Engineering Services - A.H. Lundberg

A.H. L U N D B ER G S Y S T E M S L I M I T E DEngineered Process Solutions

Suite 300, 5118 Joyce Street, Vancouver, BC Canada V5R 4H1 � PH: 604-629-5599 � FX: 604-629-5199 � WEB: www.ahlundberg.com

Engineering Services

TABLE OF CONTENTS

Suite 300, 5118 Joyce Street, Vancouver, BC V5R 4H1 — PH: 604-629-5599 — FX: 604-629-5199 — www.ahlundberg.com

EN

GIN

EE

RIN

G S

ER

VIC

ES*Table of Contents

* Introduction

* Engineering Services

* Expertise OverviewEnvironmental SystemsEvaporation TechnologiesEnergy Optimization

* Key Personnel

* Design Examples

* Project Photo Examples

* Markets Served

* Testimonials

* Locations

INTRODUCTION

. . . .The product is greater than the sum of its parts.

Excellence: time-tested and proven.

From modest beginnings in 1954, A.H. Lundberg Systems has

evolved into a leading designer of environmental systems,

energy optimization, chemical handling, and process

engineering services to power, resource, and processing

industries.

We are a Canadian company with corporate offices located in Vancouver, British Columbia, Canada. Through our Vancouver office and our network of agents and representatives, we provide solutions to industrial

enterprises worldwide. Our commitment to these

industries over the years and the experience of our staff

give us the expertise that our clients have come to rely

upon. Continuous involvement in limited areas permit us to

offer specialized services utilizing the latest state-of-the-art

technology.

Working with A.H. Lundberg Systems means working with a

company that takes care of every aspect of a project. We

understand how integrated systems can interact and how they

may affect one another. Building upon years of experience, we

continually provide new solutions to plant needs, expanding on

what has been done before.

A.H. Lundberg Systems’ capabilities do not stop with process

knowledge. We have the resources to perform every element

of an EPC project, tailoring our scope and project team to

meet the specific needs of the client, looking carefully at every

aspect to find the best fit and develop the most cost effective

solution.

The ability to adjust our scope to meet project needs allows our

clients to efficiently utilize existing plant resources and

expertise in conjunction with ours.

Our innovative ways include not only what we do, but also how

we do it. Our knowledge gives us the flexibility to adjust the

system design, or the implementation of the project, to provide

the customized solution required.

The proper scoping of a project, the ability to tie multiple

systems together that are diverse, yet interrelated, and building

the proper project team are all ingredients assuring overall

success. We are committed to the goal of providing a

technically advanced, high quality, economical, safe and

reliable installation.

Our goals are to meet your needs for technically advanced, high

quality, cost effective, safe and reliable system design and

engineering services. Our customers have come to understand

and appreciate these goals and our commitment to the industries

we serve. We have built and maintained relationships on

integrity and trust.

With A.H. Lundberg Systems you will experience the same

project success whether you need to implement a single system

component or an EPC solution involving multiple system

integration.

ENGINEERING SERVICES

Engineering Studies/Audits

A.H. Lundberg Systems is often requested to perform an audit

on an existing plant system for a number of purposes including

increasing system capacity, system safety, system efficiency,

improve stability of ease of operation, trouble shooting and

interfacing one system with another or future system. Each

audit is tailored to the specific need of the client and may

comprise a number of the areas listed above.

Our specialty is the process knowledge of the technology we

provide. We utilize this technology to benefit a plant in the

review of individual systems including all types of waste gas

handling systems, condensate/sour water stripping systems,

evaporator systems, and heat transfer systems.

Process Engineering

Process engineering provided by A.H. Lundberg Systems

typically includes process flow diagrams, piping and

instrument diagrams, customer vessel drawings, pump

specifications, instrument specifications, typical general

arrangements, assembly drawings (if appropriate) and

operating and maintenance manuals. Drawings such as the

piping and instrumentation diagrams and instrument

specifications can be done on plant title blocks using standard

symbolism and specifications.

Operating and maintenance manuals are indevidualized for the

given process and plant requirements. Detailed information on

all supplied equipment is included, in addition to a detailed

description of all instrumentation.

Project Engineering

A.H. Lundberg Systems can provide detailed engineering

services for the installation of the project so that installation

may be done by the plant using internal personnel or local

contractors. A.H. Lundberg Systems has the capability to do the

complete detailed engineering in house using our own engineers

knowledgeable for the process to be installed.

