should contain a hollow tube with drum/dhol / plastic glass & diaphragm/balloon on one end and the other end open. Incense sticks provide for creating smoke. Upon hitting the diaphragm the pipe/glass produce sound as well as smoke rings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

270 KABHIE SOLID KABHIE LIQUID


MATERIAL: The activity should contain a minimum of 100 gms corn starch powder and a medium plastic bowl. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

271 SUBSTANCES IN SUROUNDINGS - THEIR STATES & PROPORTIES


Name of The Experiment: Heat & change of physical state

Type: Activity to prepared by teacher

Material: This activity should contain 2 lab thermometers, 2 – 50 ml beakers, and heating source. Use common material i.e. lab thermometers. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 126 of 145

272 Measurement Of physical quantities: Measuring Units

SIZE: Packed in Common science box – 22 Material: Lab thermometer, thermometer, digital thermometer, measuring cylinder. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, havinga QR code which is linked to a concept video.

Use: This activity will help to understand how to measure various things in various objects, like temperature. Use common material i.e. Lab thermometer.

273 Heat: Modes of heat transfer: Conduction

SIZE: Packed in Common science box – 22 Type : activity to prepared by teacher

Material: Iron strip with wooden handle, 5 pins, wax, heat source. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

Use: This activity will help to understand conduction of heat takes place through solid substances, shows that a medium id required for the conductionof heat. Use common material i.e. candle

274 WATER RISING IN CUP


MATERIAL: This kit should contain a birthday candles, hardquality plastic plate minimum 5” in diameter, 10 gram food colour, glass (glass – not plastic). Use common material i.e. glass, candle. Plate An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

275 Modes of heat transfer: Expansion

and Contraction of a solid substance

SIZE: Packed in Common science box – 22 Type : Model - activity to prepared by teacher

Material: A metal ball, a metal ring, heating source. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e.candle.

Use: This activity will help to understand that metals expand on heating and contract on cooling.

276 JAL TARANG


MATERIAL: This activity should contain 7 glasses made of good quality glassware, a spoon and 10 grams of food colour. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. glass, food color.


Page 127 of 145

277 PEPPER TRICK


MATERIAL: The activity should contain 75 gms of detergent soap, 100 gmsof standard black pepper powder, a hard plastic plate. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to aconcept video. Use common material i.e. plate. .

SCIENCE BOX – 23 Minimum 12.5” x 9.5” 5.5” 278 3D BALL FOR SOLAR SYSTEM WITH

ACRYLIC PAINT AND PAINTBRUSH


MATERIAL: This kit should contain 100 mm HDPE Molded ball,80 mm HDPE molded ball this ball must have 1 grove on it for fixing the ring, 150 mm HDPE molded ball, 35 mm HDPE molded ball, 12 mm, 3.5 mm & 5 mm ball of planets of our Solar system, Mercury, Venus, Earth, Mars, Jupiter, Saturn with rings, Uranus, Neptune and Pluto & sun. The planets nearly the actual ratio of their sizes. A set of acrylic paint and paintbrush, plastic ring for Saturn provided. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

279 The Muscular system and digestive system in Human ings -Teeth

human teeth MATERIAL – Plastic / fiber. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

Use: It helps to understand 4 types of teeth in human body.

280 ALUMINUM ROD - NODES AND ANTINODES

SIZE: 3 FT, 8 MM DIA

MATERIAL: This kit should consist a 8 mm diameter and 3 ft. long aluminium rod and roslin powder. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

281 Substances in daily use

Size: A3 – PVC board

Type: Chart with materials. 6 substances - cotton, wool, jute rope, plastic, polyester, nylon. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video.


