초고주파 대역 도파관 부품 측정 기술 Measurement Techniques for Microwave Waveguide Components 저자 (Authors) 유상길, 최순우, 김동현, 김대오, 안병철 Sang-Gil Yu, Swoon-Woo Choi, Dong-Hyun Kim, Dae-Oh, Kim, Bierng-Chearl Ahn 출처 (Source) 한국정보기술학회논문지 14(5), 2016.5, 49-57 (9 pages) Journal of Korean Institute of Information Technology 14(5), 2016.5, 49-57 (9 pages) 발행처 (Publisher) 한국정보기술학회 Korean Institute of Information Technology URL http://www.dbpia.co.kr/Article/NODE06680574 APA Style 유상길, 최순우, 김동현, 김대오, 안병철 (2016). 초고주파 대역 도파관 부품 측정 기술. 한국정보기 술학회논문지, 14(5), 49-57. 이용정보 (Accessed) 저작권 안내 DBpia에서 제공되는 모든 저작물의 저작권은 원저작자에게 있으며, 누리미디어는 각 저작물의 내용을 보증하거나 책임을 지지 않습니다. 그리고 DBpia에서 제공되는 저작물은 DBpia와 구독계약을 체결한 기관소속 이용자 혹은 해당 저작물의 개별 구매자 가 비영리적으로만 이용할 수 있습니다. 그러므로 이에 위반하여 DBpia에서 제공되는 저작물을 복제, 전송 등의 방법으로 무단 이용하는 경우 관련 법령에 따라 민, 형사상의 책임을 질 수 있습니다. Copyright Information Copyright of all literary works provided by DBpia belongs to the copyright holder(s)and Nurimedia does not guarantee contents of the literary work or assume responsibility for the same. In addition, the literary works provided by DBpia may only be used by the users affiliated to the institutions which executed a subscription agreement with DBpia or the individual purchasers of the literary work(s)for non-commercial purposes. Therefore, any person who illegally uses the literary works provided by DBpia by means of reproduction or transmission shall assume civil and criminal responsibility according to applicable laws and regulations. 충북대학교 203.255.70.*** 2017/01/03 11:50 (KST)
10
Embed
초고주파 대역 도파관 부품 측정 기술ael.cbnu.ac.kr/AEL-results/papers/유상길(2016... · 2017-01-03 · 초고주파 대역 도파관 부품 측정 기술 Measurement
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
초고주파 대역 도파관 부품 측정 기술Measurement Techniques for Microwave Waveguide Components
저자(Authors)
유상길, 최순우, 김동현, 김대오, 안병철Sang-Gil Yu, Swoon-Woo Choi, Dong-Hyun Kim, Dae-Oh, Kim, Bierng-Chearl Ahn
출처(Source)
한국정보기술학회논문지 14(5), 2016.5, 49-57 (9 pages)Journal of Korean Institute of Information Technology 14(5), 2016.5, 49-57 (9 pages)
발행처(Publisher)
한국정보기술학회Korean Institute of Information Technology
URL http://www.dbpia.co.kr/Article/NODE06680574
APA Style 유상길, 최순우, 김동현, 김대오, 안병철 (2016). 초고주파 대역 도파관 부품 측정 기술. 한국정보기술학회논문지, 14(5), 49-57.
이용정보(Accessed)
저작권 안내DBpia에서 제공되는 모든 저작물의 저작권은 원저작자에게 있으며, 누리미디어는 각 저작물의 내용을 보증하거나 책임을 지지않습니다. 그리고 DBpia에서 제공되는 저작물은 DBpia와 구독계약을 체결한 기관소속 이용자 혹은 해당 저작물의 개별 구매자가 비영리적으로만 이용할 수 있습니다. 그러므로 이에 위반하여 DBpia에서 제공되는 저작물을 복제, 전송 등의 방법으로 무단이용하는 경우 관련 법령에 따라 민, 형사상의 책임을 질 수 있습니다.
Copyright InformationCopyright of all literary works provided by DBpia belongs to the copyright holder(s)and Nurimedia does not guaranteecontents of the literary work or assume responsibility for the same. In addition, the literary works provided by DBpia mayonly be used by the users affiliated to the institutions which executed a subscription agreement with DBpia or theindividual purchasers of the literary work(s)for non-commercial purposes. Therefore, any person who illegally uses theliterary works provided by DBpia by means of reproduction or transmission shall assume civil and criminal responsibilityaccording to applicable laws and regulations.
본 논문에서는 초고주파 대역 도파관 부품의 정밀 측정기술을 제시하였다. 도파관 부품 측정시 회로망 분석
기 내부의 오차 파라미터를 제시하고 SOLT(Short-Offset short-Load-Thru) 방식을 이용한 보정 결과를 제시하였
다. 원형-사각 도파관 변환부의 특성은 3개의 이동단락부하를 이용하여 측정하였다. 원형 도파관의 종단에 제
작된 이동단락부하를 순차적으로 연결하여 얻은 반사계수 측정값으로부터 DUT의 산란계수를 얻었다. 측정된
원형-사각 도파관 변환부는 주파수 10~15GHz에서 -18dB 이하의 반사계수와 -0.16dB 이상의 투과계수를 갖는
다. 다음으로 저반사 혼을 이용한 직교모드 변환기의 측정 방법을 제시하였다. 원형 도파관을 갖는 직교모드변
환기의 공용 포트에 저반사 혼을 연결한 후 직선-측면 포트에서의 성능을 측정하였다. 본 연구에 의한 직교모
드변환기의 측정 결과는 이론적인 설계치와 잘 일치한다.
