En Programme 2012

Programme 2012

Pro

gra

mm

e 2

012

ww

w.s

tah

lwille

.de

EDUARD WILLE GmbH & Co.KG

P.O.Box 12 01 03

42331 Wuppertal

Germany

Tel.: +49 202 4791-0

Fax: +49 202 4791-355

[email protected]

www.stahlwille.de

the forging blank through to the finished product,

in our own production facilities. We place

emphasis on ecological compatibility and

protection of our environment.

Contributing to efficient business success using

high-grade tools, guaranteeing reliability and

accuracy, maintaining close proximity to the

customer – this is only possible by applying

decades of experience, human candidness and

confidence in each other.

We hope you will take our slogan „Key to

success“ the way it is meant: more than just an

advertising slogan, a lot more …

This claim is central to STAHLWILLE‘s message.

Literally. It is the commitment we make to our

customers.

In making this claim, STAHLWILLE focuses on

the benefit to the customer because we want

them to be able to use tried-and-tested, perfect

tools, every time. Tools that are more durable,

stronger – and, as a result, more economical.

By the way: STAHLWILLE products are exclu-

sively made in German production facilities.

Our entire range of tightening tools is manu-

factured throughout the production process, from

Key to success

3

Tool trolleys, Page 10-62

Tool boxes, Sets

Spanners Page 64-83

Sockets, Socket sets, Page 86-139

Accessories for manual drives

IMPACT sockets, Page 142-154

Accessories, machine actuated

Torque tools, Page 156-196

Torque testers

Screwdrivers Page 198-212

Pliers Page 214-241

Pipe cutters, Page 244-259

Hammers, Chisels, Files,Miscellaneous tools

Pullers Page 262-267

Special automotive tools Page 270-311

1

3

5

7

9

2

4

8

10

6

4

13214 Line maintenance set, metric sizes, in tool box No 13216/4

30

12322 Tungsten carbide scribing iron

256

25812966 Wire stripping knife with hooked blade

96832095

96832099

96832100

96832101

96832622

96832096

96832097

96832098 96832102

2501N TCS New workshop set for BMW motorbikes (consisting of 9 TCS sets)

287

1

2

25aSP Spline drive ratchet ring spanners

79

735/65 Ratchet insert tool

177

125532G Ratchet

125512G Ratchet

Encapsulated housing

minimises the ingress of dirt.

1

5

158-26 Plastic pipe shears247

158-35 Plastic pipe shears

247

158-42 Plastic pipe shears

247

165N Double flaring tool,new design

247

1204/21-1 BITS box (Phillips®, Internal hex,TORX®, POZIDRIV®)

150 1501204/21-2 BITS box (Phillips®, Slotted, TORX®, Internal hex, TORQ-SET®)

3

6637 Crimping pliers

231


231

735/65 Ratchet insert tool

177


232


231


231

High precision crimping

Easy-action force transmission

Simple handling

1

6966 Stripping andcutting tool for use with crimping pliers

232

6

1

4

STAHLWILLE tools are known in over

100 countries of the world. Not only that, they

enjoy an excellent reputation, after all, customers

from the fields of energy generation, aerospace,

transport, industry and the trades put their

confidence in solid quality, forged and finished

exclusively in German locations.

The result is more than the sum of its parts: carefully

crafted designs, high-grade materials, sophisticated

workmanship and dependable quality.

7

1

5

STAHLWILLE handtools are designed on the

basis that they are an extension to your hand.

This is how intelligent designs that can deal

with considerable loads, provide easy and

safe handling and a high degree of reliability is

created.

Special forging techniques give the already

high-grade steel the ideal molecular structure.

STAHLWILLE‘s rounded finish gives the smooth

finishing touches to the tool surface making it

skin-friendly and easy to hold.

8

1

6

STAHLWILLE tools are to be found in many

fields. In energy generation, in transport, in

aerospace and in industry. In fact, wherever

safety, accuracy and speed are required.

For example, STAHLWILLE develops

high-grade tools and sets of tools – including

High Performance Quality, for use on aero-

planes, e.g. for use with Hi-Lok bolts and the

Tool Control System (awarded the Aerospace

Industry Award).

Tools for the energy generating industry require

attention to complex ideas in other dimensions.

For years, STAHLWILLE has had an excellent

reputation among experts both at home and

abroad. They understand that safety and ease

of use are guaranteed.

In the field of transport, STAHLWILLE develops

complete kits of special-purpose tools together

with leading vehicle manufacturers –

guarantees for mobility worldwide.

97

In motorsports as well – a field that has always

been a test bed for new ideas – STAHLWILLE

has a long tradition of professional involvement.