Page 128 of 145

CHARTS –CONTRIBUTORS OF SCIENCE

335 Johannes Kepler 18” x 24” – 4 colour print – Hindi/English

336 Sushrut 18” x 24” – 4 colour print – Hindi/English

337 Aryabhata 18” x 24” – 4 colour print – Hindi/English

338 Varahmihira 18” x 24” – 4 colour print – Hindi/English

339 Brahmagupta 18” x 24” – 4 colour print – Hindi/English

340 Nagarjuna 18” x 24” – 4 colour print – Hindi/English

341 Bhaskaracharya 18” x 24” – 4 colour print – Hindi/English

342 Raja Sawai Jai Singh 18” x 24” – 4 colour print – Hindi/English

343 Srinivasa Ramanujan 18” x 24” – 4 colour print – Hindi/English

344 Jagdish Chandra Bose 18” x 24” – 4 colour print – Hindi/English

345 Prafulla Chandra Roy 18” x 24” – 4 colour print – Hindi/English

346 Homi Jahangir Bhabha 18” x 24” – 4 colour print – Hindi/English

347 Vikram Sarabhai 18” x 24” – 4 colour print – Hindi/English

348 Albert Einstein 18” x 24” – 4 colour print – Hindi/English

349 Sir C V Raman 18” x 24” – 4 colour print – Hindi/English

350 Satyendra Nath Bose 18” x 24” – 4 colour print – Hindi/English

351 Subrahmanyan Chandrashekhar 18” x 24” – 4 colour print – Hindi/English

352 Edwin Hubble 18” x 24” – 4 colour print – Hindi/English

353 Baudhayana 18” x 24” – 4 colour print – Hindi/English

354 Charak 18” x 24” – 4 colour print – Hindi/English

355 Rishi Kanad 18” x 24” – 4 colour print – Hindi/English

356 Galileo Galilei 18” x 24” – 4 colour print – Hindi/English

357 Isaac Newton 18” x 24” – 4 colour print – Hindi/English

358 Nicolaus Copernicus 18” x 24” – 4 colour print – Hindi/English

359 Charles Darwin 18” x 24” – 4 colour print – Hindi/English

Package C (MATHEMATICS KITS & various Charts)

MATHS BOX 1 SIZE – 13” x 10” x 3.5”

282 A(B + C) = AB + AC

SIZE: Packed in Common Math’s box – 1

MATERIAL: The activity should contain 2 rectangular pieces, 1 square piece in plastic or 5 mm Eva / acrylic and ABS molded tray of size 206 mm x 129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use


Page 129 of 145

common material i.e. tray.

283 SUM OF FIRST N NATURAL NUMRS


MATERIAL: The activity should contain 10 rectangular strips of varying length of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. A4 manual provided, and ABS molded tray of size 206 mm x129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray



MATERIAL: The activity should contain 4 congruent right triangles and square a tray machine cut in minimum 2.7 mm acrylic sheet / plastic. Or 5 mm eva and ABS molded tray of size 126 mm x 126 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray

285 (A + B)(C + D) = AC + AD + BC + BD


MATERIAL: The activity should contain 4 rectangular pieces and made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. And ABS molded tray of size 206 mm x 129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray

286 (A + B)^2 = A^2 + 2AB + B^2


MATERIAL: The activity should contain 2 square pieces and 2 rectangular pieces made of minimum 2.7 mm acrylic sheet / Plastic. Or 5 mm eva and ABS molded tray. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray


Page 130 of 145

287 (A+B)^2 + (A-B)^2 = 2A^2 +2B^2


MATERIAL: The activity should make of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. ABS molded tray of size 126 mm x 126 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colourprint, having a QR code which is linked to a concept video. Use common material i.e. tray

288 (A + B + C)^2 = A^2 + B^2 + C^2 + 2AB + 2BC + 2CA


MATERIAL: The activity should make of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. And ABS molded tray of size206 mm x 129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colourprint, having a QR code which is linked to a concept video. Use common material i.e. tray

289 (A+B)^2 - (A-B)^2 = 4AB

SIZE: Packed in Common Math’s box – 1 MATERIAL: The activity should contain a square piece, 4 pairscongruent rectangles made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. And ABS molded tray of size 126 mm x 126 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Usecommon material i.e. tray

290 SUM OF FIRST N NUMRS IN ARITHMETIC

PROGRESSION


MATERIAL: The activity should contain 10 rectangular strips ofvarying length made of minimum 2.7 mm acrylic sheet / plastic or5 mm eva. And ABS molded tray of size 126 mm x 126mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray

291 SUM OF FIRST N ODD NUMRS


MATERIAL: The activity contain 10 L strips of varying length made of minimum 2.7 mm acrylic sheet / plastic or 5 mmeva. AndABS molded tray of size 126mm x 126mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray.



