Name: YEHIA ALI MOHAMED ABO EL ELLA Nationality: - EGYPT * Mailing Address: 29, MERZK MARZOUK ST., HADAEK EL KOBA, CAIRO, EGYPT Recent Address: Doha, Qatar * E-mail: [email protected]* Telephone: 0097444580821 * Mobile: 0097455039155 Date of Birth: 21 October 1956 Family Status: MARRIED, five CHILD Education: B.SC. MECHANICAL ENGINEER, POWER, AIN SHAMS UNIVERSITY, FACULTY OF ENGINEERING, WITH GRADE “GOOD” Membership: SYNDICATE FOR EGYPT ENGINEERING Availability for: - Interview - Mobilization UP TO YOU UP TO YOU
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
To execute the new project and any modification for old project. To study any operating problems to solve it to prevent repeated failure. To overhaul and Maintenance all
GULF OF SUEZ PETROLEUM CO.
GUPCO
FROM DECEMBER 1983 TO JUNE
1994
MECHANICAL ENGINEER GENERAL GENERAL PETROLEUM CO. GPC
EGYPT
FROM MARCH 1983 TO DEC.1983
COURSE/AREA * PLACE ** PERIOD/DURATION ANTIFRICATION BEARINGS FAILURE ANALYSIS
CAIRO UNIVERSITY
ONE WEEK
MAINTENANCE OF ROTATING EQUIPMENT AND ITS FAILURE ANALYSIS
KNPC
TRAINING CENTER
ONE WEEK
ENGINEERING PROJECT PLANNING AND CONTROL
AMERICAN UNIVERSITY
ONE WEEK
PREDICTIVE MAINTENANCE AND MACHINE MNITORING
AMERICAN UNIVERSITY
ONE WEEK
ABROAD TRAINING IN USA IN INGERSOLL- RAND (PUMPS) SOLAR GAS TURBINES WOODWARD GOVERNER
USA
ONE MONTH
BENTLY NEVADA SYSTEM ONE
QATAR
2 MONTHS
1
COMPUTER COURSES FOR WINDOS, EXCELL, MICROSOFT OFFICE SOFT WARE FOR ENGINEERING UTILITIES.
2
Training Courses Related Condition Monitoring And Failure Analysis. Reliability
3
Root Cause Failure Analysis.
4
Engineering Software
5
Computer Skill
c.v.
Yehia Ali Mohamed Abo El Ella Nationality : Egyptian.
LECTURER IN CONDITION MONITORING VIBRATION ANALYSIS AND
DIAGNOISES AT THE FLOWING PLACES:
1- AFMEMCO BUREAU:
- AT CAIRO, EGYPT
- AT LIBYA.1991
2- NATIONAL CONSULTANT BUREAU:
- AT KUWAIT FOR KUWAIT NATIONAL PETROLEUM CO.(KNPC).
1994
3- EGYPTION MAINTENANCE CO.
- AT CAIRO, EGYPT.
FIELD EXPERIENCES
Sept. 2008 Till Now : Senior Condition Monitoring for Rotating Equipment in Qatar Petroleum Refinery.
Oct. 2007- Till Oct. 2008 : Senior Project Engineer in PENSPEN INTERNATIONAL CO. For Al-Khafji Joint Operation Project in Saudi Arabia.
Nov. 2001 – Till Oct. 2007 : Condition Monitoring Specialist in Badr El Din
(BAPETCO) Petroleum Company.
June 2001 – Oct. 2001 : Coordinator in Egyptian Maintenance Co. (EMC) for
Maint.Dept. (Instrument, Electrical, Mechanical) in
Khalda Petroleum Co.
* June 1994 – June 2000 : Rotating Equipment Mechanical Engineer
(Condition Monitoring) In Kuwait National Petroleum
Co. Mina Al-Ahmadi Refinery “KNPC” in Kuwait.
* Dec.1983 – June 1994 : Rotating Equipment Mechanical Engineer and Project
Engineer in Gulf of Suez Petroleum Co. “GUPCO”
In Egypt, Ras Shukheir, Red Sea.(Oil & Gas Facilities
And Plant of LPG production)
* Mar. 1983 - Dec. 1983 : Mechanical Engineer in General Petroleum Co.
“GPC” in Ras Ghareb, Red Sea.
Training Courses
1- F i e l d Safety Course at Ras Shukheir Safety Department (att.no.1).
2- V i b r a t i o n Measurement and Analysis at Arabic Institute for Flying Technology.
3- P r e d i c t i v e Maintenance and Machine Monitoring System at the American University
in Cairo (att.no.3).
4- W e l d i n g Codes and Welding Qualification at the American University in Cairo.
5- E n g i n e e r i n g Project Planning and Control.
6- C o m p u t e r Course in dB IV at Sarhank in Cairo.
7- B a l a n c i n g of Rigid Rotors at Ras Shukheir Gas Plant.
8- C o m p u t e r Course in MS-WINDOWS95/98 at KNPC training Center.
9- M a i n t e n a n c e of Rotating Equipment and its Failure Analysis.
10- Computer Course in Advanced Excel V.
11- Computer Course in MS-WIN98 advanced.