Whether it is in Formula One, the Superbike

world championships or the 24-hour Nürburg-

ring races: As technical sponsors, we and our

tools are at the very heart of the action –

gathering valuable ideas to assist in the further

development and design of our tools.

Having said all that, it is quite logical that

STAHLWILLE‘s quality assurance system is

certified in accordance with DIN EN ISO 9001,

isn‘t it?

1

10

1

1862 Company founded by Eduard Wille

1899 The company traditions are carried on by

Emil and Eduard Wille, the sons of the

owner.

1914 The Wille brothers now employ 500 staff

and a further 25 trainees/apprentices.

Approx. 80% of all products made are

exported, mainly to European countries.

1938 The company is taken on by the grand-

children of the founder. STAHLWILLE now

employs approx. 400 employees.

1955 The family business expands moderately.

The multilingual catalogue contains

around 3,000 different tools.

Today, the company is still a family-owned

business with more than 500

employees. Management is by Managing

Directors who are independent of the

family, checks and controls exercised

by an advisory board.

Exports are distributed worldwide to

over 100 countries through our own

distributor companies.

Three different production locations, all

in Germany.

8

1

1

1

920 + R 920 920 + 922N 920 + 97N/7R

The system and its components

10

The CONVERTA system and its components are

a modular system. The system consists of wheely

boxes with drawers or up-and-over doors,

magazines with integrated carrying handles,

magazine drawers and magazines and a set of

wheels, and detachable spray-can holders.

Thanks to the possibility of combining the many

modules available, there are almost no limits to the

options open to the user in optimising his or her

individual tool-storage environment.

All the magazines are positioned on flat magazine

drawers which can be locked in place when

ex tended. The tool magazines and standard

drawers are interchangeable. A safety

mechanism prevents more than one drawer being

opened at any one time.

All the boxes can be fitted with a cylinder lock to

enable central locking. The boxes can still be

locked even if one or more magazines or drawers

have been removed.

All painted parts have an environmentally friendly

powdercoat. The worktops of the cases are fitted

with an oil and skydrol resistant plastic mat with

compart ments for small components.

The undersides of the magazines have non-slip

film attached to them.

11

1

CONVERTAThe modular components system in the aerospace industry(maintenance), in industry, the trades and all servicework in the field for maintenance and assembly jobs

x Fully mobile for use anywhere.x Multitalented – numerous combination options.x Wheel it – or carry it.x Interchangeable drawers and a range of magazines.

Magazines are placed on flat drawers and can be opened easilywhen the drawer is pulled out.The undersides are coated with non-slip, Skydrol and oil resistantrubber.

x The magazine drawers can easily be exchanged for normal drawers(as with the Tool trolleys and Tool boxes in the full range).

x Topple-proof because only one drawer can be opened at any onetime.

x Drawers designed to match the STAHLWILLE inlay system.x Can be completely locked using the laterally-mounted cylinder

lock (central locking).x Hanging option for spray-can holders.x Tough worktop made of plastic, oil and Skydrol resistant with

compartments for screws, nuts etc.x Can be combined with Tool trolley No 97.x All painted parts have an environmentally friendly powdercoat.

Magazine case920with 5 drawers and 5 magazines. Converts to tool trolley withundercarriage No R 920. Features two removable spray can holders on the end pieces of the caseand two integrated lifting handles. Drawers for mounting magazines are removable and lockable in fullyextended position. The magazines can be replaced with standard drawers. The worktop of thecase is fitted with an oil and Skydrolresistant plastic mat withcompartments for small components.

‘

Can be combined RCode Colour with No kg €‘

81480000 red RAL 3020 920; 922N; 94N; 97N; 97N/KM; 97H/8; 97H/KM 39 1075.00

‘

Wheely box with drawers922NWith 4 wheels O 125 mm (2 pivoting castors, one wheel with parking brake). With 5 silver-coloured drawers (sizes: 4 drawers 60 mm high, 1 x 80 mm). Drawers are removable and lockable in fully extended position.The worktop of the case is fitted with an oil and Skydrol resistant plasticmat with compartments for small components.Spray can holders No SDH 921 can be retrofitted to the sides (please order separately).

‘

Can be combined RCode Colour with No kg €‘

96480002 red RAL 3020 920; 94N 37.4 670.00‘

Accessories CONVERTA

Magazine drawer920 C-SCHCoated with environmentally friendly silver-coloured texturedpowder-coat.For mounting tool magazines No 920 C.

‘

RCode kg €‘

81481000 2.64 58.50‘

Tool magazines920 CCoated with environmentally friendly silver-coloured texturedpowder-coat.For use with magazine drawers No 920 C-SCH.

