7/24/2019 English_Notice_ESE_2016 (1).pdf
1/24
1
Examination Notice No.5/2016ENGG. Dated 27.02.2016
(LAST DATE FOR SUBMISSION OFAPPLICATIONS:25.03.2016)
ENGINEERING SERVICES EXAMINATION,2016
(COMMISSION'SWEBSITE www.upsc.gov.in)
IMPORTANT1. CANDIDATESTOENSURETHEIRELIGIBILITYFORTHEEXAMINATION:
The candidates applying for the examination should ensure that they fulfil all eligibility conditions for admission to the
Examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the
prescribedeligibilityconditions.
Mere issue ofeAdmissionCertificateto thecandidate will not implythathis/hercandidaturehasbeenfinallyclearedby
theCommission.Commissiontakeupverificationofeligibilityconditionswithreferencetooriginaldocumentsonlyafterthe
candidatehasqualifiedforInterview/PersonalityTest.
2.HOWTOAPPLY
Candidatesare required to applyOnlineonlyby usingthewebsitewww.upsconline.nic.in. Brief instructions aregiven in
AppendixII. Detailedinstructionsforfillinguponlineapplicationsareavailableontheabovementionedwebsite.
3.LASTDATEFORSUBMISSIONOFAPPLICATIONS:
TheOnlineApplicationscanbefilledupto25th
March,2016(25.03.2016)till11.59PMafterwhichthelinkwillbedisabled.
4. The eligible candidates shall be issued an eAdmission Certificate three weeks before the commencement of the
examination.The
eAdmission
Certificate
will
be
made
available
in
the
UPSC
website
[www.upsc.gov.in]
for
downloading
by
candidates. No Admission Certificate will be sent by post. All the applicants are requested to provide valid & active
emaili.d.whilefillinguponlineapplicationformastheCommissionmayuseelectronicmodeforcontactingthem.
5.PENALTYFORWRONGANSWERS(inObjectiveTypePapers):
Candidatesshouldnotethattherewillbepenalty(NegativeMarking)forwronganswersmarkedbyacandidateinthe
ObjectiveTypeQuestionPapers.
6.FACILITATIONCOUNTERANDWEBSITEFORGUIDANCEOFCANDIDATES:
Incaseofanyguidance/information/clarificationregardingtheirapplications,candidatureetc.,candidatescancontactUPSCs
Facilitation Counter near Gate C of its campus in person or over Telephone Nos.01123385271/011
23381125/011 23098543 on working days between 10.00 hrs. and 17.00 hrs.TheCommissionalsohasWebsiteataddress:
www.upsc.gov.inoverwhichthecandidatescanobtaindetailsoftheexaminationaswellasinformationaboutregistrationof
theirapplications,venueoftheexaminationandresultsetc.
7.SPECIALINSTRUCTIONS:
Candidatesare
advised
to
read
carefully
Special
Instructions
to
the
candidates
for
Conventional
Type
Tests
and
Objective
Type Tests (Appendix III PartAand Part B). For both writing and marking answers in the OMR sheet [Answer Sheet] in
objectivetypepapers,candidatesmustuseblackballpenonly.Penswithanyothercoloursareprohibited.DonotusePencil
orinkpen.
Candidates should note that any omission/mistake/discrepancy in encoding/filling of details in the OMR answer sheet,
especiallywithregardtoRollNumberandTestBookletSeriescode,willrendertheanswersheetliableforrejection.
Candidates in the Category of visually impaired are advised not to apply for this examination as no vacancies are
earmarked/identifiedforthemfortheServices/PostsincludedinEngineeringServicesExamination,2016.
8.MOBILEPHONESNOTPERMITTED:
(a) Mobilesphones,pagers,bluetoothoranyothercommunicationdevicesarenotallowed insidethepremiseswherethe
examination is being conducted. Any infringement of these instructions shall entail disciplinary action including ban from
futureexaminations.
(b) Candidates are advised in their own interest not to bring any of the banned items including mobile phones/pagers or
any
valuable/costly
items
to
the
venue
of
the
examination,
as
arrangements
for
safekeeping
cannot
be
assured.
Commission
willnotberesponsibleforanylossinthisregard.
CANDIDATESAREREQUIREDTOAPPLYONLYTHROUGHONLINEMODE
Government strivestohaveaworkforcewhichreflectsgenderbalanceandwomencandidatesareencouragedto apply.
7/24/2019 English_Notice_ESE_2016 (1).pdf
2/24
2
No.F. 2/7/2015E.I(B): A combined competitive examinationfor recruitment to the services/ posts mentioned in para 2
below will be held by the Union Public Service Commission at AGARTALA, AHMEDABAD, AIZAWL, ALIGARH,
ALLAHABAD, BANGALORE, BAREILLY, BHOPAL, CHANDIGARH, CHENNAI, CUTTACK, DEHRADUN, DELHI, DHARWAD, DISPUR,
GANGTOK, HYDERABAD, IMPHAL, ITANAGAR, JAIPUR, JAMMU, JORHAT, KOCHI (COCHIN), KOHIMA, KOLKATA, LUCKNOW,
MADURAI, MUMBAI, NAGPUR, PANAJI (GOA), PATNA, PORT BLAIR, RAIPUR, RANCHI, SAMBALPUR, SHILLONG, SHIMLA,
SRINAGAR, THIRUVANANTHAPURAM, TIRUPATI, UDAIPUR AND VISHAKHAPATNAM commencing on 27th
May, 2016 in
accordance with the Rules published by the Ministry of Railways (Railway Board) in the Gazette of India Extraordinary
dated the 27th
February,2016.
THECENTRESANDTHEDATEOFHOLDINGTHEEXAMINATIONASMENTIONEDABOVEARELIABLETOBECHANGED
ATTHEDISCRETIONOFTHECOMMISSION.
Applicantsshouldnotethattherewillbeaceilingonthenumberofcandidatesallottedtoeachofthecentresexcept
Chennai, Delhi, Dispur, Kolkata and Nagpur. Allotment of Centres will be on the firstapplyfirstallot basis and once the
capacity ofaparticularcentreisattained,thesamewillbefrozen.Applicants,whocannotgetacentreoftheirchoicedueto
ceiling,willberequiredtochooseacentrefromtheremainingones.Applicantsare,thus,advisedthattheymayapplyearlyso
thattheycouldgetaCentreoftheirchoice.
NB : Notwithstanding the aforesaid provision, Commission reserve the right to change the Centres at their discretion if the
situationdemands.
CANDIDATESADMITTED TO THEEXAMINATION WILLBE INFORMEDOFTHETIMETABLEANDPLACEORPLACES OF
EXAMINATION.
Thecandidatesshouldnotethatnorequestforchangeofcentrewillbeentertained.
2.(A)RecruitmentontheresultsofthisexaminationwillbemadetotheServices/Postsunderthefollowingcategories:
Category ICivilEngineering.
Category IIMecahnicalEngineering.
Category IIIElectricalEngineering.
Category
IVElectronics
&
Telecommunication
Engineering.
Thenumberofvacanciestobefilledontheresultsoftheexaminationisexpectedtobeapproximately602including
32PHvacancies. Thenumberofvacanciesisliabletoalteration.
ReservationswillbemadeforcandidatesbelongingtoScheduledCastes,ScheduledTribes,OtherBackwardClasses
andPhysicallyDisabledCategoryinrespectofvacanciesasmaybefixedbytheGovernmentofIndia.
CATEGORYICIVILENGINEERING
GroupAServices/Posts
(i) IndianRailwayServiceofEngineers.
(ii) IndianRailwayStoresService(CivilEngineeringPosts).
(iii) CentralEngineeringService.
(iv) IndianOrdnanceFactoriesServiceAWM/JTS(CivilEngineeringPost)
(v) CentralEngineeringService(Roads),GrA(CivilEngineeringPosts).
(vi) CentralWater
Engineering
Service
Gr
A
(Civil
Engineering
Posts)
(vii) SurveyofIndiaGroupAService.
(viii)AEE(CivilEnggPosts)inBorderRoadsEngineeringServiceGrA.
(ix) AEE(Civil)ofP&TBuildingWorksGrA.
(x) IndianDefenceServiceofEngineers
(xi) AEE(QS&C)inMilitaryEngineerService(MES)SurveyorCadre.
CATEGORYIIMECHANICALENGINEERING
GroupA/BServices/Posts
(i) Indian Railway Service of MechanicalEngineers.
(ii) IndianRailwayStoresService(MechanicalEngineeringPosts).
(iii) IndianOrdnanceFactoriesServiceAWM/JTS(MechanicalEngineeringPosts).
(iv) CentralElectricalandMechanicalEngineeringService(MechanicalEngineeringPosts).
(v) GeologicalSurvey
of
India
Engineering
Service
Gr
A
(vi) CentralEngineeringService(Roads),GrA(MechanicalEngineeringPosts).
(vii) CentralWaterEngineeringServiceGrA(MechanicalEngineeringPosts).
(viii)AEE(MechEnggPosts)inBorderRoadsEngineeringServiceGrA.
(ix) IndianNavalArmamentService
(x) IndianDefenceServiceofEngineers.
(xi) CentralPowerEngineeringServiceGrB(MechanicalEngineeringPosts).
CATEGORYIIIELECTRICAL ENGINEERING
GroupA/BServices/Posts
(i) IndianRailwayServiceofElectricalEngineers.
7/24/2019 English_Notice_ESE_2016 (1).pdf
3/24
3
(ii) IndianRailwayStoresService(ElectricalEngineeringPosts).
(iii) CentralElectricalandMechanicalEngineeringService(ElectricalEngineeringPosts).
(iv) IndianOrdnanceFactoriesServiceAWM/JTS(ElectricalEngineeringPosts).
(v) IndianInspectionService(Asstt.Dir.GradeI).
(vi) IndianSupplyServiceGrA.
(vii) AEE(Electrical)ofP&TBuildingWorksGrA.
(viii) IndianNavalArmamentService.
(ix) IndianDefenceServiceofEngineers
(x) CentralPowerEngineeringServiceGrB(ElectricalEngineeringPosts).
CATEGORYIVELECTRONICS
AND
TELECOMMUNICATION
ENGINEERING
GroupAandBServices/Posts
(i) IndianRailwayServiceofSignalEngineers.
(ii) IndianRailwayStoresService(Telecommunication/ElectronicsEngineeringPosts).
(iii) IndianInspectionService(Asst.Dir.GradeI)
(iv) IndianTelecommunicationService,GroupA.
(v) IndianRadioRegulatoryServiceGrA
(vi) IndianOrdnanceFactoriesServiceAWM/JTS(ElectronicsandTelecommunicationEngineeringPosts).
(vii)IndianNavalArmamentService
(viii)JuniorTelecomOfficer(GeneralCentralServiceGroupB,Gazetted,NonMinisterial).
(ix) CentralPowerEngineeringServiceGroupB(ElectronicsandTelecommunicationEngineeringPosts).
Note: Recruitment to the Services/Posts mentioned above will be made on the basis of the scheme(s) of examination
prescribedin
Appendix
Ito
the
Notice.
Candidates
who
are
declared
qualified
on
the
result
of
written
part
of
the
examination
willberequiredtoindicatetheirpreferenceforServices/PostsattheappropriatetimeintheDetailedApplicationForm.
N.B. (i) DEPARTMENTAL CANDIDATES ARE THE CANDIDATES ADMITTED TO THE EXAMINATION UNDER AGE RELAXATION
VIDE RULE 5(B). SUCH CANDIDATES MAY GIVE THEIR PREFERENCES FOR THE SERVICES/POSTS IN OTHER
MINISTRIES/DEPARTMENTS ALSO.
