Engineering Library Reference Promotion

C R C P R E S S

Engineering Library Reference Promotion Autumn / Winter 2017

www.crcpress.com

25% off until

31/01/18

http://www.crcpress.com

WelcomeCRC Press is delighted to announce a special promotion of 130 selected bestselling Engineering library reference books. Until 31/01/18 these top titles will have a 25% discount on their list price.

For more information or to place an order, please contact your local sales representative.

Prices, publication dates and content are correct at time of going to press, but may be subject to change without notice.

http://www.tandfebooks.com

http://www.tandf.co.uk/eupdates

http://www.routledge.com/representatives

ContentsCivil & Mechanical Engineering ....................................................................................................................................... 2

Electrical Engineering ....................................................................................................................................................... 9

Environmental Engineering ........................................................................................................................................... 17

Ergonomics & Industrial Engineering .......................................................................................................................... 24

Index ................................................................................................................................................................................... 25

2nd EditionDummy text to keep placeholderAtomization and Sprays, Second EditionAbove Ground Storage Tanks

Arthur H. Lefebvre and Vincent G. McDonell, University ofCalifornia, Irvine, USAThe second edition of this long-time bestseller provides aframework for designing and understanding sprays for a widearray of engineering applications. The text contains correlationsand design tools that can be easily understood and used inrelating the design of atomizers to the resulting spray behavior.Written to be accessible to readers with a modest technicalbackground, the emphasis is on application rather than in-depththeory. Numerous examples are provided to serve as startingpoints for using the information in the book. Overall, this is a

Practical Guide to Construction, Inspection, and TestingSunil Pullarcot, Kuwait Oil CompanyThere has long been a need for a book that deals with all aspectssubsequent to the design of storage tanks, explainingconstruction methodology to meet international standards. Thisbook deals with every aspect that needs to be known uponreceipt of an order to construct a storage tank at a site, in linewith the requirements spelled out in international standards. Itdescribes all activities that are to be carried out in a sequentialmanner, to ensure adequate quality for the constructed storagetank.

thoroughly updated edition that still retains the practical focus and readability of the originalwork by Arthur Lefebvre.

CRC PressMarket: Engineering - Mechanical March 2017: 279 x 216: 284pp Hb: 978-1-498-73625-1: £121.00 * For full contents and more information, visit: www.crcpress.com/9781498736251

CRC PressMarket: Mechanical Engineering June 2015: 235 x 156: 390pp Hb: 978-1-482-22202-9: £152.00

* For full contents and more information, visit: www.crcpress.com/9781482222029

2nd Edition2nd EditionBridge Deck Analysis, Second EditionAbsorption Chillers and Heat Pumps, Second Edition

Eugene J. Obrien, University College Dublin, Ireland, DamienKeogh, Rambøll, Denmark and Alan O'Connor, TrinityCollege Dublin, IrelandThis second edition combines an explanation of backgroundtheory with a step-by-step guide on the analysis of commonbridge forms. It includes practical examples of everyday problemsin bridge engineering—particularly useful for seniorundergraduates and new engineering graduates. The newedition introduces reliability analysis, an emerging area thatallows bridge engineers to assess risk when maintaining olderor damaged bridges in service. Other chapters are updated toreflect the trend towards more sophisticated analysis and the

more widespread access to finite element software.

Keith E. Herold, Reinhard Radermacher and Sanford A.KleinThis book provides an updated and thorough discussion of thephysics and applications of absorption chillers and heat pumps.An in-depth guide to evaluating and simulating absorptionsystems, this revised edition provides significantly increasedconsistency and clarity in both the text and the workedexamples. The introduction of the Vapor Surfactant theory is amajor new component of the book. This definitive work servesas a resource for both the newcomer and seasoned professionalin the field.

CRC PressMarket: Engineering - Mechanical April 2016: 254 x 178: 354pp Hb: 978-1-498-71434-1: £106.00 * For full contents and more information, visit: www.crcpress.com/9781498714341

CRC PressMarket: Engineering - Civil October 2014: 254 x 178: 351pp Hb: 978-1-482-22723-9: £146.00 * For full contents and more information, visit: www.crcpress.com/9781482227239

Dummy text to keep placeholder3rd EditionCold Gas Dynamic SprayAcoustic Absorbers and Diffusers, Third Edition

Edited by Roman Gr. Maev, University of Windsor, Canadaand Volf Leshchynsky, University of Windsor, CanadaThis text explains how cold gas dynamic spray works and whatit can do. It walks the reader through the first principles of coldspraying all the way through powder preparation, problemsrelated to the transport and injection of a powder into agas-powder jet, metallurgy of coating formation, methods ofcold spray (CS) coatings characterization, and application of thedeposited coatings. Featuring a clear layout and a number ofhigh-quality figures, the book comprises a balanced mixture ofengineering practice-oriented information and theoreticalbackground.

Theory, Design and ApplicationTrevor Cox, University of Salford, UK and Peter D’AntonioThis definitive guide covers the design and application ofabsorbers and diffusers. Surface diffusion is a relatively youngsubject area, and diffuser design, application and characterisationare often not well understood by practitioners. Althoughabsorption is more widely understood, it is also informed bynew research. This text details the evolution and the currentstate of the art in diffuser research and application along withabsorption. It covers a range of practical and theoretical aspectsof absorbers and diffusers and extensive examples of installationsfor practitioners working in the measurement, modelling anddesign of rooms and semi-enclosed spaces as well as in noisecontrol.

CRC Press

CRC PressMarket: Materials Science May 2016: 254 x 178: 334pp Pb: 978-1-466-58442-6: £190.00 * For full contents and more information, visit: www.crcpress.com/9781466584426

Market: Engineering - Mechanical August 2016: 254 x 178: 519pp Hb: 978-1-498-74099-9: £121.00 * For full contents and more information, visit: www.crcpress.com/9781498740999

Browse and order online:www.crcpress.com

CIVIL & MECHANICAL ENGINEERING2

http://www.crcpress.com/9781498736251













Dummy text to keep placeholderDummy text to keep placeholderDipmeter Surveys in Petroleum ExplorationConvective Flow and Heat Transfer from Wavy

Surfaces Madhusadan PatilOil exploration requires proper understanding of the geologicalset-up of any area to make the process economical and effective.This involves geological, geophysical, geochemical surveysincluding studying the lateral variations in litho-stratigraphicunits in the adjoining areas surrounding the bore-hole, donethrough study of Dipmeter logs. This book ‘Dipmeter Surveysin Petroleum Exploration’ giving all the required backup of theother allied subjects for easy and meaningful interpretations ofthe Dipmeter data, so that drilling of dry wells is avoided tomaximum possible extent and new discoveries to be made,thereby enhancing the oil resource of a particular geographical

location.

Viscous Fluids, Porous Media, and NanofluidsAroon Shenoy, SAICO, Arlington, Virginia, USA, MikhailSheremet, Tomsk State University, Russia and Ioan Pop,Babes-Bolyai University, Cluj-Napoca, RomaniaConvective Flow and Heat Transfer from Wavy Surfaces: ViscousFluids, Porous Media, and Nanofluids addresses the wavyirregular surfaces in heat transfer devices. Fluid flow and heattransfer studies from wavy surfaces have received attention,since they add complexity and require special mathematicaltechniques. This book considers the flow and heat transfercharacteristics from wavy surfaces, providing an understandingof convective behavioral changes. CRC Press

Market: EngineeringDecember 2016: 279 x 216: 142pp Hb: 978-1-138-62653-9: £110.00 * For full contents and more information, visit: www.crcpress.com/9781138626539

CRC PressMarket: Engineering - Mechanical August 2016: 235 x 156: 306pp Hb: 978-1-498-76090-4: £121.00 * For full contents and more information, visit: www.crcpress.com/9781498760904

Dummy text to keep placeholderDummy text to keep placeholderDistrict CoolingCritical Urban Infrastructure HandbookTheory and PracticeEdited by Masanori Hamada, Waseda University, Japan

A reference for engineers and facilities professionals involved inthe planning, operations, management, and maintenance of allurban utilities, this handbook addresses water supply andsewerage, power, gas, telecommunications joint utility corridor(utilidor) lifeline facilities, and other critical civil infrastructurelifelines. It covers the design and construction of facilities,maintenance, disaster management, environmental protection,and disaster and emergency recovery measures. It also discussesurban planning, life cycle cost, GIS analysis of lifeline systems,computerized integrated management systems, and the use ofnew materials and technologies.

Alaa A. Olama, American University in Cairo, EgyptSeries: Heat TransferDistrict cooling is a relatively new technology that is beingimplemented in various parts of the world as a way to provideneeded cooling with energy conservation and sustainability. Anup-to-date and comprehensive study of the subject, this bookintegrates the theory behind district cooling planning with itspractical engineering aspects. This combination allows policymakers, engineers, and planners to coordinate efforts in orderto make these systems effective and affordable.

CRC PressMarket: Civil Engineering December 2014: 254 x 178: 581pp Hb: 978-1-466-59204-9: £131.00 * For full contents and more information, visit: www.crcpress.com/9781466592049

CRC PressMarket: Engineering - Mechanical October 2016: 235 x 156: 106pp Hb: 978-1-498-70550-9: £99.00


3rd Edition2nd Edition

Dudley's Handbook of Practical Gear Design andManufacture, Third Edition

Cryogenic Heat Transfer, Second EditionRandall F. Barron, Louisiana Tech University, Ruston, USAand Gregory F. Nellis, University of Wisconsin Madison, USACryogenic Heat Transfer, Second Edition, is an updated andexpanded version of this popular book. The concepts ofcryogenic heat transfer in conduction, convection and radiationare developed and explained, with numerous worked examplesand chapter problems. The new edition features integration ofcomputational software methods, based around the EES softwareproduct. Applications from a wide range of technical areas areexplained. The result is a unique book that can be used byprofessionals working with cryogenics, and graduate students.

Stephen P. Radzevich, APEX Tool Group, LLC, and EATONCorporation, Lexington, South Carolina, USADudley's Handbook of Practical Gear Design & Manufavture, Third Edition, is the definitive reference work available for gearing, gear design, production, inspection, and application. This updated edition provides practical methods of gear design. Gear manufacturing methods for high, medium and low-volume production are discussed. Valuable information for practical gear designers and for gear manufacturers is collected in the book and its extensive appendices.

CRC PressMarket: Engineering - Mechanical May 2016: 254 x 178: 682ppHb: 978-1-482-22744-4: £136.00

CRC PressMarket: Engineering - Mechanical June 2016: 279 x 216: 629pp Hb: 978-1-498-75310-4: £190.00 * For full contents and more information, visit: www.crcpress.com/9781482227444* For full contents and more information, visit: www.crcpress.com/9781498753104

Companion WebsiteNew in Paperbacke-InspectionComplimentary Exam Copy

3CIVIL & MECHANICAL ENGINEERING













2nd EditionDummy text to keep placeholderHandbook of Fluid Dynamics, Second EditionEnergy Modeling and Computations in the Building

Envelope Edited by Richard W. Johnson, Idaho National Laboratory,Idaho Falls, USA (Retired)This book offers balanced coverage of theoretical, computational,and experimental fluid dynamics. Each chapter introduces adifferent topic, discusses the pertinent issues, outlines proventechniques for addressing those issues, and supplies referencesfor further research. Covering all major aspects of classical andmodern fluid dynamics, the second edition includes the latestresearch and engineering applications, new sections onemerging fields, new experimental methods, more numericalapproaches, and additional applications. This text provides an

indispensable resource for those entering and seeking familiarization with the field.

Alexander V. Dimitrov, European Polytechnical University,Construction of Buildings and Facilities Department, BulgariaThis book instills a deeper understanding of the energyinteractions between buildings and the environment. The authorproposes a generalized physics model that describes theseinteractions at the microscopic level via the macroscopiccharacteristics of the building envelope. He presentsmathematical models that can be used to perform quantitativepredictions of the consequences of the energy interactions. Healso reveals easy-to-apply engineering methods concerning thedesign and inspection of the building envelope, taking intoaccount the effects of energy on the envelope. CRC Press

Market: Fluid DynamicsApril 2016: 279 x 216: 1560pp Hb: 978-1-439-84955-2: £272.00

CRC PressMarket: Mechanical EngineeringAugust 2015: 235 x 156: 318ppPack - Book and Ebook: 978-1-498-72320-6: £95.00



Dummy text to keep placeholderDummy text to keep placeholderHandbook of Hydrogen EnergyGeotechnical Design for Sublevel Open Stoping

Edited by S.A. Sherif, University of Florida, Gainesville, USA,D. Yogi Goswami, University of South Florida, Tampa, USA,E.K. (Lee) Stefanakos, University of South Florida, Tampa,USA and Aldo Steinfeld, ETH Zurich, SwitzerlandSeries: Mechanical and Aerospace Engineering SeriesThis text provides the technical know-how for creating ahydrogen-based economy in which hydrogen is the main energycarrier along with electricity. It outlines the benefits andchallenges to converting to a hydrogen economy. It details howhydrogen can be produced efficiently, and how to takeadvantage of it being an abundant and completely renewablefuel. It examines the advantages and challenges in the areas of

Ernesto Villaescusa, Western Australia School of MInes,Kalgoorlie, Western AustraliaPresenting topics according to the conventional process usedby most mining houses, this book covers the design andoperation of sublevel open stoping. Summarizing state-of-the-artpractices encountered during his 25+ years of experience, theauthor discusses increases in sublevel spacing, improvementsin slot rising, and rock mass characterization, as well asmethodologies to design open spans and pillars, rockreinforcement, and fill masses. He also addresses in situ stressconcentration minimization, dilution control action plans, andtechniques to back-analyze and optimize stope wallperformance. hydrogen storage and transportation, and explores ways of efficiently converting it into

other forms of energy.CRC PressMarket: Mining Engineering April 2014: 235 x 156: 541pp Hb: 978-1-482-21188-7: £124.00 * For full contents and more information, visit: www.crcpress.com/9781482211887

CRC PressMarket: Mechanical Engineering July 2014: 254 x 178: 1058pp Hb: 978-1-420-05447-7: £146.00 * For full contents and more information, visit: www.crcpress.com/9781420054477

Dummy text to keep placeholder2nd EditionHeat Pump DryersGround Improvement by Deep Vibratory Methods,

Second Edition Theory, Design and Industrial ApplicationsOdilio Alves-Filho, Norwegian University of Science andTechnology, TrondheimThis book covers the underlying essentials and theory requiredfor the design and application of heat pump dryers. It includescomprehensive layouts of heat pump dryers for a diversity ofmaterials with market value. The equations, diagrams, andprocedures are explained to form the basis for heat pump dryerdesign and dimensioning. The operating conditions, refrigerant,moist air, and product properties are considered, while the heatpump dryers and conventional dryers are compared in terms ofperformance, removal rate, and energy utilization.

Klaus Kirsch, (Formerly) Keller Group plc, Offenbach,Germany and Fabian Kirsch, GuD Consult GmbH, Berlin,GermanyThe second edition of this book outlines the development ofvibratory deep compaction, describes the equipment used, setsout the methods and techniques, and provides state-of-the-artdesign principles and quality control procedures. It also identifiesthe practical limitations of the various methods. Fresh casestudies from around the world are used to illustrate their widerange of application. In its conclusion, the book discussesmethod variations, evaluates the economic and environmentalbenefits of the methods, and gives contractual guidance.

