Engineering Reports

1

Engineering Reports Report organization Writing style Professional tone Figures and tables

2

Engineering Report Organization

1) Title / cover page2) abstract or executive summary3) front matter (TOC, LOA, LOF, ACK)4) introduction5) technical sections6) conclusions7) references 8) appendices

Items in red are pertinent for your design reports in this course.

3

Title Page

Title (unique, but not too long) Names Section and Team Number Name of class/instructor Term (Fall 2012) Date Auburn University

4

Executive Summary or Abstract

Abstract – typically 100-200 words summarize main conclusions of report In a longer engineering report, an abstract

or executive summary can be up to one page long but never longer.

Audience: your manager, so he/she can read it in 5 min. on the way to board meeting.

5

Front Matter

Table of contents Lists of figures, list of tables figures,

acronyms Nomenclature (symbols & abbreviations) Acknowledgements (for funding, editorial

help, encouragement, etc.) Usually use lowercase roman numerals for

page numbers

6

Introduction

Problem statement Background (history, relevant information) Summarize approach Outline remainder of report

7

Technical Sections

Choice of present design» discuss each tradeoff– six minimum as shown

on next slide.» What alternatives were considered?» Give data supporting your choice» Use Pugh charts–clearly indicate best choice» Explain choice in words

8

Lego Car Design Tradeoffs Output voltage

» Higher output voltage increases speed» Penalties apply above 10V

Power supply (batteries)» One 9V battery (light, but less than 10V)» Two 9V batteries (≥10V, but heavy)» Watch batteries (very light, but drain quickly)

Wheel size and gears» Torque vs. speed tradeoff

Drive strategy» Front / rear wheel drive – controllability vs. stability

Course path» Passing through all gates vs. missing gates (time penalty)» Pushing block vs. not pushing block (time penalty)

Body» Light vs. heavy – speed vs. ability to push block

9

Technical Sections

Include figures and tables near relevant body text.» Long lists or tables should be referred to an

appendix.» Figures & tables must have captions and be

referenced in the body text. Specifications/drawings/parts/cost

10

Technical Sections

Performance (Final Design Report Only)» Predicted» Actual» Explain any differences

11

Conclusions

What was accomplished & learned» technical information obtained» NOT information learned about life, school,

etc. (Keep it technical.)» Resist the urge to proclaim what a wonderful

class / teacher this was

12

Appendices

Use for material that few people would read in its entirety» long tables» long calculations» detailed specifications

13

Engineering Reports Report organization Writing style Professional tone Figures and tables

14

Writing Style Short paragraphs

» Introduce your point (Topic position)» Support your point» Drive your point home (Stress position)

Write like a journalist» Newspapers» Magazines

15

Writing Style

Use short sentences.» Poor style:

“In lab, we found that a bridge rectifier generated a slightly faster completion time than a half-wave rectifier, but, taking into consideration the penalty for use of extra parts, we decided to use a half-wave rectifier.”

16

Writing Style

» Better style:“In lab experiments, a bridge rectifier generated a

slightly faster completion time than a half-wave rectifier. A half-wave rectifier, however, actually yielded a faster time once the penalty for extra parts was considered.”

17

Paragraph Too Long

When the force of sound waves implode tiny bubbles within a liquid at room temperature, the surface of the bubble can reach temperatures at least 25,000 degrees Fahrenheit, more than twice as hot as the surface of the sun, scientists reported this month. The center of such a bubble may be even more astonishingly hot. The scientists, at the University of Illinois, did not speculate just how hot the bubble became, but said they had managed to create a state of matter called plasma inside the bubble. In it, some of the electrons have been stripped off the atoms. "This is the first definitive proof of the existence of a plasma" during this kind of bubble implosion,” said one of the scientists, Dr. Kenneth S. Suslick, a professor of chemistry at Illinois.

18

Short ParagraphsWhen the force of sound waves implode tiny bubbles within a liquid at room temperature, the surface of the bubble can reach temperatures at least 25,000 degrees Fahrenheit, more than twice as hot as the surface of the sun, scientists reported this month.

The center of such a bubble may be even more astonishingly hot.