N.B. (ii)Candidates admitted to the examination under the proviso to para3(III) will be considered only for the posts
mentionedinthesaidprovisoandtheirpreferenceforotherServicesandPosts,ifany,willbeignored.
N.B.(iii)ThecandidateswillbeallottedtovariousServices/Postsstrictlyinaccordancewiththeirmeritposition,preferences
exercisedbythemandnumberofvacancies,subjecttotheirmedicalfitness.
2(B) Acandidate may apply for admission to the examination in respect of anyone of the categories of the Services/Posts
mentioned in para 2 above viz. Civil Engineering or Mechanical Engineering or Electrical Engineering or Electronics &
TelecommunicationEngineering.
3.ELIGIBILITYCONDITIONS
(I)
Nationality:
Acandidatemustbeeither:
(a)acitizenofIndia,or
(b)asubjectofNepal,or
(c)asubjectofBhutan,or
(d)aTibetanrefugeewhocameovertoIndiabeforethe1st
January,1962withtheintentionofpermanentlysettlinginIndia,or
(e)apersonofIndianoriginwhohasmigrated from Pakistan, Burma,SriLankaorEastAfricancountriesofKenya,Uganda,
the United Republic of Tanzania, Zambia, Malawi, Zaire and Ethiopia or from Vietnam with the intention of permanently
settinginIndia.
Providedthatacandidatebelongingtocategories(b),(c),(d)and(e)aboveshallbeapersoninwhosefavouracertificate
ofeligibilityhasbeenissuedbytheGovernmentofIndia.
Acandidate inwhosecaseacertificateofeligibility isnecessary,maybeadmittedtotheexaminationbuttheofferof
appointment may be given only after the necessary eligibility certificate has been issued to him/her by the Government of
India.
(II)Age
Limits:
(a)Acandidateforthisexaminationmusthaveattainedtheageof21yearsandmustnothaveattainedtheageof30yearson
the1stJanuary,2016i.e.,he/shemusthavebeenbornnotearlierthan2ndJanuary,1986andnotlaterthan1stJanuary,1995.
(b) The upper agelimit of 30 years will be relaxable upto 35 years in the case of Government servants of the following
categories, iftheyareemployed inaDepartment/Officeunderthecontrolofanyoftheauthoritiesmentioned incolumn1
belowandapplyforadmissiontotheexaminationforalloranyoftheService(s)/Post(s)mentionedincolumn2,forwhichthey
areotherwiseeligible.
(i) AcandidatewhoholdssubstantivelyapermanentpostintheparticularDepartment/Officeconcerned.Thisrelaxation
willnotbeadmissibletoaprobationerappointedagainstapermanentpostintheDepartment/Officeduringtheperiodofhis
probation.However,thisrelaxationwillbeadmissibletoaprobationersoappointedprovidedhe/shealreadyretainsalienon
7/24/2019 English_Notice_ESE_2016 (1).pdf
4/24
4
apermanentpostinaDepartment/Officeunderthecontrolofanyoftheauthoritesmentionedincolumn1below.
(ii) AcandidatewhohasbeencontinuouslyinatemporaryserviceonaregularbasisintheparticularDepartment/Office
foratleast3yearsonthe1st
January,2016.
Note.The
period
of
apprenticeship
if
followed
by
appointment
against
a
working
post
on
the
Railways
may
be
treated
as
RailwayServiceforthepurposeofageconcession.
(c)Theupperagelimitprescribedabovewillbefurtherrelaxable:
(i) UptomaximumoffiveyearsifacandidatebelongstoaScheduledCasteoraScheduledTribe.
(ii) UptomaximumofthreeyearsinthecaseofcandidatesbelongingtoOtherBackwardClasseswhoareeligibletoavail
ofreservationapplicabletosuchcandidates.Theclosingdatefixedforthereceiptoftheapplicationwillbetreatedasthedate
fordeterminingtheOBCstatus(includingthatofcreamylayer)ofthecandidates.
(iii) UptomaximumoffiveyearsifacandidatehadordinarilybeendomiciledintheStateofJammuandKashmirduring
theperiodfromthe1stJanuary,1980tothe31stdayofDecember,1989.
(iv) Up to maximum of three years, in the case of Defence Services personnel, disabled in operations during hostilities
withanyforeigncountryorinadisturbedarea,andreleasedasaconsequencethereof.
(v) Up to maximum of five years in the case of Exservicemen including Commissioned Officers and ECOs/SSCOs, who
have rendered at least five years Military Service as on 1st
January, 2016 and have been released (i) on completion of
assignment
(including
those
whose
assignment
is
due)
to
be
completed
within
one
year
from
1
st
January,
2016
otherwise
than
bywayofdismissalordischargeonaccountofmisconductorinefficiency,or(ii)onaccountofphysicaldisabilityattributable to
MilitaryService,or(iii)oninvalidment.
(vi) UptomaximumoffiveyearsinthecaseofECOs/SSCOswhohavecompletedaninitialperiodofassignmentoffive
yearsofMilitaryServiceason1st
January,2016andwhoseassignmenthasbeenextendedbeyondfiveyearsandinwhosecase
theMinistryofDefenceissuesacertificatethattheycanapplyforcivilemploymentandtheywillbereleasedonthreemonths
noticeonselectionfromthedateofreceiptofofferofappointment.
(vii) Uptoamaximumof10yearsinthecaseofdeafmuteandOrthopaedicallyhandicappedpersons.
Note I : Candidates belonging to the Scheduled Castes and the Scheduled Tribes and Other Backward Classes who are also
covered under any other clauses of Para 3(II)(c) above, viz., those coming under the category of Exservicemen, persons
domiciled in the State of J&K, deafmute and orthopaedically handicapped etc. will be eligible for grant of cumulative
Column 1 Column 2
Ministry of Railways (Railway Board) I.R.S.E.
I.R.S.M.E.
I.R.S.E.E.
I.R.S.S.E.
I.R.S.S.
Central Public Works Department C.E.S. Group A
Directorate General Ordnance Factories I.O.F.S. Group A
Central Electricity Authority C.P.E. Service Gr B
Ministry of Road Transport and Highways Central Engineering Service Gr. A (Roads)
Ministry of Telecommunication and
Information Technology, Deptt. of
Telecommunication & Deptt. of Posts
AEE of P&T Building Works Gr A Service,
Engineer in Indian Radio Regulatory Service Gr A
Indian Telecommunication Service Group A,
J.T.O. (G.C.S. Gr. B)
Directorate General of Supplies and
Disposals
I.I.S. Gr A,
I.S.S. Gr A
Central Water Commission Central Water Engineering Service Gr A
Geological Survey of India Assistant Executive Engineer Gr A
Min of Science and Technology, Deptt. of
Science and Technology
Survey of India Gr A Service
Border Roads Organisation BRES Gr. A
Indian Navy Indian Naval Armament Service
Military Engineer Services Indian Defence Service of Engineers (lDSE) Group A
AEE(QS&C( in Military Engineer Service (MES) Surveyor Cadre
7/24/2019 English_Notice_ESE_2016 (1).pdf
5/24
5
relaxationunderboththecategories.
Note II : The term exservicemen will apply to the persons who are defined as Exservicemen in the Exservicemen (Re
employmentinCivilServicesandPosts)Rules,1979,asamendedfromtimetotime.
NoteIII:TheageconcessionunderPara3(ii)(c)(v)and(vi)willnotbeadmissibletoExServicemenandCommissionedOfficers
includingECOs/SSCOs,whoarereleasedonownrequest.
NoteIV:NotwithstandingtheprovisionofagerelaxationunderPara3(ii)(c)(vii)above,aphysicallyhandicappedcandidatewill
beconsideredtobeeligibleforappointmentonlyifhe/she(aftersuchphysicalexaminationastheGovernmentorappointing
authority,asthecasemaybe,mayprescribe) isfoundtosatisfytherequirementsofphysicalandmedicalstandardsforthe
concernedService/PoststobeallocatedtothephysicallyhandicappedcandidatebytheGovernment.
NoteV:Acandidatewillbeeligibletogetthebenefitofcommunityreservationonlyincasetheparticularcastetowhichthe
candidatesbelongisincludedinthelistofreservedcommunitiesissuedbytheCentralGovernment.Ifacandidateindicatesin
his/herapplicationformforEngineeringServicesExaminationthathe/shebelongstoGeneralcategorybutsubsequentlywrites
totheCommissiontochangehis/hercategorytoareservedone,suchrequestshallnotbeentertainedbytheCommission.
Candidates seeking reservation/relaxation benefits available for SC/ST/OBC/PH/Ex-Servicemen must ensure that they
are entitled to such reservation/relaxation as per eligibility prescribed in the Rules/Notice. They should be in possession of all
the requisite certificates in the prescribed format in support of their claim as stipulated in the Rules/Notice for such benefits,
and these certificates should be dated earlier than the due date (closing date) of the application (Prescribed Format of Disability
Certificate should be submitted by Physically Handicapped candidates as per Form IV of Department of Personnel &
Trainings Office Memorandum No. 36035/1/2012-Estt.(Res.) dated 29.11.2013 as at Annexure-III).
Whiletheaboveprinciplewillbefollowedingeneral,theremaybeafewcaseswheretherewasalittlegap(say23months)
between the issuance of a Government Notifications enlisting a particular community in the list of any of the reserved
communitiesandthedateofsubmissionoftheapplicationbythecandidate.Insuchcasestherequestofchangeofcommunity
fromGeneraltoReserved may be considered by theCommissiononmerit.
N.B.The candidature of a personwhoisadmittedtotheexaminationundertheageconcessionmentionedinPara 3(II)(b)
above
shall
be
cancelled
if,
after
submitting
his/her
application
he/she
resigns
from
service
or
his/her
services
are
terminatedbyhis/herdepartment/office eitherbeforeoraftertakingtheexamination. He/shewill,however,continuetobe
eligibleifhe/sheisretrenchedfromtheserviceorpostaftersubmittinghis/herapplication. Acandidatewhoaftersubmitting
his/her application to the department is transferred to other department/office will be eligible to compete under
departmentalageconcession.
SAVEASPROVIDEDABOVETHEAGELIMITSPRESCRIBEDCANINNOCASEBERELAXED.
ThedateofbirthacceptedbytheCommissionisthatenteredintheMatriculationorSecondarySchoolLeavingCertificate
or in a certificate recognised by an Indian University as equivalent to Matriculation or in an extract from a Register of
matriculatesmaintainedbyaUniversity,andthatextractmustbecertifiedbytheproperauthorityoftheUniversityorinthe
HigherSecondaryoranequivalentexaminationcertificate.Thesecertificatesarerequiredtobesubmittedalong with the
Detailed Application Forms which will be required to be sub mitted by the candidates who qualify on the result of the
writtenpartoftheexamination.
No other document relating to age like horoscopes, affidavits, birth extracts from Municipal Corporation, service records
and
the
like
will
be
accepted.
The
expression
Matriculation/Secondary
Examination
Certificate
in
this
part
of
the
instruction
includesthealternativecertificatesmentionedabove.
NOTE 1 : CANDIDATES SHOULD NOTE THAT ONLY THE DATE OF BIRTH AS RECORDED IN THE MATRICULATION/SECONDARY
EXAMINATION CERTIFICATE OR AN EQUIVALENT CERTIFICATE ON THE DATE OF SUBMISSION OF APPLICATION WILL BE
ACCEPTEDBYTHECOMMISSIONANDNOSUBSEQUENTREQUESTFORITSCHANGEWILLBECONSIDEREDORGRANTED.
