…with people in mind ENTERPRISE 3000 BED
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
…with people in mind
ENTERPRISE 3000 BED
3 0 0 0
electric profiling hospital bed
Smart, safe…The Enterprise® 3000 electric profiling hospital
bed offers first-rate features and a modern,
stylish design at a very competitive price. it
offers excellent benefits in key areas:
Falls Prevention:
An excellent low height of 38cm helps to reduce
the risk of patient injury through falls, and
facilitates patient transfers to and from the bed.
Pressure Area Care:
The patented profiling system gives better
pressure reduction than standard profiling
beds, which helps to reduce the risk of
pressure ulcers.
Infection Control:
The bed has been designed to be easy to clean
and decontaminate, which helps to reduce
infection control rsiks.
Moving and Handling:
To cater for heavier patients, the bed has a safe
working load of 230kg. This, combined with
the fully electric operation, minimises the risk
of injury to carers and helps to increase
patient independence.
...and affordable
Integral Bed Extension
With mattress retainer
Easy to Clean
Smooth surfaces, head/foot
end panels and deck
sheets are removable
Manual CPR Release
Dual sided for backrest
Pivot points
Movements unique to
Enterprise 3000 bed
Conventional Beds
Enterprise 3000 bed
Improved risk management
1
22
Intelligent Profiling System
On descent, the knee-break stays raised until the backrest is semi-flat (1). Both the backrest and knee-break then descend together
until they reach a flat position simultaneously (2). This is unique – on other beds the knee-break descends regardless of backrest
angle, which can result in the client sliding down the bed. The intelligent profiling on the Enterprise 3000 bed maximises comfort
and reduces pressure, shear and friction. This helps to reduce the risk of pressure ulcers.
Compared to a conventional profiling bed (A), the Pro-Contour
Advance Profiling on the Enterprise 3000 bed raises the pivot
point of the backrest and thigh section closer to the client’s
natural pivot point (their hip joint) (B). It mimics the way a
person’s tissues stretch as they move from lying to sitting
and reduces compression on the mattress surface at the seat
section. This offers major benefits over conventional
profiling beds:
• Enhanced pressure, shear and friction reduction
• Excellent postural support
• Exceptional comfort
Pro-Contour® Advance Profiling
Exceptional Low Height
The excellent low height of 38cm enhances the safety of both
patients and carers. It allows easier downward transfers from
wheelchairs, chairs etc. In addition, for patients who are at risk
of falling and the use of safety sides is considered to be
inappropriate, the bed can be left at its lowest height.
Safe Working Load
The safe working load of 230kg allows for the safe
management of heavier patients, without the need to source
specialist equipment.
Enhanced Safety
• Standard (•) Optional
Features Technical Details
Electrical Details
Overall length 224cm (88”)
Overall length (extended) 237cm (931/4”)
Overall width 102cm (40”)
Mattress size (length x width) 198 x 86cm (78 x 34”)
Height range 38 – 79cm (143/4 – 31”)
Trendelenberg and Reverse Trendelenberg +12° / –8°
Backrest angle (maximum) 70°
Knee-break angle (maximum) 30°
Safe working load 230kg (506lbs)
Product weight without safety sides 113kg (249lbs)
Power in 2A max at 230V a.c. 50/60 Hz
Electrical shock protection Class 1, Type B
Liquid ingress protection IP54
Batteries2 x 12V series connected, rechargeable,lead/acid gel 1.2 amp hrs
Electrically operated backrest, knee-break, height adjustment •
Electrically operated Trendelenberg /Reverse Trendelenberg tilt •
Patient and nurse handsets with raised, embossed buttons •
Auto-Contour button •
Pro-Contour Advance profiling •
Intelligent profiling system •
Attendant control panel to lock out handset functions •
Battery back-up •
Retracting, rising backrest •
Ratchet calf section adjustment •
Dual-sided manual CPR levers for backrest •
Perforated removable dimple sheet mattress platform •
Removable moulded head and foot ends •
Dual sided integral drainage bag rails with hooks •
Linked braking/steering system •
150mm under-bed clearance for hoist access •
Linen shelf •
Integral bed extension with mattress retainer •
Moulded plastic base cover •
125mm single-wheel castors •
150mm single or twin-wheel castors (•)
Integral folding safety sides (•)
Head/Foot Panel Infill Colour Options
Light Blue White Lilac Green
Beech Sea Blue Peach Mushroom
Medical Beds Product Division 310-312 Dallow Road, Luton, Bedfordshire, LU1 1TD, United KingdomT: +44 (0)1582 413104 F: +44 (0)1582 459100 E: [email protected] 24hr Helpline Lo-call T: 08457 342000 W: www.huntleigh.co.uk
Registered No: 942245 England. Registered Office: As Above.
©Huntleigh Healthcare Limited 2008
MEMBER OF THE GETINGE GROUP
® and ™ are trademarks of Huntleigh Technology Limited
As our policy is one of continuous improvement, we reserve the right to modify designs without prior notice. GENLIT 001/07 LIT 1131/01
…with people in mind
Related Documents