Page 131 of 145

292 (A^2 - B^2) = (A+B)(A-B)


MATERIAL: The activity should contain a square piece, 2 congruent trapeziums and a tray made of minimum 2.7 mm acrylicsheet / plastic, or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QRcode which is linked to a concept video.

293 AREA OF RHOMBUS


MATERIAL: The activity should contain Shape of rhombuscut in 4 equal Packages. Made of minimum 2.7 mm acrylic sheet/plastic, or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR codewhich is linked to a concept video.

294 AREA OF TRIANGLE 1


MATERIAL: The activity should contain a trapezium and 2 rightangled triangles made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. The size of the complete triangle at least 140 x 149 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a conceptvideo.

295 AREA OF TRIANGLE 2


MATERIAL: The activity should contain a 5 sided polygon

and2right angled triangles made of minimum 2.7 mm acrylic sheet

/ Plastic or 5 mm eva. An A4 size instruction manual

mentioningthe purpose and how to conduct the activity

should be provided inHindi/English, 4 colour print,

having a QR code which is linked to a concept video.

USE: This activity able to help the child understand that

area of atriangle = ½ base x height. 296 AREA OF PARALLELOGRAM


MATERIAL: The activity should contain a trapezium and 1 rightangled triangle made of minimum 2.7 mm acrylic sheet / plastic, or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 132 of 145

297 AREA OF TRAPEZIUM


MATERIAL: The activity should contain 2 trapeziums made of minimum 2.7 mm acrylic sheet / plastic, or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct theactivity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

298 2 D GEOMETRICAL SHAPES


MATERIAL: The activity should contain machine cut piecesof minimum 2.7 mm acrylic in colour or 5 mm eva with following sizes: Square: 91 x 91mm, Rectangle: 49 x 108 mm,Circle: 81 mm, Triangle: 150 x 58 mm, Semi Circle: 100 x 50mm, Hexagon: 100 x 100, Pentagon: 99 x 99 mm, Parallelogram: 50 x 122 mm, convex pentagon: 140 x 65 mm, Ellipse: 58 x 117 mm. An A4 size instruction manual mentioning the purpose and how toconduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

MATHS BOX - 3 12.5” x 9.5” x 6”

299 3 D GEOMETRICAL SHAPES


MATERIAL: The activity should contain ABS molded 3D geometrical shapes namely pyramid, cylinder, cube, cuboid cone, diameter or any side of the any shape should not be less than 100 mm. An A4 size instruction manual mentioning thepurpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which islinked to a concept video.


300 (A + B)^3

SIZE: Packed in Common Math’s box – 2 MATERIAL: The activity should contain ABS molded Articles respectively – Cube of size 2”x 2” x 2 “, cube of size 1” x 1” 1”, cuboid of size 1”x2”x 1”, cuboid of size 2” x 2” x 1” represent theexpansion formula for (a+b) ^3. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 133 of 145

301 SET OF TRIANGLES

SIZE: Packed in Common Math’s box – 2 MATERIAL: The activity should contain 25 triangular pieces machine cut in minimum 2.7 mm acrylic or 5 mm eva of the following sizes: 62 x 62 x 35 – 2pcs, 32 x 73 x 59 mm – 2pcs, 31 x 73 x 63 mm – 6pcs, 37 x 62 x 37 mm – 14 pcs, 50 x 90 x 71 mm – 1pcs, 50 x 50 x 50 mm – 1 pcs, 44 x 44 x 44 mm – 1 pcs, 48 x 31 x 37 mm – 1 pcs, 48 x 42 x 24 mm – 1 pcs. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

302 SUM OF ANGLES OF A QUADRILATERAL


MATERIAL: The activity should contain 4 quadrilaterals made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

303 TWO CONGRUENT RIGHT TRIANGLES


MATERIAL: The activity should contain 2 congruent right triangular pieces and a tray with different shapes made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