CRC PressMarket: Engineering - Mechanical August 2015: 254 x 178: 345pp Hb: 978-1-498-71133-3: £109.00

CRC PressMarket: Engineering - Civil August 2016: 235 x 156: 234pp Hb: 978-1-482-25756-4: £99.00

* For full contents and more information, visit: www.crcpress.com/9781498711333* For full contents and more information, visit: www.crcpress.com/9781482257564
















Dummy text to keep placeholderDummy text to keep placeholderMultihazard Considerations in Civil InfrastructureInspection, Evaluation and Maintenance of

Suspension Bridges Mohammed M. Ettouney, Weidlinger Associates Inc., NewYork, USA and Sreenivas Alampalli, New York StateDepartment of TransportationSeries: Civil Infrastructure Health and SustainabilityThis book explains and presents the need for MultihazardConsideration (MH) in the management of civil infrastructure,what constitutes MH, and how to address MH in design andanalysis. A generalized theory of MH will serve as the basis ofthe objective treatment of this volume. Use of MH in bridgemanagement (inspection, maintenance, rehabilitation, andreplacement) will serve as the basis for several examples, andnumerous case studies will be presented throughout.

Edited by Sreenivas Alampalli, New York State Departmentof Transportation and William J. Moreau, Formerly ChiefEngineer, New York State Bridge AuthorityThis volume discusses state-of-the-art practice in suspensionbridge inspection, evaluation, and corrosion protection andrehabilitation methods used worldwide. It is written by bridgeowners and practitioners who manage and maintain thesebridges, and is based on their experiences. Its companion volumepresents detailed case studies of specific bridges to give acomprehensive picture of how suspension bridges aremaintained around the world.

CRC PressDecember 2016: 254 x 178: 507pp Hb: 978-1-482-20832-0: £114.00 * For full contents and more information, visit: www.crcpress.com/9781482208320

CRC PressMarket: Structural Engineering August 2015: 235 x 156: 372pp Hb: 978-1-466-59686-3: £109.00 * For full contents and more information, visit: www.crcpress.com/9781466596863

2nd EditionDummy text to keep placeholderMultiphase Flow Handbook, Second EditionInspection, Evaluation and Maintenance of

Suspension Bridges Case Studies Edited by Efstathios Michaelides, Clayton T. Crowe,Washington State University, Pullman, USA and John D.Schwarzkopf, Los Alamos National Laboratory, New Mexico,USASeries: Mechanical and Aerospace Engineering SeriesThe Multiphase Flow Handbook, Second Edition is a thoroughlyupdated and reorganized revision of the late Clayton Crowe’swork, and provides a detailed look at the basic concepts andthe wide range of applications in this important area ofthermal/fluids engineering. Revised by the new editors, EfstathiosE. (Stathis) Michaelides and John D. Schwarzkopf, the new

Edited by Sreenivas Alampalli, New York State Departmentof Transportation and William J. Moreau, Formerly ChiefEngineer, New York State Bridge AuthorityThe inspection, evaluation, maintenance, and rehabilitation ofsuspension bridges continue to evolve. New materials areconstantly being developed, and many advances have beenmade in design, construction, and monitoring practices. Thisbook is written by bridge owners and practitioners who manageand maintain these bridges, based on their actual experiences.Bridge owners who desire to cost-effectively manage bridgesby ensuring uninterrupted mobility and durability and who wantto achieve the goal of extending service life will find this bookinvaluable.

Second Edition begins with two chapters covering fundamental concepts and methodsthat pertain to all the types and applications of multiphase flow. The remaining chapterscover the applications and engineering systems that are relevant to all the types ofmultiphase flow and heat transfer. The twenty-one chapters and several sections of thebook include the basic science as well as the contemporary engineering and technologicalapplications of multiphase flow in a comprehensive way that is easy to follow and beunderstood.

CRC PressMarket: Structural Engineering November 2015: 235 x 156: 312ppHb: 978-1-466-59688-7: £109.00 * For full contents and more information, visit: www.crcpress.com/9781466596887 CRC Press

Market: Engineering - Mechanical September 2016: 279 x 216: 1394pp Hb: 978-1-498-70100-6: £229.00 * For full contents and more information, visit: www.crcpress.com/9781498701006

Dummy text to keep placeholder


Multiphysics and Multiscale ModelingMicroscale and Nanoscale Heat Transfer

Techniques and Applications

Analysis, Design, and Application

Young W. Kwon, Naval Postgraduate School, Monterey,California, USAThis book presents computational methods to be used formultiscale and multiphysics applications, bolstered with examplecases. It discusses the finite element method, boundary elementmethod, molecular dynamics, cellular automata, and latticeBoltzmann method. The author highlights the pros and cons ofeach technique. He also covers proper coupling techniques toapply multiple computational techniques together in order tosolve multiscale and/or multiphysics problems. The book alsocontains some example computer programs to demonstratethe techniques discussed.

Edited by Mourad Rebay, University of ReimsChampagne-Ardenne, France, Sadik Kakaç, TOBB Universityof Economics and Technology, Ankara, Turkey and RenatoM. CottaUse of electronics requires improved thermal packaging andmanagement, and the development of efficient coolingtechniques for them is a key application of microscale heattransfer. Heat exchangers are important in energy systems,chemical processing, and nuclear reactors; and cooling-heatingis a key factor in the design of automobiles and aircraft. Thethermal conductivity of heat transfer fluids can be increased byadding nanoparticles in fluids; heat transfer cooling-heatingcapabilities are thus enhanced, resulting in compact

energy-material saving devices. This book explores related topics and issues.CRC PressMarket: Engineering - Mechanical October 2015: 254 x 178: 407pp Hb: 978-1-482-24458-8: £113.00


CRC PressMarket: Engineering - Mechanical February 2016: 254 x 178: 487pp Hb: 978-1-498-73630-5: £163.00 * For full contents and more information, visit: www.crcpress.com/9781498736305















2nd EditionDummy text to keep placeholderNuclear Engineering Handbook, Second EditionMulti-Stage Flash Desalination

Edited by Kenneth D. Kok, URS SMS, LLC, Aiken, SouthCarolina, USASeries: Mechanical and Aerospace Engineering SeriesBuilding upon the success of the first edition, the NuclearEngineering Handbook, Second Edition, provides a comprehensive,up-to-date overview of nuclear power engineering. Consistingof chapters written by leading experts, this volume spans a widerange of topics in the areas of nuclear power reactor design andoperation, nuclear fuel cycles, and radiation detection. Plantsafety issues are addressed, and the economics of nuclear powergeneration in the 21

st century are presented. The Second Edition

also includes full coverage of Generation IV reactor designs, andnew information on MRS technologies, small modular reactors, and fast reactors.

Modeling, Simulation, and Adaptive ControlAbraha Woldai, International Centre of Water EnergySystems, UAESeries: Engineering Systems and SustainabilityThis book covers modeling, simulation, and adaptive control ofa multi-stage flash (MSF) seawater desalination plant. It outlinesthe principles of MSF desalination and highlights the importanceof the various control systems for large MSF plants. Topics includea satisfactory dynamical model of the plant, an optimal methodof approximating the model to the standardfirst-order-plus-dead-time (FODT) form, a dependable methodof simulation and optimization that can handle the originalunreduced model, and an optimal controller tuning based onintegral criteria. CRC Press

Market: Engineering - Mechanical October 2016: 254 x 178: 978pp Hb: 978-1-482-21592-2: £165.00

CRC PressMarket: Water Science & EngineeringJune 2015: 235 x 156: 352ppPack - Book and Ebook: 978-1-498-72169-1: £102.00 * For full contents and more information, visit: www.crcpress.com/9781482215922


Dummy text to keep placeholderDummy text to keep placeholderNumerical Simulation of Heat ExchangersNeutron DiffusionAdvances in Numerical Heat Transfer Volume VConcepts and Uncertainty Analysis for Engineers and Scientists

Edited by W. J. Minkowycz, University of Illinois at Chicago,USA., E. M. Sparrow, J.P Abraham, Univeristy of St. Thomasand J. M. Gorman, University of Minnesota, Department ofMechanical Engineering, Minneapolis, USASeries: Series in Computational and Physical Processes inMechanics and Thermal SciencesThis book deals with certain aspects of material science,particularly with the release of thermal energy associated withbond breaking. It clearly establishes the connection betweenheat transfer rates and product quality. The editors then sharplydraw the thermal distinctions between the various categoriesof welding processes, and demonstrate how these distinctions

S. Chakraverty, National Institute of Technology Rourkela,Odisha, India and Sukanta NayakDesigned to provide a systematic understanding of nucleardiffusion theory, along with fuzzy/interval/stochastic uncertaintymethods of analysis, this text serves as a guide for graduate andpostgraduate students, teachers, engineers, and researchersacross the globe. In view of the recent developments in nuclearengineering, it is important to study the basic concepts of thisfield, along with diffusion processes for nuclear reactor design.Dealing with uncertainty is a key factor in every field ofengineering and science, and in particular to nuclear problems.Accordingly, this book aims to inform readers about basicconcepts of reactor physics as well as neutron diffusion theory.

are translated into simulation model uniqueness. The book discusses the incorporation ofradiative heat transfer processes into the simulation model.

It also includes uncertainty (in term of fuzzy, interval, and stochastic) and their applicationsin nuclear diffusion problems in a systematic manner along with the recent developments.The presented methods can be applied to other engineering and science disciplines, formodelling physical problems

CRC PressMarket: Engineering - Mechanical April 2017: 235 x 156: 218pp Hb: 978-1-482-25019-0: £95.00 * For full contents and more information, visit: www.crcpress.com/9781482250190

CRC PressMarket: MathematicsMarch 2017: 254 x 178: 184pp Hb: 978-1-498-77876-3: £95.00


6th EditionDummy text to keep placeholderPile Design and Construction Practice, Sixth EditionNonlinear Control of Robots and Unmanned Aerial

Vehicles Michael Tomlinson, (Late) Consulting Engineer, UnitedKingdom and John Woodward, Consulting Engineer, UKThis international piling handbook details current types of pile,piling equipment, and methods. It includes calculations of theresistance of piles to compressive loads, pile groups undercompressive loading, piled foundations for resisting uplift andlateral loading, and the structural design of piles and pile groups.Marine structures, durability of piled foundations, groundinvestigations, and pile testing are also covered—withmiscellaneous problems. This edition has been fully updated toapply the latest structural Eurocodes, along with active British

Standards.

An Integrated ApproachRanjan Vepa, School of Engineering and Material Science,Queen Mary, University of London, England, UKNonlinear Control of Robots and Unmanned Aerial Vehicles: AnIntegrated Approach provides a step-by step-approach todesigning control systems for robot manipulators and unmannedaerial vehicles (UAVs). Integration of sophisticated controltechnology is vital to the design of new emerging mobilevehicles, such as personal air vehicles (PAVs) and the nextgeneration of UAVs. Similar technologies are used in roboticmanipulators, such as the PUMA range now used in automatedmanufacturing systems. This book shows the similarities within

unmanned aerial vehicle and robotic system design, and will serve as a vital resource inthe design of new products and systems.

CRC PressMarket: Civil Engineering October 2014: 254 x 178: 608pp Hb: 978-1-466-59263-6: £137.00 * For full contents and more information, visit: www.crcpress.com/9781466592636CRC Press

Market: Engineering - Mechanical August 2016: 279 x 216: 544pp Hb: 978-1-498-76704-0: £114.00

















3rd EditionDummy text to keep placeholderShallow FoundationsPower Mechanisms of Rotational and Cyclic MotionsBearing Capacity and Settlement, Third EditionBoris M. Klebanov and Morel Groper

This book assists design engineers in making the designtrade-offs and the necessary decisions in the various stages ofthe design in a wide range of engineering applications. It coversmechanisms of rotational motion; variable speed drives;mechanisms of cyclic motion; lubrication systems; andcomponents of mechanisms. The book provides extensivereference information, while stressing the role of the designengineer throughout, as well as the design trade-offs to be madein practical engineering scenarios.

Braja M. Das, formerly at California State University,Sacramento, USAWritten by one of the top researchers in the field, this new,revised edition covers all the latest developments andapproaches to shallow foundation engineering. It providesupdated data and revised theories on the ultimate and allowablebearing capacities of shallow foundations. It includes the mostrecent developments regarding eccentric and inclined loading,the use of stone columns, and settlement computations.Example cases in each chapter illustrate the theories presented.

CRC PressMarket: Engineering - Mechanical December 2015: 279 x 216: 508pp Hb: 978-1-466-57764-0: £113.00 * For full contents and more information, visit: www.crcpress.com/9781466577640

CRC PressMarket: Engineering - Civil January 2017: 235 x 156: 384pp Hb: 978-1-498-73117-1: £108.00 * For full contents and more information, visit: www.crcpress.com/9781498731171

Dummy text to keep placeholder3rd EditionSmart Civil StructuresPractical Guide to the Packaging of Electronics

You-Lin Xu and Jia HeA smart structure integrates sensors, actuators, signal processors,communication networks, power sources, and possibly smartmaterials, to sense and react to its environment. This book runsfrom the fundamentals to the state-of-the-art topics such asenergy harvesting, self-repairing, and life cycle performance. Itcovers structural health monitoring systems and structuralvibration control systems, both of which contain similar hardwaresuch as sensors, signal processors, networks, and power sources,and there are great benefits in considering them together. Itsuits civil engineering students, professionals, and researcherswith its blend of principles and practice.

Thermal and Mechanical Design and Analysis, Third EditionAli JamniaPractical Guide to the Packaging of Electronics: Thermal andMechanical Design and Analysis, Third Edition provides a basicunderstanding of electronics packaging design issues, updatedto reflect recent developments in the field. Early chapters providea foundation in heat transfer, vibration, and life expectancycalculations. Topics include modes of heat removal; impact ofthermal stresses; vibration and stresses; shock management;mechanical, electrical, chemically induced reliability; and more.

CRC PressMarket: Structural Engineering March 2017: 254 x 178: 714pp Hb: 978-1-498-74398-3: £108.00 * For full contents and more information, visit: www.crcpress.com/9781498743983

CRC PressMarket: Engineering - Electrical July 2016: 235 x 156: 342pp Hb: 978-1-498-75395-1: £95.00


Dummy text to keep placeholderDummy text to keep placeholderTall Building DesignRisk Management in Civil InfrastructureSteel, Concrete, and Composite SystemsMohammed M. Ettouney, Weidlinger Associates Inc., New

York, USA and Sreenivas Alampalli, New York StateDepartment of TransportationSeries: Civil Infrastructure Health and SustainabilityThis book presents several original theories for risk, includingTheory of Risk Monitoring, and Theory of Risk Acceptance, inaddition to several analytical models for computing relative andabsolute risk. The book discusses risk limit, states of risk, and theemerging concept of risk monitoring. The interrelationshipsbetween risk and resilience are also highlighted in an objectivemanner. The book includes several practical case studies showinghow risk management and its components can be used to

enhance performance of infrastructures at reasonable costs.

Bungale S. Taranath, Chino Hills, California, USAThis book examines the behavior of structural members andsystems to aid in the structural design of tall buildings inconjunction with the latest building codes. These codeprovisions are subject to change periodically. Familiarity withcurrent methodologies is essential to designing structures thatcomply with legally adapted standards in a safe, economic, andefficient manner. However, the first nine chapters explain thefundamental principles of structural engineering in such amanner as to be entirely independent of code regulations.

CRC PressDecember 2016: 254 x 178: 504pp Hb: 978-1-482-20844-3: £114.00

CRC PressMarket: Structural Engineering July 2016: 254 x 178: 838pp Hb: 978-1-466-55620-1: £114.00 * For full contents and more information, visit: www.crcpress.com/9781482208443* For full contents and more information, visit: www.crcpress.com/9781466556201















5th EditionThe Drilling Manual, Fifth Edition

Edited by Australian Drilling Industry Training CommitteeLimited, Industry Training Committee Limited, New SouthWales, AustraliaThis text is an excellent reference resource for drillers and drillingpersonnel. Of all the technologies employed by hydrologists,hydrogeologists, environmental engineers, and scientistsinterested in subsurface conditions, drilling is one of the mostfrequently used but most poorly understood. Now thisindustry-tested manual, developed by one of the world's leadingauthorities on drilling technology, is available to a worldwideaudience. It is written, illustrated, and peer-reviewed by some

of the world's leading experts, and heavily illustrated with clear diagrams and charts.

