This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Contact a Mouser Service Represesentative for a custom design solution
This product is RoHS compliant.
Plas
tic B
oxes
Bud
1716
BUD Hand Held Plastic Enclosures
GRABBERS HAND HELD BOXES Style A:• Available with/without 2.84" x 1.38" LCD cut-out in the display area• Has a 9V/AA battery compartment
mouser.com/bud
Style B:• Available with/without 4.00" x 1.75" LCD cut-out in the display area.• Available with/without a 9V/AA battery compartment
Style F:• Pocket-sized with molded-in ring suitable for key ring applications
Style C:• Rectangular with 9 V AA battery compartment, removable end panel• Made of high impact ABS plastic, black
Style G:• Available with/without a 2.84" x 2.03" LCD cutout in the display area• Available with/without a 9V/AA battery compartment• Wall mounting plate/tilt stand included
Style H:• Built-in clear LED light pipe for status monitoringStyle I:• Mar resistant textured surface with PCB mounting bossesStyle J:• Compact, ergonomic design• Integral battery compartment, 4AA batteries.• Internal PCB mounting bosses• Recessed top suitable for label or keypad
Style K:• Includes battery compartment and battery contacts• Flushed textures top• Made with flame retardant, high impact ABS plastic
Style L:• Available with/without battery compartment• Made of high impact ABS plastic• Designed with ribbed rounded sides that provides a secure and comfortable grasp
Style M:• Has extra deep pocket on one end that helps provide a better view• Made of high impact ABS plastic
Accessories
Style N:• Available with/without battery compartment• Designed with ribbed round sides that provides a secure and comfortable grasp• Made with flame retardant, high impact ABS plastic
Style O:• Available with/without battery compartment• “T” and rectangular shaped providing more room for internal components• Designed with soft ribbed rounded sides that provide secure and comfortable grasp• Made with high impact, resistant, black or gray, ABS plastic• Recessed top suitable for label of keypad• Contact kits are included
For quantities greater than listed, call for quote.MOUSER
StOCK NO.Bud
Part No. Fig. Style Color LCD Cut-out Battery Compartment Buttons Flammability
RatingDimensions: in.
H x W x DPrice Each
1 5 10 25563-HH-3400-BC HH-3400-BC A A Gray No Yes No UL94V-0 7.09 x 3.94 x 1.57 16,90 16,06 15,79 15,26563-HH-3401-BC HH-3401-BC A A Gray Yes Yes No UL94V-0 7.09 x 3.94 x 1.57 16,68 15,84 15,57 15,05563-HH3420 HH-3420 B B Gray No No No UL94V-0 9.33 x 5.16 x 1.71 19,05 18,10 17,79 17,19563-HH-3420-BC HH-3420-BC B B Gray No Yes No UL94V-0 9.33 x 5.16 x 1.71 21,98 20,88 20,53 19,83563-HH-3421 HH-3421 B B Gray Yes No No UL94V-0 9.33 x 5.16 x 1.71 17,59 16,71 16,43 15,88563-HH-3421-BC HH-3421-BC B B Gray Yes Yes No UL94V-0 9.33 x 5.16 x 1.71 18,54 17,62 17,32 16,73563-HH-3524 HH-3524 C K Black No Yes No UL94V-0 4.63 x 2.85 x 1.00 10,82 10,28 10,10 9,76563-HH-3535 HH-3535 C K Black No Yes No UL94V-0 5.50 x 3.25 x 1.00 12,14 11,54 11,34 10,96563-HH-3430-BCB HH-3430-BCB D C Black No Yes No UL94V-0 5.31 x 2.76 x .94 6,07 5,77 5,62 5,48563-HH-3430-BCG HH-3430-BCG D C Gray No Yes No UL94V-0 5.31 x 2.76 x .95 6,07 5,77 5,62 5,48563-HH-3431-BCB HH-3431-BCB D C Black No Yes No UL94V-0 4.13 x 2.95 x 1.04 6,84 6,50 6,33 6,17563-HH-3431-BCG HH-3431-BCG D C Gray No Yes No UL94V-0 4.13 x 2.95 x 1.05 6,84 6,50 6,33 6,17563-HH-3492 HH-3492 E F Gray No No 2 UL94-HB 2.23 x 1.29 x .45 5,51 5,24 5,11 4,98563-HH-3496-B HH-3496-B B G Black No No No UL94V-0 8.27 x 4.33 x 1.59 17,78 16,89 16,61 16,05563-HH-3496-G HH-3496-G B G Gray No No No UL94V-0 8.27 x 4.33 x 1.59 17,78 16,89 16,61 16,05563-HH-3497-BC-B HH-3497-BC-B B G Black No Yes No UL94V-0 8.27 x 4.33 x 1.59 13,61 11,34 10,78 10,23563-HH-3497-BC-G HH-3497-BC-G B G Gray No Yes No UL94V-0 8.27 x 4.33 x 1.59 13,61 11,34 10,78 10,23563-HH-3499-BC-B HH-3499-BC-B B G Black Yes Yes No UL94V-0 8.27 x 4.33 x 1.59 13,61 11,34 10,21 10,15563-HH-3499-BC-G HH-3499-BC-G B G Gray Yes Yes No UL94V-0 8.27 x 4.33 x 1.59 13,61 11,34 10,21 10,15563-HH-3502 HH-3502 F H Black No No 2 UL94-HB 2.72 x 1.84 x 1.25 5,51 5,24 5,11 4,98563-HH-3550 HH-3550 G I Black No No No UL94-5VA 4.5 x 4.5 x 1.5 7,67 7,02 6,39 6,21563-HH-3570-B HH-3570-B H J Black No Yes No UL94-HB 7.15 x 2.56 x 1.09 6,02 5,03 4,79 4,54563-HH-3570-G HH-3570-G H J Gray No Yes No UL94-HB 7.15 x 2.56 x 1.09 6,02 5,03 4,79 4,54563-HH-3580-B HH-3580-B I L Black No No No UL94V-0 5.71 x 2.20 x 1.26 7,84 7,45 7,32 7,08563-HH-3580-BCB HH-3580-BCB I L Black No Yes No UL94V-0 5.71 x 2.20 x 1.26 9,06 8,61 8,46 8,17563-HH-3600-B HH-3600-B J M Black No No No UL94V-0 5.98 x 3.26 x 1.31 8,17 7,76 7,56 7,37563-HH-3610-B HH-3610-B K N Black No No No UL94V-0 6.69 x 5.16 x 1.38 8,94 8,49 8,35 8,07563-HH-3610-BCB HH-3610-BCB K N Black No Yes No UL94V-0 6.69 x 5.16 x 1.38 10,15 9,65 9,40 9,16563-HH-3510-B HH-3510-B L O Black No No No UL94V-0 6.28 x 3.69 x .90 10,82 10,28 10,02 9,76563-HH-3510-G HH-3510-G L O Gray No No No UL94V-0 6.28 x 3.69 x .90 10,82 10,28 10,02 9,76563-HH-3510-BCB HH-3510-BCB L O Black No Yes No UL94V-0 6.28 x 3.69 x .90 11,60 11,02 10,74 10,47563-HH-3510-BCG HH-3510-BCG L O Gray No Yes No UL94V-0 6.28 x 3.69 x .90 11,60 11,02 10,74 10,47
For quantities greater than listed, call for quote.MOUSER
StOCK NO.Bud
Part No. Fig. Description Color Material Leads Size/Capacity Price Each1 5 10 25
563-HH-3442-C HH-3442-C - AA Contact Kit - - - - 0,48 0,363 0,351 0,338563-HH-3449 HH-3449 A 9V Battery Clip Black Flexible Vinyl 6" Long One 9V 0,99 0,825 0,784 0,743563-HH-3634 HH-3634 B 9V Battery Holder Black Polypropylene Plastic - One 9V 2,65 2,51 2,45 2,39563-HH-3630 HH-3630 C (2) AAA Battery Holder Black Polypropylene Plastic 6" Long Two AAA 1,88 1,78 1,75 1,69563-HH-3631 HH-3631 D (4) AAA Battery Holder Black Polypropylene Plastic 6" Long Four AAA 3,20 3,04 2,99 2,89563-HH-3632 HH-3632 C (2) AA Battery Holder Black Polypropylene Plastic 6" Long Two AA 1,88 1,78 1,73 1,69563-HH-3633 HH-3633 E (4) AA Battery Holder Black Polypropylene Plastic 6" Long Four AA 3,20 3,04 2,99 2,89
High impact Polystyrene with UL94-HB flammability rating. Comes with close-fitting interlocking lid and assembly hardware. Provisions for mounting horizontal PCB. Finish: Black
Style "D"
Style "A"
ABS plastic with flammability rating of UL94-HB and suggested service temperature of -40°C to +80°C. Internal PCB card guides accept both horizontal and vertical boards. Comes with grid pattern on underside of cover for modification reference points. Finish: Black
ABS plastic with UL94V-0 flammability rating. Suggested service temperature of -20°C to +60°C. Comes with close fitting interlocking lid and assembly hardware. Horizontal PCB mounting bosses.Finish: Textured Black
Style "G"
Style "J"
mouser.com/bud
DIN rail mountable screw together electronic enclosure. Made from flame retardant black ABS plastic with UL94-5VA flammability rating. Versatile clip snaps into DIN rail or may be screwed down for panel/wall mount. 4 PCB mounting bosses in base.Finish: Textured Matte Black
Style "K"
Style "l"
ABS Plastic with flammability rating of 94V-5VA and suggested service temperature of -20°C to +60°C. Comes with close fitting interlocking lid and assembly hardware. Available with either a flush textured cover, or with a smooth recessed area suitable for labels or keypads. Finish: Textured Black
• ABS plastic, UL94-HB flammability rating• Three versions available: Version 1 - press-fit cover, and molded-in wire entry points Version 2 - screwed-on cover, molded-in wire entry points, and recessed area on cover for decal Version 3 - snap-fit cover, and wire entry port• Molded-in external wall/panel mounting tabs• Finish: Black
• Flame retardant ABS plastic with UL94V-0 flammability rating. Suggested service temperature -20°C to +70°C.• Comes with close fitting interlocking screw-on and assembly hardware.• Horizontal PCB mounting bosses.• Molded-in mounting brackets are provided on catalog numbers having -MB suffix.• Finish: Fine Textured Black - well suited for silk-screening or pad printing. Special colors available on request.
DIN RAIl MoUNt BoxES
DIN RAIl MoUNt PlAStIBox
Durable UL94V-0 rated ABS plastic housing. External clamp type contacts have M3 screws and lock washers. Internal solder tab contacts. All contacts are tin plated brass and have a 10Amp rating. Internal horizontal and vertical PCB card guides. Screw attached front covers with recessed area for labels. Fits standard DIN rail.Finish: Light Gray
• ABS/PC blended plastic with UL94-5VA flammability rating
mouser.com/bud
NBA Series
CABLE GLANDSRequired to maintain NEMA 4X rating when cables enter or exit a NEMA 4 or 4X type enclosure. Assembly consisting of Black molded nylon body, hex nut, and cable nut and with a rubber gasket and cable seal. Nylon material has UL94V-2 flammability rating and -40°C to 100°C suggested service temperature.
• Indoor Series: ABS/PC blended plastic enclosures: molded light gray material with UL94-5VA flammability rating
• Outdoor Series: PC/PBT blended plastic enclosures: molded Light Gray material with UL94-5VA flammability rating/ UV stabilized
NBB Series
NBD Series
• Indoor Series: ABS/PC blended plastic enclosures: molded from gray material with UL94-5VA flammability rating
• Outdoor Series: PC/PBT blended plastic enclosures: molded from light gray material with UL94-5VA flammability rating & UV stabilized
• Designed to IP65 of IEC529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications • Hardware and accessories are available
Contact a Mouser Service Representative for a custom design solution
E194432
D W
H
Plastic Boxes
Bud
1719
BUD NEMA Polycarbonate & ABS Enclosures
PLASTIBOX™
PS: Textured body with smooth top insert for silk screening capabilityPT: Textured body with textured topPBS: Textured body with smooth top insert and 9V battery compartment
Style A:• Has squared corners, provisions for mounting horizontal and vertical PCBs, and four non-skid feet• UL94-HB flammability rating• Temperature rating: -40°C to +60°C• Available in Black or Gray
A
Contact a Mouser Service Representative for custom modification.
mouser.com/bud
Style I:• Unique, contemporary styling with rounded corners and edges• Durable, self-extinguishing, ABS plastic material with UL94-5VA flammability rating• Mar resistant textured surface• Internal PCB mounting bosses• Base is securely attached to the cover with four color matched screws• PT-11754-DW features a display window• Color: Black
Style J:• Designed to meet NEMA 4X and IP65 Specifications• Easily removable cover screws into threaded brass inserts in base• Molded in flanges allow easy wall or panel mounting without having to open enclosure• 8 PCB mounting bosses in base• PT-11801 has an additional 6 inside elevated cover• Color: Textured Matte Black
Polycarbonate & high-impact ABS molded enclosures that meet NEMA 4X specifications, are ideal for PCB enclosures, junction boxes, & other applications in the electrical & electronic industry.
NEMA 1, 2, 4, 4X, 12 & 13, UL508 POLYCARBONATE AND ABS ENCLOSURES
• Light Gray polycarbonate body and cover• Body/Cover - UV stabilized, UL94-2 flammability rating• Suggested service temperature: -40°C to 120°C
Style 1• Light Gray polycarbonate body and clear polycarbonate cover• Body/Cover - UV stabilized, UL94-2 flammability rating• Suggested service temperature: -40°C to 120°C
Style 2• Dark Gray ABS body and cover• Body/Cover - UL94-HB flammability rating• Suggested service temperature: 40°C to 80°C
Style 3• Transparent Blue body and cover• Body/Cover - UL94V2 flammability rating• UV stabilized Polycarbonate plastic• Suitable for wet, dry and/or corrosive environments
Style K:• Time saving, hinged, snap closed cover that is easily opened by hand• Rubber inserts are easily cut to allow cable entry ports• Durable, self-extinguishing, ABS plastic material with UL94-HB flammability rating• Mark-resistant textured surface• Internal PCB mounting bosses• Available in Black or Gray
B C D E
Style L:• 2 piece, screw together desktop enclosure with sloping cover• Durable, self-extinguishing, ABS plastic material with UL94-H flammability rating• Mark-resistant textured surface• Internal PCB mounting bosses• Available in Bone Gray
For quantities greater than listed, call for quote.MOUSER
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Bud
Part No. Fig. Color Style Outside Dimensions: in. H x W x D
Price Each1 5 10 25
563-PT-11308-B PT-11308-B A Black A 3.62 x 2.25 x 1.50 7,40 7,03 6,85 6,67563-PT-11308-G PT-11308-G A Gray A 3.62 x 2.25 x 1.50 7,40 7,03 6,85 6,67563-PBS-11327-B PBS-11327-B A Black A 5.62 x 3.25 x 1.50 12,48 11,86 11,56 11,26563-PBS-11327-G PBS-11327-G A Gray A 5.62 x 3.25 x 1.50 10,56 8,83 8,39 8,38563-PT-11372-B PT-11372-B A Black A 3.62 x 2.25 x 2.50 8,94 8,49 8,28 8,07563-PT-11372-G PT-11372-G A Gray A 3.62 x 2.25 x 2.50 8,94 8,49 8,35 8,07563-PT-11388-B PT-11388-B A Black A 5.62 x 3.25 x 2.48 11,48 10,91 10,63 10,36563-PT-11388-G PT-11388-G A Gray A 5.62 x 3.25 x 2.48 8,15 7,75 7,37 7,01563-PTH-11810-B PTH-11810-B B Black K 3.58 x 3.11 x 1.77 4,29 3,58 3,41 3,24563-PTH-11810-G PTH-11810-G B Gray K 3.58 x 3.11 x 1.77 4,29 3,58 3,41 3,24563-PTH-11811-B PTH-11811-B B Black K 3.58 x 3.80 x 1.77 6,27 5,24 4,98 4,74563-PTH-11811-G PTH-11811-G B Gray K 3.58 x 3.80 x 1.77 6,27 5,24 4,98 4,74563-PT-11820 PT-11820 C Gray L 7.40 x 5.24 x 2.22 10,31 8,61 8,20 7,79563-PT-11743 PT-11743 D Black I 3.00 x 4.00 x 1.38 6,19 5,16 4,83 4,61563-PT-11754 PT-11754 D Black I 4.00 x 5.50 x 1.38 10,94 10,39 10,13 9,87563-PT-11754-DW PT-11754-DW D Black I 4.00 x 5.50 x 1.38 10,94 10,39 10,21 9,87563-PT-11785 PT-11785 D Black I 5.00 x 7.50 x 1.75 14,58 13,85 13,62 13,16563-PT-11785-MP PT-11785-MP D Black I 5.00x7.50x1.75 13,36 12,69 12,37 12,06563-PT-11800 PT-11800 E Black J 8.25 x 5.00 x 3.00 23,53 22,36 21,80 21,24563-PT-11801 PT-11801 E Black J 8.25 x 5.00 x 4.33 24,75 23,51 22,92 22,34
BUD Potting Boxes and Plastic EnclosuresPLASTICASE™
• UL94-HB flammability rating• Impact resistant Polystyrene• Molded-in card guides and mounting bosses• Comes complete with stainless steel screws and rubber feet• Finish: Double-Textured PC Bone Gray
This line of molded enclosures is ideally suited for instrumentation and telecom equipment from hand held to desk top sizes. Available in twelve sizes and two versions.