The detailed engineering services that A.H. Lundberg Systems

can provide include civil and structural design, mechanical

design, electrical and instrumentation engineering, demolition

detailing and piping design. We also can provide an erection

advisor to oversee the process installation of the system.

Full Project Turnkey

The project may be as small as the replacement or retube of a

heat exchanger up to a complete multiple effect evaporator

system. Every major system that we provide is suitable for

installation on a turnkey basis.

A.H. Lundberg Systems will utilize existing plant specifications

where applicable and where absent, we generate new

specifications for plant approval. Further, the project will utilize

plant preferred equipment and suppliers as well as utilizing

local vendors that provide support to the plant.

A.H. Lundberg Systems has the capability to perform all of the

major engineering disciplines in house including process

engineering, mechanical design, structural design, electrical

engineering and piping design.

ENVIRONMENTAL

. . . . Safety. Reliability. Efficiency.

Environmental Management Systems . . . .

Whether there are new local regulations, stricternational requirements, or more demanding in housegood neighbor policies, the end requirement is tosafely and efficiently maintain your goodenvironmental citizenship status.

Long after the project is complete, we continue toprovide you with access to the latest safety andcompliance technology. This commitment has madeA.H. Lundberg Systems a leading designer ofenvironmental systems for flue gas remediation,process waste gas handling, process condensatesegregation, and foul condensate stripping.

Environmental compliance is a never endingchallenge for industrial facilities throughout theworld. Addressing these ever changing regulationsis something at which A.H. Lundberg Systemsexcels.

We have been supplying safe and reliable solutionsfor decades. Our systems have exceeded allrequirements at every location. The emphasis is toprovide safe and reliable systems that areeconomically viable, allowing you to focus onmaking the overall plant operation profitable.

EVAPORATION

. . . . Economize. Improve. Modernize.

Evaporation Technologies . . . .

As a leading manufacturer of evaporation anddistillation systems worldwide, A.H. LundbergSystems is well qualified to provide modifications toexisting evaporator systems.

Some of the more common reasons for modifyingexisting evaporator systems include capacityincrease, economy increase, increase in run timebetween cleaning, reduction in liquor carry over withthe vapor, mechanical rebuild and condensatesegregation.

Reduction of fouling in the evaporator set is also acommon issue. We offer technologies such asproduct effect changes and flow augmentation toreduce scaling tendencies.

We are experts in the mechanical rebuild orreplacement of existing effects on an EPC basis.This includes the replacement of vapour heads,retubing of effects, removal and installation of newheater shells and replacement of bodies.

Quite often in the complete replacement of existingbodies, new features may be incorporated whichresult in improved condensate segregation andincreased capacity.

We offer the retrofit of our high efficiency mistelimination system to existing evaporators to reduceliquor carry-over in the vapour exhaust, allowing anincremental capacity increase to the evaporationsystem.

ENERGY OPTIMIZATION

. . . . Recover. Utilize. Optimize.

Energy Recovery and Reuse . . . .

The price of energy has always been a majorcomponent in a plant’s cost structure. Therefore, tooptimize the process designs to minimize the impactof energy use is crucial to the profitability of anenterprise.

Our knowledge and experience with interconnectedplant wide systems, blended with the proper amountof creativity, help us improve the profitability ofyour facility. All aspects are considered in thisprocess, including operability, capital costs,operating costs, maintenance and safety.

We evaluate each potential solution to determine thebest fit for your facility. We work with high or lowgrade heat recovery. If an installation cannot use thelow grade heat in its present form, we look toupgrade it to a higher level of energy or utilize it inan innovative way.

From audits that identify procedural changes in theplant’s operation to major process and equipmentmodifications, our team of experienced engineerscan help you to optimize your plant’s energy use.

KEY PERSONNEL

BRUCE DER, P.Eng., M.B.A., PresidentMr. Der has broad experience in process design and project management in various industries. He joinedLundberg in 1975 as a process engineer and became President and Principal in 1986.

He is continually involved in project strategy, direction, and management, specification, budgeting, and costcontrol of all projects undertaken. Skilled at financial statement analysis, cost estimating & analysis, budgeting,NPV and ROI analysis, cost-benefit analysis, bid specification and evaluation, technical & commercialnegotiating, purchasing and contract development. Registered as an Industrial Energy Manager with B.C. HydroPower Smart Industrial Alliance program specializing in heat recovery and energy optimization.