CRC PressMarket: Geotechnology, Mining and Petroleum Engineering April 2015: 279 x 216: 800ppHb: 978-1-439-81420-8: £113.00 * For full contents and more information, visit: www.crcpress.com/9781439814208

2nd EditionThe John Zink Hamworthy Combustion Handbook,Second EditionThree-Volume Set

Edited by Charles E. Baukal, Jr., John Zink Company, LLC,Tulsa, Oklahoma, USASeries: Industrial CombustionA major update of the bestselling combustion engineeringreference, the second edition of The John Zink HamworthyCombustion Handbook is now expanded to three standalonevolumes. Volume 1 covers fundamental concepts and theory,Volume 2 examines design and operations, and Volume 3 looks

at the latest industry applications, from burners and flares to thermal oxidizers and vaporcombustors. Each volume contains a wealth of color illustrations and photographs. Thedefinitive guide to industrial combustion, this handbook helps you better meet thechallenges of this dynamic field.

CRC PressMarket: Mechanical Egnineering November 2013: 279 x 216: 1184pp Hb: 978-1-439-83961-4: £291.00 * For full contents and more information, visit: www.crcpress.com/9781439839614








Dummy text to keep placeholder2nd EditionAnalysis and AnalyzersAdvanced DC/DC Converters, Second EditionVolume IIFang Lin Luo, AnHui University, HeFei, China; Nanyang

Technological University, Singapore and Hong Ye, NanyangTechnological University, SingaporeSeries: Power Electronics and Applications SeriesThe production of DC/DC converters occupies the largestpercentage of the total turnover of all conversion equipmentproductions. The purpose of this new edition is to provideadvanced DC/DC converters that are both concise and usefulfor engineering students and practicing professionals. Itintroduces more than 200 topologies of the advanced DC/DCconverters originally developed by authors. All prototypes arenovel approaches and great contributions in modern power

engineering.

Edited by Béla G. Lipták, Editor-in-Chief and Kriszta Venczel,Consultant, South Salem, NYThis book is an invaluable resource for the selection of analyzersused to automatically determine the compositions of liquids,solids, or gases in all industries. Featuring up-to-date coverageand contributions from experts on every continent, the textdiscusses the advantages and disadvantages of various analyzerdesigns, offering application- and method-specific guidance forchoosing the best analyzers. The eBook version places at thereaders' fingertips thousands of web addresses of suppliers andlinks to further reading material, while the thorough index

provides quick access to specific information.

CRC PressMarket: EngineeringOctober 2016: 279 x 216: 1314pp Hb: 978-1-498-72768-6: £178.00

CRC PressMarket: Engineering -Electrical December 2016: 254 x 178: 746pp Hb: 978-1-498-77490-1: £121.00


Dummy text to keep placeholderDummy text to keep placeholderCircuits and Systems for Security and PrivacyAdvanced Manufacturing for Optical Fibers and

Integrated Photonic Devices Edited by Farhana Sheikh, Portland, Oregon, USA andLeonel Sousa, Instituto Superior Técnico, Universidade deLisboa, PortugalSeries: Devices, Circuits, and SystemsThis book begins by introducing the basic theoretical conceptsand arithmetic used in algorithms for security and cryptography,and by reviewing the fundamental building blocks ofcryptographic systems. It then analyzes the advantages anddisadvantages of real-world implementations that not onlyoptimize power, area, and throughput but also resistside-channel attacks. Merging the perspectives of experts fromindustry and academia, the text provides valuable insight and

Abdul Al-Azzawi, Algonquin College, Ottawa, Ontario,CanadaThis book explores the theoretical principles and industrialpractices of high-technology manufacturing. Focusing on fiberoptic, semiconductor, and laser products, the text discussesworkshops, production lines, clean rooms, Lean manufacturingprocesses, continuous improvement, waste reduction, the 5S’s,management support, product improvement, workplace safety,and auditing. Offering a step-by-step approach complete withnumerous figures and tables, detailed references, and a glossaryof terms, the book presents the latest manufacturingachievements and their applications in the high-tech sector,employing the international system of units (SI) throughout.

necessary background for the design of security-aware circuits and systems as well asefficient accelerators used in security applications.

CRC PressMarket: Engineering - Electrical May 2016: 235 x 156: 382pp Hb: 978-1-482-23688-0: £122.00

CRC PressMarket: Engineering - Electrical August 2015: 235 x 156: 220pp Hb: 978-1-498-72945-1: £109.00


3rd EditionDummy text to keep placeholder

Dekker Encyclopedia of Nanoscience andNanotechnology, Third Edition, Seven Volume Set

Advances in Imaging and SensingEdited by Shuo Tang, University of British Columbia,Vancouver, British Canada and Daryoosh SaeedkiaSeries: Devices, Circuits, and SystemsElectronic imaging and sensing systems are used for medicaldiagnosis. In recent years, for example, dental offices have beenswitching to digital X-ray imaging systems. Another growingapplication area is the use of digital infrared imaging systemsfor home inspections which can spot invisible water damage.Of course, electronic imaging and sensing systems are ubiquitousin cellphone, tablet and digital cameras. This book explains thephysical principles of optical electronic imaging and providesinformation relative to its design and operation.

Edited by Sergey Edward Lyshevski, Rochester Institute ofTechnology, New York, USAWith its original publication, the Dekker EncyclopediaNanoscience and Nanotechnology immediately became thereference against which all other nano references are measured.Continuing to cover the field as no other resource, thesix-volume second edition crosses disciplines to examinefundamental nano principles, theories, and methodologies, aswell is the latest information on nano-relevant properties. It alsocovers advances in nanoscale engineering, newly developedsimulation tools, and emerging computational methods.CRC Press

Market: Engineering - Electrical November 2016: 235 x 156: 283pp Hb: 978-1-498-71475-4: £127.00


CRC PressMarket: NanoscienceMarch 2014: 279 x 216: 5150pp Hb: 978-1-439-89134-6: £3427.00 * For full contents and more information, visit: www.crcpress.com/9781439891346


9ELECTRICAL ENGINEERING













Dummy text to keep placeholderDummy text to keep placeholderElectromagnetic Wave Scattering by Aerial andGround Radar Objects

Design of 3D Integrated Circuits and SystemsEdited by Rohit Sharma, Indian Institute of TechnologyRopar, Punjab, IndiaSeries: Devices, Circuits, and SystemsThis book covers 3D circuit and system design, new processesand simulation techniques, alternative communication schemesfor 3D circuits and systems, application of novel materials for 3Dsystems, and the thermal challenges to restrict power dissipationand improve performance of 3D systems. Containingcontributions from experts in industry as well as academia, thetext discusses the use of interposer technology and the role ofThrough-Silicon Vias (TSVs), addresses thermal management formultiprocessor systems-on-chip, and explores ThruChip Interface(TCI), NAND flash memory stacking, and emerging applications.

Edited by Oleg I. Sukharevsky, Kharkov University of AirForces, UkraineThis valuable reference presents the theory, original calculationmethods, and computational results of the scatteringcharacteristics of different aerial and ground radar objects.Featuring radar backscattering diagrams, echo signal amplitudeprobability distributions, and RCS statistics and high-rangeresolution profiles of assorted aircrafts, cruise missiles, and tanks,this book provides essential background for computingscattering in the presence of irregularities, contains integral fieldrepresentations enabling the study of scattering from variouslayered structures, and describes scattering computationtechniques for objects with surface fractures and radar-absorbent

coatings.CRC PressMarket: Engineering - Electrical November 2014: 235 x 156: 324pp Hb: 978-1-466-58940-7: £127.00 * For full contents and more information, visit: www.crcpress.com/9781466589407

CRC PressMarket: Engineering - Electrical July 2014: 254 x 178: 334pp Hb: 978-1-466-57678-0: £154.00 * For full contents and more information, visit: www.crcpress.com/9781466576780

Dummy text to keep placeholderDummy text to keep placeholderElectromagnetics for Electrical MachinesElectric Field Analysis

Saurabh Kumar Mukerji, Aligarh Muslim University, India,Ahmad Shahid Khan and Yatendra Pal Singh, MangalayatanUniversity, Aligarh, IndiaThis book offers a comprehensive yet accessible treatment ofthe linear theory of electromagnetics and its application to thedesign of electrical machines. Leveraging valuable classroominsight gained by the authors during their impressive andongoing teaching careers, this text emphasizes concepts ratherthan numerical methods, providing presentation/projectproblems at the end of each chapter to enhance subjectknowledge. It makes an ideal text for postgraduate-level studentsof electrical, electronics, and communication engineering andphysics. It is also useful to researchers concerned with

electromagnetic-related problems.

Sivaji Chakravorti, Jadavpur University, Kolkata, IndiaThis text begins by introducing the physical and mathematicalfundamentals of electric fields, presenting problems from powerand dielectric engineering to show how the theories are putinto practice. It then discusses finite difference, finite element,charge simulation, and surface charge simulation methods forthe numerical computation of electric fields, providing casestudies for electric field distribution and exploring numericalfield calculation for electric field optimization. The book alsoexplains how high-voltage field optimization studies are carriedout to meet the desired engineering needs.

CRC PressMarket: Engineering - Electrical March 2015: 235 x 156: 568pp Hb: 978-1-482-23336-0: £113.00 * For full contents and more information, visit: www.crcpress.com/9781482233360

CRC PressMarket: Engineering - ElectricalMarch 2015: 235 x 156: 439ppPack - Book and Ebook: 978-1-498-70913-2: £102.00


Dummy text to keep placeholder2nd EditionElectromagnetics through the Finite ElementMethod

Electric Power Distribution Handbook, SecondEdition

A Simplified Approach Using Maxwell's EquationsThomas Allen Short, Electric Power Research Institute,Ballston Spa, New York, USAThis handbook delivers comprehensive coverage of the electricalaspects of power distribution systems. The first few chaptersfocus on equipment-oriented information and applications,while the middle portion discusses reliability and power quality,and the end tackles lightning protection, grounding, and safety.Complete with access to a support website, the Second Editionfeatures a new chapter on overhead line performance, 14 revisedchapters incorporating updates from several EPRI projects,full-color illustrations, fresh graphs and statistics, and newsections on voltage optimization, arc flash, and contact voltage.

José Roberto Cardoso, Universidade de São Paulo, BrazilThis book will be the first to introduce the Finite Element Methodfor modelling the electromagnetic phenomena withmethodologies using only Maxwell Equations. Avoiding allcomplex mathematics, this simplified approach will not onlybenefit undergraduate students, but also engineers andresearchers who are introducing themselves to these numericalmethods. Starting with the fundamentals, this book will providean overview of the Finite Element Methods and will include aphysical analysis in all steps of the methodology presented.

CRC PressMarket: Engineering - Electrical May 2014: 254 x 178: 898pp Hb: 978-1-466-59865-2: £131.00

CRC PressMarket: Engineering - Electrical October 2016: 235 x 156: 198pp Hb: 978-1-498-78357-6: £110.00 * For full contents and more information, visit: www.crcpress.com/9781466598652



ELECTRICAL ENGINEERING10














Dummy text to keep placeholder2nd EditionInformation PhotonicsEncyclopedia of Optical and Photonic Engineering,

Second Edition - Five Volume Set Fundamentals, Technologies, and ApplicationsAsit Kumar Datta, University of Calcutta, Kolkata, India andSoumika Munshi, Jadavpur University, Kolkata, IndiaThe main aim of this book is to introduce the concept ofphotonic information processing technologies to the graduateand post-graduate students, researchers, engineers andscientists. It is expected to give the readers an insight into theconcepts of photonic techniques of processing as a system, thephotonic devices as required components which are applied inthe areas of communication, computation and intelligent patternrecognition.

Edited by Craig Hoffman, Optical Sciences Division, US NavalResearch Laboratory, Washington, District of Columbia, USAand Ronald Driggers, St. Johns Optical Systems, Lake Mary,Florida, USAThis encyclopedia offers a balanced, up-to-date look at thefundamentals of a diverse portfolio of technologies anddiscoveries in areas ranging from x-ray optics to photonentanglement. Featuring contributions from engineers andscientists leading their fields, the second edition not only reflectschanges in optical and photonic engineering that occurred sincethe first edition’s publication, but also boasts a wealth of new

material, expanding the encyclopedia’s length by 25 percent. Plus, this edition containsextensive updates, with significant revisions made throughout the text.

CRC PressMarket: Engineering - Electrical November 2016: 235 x 156: 511pp Hb: 978-1-482-23641-5: £121.00

CRC PressMarket: Electrical Engineering September 2015: 279 x 216: 3858pp Hb: 978-1-439-85097-8: £2105.00 * For full contents and more information, visit: www.crcpress.com/9781482236415* For full contents and more information, visit: www.crcpress.com/9781439850978

Dummy text to keep placeholder2nd EditionInstrumentationHarmonics, Power Systems, and Smart Grids,

Second Edition Operation, Measurement, Scope and Application of InstrumentsN.V.S. Raju, JNTUH College of Engineering, Jagtial,Nachupally (Kondagattu), Kodimial Mandal, Karimnagar,IndiaThis book, Instrumentation: Operation, Measurement, Scopeand Application of Instruments, provides various concepts,theoretical and practical knowledge and develops thetechno-managerial skill in the field of instrumentation. Variouspossible methods of measurements of commonly usedinstruments for measuring various quantities often used inengineering and design are provided, presented and discussedsufficiently from fundamentals to advancements. It aims at

Francisco C. De La Rosa, Consultant, Conroe, Texas, USAThis book provides a comprehensive reference on harmoniccurrent generation, propagation, and control in electrical powernetworks, including the smart grid. Featuring three new chapters,a number of new examples and figures, and updatesthroughout,this edition discusses industry standards to controlharmonic distortion levels, methods to mitigate harmonic effects,propagation of harmonic currents in a distribution network, andpower losses in electrical equipment attributed to harmonicwaveform distortion. It also covers harmonics from FACTS andHVDC technologies, superconductive fault current limiters, andelectric vehicles. providing an insight into various concepts and awareness as well as developments of the

field. Numerical problems and examples and usual situations that occur in industries anddaily life are presented as necessary.

CRC PressMarket: Engineering - Electrical April 2015: 235 x 156: 278pp Hb: 978-1-482-24383-3: £109.00

CRC PressMarket: EngineeringDecember 2016: 254 x 178: 600pp Hb: 978-1-138-62655-3: £95.00



Dummy text to keep placeholder2nd EditionIntroduction to RF Power Amplifier Design andSimulation

Heteroepitaxy of SemiconductorsTheory, Growth, and Characterization, Second Edition

John E. Ayers, Tedi Kujofsa, University of Connecticut, Storrs,USA, Paul Rago, University of Connecticut, Storrs, USA andJohanna RaphaelThis book serves as a comprehensive reference andgraduate-level text on Semiconductor Heteroepitaxy —thecrystal growth of semiconductor layers on dissimilar substratesfor the purpose of making modern semiconductor devicesincluding high-speed transistors, lasers and detectors, digitalcircuits, photovoltaic cells, solid-state lighting, and sensors.Semiconductor Heteroepitaxy has become increasinglyimportant as an enabling technology for computing,communication, energy, lighting, and control systems. The first

Abdullah Eroglu, Purdue University, Fort Wayne, USAThis book provides step-by-step guidance for the design of radiofrequency (RF) power amplifiers, from analytical formulation tosimulation, implementation, and measurement. Demonstratingthe use of computer-aided design (CAD) tools, the text exploresactive device modeling techniques for transistors, parasiticextraction methods for active devices, network and scatteringparameters, resonators, power-sensing devices, and RF filterdesigns for power amplifiers. Featuring numerous illustrationsand examples of real-world engineering applications, this bookis a valuable resource for the creation of efficient,better-performing, low-profile, high-power RF amplifiers.

edition remains the top book in the field because of its comprehensive treatment andfocus on principles. This newest edition includes two entirely new chapters on metamorphicbuffers and devices.