NOTE2:CANDIDATESHOULDALSONOTETHATONCEADATEOFBIRTHHASBEENCLAIMEDBYTHEMANDENTEREDINTHE
RECORDS OF THE COMMISSION FOR THE PURPOSE OF ADMISSION TO AN EXAMINATION, NO CHANGE WILL BE ALLOWED
SUBSEQUENTLY(ORATANYOTHEREXAMINATIONOFTHECOMMISSION)ONANYGROUNDWHATSOEVER.
NOTE3: CANDIDATESSHOULDEXERCISEDUECAREWHILEENTERINGTHEIRDATEOFBIRTHINTHERESPECTIVECOLUMNOF
THEAPPLICATIONFORM. IFONVERIFI CATION ATANY SUBSEQUENT STAGE, ANY VARIATION IS FOUND INTHEIRDATEOF
BIRTH FROM THE ONE ENTERED IN THEIR MATRICU LATION OR EQUIVALENT EXAMINA TION CERTIFICATE, DISCIPLINARY
ACTION WILL BE TAKEN AGAINSTTHEMBYTHECOMMISSIONUNDERTHERULES.
(III) MinimumEducationalQualification:
Foradmission
to
the
examination,
a
candidate
must
have
(a) obtainedadegreeinEngineeringfromaUniversityincorporatedbyanActoftheCentralorStateLegislature inIndia
orotherEducationalInstitutionsestablishedbyanActofParliamentordeclaredtobedeemedasUniversitiesunderSection3
oftheUniversityGrantsCommission Act, 1956;or
(b) passedSectionsAandBoftheInstitutionExaminations oftheInstitution of Engineers (India);or
(c) obtained a degree/diploma in Engineering from such foreign University/College/Institution and under such
conditionsasmayberecognisedbytheGovernmentforthepurposefromtimetotime,or
(d) passedGraduateMembershipExaminationoftheInstitutionofElectronicsandTelecommunication Engineers(India);
or
(e) passedAssociateMembershipExamination PartsIIandIII/SectionsAandBoftheAeronautical SocietyofIndia;or
7/24/2019 English_Notice_ESE_2016 (1).pdf
6/24
6
(f) passedGraduate MembershipExaminationoftheInstitutionofElectronicsandRadioEngineers,Londonheldafter
November,1959
Provided that a candidate for the postof Indian NavalArmament Service (ElectronicsEngineeringPosts) and IndianRadio
RegulatoryServiceGrAmaypossessanyoftheabovequalificationsorthequalificationmentionedbelownamely:
M.Sc. degree or its equivalent with Wireless Communication, Electronics, Radio Physics or Radio Engineering as a special
subject.
NOTE1Acandidatewhohasappearedatanexaminationthepassingofwhichwouldrenderhim/hereducationallyqualified
forthisexamination,buthasnotbeen informedoftheresult,mayapplyforadmissiontotheexamination. Acandidate who
intends to appear at such a qualifying examination may also apply. Such candidates will be admitted to the examination, if
otherwiseeligible,buttheiradmissionwouldbedeemedtobeprovisionalandsubjecttocancellation, iftheydonotproduce
proofofhavingpassedtherequisitequalifying examinationalongwiththeDetailedApplicationFormwhichwillberequired
tobesubmittedbythecandidateswhoqualifyontheresultofwrittenpartoftheexamination.
NOTE2Inexceptionalcases,theCommission may treat a candidate,whohasnotanyofthequalificationsprescribedinthis
rule,aseducationally qualifiedprovidedthathe/shehaspassedexaminationsconductedbyotherinstitutionsthestandard
ofwhichintheopinionoftheCommissionjustifieshis/heradmissiontotheexamination.
NOTE3Acandidatewho isotherwisequalifiedbutwhohastakenadegreefromaforeignUniversitywhichisnotrecognised
by Government, may also apply to the Commission and may be admitted to the examination at the discretion of the
Commission.
(IV)MedicalExamination
CandidatesfinallyrecommendedbytheCommissiononthebasisofEngineeringServicesExamination, 2016shallberequired
toundergomedicalexamination.
(a) Everycandidate,onbeingfinallyrecommended byCommissionwillberequiredtoundergomedicalexaminationasand
when so decided by the Ministry of Railways (Railway Board) irrespective of the fact that he/she has appeared for such
medicalexaminationinthepastandfoundfit/unfitonthebasisofearlierexamination.
(b)The
medical
examination
will
be
conducted
at
various
Railway
Hospitals
under
Ministry
of
Railways
(Railway
Board).
Other
additionalinstructionsforcandidatesarelistedatAnnexureII.ThefindingsoftheRailwaysMedicalBoardwillbetakenasfinal
andbindingforallallotmentpurposes.
(V)Physicalstandards
CandidatesmustbephysicallyfitaccordingtophysicalstandardsforadmissiontoEngineeringServicesExamination,2016as
perguidelinesgiveninAppendixIIoftheRulesfortheEngineering Services Examination, 2016published inthe Gazette of
IndiaExtraordinarydated27.02.2016.
4.FEE:
Candidates (excepting Female/SC/ST/ PH who are exempted from payment of fee) are required to pay a fee of Rs.200/
(Rupees Two hundred only) either by depositing the money in any Branch of SBI by cash or by using net banking
facility of State Bank of India/State Bank of Bikaner & Jaipur/State Bank of Hyderabad/State Bank of
Mysore/State Bank ofPatiala/StateBankofTravancoreorbyusingVisa/MasterCredit/Debitcard.
Note :1Applicantswhooptfor"Paybycash"modeshouldprintthesystemgeneratedPayinslipduringPartIIreg istration
and
deposit
the
fee
at
thecounter
of
SBI
Branch
on
the
next
working
day
only.
"Pay
by
cash"mode
option
will
be deactived at23.59 hours of 24.03.2016 i.e. onedaybeforetheclosingdate;however,applicantswhohavegenerated
theirPayinslipbeforeitisdeactivatedmaypayatthecounterofSBIBranchduringbanking hours on the closing date.Such
applicantswhoareunabletopaybycashontheclosingdatei.e.duringbankinghourstoSBIBranch,forreasonwhatsoever,
evenifholdingavalidPayinslip,willhavenootherofflineoptionbuttooptforonlineDebit/CreditCardorInternetBanking
Paymentmode on the closing date i.e. till23.59hoursof25.03.2016.
Note : 2 Candidates should note that payment of examination fee can be made only through the modes prescribed above.
Payment of fee through any other mode is neither valid nor acceptable. Applications submitted without the prescribed
fee/mode(unlessremissionoffeeisclaimed)shallbesummarilyrejected.
Note : 3 Fee once paid shall not be refunded under any circumstances nor can the fee be held in reserve for any other
examinationorselection.
Note:4Fortheapplicantsinwhosecasepaymentsdetailshavenotbeenreceived from the bank, they will betreatedas
fictitiouspaymentcasesandtheirapplicationswillberejectedinthefirst instance.Alistofallsuchapplicantsshallbemade
available
on
the
Commission
website
within
two
weeks
after
the
last
day
of
submission
of
online
application.
The
applicants
shallberequiredtosubmittheproofoftheirfeepaymentwithin10daysfromthedateofsuchcommunication eitherbyhand
or by speed post to the Commission. On receipt of documentary proof, genuine fee payment cases will be considered and
theirapplicationswillberevived,iftheyareother wiseeligible.
ALL FEMALE CANDIDATES AND CANDIDATES BELONGING TO SCHEDULED CASTES/SCHEDULED TRIBES/PHYSICALLY HANDI
CAPPED CATEGORIES ARE EXEMPTED FROM PAYMENT OF FEE. NO FEE EXEMPTION IS, HOWEVER, AVAILABLE TO OBC
CANDIDATESANDTHEYAREREQUIREDTOPAYTHEPRESCRIBEDFEEINFULL.
Physicallyhandicappedpersonsareexemptedfromthepaymentoffeeprovidedtheyareotherwiseeligibleforappointment
to the Services/Posts tobefilledontheresultsofthisexaminationonthebasisofthestandardsofmedicalfitnessforthese
Services/Posts (including any concessions specifically extended to the physically handicapped). A physically handicapped
candidate claiming age relaxation/fee concession will be required by the Commission to submit along with their Detailed
7/24/2019 English_Notice_ESE_2016 (1).pdf
7/24
7
Application Form, a certified copy of the certificate from a Government hospital/Medical Board in support of his claim for
beingphysicallyhandicapped.
NOTE:Notwithstanding theaforesaidprovisionforagerelaxation/feeexemption,a physicallyhandicappedcandidatewillbe
consideredtobeeligibleforappointmentonlyifhe/she(aftersuchphysicalexaminationastheGovernmentortheappointing
authority,asthecasemaybe,mayprescribe) isfoundtosatisfytherequirementsofphysicalandmedicalstandardsforthe
concernedServices/PoststobeallocatedtoPhysicallyHandicappedcandidatesbytheGovernment.
NOTE : Applications without the pre scribedfee(unlessremissionoffeeisclaimed)shallbesummarilyrejected.
5.HOWTOAPPLY:
(a) Candidates are required to apply Online using the link www.upsc online.nic.in. Detailed instructions forfilling
up online applications are avail ableontheabovementionedwebsite.
(b) The applicants are advised to submit only single application; however, ifdue to any unavoidable situation, ifhe/she
submits another/multiple applications, then he/ she must ensure that application with the higher RID is complete in all
respects like applicants' details, examination centre, photograph, signature, fee etc. The applicants who are
submitting multiple applications should note that only the applications with higher RID (Registration ID) shall be
entertained by theCommissionandfeepaidagainstoneRIDshallnotbeadjustedagainstanyotherRID.
(c)All candidates,whetheralready inGovernmentService,or inGovernmentowned industrialundertakingsorothersimilar
organisationsorinprivateemployment,shouldapplyonlinedirecttotheCommission.
Persons,alreadyinGovernmentservicewhetherinapermanentortemporarycapacityorasworkchargedemployeesother
thancausalordailyratedemployeesorthoseservingunderpublicenterprisesare,however,requiredtoinformtheirHeadof
Office/Department that they have applied for the Examination. Candidates should note that in case communication is
received from their employer by the Commission withholding permission to the candidates applying for/appearing at the
Examination, theirapplicationwillbeliabletoberejected/candidaturewillbeliabletobecancelled.
NOTE 1 : WHILE FILLING IN HIS/HER APPLICATION FORM, THE CANDIDATE SHOULD CAREFULLY DECIDE ABOUT HIS/HER
CHOICEFORTHECENTREANDENGINEERINGDISCIPLINEFORTHEEXAMINATION.
IF
ANY
CANDIDATE
APPEARS
AT
A
CENTRE/ENGINEERING
DISCIPLINE
OTHER
THAN
THE
ONE
INDICATED
BY
THE
COMMISSIONINHIS/HERE ADMISSIONCERTIFICATEPAPERSOFSUCHACANDIDATEWILLNOTBEVALUED ANDHIS/HER
CANDIDATUREWILLBELIABLETOCANCELLATION.
NOTE 2: SUITABLE PROVISIONS FOR INFORMATION REGARDING USE OF SCRIBES BY THE BLIND CANDIDATES AND
CANDIDATESWITHLOCOMOTORDISABILITYANDCEREBRALPALSYWHEREDOMINANT(WRITING)EXTREMITYISAFFECTED
TO THEEXTENTOF SLOWING THEPERFORMANCE OF FUNCTION (MINIMUMOF40% IMPAIRMENT)HAVEBEEN MADE IN
THEONLINEAPPLICATION.