Areas of experience includes heat recovery, heat exchange & utilization, evaporation technologies, condensatesegregation, condensate stripping and distillation systems, waste gas collection, scrubbing, and incinerationsystems, mist elimination, ultra-filtration, reverse osmosis, chemical preparation, handling & recovery, corrosioncontrol, unit operations, general process engineering, and specialty equipment.

Professional associations and training includes graduation from University of BC, B.A.Sc., Chemical Engineeringin 1975,membership in the Association of Professional Engineers & Geoscientists of B.C. since 1978. Heacquired his MBA at th University of BC in 1983. Mr. Der is a member of the Pulp & Paper TechnicalAssociation of Canada and currently sits in the Steam-Power Committee of the association.

ALLAN JENSEN, P.Eng., PhD., Vice President -Technical 25 years experience with A.H. Lundberg. Senior chemical/process engineer with experience in waste heatrecovery, heat exchanger design and optimization, difficult fluid heat exchange, waste gas collection &incineration, condensate and component distillation, absorption, scrubbing, incinerators, chemical handling andpreparation, evaporation, crystallization, condensate segregation, decanting, de-aeration, oxidation, separation,reaction kinetics, and corrosion. A specialist at heat and material balances, process development, optimization,development of system options, equipment sizing and retrofitting, cost-benefit analysis, feasibility analysis, shortand long range planning, and technical report writing.

Professional associations and training includes graduation from the University of BC in 1989 as Bachelor ofApplied Science, Chemical Engineering. Mr. Jensen obtained his PhD in Chemical Engineering from theUniversity of British Columbia in 2007. Professional Associations include membership in the Association ofProfessional Engineers & Geoscientists of B.C.

BEN LIN, P.Eng., M.Eng., Vice President - ProductsMr. Lin joined Lundberg in 2002 as Products Manager. With over 27 years of engineering experience, Mr. Linis called upon frequently to do engineering studies and process system design in a wide variety of areas.Expertise includes business development, project management, specification, budgeting, and cost control,process strategy & design, development of system options, heat & material balances, detailed calculations, logic& control, equipment design, sizing, and retrofitting, line sizing, pressure drop calculations, engineering studies,audits, upgrades, modernizations, optimization, and troubleshooting.

Areas of experience includes heat recovery, heat exchange & utilization, evaporation technologies, condensatestripping, distillation technologies, waste gas collection, scrubbing, and incineration, incinerator design, chemicalpreparation, handling & recovery.

Professional associations and training includes graduation from University of BC, B.A.Sc., Chemical Engineering

KEY PERSONNEL

in 1987. Mr Lin acquired his Masters Degree in Pulp & Paper Engineering from the University of BC in 1988and is a member of the Association of Professional Engineers & Geoscientists of B.C.

TIM BINNEMA, A.Sc.T., Vice President - EngineeringMr. Tim Binnema has broad experience in industrial project management and design. He joined the companyin 1988 as a mechanical and piping designer and his current position is VP of Engineering.

Expertise includes project management, specification, budgeting, and cost control, process design, developmentof system options, calculations, process logic and control, piping and plant layout, corrosion engineering,equipment design, Mr. Binnema is actively involved in engineering studies, audits, upgrades, modernizations,optimization, and troubleshooting.

His areas of experience includes heat recovery systems, specialized heat exchange & utilization, evaporation &concentration technologies, condensate stripping, distillation technologies, evaporator condensate segregation& partitioning, turpentine recovery, handling, and incineration, waste gas collection, scrubbing, incinerationsystems, incinerator design, wet electrostatic precipitators.

Technical training includes graduation from the BC Institute of Technology in 1985 as a Mechanical EngineeringTechnologist. Mr. Binnema is registered as an Applied Science Technologist and Technician of B.C.

TOM TO, A.Sc.T, Manager of Electrical & InstrumentationMr. To joined the Company in 1989 as one of our Process Control Technologists. Tom is a graduate of the B.C.Institute of Technology in the Process Automation and Instrumentation disciplines. His experience has been inthe initial project design and layout, through commissioning and startup. His current position is Manager ofElectrical & Instrumentation.

Expertise includes process design, development of system options, calculations, process logic and control,process measurement and control, instrumentation design and commissioning, electrical design and layout (lowand medium voltage), PLC and hard wire interlock design, operating manuals and training, field assistance,commissioning and startup, AutoCAD administrator, computer programming.

Areas of experience includes heat recovery, heat exchange & utilization, evaporation technologies, distillationand condensate stripping, evaporator condensate segregation & partitioning, waste gas collection, scrubbing, andincineration, incinerator design, chemical preparation, handling & recovery, wet electrostatic precipitators.