304 NUMR PUZZLE GAME - ARRANGE 1 TO 8

SIZE: Packed in Common Math’s box – 2 MATERIAL: The activity should contain machine cut base of atleast 2.7 mm acrylic or 5 mm eva having size 134 x 165 mm, 1 - 8 number coins of at least 3 mm acrylic or 5 mm eva in colour. An A4 size instruction manual mentioning the purpose and howto conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

305 PLUG IN 3 HOLES


MATERIAL: The activity should contain a board machine cut inacrylic of minimum 3mm or 5 mm eva and a plug/piece that just passes through all holes. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 134 of 145

306 UNDERSTANDING PI

SIZE: Packed in Common Math’s box – 2 MATERIAL: all machine cut in minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


307 FRACTION STRIPS


MATERIAL: The activity should contain , a strip of 1 unit length, 2 strips of ½ unit length, 3, 4, 5….10 strips with lengthsof1/3, ¼, 1/5…. 1/10. And ABS molded tray of size 206 mm x 129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conductthe activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray

306 UNDERSTANDING PI

SIZE: Packed in Common Math’s box – 2 MATERIAL: all machine cut in minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


307 FRACTION STRIPS


MATERIAL: The activity should contain , a strip of 1 unit length, 2 strips of ½ unit length, 3, 4, 5….10 strips with lengthsof1/3, ¼, 1/5…. 1/10. And ABS molded tray of size 206 mm x 129 mm This tray should be minimum 2 mm deep. An A4 size instruction manual mentioning the purpose and how to conductthe activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use common material i.e. tray

308 EQUILATERAL TRIANGLE TO SQUAREPUZZLE


MATERIAL: The activity should contain three quadrilaterals and a triangle, of different colours. The size of the squarearound105 x 105 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linkedto a concept video.


Page 135 of 145

309 PENTOMINOES

SIZE: Packed in Common Math’s box – 5 MATERIAL: The activity should contain 12 pantomimes in 2.7 mm acrylic / hardboard / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conductthe activity should be provided in Hindi/English, 4 colour print,having a QR code which is linked to a concept video.

310 MID-POINT THEOREM SIZE: Packed in Common Math’s box – 5

MATERIAL: The activity should contain a triangle and a trapezium machine cut in minimum 2.7 mm acrylic sheet / Plasticor 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linkedto a concept video.

311 SUM OF ANGLES OF TRAINGLE WITHRESPECT TO SHAPE OF EDGE


MATERIAL: The activity should contain 3 triangles with size of100 x 100 x 100 mm machine cut in minimum 2.7 mm acrylic sheet/ Plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR codewhich is linked to a concept video.

MATHS BOX 6 SIZE – 13” x 10” x 3.5” 312 PARKING PUZZLE


MATERIAL: The activity should contain machine cut base tray 6 token of 2 different colors & other necessary fittings. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

313 PEGBOARD PUZZLE


MATERIAL: The activity should contain a base having 11 pins and 10 tokensof 2 different colors. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 136 of 145

314 SUM OF ANGLES OF A TRIANGLE


MATERIAL: The activity should contain 3 quadrilaterals made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activityshould be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

315 TOWER OF BRAHMA PUZZLE


MATERIAL: The activity should contain a base having 3 pins or shafts, 5 discs of reducing sizes. An A4 size instruction manual mentioning the purposeand how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

316 L.C.M

SIZE: Packed in Common Math’s box – 6 MATERIAL: The activity should contain machine cut acrylic or 5 mm eva pieces of the following sizes: 3 pieces of 14 x 210mm, 3 pieces of 14 x 180 mm, 4 pieces of 14 x 150 mm, 5 pieces of 14 x 120 mm, 7 pieces of 14 x 90 mm, 7 pieces of 14 x 60 mm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

317 TANGRAM PUZZLES


MATERIAL: This activity should contain tangram puzzle in minimum 2.5 mm acrylic or 5 mm eva or plastic. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


318 INTEGERS


MATERIAL: The activity should contain 24 square pieces. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 137 of 145

319 FACTORS

Reuse material of Integers kit ( For image refer item number 322)


MATERIAL: The activity should contain 24 square pieces in 2 different colours. Base & bottom color should not be the same. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

320 EVEN & ODD NUMRS



MATERIAL: The activity should contain 24 square pieces in 2 different colours. Base & bottom color should not be the same. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video.