NOTE 3: INCOMPLETE OR DEFECTIVE APPLICATIONS SHALL BE SUMMARILY REJECTED. NO REPRESENTATION OR
CORRESPONDENCE REGARDINGSUCHREJECTIONSHALLBEENTERTAINEDUNDERANYCIRCUMSTANCES.
CANDIDATESARENOTREQUIREDTOSUBMITHARDCOPY/PRINTOUTOFTHEIRAPPLICATIONTOTHECOMMISSIONATTHIS
STAGE.
The candidatesapplying for the Examinationshouldensurethat theyfulfil all theeligibility conditionsforadmission to the
Examination. Their admission at all the stages of examination for which they are admitted by the Commission viz. Written
Examinationand
Interview
Test
will
be
purely
provisional,
subject
to
their
satisfying
the
prescribed
eligibility
conditions.
If
on
verificationatanytimebeforeorafterthewrittenexaminationorInterviewTest, it is found that they do not fulfilanyofthe
eligibilityconditions,theircandidatureoftheExaminationwillbecancelledbytheCommission.Candidatesarerequestedto
keepreadytheattestedcopiesofthefollowingdocumentsforsubmissiontotheCommissionsoonafterthedeclarationofthe
resultsofthewrittenExaminationwhich islikely tobedeclared in themonthofDecember,2016.
1. CertificateofAge.
2. CertificateofEducationalQualification.
3. Certificate in support of claim to belong to Scheduled Castes, Scheduled Tribes and Other Backward Classes,
whereverapplicable.
4. Certificateinsupportofclaimforage/feeconcession,whereverapplicable.
Immediately after the declaration of the written results successful candidates will be intimated by the Commission
electronically and they shall be askedtosubmitDetailedApplicationForm(DAF)online.Thesuccessfulcandi dateshaveto
sendtheprintoutofthisDAFwitheachpagedulysignedalongwiththeattestedcopiesoftheabovementionedcertificatesto
theCommission
at
that
time.
Orginals
will
have
to
be
produced
at
the
time
of
interview.
The
interview
letter
to
the
candidates
mayalsobeissuedelectronically.
Ifanyoftheirclaims isfoundtobe incorrect,theymayrenderthemselves liabletodisciplinaryactionbytheCommission in
terms of Rule 11 of the Rules for Engineering Services Examination, 2016 notified in the Gazette of India Extraordinary
dated27th
February,2016andalsoreproducebelow:
ACandidatewhoisorhasbeendeclaredbytheCommissiontobeguiltyof:
(i) obtainingsupportforhiscandidaturesbyanymeans;or
(ii) impersonating;or
(iii) procuringimpersonationbyanyperson;or
(iv) submittingfabricateddocumentsordocumentswhichhavebeentamperedwith;or
7/24/2019 English_Notice_ESE_2016 (1).pdf
8/24
8
(v) makingstatementswhichareincorrectorfalseorsuppressingmaterialinformation;or
(vi) resortingtoanyotherirregularorimpropermeansinconnectionwithhiscandidaturefortheexamination;or
(vii) usingunfairmeansduringtheexamination; or
(viii) writingirrelevantmatterincludingobscenelanguageorpornographicmatterinthescript(s);or
(ix) misbehavinginanyothermannerintheexaminationhall;or
(x) harassingordoingbodilyharmtothestaffemployedbytheCommissionfortheconductoftheirexamination;or
(xi) being inpossessionoforusinganycellular/mobilephone/pager/bluetoothoranyelectronicequipmentordeviceor
any,otherequipmentcapableofbeingusedasacommunication deviceduringtheexamination; or
(xii) violatinganyoftheinstructionsissuedtocandidatesalongwiththeiradmissioncertificatepermittingthemtotakethe
examination; or
(xiii) attempting to commit or as the case may be abetting the commission of all or any of the acts specified in the
foregoingclauses.
Mayinadditiontorenderinghimselfliabletocriminalprosecutionbeliable
(a) tobedisqualifiedbytheCommissionfromtheexaminationforwhichheisacandidate;and/or
(b) tobedebarredeitherpermanentlyorforaspecifiedperiod
(i) bytheCommissionfromanyexaminationorselectionheldbythem;
(ii) bytheCentralGovernment,fromanyemploymentunderthem;and
(c) ifheisalreadyinserviceundertheGovernment,todisciplinaryactionundertheappropriaterules:
Providedthatnopenaltyunderthisruleshallbeimposedexceptafter
(i) givingthecandidateanopportunityofmakingsuchrepresentationinwritingashemaywishtomakeinthatbehalf;
and
(ii) takingtherepresentationifanysubmittedbythecandidate,withintheperiodallowedtohim,intoconsideration.
6.LASTDATEFORSUBMISSIONOFAPPLICATIONS:
TheOnlineApplicationscanbefilledupto25th
March,2016till11.59PMafterwhichthelinkwillbedisabled.
7.CORRESPONDENCE
WITH
COMMISSION:
TheCommissionwillnotenterintoanycorrespondencewiththecandidatesabouttheircandidatureexceptinthefollowing
cases:
(i) The eligible candidates shall be issued an eAdmission Certificate three weeks before the commencement of the
examination. The eAdmission Certificate will be made available in the UPSC website [www.upsc. gov.in] for
downladingbycandidates.NoAdmissionCertificatewillbesentbypost.Fordownloadingthee Admission Certificate/ e
AdmitCard the Candidate must havehis/hervitalparameters likeRID&DateofBirthorRollNo.(ifreceived&dateofbirth
orfathersname)availablewithhim/her.
(ii) If a candidate does not receive his/her eadmit card or any other communication regarding his/her candidature for the
examination two week before the commencement of the examination, he/she should at once contact the Commission.
Information in this regard can also be obtained from the Facilitation Counter located in the Commissions Office either in
person or over phone Nos.01123381125/01123385271/01123098543. Incase no communication isreceived in
theCommissionsOffice from the candidateregarding nonreceipt ofhis/her eAdmissionCertificate atleast
one
weekbefore
the
examination,
he/she
himself/herself
will
be
solely
responsible
for
non
receipt
of
his/her
eAdmissioncertificate.
No candidate will ordinarily be allowed to take the examination unless he/she holds eAdmission Certificate for the
examination. On receipt of eAdmission Certificate, check it carefully andbring discrepancies/error, if any, to the notice of
UPSCimmediately.
The candidatesshouldnote thattheiradmissiontotheexaminationwillbepurelyprovisionalbasedontheinformationgivenby
themintheApplicationForm. ThiswillbesubjecttoverificationofalltheeligibilityconditionsbytheUPSC.
(iii) The mere fact that an e AdmissionCertificateofadmissiontotheExaminationhasbeenissuedtoacandidatewill
notimplythathis/hercandidaturehasbeenfinallyclearedbytheCommission,orthattheentriesmadebythecandidatein
his/her applicationfortheExaminationhavebeenacceptedbytheCommissionastrueandcorrect.Candidatesmay
notethattheCommissiontakesuptheverification ofeligibilityconditionsof a candidate,withreferencetooriginaldocuments,
onlyafterthecandidatehasqualified for Interview or PersonalityTest ontheresultofthewrittenpartoftheexamination.
Unlesscandidatureis formallyconfirmedby theCommission,itcontinuestobeprovisional.
The
decision
of
the
Commission
as
to
the
acceptance
of
the
application
of
a
candidate
and
his/her
eligibility
or
otherwise
for
admissiontotheExaminationshallbefinal.CandidatesshouldnotethatthenameintheAdmissionCertificate,insomecases
may be abbreviated duetotechnicalreasons.
(iv) If a candidate receives an e AdmissionCertificateinrespectofsomeothercandidateonaccountofhandlingerror,
thesameshouldbeimmediatelybrought to the notice ofCommissionwitharequesttoissuethecorrect e
AdmissionCertificate. Candidates maynotethattheywillnotbeallowedtotaketheexaminationonthestrengthofane
AdmissionCertificateissuedinrespectofanothercandidate.
(v)
Candidates must ensure thattheiremailidsgivenintheirapplicationsarevalidandactive.
IMPORTANT: ALL COMMUNICATIONS TO THE COMMISSIONSHOULDINVARIABLYCONTAINTHE
FOLLOWINGPARTICULARS:
1. NAME AND YEAR OF THEEXAMINATION.
7/24/2019 English_Notice_ESE_2016 (1).pdf
9/24
9
2. REGISTRATIONID(RID).
3. ROLLNO.(IFRECEIVED).
4. NAMEOFCANDIDATE INFULLANDINBLOCKLETTERS.
5. VALID AND ACTIVE EMAILADDRESS
6. COMPLETEPOSTALADDRESS AS GIVEN IN THEAPPLICATION.
N.B.(i)COMMUNICATIONSNOTCONTAININGTHEABOVEPARTICULARSMAYNOTBEATTENDEDTO.
N.B.(II)IFALETTER/COMMUNICATIONISRECEIVEDFROMACANDIDATEAFTERANEXAMINATIONHASBEENHELDANDIT
DOESNOTGIVEHIS/HERFULLNAMEANDROLLNUMBER,ITWILLBEIGNOREDANDNOACTIONWILLBETAKENTHEREON.
8.Detailsofthecategories/subcategoriesofdisabilities (functionalclassificationandPhysical Requirements) identified
forthevariousServices/posts:
Forbeingconsideredagainstthevacanciesreservedforthem,thephysicallydisabledpersonsshouldhavedisabilityofforty
percent(40%)ormore.Thefunctionalclassificationintheir case shall be consistent with therequirementsoftheconcerned
services/posts as detailed in AnnexureI. However, such candidates shall be required to meet the physical
requirements/abilities as detailed in AnnexureI and to submit Disability Certificate in the prescribed format as detailed in
AnnexureIII..
AnnexureI
AListofServices/PostsidentifiedsuitableforPhysicallyDisabledCategoryalongwiththephysicalrequiremeatsand
functionalclassifications*.
Sl. No. Name of Services Functional
Classification
Physical Requirements
Category I-Civil Engineering
1. Indian Railway Service of Engineers OA or OL or HI S,ST,BN,W,SE,MF,C,R,W&RW
2. Indian Railway Stores Service OA or OL or HI S,ST,BN,W,SE,MF,C,R,W&RW
3. Central Engineering Service OA or OL or HI As per MOSJ & E instructions
4. Indian Defence Service of Engineers (Civil Engg.) PD or OA B,S,ST,W,SE,H&RW
5. Indian Ordnance Factories Service(Civil Engg. Br.) OA or PD B,S,ST,W,SE&H
6 Central Water Engineering Service Gr A OA or OL S,ST,BN,W,SE,MF,C,R,W&RW
7. Central Engineering Service (Roads) Gr. A OA or OL or PD/HI B,S,ST,W,SE,H,RW,D,&W
8. AEE in P & T Build. Works Gr. A OA MF,PP,L,KC,BN,S,ST,W,SE,H&RW
9. AEE (Civil) in Border Roads Organization OA B,S,ST,W,SE,H&RW
10. AEE (QS&C) in Military Engineer Service(MES)
Surveyor Cadre
PD or OA B,S,ST,W,SE,H&RW
Category II-Mechnical Engineering
1. Indian Railway Service of Mechanical Engineers OA or OL S,ST,BN,W,SE,MF,C,R,W&RW
2. Indian Railway Store Service OA or OL or HI S,ST,BN,W,SE,MF,C,R,W&RW
3.Central Water Engineering Service Gr A
OA or OL S,ST,BN,W,SE,MF,C,R,W&RW
4. Central Power Engg. Service Gr. A&B
(Mech. Engg. Posts)
OL ST,S,SE,MF,BN,KC,H&C
5. Indian Ordnance Factories Service
(Mech. Engg. Branch)
HI(PD) or OA or OL B,SE,H&W
6. Indian Naval Armament Service OL S,SE,H&RW
7. Assistant Executive Engr. in the corps of EME PD F,PP,L,KC,B,S,ST,W,SE&RW
8. Asstt. Naval Store Officer in Indian Navy OL S,SE,H&RW
9. Central Electrical & Mechanical Engineering
Service
OL or HI As per MOSJ&E instructions
10. Geological Survey of India Engineering Service Gr A PD KC
11. Indian Supply Service Gr A (Mech. Engg.) OA or OL MF,PP,L,KC,BN,S,ST,W,RW&C
12. Indian Defence Service of Engineers
(Mech. Engg.)
