ENVIRONMENTALMONITORING
A Comprehensive Handbook
JEANNE MOLDENHAUEREditor
Volume Eight
PDABethesda, MD, USA
DHI Publishing, LLCRiver Grove, IL, USA
00 FrontMatter copy:FrontMatter 28/8/17 18:47 Page 1
To order the book, please visit: go.pda.org/EM8
10 9 8 7 6 5 4 3 2 1
ISBN: 978-1-942911-13-5Copyright © 2017 J. MoldenhauerAll rights reserved.
All rights reserved. This book is protected by copyright. No part of it may be reproduced, storedin a retrieval system or transmitted in any means, electronic, mechanical, photocopying,recording, or otherwise, without written permission from the publisher. Printed in the UnitedStates of America.
Where a product trademark, registration mark, or other protected mark is made in the text,ownership of the mark remains with the lawful owner of the mark. No claim, intentional orotherwise, is made by reference to any such marks in the book. The authors have made everyeffort to provide accurate citations. If there are any omissions, please contact the publisher.
While every effort has been made by the publisher and the authors to ensure the accuracyof the information expressed in this book, the organization accepts no responsibility for errorsor omissions. The views expressed in this book are those of the editors and authors and may notrepresent those of either Davis Healthcare International or the PDA, its officers, or directors.
This book is printed on sustainable resource paper approved by the Forest Stewardship Council. The printer, GaschPrinting, LLC, is a member of the Green Press Initiative and all paper used is from SFI (Sustainable Forest Initiative)certified mills.
PDA Global Headquarters Davis Healthcare International Publishing, LLCBethesda Towers, Suite 600 2636West Street
4350 East-West Highway River Grove
Bethesda, MD 20814 IL 60171
United States United States
www.pda.org/bookstore www.DHIBooks.com
001-301-986-0293
00 FrontMatter copy:FrontMatter 28/8/17 18:47 Page 2
CONTENTS
Introduction xi
REGULATORY/COMPENDIAL UPDATES
1 APPLICATION OF ISO 14644 PARTS 1AND 2FOR CLEANROOM CONTAMINATION CONTROL 3Tim SandleIntroduction 3Cleanrooms and Contamination Control 4Brief History of Cleanroom Standards 6ISO 14644 7ISO 14644 and Cleanroom Classification 10
Particle sizes to be measured 11Number of locations to be measured within the cleanroom 12Location of particle counters within the cleanroom 13Volume of air to be sampled 13Assessing results 14Particle counter probe locations 14Test certification 14
Particle Counters 15On-going Compliance with ISO 14644-1 15
Particle count cleanroom test 16Air pressure differentials 16
iii
002 Contents:Layout 1 28/8/17 18:49 Page iii (Black plate)
Airflow 16Installed filter leakage 17Containment leakage 18Recovery 18Airflow visualization 18Risk assessment 18
Conclusion 19References 20About the Author 27
2 MICROBIAL MONITORING IN CLEANROOMS: USE OFCONTAMINATION RECOVERY RATES (USP <1116>),REALTIME MONITORING,ANDTHE STATE OFCONTAMINATION CONTROL 23Claudio Denoya and Gilberto DalmasoKey Objectives of the Chapter 23Introduction 23Pharmaceutical Industry and the Need for Aseptic Processing 24Aseptic Processing and Environmental Monitoring 25Microbiological Control and Monitoring of Aseptic Processing Environments 26
Title 26Scope 26Aseptically filled product 27Room classes 27Risk assessment 28Air changes 29The case for CRR 29Case study 1: garment contamination rates 30Case study 2: critical area — freeze drying 33Case study 3: routine active air — Grade B 35Conclusions on CRR 36
Microbial Monitoring: Instrumentation and Real Time Monitoring 36Real Time Microbial Monitoring Using Laser-Induced Fluorescence 37Surface Sampling 40FinalWords 40References 41About the Authors 42
3 ENVIRONMENTAL MONITORING FORSTERILE COMPOUNDING 45Fran McAteerIntroduction 45History 46
Drug Quality and Security Act 47
Environmental Monitoringiv
002 Contents:Layout 1 28/8/17 18:49 Page iv (Black plate)
USP <797> Lexicon 48Definitions 48
USP <797> CSP Microbiological Contamination Risk Levels 50Low-risk level CSPs 50Medium-risk level CSPs 50High-risk level CSPs 51Intermediate use CSPs 51
Physical Facilities and Equipment 51Environmental monitoring 52Nonviable airborne particle testing program 54Viable airborne particle testing program 54Surface disinfection sampling and assessment 55Gloved fingertip testing 56
Conclusion 57References 58About the Author 58