* For full contents and more information, visit: www.crcpress.com/9781482231649CRC PressMarket: Electrical Engineering October 2016: 254 x 178: 643pp Hb: 978-1-482-25435-8: £165.00
















Dummy text to keep placeholder2nd EditionMRILaser Beam Shaping Applications, Second EditionPhysics, Image Reconstruction, and AnalysisEdited by Fred M. Dickey, FMD Consulting LLC., Springfield,

Missouri, USA and Todd E. LizotteSeries: Optical Science and EngineeringThis new edition details the important features of beam shapingand exposes the subtleties of the theory and techniques thatare best demonstrated through proven applications. Newchapters cover illumination light shaping in optical lithography;optical micro-manipulation of live mammalian cells throughtrapping, sorting, and transfection; and laser beam shapingthrough fiber optic beam delivery. The book discussesapplications in lithography, laser printing, optical data storage,stable isotope separation, and spatially dispersive lasers. It alsoprovides a history of the field and includes extensive references.

Edited by Angshul Majumdar, Indraprastha Institute ofInformation Technology, Delhi, India and Rabab KreidiehWard, University of British Columbia, Vancouver, CanadaSeries: Devices, Circuits, and SystemsThis book presents cutting-edge research in magnetic resonanceimaging (MRI) technology, emphasizing compressedsensing-based image reconstruction techniques. Featuringchapters authored by field experts, the text begins with asuccinct introduction to the principles of MRI and then discussesthe technology and applications of T

1rho MRI, the recovery of

highly sampled functional MRIs, the sparsity-based techniquesfor quantitative MRIs, the reconstruction techniques for multi-coil

parallel MRIs, the off-line techniques in dynamic MRI reconstruction, and the latest advancesin brain connectivity analysis using diffusion and functional MRIs.

CRC PressMarket: Engineering - Electrical March 2017: 235 x 156: 430pp Hb: 978-1-498-71441-9: £155.00 * For full contents and more information, visit: www.crcpress.com/9781498714419

CRC PressMarket: Biomedical Science October 2015: 235 x 156: 202pp Hb: 978-1-482-29887-1: £109.00 * For full contents and more information, visit: www.crcpress.com/9781482298871

Dummy text to keep placeholderDummy text to keep placeholderNanoelectronicsMaterials Aspect of ThermoelectricityQuantum Engineering of Low-Dimensional NanoensemblesEdited by Ctirad Uher, University of Michigan, Ann Arbor,

USAThis book is comprised of chapters dedicated to each family ofthermoelectric materials prepared by the leading authorities inthe field. It provides an account of the development of materialsthat are viewed as the most promising for applications asthermoelectric power generators or thermoelectric coolers. Theadvantages and shortcomings of novel thermoelectrical materialsare discussed, and the reader is informed on the materialsaspects of each family of thermoelectric materials: their synthesis,structural properties, thermoelectric parameters, and potentialapplications.

Vijay Kumar Arora, Wilkes University, Pennsylvania, USABased on the quantum-mechanical and high-field effects thathave impact on the design of optoelectronic devices and othermicro-circuits, this book focuses on nanoelectronic and deviceproperties of low dimensional materials and is applicable tonanolayers, nanowires, graphene, and carbon nanotubes. Writtenfor the undergraduate level, this module follows the bottom-upapproach in moving from atomic structure to quantum wellsforming the crux of nanoelectronics. It includes exclusivechapters on high-field charge transport as well as a discussionon associated devices.

CRC PressMarket: Engineering - Mechanical November 2016: 254 x 178: 610pp Hb: 978-1-498-75490-3: £114.00 * For full contents and more information, visit: www.crcpress.com/9781498754903

CRC PressMarket: Nanoscience & TechnologyFebruary 2015: 235 x 156: 430ppPack - Book and Ebook: 978-1-498-70575-2: £95.00 * For full contents and more information, visit: www.crcpress.com/9781498705752

Dummy text to keep placeholderDummy text to keep placeholderNanomaterialsMeasurement and SafetyA Guide to Fabrication and ApplicationsVolume I

Edited by Sivashankar Krishnamoorthy, LuxembourgInstitute of Science and TechnologySeries: Devices, Circuits, and SystemsThis book discusses the scale of nanomaterials andnanomachines, focusing on integrated circuits andmicroelectromechanical systems. It considers differentnanomaterials’ interactions with chemical reactions, biologicalprocesses, and the environment. It examines the mechanicalproperties of nanomaterials and potentialperformance-enhancing treatments. It details accomplishmentsin the use of nanomaterials to create new electronic devices. Itexplores the optical properties of certain nanomaterials and thenanomaterials’ use in optimizing lasers and optical absorbers. It

also describes how nanomaterials from waste products may be used to improve capacitors.

Edited by Béla G. Lipták, Editor-in-Chief and Kriszta Venczel,Consultant, South Salem, NYThis book is an invaluable resource that describes the detectorsused in the measurement of process variables. Featuringup-to-date coverage and contributions from experts on everycontinent, the text offers application- and method-specificguidance for choosing the best measurement device, providingtables of detector capabilities and other practical informationat a glance. The eBook version places at the readers' fingertipsthousands of web addresses of suppliers and links to furtherreading material, while the thorough index provides quick access

to specific information.

CRC PressMarket: EngineeringOctober 2016: 279 x 216: 2200pp Hb: 978-1-498-72764-8: £254.00 * For full contents and more information, visit: www.crcpress.com/9781498727648

CRC PressMarket: Engineering - Electrical December 2015: 235 x 156: 292pp Hb: 978-1-466-59125-7: £109.00 * For full contents and more information, visit: www.crcpress.com/9781466591257
















Dummy text to keep placeholderDummy text to keep placeholderOrganic Solar CellsNoises in Optical Communications and Photonic

Systems Materials, Devices, Interfaces, and ModelingEdited by Qiquan Qiao, South Dakota State University,Brookings, USASeries: Devices, Circuits, and SystemsThis comprehensive book encompasses the full spectrum oforganic solar cell materials, modeling and simulation, and devicephysics and engineering. It discusses active layer, interfacial, andtransparent electrode materials. It explains how to relatesynthesis parameters to morphology of the photoactive layerusing molecular dynamics simulations, as well as offers insightinto coupling morphology and interfaces with charge transportin organic solar cells. It also explores photoexcited carrierdynamics, defect states, interface engineering, nanophaseseparation, inorganic–organic hybrids, tandem structure, and

graphene-based polymer solar cells.

Le Nguyen Binh, Huawei Technologies, Munich, GermanySeries: Optics and PhotonicsTransmitting information over optical fibers requires a highdegree of signal integrity with respect to noise levels existing inoptical systems. The methods and techniques for noiseevaluations are important so that high performance can beobtained. This book provides a fundamental understanding ofnoise generation processes in optical communications andphotonic signals. It discusses techniques for noise evaluation inoptical communication systems, especially digital opticalsystems, as well as transmission system performance and noiseimpacts in photonic processing systems.

CRC PressMarket: Engineering - Electrical November 2016: 254 x 178: 450ppHb: 978-1-482-24694-0: £121.00


CRC PressMarket: Engineering - Electrical March 2015: 235 x 156: 446pp Hb: 978-1-482-22983-7: £113.00


Dummy text to keep placeholderDummy text to keep placeholderOrganic Thin-Film Transistor ApplicationsOptical Imaging DevicesMaterials to CircuitsNew Technologies and Applications

Brajesh Kumar Kaushik, Indian Institute ofTechnology-Roorkee, India, Brijesh Kumar, Sanjay Prajapatiand Poornima MittalText provides information about advanced OTFT (Organic thinfilm transistor) structures, their modeling and extraction ofperformance parameters, materials of individual layers, theirmolecular structures, basics of pi-conjugated semiconductingmaterials and their properties, OTFT charge transportphenomena and fabrication techniques. It includes applicationsof OTFTs such as single and dual gate OTFT based invertercircuits along with bootstrap techniques, SRAM cell designsbased on different material and circuit configurations, lightemitting diodes (LEDs). Besides this, application of dual gate

OTFT in the logic gate, shift register, Flip-Flop, counter circuits will be included as well.

Edited by Ajit Khosla, Lab177 Inc., Chatham, Ontario, Canadaand Yamagata University, Japan and Dongsoo Kim, SamsungElectronics, Suwon, KoreaSeries: Devices, Circuits, and SystemsThis book delivers a comprehensive introduction to opticalimaging and sensing, from devices to system-level applications.Drawing upon the extensive academic and industrial experienceof its prestigious editors and renowned chapter authors, thisauthoritative text explains the physical principles of opticalimaging and sensing, providing an essential understanding ofthe design, operation, and practical applications of opticalimaging and sensing systems. It covers topics such as

silicon-based imaging characteristics, nanophotonic phased arrays, thin-film sensors,label-free DNA sensors, and in vivo flow cytometry.

CRC PressMarket: Engineering - Electrical August 2016: 235 x 156: 351pp Hb: 978-1-498-73653-4: £99.00

CRC PressMarket: Engineering - Electrical October 2015: 235 x 156: 238pp Hb: 978-1-498-71099-2: £109.00


Dummy text to keep placeholderDummy text to keep placeholderPhotoacoustic TomographyOptical Materials

Huabei Jiang, University of Florida, Gainesville, USAPresenting the research of a well-respected pioneer and leadingexpert, this first-of-its-kind book covers the underlying principlesand practical applications of photoacoustic tomography (PAT)in a systematic manner. Written in a tutorial format, the textaddresses nearly every aspect of PAT, from the theory onphotoacoustic effect, image reconstruction methods,instrumentation, and animal studies to the technology’s clinicaluses. The book also discusses advanced methods for quantitativePAT, array-based PAT systems, photoacoustic microscopy (PAM),combinations of PAT/PAM with other imaging methods, andcontrast-agents-based molecular PAT.

Microstructuring Surfaces with Off-Electrode PlasmaNikolay L. Kazanskiy and Vsevolod A. KolpakovThis reference book concentrates on microstructuring surfacesof optical materials with directed fluxes of off-electrode plasmagenerated by high-voltage gas discharge and developingmethods and equipment related to this technique. It coverstheoretical and experimental studies on the electrical andphysical properties of high-voltage gas discharges used togenerate plasma outside an electrode gap. A new class ofmethods and devices that makes it possible to implement aseries of processes for fabricating diffraction microstructures onlarge format wafers is also discussed.

CRC PressMarket: Electrical Engineering December 2014: 235 x 156: 304pp Hb: 978-1-482-26103-5: £127.00 * For full contents and more information, visit: www.crcpress.com/9781482261035

CRC PressMarket: PhysicsMarch 2017: 235 x 156: 211pp Hb: 978-1-138-19728-2: £180.00 * For full contents and more information, visit: www.crcpress.com/9781138197282















Dummy text to keep placeholderDummy text to keep placeholderPower Quality IssuesPhotopolymersCurrent HarmonicsPhotoresist Materials, Processes, and Applications

Suresh Mikkili, National Institute of Technology Goa, Ponda,India and Anup Kumar Panda, National Institute ofTechnology Rourkela, IndiaThis book evaluates shunt active filter (SHAF) control strategiesunder various source voltage conditions using aproportional-integral (PI) controller. It presents instantaneousactive and reactive power (p-q) and instantaneous active andreactive current (I

d-I

q control strategies, supplying detailed

simulation results. It proposes SHAF control strategies using type1 and type 2 fuzzy logic controllers (FLCs) with different fuzzymembership functions (MFs), analyzing their harmonic mitigationand DC link voltage regulation. It also verifies the type 2FLC-based SHAF control strategies using a real-time digital

simulator.

Kenichiro Nakamura, Tokai University, Tokyo, JapanSeries: Optics and PhotonicsPhotopolymers have led to groundbreaking achievements inthe electronics, optical engineering, and medical fields. Atpresent, photopolymers have myriad applications insemiconductor device manufacturing, printed circuit boards(PCBs), ultraviolet (UV) curing, microelectromechanical systems(MEMS), and medical materials. Addressing topics such aschemically amplified resists, immersion lithography, extremeultraviolet (EUV) lithography, and nanoimprinting, this bookcovers photopolymers from core concepts to industrialapplications, providing the chemical formulae and structures ofthe materials discussed as well as practical case studies from

some of the world’s largest corporations.CRC PressMarket: Engineering - ElectricalAugust 2015: 235 x 156: 160ppPack - Book and Ebook: 978-1-498-72962-8: £102.00

CRC PressMarket: Materials Science August 2014: 235 x 156: 189pp Hb: 978-1-466-51728-8: £136.00


Dummy text to keep placeholderDummy text to keep placeholderRadar HydrologyPhotosensitive Glass and Glass-CeramicsPrinciples, Models, and ApplicationsNicholas F. Borrelli, Corning Inc., Corning, New York, USA

This book will discuss how glass and glass ceramic interact withlight, both transiently and permanently. Ways that lightpermanently alter the properties of glass and glass ceramic likethe color, refractive index, and mechanical and chemicalbehaviors will be included. Each photochromatic phenomenonwill be discussed in detail from the physical and chemical originto the method fabrication and ultimately to their utilization.

Yang Hong, University of Oklahoma, Norman, USA andTsinghua University, Beijing, China and Jonathan J. Gourley,NOAA/National Severe Storms Laboratory, Norman,Oklahoma, USAThis comprehensive reference is the only text on the marketsolely devoted to radar hydrology. It provides a theoreticalframework and practical knowledge of radar precipitationestimation. After a brief introduction to radar, the book focuseson the processing of radar data to arrive at accurate estimatesof rainfall, addresses advanced radar sensing principles andapplications, covers each component of the hydrologic cycle indetail, examines state-of-the-art hydrologic models, discussescontemporary approaches in data assimilation, and concludes

with methods, case studies, and prediction system design.

CRC PressMarket: Materials Science June 2016: 235 x 156: 229pp Hb: 978-1-498-74569-7: £152.00 * For full contents and more information, visit: www.crcpress.com/9781498745697 CRC Press

Market: Engineering - Electrical December 2014: 235 x 156: 176pp Hb: 978-1-466-51461-4: £136.00 * For full contents and more information, visit: www.crcpress.com/9781466514614

Dummy text to keep placeholderDummy text to keep placeholder

Renewable Energy SystemsPower Management Integrated Circuits

Simulation with Simulink® and SimPowerSystems™

Edited by Mona M. Hella, Rensselaer Polytechnic Institute,Troy, New York, USA and Patrick Mercier, University ofCalifornia, San Diego, USASeries: Devices, Circuits, and SystemsThis book delivers a modern treatise on mixed-signal integratedcircuit design for power management. Comprised of chaptersauthored by leading researchers from industry and academia,the text describes circuit- and architectural-level innovationsthat meet advanced power and speed capabilities, exploringthe use of new materials such as diamond, gallium arsenide,gallium nitride, and silicon carbide. The book discussescutting-edge design techniques and presents innovative

Viktor Perelmuter, National Technical University, Kharkov,GermanyThis book considers the methods electrical energy renewablesources simulations with SimPowerSystems. Approximately 150models of renewable energy sources made with the use ofSimPowerSystems are appended to the book. The aim of thesemodels is to help with the understanding of SimPowerSystems;to expand on the various electrical engineering fields: industrialelectronics, electrical machines, electrical drives, production,and distribution of the electrical energy; to facilitateunderstanding of various renewable energy system function;and to function as a basis for development of the reader’s ownsystems in this field.

approaches to the integration of new device technologies with main-stream siliconplatforms, encouraging the development of autonomous integrated energy systemmodules.