PD or OA B,S,ST,B,W,SE,H&RW
13. Central Engineering Service (Roads) Group A
(Mechanical Engg. Post)
OA or OL or PD/HI B,S,ST,W,SE,H,RW,D,&W
14. Assistant Excutive Engineer Group A (Electrical
&Mechanical) (Mechnanical Engineering Post) in
Border Roads Engineering Service Gr. A
OA B,S,ST,W,SE,H&RW
Category III-Electrical Engineering
1. Indian Railway Service of Electrical Engineers OA or OL or HI S,ST,BN,W,SE,MF,C,R,W
2. Indian Railway Store Service OA or OL or HI S,ST,BN,W,SE,MF,C,R,W&RW
3. Central Elect. & Mech. Engg. Service (Elect. Engg.) OL or HI As per MOSJ&E instructions
4. Indian Naval Armament Service OL S,SE,H&RW
7/24/2019 English_Notice_ESE_2016 (1).pdf
10/24
10
5. Indian Ordnance Factories Service (Elect.) OL or PD B,ST,W&SE
6.
Central Power Engg. Service Gr. A&B
(Elect. Engg. Posts)
OL, HI S,ST,BN,SE,W,MF,PP,L,KC,C&RW
7. Indian Defence Service of Engineers (Elect. Engg.) PD or OA B,S,ST,W,SE,H&RW
8. Asstt. Naval Store Officer in Indian Navy OL S,SE,H&RW
9. Indian Supply Service Gr A (Elect. Engg.) OA or OL MF,PP,L,KC,BN,S,ST,W,RW&C
10.
AEE Gr A(Elect. Engg.) in Corps of EME, Min of
Defence.PD or OA S,ST,B,W,SE
11. AEE in P&T Bldg. works Gr. A OA MF,PPL,K,C,BN,S,ST,W,SE,H&RW
Category IV-Electronics & Telecommunication Engineering
1. Indian Railway Service of Signal Engineers OA or OL S,ST,BN,W,SE,ME,C,R,W&RW2. Indian Railway Store Service OA or OL or HI S,ST,BN,W,SE,ME,C,R,W&RW
3. Indian Ordnance Factories Service (Engg. Branch) OL or PD B,ST,W&SE
4. Indian Naval Armament Service OL S,SE,H&RW
5. Asstt. Exe. Engineer in the Corps of EME PD or OA S,ST,B,W,SE
6. Indian Radio Regulatory Service Gr A OA or OL S,H&RW/Speaking
7. Asstt. Naval Store Officer Gr. I OL S,SE,H&RW
8. Indian Supply Service (Group A) (Elec. & Telecom) OA or OL ME,PP,L,KC,BN,S,ST,W,RW&C
9. Indian Telecom Service, Group A OL or OA or MW F,S,ST,W,SE,H&RW
10. Junior Telecom Officer Group B in ITS OL or OA or MW F,S,ST,W,SE,H&RW
11. Central Power Engineering Service Gr. A&B
(Elec. & Telecom)
OL, HI S,ST,BN,SE,W,MF,PP,L,KC,C&RW
*Thelist
is
subject
to
revision.
Theabbreviationsused(indicatedasbelow)areasperthespecificationinMinistryofSocialJusticeandEmpowerments
NotificationNo.1670/2004DDIIIdated1812007
OA=OneArmaffected,OL=OneLegaffected,HI=hearingImpaired,PD=partiallyDeaf,MW=MuscularWeaknessS=Sitting,
BN=Bending,SE=Seeing,RW=Reading&Writing,C=Communication,MF=ManipulationbyFingers,PP=Pulling&Pushing,
L=Lifting,KC=Kneeling&Croutching,ST=Standing,W=Walking,H=Hearing.
OH=OrthopaedicallyHandicapped,LD=Locomotor Disability,CP=CerebralPalsy.NOTE(I):ToavoidinconveniencelaterPHcandidatesshouldensurethattheirsubcategoryofdisabilitiesisidentifiedforprovidingreservation.NOTE(II):AlsopleasenotethatTemporaryDisabilityCertificatedoesnotconferuponthecandidates,thebenefitofbeingconsideredagainstthevacanciesreservedunderPHquota.NOTE(III):Pleaseensuresubmissionof DisabilityCertificateintheprescribedformatasdetailedatAnnexureIII.
AnnexureII
DetailsofZonalRailwayHospitals
ZoneFull NameofHospital HospitalAddress Tele. Nos.
CENTRALRAILWAYS
B.A.M.HOSPITAL DR.BABASAHABAMBEDKARRAILWAY
HOSPITAL,BYCULLA,MUMBAI400027
EASTERNRAILWAY B.R.SINGHHOSPITAL B.R.SINGHHOSPITAL,SEALDAH,KOLKATA
700001
EASTCENTRAL RAILWAY CENTRALHOSPITAL ECRAILWAY,KARBIGAHIYA,PATNA
803118
EASTCOASTRAILWAY CENTRALHOSPITAL MANCHESWAR,BHUBANESWAR751017
NORTHERNRAILWAY CENTRALHOSPITAL BASANTLANE,CHELMSFORDROAD,
CONNAUGHTPLACE,
DELHI
110001
NORTHCENTRALRAILWAY CENTRALHOSPITAL ALLAHABAD 211001
NORTHEASTERNRAILWAY LNMRHOSPITAL LALITNARAYANMISHRAHOSPITAL,
GORAKHPUR273012
NORTHEASTFRONTIERRAILWAY CENTRALHOSPITAL MALIGAON,GUWAHATI781011
NORTHWESTERNRAILWAY CENTRALHOSPITAL GANPATINAGAR,NEARJAIPURRAILWAY
STATION,JAIPUR 302006
SOUTHERNRAILWAY CENTRALHOSPITAL CONSTABLEROAD,AYANAVARAM,
PERAMBUR,CHENNAI600209
SOUTHCENTRALRAILWAY CENTRALHOSPITAL LALAGUDARAILWAYCOLONY,
SECUNDERABAD500003
7/24/2019 English_Notice_ESE_2016 (1).pdf
11/24
11
Recent PP size self
attested Photograph
(Showing face only) of
the person with
disabilit
SOUTHEASTERNRAILWAY CENTRALHOSPITAL GARDENREACHROAD,KOLKATA
700043
SOUTHEASTCENTRALRAILWAY CENTRALHOSPITAL BILASPUR 495004
SOUTHWESTERNRAILWAY CENTRALHOSPITAL GADAGROAD,HUBLI 580023
WESTERNRAILWAY J.R.H.HOSPITAL JAGJIVANRAMHOSPITAL,MARATHA
MANDIRMARG,MUMBAICENTRAL,
MUMBAI400001
WESTCENTRALRAILWAY CENTRALHOSPITAL INDIRAMARKET,JABALPUR 482001
Otheradditionalinstructionstothecandidatesformedicalexaminationareasunder:
(i)
MedicalExamination
Schedules/Venue
and
the
final
medical
status
(Fit/Unfit/partially
Unfit/Temporarily
Unfit)
will
be
uploadedontheofficialwebsiteoftheIndianRailways(www.indianrailways.gov.in). Noseparatewrittencommunicationwill
besenttothecandidatesregardingtheseuploads.
(ii) ThecandidateswillhavetocarrythreesetsofFormforMedicalBoardReport2016tobedownloadedfromthe
MinistryofRailwaysofficialwebsitei.e.www.indianrailway.gov.in>>MinistryofRailways>>RailwayBoard>>Newsand
Recruitment>>EngineeringServicesUpdates.
(iii) ThecandidatesshouldcarryGovernmentissuedPhotoIDcardandthreepassportsizephotographswiththem.
CandidatesrecommendedagainstPersonswithDisabilities(PwD)vacanciesshouldcarrytheirDisabilityCertificateinoriginal
aspertheformatprescribedalongwithadditionalphotocopyofthesame.
AnnexureIII
Form IV
DISABILITYCERTIFICATE
(IncasesotherthanthosementionedinFormsIIandIII)
(NAMEANDADDRESSOFTHEMEDICALAUTHORITYISSUINGTHECERTIFICATE)(SeeRule4)
CertificateNo. Date:
ThisistocertifythatIhavecarefullyexaminedShri/Smt./Kum.______________________________
Son/wife/daughterofShri__________________________________________________________________
DateofBirth____________________Age___________________years,male/female__________________
(DD/MM/YY)
RegistrationNo.__________________permanentresidentofHouseNo.________________Ward/Village/
_________________Street__________________ PostOffice__________________District__________
State_________________,whosephotographisaffixedabove,andamsatisfiedthathe/Sheisacaseof
_____________Disability. His/herextentofpercentagephysicalimpairment/disabilityhasbeenevaluatedasper
guidelines(tobespecified)andisshownagainsttherelevantdisabilityinthetablebelow:
S.No.
Disability
Affected
Part
of
Body
Diagnosis Permanentphysical
impairment/mental
disability(in%)
1. Locomotordisability @
2. Lowvision #
3. Blindness BothEyes
4. HearingImpairment $
7/24/2019 English_Notice_ESE_2016 (1).pdf
12/24
12
5. Mentalretardation X
6. Mentalillness X
(Pleasestrikeoutthedisabilitieswhicharenotapplicable.)
2. Theaboveconditionisprogressive/nonprogressive/likelytoimprove/notlikelytoimprove.
3. Reassessmentofdisabilityis:
(i) notnecessary,
Or
(ii)isrecommended/after________years__________months,andthereforethiscertificateshallbe
Validtill_______________ _________________________________
(DD) (MM) (YY)
@ e.g.Left/Right/botharmslegs
# Singleeye/botheyes
$
Left/Right/bothears
4. Theapplicanthassubmittedthefollowingdocumentasproofofresidence:
(AuthorizedSignatoryofnotifiedMedicalAuthority)
(NameandSeal)
Countersigned
{Countersignatureandsealofthe
CMO/MedicalSuperintendent/Head
ofGovernmentHospital,incasethe
certificateisissuedByamedical
authoritywhoisnota government
servant(withseal)}
Note:Incasethiscertificateisissuedby amedicalauthoritywhoisnotagovernmentservant,itshallbevalidonlyif
countersignedbytheChiefMedicalOfficeroftheDistrict.
Note:TheprincipalruleswerepublishedintheGazetteofIndiavidenotificationnumberS.O.908(E),dated31st
December,
1996.
9.WITHDRAWALOFAPPLICATIONS:NOREQUESTFORWITHDRAWALOFCANDIDATURERECEIVEDFROMACANDIDATEAFTER
HE/SHEHASSUBMITTEDHIS/HERAPPLICATIONWILLBEENTERTAINEDUNDERANYCIRCUMSTANCES.
NatureofDocument DateofIssue Detailsofauthorityissuingcertificate
Signature/Thumb
impressionofthe
personinwhose
favourdisability
certificateisissued.