Technical Training includes a Diploma of Technology from the BC Institute of Technology in 1989 in ProcessAutomation and Instrumentation, 1st and 2nd year sciences through the University of British Columbia. Professional Associations include membership in the Applied Science Technologists and Technicians of B.C.and membership in the Instrument Society of America (ISA).

KEY PERSONNEL

WING CHAN, Project ManagerMr. Wing Chan has broad experience in project management, equipment design, fabrication, quality control, andresource management. After 5 years employment as Chief Designer for a major fabrication facility in Vancouver,he joined AHL in 1973 as a senior equipment and piping designer. His current position is Project Manager.

Expertise includes detailed knowledge of pressure vessel design, heat exchangers & equipment design to ASMESection VIII, Div. 1; TEMA Standard; API-650; B31.3 Piping Codes, equipment & piping layout & design, AutoCAD computer drafting & programming, project management, cost estimating & analysis, resourcemanagement & scheduling, and quality assurance.

Areas of experience includes waste gas collection and incineration, condensate stripping and scrubbing,evaporation and heat recovery.

Technical training includes graduation from the University of Hong Kong, School of Architecture, GeneralAccounting in 1962. Further training includes Structural Steel Design, and Machine Design through theVancouver Vocational School in 1967, Mechanical Engineering, and Advanced Drafting at the British ColumbiaInstitute of Technology in 1968. Subsequent technical development courses have included ASME Section VIIIProgram, Pressure Vessel Codes, and ASME B31.3 Program, Piping Code.

RICK VANDERGRIENDT, P. Eng., Senior Process Engineer Senior chemical/process engineer with 32 years experience in waste heat recovery, waste gas collection andincineration, steam and condensate and boiler systems. Rick joined the Company in 2014 and is a specialist atheat and material balances, process development, optimization, development of system options, equipment sizingand retrofitting, HAZOP studies, commissioning and startups. Prior to joining the company, Rick was ChiefProcess Engineer at Nexterra Systems where he was instrumental in the successful development of a biomassgasification system.

STEVEN KLUITERS, M.Sc. Aerospace Engineering, B.Sc. Economics & Business, Project Manager / ProjectEngineer. 13 years experience in Industrial Process Systems. Well rounded background in process equipment and plantintegration design, together with extensive project management experience. A specialist at process equipmentdesign review, development of system options, equipment sizing and retrofitting, cost-benefit analysis, feasibilityanalysis, short and long range planning, and technical report writing

DESIGN

Plant Layouts

Process & InstrumentDiagrams

Piping Layouts

DESIGN

Process & InstrumentDiagrams

2D & 3D Modeling

3D Modeling

DESIGN

Control & AutomationDiagrams

Logic Diagrams

Control Valve Data Sheets

PROJECT PHOTOS

Multiple Effect Evaporation System Direct Contact Condenser Wet Electrostatic Precipitator

Pre-Evaporation & Stripper Waste Gas Incineration Distillation System

Steam Stripping with Integrated Reboiler Sulphur Dioxide Vaporization Module

TESTIMONIALS

LOCATIONS

Canada:A.H. Lundberg Systems Limited 5118 Joyce Street, Suite 300 Vancouver, B.C. V5R 4H1

Contact:

Phone: 604-629-5599

Fax: 604-629-5199

E-Mail: [email protected]

Representatives:

Atlantic Canada:Maynard Reece Engineering Equipment Ltd.60 Thornhill Drive, Unit 7Dartmouth, NS B3B 1S1

Contact: Les ReecePhone: 902-468-2994Fax: 902-468-2995E-Mail: [email protected]

Australia/New Zealand Representative:Paperlines P.O. Box 812Cambridge, New Zealand

Contact: Harry Mowbray Phone: 64-7-827-3426 Fax: 64-7-827-6728 E-Mail: [email protected]

China (Beijing) Representative Office:PSSC Inc.Rm 1208 Tower B, SOHO New Town,No 88 Jianguo Road, Chaoyang DistrictBeijing, 100022, China

Contact: Cherry ZhangPhone: 86-10-8580-0836, ext. 68E-Mail: [email protected]

China (Shanghai) Representative Office:Room 2107, Suite 3No. 101 Yiwen Road, Minghang DistrictShanghai, 200237, China

Contact: Tim WuPhone: 86.13321855912E-Mail: [email protected]