CRC PressMarket: Engineering - Electrical November 2016: 235 x 156: 389pp Hb: 978-1-498-76598-5: £95.00 * For full contents and more information, visit: www.crcpress.com/9781498765985

CRC PressMarket: Engineering - Electrical May 2016: 235 x 156: 329pp Hb: 978-1-482-22893-9: £122.00 * For full contents and more information, visit: www.crcpress.com/9781482228939
















Dummy text to keep placeholderDummy text to keep placeholder

Structural Health Monitoring of CompositeStructures Using Fiber Optic MethodsSequential Logic and Verilog HDL Fundamentals

Joseph Cavanagh, Santa Clara University, California, USAThis self-contained tutorial comprehensively discusses theanalysis and synthesis of both synchronous and asynchronoussequential machines. These machines are implemented usingVerilog Hardware Description Language (HDL), in accordancewith the Institute of Electrical and Electronics Engineers (IEEE)Standard: 1364-1995. The book first introduces Verilog HDL andthen uses it to design synchronous sequential machines andalternative synchronous sequential machines. Next, the textdescribes the synthesis of asynchronous sequential machinesusing Verilog HDL, and provides synthesis examples ofpulse-mode asynchronous sequential machines using Verilog

HDL.

Edited by Ginu Rajan, The University of New South Wales,Australia and B. Gangadhara PrustySeries: Devices, Circuits, and SystemsThis highly comprehensive introductory book explains the basicsof structural health monitoring aspects of composite structures.This book serve as an all-in-one reference book in which thereader can receive a basic understanding of composite materials,manufacturing methods, the latest types of optical fiber sensorsused for structural health monitoring of composite structures,and demonstrated applications of the use of fiber sensors in avariety of composite material structures. The content drawsupon the authors’ and distinguished contributors’ extensiveresearch/teaching and industrial experience to fully cover the

structural health monitoring of composite materials using fiber optic sensing methods.CRC PressMarket: Computer Science & Engineering October 2015: 254 x 178: 846ppHb: 978-1-498-73822-4: £124.00 * For full contents and more information, visit: www.crcpress.com/9781498738224

CRC PressMarket: Engineering - Electrical September 2016: 235 x 156: 491pp Hb: 978-1-498-73317-5: £140.00 * For full contents and more information, visit: www.crcpress.com/9781498733175

2nd Edition Dummy text to keep placeholder

Synchronous Generators, Second EditionSoft Errors

Ion Boldea, University Politehnica Timisoara, RomaniaThis book explores large- and medium-power synchronousgenerator topologies, steady state, modeling, transients, control,design, and testing. Numerous case studies, worked-outexamples, sample results, and illustrations highlight the concepts.Fully revised and updated to reflect the last decade’s worth ofprogress in the field, the second edition adds coverage ofhigh-power wind generators with fewer or no permanentmagnets (PMs), PM-assisted DC-excited salient pole synchronous

From Particles to CircuitsJean-Luc Autran, Aix–Marseille University, France andDaniela Munteanu, Centre National de la RechercheScientifique (CNRS), Marseille, FranceSeries: Devices, Circuits, and SystemsThis book addresses the problem of soft errors in digitalintegrated circuits subjected to the terrestrial natural radiationenvironment, providing comprehensive knowledge of thecomplete chain of the physics of soft errors. The text discussesparticle interactions with matter, soft-error mechanisms, andinstrumentation developments in environment characterization,particle detection, and real-time and accelerated tests. Itdescribes the latest computational developments, modeling,

generators, autonomous synchronous generators’ control, line switching parameteridentification for isolated grids, synthetic back-to-back load testing with inverter supply,and more.

and simulation strategies for the soft error-rate estimation in digital circuits. It also explorestrends for future technological nodes and emerging devices.

CRC PressMarket: Engineering - Electrical October 2015: 254 x 178: 478pp Hb: 978-1-498-72356-5: £113.00 * For full contents and more information, visit: www.crcpress.com/9781498723565

CRC PressMarket: Engineering - Electrical February 2015: 254 x 178: 439pp Hb: 978-1-466-59083-0: £113.00 * For full contents and more information, visit: www.crcpress.com/9781466590830

Dummy text to keep placeholderDummy text to keep placeholder Through Silicon ViasSolid-State Radiation Detectors Materials, Models, Design, and PerformanceTechnology and Applications Brajesh Kumar Kaushik, Indian Institute of

Technology-Roorkee, India, Vobulapuram Ramesh Kumar,Manoj Kumar Majumder and Arsalan AlamRecent advances in semiconductor technology offer verticalinterconnect access (via) that extend through silicon, popularlyknown as through silicon via (TSV). This book provides acomprehensive review of the theory behind TSVs while coveringmost recent advancements in materials, models and designs.Furthermore, depending on the geometry and physicalconfigurations, different electrical equivalent models for Cu,carbon nanotube (CNT) and graphene nanoribbon (GNR) basedTSVs are presented. Based on the electrical equivalent modelsthe performance comparison among the Cu, CNT and GNR based

TSVs are also discussed.

Edited by Salah AwadallaSeries: Devices, Circuits, and SystemsThis book offers a comprehensive review of new and emergingsolid-state materials-based technologies for radiation detection,integrating aspects of engineering, application physics, andmedical science. Each chapter is structured to address the currentadvantages and challenges of each material and technologypresented, as well as to discuss novel research and applications.Containing contributions from leading experts in industry andacademia, this text provides a valuable reference for engineersand scientists looking to enhance the performance of radiationdetector technology for medical imaging and other applications.

CRC PressMarket: Engineering - Electrical March 2015: 235 x 156: 384pp Hb: 978-1-482-26220-9: £109.00


CRC PressMarket: Engineering - Electrical August 2016: 235 x 156: 216pp Hb: 978-1-498-74552-9: £127.00 * For full contents and more information, visit: www.crcpress.com/9781498745529















Dummy text to keep placeholder3rd EditionVLSI Architectures for Modern Error-CorrectingCodes

Tunable Laser Applications, Third EditionEdited by F.J. Duarte, Interferometric Optics, Rochester, NewYork, USASeries: Optical Science and EngineeringThis book describes the physics and architectures of widelytunable lasers. Fully updated and expanded to address importantadvances in science and technology, the third edition containsnew chapters on tunable laser microscopy and laser isotopeseparation; extends coverage of optical parametric oscillatorsand their application to biomedicine, counter measures,microscopy, and spectroscopy; and discusses new applicationsin astronomy and medicine. Featuring fresh contributions frominternationally recognized experts—including 100+ new pagesand extensive references—this edition provides a timely account

of highly successful tunable laser applications.

Xinmiao Zhang, Case Western Reserve University, Cleveland,Ohio, USA and SanDisk, Milpitas, California, USAThis book discusses practical implementation architectures formodern error-correcting codes, providing details for everyfunctional block as well as the overall decoder architecture.Particular emphases are placed on hard- and soft-decisionReed-Solomon (RS) and Bose-Chaudhuri-Hocquenghem (BCH)codes, and binary and non-binary low-density parity-check(LDPC) codes. Many examples and case studies are included.More importantly, the advantages and drawbacks of differentimplementation approaches and architectures are compared.Thus, this book makes an ideal reference for system andhardware designers and graduate-level courses on VLSI design

and error-correcting coding.CRC PressFebruary 2016: 235 x 156: 14pp Hb: 978-1-482-26106-6: £150.00 * For full contents and more information, visit: www.crcpress.com/9781482261066



Dummy text to keep placeholderUpconverting NanomaterialsPerspectives, Synthesis, and Applications

Edited by Claudia Altavilla, IPCB-CNR, Institute for Polymers,Composites and Biomaterials, Portici, ItalySeries: Nanomaterials and their ApplicationsOver the past decade, high-quality, rare earth-dopedupconversion nanoparticles have been successfully synthesizedwith the rapid development of nanotechnology. The synthesismethods are usually phase-based processes, such as thermaldecomposition, hydrothermal reaction, and ionic liquids-basedsynthesis. At present, the low luminescence efficiency is one ofthe main limiting factors. Many efforts are focused on improvingabsorption efficiency of these systems by different strategies,by using "antenna" molecules, changing host matrix or dopingmaterials, and synthetizing new core-shell systems. This book

provides a fundamental understanding of the mechanics and materials, with particularattention to the design, synthesis and functionalization of upconverting nanoparticles andtheir applications in different fields of research.

CRC PressMarket: Nanoscience & Technology October 2016: 235 x 156: 369pp Hb: 978-1-498-70774-9: £127.00 * For full contents and more information, visit: www.crcpress.com/9781498707749

2nd Edition Variable Speed Generators, Second Edition

Ion Boldea, University Politehnica Timisoara, RomaniaThis book provides extensive coverage of variable speedgenerators in distributed generation and renewable energyapplications around the world. Numerous design and controlexamples illustrate the exposition. Fully revised and updated toreflect the last decade’s worth of progress in the field, the secondedition adds material on doubly fed induction generator controlunder unbalanced voltage sags and nonlinear loads, interiorpermanent magnet claw-pole-alternator systems, high power

factor Vernier permanent magnet (PM) generators, PM-assisted reluctance synchronousmotors/generators for electric hybrid vehicles, and more.

CRC PressMarket: Engineering - Electrical October 2015: 254 x 178: 580pp Hb: 978-1-498-72357-2: £113.00













Dummy text to keep placeholderDummy text to keep placeholderBuilding MaterialsAdvanced Nanomaterials for Wastewater

Remediation Product Emission and Combustion Health HazardsKathleen Hess-Kosa, OMEGA Southwest EnvironmentalConsulting, Canyon Lake, Texas, USAThe construction industry is challenged with building materialscomponents of which are more and more difficult, if notimpossible, to identify. Building material emissions have beenimplicated as a major source of indoor air pollution, and toxicgases, often unidentified, are generated in building fires. BuildingMaterials: Product Emission and Combustion Health Hazardsundertakes the task of identifying building materials emissionand combustion health hazards. This easy-to-read, practical bookis a "composite of multiple and/or obscure sources ofinformation"—intended to minimize the reader’s research timeand confusion when planning healthy building materials in

construction and renovation projects.

Edited by Ravindra Kumar Gautam, University of Allahabad,India and Mahesh Chandra Chattopadhyaya, University ofAllahabad, IndiaSeries: Advances in Water and Wastewater Transport andTreatmentEmerging nanotechnological innovations have great potentialfor wastewater remediation processes. Applications that usesmart nanomaterials of inorganic and organic origin improvetreatment efficiency and lower energy requirements. This bookdescribes the synthesis, fabrication, and application of advancednanomaterials in water treatment processes; their adsorption,transformation into low toxic forms, or degradation phenomena,

and the adsorption and separation of hazardous dyes, organic pollutants, heavy metalsand metalloids from aqueous solutions. It explains the use of different categories ofnanomaterials for various pollutants and enhances understanding of nanotechnology-basedwater remediation to make it less toxic and reusable.

CRC PressMarket: Environmental Science April 2017: 235 x 156: 324pp Hb: 978-1-498-71493-8: £108.00 * For full contents and more information, visit: www.crcpress.com/9781498714938

CRC PressMarket: Water Science & Engineering August 2016: 254 x 178: 430ppHb: 978-1-498-75333-3: £152.00 * For full contents and more information, visit: www.crcpress.com/9781498753333

Dummy text to keep placeholderDummy text to keep placeholderClimate Change and Water ResourcesAdvances in Passive Microwave Remote Sensing of

Oceans Edited by Sangam Shrestha, Mukand S. Babel and VishnuPrasad PandeyWritten by expert authors from around the world, this bookexamines the full scope of climate change science, the impactson the water sector, and all available mitigation and adaptationstrategies. Each chapter provides an analysis of the issues raisedand is supported by appropriate examples and case studies.With a broad scope of related topics, this book is useful to a widerange of readers who are directly or indirectly working withclimate change and water issues.

Victor Raizer, Zel Technologies, LLC, VirginiaThis book demonstrates the capabilities of passive microwave technique for enhanced observations of ocean features, including the detection of (sub)surface events and/or disturbances while laying out the benefits and boundaries of these methods. It represents not only an introduction and complete description of the main principles of ocean microwave radiometry and imagery, but also provides guidance for further experimental studies.

CRC PressMay 2014: 235 x 156: 383pp Hb: 978-1-466-59466-1: £118.00 * For full contents and more information, visit: www.crcpress.com/9781466594661

CRC PressMarket: Environmental Science March 2017: 235 x 156: 262pp Hb: 978-1-498-76776-7: £114.00 * For full contents and more information, visit: www.crcpress.com/9781498767767

Dummy text to keep placeholderDummy text to keep placeholderContaminated Sediments in Freshwater SystemsBoundary Retracement

Frank R. Spellman, Spellman Environmental Consultants,Norfolk, Virginia, USAAssessment of freshwater sediments can determine whetherchemical concentrations are sufficient to cause adverse effectson aquatic organisms or organisms higher in the food chain,including humans. This book presents methods for assessingsediments and includes an integration of physical, chemical,and biological information. It examines the elements of qualityassurance and control programs, considerations for the conductof field surveys, screening-level analyses, chemical analyses,toxicity tests for assessing biological impacts, assessments ofbenthic invertebrate community structure, surveys of fish tumorsand abnormalities, and data presentation and interpretation

techniques.

Processes and ProceduresDonald A. WilsonThe survey and the transference are the distinctive and operativeacts in the transmission of real property and, where they differfrom each other, one must of necessity control the other. Thisbook addresses the aforementioned concepts by externalexplanations in order to understand the discrepancies betweenthem. It also helps to avoid expensive and wasteful litigationover boundaries that were previously not in conflict. The textoffers an extensive review of the law for boundary retracementand cites numerous case examples.

CRC PressMarket: Environmental Science February 2017: 235 x 156: 474pp Hb: 978-1-498-72710-5: £95.00

CRC PressMarket: Water Science & Engineering September 2016: 235 x 156: 373pp Hb: 978-1-498-77517-5: £108.00

* For full contents and more information, visit: www.crcpress.com/9781498727105 * For full contents and more information, visit: www.crcpress.com/9781498775175


17ENVIRONMENTAL ENGINEERING













Dummy text to keep placeholderDummy text to keep placeholderEnvironmental Systems Analysis with MATLAB®Energy Resources

Stefano Marsili-Libelli, University of Florence, ItalyThis book explains how to use leading-edge numericaltechniques to develop simple but successful models ofenvironmental processes or to analyze environmental data sets.Ready-made computer codes in MATLAB

® are available to assist

the reader in adapting his or her problem to the theory describedhere. The material is organized in such a way that the book canbe used either as an end-to-end textbook in environmentalsystems analysis or as a handbook to address a specific problem.

Availability, Management, and Environmental ImpactsKenneth J. Skipka, RTP Environmental Associates Inc.,Westbury, New York, USA and Louis Theodore, ManhattanCollege, New York, USASeries: Energy and the EnvironmentThis book provides an evaluation for each of the current meansand consumption of power generation of the available fuelresources. The book examines resource quantity, resourceavailability, economics, energy quality, conservationrequirements, transportation requirements, deliveryrequirements, operation and manufacturing, regulatory issues,political issues, environmental concerns, cost consequences,advantages, disadvantages, and public acceptance. It definesthe energy issues of availability and management, and provides

CRC PressMarket: Environmental Science March 2016: 254 x 178: 540pp Hb: 978-1-498-70635-3: £122.00 * For full contents and more information, visit: www.crcpress.com/9781498706353

a means of solving energy problems as well as defining the optimal course for the future. CRC PressMarket: Clean TechnologyApril 2014: 235 x 156: 485ppHb: 978-1-466-51740-0: £118.00 * For full contents and more information, visit: www.crcpress.com/9781466517400

Dummy text to keep placeholderDummy text to keep placeholderGeologic Fundamentals of Geothermal EnergyEnergy Security and Sustainability

David R. Boden, Truckee Meadows Community College,Reno, Nevada, USASeries: Energy and the EnvironmentGeothermal energy stands out because it can be used as abaseload resource. This book, unlike others, examines thegeology related to geothermal applications. Geology dictates(a) how geothermal resources can be found, (b) the nature ofthe geothermal resource (such as liquid- or vapor-dominated)and (c) how the resource might be developed ultimately (suchas flash or binary geothermal plants). The compilation anddistillation of geological elements of geothermal systems intoa single reference fills a notable gap.

