Energy Notes ch09 - Vale Middle School · • Thermal Energy kinetic energy due to motion of particles ... •All matter is made up of particles that are always in random motion.

1

Energy and Energy Resources

Table of Contents

Section 1 What Is Energy?

Section 2 Energy Conversions

Section 3 Conservation of Energy

Section 4 Energy Resources

Chapter 9 Section 1 What Is Energy?

Objectives

• Explain the relationship between energy and work.

• Compare kinetic energy and potential energy.

• Describe the different forms of energy.

Chapter 9


Energy and Work: Working Together

• Energy is the ability to do work.

•Work is a transfer of energy.

• Energy and work are expressed in units of joules (J).

Chapter 9 Section 1 What Is Energy?Chapter 9

2


Kinetic Energy

• Kinetic energy is the energy of motion.

Chapter 9

kinetic energy mv 2

2


Kinetic Energy

Chapter 9

Click below to watch the Visual Concept.

You may stop the video at any time by pressing the Esc key.

Visual Concept

Section 1 What Is Energy?Chapter 9

• Calculate the kinetic energy of a 1500 Kg car moving at the following speeds:

– 30 m/s

– 15 m/s

• A 5 Kg cat has a velocity of 2m/s while running across the road. What was the cat’s kinetic energy?

3


Potential Energy

• Potential energy-- energy because of its position.

•Rock on a cliff•Stretched rubber band•Food•gasoline

Chapter 9 Section 1 What Is Energy?

Potential Energy, continued

• Gravitational Potential Energy depends on its weight and its height

gravitational potential energy weight height

• GPE is equal to the amount of work done on an object to lift it a certain height.

Chapter 9

Section 1 What Is Energy?Chapter 9 Calculate the gravitational potential energy of the following:– a car with a mass of 1200kg at the top of a

45m hill

– a 55 kg climber on top of Mt. Everest (8800 m height)

– a 1.25 kg red tailed hawk soaring at an altitude of 300m

4


Potential Energy, continued

• Height Above What? When you find out an object’s gravitational potential energy, the “ground”that you measure the object’s height from depends on where it is.

• The height you use in calculating gravitational potential energy is a measure of how far an object has to fall.

Chapter 9

FYI


Mechanical Energy

• Mechanical energy is the total of kinetic energy and potential energy

•The equation to find mechanical energy is:

mechanical energy potential energy kinetic energy

Chapter 9


Mechanical Energy, continued

• The mechanical energy of an object remains the same unless it transfers some energy to another object.

• But even if the mechanical energy of an object stays the same, the potential energy or kinetic energy can increase or decrease.

Chapter 9

FYI


Other Forms of Energy• Thermal Energy kinetic energy due to motion of particles

•Thermal energy increases as temperature increases and increases as the number of particles increases

•All matter is made up of particles that are always in random motion. So, all matter has thermal energy.

Chapter 9

FYI

5

Section 1 What Is Energy?Chapter 9 Section 1 What Is Energy?

• Chemical Energy stored in the bonds between atoms

• The energy in food is chemical energy.

•energy of a chemical compound that changes as atoms are rearranged.

•Chemical energy is a form of potential energy because it depends on the position and arrangement of the atoms in a compound.

Chapter 9

FYI


Other Forms of Energy, continued

• Electrical Energy is the energy of moving electrons.

• Sound Energy is caused by an object’s vibrations.

•Electrical energy can be thought of as potential energy that is used when you plug in an electrical appliance and use it.

•Sound--The object’s vibrations transmit some kinetic energy to the air particles, which also vibrate. These vibrations transmitsound energy.

Chapter 9

FYI


Other Forms of Energy, continued

• Light Energy- produced by the vibrations of electrically charged particles.

• Nuclear Energy -Stored within the atom’s nucleus

•Nuclear Energy is energy that comes from changes in the nucleus of an atom. Nuclear energy can be produced when nuclei are joined in a fusion reaction or when a nucleus is split apart in a fission reaction.

Chapter 9

FYI

6


Bellringer

What do the following a plant, a Bunsen burner, and a pendulum have in common? What are three other objects that have same common link?

Write your answers in your science journal.

Chapter 9

7


Objectives

• Describe an energy conversion.

• Give examples of energy conversions for the different forms of energy.

• Explain how energy conversions make energy useful.

• Explain the role of machines in energy conversions.

Chapter 9 Section 2 Energy Conversions

Kinetic Energy and Potential Energy

• An energy conversion is a change from one form of energy to another. Any form of energy can change into any other form of energy.

• As the skateboarder on the next slide travels up and down the half-pipe, his energy changes back and forth between kinetic energy and potential energy.

Chapter 9

Section 2 Energy ConversionsChapter 9 Section 2 Energy Conversions

Kinetic Energy and Potential Energy,continued

• Elastic Potential Energy Stretching a rubber band stores elastic potential energy in the rubber band.

• When you let the rubber band go, it goes back to its original shape. It releases its stored-up potential energy as it does so.

Chapter 9

8


Conversions Involving Chemical Energy

• Chemical energy is stored in the food you eat. Your body uses this chemical energy to function.

• Energy Conversion in Plants The chemical energy in the food you eat comes from the sun’s energy. Plants use photosynthesis to convert light energy into chemical energy, as shown on the next slide.

Chapter 9 Section 2 Energy ConversionsChapter 9


Conversions Involving Chemical Energy,continued

• The Process Continues Plants change light energy into chemical energy. The chemical energy in the food you eat is changed into another kind of chemical energy that your body can use.

• Your body then uses that energy to give you kinetic energy that you use in everything you do.

Chapter 9 Section 2 Energy Conversions

Why Energy Conversions Are Important

• Energy conversions are needed for everything we do. Heating our homes, getting energy from a meal, and many other things use energy conversions.

• Machines, such as a hair dryer, help harness energy and make that energy work for you.

Chapter 9

9


Why Energy Conversions Are Important,continued

• Conversions Involving Electrical Energy Some common energy conversions that involve electrical energy are shown in the table below.

Chapter 9

electrical energy kinetic and sound energyBlender

electrical energy light and thermal energyLight bulb

chemical energy electrical energyBattery

electrical energy light and sound energyAlarm clock


Energy and Machines

• A machine can make work easier by changing the size or direction (or both) of the force needed to do the work. Some machines allow you to use less force over a greater distance to do the same amount of work.

• Machines as Energy Converters Some machines help you use energy by converting it into the form of energy that you need.

Chapter 9

Section 2 Energy ConversionsChapter 9 Section 3 Conservation of Energy

Bellringer

Answer the following questions:

Where does the energy that makes a roller coaster car move come from? Where does the energy go?

What does “All of the energy put into a process still exists somewhere when the process has ended”mean?

Write your answers in your science journal.

Chapter 9

10


Objectives

• Explain how energy is conserved within a closed system.

• Explain the law of conservation of energy.

• Give examples of how thermal energy is always a result of energy conversion.

• Explain why perpetual motion is impossible.

Chapter 9 Section 3 Conservation of Energy

Where Does the Energy Go?

• Friction is a force that oppose motion between two surfaces that are touching.

• For a roller coaster car to move, energy must be used to overcome the friction between the car’s wheels and the track.

• As a result, not all of the car’s potential energy changes into kinetic energy and not all of the car’s kinetic energy changes back into potential energy.

Chapter 9

Section 3 Conservation of EnergyChapter 9 Section 3 Conservation of Energy

Energy Is Conserved Within a Closed System

• A closed system is a group of objects that transfer energy only to each other.

• The Law of Conservation of Energy states that energy cannot be created or destroyed.

• Energy can be converted from one form to another. But all of the different forms of energy in a system always add up to the same total amount of energy.

Chapter 9

11


Energy Is Conserved Within a Closed System,continued

• The image below shows energy conservation in a light bulb.


No Conversion Without Thermal Energy

• Any time one form of energy is converted into another form, some of the original energy always gets converted into thermal energy.

• The thermal energy due to friction that results from energy conversions is not usually useful energy.

Chapter 9


No Conversion Without Thermal Energy,continued

• Perpetual Motion? No Way! A perpetual motion machine is a machine that would run forever without any additional energy.

• But perpetual motion machines are impossible because some waste thermal energy always results from energy conversions.


No Conversion Without Thermal Energy,continued

• Making Conversions Efficient Some systems transform energy with less loss of heat than others do. Such systems are more efficient than others are.

• Improving the efficiency of machines is important because greater efficiency results in less waste. If less energy is wasted, less energy is needed to operate a machine.

Chapter 9

12


Bellringer

Predict whether the following sources of energy are renewable or nonrenewable.

sunlight coal windpetroleum nuclear geothermal

Write and explain your predictions in your science journal.

Chapter 9 Section 4 Energy Resources

Objectives

• Name several energy resources.

• Explain how the sun is the source of most energy on Earth.

• Evaluate the advantages and disadvantages of using various energy resources.

Chapter 9


Nonrenewable Resources

• Nonrenewable resources cannot be replaced or are replaced much more slowly than they are used.

• Fossil fuels are nonrenewable energy resources that formed from the remains of organisms that lived long ago. Oil, natural gas, and coal are the most common fossil fuels.

Chapter 9 Section 4 Energy ResourcesChapter 9

13


Nonrenewable Resources, continued

• Uses of Fossil Fuels All fossil fuels contain stored energy from the sun, which can be converted into other kinds of energy.

• Burning coal is a common way to generate electrical energy. Petroleum is used to make gasoline, wax, and plastics. Natural gas is often used in home heating.



• Electrical Energy from Fossil Fuels Electric generators convert the chemical energy in fossil fuels into electrical energy by the process shown below.

Chapter 9



• Nuclear Energy Another way to generate electrical energy is to use nuclear energy.

• In a process called nuclear fission, the nucleus of a radioactive atom is split into two smaller nuclei, which releases nuclear energy.

• Because the supply of radioactive elements is limited, nuclear energy is a nonrenewable resource.


Renewable Resources

• Renewable resources are naturally replaced more quickly than they are used.

• Solar Energy Sunlight can be changed into electrical energy through solar cells.

• Solar cells can be used in devices such as calculators. They can also be placed on the roof of a house to provide electrical energy.

Chapter 9

14


Renewable Resources, continued

• Energy from Water The potential energy of water in a reservoir can be changed into kinetic energy as the water flows through a dam.

• In a hydroelectric dam, falling water turns turbines. The turbines are connected to a generator that changes kinetic energy into electrical energy.

Chapter 9



• Wind Energy The kinetic energy of wind can turn the blades of a windmill or a wind turbine.

• A wind turbine changes the kinetic energy of the air into electrical energy by turning a generator.



• Geothermal Energy is thermal energy caused by the heating of Earth’s crust. This energy can be converted into electrical energy at geothermal power plants.

• Biomass is organic matter, such as plants, wood, and waste, that can be burned to release energy. Some countries depend on biomass for energy.

Chapter 9

15


The Two Sides to Energy Resources

• All energy resources have advantages and disadvantages. Many factors determine when one energy source is a better choice than another.

• Choosing the Right Energy Source Energy planning in all parts of the world requires careful consideration of energy needs and the availability and responsible use of resources.

Chapter 9

Energy Notes ch09 - Vale Middle School · • Thermal Energy kinetic energy due to motion of particles ... •All matter is made up of particles that are always in random motion.

Documents