4 THE CHANGING EXPECTATIONS FOR MICROBIOLOGICALTESTING OF PHARMACEUTICAL PRODUCTS 61Jeanne MoldenhauerAbstract 61Quality Attributes 61
Route of administration 61Patient population 62Dosage form/product formulation 62
Sources of Microorganisms in Pharmaceutical Manufacturing 62Raw materials 62Manufacturing process 63Manufacturing environment 63Control mechanisms 63Aqueous and multi-dose products 64Burkholderia cepacia complex (BCC) 64
Regulatory Updates —The Compliance Perspective 65Applicable standards 65Quality control strategy 65Environmental monitoring 66
Conclusion 66References 66About the Author 69Appendix 69
Contents v
002 Contents:Layout 1 28/8/17 18:49 Page v (Black plate)
TESTING METHODS
5 PARTICLE COUNTINGAND ENVIRONMENTAL MONITORING 75Mark HallworthIntroduction 75Particle Counting Cleanroom Standards — ISO 14644 76
Updated ISO 14644-1 76Updated ISO 14644-2 79
Certification and Monitoring for GMP Compliance 80EU GMP Annex 1 81
FDA Guidance on Sterile Manufacture 82Data Reporting, Interpretation, and Action Management 83
Data reporting 84Setting alert and action limits 85
Summary 87References 87About the Author 88
RISK METHODSANDTOOLS
6 CONTAMINATION CONTROL USINGA RISK-BASED,AUTOMATED CLEANINGVALIDATION SOFTWARE SYSTEM 91Susan Cleary and Parsa FamiliIntroduction 91Contamination Risks 92Contamination Control 94Operators and the Cleaning Crew 95Equipment Design 95Residues 95
Bacteria 96Fungi —Yeasts 96Fungi — Mold 97
Environmental Monitoring 97Sampling 97
Analytical methods 98Cleaning Validation Data Management 99Automating Cleaning Validation 9921 CFR Part 11 — Compliancy and Data Integrity 101Change and Risk Control Integration 103Multi-Departmental Visibility 103Risk BasedWorst Case 104Calculating and Establishing Limits and Specifications 104
Environmental Monitoringvi
002 Contents:Layout 1 28/8/17 18:49 Page vi (Black plate)
Validation Events and Monitoring Events 106Results Entry 106Reporting Requirements 107Trending — Statistical Tools 107Paper vs Automated System 108Conclusion 110References 111About the Authors 113
ROUTINE MONITORING —AND NON-ROUTINE
7 A PRACTICALAPPROACHTO INVESTIGATINGENVIRONMENTAL EXCURSIONS 117RobertWestneyIntroduction 117Fundamentals of an Investigation Plan 118Step-by-Step Investigation Points 118
Alert level 119Action level 119
Root Cause Analysis 122Corrective/Preventive Action and Assessing Effectiveness 123Assessing Facility and Product Impact 123Summary 124References 125About the Author 126
8 ENVIRONMENTAL MONITORING:TABOOS,INVESTIGATIONS,AND IMPACTANALYSIS 127Olivier ChancelIntroduction 127Taboos onViable Particle Monitoring 128Taboos for Non-viable Particle Monitoring 132What About Rapid Microbiology Methods? 135Suggestions for Investigating an Environmental Monitoring Excursion 137
Detection of the excursion 138Investigation 139Investigation report 143
Conclusions 150References 151About the Author 152
Contents vii
002 Contents:Layout 1 28/8/17 18:49 Page vii (Black plate)
9 ENVIRONMENTAL MONITORINGAND ITS IMPACTONASSURANCE OF STERILITY 153Randy HuttIntroduction 153Non-viable Monitoring Performance 154Viable Monitoring Performance 154Alert and Action Levels 157
Setting of Alert and Action Levels 157Contamination Recovery Rate (CRR) per USP <116> 158
Investigation Section 158Data from QCmicrobiology 158Data from production filling operations 158Data specifically needed for a PM excursion 159Risk Assessment (RA) 159
Who Should Oversee Functions Related to Sterility Assurancefor EM and PM? 161Sterility assurance functions 161
Failure Mode and Effects Analysis (FMEA) 162Master Plan for Microbial Control 163Conclusion 163References 164About the Author 165
10 CHANGINGTHE PARADIGM OF CLEANINGANDDISINFECTION OF CLEANROOMS 167Jeanne Moldenhauer and Brian G. HubkaAbstract 167Background 167Typical Cleaning and Disinfection Agents 168
Alcohols 168Aldehydes 168Halogens 169Peroxygen compounds 170Phenolics 170Quaternary Ammonium Compounds (Quats) 171
Alternative Cleaning and Disinfectant Products 171Ozonated water 171Hydrogen activated water 172
Moving to Prevention Technologies 173Conclusion 173References 173About the Authors 174
Environmental Monitoringviii
002 Contents:Layout 1 28/8/17 18:49 Page viii (Black plate)
11 AGING FACILITIES AND MODERNIZINGASEPTICPROCESSES 175Michael HodgkinsonIntroduction 175Background and Context 175Aging Facility and Process Risks 177
Facility and equipment risks 177Process risks 179Personnel risks 179