Edited by Amritanshu Shukla and Atul SharmaThere has been ever increasing interest in understanding thevarious aspects of available resources and production, in termsof need and supply, conservation and environmental impactsand so on. From the current energy scenario, it is very clear thatthere are serious challenges related in achieving energysustainability and security worldwide. The aim of this book is topresent an overview of progress made towards energysustainability addressing concerns regarding carbon emissionand clean energy resources. Keeping this in mind, the book haschapters on all major energy sources which are being utilizedat present, along with those having potential prospects forfuture.

CRC PressMarket: Energy & Clean Technology November 2016: 235 x 156: 399pp Hb: 978-1-498-70877-7: £108.00

CRC PressMarket: Environmental Science September 2016: 235 x 156: 430pp Hb: 978-1-498-75443-9: £127.00 * For full contents and more information, visit: www.crcpress.com/9781498708777* For full contents and more information, visit: www.crcpress.com/9781498754439

Dummy text to keep placeholderDummy text to keep placeholderGroundwater Assessment, Modeling, andManagement

Environmental Forensics FundamentalsA Practical Guide

Ioana Gloria Petrisor, Vista, California, USAThis book contains state-of-the-art information in the emergingfield of environmental forensics. Exemplified through real casestudies, it provides an up-to-date overview of mainenvironmental forensics techniques. Emphasizing methodologiestargeting both the contaminant and the associatedenvironmental matrix, it presents a variety of challengingsituations and offers appropriate solutions through practicalapplication of forensic techniques. The book is meant to functionas a "road map" and it presents users with a comprehensiveforensic toolkit and the knowledge of how to use it inchallenging situations.

Edited by M. Thangarajan, National Geophysical ResearchInstitute, Hyderabad, India and Vijay P. Singh, Texas A&MUniversity, College Station, USAThe book starts with the basics of recapping groundwater andan overview of the development of electrical resistivity methods.It covers the resistivity tomography for the identification ofpotential boreholes in hard rock regions, resource evaluationthrough remote sensing along with GIS, and aquiferparameterization through pumping tests. It discusses theenhancement of yield in hard rock regions through hydraulicfracturing. It also provides an understanding of the flow and

transport mechanism in an aquifer and the recharge mechanism in the vadoze and saturatedzone.

CRC PressMarket: Environmental Toxicology July 2014: 235 x 156: 445ppHb: 978-1-466-57158-7: £110.00

CRC PressMarket: Water Science & Engineering July 2016: 279 x 216: 511ppHb: 978-1-498-74284-9: £165.00



ENVIRONMENTAL ENGINEERING18














Dummy text to keep placeholderDummy text to keep placeholderHydroelectric EnergyHandbook of Environmental EngineeringRenewable Energy and the EnvironmentFrank R. Spellman, Spellman Environmental Consultants,

Norfolk, Virginia, USASeries: Applied Ecology and Environmental ManagementEnvironmental engineers must be well-equipped to deal witha broad array of issues, and this handbook discusses the conceptsand skills they'll need to master, including ecology,ecotoxicology, risk and impact assessments, hydrology,hydrogeology, modeling contaminants, aquatic chemistry,environmental microbiology, statistical analyses, habitat analysisand wetland delineation, resource modeling, sampling, sedimenttransport and river mechanics, streams restoration, atmosphericchemistry, economics, business law for engineers, geographic

Bikash Pandey, Winrock International, Little Rock, Arkansas,USA and Ajoy Karki, Sanima Hydro & Engineering,Kathmandu, NepalSeries: Energy and the EnvironmentProviding essential theory and useful practical techniques forimplementing hydroelectric projects, this book outlines theresources, power generation technologies, applications, andstrengths and weaknesses for hydroelectric technologies.Emphasizing the links between energy and the environment, itserves as a useful background resource and facilitatesdecision-making regarding which renewable energy technologyworks best for different types of applications and regions.information systems (GIS), sustainability, water resources management, green engineering,

energy planning, renewable energy, and many other areas. Including examples, real world case studies, and lessons learned, each chapter containsexercise questions, references, and ample photographs and technical drawings from actualmicro hydropower plants.

CRC PressMarket: Engineering - Environmental September 2015: 254 x 178: 726pp Hb: 978-1-498-70861-6: £161.00 * For full contents and more information, visit: www.crcpress.com/9781498708616

CRC PressOctober 2016: 254 x 178: 419pp Hb: 978-1-439-81167-2: £114.00 * For full contents and more information, visit: www.crcpress.com/9781439811672

Dummy text to keep placeholder2nd EditionHydrologic Remote SensingHandbook of Material Flow AnalysisCapacity Building for Sustainability and ResilienceFor Environmental, Resource, and Waste Engineers, Second Edition

Edited by Yang Hong, University of Oklahoma, Norman,USA, Yu Zhang, Princeton University, New Jersey, USA andSadiq Ibrahim KhanEnvironmental remote sensing plays a critical role in observingkey hydrological components such as precipitation, soil moisture,evapotranspiration and total water storage on a global scale. Aswater security is one of the most critical issues in the world,satellite remote sensing techniques are of particular importancefor emerging regions which have inadequate in-situ gaugeobservations. This book reviews multiple remote sensingobservations, the application of remote sensing in hydrologicalmodeling, data assimilation and hydrological capacity buildingin emerging regions.

Paul H. Brunner and Helmut RechbergerSince the first issue of the handbook was published in October2003, the field of material flow analysis (MFA) has developedrapidly, including hundreds of MFA studies all over the globe.MFA methodology has become a widely used technique inenvironmental management, resources management, and wastemanagement. Today, most MFA done on a global basis uses theMFA methodology described in this handbook, because themethodology offers a concise, transparent, reproducible, andwell-accepted framework for performing MFAs and substanceflow analyses (SFAs).

CRC PressMarket: Environmental Science October 2016: 235 x 156: 395pp Hb: 978-1-498-72666-5: £99.00

CRC PressMarket: Engineering - Environmental December 2016: 235 x 156: 435pp Hb: 978-1-498-72134-9: £108.00


Dummy text to keep placeholderDummy text to keep placeholderIntegrating Scale in Remote Sensing and GISHydraulic Fracturing Impacts and Technologies

Edited by Dale A. Quattrochi, NASA Marshall Space FlightCenter, Huntsville, Alabama, USA, Elizabeth Wentz, Schoolof Geographical Sciences and Urban Planning, Arizona StateUniversity, Tempe, AZ, USA, Nina Siu-Ngan Lam, Departmentof Environmental Sciences, Louisiana State University, BatonRouge, LA, USA and Charles W. Emerson, Western MichiganUniversity, Kalamazoo, USASeries: Remote Sensing Applications SeriesThis book is the most comprehensive documentation of thescientific and methodological advances that have taken placein integrating scale in remote sensing and GIS. It presents newdevelopments in the overall concept of scale within the purviewof the "science of scale" for multispatial, multitemporal, and

A Multidisciplinary PerspectiveEdited by Venki Uddameri, Texas Tech University Lubbock,TX, USA, Audra Morse and Kay J. Tindle, Texas TechUniversity, Lubbock, USAThis book provides a multidisciplinary review of the potentialimpacts of hydraulic fracturing. It examines various technical,environmental, scientific, and social aspects pertaining tohydraulic fracturing. The chapters present balanced coverageof the benefits and potential negative impacts of fracturing bybringing together subject-matter experts from various disciplines.The text identifies emerging technologies, regulatoryinstruments, and management tools to ensure thatunconventional oil and gas production will be sustainable andhave a small footprint on the environment and society. multispectral data, including spatial modeling. It discusses future trends in the integration

of remote sensing and GIS in relation to new Earth observation remote sensing platformsand instruments to be launched in the near future.

CRC PressMarket: Environmental Science June 2015: 235 x 156: 312ppHb: 978-1-498-72117-2: £98.00 * For full contents and more information, visit: www.crcpress.com/9781498721172

CRC PressMarket: Environmental Science January 2017: 235 x 156: 402ppHb: 978-1-482-21826-8: £121.00 * For full contents and more information, visit: www.crcpress.com/9781482218268















Dummy text to keep placeholderDummy text to keep placeholderPlanetary Geodesy and Remote SensingLocal Exhaust Ventilation

Edited by Shuanggen JinWritten by international scientists well established in theplanetary science and remote sensing fields, this book presentsrecent developments of planetary exploration techniques. Itcovers the latest results in planetary science, including theory,methods, measurements, topography, gravity and magneticfield, atmosphere and ionosphere, geomorphology, volcano,craters, internal structure, and water. The book also highlightscomparative studies with the earth in the atmosphere,geomorphology, and interiors of the planets. It discusses futuremissions and future objectives of planetary exploration andscience using the latest advances in remote sensing.

Aerodynamic Processes and Calculations of Dust EmissionsIvan Logachev, Belgorod State Technological University,Russia, Konstantin Logachev and Olga AverkovaThis book examines the computations of gas-borne dust flowsin local exhaust ventilation systems and provides practicalrecommendations for the energy-efficient containment of dustemissions. It discusses basic approaches to operational energysavings for local exhaust ventilation systems, including shapingintake openings of open local exhaust devices after determiningboundaries of vortex areas, increasing the working distance ofsuction openings, inhibiting carryover of dust into aspirationnetwork by promoting rotational aerodynamic fields, and more.Color photos throughout illustrate dust behavior, flow lines, andpatterns.

CRC PressMarket: GeosciencesOctober 2014: 235 x 156: 396pp Hb: 978-1-482-21488-8: £136.00 * For full contents and more information, visit: www.crcpress.com/9781482214888

CRC PressMarket: Engineering - Environmental May 2015: 254 x 178: 564ppHb: 978-1-498-72063-2: £131.00 * For full contents and more information, visit: www.crcpress.com/9781498720632

2nd EditionDummy text to keep placeholderRemediation EngineeringModelling Interactions Between Vector-Borne

Diseases and Environment Using GIS Design Concepts, Second EditionSuthan S. Suthersan, ARCADIS, Newtown, Pennsylvania,USA, John Horst, ARCADIS, Newtown, Pennsylvania, USA,Matthew Schnobrich, ARCADIS, Newtown, Pennsylvania,USA, Nicklaus Welty, ARCADIS, Newtown, Pennsylvania,USA and Jeff McDonough, ARCADIS, Newtown,Pennsylvania, USARemediation engineering has evolved and advanced from thestage of being a sub-discipline of environmental engineeringinto its own engineering discipline supporting the growth of aglobal industry. This fully-updated second edition will capturethe fundamental advancements that have taken place duringthe last two decades, within the sub-disciplines that form the

Hassan M. Khormi, Umm al-Qura University, Mecca, SaudiArabia and Lalit Kumar, University of New England, Armidale,AustraliaThis timely and groundbreaking work demonstrates how todevelop models of vector-borne disease risks based on differentenvironmental and socioeconomic variables and to assess theassociation between these variables and their vectors in ageographic information system (GIS) environment. It addressesnew spatial approaches and techniques based on location andenvironment. The book also introduces methods to identify,determine, and analyze the trend, movement, and distributionof diseases and the vectors that transmit disease.

foundation of the remediation engineering platform. The book will cover the entire spectrumof current technologies that are being employed in this industry, and will also touch onfuture trends and how practitioners should anticipate and adapt to those needs.

CRC PressMarket: Enviromental Science May 2015: 235 x 156: 262pp Hb: 978-1-482-22738-3: £109.00 * For full contents and more information, visit: www.crcpress.com/9781482227383

CRC PressDecember 2016: 279 x 216: 603pp Hb: 978-1-498-77327-0: £108.00 * For full contents and more information, visit: www.crcpress.com/9781498773270

Dummy text to keep placeholderDummy text to keep placeholderRemediation of Heavy Metals in the EnvironmentPharmaceutical Accumulation in the Environment

Edited by Jiaping Paul Chen, National University ofSingapore, Lawrence K. Wang, Engineering Consultant,Albany, New York, USA, Mu-Hao S. Wang, Lenox Instituteof Water Technology, Massachusetts, USA, Yung-Tse Hung,Cleveland State University, Ohio, USA and Nazih K.Shammas, Lenox Institute of Water Technology,Massachusetts, USASeries: Advances in Industrial and Hazardous Wastes TreatmentThis book provides in-depth coverage of environmental pollutionsources, waste characteristics, control technologies,management strategies, facility innovations, process alternatives,costs, case histories, effluent standards, and future trends in

Prevention, Control, Health Effects, and Economic ImpactEdited by Walter E. Goldstein, Goldstein ConsultingCompany, Las Vegas, Nevada, USAThis book describes health impact concerns and technologiesin place and in development, and offers steps leading toproposed solutions. It suggests ways to manage risks to meetchallenges that include both private enterprise initiatives andpublic sector involvement. It proposes the type of controlsneeded to address pharmaceutical contamination, stressingbioreactors of particular types, augmented by the processmodifications needed. The book covers the impact and changesneeded at sites such as hospitals, pharmaceutical factories, wastetreatment plants, water purification sites, farms, and households. waste treatment processes. It delineates methodologies, technologies, and the regional

and global effects of important pollution control practices. It focuses on toxic heavy metalsin the environment, various heavy metal decontamination technologies, brownfieldrestoration, and industrial, agricultural, and radioactive waste management. It discussesthe importance of metals such as lead, chromium, cadmium, zinc, copper, nickel, iron, andmercury.

CRC PressMarket: Environmental Toxicology June 2014: 235 x 156: 262ppHb: 978-1-466-51745-5: £109.00 * For full contents and more information, visit: www.crcpress.com/9781466517455

CRC PressMarket: Environmental Engineering November 2016: 254 x 178: 528pp Hb: 978-1-466-51001-2: £127.00 * For full contents and more information, visit: www.crcpress.com/9781466510012


ENVIRONMENTAL ENGINEERING20














Dummy text to keep placeholderDummy text to keep placeholder Science, Information, and Policy Interface for

Effective Coastal and Ocean ManagementRemote Sensing for SustainabilityEdited by Qihao Weng, Indiana State University, Terre Haute,USASeries: Remote Sensing Applications SeriesRemote Sensing for Sustainability introduces the current state ofthe art remote sensing knowledge integral for monitoring theworld’s natural resources and environments, managing exposureto natural disasters and man-made risks, and helping understandthe sustainability and productivity of natural ecosystems. Thiscomprehensive guide, which can serve to professors, researchers,and students alike, takes in consideration the United Nations setof sustainable development goals and intends to contribute tothe GEO’s Strategic Plan by addressing and exemplifying anumber of societal benefit areas of remote sensing data sets,

methods, and techniques for sustainable development.

Edited by Bertrum H. MacDonald, Dalhousie University,School of Information Management, Halifax, Nova Scotia,Canada, Suzuette S. Soomai, Dalhousie University, Schoolof Information Management, Halifax, Nova Scotia, Canada,Elizabeth M. De Santo, Department of Earth andEnvironment, Franklin & Marshall College, Lancaster,Pennsylvania, USA and Peter G. WellsA collaborative effort among world experts, this book examinesthe role of information—particularly scientific information—inthe policy-making and decision-making processes in coastaland ocean management. It explores the different types ofscience–policy interfaces existing within and between differentorganizations, as well as the various roles that different types of

non-governmental organizations play in producing and disseminating information. Usefulto all major groups in the policy-making process, it increases understanding of catalystsand barriers to communicating research findings while pointing to directions for futureresearch.