7/24/2019 English_Notice_ESE_2016 (1).pdf
13/24
13
(SANJAYMEHRISHI)
JOINTSECRETARY,
UNIONPUBLICSERVICECOMMISSION
APPENDIXI
PLANOFEXAMINATION
1.Theexaminationshallbeconductedaccordingtothefollowingplan:
Part I.The written examination will comprise two sectionsSection I consisting only of objective type of questions and
SectionIIofconventionalpapers.BothSectionswillcovertheentiresyllabusoftherelevantengineeringdisciplinesviz.Civil
Engineering, Mechanical Engineering, Electrical Engineering and Electronics and Telecommunications Engineering. The
StandardandsyllabiprescribedforthesepapersaregiveninScheduletotheAppendix.Thedetailsofthewrittenexamination
i.e.subjectaregiveninpara2below.
PartII.Personalitytestcarryingamaximumof200marksofsuchofthecandidateswhoqualifyonthebasisofthewritten
examination.
2.Thefollowingwillbethesubjectsforthewrittenexamination:
Subject Duration Maximum
Marks
(1) (2) (3)
CategoryICIVILENGINEERING
SectionI.ObjectivePapers
GeneralAbilityTest 2hrs. 200
(PartA:GeneralEnglish)
(PartB:GeneralStudies)
CivilEngineeringPaperI 2hrs. 200
CivilEngineeringPaperII 2hrs. 200
SectionIIConventional Papers
CivilEngineeringPaperI 3hrs. 200
CivilEngineeringPaperII 3hrs. 200
TOTAL 1000
CategoryIIMECHANICALENGINEERING
SectionIObjectivePapers
GeneralAbilityTest 2hrs. 200
(PartA:GeneralEnglish)
(PartB:GeneralStudies)
MechanicalEngineering 2hrs. 200
PaperI
MechanicalEngineering 2hrs. 200
PaperII
SectionIIConventional Papers
Mechanical
Engineering
3
hrs.
200
PaperI
MechanicalEngineering 3hrs. 200
PaperII
TOTAL 1000
CategoryIIIELECTRICALENGINEERING
7/24/2019 English_Notice_ESE_2016 (1).pdf
14/24
14
SectionIObjectivePapers
GeneralAbilityTest 2hrs. 200
(PartA:GeneralEnglish)
(PartB:GeneralStudies)
ElectricalEngineeringPaperI 2hrs. 200
ElectricalEngineeringPaperII 2hrs. 200
SectionIIConventional
Papers
ElectricalEngineeringPaperI 3hrs. 200
ElectricalEngineeringPaperII 3hrs 200
TOTAL 1000
CategoryIV ELECTRONICS AND TELECOMMUNICATIONENGINEERING
SectionIObjectivePapers 2hrs. 200
GeneralAbilityTest
(PartA:GeneralEnglish)
(PartB:GeneralStudies)
ElectronicsandTelecom 2hrs. 200
munication
EngineeringPaperI
ElectronicsandTelecom 2hrs. 200
munication
EngineeringPaperII
SectionIIConventional Papers
ElectronicsandTelecom 3hrs. 200
munication
Engineering
Paper
I
ElectronicsandTelecom
munication
EngineeringPaperII 3hrs. 200
TOTAL 1000
Note. Candidates are advised to read carefully special instructions to candidates for conventional type tests and objective
typetests given inAppendixIII(PartAandPart B) includingthe procedureregardingfiling intheAnswerSheetof objective
typetestsintheExaminationHall.
3. InthePersonalityTestspecialattentionwillbepaidtoassessingthecandidatescapacityforleadership,initiativeand
intellectual curiosity,tactandothersocialqualities,mentalandphysicalenergy,powersofpracticalapplicationandintegrityof
character.
4. Conventional papersmustbeansweredinEnglish.QuestionpaperwillbesetinEnglishonly.
5. Candidatesmustwritethepapers intheir ownhand. In nocircumstancethey willbeallowedthehelpofscribeto
write answers for them. However, blind candidates and candidates with locomotor disability and cerebral palsy where
dominant(writing)extremity isaffectedtotheextentofslowingtheperformanceoffunction(minimumof40%impairment)
willbeallowedtowriteEngineeringServicesExaminationwiththehelpofascribe.
Compensatorytimeoftwentyminutesperhourshallbepermittedfortheblindcandidatesandthecandidateswith
locomotordisabilityandcerebralpalsywheredominant(writingextremityisaffectedtotheextentofslowingtheperformance
offunction(minimumof40%impairment)willalsobeallowedintheEngineeringServicesExamination.
7/24/2019 English_Notice_ESE_2016 (1).pdf
15/24
15
6 The Commission have discretion to fix minimum qualifying marks in any or all the papers of the examination. The
Objective Type papers as contained in SectionI of the Plan of theExamination will be evaluated first and evaluation of the
Conventional TypepaperscontainedinSectionIIofthePlanofExaminationwillbedoneonlyofthosecandidateswhoobtain
theminimumqualifyingmarksinObjectiveTypespapers,asfixedbytheCommission.
7. Markswillnotbeallottedformeresuperficialknowledge.
8. Deductionuptofivepercentofthemaximummarksforthewrittenpaperswillbemadeforillegiblehandwriting.
9. Credit will be given for orderly, effective and exact expression combined with due economy of words in the
conventionalpapersoftheexamination.
10. Inthequestionpapers,whereverrequired,SIunitswillbeused.
Note.Candidates will be supplied with standard tables/charts in SI units in the Examination Hall for reference purpose,
whereverconsiderednecessary.
11.Candidatesarepermittedtobringandusebatteryoperatedpocketcalculatorsforconventional(essay)typepapersonly.
LoaningorinterchangingofcalculatorsintheExaminationHallisnotpermitted.
It is also important to note that candidates are not permitted to use calculators for answering objective type papers (Test
booklets).Theyshouldnottherefore,bringthesameinsidetheExaminationHall.
12.CandidatesshoulduseonlyInternationalformofIndiannumerals(e.g.,1,2,3,4,5etc.)whileansweringquestionpapers.
SCHEDULETOAPPENDIXI.
StandardandSyllabi
The standard of paper in General Ability Test will be such as may be expected of an Engineering/Science Graduate. The
standardofpapersinothersubjectswillapproximatelybethatofanEngineeringDegreeExaminationofanIndianUniversity.
Therewillbenopracticalexaminationinanyofthesubjects.
GeneralAbilityTest
Part A : General English : The question paper in General English will be designed to test the candidates understanding of
Englishand
workman
like
use
of
words.
Part B : General Studies : The paper in General Studies will include knowledge of current events and of such matters of
everydayobservationandexperienceintheirscientificaspectsasmaybeexpectedofaneducatedperson.Thepaperwillalso
includequestionsonHistoryofIndiaandGeographyofanaturewhichcandidatesshouldbeabletoanswerwithoutspecial
study.
CIVILENGINEERING(forbothobjectiveandconventionaltypepapers)
PAPERI
1. BuildingMaterials
Timber : Different types and species of structural timber, densitymoisture relationship, strength in different directions,
defects,influenceofdefectsonpermissiblestress,preservation,dryandwetrots,codalprovisionsfordesigns.Plywood.
Bricks:Types,IndianStandardsclassification,absorption,saturationfactor,strengthinmasonry,influenceofmortarstrength
onmasonrystrength.
Cement:Compoundsof,differenttypes,settingtimesstrength.
CementMortar
:Ingredients,
proportions,
water
demand,
mortars
for
plastering
and
masonry.
Concrete:ImportanceofW/CRatio,strengthingredientsincludingadmixtures,workability,testingforstrengthelasticity,non
destructivetesting,mixdesignmethods.
2. SolidMechanics
Elastic constants, stress, plane stress, Mohrs circle of stress, strains, plane strain, Mohrs circle of strain combined stress;
Elastictheoriesoffailure;Simplebending,shear;Torsionofcircularandrectangularsectionsandsimplemembers.
3. StructuralAnalysis
Analysisofdeterminatestructuresdifferentmethodsincludinggraphicalmethods.
Analysis of indeterminate skeletal framesmoment distribution, slopedeflection, stiffness and force methods, energy
methods.MullerBreslaieprincipleandapplication.
Plasticanalysisofindeterminatebeamsandsimpleframesshapefactors.
4. DesignofSteelStructures
Principlesofworkingstressmethod/Designofconnections,simplemembers,Builtupsectionsandframes.DesignofIndustrial
roofs.
Principles
of
ultimate
load
design.
Design
of
simple
members
and
frames.
5. DesignofConcreteandMasonryStructures
Limit state design for bending, shear, axial compression and combined forces. Codal provisions for slabs, beams walls and
footings.WorkingstressmethodofdesignofR.C.members.
Principles of prestressed concrete design, materials, methods of prestressing, losses. Designs of simple members and
determinatestructures.Introductionofprestressingofindeterminatestructures.
DesignofbrickmasonryasperI.S.Codes.
6. ConstructionPractice,PlanningandManagement
ConcretingEquipment:
WeightBatcher,mixervibrator,batchingplant,concretepump.
Cranes,hoists,liftingequipment.EarthworkEquipment:
7/24/2019 English_Notice_ESE_2016 (1).pdf
16/24
16
Powershovel,hoe,dozer,dumper,trailersandtractor,rollers,sheepfootrollerspumps.
Construction,PlanningandManagement:
Bar chart, linked bar chart, workbreak down structures. Activityonarrow diagrams; Critical path, probabilistic activity
durations.Eventbasednetworks,PERTnetwork;Timecoststudy,crashing;resourceallocation.
PAPERII
1.(a)FluidMechanics,OpenChannel,Flow,PipeFlow
Fluid Properties, Perssure, Thrust, Buoyancy; Flow kinematics; Integration Flow equations; Flow measurement; Relative
Motion,Momentofmomentum;Viscosity,Boundarylayerandcontrol.Drag,Lift:DimentionalAnalysis.ModellingCavitation;
Flow Oscillations; Momentum and Energy principles in open channel flow. Flow controls. Hydraulicjump. Flow section and
properties; Normal flow. Gradually varied flow: Surges, Flow development and losses in pipe flows, Measurement, Siphons,
SurgesandWaterhammer.DeliveryofPower,Pipenetworks.
(b)HydraulicMachinesandHydropower
Centrifugalpumps,types,performanceparameters,scalingpumps inparallel.Reciprocatingpumps,airvessels,performance
parameters. Hydraulic ram. Hydraulic turbines types, performance parameters/controls, choice, power houses, classification
andlayout,storage,pondage,controlofsupply.
2.(a)Hydrology
Hydrologicalcycle,precipitationandrelateddataanalysis,PMPunitandsynthetichydrographs;Evaporationandtranspiration;
Floodsandtheirmanagement,PMF;Streamsandtheirgauging:Rivermorphology;Routingoffloods;CapacityofReservoirs.
(b)WaterResourcesEngineering
Water resources of the globe; Multipurpose uses of Water: SoilPlantWater relationship, irrigation systems, water demand
assessment; Storages and their yields; Ground water yield and well hydraulics; Waterlogging, drainage design; Irrigation
revenue; Design of rigid boundary canals, Laceys and Tractive force concepts in canal design, lining of canals; Sediment
transport in canals; Nonoverflow and overflow sections of gravity dams and their design. Energy dissipators and tailwater
rating;Design
of
headworks
distribution
works,
falls,
cross
drainage
works,
outlets;
River
raining.