Barriers to Modernization 180Identifying Opportunities to Modernize 181
Process performance indicators 181Quality system data 182Voice of the user 182Engineering assessments of facilities 183
Risk Assessments 183Education and training 185
Analyzing Opportunities and Action Planning 185Organizing opportunities 185Prioritizing actions 185Building a business case and plan 187
Modernization Options 188Facility and equipment modernization 188Aseptic process modernization 190Training and education modernization 191
Conclusion 192References 192About the Author 193
NEWTECHNOLOGIESAND SYSTEMS
12 PROSAND CONS OF USING MALDI-TOF MSFOR MICROBIOLOGICAL IDENTIFICATION 197Elvira Engelmann and Frank KuglerMALDI-TOF MS Methodology 198
Sample preparation 198Measurement 198Data evaluation 200Reference database 202
Pros and Cons of Using MALDI-TOF MS for Microbial Identification 202Fast identification 202Simple handling 203
Contents ix
002 Contents:Layout 1 28/8/17 18:49 Page ix (Black plate)
Cost-effectiveness 204Identification from liquid cultures 205Accurate and reliable identification 205Precision and consistency 206Robustness 206
MALDI-TOF Method in GMP Environment 207Limitations of the MALDI-TOF Method 207Creation of an In-house Database 209Continuous Fine-tuning Necessary 209Conclusions 209References 211About the Authors 214
13 ENVIRONMENTAL MONITORING METHODS FORPRODUCTION ISOLATORS 215Claire Fritz Briglia, Anne Connors, and Tim CserIntroduction 215Active Air Samplers 216Biological and Physical Efficiency 216Particle Counting 217Settling Plates 218Portable vs FixedViable Air Samplers 219
Fixed air sampler 222Simplifying EM in Isolators 224Glove/Sleeve Testing 225Swabs 227Risk Assessment 229Summary 229References 230About the Authors 231
Appendix 233
Index 243
Environmental Monitoringx
002 Contents:Layout 1 28/8/17 18:49 Page x (Black plate)
INTRODUCTION
This is volume 8 of the Environmental Monitoring Handbook series. Each volume of this seriesdiscusses different aspects of environmental monitoring. The Appendix describes the varioustopics and authors that can be found in volumes 1 through 7 of this series.
There are a variety of topics covered in this book. In some cases, it may be a topicintroduced in other volumes, but this chapter is a new take on an old subject. Other topics arebrand new to the series.
Dr. Tim Sandle discusses the changes in ISO 14644-1 and 2. Like all of Dr. Sandle’s work,you won’t want to miss this definitive piece! In other regulatory topics, Dr. Claudio Denoyaand Dr. Gilberto Dalmasso provide a detailed discussion on the Suggested Use ofContamination Rates as shown in USP <1116> for Aseptic Processes. Both of these authorshave a long history working in production facilities, so this is a really practical chapter. FranMcAteer wrote a great chapter on compounding pharmacies and implementation of USP<797>. This is a hot topic in the industry. Ending this section Jeanne Moldenhauer provides anupdate on changing regulatory requirements — presenting information presented by Dr. LynneEnsor and Mr. Thomas Arista at recent PDA meetings.
Dr. Olivier Chancel has a great chapter on environmental monitoring excursions, with lotsof interesting case studies. Dr. Randy Hutt and Dr. Robert Westney also provide theirperspective on environmental excursions. Jeanne Moldenhauer and Brian Hubka have a chapteron changing the paradigm for disinfectants and cleaning. Another great chapter is by MichaelHodgkinson, which deals with handling aging facilities.
xi
003 Introduction:Layout 1 28/8/17 18:48 Page xi (Black plate)
Elvira Engelmann and Frank Kugler work in a company that is a major source ofmicrobial identifications in Europe. They have extensively evaluated the Maldi-TOF fororganism identification. Their chapter describes the pros and cons of using thisinstrumentation. Claire Briglia, Anne Connors, and Tim Cser describe environmentalmonitoring methods to utilize for production isolators. Parsa Famili and Susan Cleary describea new automated tool used in the cleaning validation program to determine when validation isdue, and whether new product formulations fit into your validation matrix.
There is a wealth of useful information that you can use in establishing, maintaining andupdating your environmental monitoring program!
Environmental Monitoringxii
003 Introduction:Layout 1 28/8/17 18:48 Page xii (Black plate)