321 TURN-TURN GAME



MATERIAL: The activity should contain 24 square pieces in 2 different colours. Base & bottom color should not be the same. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video.

322 ADDITION HUNT BOARD GAME


MATERIAL: The activity should contain a board game printed in 4 colour. Playing tokens/cards provided as needed. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use commonmaterial i.e. Playing tokens.

323 SUBTRACTION HUNT BOARD GAME


MATERIAL: The activity should contain a board game printed in 4colour.Playing tokens/cards provided as needed. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked toa concept video. Usecommon material i.e. Playing tokens.


Page 138 of 145

324 SUN SIGNS - FOUR IN A ROW


MATERIAL: The activity should contain a board game printed in 4 colours. Playing tokens/cards provided as needed. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use commonmaterial i.e. Playing tokens.

325 DIVISION TILES BOARD GAME


MATERIAL: The activity should contain a board game printed in 4 colours. Playing tokens/cards provided as needed. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video. Use commonmaterial i.e. Playing tokens.

326 NAPIER STRIPS


MATERIAL: The activity should contain Napier strips on MDF/PVC/Acrylic.An A4 size instruction manual mentioning the purpose and how to conduct theactivity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

327 ORIGIN OF THE NUMBERS & LOGIC OF

THERE SHAPES


MATERIAL: The activity contain placard of numbers 0 to 9 depicting their origin of shape. Each card 5” x 8” – on 220 gsm. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linkedto a concept video.


328 FIND THE BIGGER CURVE


MATERIAL: The activity should contain two identical curved strips made in3 mm acrylic/PVC/ any hard board. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 139 of 145


SIZE: Packed in Common Math’s box – 8 MATERIAL: The activity should contain a fixed right triangle and a squareon each of its sides to from a tray, 4 congruent quadrilaterals and 1 small square all machine cut in minimum 2.7 mm acrylic sheet / plastic or 5 mm eva.An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

330 ANGLE BISECTOR THEOREM


MATERIAL: The activity should contain 3 triangles and a triangular machine cut in minimum 2.7 mm acrylic sheet / plastic. Or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

331 MAKE A SQUARE OUT OF 3 PAIRS OF CONGRUENT PIECES


MATERIAL: The activity should contain 3 pairs of congruent pieces madeof minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code whichis linked to a concept video.

332 MAGIC HEXAGON


MATERIAL: The activity should contain 75 pieces of rhombus shapes madeof minimum 2.7 mm acrylic sheet / plastic. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

333 AD^2 = BDXDC


MATERIAL: The activity should contain 2 small triangles and a big triangular tray made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct theactivity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.


Page 140 of 145

334 FIBONACCI SERIES

SIZE: Packed in Common Math’s box – 8 MATERIAL: The activity should contain 7 pieces of sizes 130 x 130 mm, 80 x 80mm, 50 x 50 mm, 30 x 30 mm, 20 x 20 mm, 10 x 10 mm and 10 x 10mm made of minimum 2.7 mm acrylic sheet / plastic or 5 mm eva. An A4 size instruction manual mentioning the purpose and how to conduct the activity should be provided in Hindi/English, 4 colour print, having a QR code which is linked to a concept video.

CHARTS – CONTRIBUTORS OF MATHEMATICS 360 Rene Descartes 18” x 24” – 4 colour print – Hindi/English