The scientists, at the University of Illinois, did not speculate just how hot the bubble became, but said they had managed to create a state of matter called plasma inside the bubble. In it, some of the electrons have been stripped off the atoms.

"This is the first definitive proof of the existence of a plasma" during this kind of bubble implosion, said one of the scientists, Dr. Kenneth S. Suslick, a professor of chemistry at Illinois.

19

Formatting Tips

Bad Example

Try to use lists, bullets, and headers as much as you can. Text that runs together in long, drawn-out paragraphs can be hard to follow. It is also hard to see the main points. Furthermore, it makes it difficult to scan quickly for specific points of interest.

20

Exploit lists, bullets, and headers Paragraph format:

» can be hard to follow. » hard to see the main points. » difficult to scan for specific points of interest.

Formatting Tips -- Better Example

21

Engineering Reports Report organization Writing style Professional tone Figures and tables

22

Professional Tone

Don’t make vague assertions.

“We decided to use 12 gauge wire. The 12 gauge wire is efficient for its size. It will conduct enough electricity and not add too much weight to the car. It also offers

a low amount of resistance.”

23

Professional Tone

Less vague:

“We decided to use 12-gauge wire. As seen in Table 3, electrical resistance is proportional to wire gauge. Weight is inversely proportional to wire gauge. 12-

gauge wire provided the best tradeoff between weight and electrical resistance.”

24

Professional Tone

A report isn’t a diary or a blog.NO:“We tried a half-wave rectifier at first, but then

we put a capacitor in parallel with the circuit and found that the average speed increased.”

YES:“A capacitor in parallel with a half-wave

rectifier gave the highest average speed.”

25

The design project is to build a small vehicle from Legos parts powered by the output of a PC sound card. You will select a waveform to play through the sound card, which will then be amplified by an audio amplifier and delivered to the vehicle.

Separate left and right channels will be available so that steering can be accomplished through the balance control on the PC volume control user interface. Circuits will be designed to convert the audio signals to signals that drive the car motors. The goal is to build a vehicle that can complete a race course in the shortest time possible.

Professional Tone

The report should have a consistent, professional-looking format throughout.

26

Professional Tone No handwritten marks anywhere!* No hand-drawn figures, unless of

exceptionally high quality. Addressed as one professional to another,

not student to instructor. Avoid contractions (don’t, can’t, …).*Exceptions may apply.

27

Professional Tone Avoid expression of feelings. Just state

facts.NO: “We feel that an 18-gauge wire

provides the best tradeoff…”YES: “Our simulations showed that an

18-gauge wire provides the best tradeoff…”

28

Professional Tone

Support all assertions with data if it is available.

Types of data» Simulation results» Experimental measurements

29

Example

“A capacitor in parallel with a half-wave rectifier gave the highest average speed.”

30

Better

“Table 2 shows the average speed around a 10 m track for several rectifiers. A capacitor in parallel with a half-wave rectifier gave the highest average speed.”

31

Engineering Reports Report organization Writing style Professional tone Figures and tables

32

Figures and Tables Number each figure or table

» Figure 1, Figure 2, etc.» Table I, Table II, etc.

Give each figure/table a caption» Give basic information about the figure/table» Figure captions go below a figure» Table captions go above a table

33

Figures and Tables Refer to the figure/table in the text

» Do not make the reader find the figure/table on his/her own!

In the text:» Describe what the figure/table means or represents.» Describe how the numbers in the figure/table were

generated.» Describe any conclusions you draw from the

figure/table.

34

Bad Example

20

25

30

35

40

45

50

10 12 14 16 18 20 22 24 26 28 30

Wire Gauge

Cour

se C

ompl

etio

n Ti

me

(sec

.)

SAMPLE

35

Good Example

20

25

30

35

40

45

50

10 12 14 16 18 20 22 24 26 28 30

Wire Gauge

Cour

se C

ompl

etio

n Ti

me

(sec

.)

Figure 1. Simulated course completion times

versus wire gauge.

The effect of wire gauge on the course completion time was studied by simulating the circuit in Appendix A using PSpice. Figure 1 shows the simulated course completion times for wire gauges 10-30. It is concluded that 20 gauge wire results in the fastest completion time because it is the best tradeoff between wire resistance and wire weight.

SAMPLE