Engineering the Geological Chaos of Franciscan and Other Bimrocks Edmund Medley, PhD, PE, CEG, F.ASCE Session 12: Melanges, Mixed Materials and Chaotic.

Engineering the Geological Chaos of Franciscan and Other Bimrocks

Edmund Medley, PhD, PE, CEG, F.ASCE

Session 12: Melanges, Mixed Materials and Chaotic Rocks

ARMA Conference 2008

San Francisco, CA

Tuesday, July 1 2008

This version of the presentation is provided on condition be it be used only for individual and non-commercial purposes

1E. Medley, 2008 www.bimrocks.geoengineer.org

Franciscan melanges

Franciscan Complex melange, Mendocino, California

E. Medley, 2008 www.bimrocks.geoengineer.org 2

Melanges (mélanges) are mixtures of hard blocks in weaker matrix.

In the Franciscan blocks are found at all scales of engineering interest.

E. Medley, 2008 www.bimrocks.geoengineer.org 3

• Block size distributions are scale independent and fractal (power law)

• range in size between mountains and sand- blocks will always be found:

• characterization must take blocks into account

• Lc - characteristic dimension, scales rockmass

• Lc - slope height, tunnel diameter, largest local block, etc.

• What is block? What matrix?

– smallest blocks: ≥0.05Lc

– largest blocks: ≤0.75Lc

blocks in Franciscan melanges

E. Medley, 2008 www.bimrocks.geoengineer.org 4

fundamental fabric: strong blocks, weak matrix

Blocks and sheared matrix within San Andreas fault zone, northern California

soil

Corestones

Decomposed granite, Hwy 50, Tahoe area, California

bimrocks• bimrocks: short for block-in-matrix rock: melanges, fault rocks,

weathered rocks, etc.

• geologically neutral term, no geological connotation.

“mixtures of rocks composed of geotechnically significant blocks within a bonded matrix of finer texture”

• “Geotechnically significant blocks ”: there are enough blocks to make a difference to mechanical properties of the rock mass

5E. Medley, 2008 www.bimrocks.geoengineer.org

the major problem with bimrocks: WYTYSINWYG*

Blocks, inclusions, lenses, etc

Matrix

Matrix

Matrix

Matrix

scale: 1:??????

6E. Medley, 2008 www.bimrocks.geoengineer.org

*what you think you see is not what you get

the seduction of straight lines..

E. Medley, 2008 www.bimrocks.geoengineer.org 7

Wrong!!

Right!

After Wakabayashi and Medley, 2004

E. Medley, 2008 www.bimrocks.geoengineer.org 8

the misery of mischaracterization

BH

BH

BH

outcrop“shallow landslide in soil

over bedrock”

15 m excavation looking for the “failure plane”

E. Medley, 2008 www.bimrocks.geoengineer.org 9

a nice and simple engineering relationship

-5

0

5

10

15

20

25

30

0 20 40 60 80 100

Volumetric Block Proportion (%)

Incr

.. F

ric

tio

n A

ng

le, d

egre

es Scott Dam melange

Physical modelsIrfan and Tang, 1993

conservative trend (Lindquist 1994a)

Scott Dam melange

Strength of bimrock increases with volumetric block proportion

E. Medley, 2008 www.bimrocks.geoengineer.org 10

Linear block proportion

total length of block/boring intersections divided by total lengths of boring

How accurate are linear block proportions relative to actual volumetric block proportion??

estimating block proportion from drilling

E. Medley, 2008 www.bimrocks.geoengineer.org 11

how wrong can we be in assuming

Linear = Volumetric Proportions?Actual volumetric proportion is 32%

beware uncertainty in estimates of block proportion!!!

conclusions• Franciscan melanges share many characteristics with other rock/soil

mixtures: hence “bimrocks”• Bimrocks are disorderly and often chaotic• We have to work with bimrocks• We can characterize chaos: simple methods are available:

http://bimrocks.geoengineer.org

or: type “Ed Medley” in Google Search

E. Medley, 2008 www.bimrocks.geoengineer.org 12