‘

Dimensions Can be combined RCode No mm with No kg €‘

81481060 920 C 60 530 x 350 x 48 920; 922N; 92KM G; 94N; 97N/7; 97N/7KM; 97N/8; 97N/8KM; 97H/10KM 3.2 109.00

81481080 920 C 80 530 x 350 x 68 920; 922N; 92KM G; 94N; 97N/6; 97N/6KM; 97N/8; 97N/8KM; 97H/8; 97H/KM 3.3 110.00

81481120 920 C 120 530 x 350 x 108 92KM G; 97N/6; 97N/6KM; 97N/7; 97N/7KM; 97N/8; 97N/8KM; 97H/8; 97H/8KM 3.7 119.00

‘

Got your drawers organised?

With our Tool Control System, thetools are arranged in chemical-resistant special foam inlays with three-dimensional cut-outs. Thesignal colour is yellow. A quickglance at the tray shows the servicetechnician instantly if everything iswhere it should be. If he can seeyellow – there’s something wrong!

The modular tool tray system

Tool trays from STAHLWILLEensure perfect tool managementwithin the Tool Trolley. All the toolsare neatly arranged and instantlyat hand, and always securely heldin the same place.

Made-to-measure for workshop professionals

Compact, sturdy outer housing enables numerous

different configurations, each in 4 colours – this

exceptionally flexible range of STAHLWILLE Tool

Trolleys leaves nothing to be desired!

This modular system, where the Tool Trolleys can

have from 6 to 10 drawers and a range of heights,

enables you to configure your STAHLWILLE Tool

Trolleys to meet your own specific needs.

To maximise efficiency, fit the drawers with the

STAHLWILLE Tool Control System or

corresponding standard ABS inlays. Exploit the

convenient choice of accessories such as the

rubbish bin, multifunctional back panel etc. to

enhance the already generous standard

equipment and create your own personal

workspace.

Spray-can holder

Multifunctionalback panel No 913/3 –

ensures a tidy workspace

The wheels on the Tool Trolleyenable easy manoeuvring even

when heavily loaded

13

Double-bearing wheels,

oil and acid-resistant

2 Parking brakes

Fully extendible drawers,

simply lift to lock in place

Removable drawers

Smooth-action rollers

Subdivided worktop

Cylinder lock at side

to provide central locking

Topple-proof – it is not possible to pull out

more than one drawer at a time

Can be equipped with STAHLWILLE Standard

and Tool Control System inlays

Can be combined with Tool box No 94

4 colour options:

The right version for every application

Product benefits at a glance:

Additional tray No 913/2 –extends the worktop

Mobile work benchNo 97N/6KM

Green

Standard

Blue

RAL 270 30 35

Red

RAL 3020

Grey

RAL 7016

14

Tool trolleys, Tool boxes, Sets

Tool trolleys, Tool boxes, Workbenches and accessories

Tool trolleys97N/6KMwith solid multi-purpose worktop No 913/1, plastic handles on the drawersand impact protection strips on the vertical edges, fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes and 6 removabledrawers mounted on smooth-action rollers, fully extendible drawers, simplylift to lock in place. Topple-proof – it is not possible to pull out more thanone drawer at a time. Holders for paper rolls and spray cans. Can beenhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59).Central locking thanks to the laterally-mounted cylinder lock. Can becombined with Tool boxes No 94N and No 94N/KM. Can also beenhanced using additional tray No 913/2 and multifunctional back panel

No 913/3 (please order separately).

‘

RCode No Colour kg €‘

81160004 97N/6KM G green 49.2 1006.0081160005 97N/6KM R red, RAL 3020 49.2 1006.0081160006 97N/6KM B blue, RAL 2703035 49.2 1006.0081160040 97N/6KM AU charcoal grey, RAL 7016 49.2 1006.00‘

Tool trolleys97N/6with double-bearing, oil and acid-resistant wheels, 2 parking brakes and 6 removable drawers mounted on smooth-action rollers, fully extendibledrawers, simply lift to lock in place. Topple-proof – it is not possible to pullout more than one drawer at a time. Holders for spray cans and paperrolls. Divided work area. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinder lock. May be combined with Tool boxes No 94N andNo 94N/KM.

‘


81160001 97N/6G green 47.7 836.0081160002 97N/6R red, RAL 3020 47.7 836.0081160003 97N/6B blue, RAL 2703035 47.7 836.0081160058 97N/6A U charcoal grey, RAL 7016 47.7 836.00‘

Tool trolleys97N/7KMwith solid multi-purpose worktop No 913/1, plastic handles on the drawersand impact protection strips on the vertical edges, fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes and 7 removabledrawers mounted on smooth-action rollers, fully extendible drawers, simplylift to lock in place. Topple-proof – it is not possible to pull out more thanone drawer at a time. Holders for paper rolls and spray cans. Can beenhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59).Central locking thanks to the laterally-mounted cylinder lock. Can becombined with Tool boxes No 94N and No 94N/KM. Can also beenhanced using additional tray No 913/2 and multifunctional back panelNo 913/3 (please order separately).