361 D R Kaprekar 18” x 24” – 4 colour print – Hindi/English

362 R C Bose 18” x 24” – 4 colour print – Hindi/English

363 John Napier 18” x 24” – 4 colour print – Hindi/English

364 Galileo Galilei 18” x 24” – 4 colour print – Hindi/English

365 Fibonacci 18” x 24” – 4 colour print – Hindi/English

366 Varahmihira 18” x 24” – 4 colour print – Hindi/English

367 Bhaskaracharya 1 18” x 24” – 4 colour print – Hindi/English

368 Bhaskaracharya 2 18” x 24” – 4 colour print – Hindi/English

369 Brahmagupta 18” x 24” – 4 colour print – Hindi/English

370 Mahaviracharya 18” x 24” – 4 colour print – Hindi/English

371 Archimedes 18” x 24” – 4 colour print – Hindi/English

372 Aryabhata 18” x 24” – 4 colour print – Hindi/English

373 Pythagoras 18” x 24” – 4 colour print – Hindi/English

374 Euclid 18” x 24” – 4 colour print – Hindi/English

375 P C Vaidya 18” x 24” – 4 colour print – Hindi/English

376 A R Rao 18” x 24” – 4 colour print – Hindi/English

377 Isaac Newton 18” x 24” – 4 colour print – Hindi/English

378 G W Leibniz 18” x 24” – 4 colour print – Hindi/English

379 Leonhard Euler 18” x 24” – 4 colour print – Hindi/English

380 C F Gauss 18” x 24” – 4 colour print – Hindi/English

381 George Boole 18” x 24” – 4 colour print – Hindi/English

382 Albert Einstein 18” x 24” – 4 colour print – Hindi/English

383 Srinivasa Ramanujan 18” x 24” – 4 colour print – Hindi/English

384 Harish Chandra 18” x 24” – 4 colour print – Hindi/English

CHARTS – SPACE & UNIVERSE 385 Albert Einstein & E=mc^2 18” x 24” – 4 colour print – Hindi/English

386 Asteroids 18” x 24” – 4 colour print – Hindi/English

387 Charged solar Packageicles 18” x 24” – 4 colour print – Hindi/English

388 Chandrayaan 1 18” x 24” – 4 colour print – Hindi/English


Page 141 of 145

389 Comets 18” x 24” – 4 colour print – Hindi/English

390 Constellations of Southern hemisphere

18” x 24” – 4 colour print – Hindi/English

391 Constellations of Northern hemisphere


392 Milky way galaxy 18” x 24” – 4 colour print – Hindi/English

393 Galaxies 18” x 24” – 4 colour print – Hindi/English

394 Craters 18” x 24” – 4 colour print – Hindi/English

395 Lunar missions 18” x 24” – 4 colour print – Hindi/English

396 Moon 18” x 24” – 4 colour print – Hindi/English

397 Nebula 18” x 24” – 4 colour print – Hindi/English

398 Earth 18” x 24” – 4 colour print – Hindi/English

399 Jupiter & its moons 18” x 24” – 4 colour print – Hindi/English

400 Mars 18” x 24” – 4 colour print – Hindi/English

401 Mercury 18” x 24” – 4 colour print – Hindi/English

402 Neptune 18” x 24” – 4 colour print – Hindi/English

403 Saturn 18” x 24” – 4 colour print – Hindi/English

404 Uranus 18” x 24” – 4 colour print – Hindi/English

405 Venus 18” x 24” – 4 colour print – Hindi/English

406 Drawf planet - Pluto 18” x 24” – 4 colour print – Hindi/English

407 Solar system 18” x 24” – 4 colour print – Hindi/English

408 Sun 18” x 24” – 4 colour print – Hindi/English

409 Tropic of Cancer & Capricorn 18” x 24” – 4 colour print – Hindi/English

410 Universe 18” x 24” – 4 colour print – Hindi/English

411 Zodiac lt 18” x 24” – 4 colour print – Hindi/English

412 The Big Bang Theory 18” x 24” – 4 colour print – Hindi/English

413 TRAPPIST 1 and possibility of life A


414 TRAPPIST 1 and possibility of life B 18” x 24” – 4 colour print – Hindi/English

415 THE SUN TEMPLE 18” x 24” – 4 colour print – Hindi/English

416 RASHI CHAKRA 18” x 24” – 4 colour print – Hindi/English

417 IRON PILLAR 18” x 24” – 4 colour print – Hindi/English

418 KONARK SUN TEMPLE 18” x 24” – 4 colour print – Hindi/English

419 APOLLO 18” x 24” – 4 colour print – Hindi/English

CHARTS ON SYLLABUS 420 Hygiene 12” x 18” - 4 colour print – Single language – Hindi/English