ENVIRONMENTALENGINEERING
3.(a)WaterSupplyEngineering
SourcesofSupply,yields,designofintakesandconductors;Estimationofdemand;Waterqualitystandards.ControlofWater
bornediseases;Primaryandsecondarytreatmentdetailingandmaintenanceoftreatmentunits;Conveyanceanddistribution
systemsoftreatedwater,leakagesandcontrol;Ruralwatersupply;Institutionalandindustrialwatersupply.
(b)WasteWaterEngineering
Urban rain water disposal : Systems of sewage collection and disposal; Design of sewers and sewerage systems; pumping.
Characteristicsofsewageanditstreatment.Disposalofproductsofsewagetreatment,streamflowrejuvenation;Institutional
andindustrialsewagemanagement;PlumbingSystems;Ruralandsemiurbansanitation.
(c)SolidWasteManagement
Source,classification,collectionanddisposal;DesignandManagementofLandfills.
(d)AirandNoisePollutionandEcology
Sourcesand
effects
of
air
pollution,
monitoring
of
air
pollution;
Noise
pollution
and
Standards;
Ecological
chain
and
balance.
Environmentalassessment.
4.(a)SoilMechanics
Properties of soils, classification and interrelationship. Compaction behaviour, methods of compaction and their choice;
Permeability and seepage, flownets. Inverted filters; Compressibility and consolidation; Shearing resistance. Stresses and
failure;Soiltesting inlaboratoryandinsitu;Stresspathandapplications;Earthpressure,theories.Stressdistributioninsoils;
Soilexploration,samplers,loadtestspenetrationtests.
(b)FoundationEngineering
Typesoffoundations.Selectioncriteria,bearingcapacity,settlement,laboratoryandfieldtests;Typesofpilesandtheirdesign
andlayout.Foundationsonexpansivesoils,swellinganditspreventionfoundationonswellingsoils.
5.(a)Surveying
Classification of surveys, scales accuracy; Measurement of distancesdirect and indirect methods; optical and electronic
devices;Measurementofdirections,prismaticcompass,localattraction;Theodolitiestypes;MeasurementofelevationsSpirit
and
trigonometric
levelling.
Relief
representation
Contours;
Digital
Monitoring
Organisation
elevation
modelling
concept;
Establishment of control by traingulation and traversingmeasurements and adjustment of observations computation of
coordinates; Field astoronomy. Concept of global positioning system; Map preparation by plane tabling and by
photogrammetry.Remotesensingconcepts,mapsubstitutes.
(b) TransportationEngineering
Planningofhighwaysystems,alignmentandgeometricdesignhorizontalandverticalcurves,gradeseparation;Materialsand
construction methods for different surfaces and maintenance; Principles of pavement design; Drainage, Traffic Surveys;
Intersection,Signalling;Masstransitsystem,accessibility,networking.
Tunnelling,alignment,methodsofconstruction,disposalofmuck,drainagelightingandventilation,trafficcontrol,emergency
management.
Planningof railway systems, terminology and designs relating to gauge, track, controls transits, rolling stock, tractive power
7/24/2019 English_Notice_ESE_2016 (1).pdf
17/24
17
andtrackmodernisation;Maintenance,Appurtenantworks,Containnerisation.
Harbourslayouts,shipping lanes,anchoring, location identification;Literaltransportwitherosionanddeposition;Sounding
methods;Dryandwetdocks,componentsandoperations;Tidaldataandanalysis.
Airportslayout and orientation; Runway and Taxiway; design and drainage management; Zoning laws; Visual aids and air
trafficcontrol;helipads,hangers,serviceequipment.
MECHANICALENGINEERING(Forbothobjectiveandconventionaltypepapers)
PAPERI
1. Thermodynamics,CyclesandICEngines,Basicconcepts.OpenandClosedsystems.Heatandwork,Zerothe,Firstand
SecondLaw,ApplicationtononflowandFlowprocesses.Entropy,Availability,IrreversibilityandTDSrelations.Clapeyronand
real gas equations, Properties of ideal gases and vapours. Standard vapour. Gas power and Refrigeration cycles. Two stage
compressor. C. I. and S. I. Engines. Preignition, Detonation and Dieselknock, Fuel injection and Carburation. Supercharging
Tubroprop and Rocket engines. Engine Cooling. Emission and Control, Fuel gas analysis. Measurement of Calorific values.
Conventional andNuclearfuels.ElementsofNuclearpowerproduction.
2. HeatTransferandRefrigerationandAirconditioningModesofheattransfer.Onedimensionalsteadyandunsteady
condition.CompositeslabandEquivalentResistance.Heatdissipationfromextendedsurfaces.Heatexchangers.Overallheat
transfercoefficient.EmpiricalcorrelationsforheattransferinlaminarandturbulentflowsandforfreeandforcedConvection.
Thermal boundary layer over a flat plate. Fundamentals of diffusive and convective mass transfer, Block, body and basic
concepts in Radiation. Enclosure theory. Shape factor. Net work analysis. Heat pump and Refrigeration cycles and systems.
Refrigerants. Condensers. Evaporators and expansion devices. Psychrometry, Charts and application to airconditioning.
Sensible heating and cooling. Effective temperature, Comfort indices. Load calculations. Solar refrigeration. Controls, Duct
design.
3. FluidMechanics
Properties and classification of fluids, Manometry.Forces on immersed surfaces. Center ofpressure. Buoyancy, Elements of
stabilityof
floating
bodies.
Kinematics
and
Dynamics,
irrotational
and
incompressible,
inviseid
flow,
velocity
potential,
Pressure
field and Forces on immersedbodies Berroullis equations. Fully developed flow through pipes. Pressure drop calculations.
MeasurementofflowrateandPressure,drop.Elementsofboundary layertheory.Integralapproach.Laminarandturbulent
flows. Separations, Flow over weirs and notches. Open channel flows. Hydraulicjump. Dimensionless numbers Dimensional
analysis.Similitudeandmodelling.Onedimensionalisentronicflow.Normalshockwave.Flowthroughconvergentdivergent
ducts.Obliqueshockwave,RavleighandFannolines.
4.FluidMachineryandStreamGenerators
Performance,OperationandcontrolofhydraulicPumpandimpulseandreactionTurbines.SpecificspeedClassification.Energy
transfer. Coupling Power, transmission. Steam generators. Firetube and watertube boilers. Flow of steam through nozzles
and difusers, Wetness and condensation. Various types of steam and gas turbines Velocity diagrams. Partial admission
Reciprocating,CentrifugalandaxialflowCompressors,Multistagecompression,roleofMachNumber,Reheat,Regeneration,
Efficiency.Governace.
PAPERII
5.
Theoryof
Machines
Kinematicanddynamicanalysisofplannermechanisms.Cams.Gearsandgeartrains.Flywheels,Governors,Balancingofrigid
rotorandfieldbalancing.Balancingofsingleandmulticylinderengines.Linearvibrationanalysisofmechanicalsystems.Critical
speedsandwhirlingofshafts.AutomaticControls.
6. MachineDesign
DesignofJoints:cotters,keys,spines,weldedjoints,threadedfasteners,jointsformedbyinterferencefits.
Designoffrictiondrives:couplingsandclutches,beltandchaindrives,powerscrews.
DesignofPowertransmissionsystems:gearsandgeardrives,shaftandaxle,wireropes.
Designofbearings,Hydrodynamicbearingsandrollingelementbearings.
7. StrengthofMaterials
Stressandstrain intwodimensions.Principalstressesandstrains,Mohrsconstruction, linearelasticmaterials, isotropyand
anisotropy, stressstrain relations, uniaxial loading, thermal stresses. Beams: Bending moment and shear force diagram,
bendingstressesanddeflectionofbeam.Shearstressdistribution.Torsionofshafts,helicalsprings.Combinedstresses,thick
and
thin
walled
pressure
vessels.
Struts
and
Columns.
Strain
energy
concepts
and
theories
of
failure.
8.
EngineeringMaterials
Basicconceptsonstructureofsolids.Crystallinematerials,Deffectsincrystallinematerials.Alloysandbinaryphasediagrams,
structure and properties of common engineering materials. Heat treatment of steels. Plastics, Ceramics and composite
materials.Commonapplicationsofvariousmaterials.
9. ProductionEngineering
Metal Forming : Basic Principles of Forming, drawing and extrusion; High energy rate forming; Powder metallurgy. Metal
Casting:Diecasting,investmentcasting,ShellMoulding,CentrifugalCasting,GatingandRiserdesign;meltingfurnaces.
FabricationProcesses:PrinciplesofGas,Arc.ShieldedareWelding;Advanced.WeldingProcesses;weldability;Metallurgyof
Welding.
MetalCutting:Turning,MethodsofScrewProduction.Drilling,Boring.Milling,GearManufacturing.Productionofflatsurfaces
7/24/2019 English_Notice_ESE_2016 (1).pdf
18/24
18
GrindingandFinishingProcesses.ComputerControlledManufacturingSystemsCNC,DNC,FMS,AutomationandRobotics.
CuttingToolMaterials,ToolGeometryMechanismofToolWear,ToolLifeandMachinability; Measurementofcuttingforces.
EconomicsofMachining.Unconventional Machining.Processes,JigsandFixtures.
FitsandTolerances.Measurementofsurfacetexture.Comparators,AlignmenttestsandreconditioningofMachineTools.
10. IndustrialEngineering
Production, Planning and Control : Forecasting Moving average exponential smoothing. Operations scheduling; assembly
linebalancingProductdevelopment. Breakevenanalysis,capacityplanning,PERTandCPM.
ControlOperations:InventoryControlABCanalysisEOOmodel.MaterialsrequirementplanningJob.design.Jobstandards.
Workmeasurement. QualitymanagementQualityanalysisandcontrol.
OperationsResearch:LinearprogrammingGraphicalandSimplexmethods.Transportationandassignmentmodels.Single
serverqueuingmodel.
ValueEngineering:Valueanalysisforcost/value.
11. ElementsofComputation
Computer Organisation, Flowcharting. Features ofCommonComputerLanguagesFORTRAN, d Base III.Lotus 123,C and
elementaryprogramming.
ELECTRICALENGINEERING(forbothobjectiveandconventional typepapers)
PAPERI
1. KMTheory
Electricandmagneticfields.GausssLawandAwpcrisLaw,Fieldsindielectrics,conductorsandmagneticmaterials.Maxwells
equations. Timevaryingfields.PlaneWavepropagationindielectricandconductingmedia.Transmissionlines.
2.
ElectricalMaterials
Band Theory. Conductors, Semiconductors and Insulators. SuperConductivity. Insulators for electrical and electronic
applications. Magnetic materials. Ferro and ferimagnetism. Ceramics, properties and applications Hall effect and its
applications.Special
semiconductors.
3. ElectricalCircuits
Circuit elements. Kirchoffs LawsMesh and nodal analysis. Network theorems and applications. Natural response and forced
response.Transientresponseandsteadystatresponseforarbitraryinputs.Propertiesofnetworksintermsofpolesandzeros.
Transferfunction.Resonantcircuits.ThreephasecircuitsTwoportnetwork.Elementsoftwoelementnetworksysthesis.
4. Measurements andInstrumentation
UnitsandStandards,Erroranalysis.Measurementofcurrent.VoltagePower,Powerfactorandenergy.Indicatinginstruments.
Measurementofresistance inductance.Capacitanceandfrequency.BridgeMeasurements.Electronicmeasuring instrument,
digitalvoltmeterandfrequencycounters.Transducersandtheirapplications tothemeasurementofnonelectricalquantities
like temperature, pressure, flowrate displacement, acceleration, noise level etc. Data acquisition systems. A/D and D/A
Converters.
5. ControlSystems
Mathematical modelling of physical systems. Block diagrams and signal flow graphs and their reduction. Time domain and
frequencydomain
analysis
of
linear
dynamical
system.
