2015 년도 한국철도학회 춘계학술대회 논문집 KSR2015S178 대차프레임 용접조인트에 대한 시편 피로강도 평가 Fatigue strength assessments of test specimens for the welded joints of bogie frame 김우진 *† , 송시엽 * , 한승호 ** Woo-Jin Kim *† , See-Yeob Song * , Seung-Ho Han ** Abstract The fatigue assessment of the welded joints those are applied to the bogie frame for the rolling stock has been studied widely as can be found in the international standards. In this paper, a plan for making welding specimen has been made with considering the shape and the welding cut section with respect to the bogie frame to be used for the mass production. Then, welding specimens were collected per each weld joint to establish the fatigue test procedure and the way of assessment. Through the fatigue strength of the specimen should be evaluated meets the S-N curve presented by international standards. Keywords : Welded joint, Fatigue assessment, S-N curve, Fatigue strength 초 록 철도차량의 대차프레임에 적용되는 용접조인트에 대한 피로평가는 국제 규격에서 도 볼 수 있듯이 많이 연구되어 왔다. 본 논문에서는 양산에 적용되는 실제 대차프레임에 대해서 형상 및 용접단면 정보를 바탕으로 용접시편 채취 방안을 고려하여, 각 용접조인 트 별로 시편을 채취하여 피로시험절차와 평가방법에 대해서 연구하였으며, 피로시험을 통하여 시편의 피로강도가 국제 규격에서 제시하는 S-N선도를 만족하는지 평가하고자 한 다. 주요어 : 용접조인트, 피로평가, S-N 선도, 피로강도 1. 서 론 철도차량 대차프레임은 내구수명 동안 운행하면서 지속적으로 반복하중을 받고 있다. 또한 대차프레임의 모든 구조에 대한 접합은 여러 가지 형상 및 용접단면으로 이루어져 있는 용 접구조물이다. 따라서 대차프레임은 용접 작업에 대한 건전성을 유지하여 내구수명 동안 각 용접조인트에 대한 피로강도 확보가 매우 중요하다고 볼 수 있다. 본 논문에서는 실제 양산용으로 제작된 대차프레임에 대하여 국제 규격에서 제시하는 형 태의 시편을 채취하여 피로시험절차를 기술하고, 용접 형상이 다른 각각의 용접조인트 별 평가방법을 기술한다. 또한 피로시험을 통해 시편의 피로강도가 규격에서 요구하는 S-N선도 를 만족여부를 평가한다. † 교신저자: 현대로템주식회사 응용기술연구팀([email protected]) * 현대로템 기술연구소 응용기술연구팀 ** 동아대학교 공과대학 기계공학과 교수
6
Embed
대차프레임 용접조인트에 대한 시편 피로강도 평가 - Railwayrailway.or.kr/Papers_Conference/201501/pdf/KSR2015S178.pdf · 2015-07-15 · 2. 본 론 2.1 시편 피로시험
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2015 년도 한국철도학회 춘계학술대회 논문집 KSR2015S178
대차프레임 용접조인트에 대한 시편 피로강도 평가
Fatigue strength assessments of test specimens for the welded joints of bogie frame
김우진*†, 송시엽*, 한승호**
Woo-Jin Kim*†, See-Yeob Song*, Seung-Ho Han**
Abstract The fatigue assessment of the welded joints those are applied to the bogie frame for the rolling stock has been studied widely as can be found in the international standards. In this paper, a plan for making welding specimen has been made with considering the shape and the welding cut section with respect to the bogie frame to be used for the mass production. Then, welding specimens were collected per each weld joint to establish the fatigue test procedure and the way of assessment. Through the fatigue strength of the specimen should be evaluated meets the S-N curve presented by international standards. Keywords : Welded joint, Fatigue assessment, S-N curve, Fatigue strength 초 록 철도차량의 대차프레임에 적용되는 용접조인트에 대한 피로평가는 국제 규격에서도 볼 수 있듯이 많이 연구되어 왔다. 본 논문에서는 양산에 적용되는 실제 대차프레임에 대해서 형상 및 용접단면 정보를 바탕으로 용접시편 채취 방안을 고려하여, 각 용접조인트 별로 시편을 채취하여 피로시험절차와 평가방법에 대해서 연구하였으며, 피로시험을 통하여 시편의 피로강도가 국제 규격에서 제시하는 S-N선도를 만족하는지 평가하고자 한다.