CRC PressNovember 2016: 235 x 156: 357pp Hb: 978-1-498-70071-9: £140.00 * For full contents and more information, visit: www.crcpress.com/9781498700719

CRC PressMarket: Environmental Science May 2016: 235 x 156: 474pp Hb: 978-1-498-73170-6: £95.00 * For full contents and more information, visit: www.crcpress.com/9781498731706

Dummy text to keep placeholderRemote Sensing of Water Resources, Disasters, andUrban Studies

Edited by Prasad S. Thenkabail, Ph.D., U.S. GeologicalSurvey, Arizona, USASeries: Remote Sensing HandbookThis book is the most comprehensive documentation of thescientific and methodological advances that have taken placein understanding remote sensing data, methods, andapplications over last 50 years. In a very practical way itdemonstrates the experience, utility, methods and models usedin studying a wide array of water applications. There are morethan 100 leading global experts in the field contributing to thiswork.

CRC PressMarket: GIS and Remote Sensing October 2015: 279 x 216: 673pp Hb: 978-1-482-21791-9: £167.00 * For full contents and more information, visit: www.crcpress.com/9781482217919



Terrestrial Ecosystem Research Infrastructures

Remotely Sensed Data Characterization,Classification, and Accuracies

Challenges and OpportunitiesEdited by Abad Chabbi, INRA Centre Poitou-Charentes,Lusignan, France and Henry W. Loescher, NationalEcological Observatory Network, Boulder, Colorado, USATerrestrial Ecosystem Research Infrastructures: Challenges and Opportunities reveals how environmental research infrastructures (RIs) provide new valuable insights on ecological processes that cannot be realized by more traditional short-term funding cycles and are integral to understand our changing world. This book bonds the latest knowledge on environmental RIs, the challenges in creating them, their place in addressing scientific frontiers, and the new perspectives they bear.

Edited by Prasad S. Thenkabail, Ph.D., U.S. GeologicalSurvey, Arizona, USASeries: Remote Sensing HandbookA comprehensive documentation of the scientific andmethodological advances in remote sensing data, methods, andapplications over last 50 years, this highly practical bookdemonstrates the experience, utility, methods, and models usedin studying a wide array of land applications. Leading expertson global geographic coverage, study areas, and array of satelliteand sensors contribute to this unique handbook. With all figuresprinted in color, chapters represent a thorough documentation

of advancement in the field, bringing us to where we are now and highlighting futurepossibilities.



CRC PressMarket: GIS and Remote Sensing October 2015: 279 x 216: 678pp Hb: 978-1-482-21786-5: £167.00 * For full contents and more information, visit: www.crcpress.com/9781482217865

CRC PressMarket: Environmental Science February 2017: 235 x 156: 534pp Hb: 978-1-498-75131-5: £127.00 * For full contents and more information, visit: www.crcpress.com/9781498751315











Dummy text to keep placeholder3rd EditionUncertainty Modelling and Quality Control forSpatial Data

The Handbook of Groundwater Engineering, ThirdEdition

Edited by Shi Wenzhong, The Hong Kong PolytechnicUniversity, Kowloon, Bo Wu and Alfred SteinThe rapid developments in GIS such as data integration andrepresentation, spatial data products, and new spatial datamining methods, are forcing users to deal with data of unknownor ambiguous quality; thus, unpredictable risk in decision makingis inevitable. This book covers aspects of spatial data quality thathave been scarcely addressed. In the era of big data, the massvolume of heterogeneous data and the proper use of theacquired geospatial data remain a significant challenge for GISusers and need to be investigated.

Edited by John H. Cushman and Daniel M. Tartakovsky,University of California - San Diego, La Jolla, USAThis new edition adds several new chapters and is thoroughlyupdated to include data on new topics such as hydraulicfracturing, CO

2 sequestration, sustainable groundwater

management, and more. Providing a complete treatment of thetheory and practice of groundwater engineering, this newhandbook also presents a current and detailed review of howto model the flow of water and the transport of contaminantsboth in the unsaturated and saturated zones, covers theprotection of groundwater, and the remediation of contaminatedgroundwater.

CRC PressMarket: Environmental Science November 2015: 235 x 156: 294pp Hb: 978-1-498-73328-1: £102.00

CRC PressMarket: Water Science & Engineering November 2016: 279 x 216: 1074pp Hb: 978-1-498-70304-8: £159.00


Dummy text to keep placeholder2nd EditionUnderground Aqueducts HandbookThe Science of Renewable Energy, Second Edition

Edited by Andreas N. Angelakis, Institute of Iraklion, Hellas,Greece, Eustathios Chiotis, National Institute of GeologicalResearch, Greece, Saeid Eslamian and Herbert Weingartner,University of Salzburg, AustriaThis book presents the major engineering achievements inunderground aqueducts from around the world and throughouthistory. It provides valuable insights into water technologies andmanagement with respect to durability, adaptability to theenvironment, and sustainability. Comparisons of thetechnological underground aqueduct developments fromseveral regions are made. These technologies are theunderpinning of modern achievements in water supplyengineering and water management practices, and current

Frank R. Spellman, Spellman Environmental Consultants,Norfolk, Virginia, USAThis book presents a multidisciplinary approach to renewableenergy, covering physical and engineering approaches andaddressing economic, social, environmental, and policy issues.It surveys all of the principal renewable energy sources availableand uses straightforward language with little emphasis placedon math and theoretical science. Instead, the emphasis is placedon the technical aspects and practical applications of renewableenergy. This new edition is updated and adds information onthe latest innovations related to all types of renewable energysources and the related environmental implications.

issues of sustainability, cost-effectiveness, and decentralization have led engineers toconsider combining older proven technologies with modern infrastructure advancements.

CRC PressMarket: Energy & Clean Technology June 2016: 254 x 178: 559ppHb: 978-1-498-76047-8: £116.00 * For full contents and more information, visit: www.crcpress.com/9781498760478

CRC PressMarket: Water Science & Engineering November 2016: 235 x 156: 522pp Hb: 978-1-498-74830-8: £127.00


2nd EditionDummy text to keep placeholderUrban Storm Water Management, Second EditionTrace Elements in Waterlogged Soils and Sediments

Hormoz Pazwash, Boswell Engineering, South Hackensack,New Jersey, USAThis revised edition of a bestseller includes new information onstorm water management systems, bio-filtration, collection andreuse, and more. It discusses alternative methods such as porouspavements, rain gardens, green roofs, and other systems thatare becoming increasingly popular and forming the future ofstorm water management. It offers a more detailed presentationof storm water management systems, and in particular,bio-filtration basins; comparative analysis of effectiveness andcosts of best management practices (BMPs); and discussion ofmeans of collecting storm water.

Edited by Jörg Rinklebe, Institute for Soil Engineering, Water-and Waste-Management, University of Wuppertal, Germany,Anna Sophia Knox, Savannah River National Laboratory,Aiken, South Carolina, USA and Michael Paller, SavannahRiver National Laboratory, Aiken, South Carolina, USASeries: Advances in Trace Elements in the EnvironmentMany wetlands around the world act as sinks for pollutants, inparticular for trace elements. In comparison to terrestrialenvironments, wetlands are still far less studied. A collaborativeeffort among world experts, this book brings the currentknowledge concerning trace elements in temporary waterloggedsoils and sediments together. It discusses factors controlling the

dynamics and release kinetics of trace elements and their underlying biogeochemicalprocesses. It also discusses current technologies for remediating sites contaminated withtrace metals, and the role of bioavailability in risk assessment and regulatory decisionmaking. This book is intended for professionals around the world in disciplines related tocontaminant bioavailability in aquatic organisms, contaminant fate and transport,remediation technologies, and risk assessment of aquatic and wetland ecosystems.

CRC PressMarket: Water Science & Engineering February 2016: 254 x 178: 684pp Hb: 978-1-482-29895-6: £106.00 * For full contents and more information, visit: www.crcpress.com/9781482298956

CRC PressJuly 2016: 254 x 178: 386pp Hb: 978-1-482-24051-1: £121.00 * For full contents and more information, visit: www.crcpress.com/9781482240511


22 ENVIRONMENTAL ENGINEERING













Dummy text to keep placeholderDummy text to keep placeholderWater Policy and Planning in a Variable andChanging Climate

Urban Water Reuse HandbookEdited by Saeid Eslamian, Isfahan University of Technology,IranRapid population growth, along with drought, water-intensiveenergy development, climate change conditions, and a numberof other factors are all stressors on world water supplies. In manycountries throughout the world, water reuse has proved to bean effective and safe means to help satisfy growing waterdemands and offset scarcity. This book provides the latestinformation on water reuse applications with a focus on urbanareas. It examines numerous new and alternative methods forsustainable water supplies.

Edited by Kathleen A. Miller, National Center for Atmospheric Research, Colorado, USA, Alan F. Hamlet, University of Notre Dame, Indiana, USA, Douglas S. Kenney, University of Colorado, Boulder, USA and Kelly T. Redmond, the Desert Research Institute, Nevada, USA

Series: Drought and Water Crises

Growing populations, limited water availability, and changing

CRC PressMarket: Water Science & Engineering December 2015: 279 x 216: 1141pp Hb: 978-1-482-22914-1: £182.00 * For full contents and more information, visit: www.crcpress.com/9781482229141

social values have increased the complexity of water resource planning. Water providers and other stakeholders are struggling to understand the impacts of global climate change on water supplies, water demands and vulnerability of source-area

environmental resources and socio-ecological systems. This book provides insights on these issues and describes strategies for building adaptive capacity while improving environmental stewardship. It helps readers understand patterns of water availability, existing policy problems and the potential impacts of climate change.CRC PressMarket: Water Science & EngineeringJune 2016: 254 x 178: 434ppHb: 978-1-482-22797-0: £129.00 * For full contents and more information, visit: www.crcpress.com/9781482227970

2nd Edition


Wetland Soils

Water and Wastewater Conveyance

Genesis, Hydrology, Landscapes, and Classification, Second Edition

Pumping, Hydraulics, Piping, and Valves

Edited by Michael J. Vepraskas, North Caroline StateUniversity Raliegh, USA, and Christopher B. Craft, IndianaUniversity, Bloomington, USABoundaries of a wetland must be identified and located in thefield by examining three parameters: wetland plants, wetlandhydrology, and hydric soils. This book explains how wetland soilsare formed, described, and can be identified in the field. Thenew edition is a major revision of the 2000 book. Written byscientists with extensive field and academic experience, itcontains 11 new chapters, updates throughout, and augmentsthe previous material on wetland functions and restorations,while maintaining the field-oriented focus of the first book.

Frank R. Spellman, Spellman Environmental Consultants,Norfolk, Virginia, USAWater and Wastewater Conveyance: Pumping, Hydraulics, Piping,and Valvesprovides fundamental, basic information on theconveyance of water and wastewater. Written in straight-forwardand easy-to-understand language for professionals andnon-professionals alike, it provides the techniques to assist waterand wastewater operators to better understand basic pumpoperations and applications, maintenance regimens, andtroubleshooting procedures. Addressing a multitude of waterquality issues, it provides an introduction to water hydraulics,piping systems, tubes, hoses, and ancillaries as well as valves,and the maintenance requirements of each. It also discusses

common operational problems and their appropriate corrective actions. Definitions of keyterms and self-examination questions are provided at the end of each chapter.

CRC PressMarket: Environmental Engineering December 2015: 254 x 178: 508pp Hb: 978-1-439-89698-3: £113.00 * For full contents and more information, visit: www.crcpress.com/9781439896983

CRC PressMarket: Water Science & Engineering August 2016: 235 x 156: 423ppHb: 978-1-498-77172-6: £121.00 * For full contents and more information, visit: www.crcpress.com/9781498771726

4th EditionWater and Wastewater Finance and PricingThe Changing Landscape, Fourth Edition

Edited by George A. Raftelis, Raftelis Financial Consultants,Charlotte, North Carolina, USAThis new edition updates all areas covered in the previouseditions, and substantially expands topics to include major trendsin the water and wastewater finance and pricing; managementstructures supporting finance and pricing; water budget pricing;reuse water pricing; wholesale and wheeling rates; computermodeling of financial and pricing systems; finance and pricingmanagement graphics and reports; risk management inestablishing water and wastewater rates and selecting alternativedelivery methods; overview of stormwater finance, datamanagement, and pricing; and public education outreach.

CRC PressMarket: Water Science & Engineering July 2014: 254 x 178: 596ppHb: 978-1-466-57730-5: £137.00 * For full contents and more information, visit: www.crcpress.com/9781466577305


ENVIRONMENTAL ENGINEERING 23












Dummy text to keep placeholderDummy text to keep placeholderNanofinishing Science and TechnologyDecision SciencesBasic and Advanced Finishing and Polishing ProcessesTheory and Practice

Edited by Vijay Kumar Jain, Indian Institute of Technology,Department of Mechanical Engr.Series: Micro and Nanomanufacturing SeriesFinishing is the final operation after a part is sized and shaped.Currently in high tech industries, there is a demand for nanolevel surface finishing of components. This process is done toimprove the surface finish, to remove the recast layer, or toremove surface and sub-surface defects. The result is low friction,longer product life, and low power requirements. Equallyimportant is the aesthetic aspect of the product. This topic isgrowing very fast due to technology as well as from a sciencepoint of view. Books on this subject are very limited, particularly

ones that deal with both the science as well as the technology aspects.

Edited by Raghu Nandan Sengupta, Aparna Gupta,Rensselaer Polytechnic Institute, Troy, New York, USA andJoydeep Dutta, Indian Institute of Technology, KanpurThis reference book, which covers a variety of topics rangingfrom Operations Research to Statistical Tools, Meta-Heuristicstechniques, Network & Game theory, Time Series Analysis,Inventory Theory, Queueing Theory, Neural Network, DecisionSupport System, Simulation, etc., is an attempt to consolidatethe whole gamut of tools, techniques and methodologiesdeveloped and used in different areas of Decision Sciences, bein biological sciences, physics, statistics, marketing, finance, civilengineering, computer science, mechanical engineering,sociology, etc.

CRC PressMarket: Engineering - Industrial and Manufacturing October 2016: 254 x 178: 1026ppHb: 978-1-466-56430-5: £229.00

CRC PressMarket: Engineering-Industrial & Manufacturing December 2016: 235 x 156: 655ppHb: 978-1-498-74594-9: £95.00

* For full contents and more information, visit: www.crcpress.com/9781466564305 * For full contents and more information, visit: www.crcpress.com/9781498745949

Dummy text to keep placeholderDummy text to keep placeholderSafety and Reliability in the Oil and Gas IndustryHandbook of Construction ManagementA Practical ApproachScope, Schedule, and Cost Control

B.S. Dhillon, University of Ottawa, Department of MechanicalEngineering, Ontario, CanadaEach year billions of dollars are spent in the area of oil and gasto design, construct/manufacture, operate, and maintainequipment/systems around the globe. Safety and reliability hasbecome an important issue due to various types of accidentsand problems over the years. There has been a large number ofarticles on safety and reliability in the oil and gas industry.However, there is no book that covers both topics within itsframework. This book combines these two topics into a singlevolume.

Edited by Abdul Razzak Rumane, Advisor and Director,Construction Management, Sijjeel General Commerce andContracting Co. W.L.L. Kuwait.Series: Systems Innovation Book SeriesThis handbook provides significant information and guidelinesto manage construction projects. Divided into nine chapters,each chapter is further divided into sections covering topicsrelated to and important for understanding quality constructionproject management concepts. The handbook provides all theinformation and guidelines construction professionals shouldknow so they can manage construction projects from inceptionof a project to the issuance of a completion certification.