421 Safety rules 12” x 18” - 4 colour print – Single language – Hindi/English

422 Plants and Trees 12” x 18” - 4 colour print – Single language – Hindi/English

423 Body Packages and organs 12” x 18” - 4 colour print – Single language – Hindi/English

424 Swacch Bhaarat 12” x 18” - 4 colour print – Single language – Hindi/English

425 Cause, Effects and reducing of Air Pollution

12” x 18” - 4 colour print – Single language – Hindi/English


Page 142 of 145

426 Helpful places and people 12” x 18” - 4 colour print – Single language – Hindi/English

427 Sources of food 12” x 18” - 4 colour print – Single language – Hindi/English

428 Rocks, minerals and soil 12” x 18” - 4 colour print – Single language – Hindi/English

429 Sources of water 12” x 18” - 4 colour print – Single language – Hindi/English

430 Saving forests - Causes & Effects 12” x 18” - 4 colour print – Single language – Hindi/English

431 Indoor safety 12” x 18” - 4 colour print – Single language – Hindi/English

432 Types of plants - climrs and creepers 12” x 18” - 4 colour print – Single language – Hindi/English

433 Leaf types 12” x 18” - 4 colour print – Single language – Hindi/English

434 Animal food habits / food chain 12” x 18” - 4 colour print – Single language – Hindi/English

435 Interesting Insects 12” x 18” - 4 colour print – Single language – Hindi/English

436 Cooking safety 12” x 18” - 4 colour print – Single language – Hindi/English

437 Evolution of Tools & Machines 12” x 18” - 4 colour print – Single language – Hindi/English

438 Ways to store portable water 12” x 18” - 4 colour print – Single language – Hindi/English

439 Water pollution chart 12” x 18” - 4 colour print – Single language – Hindi/English

440 Natural disasters and tech to fight them


441 Personal cleanliness 12” x 18” - 4 colour print – Single language – Hindi/English

442 Food from plants 12” x 18” - 4 colour print – Single language – Hindi/English

443 Food pyramid and balanced diet 12” x 18” - 4 colour print – Single language – Hindi/English

444 Composition of Air 12” x 18” - 4 colour print – Single language – Hindi/English

445 Wind types 12” x 18” - 4 colour print – Single language – Hindi/English

446 Cause, Effects of Water pollution 12” x 18” - 4 colour print – Single language – Hindi/English

447 Water Cycle 12” x 18” - 4 colour print – Single language – Hindi/English

448 Reason of Season 12” x 18” - 4 colour print – Single language – Hindi/English

449 Moons of Jupiter 12” x 18” - 4 colour print – Single language – Hindi/English

450 Artificial satellite 12” x 18” - 4 colour print – Single language – Hindi/English

451 Soil erosion 12” x 18” - 4 colour print – Single language – Hindi/English

452 Types of joints lalled 12” x 18” - 4 colour print – Single language – Hindi/English

453 First aid 12” x 18” - 4 colour print – Single language – Hindi/English

454 Super Senses chart 12” x 18” - 4 colour print – Single language – Hindi/English

455 Animal kingdom 12” x 18” - 4 colour print – Single language – Hindi/English

456 Air borne diseases 12” x 18” - 4 colour print – Single language – Hindi/English

457 Water profile of Earth 12” x 18” - 4 colour print – Single language – Hindi/English

458 Renewable vs Non-renewable energy 12” x 18” - 4 colour print – Single language – Hindi/English

459 Conserving energy 12” x 18” - 4 colour print – Single language – Hindi/English

460 Food from Animals 12” x 18” - 4 colour print – Single language – Hindi/English

461 Classification by food habits 12” x 18” - 4 colour print – Single language – Hindi/English

462 Top 3 food for various components 12” x 18” - 4 colour print – Single language – Hindi/English

463 Foods that heal 12” x 18” - 4 colour print – Single language – Hindi/English

464 Charkha revolution of India 12” x 18” - 4 colour print – Single language – Hindi/English