Errors
for
different
types
of
inputs
and
stability
criteria
for
feedback
systems. Stability analysis using RouthHurwitz array, Nyquist plot and Bode plot. Root locus and Nicols chart and the
estimation of gain and phase margin. Basic concepts of compensator design. State variable matrix and its use in system
modellinganddesignSampleddatasystemandperformanceofsuchasystemwiththesamplesintheerrorchannel.Stability
of sampled data system. Elements of nonlinear control analysis. Control system component, electromechanical hydraulic
pneumaticcomponents.
PAPERII
1.ElectricalMachinesandpowertransformers
Magnetic Circuits. Analysis and Design of Power transformers. Construction and testing. Equivalent circuits, losses and
efficiencyRegulation.Autotransformer.3phasetransformer.Paralleloperation.
Basic concepts in rotating machines. EMF, torque, basic machine types. Construction and operation, leakage, losses and
efficiency.
D.C.MachinesConstruction.Excitationmethods,Circuitmodels.Armaturereactionandcommunication. Characteristicsand
performance
analysis.
Generators
and
motors.
Starting
and
speed
control.
Testing
Losses
and
efficiency.
Synchronous Machines.Construction Circuit model. Operating characteristics and performance analysis. Synchronous
reactance.Efficiency.Voltageregulation.Salientpolemachine.Paralleloperation.Hunting.Shortcircuittransients.
Induction Machines Construction.Principle of operation. Rotating fields. Characteristics and performance analysis.
Determinationofcircuitmodel.Circlediagram.Startingandspeedcontrol.
FractionalKWmotors.Singlephasesynchronousandinductionmotors.
2.PowerSystems
TypesofPowerStationHydro,ThermalandNuclearStations.Pumpedstorageplants.Economicsandoperatingfactors.
Power transmission lines. Modelling and performance characteristics. Voltage control. Load flow studies. Optimal power
7/24/2019 English_Notice_ESE_2016 (1).pdf
19/24
19
systemoperation.Loadfrequencycontrol.Symmetricalshortcircuitanalysis.ZBusformulationSymmetricalComponents.Per
unitrepresentation.Faultanalysis.Transientandsteadystatestabilityofpowersystems.Equalareacriterion.
PowersystemTransients.PowersystemProtectionCircuitbreakersRelays.HVDCtransmission.
3.AnalogandDigitalElectronicsandCircuits
Semiconductor device physics, PNjunctions and transistors, circuits Models and parameters, FET Zener tunnel, Schottky,
photo diodes and their applications, rectifier circuits voltage regulators and multipliers, switching behaviour diodes and
transistors.Smallsignalamplifiersbiasingcircuits,frequencyresponseandimprovement,multistageamplifiersandfeedback
amplifiers,D.C.amplifiers.Oscillators,Largesignalamplifiers,couplingmethods,pushpullamplifiers,operational amplifiers,
wave, shaping circuits. Multivibrators and flipflops and their applications. Digital logic gate families, universalgates
combinational circuitsforarithmeticandlogicoperationsequentiallogiccircuits.CountersRegisters.RAMandROMs.
4.Microprocessors
Microprocessor architecture.Instruction setandsimpleassembly language programming. Interfacing formemory and I/O.ApplicationsofMicroprocessorsinpowersystem.
5.CommunicationSystems
Types of modulation; AM, FM and PM. Demodulators. Noise and bandwidth consideration. Digital communication systems.
Pulse code modulation and demodulation. Elements of sound and vision broadcasting Carrier communication. Frequency
divisionandtimedivisionmultiplexing.Telemetrysysteminpowerengineering.
6.PowerElectronics
Power Semiconductor devices, Thyristor, Power transistor, GTOs and MOSFETs. Characteristics and operation. AC to DC
Converters.1phaseand3phaseDCtoDCConverters.
ACregulators.Thyristorcontrolledreactors,switchedcapacitynetworks.
Inverters :Singlephase and3phasePulse widthmodulation. Sinusoidal modulation with uniform sampling. Switched mode
powersupply.
ELECTRONICSANDTELECOMMUNICATIONENGINEERING(Forbothobjectiveandconventional typepapers)
PAPERI
1. Materialsandcomponents
Structure and properties of Electrical Engineering materials Conductors, Semiconductors and Insulators, Magnetic,
Ferroelectric,piezoelectricCeramic,OpticalandSuperconductingmaterials.PassivecomponentsandcharacteristicsResistors,
CapacitorsandInductors:Ferrites,Quartzcrystal.Ceramicresonators,Electromagneticandelectromechanicalcomponents.
2. PhysicalElectronics,ElectronDevicesandICs
Electronsandholesinsemiconductors.CarrierStatistics,Mechanismofcurrentflowinasemiconductor,Halleffect.Junction
theory;Differenttypesofdiodesandtheircharacteristics;BipolarJunctiontransistor;Fieldeffecttransistors;Powerswitching
deviceslikeSCRs.CTOs,powerMOSFETs;BasicsofICsbipolar,MOSandCMOStypes;BasicsofOptoElectronics.
3. SignalsandSystems
Classification of signals and systems; System modelling in terms of differential and difference equations; State variable
representation; Fourier series; Fourier transforms and their application to system analysis; Laplace transforms and their
application to system analysis; Convolution and superposition integrals and their applications; Ztransforms and their
applications
to
the
analysis
and
characterisation
of
discrete
time
systems;
Random
signals
and
probability.
Correlationfunctions;Spectraldensity;Responseoflinearsystemtorandominputs.
4. NetworkTheory
Network analysis techniques: Network theorems, transient response steady state sipusoidal response; Network graphs and
their applications in network analysis; Tellegens theorem. Two port networks : Z, Y, h and transmission parameters.
Combinationoftwoportsanalysisofcommontwoports.Networkfunctions;partsofnetworkfunctions;obtaininganetwork
function from a given part. Transmission criterion : dalcy and rise time. Elmorcs and other definition effect of cascading
Elementsofnetworksynthesis.
5. ElectromagneticTheory
Analysis of electrostatic and magnetostatic fields; Laplaces and Potsons equations; Boundary value problems and their
solutions;Maxwellsequations:applicationtowavepropagationinboundedandunboundedmedia;Transmissionlines:basic
theory, standing wave, matching applications microstrip lines; basics of waveguides and resonators; Elements of antenna
theory.
6.
Electronic
Measurement
and
Instrumentation
Basicconceptsstandardsanderroranalysis;Measurementsofbasicelectricalquantitiesandparameters;Electronicmeasuring
instrumentsandtheirprinciplesofworking,analoganddigital,comparisoncharacteristics,applicationsTransducers;Electronic
measurementsofnonelectricalquantitiesliketemperature,pressure,humidityetc.Basicsoftelemetryforindustrialuse.
PAPERII
1.AnalogElectronicCircuits
Transistor biasing and stabilization small signal analysis. Power amplifiers Frequency response. Wide banding techniques
Feedback amplifiers Tuned amplifier? Oscillators, Rectifiers and power; supplies Op Amp PLL other linear integrated circuits
andapplicationsPulseshapingcircuitsandwaveformgenerator.
2.DigitalElectronicCircuits
7/24/2019 English_Notice_ESE_2016 (1).pdf
20/24
20
Transistor as a switching element; Boolean algebra simplification of Boolean functions, Karnaugh man and applications IC
Logic gates and their characteristics : IC logic families : DTL, TTL, ECL, NMOS PMOS and CMOS gates, and their comparison
Combinationallogiccircuits;HalfadderFulladder.Digitalcompartor.Multiplexer.Demultiplexer;ROMandtheirapplications,
Flipflops,RS,J.K.,DandTnpnops;Differenttypesofcountersandresisters;Waveformgenerators.A/DandD/Aconveners.
Semiconductormemories.
3.ControlSystems
Transientandsteadystateresponseofcontrolsystems,Effectoffeedbackonstabilityandsensitivity;Rootlocustechniques;
FrequencyresponseanalysisConceptsofgainandphasemargins;constantMandConsta.NNicholssChart;Approximationof
transientresponsefromConstantNnicholsChart;Approximationoftransientresponsefromclosedloopfrequencyresponse;
DesignofControlsystemsCompensators;Industrialcontrollers.
4.CommunicationSystems
Basic information theory. Modulation and detection in analogue and digital systems; Sampling and data reconstruction
Quantization&Coding;Timedivisionandfrequencydivisionmultiplexing,Equalisation;OpticalCommunication infreespace
andfibreoptic;PropagationofsignalsatHF,VHP,UHFandmicrowavefrequency;SatelliteCommunication.
5.MicrowaveEngineering
Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other Microwave
Components and Circuits Microstrip circuits, Microwave Antennas, Microwave Measurements, Masers Lasers; Microwave
propagation. MicrowaveCommunicationsystemsterrestrialandSatellitebased.
6.ComputerEngineering
NumberSystems;Datarepresentation;Programming;ElementsofahighlevelprogramminglanguagePASCAL/C.Useofbasic
data structures; Fundamentals of computer architecture; Processor design; Control unit design; Memory organisation. I/o
System Organisation, Microprocessors : Architecture and instruction set of microprocessors 8085 and 8086. Assembly
languageprogramming.Microprocessorbasedsystemdesign:typicalexamples.Personalcomputersandtheirtypicaluses.
AppendixII
INSTRUCTIONS TOTHECANDIDATESFORFILLINGONLINEAPPLICATIONS
Candidates must apply Online by using the Website www.upsconline.nic.in Salient Features of the system of Online
ApplicationFormaregivenhereunder:
DetailedinstructionsforfillingupOnlineApplicationsareavailableontheabovementionedwebsite.
Candidates will be required to complete the OnlineApplication Form containingtwostagesviz.PartIandPartIIasperthe
instructionsavailableintheabovementionedsitethroughdropdownmenu.
ThecandidatesarerequiredtopayafeeofRs.200/ (RupeesTwoHundred Only) [excepting Female/SC/ST/PH candidates
who areexemptedfrompaymentoffee]eitherbyremittingthemoneyinanybranchofSBIbycash,orbyusingnetbanking
facility of State Bank of India/State Bank of Bikaner & Jaipur/State Bank of Hyderabad/ State Bank of Mysore/State Bank of
Patiala/StateBankofTravancoreorbyusinganyVisa/MasterCredit/DebitCard.
Before start filling up OnlineApplication, a candidate must havehis/herphotograph andsignaturedulyscanned inthe .jpg
formatinsuchamannerthateachfileshouldnotexceed40KBeachandmustnotbelessthan3KBinsizeforthephotograph
and1KBforthesignature.
The Online applications(Part I and II) can be filled from 27th
February, 2016 to 25th
March, 2016 till 11.59 p.m.,
afterwhichlinkwillbedisabled.
Applicants should avoid submitting multiple applications. However, if due to any unavoidable circumstances any
applicantsubmitsmultipleapplicationsthenhemustensurethattheapplications withhigherRIDiscompleteinallrespects.
Incaseofmultipleapplications,theapplicationswithhigherRIDshallbeentertainedbytheCommissionandfeepaid
againstoneRIDshallnotbeadjustedagainstanyotherRID.
The applicants must ensure that while filling their application form,theyareprovidingtheirvalidandactiveemail
IDsastheCommissionmayuseelectronicmodeofcommunication whilecontactingthem.TheApplicants are advised to
check their emails atregular intervalsandensurethattheemailaddressendingwith@nic.inaredirectedtotheirinbox
folderandnottotheSPAMfolderoranyotherfolder.Candidates are stronglyadvised to apply Online well in timewithout
waitingfo