Version #1 - Dark Gray ABS covers with Light Gray ABS end panels. UL94V-0 flammability rating, suggested service temperature -40°C to 80°C.
Version #2 - Light Gray ABS covers with Dark Gray ABS end panels. UL94-HB flammability rating, suggested service temperature -40°C to 80°C.
PI SErIES
Design Features:• Designed to IP 54 of IEC 529• Two part design with tongue and groove joint between top and bottom covers and specially designed end panels• Internal guide slots provide for vertical mounting of PCBs• Internal bosses provided for horizontal mounting of PCBs• Top and bottom covers are lightly textured providing a scratch-resistant high quality finish• Four screws are countersunk in the bottom cover and threaded into internal bosses which secure the top cover and end panels; contact a Mouser Service Representative for custom modifications
mouser.com/bud
POTTING BOXES AND COVErS
No Flange Top FlangeStyle "B" Bottom FlangeStyle "C"
Available in 3 styles and a variety of sizes, these low cost enclosures are made of tough, lightweight ABS thermoplastic.
Flammability rating: UL94V-0Suggested service temperature: 20°C to +70°COptional close-fitting covers are available in all sizes
B
C D
Contact a Mouser Service Representativefor custom modification.
Common Specifications:• Ideally suited for mounting printed circuit boards or DIN rail mounted components• Color is light gray (RAL 7035)• Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water• Gasket is factory poured using high temperature UL listed - silicon gasket material
• Designed to meet IP 66 & NEMA 4, 4X, 12 & 13 ratings• Lid is secured with self captivating - M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)• All stainless steel hardware to avoid corrosion caused by dissimilar metals
WAtErtigHt ABS PlAStic ENclOSurES WitH FlAt liDSpecifications:• Material: General purpose ABS plastic (material carriesaULflammabilityratingofUL94-HB)• Not recommended for outdoor use (please see the polycarbonate 1554 series)• Internal DIN rail mounting tabs: molded in all (except 1554CGY)• Vertical P.C. card guides (for 1.5mm thick P.C. boards) are molded in all but the smallest size enclosure (1554BGY)
WAtErtigHt POlycArBONAtEENclOSurES WitH FlAt liDSpecifications:• Material: Polycarbonate (material carries a UL flammabilityratingofUL94-5V• Recommended for outdoor use• Internal DIN rail mounting tabs: molded in all (except 1554C2GY)• Vertical P.C. card guides (for 1.5mm thick P.C. boards) are molded in all but the smallest size enclosure (1554B2GY)
WAtErtigHt POlycArBONAtEENclOSurES WitH clEAr liDSpecifications:• Clear polycarbonate lid allows for maximum visibility of protected internal components. • Material-Polycarbonate(materialcarriesaULflammability ratingofUL94-5V).• Recommended for outdoor use.• Internal DIN rail mounting tabs: molded in all (except 1554C2GYCL)• Vertical P.C. card guides (for 1.5mm thick P.C. boards) are molded in all but the smallest size enclosure (1554B2GYCL).
WAtErtigHt ABS PlASticENclOSurES WitH “StylED” liDSpecifications:• “Styled”lidversionhasthreemainadvantagesovertheflatlid (1554 series): Smooth recessed surface on lid for a membrane keypad or label; standoffs molded in the interior of the lid (except for 1555BGY) - designed for #6 self tapping screws; and more modern“styled”lookvs.ourtraditionalflatlid(1554series)• Material: General purpose ABS plastic (materialcarriesaULflammabilityratingofUL94-HB)• Not recommended for outdoor use (please see the polycarbonate 1555 series)• Internal DIN rail mounting tabs: molded in all (except 1555CGY)• Vertical P.C. card guides (for 1.5mm thick P.C. boards) are molded in all but the smallest size enclosure (1555BGY)
WAtErtigHt POlycArBONAtEENclOSurES WitH “StylED” liDSpecifications:• “Styled”lidversionhasthreemainadvantagesovertheflatlid (1554 series): Smooth recessed surface on lid for a membrane keypad or label; standoffs molded in the interior of the lid (except for1555BGY);moremodern“styled”lookvs.ourtraditionalflatlid (1554 series)• Material: Polycarbonate (material carries a UL flammabilityratingofUL94-5V)• Recommended for outdoor use.• Internal DIN rail mounting tabs: molded in all (except 1555C2GY)• Vertical P.C. card guides (for 1.5mm thick P.C. boards) are molded in all but the smallest size enclosure (1555B2GY).
PANElS FOr WAtErtigHt ENclOSurES & HEAvy Duty 16 gAugE gAlvANizED StEEl PANElSSpecifications:• Heavydutypanelsformountingcomponents• Galvanized 14/16 gauge steel• Includes mounting hardware for enclosure body (lid mounting of panel requires optional #6 self tapping screws)
Series Size printed in BOlD in Hammond Part Number*
HAMMOND Hand Held & Heavy Duty Plastic EnclosuresA
B
C
D
HAMMOND MINIATURE HAND HELD PLASTIC ENCLOSURES
Replace the __ with BK for Black or GY for Gray or TBU for Translucent Blue
With Key Ring Kit
mouser.com/hammond
• Ideally suited for mounting small printed circuit boards or as potting boxes• Designed to meet IP54
HAMMOND MINIATURE FLANGED LID PLASTIC ENCLOSURES
Replace the __ with BK for Black or GY for Gray
• Ideally suited for mounting small printed circuit boards or as potting boxes• Flanged lid is perfect for wall or shelf mounting or suspending with a tie wrap• Designed to meet IP54
HAMMOND HEAVY DUTY THICK WALL RFI CONDUCTIVE PLASTIC ENCLOSURES
• Designed for EMI/RFI shielding applications• Heavy duty, thick wall design with an average wall thickness of .13"• Flammability rating: UL94V-0• Designed to meet IP54
HAMMOND RFI - HAND HELD CONDUCTIVE PLASTIC ENCLOSURES
• Designed for EMI/RFI shielding applications• Flammability rating: UL94V-0• Designed to meet IP54
• Complete with top & bottom, removable front panel, battery door (except on the smallest size) and three self-tapping screws• Toppanelhasaflatdisplayarea,perfectforlabels,silkscreening, membranekeypadsoreasilymachined• Lap joint construction provides protection against access of dust and splashing water• Battery compartment (except on the smallest size) suitable for either a 9V (PP3) or 2 x AA batteries• The base is molded with bosses for easy P.C. board mounting
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Enclosure
Color
SoftSideColor
Batt. Door
Dimensions: in. Price EachMfr. Mfr. Part No. L W H 1 5 10 25546-1553AABK A Black Gray No 2.95 1.97 .67 3,46 3,29 3,14 3,01546-1553AAGY A Gray Gray No 2.95 1.97 .67 3,46 3,29 3,14 3,01546-1553ABK A Black Black No 3.93 1.90 .669 4,74 4,36 4,03 3,75546-1553AGY A Gray Gray No 3.93 1.90 .669 4,74 4,36 4,03 3,75546-1553BBK A Black Gray No 4.62 3.11 .95 5,97 5,32 4,90 4,55546-1553BGY A Gray Gray No 4.62 3.11 .95 5,97 5,32 4,90 4,55546-1553BBKBK A Black Black No 4.62 3.11 .95 5,97 5,32 4,90 4,55546-1553BTBUBK A TransBlue Black No 4.62 3.11 .95 5,97 5,32 4,90 4,55546-1553BRDBK A Red Black No 4.62 3.11 .95 5,97 5,34 4,97 4,67546-1553BYLBK A Yellow Black No 4.62 3.11 .95 5,97 5,32 4,90 4,55546-1553DBK A Black Gray No 5.80 3.50 .98 6,41 5,72 5,26 4,88546-1553DGY A Gray Gray No 5.80 3.50 .98 6,42 5,73 5,35 5,02546-1553DBKBK A Black Black No 5.80 3.50 .98 6,42 5,72 5,26 4,88546-1553DTBUBK A TransBlue Black No 5.80 3.50 .98 6,42 5,72 5,26 4,88546-1553DRDBK A Red Black No 5.80 3.50 .98 6,42 5,72 5,26 4,88546-1553DYLBK A Yellow Black No 5.80 3.50 .98 6,42 5,72 5,26 4,88546-1553CBK A Black Gray Yes 3.93 2.40 .67 5,26 5,02 4,77 4,58546-1553CGY A Gray Gray Yes 3.93 2.40 .67 5,26 5,02 4,77 4,58546-1553CBKBAT A Black Gray Yes 4.61 3.11 1.26 7,90 7,52 7,15 6,87546-1553CGYBAT A Gray Gray Yes 4.61 3.11 1.26 7,90 7,52 7,15 6,87546-1553BBKBAT A Black Gray Yes 4.62 3.11 .95 8,96 7,98 7,35 6,81546-1553BGYBAT A Gray Gray Yes 4.62 3.11 .95 8,96 7,98 7,35 6,81546-1553BBKBKBAT A Black Black Yes 4.62 3.11 .95 8,95 7,98 7,35 6,81546-1553BTBUBKBAT A TransBlue Black Yes 4.62 3.11 .95 8,96 7,98 7,35 6,81546-1553BRDBKBAT A Red Black Yes 4.62 3.11 .95 8,96 7,98 7,35 6,81546-1553BYLBKBAT A Yellow Black Yes 4.62 3.11 .95 8,96 7,98 7,35 6,81546-1553DBKBAT A Black Gray Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49546-1553DGYBAT A Gray Gray Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49546-1553DBKBKBAT A Black Black Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49546-1553DTBUBKBAT A TransBlue Black Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49546-1553DRDBKBAT A Red Black Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49546-1553DYLBKBAT A Yellow Black Yes 5.80 3.50 .98 9,85 8,77 8,08 7,49
SUPER SHIELD CONDUCTIVE COATINGA general purpose EMI/RFI shielding spray for use on plastic electronics enclosures. Consists of a tough, durable acrylicbasepigmentedwithahighpuritynickelflake.Surfaceresistanceofapproximately0.7ohms.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price
EachMfr. Mfr. Part No.590-841-340G Aerosol 340g (12oz.) 26,36
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Dimensions: in. Price EachMfr. Mfr. Part No. L W H 1 25 50 100546-1596B109 G 0.46 0.46 0.35 1,06 0,891 0,82 0,769546-1596B110 G 0.85 0.55 0.46 1,07 0,908 0,825 0,80546-1596B101 G 0.98 0.79 0.59 1,14 0,941 0,875 0,817546-1596B112 G 0.98 0.98 0.98 1,13 0,941 0,875 0,842546-1596B102 G 1.18 0.79 0.59 1,03 0,817 0,751 0,693546-1596B111 G 1.18 1.18 0.79 1,25 1,01 0,932 0,866546-1596B103 G 1.57 1.37 0.79 1,34 1,12 1,05 1,01546-1596B107 G 1.57 1.57 0.79 1,34 1,11 1,02 0,957546-1596B113 G 1.57 1.57 1.15 1,28 1,06 0,974 0,908546-1596B104 G 1.96 1.57 1.18 1,29 1,07 1,01 0,965546-1596B-108 G 1.96 1.96 1.18 1,49 1,24 1,14 1,05546-1596B105 G 2.95 1.98 1.39 2,23 1,86 1,72 1,59546-1596B115 G 3.50 2.52 1.28 2,64 2,20 2,03 1,88546-1596B106 G 3.93 2.36 0.99 2,24 1,89 1,73 1,61
• Temperature rated -20°C to +94°C• 1.0mm(0.04")wallthickness
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Color Price EachMfr. Mfr. Part No. 1 5 10 25546-001151 F Black 4,02 3,02 2,66 2,60546-001152 F Gray 4,02 3,02 2,66 2,60
Pocket/Belt Clip
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Enclosure
ColorDimensions: in. Price Each
Mfr. Mfr. Part No. L W H 1 5 10 25546-001100 E Black 1.57 2.36 0.73 6,67 5,67 5,34 5,00546-001102 E Black 3.35 2.36 0.87 7,52 6,39 5,63 5,26546-001104 E Black 4.13 2.36 0.87 8,00 6,80 6,39 5,99546-001106 E Black 4.92 2.76 0.87 8,48 7,21 6,78 6,36546-001111 E Gray 1.57 2.36 0.73 7,00 5,96 5,61 5,26
PRINTED CIRCUIT BOARDS FOR1553 ENCLOSURES
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Dimensions:
in. (mm) Use with Enclosure Price EachMfr. Mfr. Part No. 1 5 10 25854-PR1553B B 2.8 x 4.3 (71 x 108) 1553BSeries 5,95 5,35 2,66 2,60
• Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held,desktop,orwallmountapplications• Molded in polystyrene plastic• Assembled with four M3x0.5" (13mm) Phillips machine screws (included) threaded into integral bushings
• Includes four self tapping screws for internal standoffs• Lid is a smooth light gray, and the bottomisasmoothdarkgray• Designed to meet IP54
TWO PIECE FIXED PANEL PLASTIC ENCLOSURES
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Ventilated
LidDimensions: in. Price Each
Mfr. Mfr. Part No. L W H 1 5 10 25546-MB655030 D No 2.56 1.97 1.18 11,24 9,39 8,38 7,48546-MB655045 D No 2.56 1.97 1.77 13,65 11,39 10,17 9,08546-MB105025 D No 3.94 1.97 0.98 15,99 14,57 13,38 12,34546-MB105040 D No 3.94 1.97 1.57 15,90 13,27 11,85 10,57546-MB105040VL D Yes 3.94 1.97 1.57 17,50 14,61 13,04 11,63546-MB126540 D No 4.72 2.56 1.57 18,40 15,36 13,70 12,23546-MB126540VL D Yes 4.72 2.56 1.57 20,58 17,18 15,34 13,69546-MB126565 D No 4.72 2.56 2.56 20,36 17,00 15,17 13,55546-MB158055 D No 5.91 3.15 2.17 20,95 17,49 15,61 13,93546-MB158055VL D Yes 5.91 3.15 2.17 21,21 17,70 15,81 14,11546-MB158080 D No 5.91 3.15 3.15 25,48 21,28 18,98 16,94546-MB181170 D No 7.40 4.33 2.76 27,46 22,94 20,47 18,27546-MB181170VL D Yes 7.40 4.33 2.76 33,68 28,12 25,09 22,40546-MB181110 D No 7.40 4.33 3.94 31,35 26,18 23,36 20,85546-MB181112 D No 7.40 4.33 4.72 37,75 33,98 31,33 30,39
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Enclosure
Color
SoftSideColor
Batt. Door
Dimensions: in. Price EachMfr. Mfr. Part No. L W H 1 5 10 25546-1555CF22GY C Gray Gray No 4.72 2.59 1.65 9,23 8,56 8,24 7,93546-155C2F22GY C Gray Gray No 4.72 2.59 1.65 10,73 9,95 9,59 9,22546-1555CF42GY C Gray Gray No 4.72 2.59 2.44 9,51 8,81 8,49 8,17546-1555C2F42GY C Gray Gray No 4.72 2.59 2.44 11,24 10,42 10,04 9,66546-1555FF17GY C Gray Gray No 4.72 3.58 1.45 9,63 8,92 8,60 8,27546-1555F2F17GY C Gray Gray No 4.72 3.58 1.45 11,35 10,68 10,13 9,74546-1555FF42GY C Gray Gray No 4.72 3.58 2.44 9,97 9,25 8,91 8,57546-1555F2F42GY C Gray Gray No 4.72 3.58 2.44 12,00 11,12 10,72 10,31546-1555JF17GY C Gray Gray No 6.26 3.58 1.45 11,70 9,59 9,25 8,89546-1555J2F17GY C Gray Gray No 6.26 3.58 1.45 12,38 11,53 11,06 10,63546-1555JF42GY C Gray Gray No 6.26 3.58 2.44 10,91 10,11 9,74 9,37546-1555J2F42GY C Gray Gray No 6.26 3.58 2.44 15,16 12,44 11,98 11,53
ABS PLASTIC & POLYCARB WATERLIGHT FLANGED LID
• PurchasedassemblyincludesBox,Lid,4xM4x20SSCover ScrewsandPreformedSiliconeGasket• Cover screws should be torqued to 2.5 lbf-in (30 cN-m)
SUPER SHIELD CONDUCTIVE COATINGAgeneralpurposeEMI/RFIshieldingsprayforuseonplasticelectronicsenclosures.Consistsofatough,durableacrylicbasepigmentedwithahighpuritynickelflake.Surfaceresistanceofapproximately0.7ohms.
Note: lid adds .16” to over all depth of case Note: lid adds .16” to over all depth of case Note: lid adds .16” to over all depth of case
For quantities greater than listed, call for quote.
MOuSERSTOCK NO.