12- Maintenance of Reciprocating Compressors and Diagnoses of Defects.
13- Antifriction Bearing Failure Analysis.
14-Bently Nevada System one.
ABROAD TRAINING
* Pump Operation and Maintenance at INGERSOLL-RAND at USA
* Operation and Routine Maintenance for Solar Gas Turbine at Solar
Technical Training at USA
* Woodward Governor at Woodward Governor Co. at USA.
Recently Employment
Period : From Sept. 2008 until Now
Work Place : Qatar, Qatar Petroleum, Refinery, Mesaeed
Position : Senior Condition Monitoring for Rotating Equipment.
Nature of Jobs and Responsibilities(Qatar Petroleum) 1- The individual provides technical expertise regarding Rotating equipment issues for their
assigned area and reports directly to the Asst. Manager Reliability / Optimization.
2- This individual may support unit outages, lead investigations, perform outside shop audits,
conduct in-process rotating equipment inspections for new equipment.
3- Assistance to operations / Mechanical / Electrical which includes Troubleshooting, evaluation of equipment failures, technical recommendations for repairs and upgrades, and support for Turnarounds.
4- Support or review for Changes of Designs to improve the safety, quality, environmental impact or cost of the production unit.
5- Provide technical assistance to develop and implement mechanical integrity for unit.
6- Developing CM reports that will support the Class Output Management in providing
efficient and effective through life maintenance and advice to the end user.
7- Implements asset management strategy and Condition Monitoring integrity of the Refinery mechanical rotary equipment and related systems.
8- Applying short term, medium term, long-term mechanical rotary and lube oil analysis, goals, targets and maintenance strategy.
9- Reporting vibration diagnosis data and lubrication oil analysis to the Asst. Manager – Reliability/Optimization to take corrective advice and issue notifications.
10- Implementation and recording of rotating equipment condition based maintenance. 11- Following monthly, quarterly, biannually, and annually performance for Condition
12- Ability to conduct vibration analysis / rotor orbit analysis / phase analysis as and when required. Generate survey report / progresses report on routine basis and oversee maintenance activities as required.
13- Act as Assistant Manager Reliability/Optimisation as and when required.
1- Previous Employment
Period : From Oct. 2007 – Until Sept.2008
Work Place : Abu Dhabi at UAE
Position : Senior Principle Project Engineer.
Nature of Jobs and Responsibilities (PENSPEN)
Principle Senior Project Engineer: To Study and Review All Technical Data For Rotating
Equipment For New Project At Khafji Area as ARAMCO and International Standards like API,
ASTM, ANSI, ARAMCO,….
2- Last Employment
Period : Nov.2001 – Till Oct. 2007
Work place : Badr El Din Petroleum Company (PABETCO), EGYPT
Position : Condition Monitoring Department Head (Specialist).
Nature of Jobs and Responsibilities (BAPETCO)
1- To Build and Construct (System) Condition Monitoring Department and to Asset Maintenance organization using Condition Monitoring Technique
2- Troubleshooting for all rotating equipment to solve all problems to improve Reliability
In addition, Availability.
3- Responsible for technical training for junior engineers.
4- Member in Risk assessment Committee to cover any urgently unscheduled job.
5- Member in fiscal yearly Budgetary for plant.
6- Root Cause Analysis to solve repeated Failure Problems.
7- Used SAP (CMMMS)
8- Used CMMS (SAP) for Maintenance and KPI.
3- Last Pervious Employment (KHALDA- EMC)
Period : June 2001 – Oct.2001 Work Place : Khalda Petroleum Co. Maintenance Department, West Desert,
Egypt
Position : Coordinator for Mechanical, Instrument and Electrical
Maintenance Groups.
Nature of Jobs & Responsibilities (EMC)
Arrange all maintenance works for Mechanical, Electrical and Instrument.
Monitoring/ Follow up the all activities and control it to get the Best performance.
Develop and Prepare Technical Studies to Improve Performance of the Existing Gas
Processing Facilities and Machinery.
Troubleshooting for all Rotating Equipment to solve any problems.
Failure Analyses for rotating equipment to solve Repeated damaged it.
Supervision for Workshop to keep priority for Urgent job and give advice when required.
Provide technical input to modifications, minor projects and technical studies.
4- Previous End Employment (KNPC, KUWAIT)
Period : June 1994 – June 2000
Work Place : Mina Al-Ahmadi Refinery (MAA), ENGINEERING And
MAINTENANCE SERVICES IN Kuwait National Petroleum Co.
(KNPC), KUWAIT
Position : Equipment Support Engineer (Rotating Condition Monitoring Engineer)
Nature of Jobs & Responsibilities (KNPC, KUWAIT)
A- Vibration Analyst to performs vibration analysis, initiates, supervises & coordinates a.
Vibration monitoring and analyzing programmed with the assistance of technicians.
Review of daily vibration data, analysis of Vibration data using trending, Spectrum,
Time Waveform, Phase study, Orbit, Waterfall, history of machines and Balance rotors
Both in-situ and in a Balancing machine.
The works on all rotating equipment like Centrifugal/Reciprocating and Rotary Pumps