CRC PressMarket: Occupational Health & Safety April 2016: 235 x 156: 213ppHb: 978-1-498-74656-4: £95.00

CRC PressMarket: Engineering - Industrial & Manufacturing August 2016: 254 x 178: 854ppHb: 978-1-482-22664-5: £127.00


3rd EditionMetal Cutting Theory and Practice, Third Edition

David A. Stephenson, Ford Motor Company, Michigan, USAand John S. Agapiou, General Motors, Pontiac, Michigan,USAWith many of its chapters revised, this edition continues toprovide a complete reference covering the latest technology inmetal cutting tools, processes, and equipment. Major updatescover FEA methods, 5-axis machining, titanium and nickelmachining, and minimum quantity lubrication machining. TheMWL section is now expanded into a complete chapter. Newchapters cover accuracy and error compensation as well as gearmachining.

CRC PressMarket: Engineering - Industrial & Manufacturing March 2016: 254 x 178: 947ppHb: 978-1-466-58753-3: £163.00 * For full contents and more information, visit: www.crcpress.com/9781466587533


24 ERGONOMICS & INDUSTRIAL ENGINEERING











Tall Building Design ............................................................. 7Nanoelectronics ................................................................. 12GA Terrestrial Ecosystem ResearchInfrastructures ..................................................................... 21

Nanofinishing Science and Technology .................. 25Nanomaterials .................................................................... 12

Geologic Fundamentals of GeothermalEnergy ..................................................................................... 18

Above Ground Storage Tanks ......................................... 2Absorption Chillers and Heat Pumps, SecondEdition ....................................................................................... 2

Through Silicon Vias ......................................................... 15Trace Elements in Waterlogged Soils andSediments .............................................................................. 23

Neutron Diffusion ................................................................. 6Noises in Optical Communications and PhotonicSystems ................................................................................... 13Geotechnical Design for Sublevel Open

Stoping ...................................................................................... 4Acoustic Absorbers and Diffusers, ThirdEdition ....................................................................................... 2

Tunable Laser Applications, Third Edition ............... 16

UNonlinear Control of Robots and Unmanned AerialVehicles ..................................................................................... 6Nuclear Engineering Handbook, SecondEdition ....................................................................................... 6Numerical Simulation of Heat Exchangers ............... 6

Ground Improvement by Deep Vibratory Methods,Second Edition ....................................................................... 4Groundwater Assessment, Modeling, andManagement ....................................................................... 18

H

Advanced DC/DC Converters, SecondEdition ....................................................................................... 9Advanced Manufacturing for Optical Fibers andIntegrated Photonic Devices ............................................ 9Advanced Nanomaterials for WastewaterRemediation ......................................................................... 17Advances in Imaging and Sensing ............................... 9

Uncertainty Modelling and Quality Control for SpatialData ......................................................................................... 23Underground Aqueducts Handbook ........................ 23Upconverting Nanomaterials ...................................... 16Urban Storm Water Management, SecondEdition ..................................................................................... 23

OOptical Imaging Devices ................................................. 13Optical Materials ................................................................ 13

Handbook of Construction Management .............. 25Handbook of Environmental Engineering .............. 19Handbook of Fluid Dynamics, SecondEdition ....................................................................................... 4

Advances in Passive Microwave Remote Sensing ofOceans .................................................................................... 17Analysis and Analyzers ....................................................... 9Atomization and Sprays, Second Edition ................... 2

Urban Water Reuse Handbook .................................... 24

VOrganic Solar Cells ............................................................ 13Organic Thin-Film Transistor Applications ............. 13

PHandbook of Groundwater Engineering, Third Edition,The ............................................................................................ 23Handbook of Hydrogen Energy ...................................... 4Handbook of Material Flow Analysis ........................ 19

B Variable Speed Generators, Second Edition ........... 16VLSI Architectures for Modern Error-CorrectingCodes ....................................................................................... 16

Pharmaceutical Accumulation in theEnvironment ........................................................................ 20Harmonics, Power Systems, and Smart Grids, Second

Edition ..................................................................................... 11Boundary Retracement ................................................... 17Bridge Deck Analysis, Second Edition .......................... 2

WPhotoacoustic Tomography ......................................... 13Photopolymers .................................................................... 14Photosensitive Glass and Glass-Ceramics ............... 14Pile Design and Construction Practice, SixthEdition ....................................................................................... 6

Heat Pump Dryers ................................................................ 4Heteroepitaxy of Semiconductors .............................. 11Hydraulic Fracturing Impacts andTechnologies ........................................................................ 19Hydroelectric Energy ......................................................... 19

Building Materials .............................................................. 17

CCircuits and Systems for Security andPrivacy ....................................................................................... 9

Water and Wastewater Conveyance ........................ 24Water and Wastewater Finance andPricing ..................................................................................... 24Water Policy and Planning in a Variable andChanging Climate ............................................................. 24

Planetary Geodesy and Remote Sensing ................. 20Power Management Integrated Circuits ................. 14Power Mechanisms of Rotational and CyclicMotions ..................................................................................... 7

Hydrologic Remote Sensing .......................................... 19

IClimate Change and Water Resources ..................... 17Cold Gas Dynamic Spray .................................................. 2Contaminated Sediments in FreshwaterSystems ................................................................................... 17

Wetland Soils ....................................................................... 24Power Quality Issues ......................................................... 14Practical Guide to the Packaging ofElectronics ................................................................................ 7

Information Photonics .................................................... 11Inspection, Evaluation and Maintenance ofSuspension Bridges .............................................................. 5

Convective Flow and Heat Transfer from WavySurfaces .................................................................................... 3

RInspection, Evaluation and Maintenance ofSuspension Bridges Case Studies ................................... 5Instrumentation ................................................................. 11

Critical Urban Infrastructure Handbook .................... 3Cryogenic Heat Transfer, Second Edition ................... 3

D Radar Hydrology ................................................................ 14Remediation Engineering ............................................... 20Remediation of Heavy Metals in theEnvironment ........................................................................ 20

Integrating Scale in Remote Sensing andGIS ............................................................................................. 19Introduction to RF Power Amplifier Design andSimulation ............................................................................ 11

Decision Sciences ............................................................... 25Dekker Encyclopedia of Nanoscience andNanotechnology, Third Edition, Seven VolumeSet ................................................................................................ 9

Remote Sensing for Sustainability .............................. 21Remote Sensing of Water Resources, Disasters, andUrban Studies ...................................................................... 21J

Design of 3D Integrated Circuits andSystems ................................................................................... 10

Remotely Sensed Data Characterization,Classification, and Accuracies ...................................... 21John Zink Hamworthy Combustion Handbook,

Second Edition, The ............................................................. 8Dipmeter Surveys in Petroleum Exploration ............. 3 Renewable Energy Systems ........................................... 14

LDistrict Cooling ...................................................................... 3Drilling Manual, Fifth Edition, The ................................. 8Dudley's Handbook of Practical Gear Design andManufacture, Third Edition .............................................. 3

Risk Management in Civil Infrastructure .................... 7

SLaser Beam Shaping Applications, SecondEdition ..................................................................................... 12

E Safety and Reliability in the Oil and GasIndustry ................................................................................... 25Science of Renewable Energy, Second Edition,The ............................................................................................ 23

Local Exhaust Ventilation ............................................... 20

MElectric Field Analysis ........................................................ 10Electric Power Distribution Handbook, SecondEdition ..................................................................................... 10

Science, Information, and Policy Interface for EffectiveCoastal and Ocean Management ............................. 21Materials Aspect of Thermoelectricity ....................... 12

Measurement and Safety ............................................... 12Electromagnetic Wave Scattering by Aerial andGround Radar Objects ..................................................... 10

Science, Information, and Policy Interface for EffectiveCoastal and Ocean Management ............................. 21Metal Cutting Theory and Practice, Third

Edition ..................................................................................... 25Electromagnetics for Electrical Machines ............... 10Electromagnetics through the Finite ElementMethod ................................................................................... 10

Sequential Logic and Verilog HDLFundamentals ..................................................................... 15Shallow Foundations ......................................................... 7

Microscale and Nanoscale Heat Transfer .................. 5Modelling Interactions Between Vector-Borne Diseasesand Environment Using GIS .......................................... 20Encyclopedia of Optical and Photonic Engineering,

Second Edition (Print) - Five Volume Set .................. 11Smart Civil Structures .......................................................... 7Soft Errors .............................................................................. 15MRI ........................................................................................... 12

Multi-Stage Flash Desalination ...................................... 6Energy Modeling and Computations in the BuildingEnvelope ................................................................................... 4

Solid-State Radiation Detectors .................................. 15Structural Health Monitoring of Composite StructuresUsing Fiber Optic Methods ............................................ 15

Multihazard Considerations in CivilInfrastructure .......................................................................... 5Multiphase Flow Handbook, SecondEdition ....................................................................................... 5

Energy Resources ................................................................ 18Energy Security and Sustainability ............................. 18Environmental Forensics Fundamentals ................. 18Environmental Systems Analysis withMATLAB® ................................................................................ 18

Synchronous Generators, Second Edition ............... 15

TMultiphysics and Multiscale Modeling ....................... 5

N


INDEX BY TITLE 25


UKwon, Young W. .................................................................... 5

LAAl-Azzawi, Abdul ................................................................... 9Alampalli, Sreenivas ............................................................ 5

Uddameri, Venki ................................................................. 19Uher, Ctirad ........................................................................... 12Lefebvre, Arthur H. ............................................................... 2

Alampalli, Sreenivas ............................................................ 5VLipták, Béla G. .......................................................................... 9

Lipták, Béla G. ....................................................................... 12Logachev, Ivan .................................................................... 20

Altavilla, Claudia ................................................................. 16Alves-Filho, Odilio ................................................................ 4Angelakis, Andreas N. ...................................................... 23 Vepa, Ranjan ............................................................................ 6Luo, Fang Lin ........................................................................... 9Arora, Vijay Kumar ............................................................. 12 Vepraskas, Michael J. ........................................................ 24Lyshevski, Sergey Edward ............................................... 9Autran, Jean-Luc ................................................................ 15 Villaescusa, Ernesto ............................................................. 4

MAwadalla, Salah ................................................................... 15Ayers, John E. ........................................................................ 11

BWWeng, Qihao ......................................................................... 21Wenzhong, Shi .................................................................... 23

MacDonald, Bertrum H. ................................................. 21MacDonald, Bertrum H. ................................................. 21Maev, Roman Gr. ................................................................... 2

Barron, Randall F. .................................................................. 3 Wilson, Donald A. .............................................................. 17Majumdar, Angshul .......................................................... 12Baukal, Jr., Charles E. ............................................................ 8 Woldai, Abraha ....................................................................... 6Marsili-Libelli, Stefano ..................................................... 18Binh, Le Nguyen ................................................................. 13

XMichaelides, Efstathios ...................................................... 5Mikkili, Suresh ....................................................................... 14Miller, Kathleen A. .............................................................. 24

Boden, David R. ................................................................... 18Boldea, Ion ............................................................................. 15Boldea, Ion ............................................................................. 16 Xu, You-Lin ............................................................................... 7Minkowycz, W. J. ................................................................... 6Borrelli, Nicholas F. ............................................................ 14

ZMukerji, Saurabh Kumar ................................................ 10

NBrunner, Paul H. .................................................................. 19

C Zhang, Xinmiao .................................................................. 16

Nakamura, Kenichiro ....................................................... 14Cardoso, José Roberto .................................................... 10

OCavanagh, Joseph ............................................................. 15Chabbi, Abad ....................................................................... 21Chakraverty, S. ........................................................................ 6 Obrien, Eugene J. .................................................................. 2Chakravorti, Sivaji ............................................................... 10 Olama, Alaa A. ......................................................................... 3Chen, Jiaping Paul ............................................................. 20

PCox, Trevor ................................................................................ 2Cushman, John H. ............................................................. 23

D Pandey, Bikash ..................................................................... 19Patil, Madhusadan ............................................................... 3Pazwash, Hormoz .............................................................. 23

Das, Braja M. ............................................................................. 7 Perelmuter, Viktor .............................................................. 14Datta, Asit Kumar ............................................................... 11 Petrisor, Ioana Gloria ........................................................ 18De La Rosa, Francisco C. ................................................ 11 Pullarcot, Sunil ........................................................................ 2Dhillon, B.S. ............................................................................ 25

QDickey, Fred M. .................................................................... 12Dimitrov, Alexander V. ....................................................... 4Duarte, F.J. .............................................................................. 16 Qiao, Qiquan ......................................................................... 13

E Quattrochi, Dale A. ............................................................ 19

REroglu, Abdullah ................................................................. 11Eslamian, Saeid .................................................................... 24 Radzevich, Stephen P. ....................................................... 3Ettouney, Mohammed M. ............................................... 5 Raftelis, George A. ............................................................. 24Ettouney, Mohammed M. ............................................... 7 Raizer, Victor .......................................................................... 17

G Rajan, Ginu ............................................................................. 15Raju, N.V.S. .............................................................................. 11Rebay, Mourad ....................................................................... 5

Gautam, Ravindra Kumar .............................................. 17 Rinklebe, Jörg ....................................................................... 23Goldstein, Walter E. ........................................................... 20 Rumane, Abdul Razzak ................................................... 25

H SHamada, Masanori ............................................................... 3 Sengupta, Raghu Nandan ............................................ 25Hella, Mona M. ..................................................................... 14 Sharma, Rohit ....................................................................... 10Herold, Keith E. ....................................................................... 2 Sheikh, Farhana ..................................................................... 9Hess-Kosa, Kathleen ......................................................... 17 Shenoy, Aroon ........................................................................ 3Hoffman, Craig .................................................................... 11 Sherif, S.A. .................................................................................. 4Hong, Yang ............................................................................ 14 Short, Thomas Allen ......................................................... 10Hong, Yang ............................................................................ 19 Shrestha, Sangam .............................................................. 17

J Shukla, Amritanshu ........................................................... 18Skipka, Kenneth J. .............................................................. 18Spellman, Frank R. ............................................................. 17

Jain, Vijay Kumar ................................................................. 25 Spellman, Frank R. ............................................................. 19Jamnia, Ali ................................................................................. 7 Spellman, Frank R. ............................................................. 23Jiang, Huabei ........................................................................ 13 Spellman, Frank R. ............................................................. 24Jin, Shuanggen ................................................................... 20 Stephenson, David A. ...................................................... 25Johnson, Richard W. ........................................................... 4 Sukharevsky, Oleg I. .......................................................... 10

K Suthersan, Suthan S. ........................................................ 20

TKaushik, Brajesh Kumar .................................................. 13Kaushik, Brajesh Kumar .................................................. 15 Tang, Shuo ................................................................................ 9Kazanskiy, Nikolay L. ......................................................... 13 Taranath, Bungale S. ........................................................... 7Khormi, Hassan M. ............................................................. 20 Thangarajan, M. .................................................................. 18Khosla, Ajit .............................................................................. 13 Thenkabail, Ph.D., Prasad S. ......................................... 21Kirsch, Klaus .............................................................................. 4 Thenkabail, Ph.D., Prasad S. ......................................... 21Klebanov, Boris M. ................................................................ 7 Tomlinson, Michael ............................................................. 6Kok, Kenneth D. ..................................................................... 6 Training Committee Limited, Australian Drilling

Industry ....................................................................................... 8Krishnamoorthy, Sivashankar ..................................... 12


26 INDEX BY AUTHOR

Taylor & Francis Group2 Park Square, Milton Park, Abingdon. Oxon. OX14 4RNTel: 02070176000 • Fax: 02071076699

Engineering Library Reference Promotion

Documents