HammondPart No. Fig. Color Dimensions: in. Price Each
L W H 1 5 10 25546-1591MSBK 1591MS-BK A Black 3.30 2.20 .80 2,81 2,52 2,33 2,16546-1591LS-BK 1591LS-BK A Black 3.30 2.20 1.40 3,33 3,00 2,77 2,57546-1591AS-BK 1591AS-BK A Black 3.90 2.00 .80 3,10 2,80 2,58 2,39546-1591BS-BK 1591BS-BK A Black 4.40 2.40 1.10 3,37 3,04 2,81 2,58546-1591CS-BK 1591CS-BK A Black 4.70 2.60 1.40 3,56 3,12 2,95 2,87546-1591DS-BK 1591DS-BK A Black 5.90 3.20 1.80 5,30 4,77 4,41 4,08546-1591ES-BK 1591ES-BK A Black 7.50 4.30 2.20 6,32 5,69 5,26 4,87546-1591gS-BK 1591GS-BK A Black 4.80 3.70 1.20 4,22 3,75 3,51 3,26546-1591HS-BK 1591HS-BK A Black 6.50 2.80 1.00 4,20 3,78 3,48 3,23546-1591SS-BK 1591SS-BK A Black 4.30 3.20 1.60 4,53 4,11 3,76 3,49546-1591TS-BK 1591TS-BK A Black 4.70 3.20 2.20 4,98 4,41 4,15 3,84546-1591uS-BK 1591US-BK A Black 4.70 4.70 2.20 5,35 4,74 4,46 4,12546-1591vS-BK 1591VS-BK A Black 4.70 4.70 3.50 6,40 5,73 5,34 5,17
For quantities greater than listed, call for quote.
MOuSERSTOCK NO.
HammondPart No. Fig. Color Dimensions: in. Price Each
L W H 1 5 10 25546-1591MSFLBK 1591MSFL-BK B Black 3.3 2.2 0.8 2,86 2,83 2,82 2,75546-1591LSFLBK 1591LSFL-BK B Black 3.3 2.2 1.4 2,58 2,55 2,54 2,49546-1591ASFLBK 1591ASFL-BK B Black 3.9 2 0.8 2,77 2,67 2,65 2,60546-1591SSFLBK 1591SSFL-BK B Black 4.3 3.2 1.6 4,67 4,66 4,62 4,54546-1591BSFLBK 1591BSFL-BK B Black 4.4 2.4 1.1 2,86 2,83 2,82 2,75546-1591CSFLBK 1591CSFL-BK B Black 4.7 2.6 1.4 3,89 3,88 3,85 3,78546-1591TSFLBK 1591TSFL-BK B Black 4.7 3.2 2.2 5,03 5,02 4,99 4,89546-1591uSFLBK 1591USFL-BK B Black 4.7 4.7 2.2 5,34 5,33 5,30 5,18546-1591vSFLBK 1591VSFL-BK B Black 4.7 4.7 3.5 6,16 6,14 6,10 5,98546-1591gSFLBK 1591GSFL-BK B Black 4.8 3.7 1.2 4,88 4,86 4,83 4,73546-1591DSFLBK 1591DSFL-BK B Black 5.9 3.2 1.8 5,00 4,98 4,95 4,86546-1591HSFLBK 1591HSFL-BK B Black 6.5 2.8 1 4,07 3,86 3,83 3,76546-1591ESFLBK 1591ESFL-BK B Black 7.5 4.3 2.2 6,92 6,90 6,86 6,72
For quantities greater than listed, call for quote.
MOuSERSTOCK NO.
HammondPart No. Fig. Color Dimensions: in. Price Each
L W H 1 5 10 25546-1591MF2SBK 1591MF2SBK C Black 3.3 2.2 0.8 3,24 2,69 2,50 2,32546-1591MF2SgY 1591MF2SGY C Gray 3.3 2.2 0.8 3,23 2,89 2,66 2,48546-1591LF2SBK 1591LF2SBK C Black 3.3 2.2 1.4 3,76 3,14 2,90 2,70546-1591LF2SgY 1591LF2SGY C Gray 3.3 2.2 1.4 3,76 3,36 3,09 2,86546-1591AF2SBK 1591AF2SBK C Black 3.9 2.0 0.8 3,51 2,94 2,69 2,52546-1591AF2SgY 1591AF2SGY C Gray 3.9 2.0 0.8 3,51 3,13 2,88 2,67546-1591SF2SgY 1591SF2SGY C Black 4.3 3.2 1.6 5,33 4,46 4,11 3,81546-1591SF2SBK 1591SF2SBK C Gray 4.3 3.2 1.6 4,22 3,98 3,73 3,48546-1591BF2SBK 1591BF2SBK C Black 4.4 2.4 1.1 3,79 3,16 2,92 2,71546-1591BF2SgY 1591BF2SGY C Gray 4.4 2.4 1.1 3,80 3,37 3,10 2,87546-1591CF2SBK 1591CF2SBK C Black 4.7 2.6 1.4 3,98 3,50 3,32 2,98546-1591CF2SgY 1591CF2SGY C Gray 4.7 2.6 1.4 3,98 3,55 3,27 3,03546-1591TF2SgY 1591TF2SGY C Black 4.7 3.2 2.2 5,80 4,82 4,47 4,17546-1591TF2SBK 1591TF2SBK C Gray 4.7 3.2 2.2 5,45 4,55 4,20 3,89546-1591uF2SBK 1591UF2SBK C Black 4.7 4.7 2.2 5,86 5,24 4,88 4,51546-1591uF2SgY 1591UF2SGY C Gray 4.7 4.7 2.2 5,86 5,21 4,80 4,48546-1591vF2SBK 1591VF2SBK C Black 4.7 4.7 3.5 5,86 5,51 5,17 4,83546-1591vF2SgY 1591VF2SGY C Gray 4.7 4.7 3.5 6,90 6,13 5,64 5,23546-1591gF2SBK 1591GF2SBK C Black 4.8 3.7 1.2 4,69 3,91 3,61 3,35546-1591gF2SgY 1591GF2SGY C Gray 4.8 3.7 1.2 4,69 4,15 3,84 3,56546-1591DF2S-BK 1591DF2SBK C Black 5.9 3.2 1.8 4,90 4,61 4,32 4,03546-1591DF2SgY 1591DF2SGY C Gray 5.9 3.2 1.8 5,76 5,12 4,73 4,38546-1591HF2SBK 1591HF2SBK C Black 6.5 2.8 1.0 4,63 3,86 3,56 3,31546-1591HF2SgY 1591HF2SGY C Gray 6.5 2.8 1.0 4,64 4,11 3,79 3,51546-1591EF2S-BK 1591EF2SBK C Black 7.5 4.3 2.2 6,70 6,10 5,69 5,26546-1591EF2SgY 1591EF2SGY C Gray 7.5 4.3 2.2 6,83 6,08 5,60 5,20
For quantities greater than listed, call for quote.MOuSER
• Ideally suited for mounting PC Boards horizontally• Internal sides of enclosure are smooth for easy connector installation (Largest size includes card guides)
• Tongue and groove lid to box construction provides protection against access of dust and splashing water• Designed to meet IP54• Lid and box both contain molded-in PC standoffs
• Ideally suited for mounting PC Boards horizontally• Internal sides of enclosure are smooth for easy connector installation (Largest size includes card guides)
• Tongue and groove lid to box construction provides protection against access of dust and splashing water• Designed to meet IP54• Lid and box both contain molded-in PC standoffs
For quantities greater than listed, call for quote.
MOuSErStOCK NO.
HammondPart No. Fig. Dimensions: in. Price Each
L W H 1 5 10 25Black546-1591XXASBK 1591XXASBK A 3.90 2.00 0.80 3,10 2,95 2,79 2,64546-1591XXBSBK 1591XXBSBK A 4.40 2.50 1.10 3,35 3,20 3,02 2,85546-1591XXCSBK 1591XXCSBK A 4.70 2.60 1.40 3,56 3,38 3,20 3,03546-1591XXDSBK 1591XXDSBK A 6.00 3.20 1.80 5,29 5,02 4,75 4,49546-1591XXESBK 1591XXESBK A 7.60 4.40 2.20 6,31 6,00 5,68 5,36546-1591XXFSBK 1591XXFSBK A 8.70 5.90 2.30 7,13 6,77 6,42 6,06546-1591XXlSBK 1591XXLSBK A 3.40 2.20 1.40 3,32 3,16 2,99 2,82546-1591XXtSBK 1591XXTSBK A 4.80 3.20 2.20 4,97 4,72 4,47 4,22Black with Flanged lid546-1591XXASFlBK 1591XXASFLBK B 3.90 2.00 0.80 3,26 3,09 2,93 2,76546-1591XXBSFlBK 1591XXBSFLBK B 4.40 2.50 1.10 3,54 3,38 3,18 3,01546-1591XXCSFlBK 1591XXCSFLBK B 4.70 2.60 1.40 3,74 3,55 3,36 3,18546-1591XXDSFlBK 1591XXDSFLBK B 6.00 3.20 1.80 5,55 5,27 5,00 4,72546-1591XXESFlBK 1591XXESFLBK B 7.60 4.40 2.20 6,66 6,32 5,79 5,49546-1591XXFSFlBK 1591XXFSFLBK B 8.70 5.90 2.30 7,81 7,43 7,03 6,64546-1591XXlSFlBK 1591XXLSFLBK B 3.40 2.20 1.40 3,34 3,17 3,00 2,84546-1591XXtSFlBK 1591XXTSFLBK B 4.80 3.20 2.20 5,23 4,97 4,70 4,45
For quantities greater than listed, call for quote.MOuSEr
StOCK NO.Mg Chemicals
Part No. Size Price Each590-841-340g 841-340G Aerosol 340g (12oz.) 26,36
For quantities greater than listed, call for quote.translucent Blue546-1591XXltBu 1591XXLTBU A 3.4 2.2 1.4 5,33 4,78 4,44 4,19546-1591XXAtBu 1591XXATBU A 3.9 2.0 0.8 4,95 4,43 4,13 3,89546-1591XXBtBu 1591XXBTBU A 4.4 2.5 1.1 5,38 4,81 4,48 4,13546-1591XXCtBu 1591XXCTBU A 4.7 2.6 1.4 5,27 5,13 4,81 4,50546-1591XXttBu 1591XXTTBU A 4.8 3.2 2.2 7,99 7,15 6,65 6,27546-1591XXDtBu 1591XXDTBU A 6.0 3.2 1.8 7,77 7,57 7,10 6,63546-1591XXEtBu 1591XXETBU A 7.6 4.4 2.2 10,13 9,63 8,44 7,93Black546-1591XXABK 1591XXABK A 3.90 2.00 0.80 4,95 4,70 4,13 3,70546-1591XXBBK 1591XXBBK A 4.40 2.50 1.10 5,38 5,12 4,84 4,57546-1591XXCBK 1591XXCBK A 4.70 2.60 1.40 5,73 5,26 4,77 4,41546-1591XXDBK 1591XXDBK A 6.00 3.20 1.80 8,45 7,55 7,04 6,31546-1591XXEBK 1591XXEBK A 7.60 4.40 2.20 10,13 9,63 9,12 8,62546-1591XXFBK 1591XXFBK A 8.70 5.90 2.30 10,54 10,02 9,49 8,97546-1591XXlBK 1591XXLBK A 3.40 2.20 1.40 5,32 5,06 4,79 4,52Black with Flanged lid546-1591XXAFlBK 1591XXAFLBK B 3.90 2.00 0.80 5,20 4,64 4,38 4,10546-1591XXBFlBK 1591XXBFLBK B 4.40 2.50 1.10 5,65 4,80 4,38 4,09546-1591XXCFlBK 1591XXCFLBK B 4.70 2.60 1.40 5,99 5,34 5,03 4,70546-1591XXDFlBK 1591XXDFLBK B 6.00 3.20 1.80 8,87 8,42 7,98 7,53546-1591XXEFlBK 1591XXEFLBK B 7.60 4.40 2.20 9,46 8,95 8,43 7,91546-1591XXFFlBK 1591XXFFLBK B 8.70 5.90 2.30 11,23 10,67 10,11 9,55546-1591XXlFlBK 1591XXLFLBK B 3.40 2.20 1.40 5,61 5,00 4,72 4,41546-1591XXtFlBK 1591XXTFLBK B 4.80 3.20 2.20 8,38 7,97 7,55 7,13gray546-1591XXAgY 1591XXAGY A 3.90 2.00 0.80 4,95 4,70 4,46 4,21546-1591XXBgY 1591XXBGY A 4.40 2.50 1.10 5,38 4,81 4,48 4,21546-1591XXCgY 1591XXCGY A 4.70 2.60 1.40 5,72 5,12 4,77 4,27546-1591XXDgY 1591XXDGY A 6.00 3.20 1.80 8,45 7,55 7,04 6,31546-1591XXEgY 1591XXEGY A 7.60 4.40 2.20 10,14 9,63 8,44 7,93546-1591XXFgY 1591XXFGY A 8.70 5.90 2.30 10,54 10,02 9,49 8,97546-1591XXlgY 1591XXLGY A 3.40 2.20 1.40 5,32 5,06 4,44 4,32gray with Flanged lid546-1591XXAFlgY 1591XXAFLGY B 3.90 2.00 0.80 5,20 4,94 4,68 4,42546-1591XXBFlgY 1591XXBFLGY B 4.40 2.50 1.10 5,64 5,02 4,74 4,43546-1591XXCFlgY 1591XXCFLGY B 4.70 2.60 1.40 5,45 5,16 4,85 4,55546-1591XXDFlgY 1591XXDFLGY B 6.00 3.20 1.80 8,87 8,42 7,98 7,53546-1591XXEFlgY 1591XXEFLGY B 7.60 4.40 2.20 10,36 9,22 8,70 8,13546-1591XXFFlgY 1591XXFFLGY B 8.70 5.90 2.30 11,22 10,66 10,10 9,54546-1591XXlFlgY 1591XXLFLGY B 3.40 2.20 1.40 5,12 4,84 4,56 4,28546-1591XXtFlgY 1591XXTFLGY B 4.80 3.20 2.20 7,66 7,24 6,82 6,40
For quantities greater than listed, call for quote.MOuSEr StOCK NO. Fig. Enclosure Color Dimensions: in. Price EachMfr. Mfr. Part No. L W H 1 5 10 25546-1597CgY C Gray 4.33 5.50 1.38 10,57 8,82 7,87 7,43546-1597CBK C Black 4.33 5.50 1.38 10,57 8,82 7,87 7,43546-1597D-gY C Gray 4.92 7.09 1.38 11,76 10,50 9,80 9,19
For quantities greater than listed, call for quote.MOuSEr StOCK NO. Fig. Color Price EachMfr. Mfr. Part No. 1 5 10 25546-1599-ClIP F Black 1,59 1,57 1,55 1,46546-1599ClIPgY F Gray 1,59 1,57 1,55 1,46
For quantities greater than listed, call for quote.546-1597X D Gray 3.50 5.50 1.80 16,57 13,84 12,34 11,02546-1597Y D Gray 5.30 7.90 2.00 24,74 20,66 18,43 17,88
For quantities greater than listed, call for quote.546-1597v E Gray 1.60 5.10 1.00 8,81 7,35 6,56 6,20
• Four P.C. card standoffs molded in bottom• Removable front and rear panels for easy modification-sizedtoacceptmostpopularconnectors• 2 piece lap joint construction
Version B
• Four PC card standoffs molded in both halves• 2 piece lap joint construction
Version C
• 4 PC card standoffs molded in both halves• 4 PC card guides molded in battery compartment• Removable front and rear panels for easy modification-sizedtoacceptmostpopularconnectors• 2 piece lap joint construction
• Heavy duty thermoplastic• Comes with M3mm x .5mm x 20mm countersunk• Phillips machine screws which fasten into integral brass bushings• Average wall thickness: .125"• Lid adds .47" to total height• Designed to meet IP54• ULflammabilityratingof94V-0
• Two key hole knockouts are molded into the inside of the base to facilitate wall mounting installation• Six PC card mounting bosses are molded into the top and base• Designed to meet IP54
• Recessed top panel for membrane display or pad• PC card standoffs and vertical card guides are molded in• Flame retardant ABS version includes four machine screws (styreneareself-tapping)andwearresistantbrassbushing
Includes belt clip
• Recessed top panel for membrane display or pad• PC card standoffs and vertical card guides are molded in• Flame retardant ABS version includes four machine screws (styreneareself-tapping)andwearresistantbrassbushing
• MattetexturedblackfinishHAMMOND PLASTIC ELECTRONIC ENCLOSURESAlsoavailableinblue,gray,andbeige.Contact a Mouser service representative for details. For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
HammondPart No. FIg. Dimensions: in. Price Each
L W H 1 5 10546-1594A-BK 1594A-BK D 2.17 2.17 1.10 6,78 6,07 5,65546-1594B-BK 1594B-BK D 3.15 2.17 1.10 7,10 6,35 5,91546-1594C-BK 1594C-BK D 4.13 2.56 1.30 8,39 7,81 7,20546-1594D-BK 1594D-BK D 5.12 2.56 1.70 10,38 9,29 8,65546-1594E-BK 1594E-BK D 6.50 4.13 2.09 12,79 11,45 10,65HAMMOND PC CARD GUIDES• Packed25setsperpackage,fourguidestoset For quantities greater than listed, call for quote.