Page 143 of 145

465 THE IDEAL STUDENT 12” x 18” - 4 colour print – Single language – Hindi/English

466 Math - Amazing numr patterns 12” x 18” - 4 colour print – Single language – Hindi/English

467 Rainwater harvesting 12” x 18” - 4 colour print – Single language – Hindi/English

468 Composting, vermicomposting, Landfills


469 Adaptations in animals for extreme climates


470 Nitrogen cycle 12” x 18” - 4 colour print – Single language – Hindi/English

471 The Micro World 12” x 18” - 4 colour print – Single language – Hindi/English

472 Metallurgical advancements in Ancient India


473 Pyre, Pyrotechnic - fighting fire 12” x 18” - 4 colour print – Single language – Hindi/English

474 Respiratory system 12” x 18” - 4 colour print – Single language – Hindi/English

475 Schematic diagram of Petrol refinery 12” x 18” - 4 colour print – Single language – Hindi/English

476 Constellations and their stories 12” x 18” - 4 colour print – Single language – Hindi/English

477 Image formation in Convex lens 12” x 18” - 4 colour print – Single language – Hindi/English

478 Biotechnology 12” x 18” - 4 colour print – Single language – Hindi/English

MISC CHARTS 479 Illusion - Faces or Vase 12” x 18” - 4 colour print – Single language – Hindi/English

480 Illusion - Straight lines or Curved 12” x 18” - 4 colour print – Single language – Hindi/English

481 Illusion - All lines are straight 12” x 18” - 4 colour print – Single language – Hindi/English

482 Illusion - All Circles are of the same size


483 Illusion - Impossible objects 12” x 18” - 4 colour print – Single language – Hindi/English

484 Illusion - Static or Moving image? - A


485 Illusion - Static or Moving image? - B


486 Illusion - Static or Moving image? - C


487 Illusion - Static or Moving image? - D


488 Jesus/Buddha Illusion 12” x 18” - 4 colour print – Single language – Hindi/English

489 TABLES 13” x 48” x 27” – 7 units and 20” x 48” x 27” – 5 units made using metal having minimum 0.5 mm M.S sheet on the top

490 STORAGE CUPBOARDS 76” x 36” x 19” – 5 Packageition, steel Almirah – 1 units

491 COMMON TOOLS BOX Screw drivers, Scissors, glue, spanner, stapler & pins, plier

492 TROUBLE SHOOTING ANDREPAIRS BOX 6v bulbs, LEDs, electrical connectors, rechargeable batteries or 10 pcs of AA battery, connecting wires, safety goggles, rubber gloves


Page 144 of 145

Note:

1) All ABS plastic has ISO 1183, ISO11359, ISO178 and ISO527.

2) MDF/Plywood Board has IS 303:1989 (Reaffirmed 2003).

3) All products must harmless to students. 4) The information booklet for Innovative Science Center printed& supplied along with above material.

5) 2% tolerance will consider for sizes & Material set packed and labeled well.


Page 145 of 145

FINANCIAL BID SUBMISSION FORM

To: Chief General Manager (EIS & EPS) EdCIL (India) Limited EdCIL House, 18 A, Sector-16 A NOIDA – 201301 (U.P.), India

Dated: ___/___/2022 Dear Sir, We, the undersigned, offer to provide “EOI for Selection of Partner/Original Equipment Manufacturer (OEM)/ System Integrator (SI) for Pre-Bid Tie-up Participation in Tender issued by authorities of JHARKHAND Govt. for Set Up of Integrated Math’s & Science Room in 525 Schools of Jharkhand with manpower and 3 years maintenance”. In accordance with your request for proposal dated ___/___/2022. Our attached Financial Bid is for the amount of ___________ [Indicate the corresponding

to the amount(s), currency(ies) {Insert amount(s) in words and figures}].

Please note that all amounts shall be the same as in Price Bid. Our Financial Bid shall be binding upon by us subject to the modifications resulting from Contract negotiations, if any,

up to expiration of the validity period of the Proposal. Yours sincerely, Authorized Signature {In full and initials}: Name and Title of Signatory: In the capacity of: Address: E-mail: