www.strongbridge.us Strongbridge 900 and 450 elbows are engineered for extreme durability and are manufactured using high-density polyethylene PE4710/100 virgin resin. Our elbows are fully pressure rated for superior performance over fabricated fittings designed with no inner step to impede flow. Offering an extensive range of industrial grade, heavy-duty HDPE molded 900 and 450 elbows. Natural Gas Potable Water Environmental Industrial Waste Water Agricultural Certified to NSF/ANSI 61 AWWA C901/906 Strongbridge wyes meet international and domestic standards certified to NSF/ANSI 61 for potable water and are suitable for water reclamation / irrigation, landfill and industrial use. Quality certificates are available upon request.
4
Embed
Engineered for Durability Built to Last Molded... · B A C D HDPE Molded 450 Elbow: 2” to 12” IPS SDR17 130 PSI* Size (IPS) A B C D Weight (lb) 2” 2.375 0.140 2.52 6.32 0.28
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.strongbridge.us
• High-density polyethylene PE4710/100
• Your best choice for a leak-free system
• High chemical resistance
• Impact resistance at low temperatures
• Resistant to corrosion and abrasion
• Light weight
• Easy installation
• Butt fusion, electrofusion and mechanical connection ready
Engineered for Durability Built to Last u u u u u u u
Strongbridge 900 and 450 elbows are engineered for extreme durability and are manufactured using high-density polyethylene PE4710/100 virgin resin.
Our elbows are fully pressure rated for superior performance over fabricated fittings designed with no inner step to impede flow.
Offering an extensive range of industrial grade, heavy-duty HDPE molded 900 and 450 elbows.
Natural Gas Potable WaterEnvironmentalIndustrial Waste WaterAgricultural
Certified toNSF/ANSI 61
AWWA C901/906
Strongbridge wyes meet international and domestic standards certified to NSF/ANSI 61 for potable water and are suitable for water reclamation / irrigation, landfill and industrial use. Quality certificates are available upon request.
www.strongbridge.us
HDPE Molded 900 Elbow: 2” to 12” IPS SDR17 130 PSI* Size (IPS) A B C D Weight
To learn more about how Strongbridge can help, contact us by phone, email or visit our website to check out our products and services.
www.strongbridge.us
Strongbridge International LLC is not responsible for error or omissions in the content of this document. The information in this document is for reference purposes only and is not to be relied upon or substitute engineering documentation. All information is provided “as is”, with no guarantee of completeness or accuracy and is subject to change without notice.