For quantities greater than listed, call for quote.MoUSEr
StoCk No.New Age Enclosures
Part No. Fig. Dimensions: in. Color Price Each1 10 25 100
789-S1A-301210 S1A-301210 G 3.0 x 1.25 x 1.0 White 2,36 1,94 1,81 1,73789-S3A-301210 S3A-301210 G 3.0 x 1.25 x 1.0 Black 2,36 1,94 1,81 1,73789-S1A-401210 S1A-401210 G 4.0 x 1.25 x 1.0 White 2,79 2,29 2,14 2,05789-S3A-401210 S3A-401210 G 4.0 x 1.25 x 1.0 Black 2,79 2,29 2,14 2,05789-S1A-501210 S1A-501210 G 5.0 x 1.25 x 1.0 White 3,28 2,69 2,51 2,42789-S3A-501210 S3A-501210 G 5.0 x 1.25 x 1.0 Black 3,28 2,69 2,51 2,42
ABS PLAStIC SCrEW toGEtHEr EXPANDABLE 3" DoNGLE ENCLoSUrES
For quantities greater than listed, call for quote.MoUSEr
StoCk No.New Age Enclosures
Part No. Fig. Dimensions: in. Color Price Each1 10 25 100
789-S1A-251510 S1A-251510 H 2.5 x 1.5 x 1.0 Standard White 2,41 1,97 1,84 1,77789-S3A-251510 S3A-251510 H 2.5 x 1.5 x 1.0 Standard Black 2,41 1,97 1,84 1,77
ABS PLAStIC AAA BAttErY BoX ENCLoSUrES
ABS PLAStIC PrESS toGEtHEr USB ENCLoSUrES
For quantities greater than listed, call for quote.MoUSEr
StoCk No.New Age Enclosures
Part No. Fig. Dimensions: in. Color Price Each1 10 25 100
USB Drive-No Holes789-P3A-180804S P3A-180804S A 1.8 x 0.8 x 0.425 Black 1,77 1,44 1,35 1,30789-P1A-180804S P1A-180804S A 1.8 x 0.8 x 0.425 White 1,77 1,44 1,35 1,30USB Drive-USB Slot789-P3A-180804U P3A-180804U A 1.8 x 0.8 x 0.425 Black 1,77 1,44 1,35 1,30789-P1A-180804U P1A-180804U A 1.8 x 0.8 x 0.425 White 1,77 1,44 1,35 1,30USB Drive-USB Slot and Buttonhole789-P3A-180804UB P3A-180804UB A 1.8 x 0.8 x 0.425 Black 1,77 1,44 1,35 1,30789-P1A-180804UB P1A-180804UB A 1.8 x 0.8 x 0.425 White 1,77 1,44 1,35 1,30USB Memory Stick Enclosure789-P1A-210603k P1A-210603K B 2.1 x 0.6 x 0.3 Key Ring White 2,05 1,68 1,57 1,50789-P1A-210603L P1A-210603L B 2.1 x 0.6 x 0.3 Lens White 2,05 1,68 1,57 1,50789-P3A-210603k P3A-210603K B 2.1 x 0.6 x 0.3 Key Ring Black 2,05 1,68 1,57 1,50789-P3A-210603L P3A-210603L B 2.1 x 0.6 x 0.3 Lens Black 2,05 1,68 1,57 1,50USB Device789-P3A-201005U P3A-201005U C 2.0 x 1.0 x 0.05 Black 1,96 1,61 1,50 1,44789-P1A-201005U P1A-201005U C 2.0 x 1.0 x 0.05 White 1,96 1,61 1,50 1,44
ABS PLAStIC PrESS FIt USB kEY ENCLoSUrESFor quantities greater than listed, call for quote.
MoUSErStoCk No.
New Age EnclosuresPart No. Fig. Dimensions: in. Color Price Each
1 10 25 100789-P1A-120704 P1A-120704 D 1.2 x .71 x .40 USB Slot White 1,34 1,10 1,02 0,982789-P3A-120704 P3A-120704 D 1.2 x .71 x .40 USB Slot Black 1,34 1,10 1,02 0,982
ABS PLAStIC PrESS FIt MINI rEMotE CoNtroL For MINI USB AFor quantities greater than listed, call for quote.
MoUSErStoCk No.
New Age EnclosuresPart No. Fig. Dimensions: in. Color Price Each
1 10 25 100789-P1A-260906 P1A-260906 E 2.6 x 0.9 x 0.6 White 2,28 1,86 1,74 1,67789-P3A-260906 P3A-260906 E 2.6 x 0.9 x 0.6 Black 2,28 1,86 1,74 1,67789-P1A-260906U P1A-260906U E 2.6 x 0.9 x 0.6 USB Slot White 2,28 1,86 1,74 1,67789-P3A-260906U P3A-260906U E 2.6 x 0.9 x 0.6 USB Slot Black 2,28 1,86 1,74 1,67
For quantities greater than listed, call for quote.MoUSEr
StoCk No.New Age Enclosures
Part No. Fig. Description Color Price Each1 10 25 100
789-3A-180804B 3A-180804B - Reset Button For USB Enclosure Black 0,18 0,149 0,14 0,132789-1A-180804B 1A-180804B - Reset Button For USB Enclosure White 0,18 0,149 0,14 0,132789-3A-210603C 3A-210603C - USB Cap Black 0,28 0,231 0,215 0,206789-1A-210603C 1A-210603C - USB Cap White 0,28 0,231 0,215 0,206789-oAL-434313FP OAL-434313FP - Utility Face Plate Gray 3,63 2,98 2,79 2,63
ABS PLAStIC PrESS toGEtHEr ELECtroNIC DoNGLE ENCLoSUrESFor quantities greater than listed, call for quote.
MoUSErStoCk No.
New Age EnclosuresPart No. Fig. Dimensions: in. Color Price Each
1 10 25 100789-P3A-401108 P3A-401108 F 4.0 x 1.1 x 0.8 Black 2,39 1,96 1,83 1,76789-P1A-401108 P1A-401108 F 4.0 x 1.1 x 0.8 White 2,39 1,96 1,83 1,76
For quantities greater than listed, call for quote.MoUSEr
StoCk No.New Age Enclosures
Part No. Fig. Dimensions: in. Color Price Each1 10 25 100
789-S1A-302112 S1A-302112 I 3.8 x 2.41 x 1.05 White 2,66 2,18 2,05 1,93789-S3A-302112 S3A-302112 I 3.8 x 2.41 x 1.05 Black 2,66 2,18 2,05 1,93
For quantities greater than listed, call for quote.MOUSER
STOCK NO.New Age Enclosures
Part No. Fig. Dimensions: in. Color Price Each1 10 25 100
789-S1A-251605 S1A-251605 A 2.5 x 1.6 x 0.5 White 2,84 2,33 2,16 2,09789-S3A-251605 S3A-251605 A 2.5 x 1.6 x 0.5 Black 2,41 1,97 1,84 1,77
For quantities greater than listed, call for quote.Small789-S1A-272008 S1A-272008 B 2.75 x 2.0 x 0.8 White 2,76 2,26 2,11 2,02789-S3A-272008 S3A-272008 B 2.75 x 2.0 x 0.8 Black 2,76 2,26 2,11 2,02Medium789-S1A-352510 S1A-352510 B 3.5 x 2.5 x 1.0 White 3,63 2,98 2,78 2,66789-S3A-352510 S3A-352510 B 3.5 x 2.5 x 1.0 Black 3,63 2,98 2,78 2,66Large789-S1A-453212 S1A-453212 B 4.5 x 3.25 x 1.25 White 4,37 3,65 3,47 3,30789-S3A-453212 S3A-453212 B 4.5 x 3.25 x 1.25 Black 4,37 3,65 3,47 3,30
For quantities greater than listed, call for quote.Medium789-S1A-442710 S1A-442710 E 4.4 x 2.7 x 1.0 White 5,69 4,67 4,36 4,18789-S3A-442710 S3A-442710 E 4.4 x 2.7 x 1.0 Black 5,69 4,67 4,36 4,18Large789-S3A-784114 S3A-784114 F 7.8 x 4.1 x 1.4 Black 5,74 4,71 4,36 4,22Accessories789-209 209 - Single, "AA" Snap-On Battery Clip Steel 0,18 0,149 0,14 0,132789-210 210 - Double, "AA" Snap-On Battery Clip Steel 0,25 0,206 0,19 0,182
For quantities greater than listed, call for quote.789-P1A-251714 P1A-251714 C 2.5 x 1.7 x 1.4 White 2,39 1,96 1,84 -789-P3A-251714 P3A-251714 C 2.5 x 1.7 x 1.4 Black 2,39 1,96 1,84 -
ABS PLASTIC PRESS FIT VENTED UTILITY ENCLOSURES
For quantities greater than listed, call for quote.789-P1A-301910 P1A-301910 G 3.0 x 1.9 x 1.0 White 2,56 2,10 1,96 1,88789-P3A-301910 P3A-301910 G 3.0 x 1.9 x 1.0 Black 2,56 2,10 1,96 1,88
For quantities greater than listed, call for quote.789-S3A-523322 S3L-523322 D 5.18 x 3.10 x 1.17 Black 7,01 5,75 5,36 5,16789-S3A-523322WP S3L-523322WP - 5.18 x 3.10 x 1.17 Wall Plate Black 3,02 2,48 2,31 2,22789-SE-523322OR S-523322OR - O-Ring, Use For Outdoor Utility Natural 1,72 1,41 1,31 1,26
ABS PLASTIC SCREW TOGETHER OUTDOOR UTILITY ENCLOSURES
For quantities greater than listed, call for quote.789-S1A-442710-WE S1A-442710-WE H 4.4 x 2.7 x 1.0 Wall Mount White 6,11 5,01 4,67 4,49789-S1A-442710-WP S1A-442710-WP - 5.35 x 3.10 x 1.17 Wall Plate White 2,11 1,73 1,62 1,55789-S3A-442710-WE S3A-442710-WE H 4.4 x 2.7 x 1.0 Wall Mount Black 6,11 5,01 4,67 4,49789-S3A-442710-WP S3A-442710-WP - 5.35 x 3.10 x 1.17 Wall Plate Black 2,11 1,73 1,62 1,55789-S1A-434313S S1A-434313S H 4.28 x 4.28 x 1.31 White 3,49 2,86 2,68 2,52789-S3A-434313S S3A-434313S H 4.284 x 4.284 x 1.31 Black 3,49 2,86 2,68 2,52789-S1A-434313SW S1A-434313SW H 4.284 x 4.284 x 1.31 White 3,49 2,86 2,68 2,52789-S3A-434313SW S3A-434313SW H 4.284 x 4.284 x 1.31 Black 3,49 2,86 2,68 2,52789-S1A-434313F S1A-434313F H 4.28 x 4.28 x 1.31 White 3,49 2,86 2,68 2,52789-S3A-434313F S3A-434313F H 4.2854 x 4.284 x 1.31 Black 3,49 2,86 2,68 2,52789-S1A-434313FW S1A-434313FW H 4.28 x 4.28 x 1.31 White 3,49 2,86 2,68 2,52789-S3A-434313FW S3A-434313FW H 4.284 x 4.284 x 1.31 Black 3,49 2,86 2,68 2,52789-S1A-312208 S1A-312208 H 3.09 x 2.25 x .84 White 1,99 1,63 1,53 1,44
ABS PLASTIC SCREW TOGETHER WIRELESS WALL MOUNT ENCLOSURES
For quantities greater than listed, call for quote.789-S1A-382410B S1A-382410B I 3.8 x 2.4 x 1.0 w/o Battery Clip White 4,32 3,55 3,31 3,18789-S3A-382410B S3A-382410B I 3.8 x 2.4 x 1.0 w/o Battery Clip Black 4,32 3,55 3,31 3,18789-S1A-382410S S1A-382410S I 3.8 x 2.4 x 1.0 w/o Battery Clip White 3,63 2,98 2,78 2,66789-S3A-382410S S3A-382410S I 3.8 x 2.4 x 1.0 w/o Battery Clip Black 3,63 2,98 2,78 2,66
A - Series H-SeriesStandard H-Seriesw/AAABatteryComp. H-Seriesw/AABatteryCompartment H-Seriesw/9VBatteryComp. H - Series w/ Access Compartment
R - SERiES EquiPmEnT CASES Features:• O-ringwatertight/airtightseal • Pressurepurgevalve• Ergonomichandle • Corrosion proof
There are 4 colors available, replace the (__) in the part number with: Gm for Gunmetal(DarkGray)orB for Black or CY for Caution Yellow or iO for international Orange
* Gm not available
A
C
B
D
• Multiplebatterycompartmentconfigurationswithcontactors• Three-piecedesignwithergonomichandheldshape• Circuitboardmountingbosses• Pocket clip available
• Customcolors,machining,molding,andpadprintingavailable• Pocket clip available
Features:•Hi-Impact ABS plastic •Two-piecedesignwithroundededges•UL94-HBflammabilityrating •Accepts.031"circuitboardtrappedon•Customcolors,machining,molding,andpadprintingavailable outerperimeterandcentralboss•One Insert Area
There are 3 colors available, replace the (__) in the part number with: A for Almond or B for Black or G for Gray
Features:• Ergonomicdesign• 0to6buttonconfigurationsavailable(configurationsvarybymodel)• Allmodelsaredesignedtohold20mmcoincellbattery(CA-10isalsodesignedtohold2xAAAbatteries)• CA-6andCA-8modelshavewatertightbutton(s)andaperimeterring• Assembles with two or three screws• HighimpactABSplastic•UL94-HBflammabilityrating
A B C D
M - Series C - SeriesCA-4 Series
4-ButtonVariationIllustrated
There are 3 colors available, replace the (__) in the part number with: A for Almond or B for Black or G for Gray
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
SerpacPart No.
MOUSERSTOCK NO.
SerpacPart No. Fig.
Dimensions: in. Price Each
L W H 1 10 25Standard With Recessed Top635-021-__ 021-__ 635-021-i-__ 021-I-__ A 4.10 2.60 .90 2,63 2,40 2,18635-031-__ 031-__ 635-031-i-__ 031-I-__ A 4.38 3.25 .91 3,08 2,42 2,19635-032-__ 032-__ - - A 4.38 3.25 1.41 4,49 4,08 3,71635-033-__ 033-__ 635-033-i-__ 033-I-__ A 4.38 3.25 1.91 5,14 4,67 4,23635-051-__ 051-__ 635-051-i-__ 051-I-__ A 5.63 3.25 .91 5,10 4,64 4,21635-052-__ 052-__ - - A 5.63 3.25 1.41 4,74 3,72 3,39635-053-__ 053-__ 635-053-i-__ 053-I-__ A 5.63 3.26 1.91 6,91 6,25 5,70635-071-__ 071-__ 635-071-i-__ 071-I-__ A 6.88 4.88 .91 9,36 7,55 6,43635-072-__ 072-__ 635-072-i-__ 072-I-__ A 6.88 4.88 1.41 13,88 12,65 11,48635-073-__ 073-__ 635-073-i-__ 073-I-__ A 6.88 4.88 1.91 14,51 13,24 12,01635-091-__ 091-__ 635-091-i-__ 091-I-__ A 9.50 6.34 .91 25,86 23,57 21,35635-092-__ 092-__ 635-092-i-__ 092-I-__ A 9.50 6.34 1.41 27,52 26,61 24,56635-093-__ 093-__ 635-093-i-__ 093-I-__ A 9.50 6.34 1.91 29,49 26,74 24,35- - 635-110-i-__ 110-I-__ A 3.63 2.27 1.01 22,94 18,01 16,38635-111-__ 111-__ 635-111-i-__ 111-I-__ A 3.61 2.27 1.51 2,23 2,00 1,87635-112-__ 112-__ - - A 3.61 2.27 2.01 3,09 2,81 2,55635-113-__ 113-__ - - A 3.61 2.27 2.51 3,40 3,09 2,81635-131-__ 131-__ 635-131-i-__ 131-I-__ A 4.38 3.25 1.51 3,41 2,67 2,43635-132-__ 132-__ - - A 4.38 3.25 2.01 4,49 4,09 3,70635-133-__ 133-__ 635-133-i-__ 133-I-__ A 4.38 3.25 2.51 4,90 3,84 3,44635-151-__ 151-__ 635-151-i-__ 151-I-__ A 5.63 3.25 1.51 4,02 3,15 2,87635-152-__ 152-__ - - A 5.63 3.26 2.01 6,50 5,92 5,37635-153-__ 153-__ 635-153-i-__ 153-I-__ A 5.63 3.25 2.51 5,22 4,25 3,59635-171-__ 171-__ 635-171-i-__ 171-I-__ A 6.88 4.88 1.51 5,86 4,60 4,18635-172-__ 172-__ 635-172-i-__ 172-I-__ A 6.88 4.88 2.01 6,43 5,05 4,59635-173-__ 173-__ 635-173-i-__ 173-I-__ A 6.88 4.88 2.51 6,75 5,30 4,82635-182-__ 182-__ 635-182-i-__ 182-I-__ A 14.21 4.88 2.01 12,71 11,57 10,48635-191-__ 191-__ 635-191-i-__ 191-I-__ A 9.50 6.34 1.51 9,02 6,92 6,29635-192-__ 192-__ 635-192-i-__ 192-I-__ A 9.50 6.34 2.01 11,62 11,19 10,33635-193-__ 193-__ 635-193-i-__ 193-I-__ A 9.50 6.34 2.51 9,20 7,23 6,57
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
SerpacPart No. Fig.
Dimensions: in. Price Each
L W H 1 10 25635-05-S-__ 05-S-__ A 5.63 3.25 0.91 5,22 4,76 4,31635-07-S-__ 07-S-__ B 6.88 4.88 1.88 8,98 7,05 6,42635-15-S-__ 15-S-__ C 5.63 3.25 1.51 4,02 3,15 2,87635-17-S-__ 17S-S__ D 6.88 4.88 2.49 6,86 5,39 4,90
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
SerpacPart No.
Dimensions: in. Price Each
L W H 1 10 25635-G-10-A G-10-A 4.38 3.25 .89 3,25 2,95 2,67With Drilled Hole for LED and Recessed Area for Label635-G-10A-A G-10A-A 4.38 3.25 .89 3,25 2,95 2,67
For quantities greater than listed, call for quote.635-25-S-__ 25-S-__ E 5.63 3.25 1.52 4,92 3,86 3,51635-27-S-__ 27-S-__ F 6.88 4.88 2.49 6,55 5,14 4,68
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
SerpacPart No.
MOUSERSTOCK NO.
SerpacPart No. Fig.
Dimensions: in. Price Each
L W H 1 10 25W/ 9V Batt. Compart. With Recessed Top635-231-__ 231-__ 635-231-i-__ 231-I-__ B 4.38 3.25 1.51 4,02 3,16 2,87635-232-__ 232-__ - - B 4.38 3.25 2.01 4,24 3,33 3,04635-233-__ 233-__ 635-233-i-__ 233-I-__ B 4.38 3.25 2.51 5,53 5,04 4,58635-251-__ 251-__ 635-251-i-__ 251-I-__ B 5.63 3.25 1.51 6,16 5,60 5,10635-252-__ 252-__ - - B 5.63 3.25 2.01 5,24 4,12 3,75635-253-__ 253-__ 635-253-i-__ 253-I-__ B 5.63 3.25 2.51 6,92 6,30 5,73635-271-__ 271-__ 635-271-i-__ 271-I-__ B 6.88 4.88 1.51 8,32 7,57 6,90635-272-__ 272-__ 635-272-i-__ 272-I-__ B 6.88 4.88 2.01 7,01 5,51 5,01635-273-__ 273-__ 635-273-i-__ 273-I-__ B 6.88 4.88 2.51 9,12 8,26 7,52
For quantities greater than listed, call for quote.
Features:• All products are tested to stringent 6-Sigma quality in addition to statistical process control• ADDA also performs periodic audits on each product to ensure the best quality control
Specifications:• Framehousingandimpeller;blackPBTperUL94V-0,glass-filled• Operating temperature: -10°C ~=75°C• Life expectancy: 50,000 hours min. @ 25°C, relative humidity by 65°• Lead wire termination• Storage temperature: -40°C to 75°C• Motor protection and polarity protection• AD0312HB-G50(S) - one ball, one sleeve• AD0412HB-C56 - third wire speed sensor (tachometer)• AD0605LB-A72GL - third wire alarm
DC BRUSHLESS FANS
Ball Bearing Type
Sleeve Bearing Type
The FPC (Fan Performance Curve) is measured from the air chamber. The SRC (imaginary System Resistance Curve) must also be measured in the air chamber as it pertains to each application. The intersection of the FPC and SRC is the operating point (OP). Qb and Pb meet the requirement
characteristics of the application.
Standard DC Fan
mouser.com/adda
MODEL NUMBERING SCHEMEAD 06 12 H X - A 7 3 GL
AD=Adda Brushless DC fan; AB=Adda Brushless DC Blower; AP=Adda Brushless Chip cooler AQ=Adda Brushless waterproof fan; AW=Adda CPU cooler; AA=Adda Brushless AC fan
Motor protective circuit & Third Lead Wire:0=by impedance; 3=by IC with speed sensor; 7=low speed; A=VS+RD; 1=by IC; 4=by IC with variable speed sensor(VS); 8=VS+FG; B=PWM+FG; 2=by IC with alarm (RD); 6=by transistor with speed sensor(FG); 9=PWM control; C=RD+FG
Fan type: GL=Low noise; GP=Great performance; Blank=Standard
Features:• ADDA's patented Hypro bearing uses oil recirculation to extend the life of the fan by more than 50,000 hours versus ball bearing fans• All products are tested to stringent 6-Sigma quality in addition to statistical process control• ADDA performs periodic audits on each product to ensure the best quality control
Specifications:• Framehousingandimpeller:BlackPBTperUL94V-0,glass-filled• Operating temperature: -10°C ~ 70°C• Lead wire termination
Features:• All products are tested to stringent 6-Sigma quality in addition to statistical process control• ADDA also performs periodic audits on each product to ensure the best quality control
ADDA’s patented hypro bearing (hyp) solves the friction problem normally found in sleeve axial bearings.
Traditionallythethrustplatefloatsonafilmofoilwhichrapidly depletes. Sintered alloy bearings draw oil from thecavitiestoextendthethrustfloat.ADDA’shypro
goes beyond this by actually developing a hypro wave in the I.D. bearing center where a recess oil reservoir is located. This center point actually runs cooler than the outer surface of the bearing and promotes cold to hot flowcirculation.ADDA’soilrecirculationmethodand
lubricant seal greatly extends the life of the fan.
Features:• Metal housing and impeller• Air intake over struts• Clockwise rotation viewed from rotor• Electrical connection with LZ120 plug and cord set or soldered
• Terminals with 2 flat pins 2.8mm x 5.0mm• 4.3mm mounting holes
Recommended Manufacturer’s Accessories:• Plastic Finger Guard: LZ30-5, LZ30P• Metal Finger Guard: LZ30• Screen/Bracket: LZ40N and LZ40-1
• Metal Mesh Filter: LZ60• Mounting Screw Clip: LZ210• Plug and Cord Set: LZ120 or LZ126
Features:• Metal housing and impeller• Air exhaust over struts• Clockwise rotation viewed from rotor• Electrical connection with LZ120 plug and cord set or soldered
• Terminals with 2 flat pins 2.8mm x 5.0mm• 4.3mm mounting holes
Recommended Manufacturer’s Accessories:• Plastic Finger Guard: LZ30-5, LZ30P• Metal Finger Guard: LZ30• Screen/Bracket: LZ40N and LZ40-1
• Metal Mesh Filter: LZ60• Mounting Screw Clip: LZ210• Plug and Cord Set: LZ120 or LZ126
Features:• Metal housing• Plastic impeller• Termination: 0.110" Terminals• Electrical connection w/ LZ120 plug and cord set or soldered
• Air exhaust over struts• 4.3mm mounting holes
Recommended Manufacturer’s Accessories:• Plastic Finger Guard: LZ30-5, LZ30P• Metal Finger Guard: LZ30• Screen/Bracket: LZ40N and LZ40-1
• Metal Mesh Filter: LZ60• Mounting Screw Clip: LZ210
3900 SERIESFeatures:• Metal housing• Plastic impeller• Termination: 0.110" Terminals
• Electrical connection with LZ120 plug and cord set or soldered• Air exhaust over struts• 4.3mm mounting holes
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ23• Plug and Cord Set: LZ120 or LZ126
Features:• Metal housing and impeller• Air exhaust over struts• Termination: 12.2" leads
Features:• Metal housing, impeller, and terminal block• Termination: terminal strip
• Electrical connection with LZ120 plug & cord set or soldered• 4.5mm mounting holes
W2E200H Series
Features:• Plastic housing and impeller• Features leads• Nominal VAC - 115/230
• External rotor motor• 75% lower power consumption
ACMAxx SeriesThe ACmaxx, the new generation of AC fans, offers a wide input voltage, high efficiency and reliability. The ACmaxx fans have higher volume flow, optional variable speed control, failure detection, speed and function monitoring.
Features:• Electronically commutated external rotor motor• Fully integrated commutation electronics• Electronic protection against reverse polarity, blocking and overloading by PTC-resistor partially impedance protected
• Fiberglass reinforced plastic• PBTP housing • PA impeller
• Air exhaust over struts• Rotational direction CCW looking at rotor
250 SERIESFeatures:• Plastic housing and impeller • Termination: 6.3" leads • Air exhaust over struts • Brushless micro-fan
400F SERIESFeatures:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ29-1
400JHH SERIESFeatures:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ29-1
600F SERIESFeatures:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ28
Features:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Features:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ28
500F SERIESFeatures:• Plastic housing and impeller • Termination: 12.2" leads • Air exhaust over struts • Counterclockwise rotation looking at the rotor
Products may be RoHS compliant. Check mouser.com for RoHS status.
6300 SERIES - S FORCE FANSSpecifications:• Aluminum housing, impeller of fiberglass reinforced plastic PA• Termination: Electrical connection via 2 flat pins 3mm x 0.5mm• Rotational direction CCW looking at rotor
• Air exhaust over struts• Mounting Holes: 4.3mm
400 SERIESFeatures:• Plastic housing and impeller• Termination: 12.2" leads
• Air exhaust over struts• Counterclockwise rotation looking at the rotor
Recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ29-1
*Includes tachometer
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. Dimensions (mm) L x W
Volt. (DC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (ºC)
Bearing Type
Price EachMfr. Mfr. Part No. 1 10 25 50
5912-4414FNN A 119 x 25 24 117.7 8.5 4850 52 70 Ball 58,47 55,55 52,77 50,135912-4412FNH A 119 x 25 12 132.4 12.0 5400 55 70 Sintec 49,90 47,40 45,03 42,785912-4414FNH A 119 x 25 24 132.4 12.0 5400 55 70 Ball 49,90 47,40 45,03 42,78
For quantities greater than listed, call for quote.5912-255N B 25 x 8 5 1.9 0.4 9000 15 70 Sintec 21,65 20,57 19,54 18,565912-255H B 25 x 8 5 2.6 0.6 12000 28 55 Sintec 23,84 22,65 21,52 20,445912-252N B 25 x 8 12 1.9 0.5 9000 15 70 Sintec 21,65 20,57 19,54 18,56
For quantities greater than listed, call for quote.5912-405F B 40 x 10 5 4.7 0.7 5400 22 70 Sintec 13,84 13,15 12,49 11,875912-405FH B 40 x 10 5 5.3 0.7 6000 26 70 Sintec 13,84 13,15 12,49 11,875912-412FM B 40 x 10 12 3.5 0.6 4300 17 70 Sintec 12,68 11,61 11,02 9,835912-412F B 40 x 10 12 4.7 0.7 5400 22 70 Sintec 9,93 9,44 8,97 8,525912-412FH B 40 x 10 12 5.3 0.8 6000 26 70 Sintec 12,08 11,48 10,90 10,365912-414F B 40 x 10 24 4.7 0.8 5400 22 70 Sintec 12,31 11,69 11,11 10,55
For quantities greater than listed, call for quote.5912-412JHH C 40 x 25 12 14.0 3.3 13000 46 60 Ball 32,20 30,59 29,06 27,615912-414JHH C 40 x 25 24 14.0 3.6 13000 46 60 Ball 32,20 30,59 29,06 27,61
For quantities greater than listed, call for quote.5912-512F B 50 x 15 12 12.0 1.0 5000 30 70 Sintec 14,72 13,98 13,28 12,625912-514F B 50 x 15 24 12.0 1.0 5000 30 70 Sintec 14,72 13,98 13,28 12,62
For quantities greater than listed, call for quote.5912-605F B 60 x 15 5 17.1 1.1 4000 27 50 Sintec 15,82 15,03 14,28 13,565912-612FL B 60 x 15 12 11.2 0.4 2650 16 70 Sintec 15,80 13,77 13,43 12,255912-612F B 60 x 15 12 17.1 1.1 3900 27 70 Sintec 14,72 13,98 13,28 12,625912-614F B 60 x 15 24 17.1 1.1 3900 27 70 Sintec 16,27 15,45 14,68 13,94
For quantities greater than listed, call for quote.5912-612NME B 60 x 25 12 20.6 0.8 4100 16 75 Ball 21,43 20,36 19,34 18,385912-612NN B 60 x 25 12 24.0 1.6 5100 35 70 Ball 25,58 24,30 23,09 21,935912-612NHH B 60 x 25 12 27.0 3.0 6850 41 70 Ball 25,61 24,33 23,11 21,955912-614NL B 60 x 25 24 12.4 0.9 2500 16 70 Ball 28,61 23,52 19,08 18,475912-614NGHH B 60 x 25 24 33.0 3.8 6850 43 70 Sintec 20,99 19,94 18,94 18,00
For quantities greater than listed, call for quote.5912-6312/2TDHP D 172 x 51 12 353.1 41.0 6000 64 70 Ball 188,17 178,76 169,82 161,335912-6314/2TDHP D 172 x 51 24 353.1 41.0 6000 64 70 Ball 181,14 172,08 163,48 155,305912-6314/2TDHHP D 172 x 51 24 417.9 67.0 7000 69 70 Ball 188,17 178,76 169,82 161,335912-6318/2TDHHP D 172 x 51 48 417.9 67.0 7000 69 70 Ball 188,17 178,76 169,82 161,33
For quantities greater than listed, call for quote.5912-712F B 70 x 15 12 25.9 1.7 5300 36 70 Sintec 27,37 26,00 24,70 23,46
For quantities greater than listed, call for quote.5912-405 C 40 x 20 5 5.9 0.9 6000 18 70 Sintec 18,15 16,10 13,97 12,795912-412 C 40 x 20 12 5.9 0.9 6000 18 70 Sintec 12,31 11,69 11,11 10,55
* 5912-412/2 C 40 x 20 12 5.9 0.9 6000 18 70 Sintec 15,36 14,07 13,33 11,895912-412H C 40 x 20 12 8.0 1.6 8100 29 60 Sintec 16,57 14,69 12,75 11,685912-414 C 40 x 20 24 5.9 1.0 6000 18 70 Sintec 13,84 13,15 12,49 11,875912-414H C 40 x 20 24 8.0 1.6 8100 29 60 Sintec 22,69 20,13 17,47 16,00
4200 SEriESFeatures:• Plastic housing and impeller• Termination: 12.2" leads• Air exhaust over struts
• Counterclockwise rotation looking at rotor• Mounting holes: 4.3mm
recommended Manufacturer’s Accessories:• Plastic Finger Guard: LZ30-5, LZ30P• Screen/Bracket: LZ40N and LZ40-1• Metal Mesh Filter: LZ60
• Mounting Screw Clip: LZ210• Plug and Cord Set: LZ120 or LZ126
5100N SEriESFeatures:• Electronically commutated external rotor motor• Fully integrated commutation electronics• Electronic protection against reverse polarity and blocking• Counterclockwise rotation looking at rotor
• Metal fan housing and impeller• Mounting holes: 4.3mm• Air exhaust over struts
recommended Manufacturer’s Accessories:• Metal Finger Guard: LZ25• Mounting Screw Clip: LZ210• Plug and Cord Set: LZ120 or LZ126
Features:• Metal housing and plastic impeller• Termination: 0.011" terminals• Air exhaust over struts
• Clockwise rotation looking at rotor• Mounting holes: 4.3mm
recommended Manufacturer’s Accessories:• Plastic Finger Guard: LZ30-5, LZ30P• Metal Finger Guard: LZ30• Screen/Bracket: LZ40N and LZ40-1
• Metal Mesh Filter: LZ60• Mounting Screw Clip: LZ210• Plug and Cord Set: LZ120 or LZ126
2200 FTD SEriES - S ForCE FANSFeatures:• Aluminum housing, fiberglass reinforced PA impeller; housing with grounding lug for screw M4 x 8• Air exhaust over struts; rotational direction CCW looking at rotor
• With electronic protection against reverse polarity• Electrical connection via single leads AWG 20, stripped and tinned ends
• Standard with speed signal and PWM (P) or 0-10VDC / PWM (0) speed control
6200N SEriESFeatures:• Metal housing and plastic impeller• Termination: 0.118" terminals
• Counterclockwise rotation looking at rotor
recommended Manufacturer’s Accessories:• Plug and Cord Set: LZ120 or LZ126• Air exhaust over struts
• Mounting holes: 4.3mm
5200 SEriESFeatures:• Plastic housing and impeller• Termination: 12.2" leads
• Counterclockwise rotation looking at rotor• Air exhaust over struts
PLAsTic FAn GUArds - 09 sEriEsThe 09 Series low cost plastic fan guards, produced with UL94V-0 material are designed for tubeaxial fans with design considerations given to maximize airflow with reduced noise levels.
Features: • Decreased noise level due to design• Withstands high impact
For use with tubeaxial fans.1/4" maximum ring spacing design was developed to assist our customers in complying with domestic and international safety agency requirements.
WirE Form FAn GUArds - 08 sEriEsSpecifications:• Over wire dia. at butt joints: .010 max.• Depth of serrations: .015 max.• Thickness of nickel chrome plating: .005 min.• Tolerance: ±.03"
For fast and screwless fan fastening without vibration to the housing. With the patented rubber elastic sleeves you fasten axial fans without screws, quickly and safe with four mushroom formed pegs on a mounting plate or a housing wall.
Features: • Eliminates transmission of vibration from the fan to the housing and reduces noise up to 9dB• Fast, simple, and safe screwless mounting and remounting from fans• Labor saving device with less mounting costs through shorter mounting times• Protects the fan against vibrations and thus increases the life
Specifications: • Material: TPE (Thermoplastic Elastomer)• Color: Black• Hardness: ca. 70° Shore A• Fire Resistance: UL94V-0
QUALTEK Fan AccessoriesPLASTIC FAN FILTER ASSEMBLIES
FAN FILTERS
Media:• Helps reduce external fan noise• Easily cleaned by vacuuming or washing with most soaps, detergents, or cleaning solvents
Guard:• UL Listed 94V-0 material• Decreased noise level due to design• Withstands high impact
FAN POWER CORDS
Retainer:• UL Listed 94V-0 material• Designed for minimal air restriction
A
B
C
D
E F
G H
Fan-S offers four configurations of high quality fan power cords designed to be used with tubeaxial fans with a strain relief for added safety. Can be used with all AC fans using .110" x .020" faston standard terminals with .3125" spacing. Temperature rating: 105°C (max).
• UL and CSA rated at 7A/300 Volts
• Provides maximum airflow with effective filtering
SLALOM SMT HEAT SINKSEdge mounted "Skis" are designed for use in applications with limited PC board space and allow customization of footprint design and size.Features and Benefits:• Increased thermal performance up to 30% with improved radiation of the black finish• The black finish provides enhanced heat absorption, improving Infra-red reflow process cycle time/quality• Unique, lightweight aluminum design
Applications:• Power Supplies• Motor controls• Medical equipment• Telecommunications equipment• Industrial process control equipment
For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description Packaging Dimensions: in. Price Each
L W H 1 10 100 500532-412512 A SMT heatsink for D² Pak Bulk 26.00 12.70 12.70 1,24 1,18 1,11 1,06
1 250 500 1000532-411399 A SMT heatsink for D² Pak Tape and Reel 26.00 12.70 12.70 2,38 1,98 1,84 1,72
FOR TO-3 CASE STYLES For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description
Ther Res
(ºC/W)
Dimensions: in. Price EachL W H 1 10 100 500
532-579103B00 B Space saving, expandable collar 12.5 1.540 1.125 0.870 2,10 1,93 1,80 1,72532-575703B00 C Space saving, slanted fin basket 13.4 1.630 1.290 0.750 1,33 1,18 0,998 0,858532-501303B00 D Space saving, minimal board space 12.0 1.880 1.400 0.500 0,76 0,72 0,692 0,658532-501403B00 D Space saving, minimal board space 10.0 1.880 1.400 0.750 0,82 0,78 0,745 0,708532-501503B00 D Space saving, minimal board space 8.4 1.880 1.400 1.000 1,14 1,09 1,03 0,984532-501603B00 D Space saving, minimal board space 7.8 1.880 1.400 1.250 1,16 1,11 1,05 1,00532-500403B00 E Slanted fins for efficient cooling 5.0 1.810 1.810 1.250 2,38 2,15 1,86 1,74532-568303B00 F Natural or forced air cooling 5.4 1.810 1.810 1.250 3,47 3,17 2,81 2,68532-569003B00 G Fold-back fins for maximum surface 5.5 1.830 1.830 1.310 2,09 1,85 1,58 1,34532-506007B00 H Universal hole pattern, low profile 7.0 2.000 1.750 0.375 0,90 0,85 0,816 0,775
FOR TO-5 AND TO-39 CASE STYLES For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description
Ther Res
(ºC/W)
Dimensions: in. Price EachL W H 1 10 100 500
532-322505B00 I Space saver, easy installation 40.0 0.750 0.750 0.400 2,14 2,03 1,93 1,83532-322805B00 I Three finned for increased performance 40.0 0.875 0.875 0.531 2,54 2,35 2,24 2,14532-323005B00 J Finned for maximum thermal cooling 56.0 0.750 0.750 0.250 1,70 1,49 1,29 1,08532-578305B00 K Snap-on cooler for easy assembly 35.0 0.750 0.830 0.395 0,82 0,701 0,644 0,611
FOR TO-202 CASE STYLES For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description
Ther Res
(ºC/W)
Dimensions: in. Price EachL W H 1 10 100 500
532-577304B00 O Trim, low profile, minimum space 27.2 0.750 0.520 0.375 0,27 0,25 0,246 0,234532-577404B00 O Trim, low profile, minimum space 24.0 0.750 0.520 0.500 0,27 0,25 0,246 0,234532-531002B25G P Extruded for HD application, solid pins 13.4 0.500 1.380 1.000 1,03 0,90 0,743 0,649532-531102B00 P Extruded for HD application, no pins 10.4 0.500 1.380 1.500 0,88 0,776 0,66 0,594532-531102B25G P Extruded for HD application, solid pins 10.4 0.500 1.380 1.500 1,20 1,14 1,08 1,03532-531202B00 P Extruded for HD application, no pins 7.5 0.500 1.380 2.000 0,98 0,875 0,743 0,685532-531202B25G P Extruded for HD application, solid pins 7.5 0.500 1.380 2.000 1,02 0,908 0,767 0,66532-531302B25 P Extruded for HD application, solid pins 8.0 0.500 1.380 2.500 1,06 0,941 0,80 0,759
FOR TO-218 CASE STYLES For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description
Ther Res
(ºC/W)
Dimensions: in. Price EachL W H 1 10 100 500
532-530101B15G Q Versatile high rise, twisted fins 6.3 0.500 1.750 1.750 1,07 1,01 0,982 0,916532-513102B25 R Solder pins for solder mounting 11.0 0.500 1.380 1.500 0,83 0,731 0,68 0,628532-529801B25G S Solder pins for solder mounting 3.7 1.000 1.650 1.500 1,46 1,39 1,32 1,25
FOR SURFACE MOUNT CASE STYLES For quantities greater than listed, call for quote.
FOR DIP PACKAGES For quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description
Ther Res
(ºC/W)
Dimensions: in. Price EachL W H 1 10 100 500
532-580200B00 W Low cost for 14/16 pin plastic DIP pkgs 20.0 0.837 0.600 0.410 0,36 0,34 0,327 0,31532-501100B00 X Glue-on for 14/16 pin DIP packages 67.0 0.750 0.250 0.190 0,59 0,56 0,54 0,513532-501200B00 Y Glue-on for 14/16 pin DIP packages 68.0 0.730 0.250 0.190 0,62 0,59 0,568 0,539
FOR MULTIWATT CASE STYLES For quantities greater than listed, call for quote.532-566010B03400G T Vertical mount, slide-on with tabs 11.5 1.000 0.500 1.220 1,05 0,932 0,792 0,718
FOR TO-18 AND TO-92 CASE STYLES For quantities greater than listed, call for quote.532-322400B00 L Space saver, easy installation 100.0 0.500 0.500 0.235 1,13 1,07 1,02 0,97
FOR TO-92 CASE STYLES For quantities greater than listed, call for quote.532-575200B00 M Slip-on, low cost, minimum space 60.0 - 0.602 0.720 0,28 0,27 0,258 0,245
FOR TO-126 AND TO-127 CASE STYLES For quantities greater than listed, call for quote.532-507302B00 N Economy, low profile 24.0 0.750 0.750 0.375 0,22 0,20 0,193 0,178
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Aavid Thermalloy
Part No.Fig. Description Orientation Finish Board
Mounting TypeHeatsink to
Device MountingTherRes
(°C/W)Dimensions: In.
(L x W x H)
Price Each1 10
532-531002B00 531002B00000G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize No Pins Mounting Kit 13.4 1.38 x 0.50 x 1.00 0,91 0,759532-531002B25G 531002B02500G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 13.4 1.38 x 0.50 x 1.00 1,03 0,90532-531102B00 531102B00000G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize No Pins Mounting Kit 10.4 1.38 x 0.50 x 1.50 0,88 0,776532-531102B25G 531102B02500G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 10.4 1.38 x 0.50 x 1.50 1,20 1,14532-531202B00 531202B00000G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize No Pins Mounting Kit 7.5 1.38 x 0.50 x 2.00 0,98 0,875532-531202B25G 531202B02500G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 7.5 1.38 x 0.50 x 2.00 1,02 0,908532-531302B25 531302B02500G C Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 8.0 1.38 x 0.50 x 2.50 1,06 0,941532-529802B25G 529802B02500G D Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 3.7 1.65 x 1.00 x 1.50 1,44 1,37532-529902B25G 529902B02500G D Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 4.5 1.65 x 1.00 x 2.00 1,76 1,67532-513002B25G 513002B02500G E Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 13.4 1.38 x 0.50 x 1.00 0,76 0,701532-513102B25 513102B02500G E Extrud. w/radial fins, equal chan. widths front/back Vertical Blk anodize Solder Pins Mounting Kit 11.0 1.38 x 0.50 x 1.50 0,83 0,731532-581002B02500G 581002B02500G F Extruded, flat back, with straight fins Vertical Blk anodize Solder Pins Mounting Kit 17.4 0.64 x 0.64 x 1.00 1,09 0,92532-581202B25G 581202B02500G F Extruded, flat back, with straight fins Vertical Blk anodize Solder Pins Mounting Kit 12.8 0.64 x 0.64 x 2.00 1,43 1,27532-507222B00 507222B00000G G Hat section for dual device Vertical Blk anodize Wave Sldr Mnts 150 Clip 7.0 1.47 x 1.75 x 0.38 0,47 0,45532-507002B00 507002B00000G H Hat section, wide Horizontal Blk anodize No Tabs Mounting Kit 15.6 0.70 x 1.75 x 0.38 0,26 0,24532-507102B00 507102B00000G I Hat section with cut out Horizontal Blk anodize No Tabs Mounting Kit 15.6 0.70 x 1.75 x 0.38 0,28 0,27532-6237B 6237BG J Hat section, clip on Hz. or Vert. Blk anodize No Tabs Kit Not Required 25.0 0.90 x 0.38 x 0.70 0,46 0,44532-572802B00G 572802B00000G K Plug in style w/4 spring action clips Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.57 x 0.50 1,56 1,45532-572802B31G 572802B03100G K Plug in style w/4 spring action clips Horizontal Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.57 x 0.50 1,37 1,28532-572802B39G 572802B03900G K Plug in style w/4 spring action clips Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.57 x 0.50 1,62 1,50532-572802B40G 572802B04000G K Plug in style w/4 spring action clips Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.57 x 0.50 1,49 1,38532-572802B41G 572802B04100G K Plug in style w/4 spring action clips Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.57 x 0.50 1,49 1,38532-576802B00 576802B00000G K Plug in style w/4 spring action clips Vertical Blk anodize No Tabs Kit Not Required 27.3 0.75 x 0.50 x 0.52 0,36 0,34532-576802B31G 576802B03100G K Plug in style w/4 spring action clips, single tab Horizontal Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.50 x 0.52 0,51 0,49532-576802B39G 576802B03900G K Plug in style w/4 spring action clips, single tab Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.50 x 0.52 0,36 0,322532-576802B04000G 576802B04000G K Plug in style w/4 spring action clips, single tab Vertical Blk anodize Solder Tabs Kit Not Required 27.3 0.75 x 0.50 x 0.52 0,49 0,47532-569022B00G 569022B00000G L High power, square base, folded back fins Horizontal Blk anodize No Tabs Mounting Kit 5.5 1.83 x 1.83 x 1.31 2,10 1,87532-575102B00 575102B00000G M Snap down with 2 side fins Hz. or Vert. Blk anodize No Tabs Kit Not Required 16.8 1.12 x 0.43 x 0.75 0,41 0,39532-579302B00 579302B00000G N Snap down with built in clip Hz. or Vert. Blk anodize No Tabs Kit Not Required 16.8 0.98 x 0.44 x 0.75 0,55 0,497532-579402B00 579402B00000G N Snap down with built in clip for beveled device Hz. or Vert. Blk anodize No Tabs Kit Not Required 16.8 0.98 x 0.44 x 0.75 0,61 0,543532-6043PB 6043PBG O Low cost clip on with locking tab Vertical Pre black No Tabs Kit Not Required 23.0 0.80 x 0.27 x 1.00 0,30 0,29
HEATSINKS FOR LED LIGHT SOURCES (TAPE ATTACHMENT METHOD)
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Aavid Thermalloy
Part No. Fig. Surface Dimensions: mm Fin Thickness Thermal Resistance Number of Fins Across Price EachW L H W L Natural Forced W L 1 10 100
532-374124B35G 374124B00035G A Plastic 23.0 23.0 18.0 1.4mm 1.59mm 23.4 7.39 6 6 2,29 1,89 1,73532-374424B35G 374424B00035G A Plastic 27.0 27.0 18.0 1.4mm 1.63mm 20.3 6.46 8 8 2,98 2,83 2,68532-374724B32G 374724B00032G A Metal 35.0 35.0 18.0 1.4mm 1.57mm 15.3 5.15 10 10 3,29 3,12 2,96532-374924B32G 374924B00032G A Metal 40.0 40.0 10.0 .90mm .89mm 20.3 6.46 16 17 3,80 3,42 3,18532-375024B32G 375024B00032G A Metal 40.0 40.0 18.0 1.4mm 1.56mm 12.2 4.34 12 12 4,37 4,15 3,94
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Aavid Thermalloy
Part No. Fig. Surface Dimensions: mm Fin Thickness Thermal Resistance Number of Fins Across Price EachW L H W L Natural Forced W L 1 10 100
532-574102B00 574102B00000G A Low cost slide on with spring action Vertical Black anodized No Tabs 23.2 0.86 x 0.40 x 0.75 0,21 0,182532-574402B32G 574402B03200G A Low cost slide on with spring action Vertical Black anodized Solder Tabs 19.3 0.75 x 0.86 x 0.40 0,51 0,454532-574502B00 574502B00000G A Low cost slide on with spring action Vertical Black anodized No Tabs 21.2 0.86 x 0.40 x 0.75 0,22 0,189532-574502B03700G 574502B03700G A Low cost slide on with spring action Vertical Black anodized Solder Tabs 21.2 0.86 x 0.40 x 0.75 0,37 0,333532-542502B00000 542502B00000G B Space saving staggered fin Vertical Black anodized No Tabs 24.0 0.88 x 0.25 x 1.25 0,36 0,322532-592502B34 592502B03400G B Space saving twisted fin Vertical Black anodized Solder Tabs 22.0 0.88 x 0.25 x 1.25 0,54 0,479532-534302B35 534302B03553 C Space saving staggered fin w/integrated tabs Vertical Black anodized Solder Tabs 10.4 1.38 x 0.48 x 2.00 1,77 1,64532-523002B00 523002B00000G D Channel style heat sink with integrated tabs Vertical Black anodized Twist Tabs 13.6 0.50 x 1.00 x 1.18 0,63 0,53532-6030B-TTG 6030B-TTG E Channel style straight fins with 3 integrated tabs Vertical Black paint Solder Tabs 12.5 1.00 x 0.50 x 1.18 1,72 1,61532-6030DG 6030DG E Channel style w/straight fins with 3 integrated tabs Vertical Tin plate Solder Tabs 12.5 1.00 x 0.50 x 1.18 0,74 0,66532-7020B-MTG 7020B-MTG F Channel style w/folded back fins, TO-220 Vertical Black anodized Solder Tabs 8.7 1.30 x 0.70 x 1.45 0,91 0,86532-7023B-MTG 7023B-MTG G Channel style w/folded back fins, TO-220 Vertical Black anodized Solder Tabs 4.4 1.90 x 1.95 x 0.95 1,33 1,26532-593002B03400G 593002B03400G H Channel style with twisted fins Vertical Black anodized Solder Tabs 13.4 1.00 x 0.50 x 1.18 0,74 0,70532-534202B34G 534202B03453G H Channel style, with device clip Vertical Black anodized Solder Tabs 13.4 1.00 x 0.50 x 1.18 0,64 0,569532-593202B35G 593202B03500G I Space saving with twisted fins Vertical Black anodized Solder Tabs 10.4 1.38 x 0.48 x 2.00 0,83 0,79532-576602B00 576602B00000G J Channel style with integrated tabs (3) Vertical Black anodized Twist Tabs 16.6 1.00 x 0.50 x 0.95 0,68 0,599532-563002B00 563002B00000G J Channel style with integrated tabs Vertical Black anodized Twist Tabs 13.0 1.00 x 0.50 x 1.18 0,36 0,34532-590302B36G 590302B03600G J Hi perform. with 2 tinned tabs, recessed lower fins Vertical Black anodized Solder Tabs 11.2 1.00 x 1.00 x 1.68 0,77 0,685532-575002B00 575002B00000G K Channel style with integrated tabs Vertical Black anodized Twist Tabs 13.6 1.00 x 0.50 x 1.18 0,36 0,34532-576012B00 576012B00000G L Channel style w/ wide mounting surface Hz. or Vert. Black anodized No Tabs 20.8 1.00 x 0.90 x 0.38 0,78 0,70532-530714B00 530714B00000G L Channel style w/ wide mounting surface Horizontal Black anodized No Tabs 20.3 0.71 x 1.00 x 0.50 0,28 0,27532-530613B00 530613B00000G L Channel style w/ wide mounting surface Horizontal Black anodized No Tabs 16.7 1.18 x 1.00 x 0.50 0,40 0,38532-530614B00 530614B00000G M Channel style w/ wide mounting surface Horizontal Black anodized No Tabs 16.7 1.18 x 1.00 x 0.50 0,40 0,38532-507302B00 507302B00000G M Economy low profile channel style, narrow base Horizontal Black anodized No Tabs 24.0 0.75 x 0.75 x 0.38 0,22 0,20532-504102B00 504102B00000G N Economy, narrow channel style Vertical Black anodized No Tabs 15.6 0.78 x 0.70 x 0.85 0,35 0,32532-577002B40G 577002B04000G N Slim, low cost channel style Vertical Black anodized Solder Tabs 32.0 0.75 x 0.52 x 0.25 0,34 0,314532-504222B00 504222B00000G O Economy, narrow channel style, TO-220, Dual Horizontal Black anodized No Tabs 6.4 1.45 x 0.70 x 0.85 0,47 0,45532-7025B-MTG 7025B-MTG P Hi perf. chan. style w/fold back fins, TO-220 Vertical Black anodized Solder Tabs 6.8 1.90 x 0.95 x 1.13 0,93 0,89532-551002B00G 551002B00000G Q High performance channel style with fold back fins Hz. or Vert. Black anodized No Tabs 12.4 1.01 x 0.79 x 1.45 0,61 0,58532-590102B36G 590102B03600G R Hi perform. with 2 tinned tabs, recessed lower fins Vertical Black anodized Solder Tabs 10.0 1.00 x 1.00 x 1.68 1,11 0,99532-6110PB 6110PBG S Low cost channel with device locating tabs Hz. or Vert. Pre black anodized No Tabs 21.0 1.00 x 0.50 x 0.71 0,87 0,817532-7139DG 7139DG T Copper channel slide on with integrated tabs Horizontal Matte tin plated Solder Tabs 28.3 0.78 x .050 x 0.51 0,50 0,454532-7136DG 7136DG U Copper channel with integrated tabs Vertical Matte tin finish Solder Tabs 19.7 .515 x 0.52 x .848 0,76 0,72532-7128DG 7128DG V Copper channel style with integrated tabs Vertical Matte tin finish Solder Tabs 19.2 .866 x .375 x 1.18 0,98 0,93532-7141DG 7141DG W Copper narrow channel with integrated center tab Vertical Matte tin finish Solder Tabs 20.3 0.52 x 0.52 x 0.84 0,69 0,619532-577002B00 577002B00000G X Slim, low cost channel style Hz. or Vert. Black anodized No Tabs 32.0 0.75 x 0.52 x 0.25 0,24 0,23532-577102B00 577102B00000G X Slim, low cost channel style Hz. or Vert. Black anodized No Tabs 25.9 0.75 x 0.52 x 0.38 0,22 0,21532-577102B04000G 577102B04000G X Slim, low cost channel style Vertical Black anodized Solder Tabs 25.9 0.75 x 0.52 x 0.38 0,40 0,38532-577202B00 577202B00000G X Slim, low cost channel style Hz. or Vert. Black anodized No Tabs 24.4 0.75 x 0.52 x 0.50 0,28 0,25532-577202B04000G 577202B04000G X Slim, low cost channel style Vertical Black anodized Solder Tabs 24.4 0.75 x 0.52 x 0.50 0,36 0,314532-6238B-MTG 6238B-MTG Y Channel with integral locking tab Vertical Black anodized Solder Tabs 13.6 1.00 x .610 x 1.16 0,87 0,776
Features:•Reduces assembly cost and labor•Optimizes thermal management•Reduces overall thermal resistance
•Provides mounting for discrete power devices, with or without mounting holes•Allows for easy movement or replacement of components•Eliminates mounting hardware and tools
MAX CLIP® SYSTEM™
INSULATING SHOULDER WASHERS
INSULATORS
THERMALLY CONDUCTIVE INSULATORS
MOUNTING PAD
The Max Clip® System™ for power semiconductors is a high performance, low cost solution to eliminate mounting holes, screws, rivets, and thermal inefficiency. This quick, efficient attachment method saves on labor and hardware costs while increasing design flexibility. A B
C D
E F
G H
I J
K L
M N
O P
Q R
S
•Mica insulators provide high maximum operating temperatures (550°C) and excellent electrical properties•Aluminum oxide has unique thermal conductivity qualities and features low loss factors at high frequencies•It has high compressive strengths, high volume resistivity, low thermal expansion and it resists radiation
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Aavid
Part No. Fig. Description Dimensions: mm Force (lbs.)
Price EachLength Width Thickness 1 10 100
Rail Mounted532-MAXCLIP01G MAX01G A For TO-220, Max 220 14.7 10 0.5 4.9 0,17 0,157 0,14532-MAXCLIP03G MAX03G B For TO-220, TO-247, Max 247 14.7 15 0.5 10.1 0,21 0,182 0,157532-MAXCLIP03-HG MAX03-HG B For TO-247, Max 247, TO-247J 14.7 18 0.6 18 0,28 0,265 0,248532-MAXCLIP10G MAX10G C For TO-220, Max 220 Thin Components 19.7 12 0.6 9 0,19 0,165 0,14532-MAXCLIP09G MAX09G D For TO-220 10.1 10 0.5 10.1 0,24 0,206 0,173532-MAXCLIP01-HG MAX01-HG D For TO-220, Max 220 14.7 10 0.7 18 0,20 0,182 0,155532-MAXCLIP02G MAX02G D For TO-220, Max 220 14.7 12 0.5 7.9 0,17 0,14 0,124532-MAXCLIP02-HG MAX02-HG D For TO-220 10.1 10 0.5 13.5 0,22 0,206 0,19532-MAXCLIP04G MAX04G E For TO-247, Max 247, TO-247J 14.7 20 0.5 13.5 0,26 0,239 0,223532-MAXCLIP11G MAX11G F For TO-220, Max 220 Thin Components 24.7 12 0.6 9 0,25 0,215 0,181532-MAXCLIP12G MAX12G F For TO-92 Sensors 19.7 6 0.6 5.6 0,19 0,171 0,145532-MAXCLIP23G MAX23G G For TO-220, Max 220 14.7 18 0.6 22.5 0,24 0,206 0,173532-MAXCLIP16G MAX16G H For TO-247 10.5 17 0.5 10.1 0,30 0,275 0,249Screw On532-MAXCLIP07G MAX07G I For TO-220, Max 220, Max 247 .87 12 0.5 11.2 0,17 0,149 0,124532-MAXCLIP08G MAX08G J For TO-218, TO-247, Max 247, TO-247J .93 18 0.5 16.9 0,24 0,21 0,169Clip over Edge532-CLP212G CLP212G K For TO-220/Max220 18.9 10 0.5 4.7 0,32 0,302 0,276532-CLP212MG CLP212MG L For TO-247/Max247 18.9 15 0.6 8.1 0,27 0,256 0,231532-CLP212SG CLP212SG M For Sensors/Thin Components 10.0 7 0.5 4.5 0,21 0,19 0,173532-CLP212TG CLP212TG N For TO-220/Max220 14.6 10 0.6 7.6 0,19 0,173 0,157
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Aavid
Part No. Fig. Dimensions: in. Screw Size Price EachA B C D E 1 10 100
Features:• Permits high power levels or lower operating temperatures while occupying a minimun of valuable board space• Allows back-to-back dual mounting for thermal matching applications
Features:• Thermal resistance values based on power density of 3 watts/in²• Thermal resistance of adhesive tape is included
• Bendable tabs simplify installation to the circuit board—no mounting hardware or special tool required• Each dissipator is optimally designed for maximum effective surface area in a minimum working envelope
D SErIES HEaTSInkSFeatures:• Increased thermal performance up to 30% over bright copperheatsinksfromimprovedradiationofblackfinish• Increased surface areas by 3 times therefore thermal performance up to 300% over the aluminum stamped heat sinks on markets
• Unique aluminum extrusion design reduces the heat sink cost versus similiar designs utilizing copper• Radius mounted “Rollers” are designed for maximizing heat transfer from the component and avoiding thermal “bottle-neck” seen in stamped and staked heatsinks
For quantities greater than listed, call for quote.MOUSEr
STOCk nO.OhmitePart no. Fig. For Package Type Finish Price Each
1 25 50588-Da-T263-101E DA-T263-101E A TO-263 Black anodized 2,23 1,91 1,61588-DV-T263-101E DV-T263-101E A TO-263 Degreasedfinish 2,06 1,81 1,45588-Da-T268-101E DA-T268-101E A TO-268 Black anodized 1,89 1,59 1,41588-DV-T268-101E DV-T268-101E A TO-268 Degreasedfinish 1,76 1,43 1,27
reel of 250 For quantities greater than listed, call for quote.MOUSEr
STOCk nO.OhmitePart no. Fig. For Package Type Finish Price Each
250 500 1250588-Da-T263-101E-Tr DA-T263-101E-TR A TO-263 Black anodized 1,39 1,21 1,15588-DV-T263-101E-Tr DV-T263-101E-TR A TO-263 Degreasedfinish 1,25 1,10 1,05588-Da-T268-101E-Tr DA-T268-101E-TR A TO-268 Black anodized 1,50 1,32 1,25588-DV-T268-101E-Tr DV-T268-101E-TR A TO-268 Degreasedfinish 1,38 1,20 1,15
DIMEnSIOnS: in. (mm)
a
B
C
D
E
E SErIES HEaTSInkS
For quantities greater than listed, call for quote.MOUSEr STOCk nO. Fig. “H” Dimensions:
in.±.010 (mm±.25) For Package Type Finish Price EachMfr. Mfr. Part no. 1 10 100588-EV-T220-38E B 1.5 (38.10) TO-220 Degreasedfinish 2,01 1,78 1,61588-Ea-T220-38E B 1.5 (38.10) TO-220 Black anodized 2,08 1,85 1,66588-EV-T220-51E B 2.0 (50.80) TO-220 Degreasedfinish 2,15 1,91 1,72588-Ea-T220-51E B 2.0 (50.80) TO-220 Black anodized 2,23 1,98 1,78588-EV-T220-64E B 2.5 (63.50) TO-220 Degreasedfinish 2,42 2,19 1,93588-Ea-T220-64E B 2.5 (63.50) TO-220 Black anodized 2,49 2,20 1,99
• Heat Sink: Aluminum 6063-T5 or equivalent• Solder feet: Tin plated brass
NPL
For quantities greater than listed, call for quote.MOUSEr
STOCk nO.OhmitePart no. Fig. “H” Dimensions:
in.±.010 (mm±.25)For Package
Type Finish Price Each1 10 100
588-Fa-T220-25E FA-T220-25E C 1.0 (25.4) TO-220 Black anodized 1,38 1,23 1,15588-Fa-T220-38E FA-T220-38E C 1.5 (38.1) TO-221 Black anodized 1,41 1,27 1,17588-Fa-T220-51E FA-T220-51E C 2.0 (50.8) TO-222 Black anodized 1,72 1,55 1,43588-Fa-T220-64E FA-T220-64E C 2.5 (63.5) TO-223 Black anodized 1,92 1,72 1,60
F SErIES HEaTSInkSSpecifications:• Solder: 100% tin (Sn)• Material 6063-T5 aluminum• PC board attachement : 0.091" dia. Pre-tinned pins.
Features:• Vertical mounting with solderable pins
M SErIES HEaTSInkSFeatures:• Maximumthermaltransfer,maximumsurfaceareaperunitvolume,efficientcoolingfinsandconsistentmountingforcereducesthermalresistance• Maximum repeatability, constant spring force over repeated assembly/disassembly• Maximum reliability, resilient spring action locks electronic component in place
For quantities greater than listed, call for quote.MOUSEr
STOCk nO.OhmitePart no. Fig. For Package Type Finish Price Each
1 10 100588-Ma-102-55E MA-102-55E D TO-247; TO-264 Black anodized 6,63 5,62 4,79588-MV-102-55E MV-102-55E D TO-247; TO-264 Degreasedfinish 6,42 5,62 4,65
NPL
For quantities greater than listed, call for quote.MOUSEr
STOCk nO.OhmitePart no. Fig. “H” Dimensions:
in. ± .010 (mm±.25) For Package Type Finish Price Each1 10 100
588-ra-T2X-25E RA-T2X-25E E 1.0 (25.4) TO-220; TO-218; TO-247 Black anodized 1,68 1,51 1,40588-ra-T2X-38E RA-T2X-38E E 1.5 (38.1) TO-220; TO-218; TO-247 Black anodized 2,02 1,80 1,69588-ra-T2X-51E RA-T2X-51E E 2.0 (50.8) TO-220; TO-218; TO-247 Black anodized 2,44 2,17 2,03588-ra-T2X-64E RA-T2X-64E E 2.5 (63.5) TO-220; TO-218; TO-247 Black anodized 2,84 2,53 2,37
r SErIES HEaTSInkSSpecifications:• Solder: 100% tin (Sn)• Material 6063-T5 aluminum• PC board attachement : 0.091" dia. Pre-tinned pins.
For quantities greater than listed, call for quote.567-609-50ABS3 609-50ABS3 E 40mm C4QFP, 21mm CBGA 2.98 (73.41) x 2.0 (50.8) x .5 (12.7) 5,84 5,26 4,97567-628-40AB 628-40AB F IntelDX4™, Intel 80486DX2™, and AM486™DX2, AM486™DX4 1.75 (44.45) x 1.7 (43.18) x .40 (10.16) 1,96 1,57 1,34567-628-65AB 628-65AB F IntelDX4™, Intel 80486DX2™, and AM486™DX2, AM486™DX4 1.75 (44.45) x 1.7 (43.18) x .65 (16.51) 2,73 2,18 1,86567-658-25AB 658-25AB F PowerQuad2™, 28-38mm Omnidirectional Pin Fin, No Tape 1.1 (27.94) x 1.1 (27.94) x .25 (6.35) 0,89 0,71 0,606567-658-35AB 658-35AB F PowerQuad2™, 28-38mm Omnidirectional Pin Fin, No Tape 1.1 (27.94) x 1.1 (27.94) x .35 (8.89) 0,89 0,71 0,606567-658-45AB 658-45AB F PowerQuad2™, 28-38mm Omnidirectional Pin Fin, No Tape 1.1 (27.94) x 1.1 (27.94) x .45 (11.43) 0,95 0,759 0,644567-658-60AB 658-60AB F PowerQuad2™, 28-38mm Omnidirectional Pin Fin, No Tape 1.1 (27.94) x 1.1 (27.94) x .60 (15.24) 1,10 0,875 0,743567-658-60ABT3 658-60ABT3 F PowerQuad2™, 28-38mm Omnidirectional Pin Fin, Chomerics T-412 1.1 (27.94) x 1.1 (27.94) x .60 (15.24) 2,27 1,82 1,54567-D10650-40 D10650-40 G Pin Fin for 84 - 100 pin PQFP & 169 BGA .65 (16.51) x .65 (16.51) x .40 (10.16) 1,66 1,19 0,85567-D10850-40 D10850-40 G Pin Fin for 128 - 208 Pin PQFP & 313 BGA .85 (21.59) x .85 (21.59) x .40 (10.16) 2,11 1,54 1,38
For quantities greater than listed, call for quote.567-173-7-220P 173-7-220P K TO-220 DeltaPads™ .007" (.18mm) Insulator .71 (18.03) x .50 (12.7) .141 dia. (3.6 dia.) 0,38 0,281 0,215567-173-9-240P 173-9-240P K TO-220 DeltaPads™ .009" (.23mm) Insulator .75 (19.05) x .50 (12.7) .147 dia. (3.7 dia.) 0,52 0,479 0,446567-175-6-220P 175-6-220P K TO-220 Kapton® .006" (.15mm) Reinforced Insulator .71 (18.03) x .50 (12.7) .141 dia. (3.6 dia.) 0,26 0,239 0,223567-175-6-230P 175-6-230P K TO-220 Kapton® .006" (.15mm) Reinforced Insulator .71 (18.03) x .50 (12.7) .125 dia. (3.2 dia.) 0,21 0,173 0,157567-175-6-240P 175-6-240P K TO-220 Kapton® .006" (.15mm) Reinforced Insulator .75 (19.05) x .50 (12.7) .147 dia. (3.7 dia.) 0,23 0,198 0,173567-175-6-280P 175-6-280P K TO-220 Kapton® .006" (.15mm) Reinforced Insulator .86 (21.8) x .74 (18.8) .16 dia. (4.1 dia.) 0,36 0,33 0,305567-175-6-310P 175-6-310P L TO-3 Kapton® .006" (.15mm) Reinforced Insulator 1.59 (40.5) x 1.14 (29.0) .062 dia. (1.6 dia.) 0,64 0,512 0,454
For quantities greater than listed, call for quote.567-537-24AB 537-24AB H Quarter Brick Horizontal Fin Orientation 1.45 (36.82) x 2.28 (57.91) x .24 (6.1) 3,14 2,51 2,13567-537-45AB 537-45AB H Quarter Brick Horizontal Fin Orientation 1.45 (36.82) x 2.28 (57.91) x .45 (11.43) 4,54 3,63 3,09567-537-95AB 537-95AB H Quarter Brick Horizontal Fin Orientation 1.45 (36.82) x 2.28 (57.91) x .95 (24.13) 5,12 4,09 3,48567-547-95AB 547-95AB H Quarter Brick Vertical Fin Orientation 1.45 (36.82) x 2.28 (57.91) x .95 (24.13) 8,21 6,57 5,91567-517-95AB 517-95AB I Half Brick Horizontal Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .95 (24.13) 3,81 3,05 2,59567-518-95AB 518-95AB I Half Brick Vertical Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .95 (24.13) 4,08 3,27 2,78567-518-95AB-MS4 518-95AB-MS4 I Half Brick Vertical Fin Orientation w/HDWR and Deltalink IV Thermal Pad 2.28 (57.91) x 2.4 (60.96) x .95 (24.13) 6,21 5,71 4,85567-527-45AB 527-45AB I Half Brick Horizontal Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .45 (11.43) 3,24 2,59 2,20567-527-24AB 527-24AB I Half Brick Horizontal Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .24 (6.1) 2,68 2,15 1,82567-528-24AB 528-24AB I Half Brick Vertical Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .24 (6.1) 2,97 2,38 2,02567-528-45AB 528-45AB I Half Brick Vertical Fin Orientation 2.28 (57.91) x 2.4 (60.96) x .45 (11.43) 3,53 2,82 2,40567-557-140AB 557-140AB J Full Brick Horizontal Fin Orientation 2.4 (60.96) x 4.6 (116.84) x 1.4 (35.56) 11,14 10,58 10,05567-558-75AB 558-75AB J Full Brick Vertical Fin Orientation 2.4 (60.96) x 4.6 (116.84) x .75 (19.05) 9,03 8,58 8,15
Specifications:• Thickness range: 0.2mm to 8.9mm (0.008" to 0.350") availability varies by product line• UL Flammability: 94V-0
Applications:• Telecom - wireless infrastructure, routers and VOIP phones• IT - noteboooks, servers, memory modules, hard disk drives, solid state drives, scanners and printers• Consumer - gaming systems, LCD PDP televisions, and displays• Industrial - LED lighting, power supplies, lighting ballasts, controllers, scanners, and power converters• Aerospace and military - power supplies, microwave radio, and controllers
Tflex™ gap fillers are used to bridge the interface between hot components and a chassis or heat sink assembly. The combination of good thermal conductivity and softness reduces mechanical stress, but maintains thermal performance.
