ChemLink Laboratories • 3960 Royal Drive; NW Kennesaw, GA 30144 • 770-499-8008 • 678-594-4485 • Fax 678-265-1164 • http://www.chemlinklabs.com C C rete Sweep is a dry, waterless concrete cleaning powder. The primary use is to clean and cover up unsightly stains on porous concrete. The powder is composed of minerals to help match the color of unstained concrete. Bio-stimulates are added to enhance the degradation of embedded oils. CRETE SWEEP is not an absorbent, absorb spills prior to application of CRETE SWEEP. Apply CRETE SWEEP to dry concrete stain with wind at your back. Wear safety glasses with eye shields Before After Crete Sweep Crete Sweep WATERLESS CONCRETE CLEANER WATERLESS CONCRETE CLEANER or safety goggles. Work 100% of product into concrete with a fine bristled broom. There is no need to over apply; a little product goes a long way! One shaker container will cover up to 200 sq. ft. of area. Re-apply CRETE SWEEP periodically depending upon traffic and oil leakage of vehicles. CRETE SWEEP will continue to work long after it has been applied. The active ingredients will continue to break down the oil in the concrete. New “WET” CRETE SWEEP application. Using a heavy duty pump sprayer add 1 cup of CRETE SWEEP per gallon of water. Agitate container to make sure CRETE SWEEP is mixed with water. Pressurize pump sprayer and spray evenly over stained areas. This is a great way to apply CRETE SWEEP on windy days. SDS available upon request.