Abstract
This paper presents precise measurement techniques for waveguide components at microwave band. The error parameters are presented in the network analyzer and the calibrated results are shown by using the SOLT(Short-Offset short-Load-Thru) kit when measuring waveguide components. A method is proposed to obtain the performances of the circular-rectangular waveguide transition by in order connecting 3 offset shorts. The scattering parameters of the transition are calculated from the measured reflection coefficients with 3 offset shorts. The waveguide transition has a reflection coefficient of less than -18dB and a transmission coefficient of more than –0.16dB. Next, a method utilizing a low-reflection horn at the common port of an OMT is introduced. The electric performances between the straight and side ports are measured by employing connecting a low-reflection horn at the common port of the OMT. The measurements agree well with the designed results.
Keywordswaveguide components, error parameter in the network analyzer, waveguide calibration, low-reflection horn
* 충북대학교 전파통신공학과
** 충북대학교 전파공학과
*** 한국항공우주연구원**** 충북대학교 전파통신공학과 교수(교신저자)
접 수 일: 2015년 11월 30일수정완료일: 2016년 05월 09일
게재확정일: 2016년 05월 12일
ž Received: Nov. 30, 2015, Revised: May 09, 2016, Accepted: May 12, 2016ž Corresponding Author: Bierng-Chearl Ahn Director of Applied Electromagnetics Lab., Chungbuk National University, Cheongdae-ro 1, Cheongju City, Chungbuk Province, 361-763, Korea Tel.: +82-43-261-3194, Email: [email protected]
직교모드 변환기의 공용포트와 동일하게 하였다. 저반사혼의 계산된 반사계수는 주파수 11.75-15GHz 범위에서 -25dB 이하의 반사계수를 갖는다. 그림 11은 가공된 저반사혼이 결합된 직교모드 변환기의
형상이다. 그림 12는 제작된 직교모드 변환기에 저반사혼을
연결한 후 측정된 직선/측면 포트에서의 반사계수
및 직선-측면 포트간의 격리도 특성이다. 그림에서
실선은 측정 결과이고 쇄선은 계산결과이다. 이론치
와 계산치가 잘 일치함을 알 수 있다.
Ⅳ. 결 론
본 논문에서는 초고주파 대역에서 도파관 부품의
정밀 측정을 위한 보정 기술을 소개하고 원형-사각
도파관 변환부와 직교모드변환기의 측정 방법을 제
시하였다. 회로망 분석기를 이용한 도파관 부품 측
정에서 계기 오차 원인을 제시하고 반사계수 및 전
달계수 측정시 보상 방법을 보였다. 도파관 부품 측정에 널리 적용되는 원형-사각 도
파관 변환부의 종단에 3개의 이동단락부하를 연결
하여 얻은 반사계수 측정 결과로부터 도파관 변환
부의 산란 계수를 계산하였다. 실제 측정된 원형-사각 도파관 변환부는 주파수 10-15GHz에서 -18.5 ~ -43dB의 반사계수와 -0.16dB 이상의 투과 계수를 갖
는다. 원형 도파관을 갖는 직교모드 변환기의 공용
포트에 저반사혼을 연결하여 직선, 측면 포트에서의
특성을 측정하였다. 이와 같은 방법으로 측정된 직
선/측면 포트에서의 반사계수와 포트간 격리도 특
성은 계산 결과와 잘 일치함을 알 수 있었다. 본 논문에서 제시된 결과는 입출력단이 표준 사
각 도파관이 아닌 경우의 도파관 부품 측정 방법을
주로 제시하였다. 따라서 본 논문의 결과는 향후 도
파관 부품 정밀 측정에 유용한 가이드라인을 제공
할 것으로 판단된다.
References
[1] Y. M. Kim, Y. S. Jung, J. W. Non, L. J. Zhang, and B. C. Ahn, "Design of 70/80GHz broadband orthomode transducer", Journal of KIIT, Vol. 13, No. 7, pp. 43-50, July 2015.
[2] T. L. Zhang and Z. H. Yan, "A Ka dual-band circular waveguide polarizer", 7th Int. Symp. on Antennas, Propag. and EM Theory, 2006, Vo1. 1, pp. 1-4, Oct. 2006.
[3] A. J. Simmons, "Phase shift by periodic loading of waveguide and its applications to broad-band circular polarization", IRE Trans. Microwave Theory Tech., Vol. MTT-3, pp. 18-21, Dec. 1955.
[4] Jae-Ho Cha, Myung-sook Jung, and Bierng-Chearl Ahn, "Design of a W-band orthomode transducer," Journal of KIIT, Vol. 13, No. 3, pp. 91-96, Mar. 2016.
[6] K. J. Silvonen, "A general approach to network analyzer application", IEEE Trans. Microwave Theory Tech., Vol. MTT-40, No. 3, pp. 624-630, Apr. 1991.
[7] F. M. Ghannouchi, A Brodeur, and F. Bearuregard, "A de-embedding technique for reflection-based S-parameters measurements of microwave device", IEEE Conf. Precision Electromag. Meas., pp. 119-120, 1994.
Journal of KIIT. Vol. 14, No. 5, pp. 49-57, May 31, 2016. pISSN 1598-8619, eISSN 2093-7571 57
[8] S. Rehnmark, "On the calibration process of automatic network analyzer systems", IEEE Trans. Microwave Theory Tech., Vol. MTT-22, No. 4, pp. 457-458, Apr. 1974.