TgArd™ ELECTrICAL INSULATOrS
Applications:• Industrial - power supplies and standard TO-packages that require isolation• Telecom - board-to-chassis system electrical isolation
Tgard™ thermally conductive electrical insulators are used where electrical isolation is a critical design consideration, with reliability, cut-through resistance, and thermal conductivity.
ELECTrICALLY CONdUCTIVE THErMAL INTErFACE MATErIAL
Specifications:• Thickness range: 0.5mm to 5.1mm (0.02" to 0.200") bulk, availability varies by product line• UL Flammability: 94V-0
Applications:• Especially good for applications that require high conductivity and low cost without softness
Tgon™ 800 series is a high-performance, cost effective TIM that can be used where electrical isolation is not required. Tgon 800's unique grain oriented graphite plate structure provides high 240 W/mk thermal conductivity along the XY plane, and 5 W/mk through the Z axis.
Tputty™ gap fillers are used to bridge the interface between hot components and a chassis or heat sink assembly when elimination of mechanical stress or bulk dispensing are critical design considerations.
Applications:• IT - servers, desktops, notebooks, and memory modules• Industrial - power supplies, lighting, LED lighting, and industrial electronics
TpCM™ ANd TgrEASE™ HIgH-pErFOrMANCE prOdUCTSHigh-performance products are used in applications where mechanical tolerances and general design has been optimized for thermal performance.
The Tpcm™ phase change product line is used in applications where reliability, repeatability, and handling must be controlled to optimize the performance as part of the total thermal solution. Available in screen printable formulation that offers the reliability and performance of a phase change material with the low-cost handling of thermal grease.
Tgrease™ is used in applications where a minimum bond line, constant pressure, and ease of screen printing is desired for optimal performance. They are designed to maximize reliability by eliminating pump out in most applications.
• Telecom - routers and wireless infrastructure• Consumer - gaming systems and portable devices
A
B
C
D
E
F
For quantities greater than listed, call for quote.
MOUSErSTOCK NO.
Laird Thermalpart No.
Fig. Series Type
Breakdown Voltage Color Size Material
Operating Temperature
RangeTensile Strength Thickness
price Each
1 5739-A15324-01 A15324-01 A Tflex 300 >10,000 VAC Green 9" x 9" Tflex 340 -40° to 160°C 15 40 mils 24,65 22,93739-A15330-03 A15330-03 A Tflex 300 >10,000 VAC Green 9" x 9" Tflex 3100,DC1 -40° to 160°C 15 100 mils 28,12 26,14739-A14556-01 A14556-01 A Tflex 500 >10,000 VAC Blue 9" x 9" Tflex 520FG -45° to 200°C 66 20 mils 96,27 77,01739-A14558-01 A14558-01 A Tflex 500 >10,000 VAC Blue 9" x 9" Tflex 540 -45° to 200°C 66 40 mils 35,55 33,06739-A14562-01 A14562-01 A Tflex 500 >10,000 VAC Blue 9" x 9" Tflex 580 -45° to 200°C 46 80 mils 61,03 50,86739-A14566-01 A14566-01 A Tflex 500 >10,000 VAC Blue 9" x 9" Tflex 5120 -45° to 200°C 46 120 mils 117,24 93,79739-A12618-01 A12618-01 A Tflex 600 >5,000 VAC Purple 9" x 9" Tflex 640 -45° to 200°C 15 40 mils 57,68 55,06739-A12618-33 A12618-33 A Tflex 600 >5,000 VAC Purple 18" x 18" Tflex 640 -45° to 200°C 15 40 mils 230,72 214,57
For quantities greater than listed, call for quote.
MOUSErSTOCK NO.
Laird Thermalpart No.
Fig. Series Type
Breakdown Voltage Color Size Material
Operating Temperature
RangeTensile Strength
Thick-ness
price Each
1 5739-A10462-03 A10462-03 B Tgon 805 - Pewter 12" x 18" Tgon 805,A0 -240° to 300°C 650 5 mils 7,77 7,23739-A10462-02 A10462-02 B Tgon 805 - Pewter 12" x 18" Tgon 805,A1 -240° to 300°C 650 5 mils 11,63 10,93739-A10462-15 A10462-15 B Tgon 805 - Pewter 18" x 24" Tgon 805,A1 -240° to 300°C 650 5 mils 13,63 12,54739-A10463-01 A10463-01 B Tgon 810 - Pewter 12" x 18" Tgon 810,A0 -240° to 300°C 650 10 mils 8,99 8,46739-A10463-02 A10463-02 B Tgon 810 - Pewter 12" x 18" Tgon 810,A1 -240° to 300°C 650 10 mils 13,88 13,05739-A10464-01 A10464-01 B Tgon 820 - Pewter 12" x 18" Tgon 820,A0 -240° to 300°C 650 20 mils 10,91 10,26739-A10464-02 A10464-02 B Tgon 820 - Pewter 12" x 18" Tgon 820,A1 -240° to 300°C 650 20 mils 16,67 15,67739-A10245-06 A10245-06 C Tputty 502 >5,000 VAC White 9" x 9" Tputty 502FG2 -45° to 200°C - 90 mils 226,53 210,66739-A10548-08 A10548-08 C Tputty 502 >5,000 VAC White 9" x 9" Tputty 502FG2 -45° to 200°C - 40 mils 30,29 25,64739-A10238-09 A10238-09 C Tputty 502 >5,000 VAC White 9" x 9" Tputty 502FG2 -45° to 200°C - 90 mils 144,51 134,39739-A13717-03 A13717-03 C Tputty 504 - Light Grey 30cc, manual Tputty 504 -45° to 200°C - - 70,41 61,49
syringe
For quantities greater than listed, call for quote.
MOUSErSTOCK NO.
Laird Thermalpart No.
Fig. Series Type Color Size MaterialOperating
Temperature Range
price Each
1 5739-A14855-03 A14855-03 D Tgrease White 0.5 kg can Tgrease 1500 max 125°C 131,86 122,63739-A15423-02 A15423-02 D Tgrease White 10cc manual syringe Tgrease 1500 max 125°C 39,72 36,93739-A15819-04 A15819-04 D Tgrease White 305cc auto syringe Tgrease 1500 max 125°C 220,52 205,09739-A15423-03 A15423-03 D Tgrease White 30cc manual syringe Tgrease 1500 max 125°C 62,24 57,88739-A16241-01 A16241-01 D Tgrease White 30cc jar Tgrease 1500 max 125°C 14,13 13,28739-A14259-05 A14259-05 D Tgrease White 1/2 kg Tgrease 2500 -55° to 150°C 223,50 207,85739-A14399-01 A14399-01 D Tgrease White 10cc syringe Tgrease 2500 -55° to 150°C 54,48 50,67739-A16241-02 A16241-02 D Tgrease White 30cc jar Tgrease 2500 -55° to 150°C 18,67 17,55739-A14399-02 A14399-02 D Tgrease White 30cc syringe Tgrease 2500 -55° to 150°C 55,94 44,76739-A14399-03 A14399-03 D Tgrease White 50cc syringe Tgrease 2500 -55° to 150°C 102,26 95,10739-A15028-01 A15028-01 D Tgrease Gray 1/2 kg Tgrease 880 -40° to 150°C 271,09 252,11739-A16241-03 A16241-03 D Tgrease Gray 30cc jar Tgrease 880 -40° to 150°C 21,66 20,35739-A10832-02 A10832-02 E Tpcm Yellow 9" x 9" Tpcm 910 -25° to 125°C 14,96 13,91
For quantities greater than listed, call for quote.
MOUSErSTOCK NO.
Laird Thermalpart No.
Fig. Package Type
Breakdown Voltage Material
Operating Temperature
RangeTensile Strength Thickness
price Each
1 100739-A15037003 A15037003 F TO-220 >6,000 VAC Kit, Tgard 5000, A0 -76° to 180°C 40 MPa 5 mils 0,08 0,064739-A15038003 A15038003 F TO-247 >6,000 VAC Kit, Tgard 5000, A0 -76° to 180°C 40 MPa 5 mils 0,16 0,126739-A15432003 A15432003 F TO-252 >6,000 VAC Kit, Tgard 5000, A0 -76° to 180°C 40 MPa 5 mils 0,13 0,107
PGS (Pyrolytic Graphite Sheet) is a thermal interface material which is very thin, synthetically made, has high thermal conductivity, and is made from a highly oriented graphite polymerfilm. PGS (Pyrolytic Highly Oriented Graphite Sheet) is made of graphite with a structure that is close to a single crystal, which is achieved by the heat decomposition of polymeric film.
It is ideal for providing thermal management/heat-sinking in limited spaces or to provide supplemental heat-sinking in addition to conventional means. This material is flexible and can be cut into customizable shapes.
Flexibility:PGS is bending-resistant due to its flexibility. PGS can be used for areas such as curved surfaces and corners because its heat conductivity will remain unchanged in the absence of folds in PGS.
Thermal Resistance Property:Thermal resistance represents the degree of non-conductivity of the heat. Materials with lower thermal resistance are a more efficientconductor of heat (Thermal resistance depends on hardness of, and surface condition of material as well as heat conductivity.)
Features:• Excellent thermal conductivity• Flexible and easy to be cut or trimmed• Low thermal resistance
Specifications:• Lightweight: Specific gravity: 0.85 to 2.1 g/cm3• Heat resistance: 400°C• Bending (angle 180, R5): 10,000 cycles
Recommended Applications:• Cellular phone, DVC, DSC, PC and peripherals, pickup• Semiconductor manufacturing equipment• Optical communications equipment
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
PanasonicPart No. Style Type Inductance
(µm) Size (mm) Thickness (mm) Price Each
667-EYG-A091203V EYG-A091203V A A-V 25 90×115 0.025 20,98667-EYG-A091207M EYG-A091207M A A-M 70 90×115 0.07 18,22667-EYG-A091207P EYG-A091207P A A-PA 70 90×115 0.07 18,22667-EYG-A091207V EYG-A091207V A A-V 70 90×115 0.07 20,98667-EYG-A091210B EYG-A091210B A A-B 100 90×115 0.1 25,26667-EYG-A091210P EYG-A091210P A A-PA 100 90×115 0.1 25,26667-EYG-A091210T EYG-A091210T A A-T 100 90×115 0.1 20,25667-EYG-A121803M EYG-A121803M A A-MM 25 115x180 0.025 34,67667-EYG-A121803S EYG-A121803S A A-SM 25 115x180 0.025 38,52667-EYG-A121807A EYG-A121807A A A-A 100 115x180 0.07 39,25667-EYG-A121810A EYG-A121810A A A-A 100 115x180 0.1 39,19667-EYG-A121810B EYG-A121810B A A-B 100 115x180 0.1 50,53667-EYG-A121810K EYG-A121810K A A-K 100 115x180 0.1 40,54667-EYG-A121810M EYG-A121810M A A-MM 100 115x180 0.1 39,19667-EYG-A121810P EYG-A121810P A A-PA 100 115x180 0.1 50,53667-EYG-A121810T EYG-A121810T A A-T 100 115x180 0.1 40,50667-EYG-A121810V EYG-A121810V A A-V 100 115x180 0.1 41,96667-EYG-C091210C EYG-C091210C C C-C 100 90x115 0.1 20,11667-EYG-M060910SS EYG-M060910SS M M-SS 100 90x115 0.1 20,83667-EYG-M091210SS EYG-M091210SS M M-SS 100 90x115 0.1 41,66667-EYG-M121810SS EYG-M121810SS M M-SS 100 115x180 0.1 81,47667-EYG-M121810SW EYG-M121810SW M M-SW 100 115x180 0.1 72,69667-EYG-S091203 EYG-S091203 S S 25 90x115 0.025 22,17667-EYG-S091207 EYG-S091207 S S 70 90x115 0.07 22,17667-EYG-S091210 EYG-S091210 S S 100 90x115 0.1 22,63667-EYG-S121803 EYG-S121803 S S 25 115x180 0.025 44,34667-EYG-S121807 EYG-S121807 S S 70 115x180 0.07 44,34667-EYG-S121810 EYG-S121810 S S 100 115x180 0.1 45,32667-EYG-S182310 EYG-S182310 S S 100 180x230 0.1 72,60
Features:• Precise Temperature Control• Compact Geometric Sizes• Reliable Solid State Operation• No Sound or Vibration
Features:• Thermal Cycling Durability• Power Cycling Reliability
Features:• Strong Lead Attachment• Precise Temperature Control
• Reliable Solid State Operation• No Sound or Vibration
• Precise Temperature Control• Strong Lead Attachment
• Continuous Operation at High Temperatures
• DC Operation
• Environmentally Friendly• DC Operation• RoHS Compliant
Benefits:• Precise temperature control with tolerances of ±0.1°C achieved under steady state conditions• DC operation with reverse polarity for heating and cooling in thermal cycling applications• Rapid cool down below ambient temperatures• Tight geometric space constraints and low weight requirements• Reliable solid-state operation with no sound or vibration (lifetimes of more than 200,000 hours)• Large temperature differentials, ΔT >123°C, with multi-stage cascade product line
• Power generation from waste heat—patented ThermaTECTM is operational up to 225°C• Virtually no electrical noise• Environmentally friendly, no CFC refrigerants• Low maintenance, easy to repair• Aerospace• Defense• Medical• Consumer Electronics• Food & Beverage
Applications:• Medical Lasers• Lab Science Instrumentation• Clinical Diagnostic Systems• Photonics Laser Systems
The Ceramic Plate (CP) Series of Thermoelectric Modules (TEMs) is considered ‘the standard’ in the thermoelectric industry. This broad product line of high-performance and highly reliable TEMs is available in numerous heat pumping capacities, geometric shapes, and input power ranges. Assembled with Bismuth Telluride semiconductor material and thermally conductive Aluminum Oxide ceramics, the CP Series is designed for higher current and large heat-pumping applications. For all CP Series modules, wire is stranded, 114 mm (4.5") long and PVC insulated.
Thermal management of electronic components and systems is critically important and more challenging than ever. Power densities continue to increase, while product form factors continue to shrink. Engineers must now consider thermal management technologies and their applications early in the product design process. Simple thermal management solutions, such as adding a fan or heat sink, are no longer typically viable to meet required performance and reliability specifications. In today’s complex operating environment, thermoelectrics are required to provide precise cooling and heating in a variety of modular platforms including air conditioning, liquids, and direct contact designs.
For quantities greater than listed, call for quote.
THERMOELECTRIC MODuLES - MS SERIESFeatures:• High temperature differential• Precise temperature control• Reliable solid state operation• Environmentally friendly• DC operation• RoHS compliant
Applications:• CCD cameras• Electron microscope• Calibration equipment• Photonics laser systems• Gas analyzers• Infrared (IR) Sensors• Guidance Systems
For quantities greater than listed, call for quote.
THERMOELECTRIC MODuLES - OPTOTEC SERIESFeatures:• Miniature geometric sizes• Precise temperature control• Reliable solid state operation• No sound or vibration• DC operation• RoHS compliant