‘


81160010 97N/7KM G green 51.4 1060.0081160011 97N/7KM R red, RAL 3020 51.4 1060.0081160012 97N/7KM B blue, RAL 2703035 51.4 1060.0081160057 97N/7KM A U charcoal grey, RAL 7016 51.4 1060.00‘


‘


81160007 97N/7G green 49.9 890.0081160008 97N/7R red, RAL 3020 49.9 890.0081160009 97N/7B blue, RAL 2703035 49.9 890.0081160059 97N/7A U charcoal grey, RAL 7016 49.9 890.00‘

STAHLWILLE green RAL 3020 RAL 2703035 RAL 7016 STAHLWILLE green RAL 3020 RAL 2703035 RAL 7016


15

1

Tool trolleys97N/8KMwith solid multi-purpose worktop No 913/1, plastic handles on the drawersand impact protection strips on the vertical edges, fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes and 8 removabledrawers mounted on smooth-action rollers, fully extendible drawers, simplylift to lock in place. Topple-proof – it is not possible to pull out more thanone drawer at a time. Holders for paper rolls and spray cans. Can beenhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59).Central locking thanks to the laterally-mounted cylinder lock. Can becombined with Tool boxes No 94N and No 94N/KM. Can also beenhanced using additional tray No 913/2 and multifunctional back panelNo 913/3 (please order separately).

‘


81160016 97N/8KM G green 53.5 1131.0081160017 97N/8KM R red, RAL 3020 53.5 1131.0081160018 97N/8KM B blue, RAL 2703035 53.5 1131.0081160041 97N/8KM AU charcoal grey, RAL 7016 53.5 1131.00‘


‘


81160013 97N/8G green 51.7 951.0081160014 97N/8R red, RAL 3020 51.7 951.0081160015 97N/8B blue, RAL 2703035 51.7 951.0081160060 97N/8AU charcoal grey, RAL 7016 51.7 951.00‘

Tool trolleys97H/8KMwith solid multi-purpose worktop No 913/1, plastic handles on the drawers andimpact protection strips on the vertical edges, with smooth-running plasticcastors, 2 locking brakes and 8 removable drawers mounted on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Topple-proof –it is not possible to pull out more than one drawer at a time. Holders for spraycans and paper rolls. Can be enhanced with STAHLWILLE standard and TCSinlays (see pp. 33–59). Side wall space can be individually optimised using thesquare-hole perforations and hooks No 8031–8041. Central locking thanks tothe laterally-mounted cylinder lock. May be combined with Tool boxes No 94Nand No 94N/KM. Can also be enhanced using additional tray No 913/2 andmultifunctional back panel No 913/3 (please order separately).

‘


81160036 97H/8KM G green 56.8 1190.0081160037 97H/8KM R red, RAL 3020 56.8 1190.0081160038 97H/8KM B blue, RAL 2703035 56.8 1190.0081160035 97H/8KM AU charcoal grey, RAL 7016 56.8 1190.00‘

Tool trolleys97H/8

‘


81160031 97H/8G green 55 987.0081160032 97H/8R red, RAL 3020 55 987.0081160033 97H/8B blue, RAL 2703035 55 987.0081160061 97H/8AU charcoal grey, RAL 7016 55 987.00‘



with smooth-running plastic castors, 2 locking brakes and 8 removable drawersmounted on smooth-action rollers, fully extendible drawers, simply lift to lock inplace. Topple-proof – it is not possible to pull out more than one drawer ata time. Holders for spray cans and paper rolls. Divided work area. Can beenhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Sidewall space can be individually optimised using the square-hole perforationsand hooks No 8031–8041. Centrallocking thanks to the laterally-mountedcylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.

16


1

Tool trolleys97H/10KMwith solid multi-purpose worktop No 913/1, plastic handles on the drawersand impact protection strips on the vertical edges, with smooth-runningplastic castors, 2 locking brakes and 10 removable drawers mounted onsmooth-action rollers, fully extendible drawers, simply lift to lock in place.Topple-proof – it is not possible to pull out more than one drawer at a time.Holders for spray cans and paper rolls. Can be enhanced withSTAHLWILLE standard and TCS inlays (see pp. 33–59). Side wall spacecan be individually optimised using the square-hole perforations andhooks No 8031–8041. Central locking thanks to the laterally-mountedcylinder lock. May be combined with Tool boxes No 94N and No 94N/KM.Can also be enhanced using additional tray No 913/2 and multifunctionalback panel No 913/3 (please order separately).

‘


81160054 97H/10KM G green 63.5 1349.0081160055 97H/10KM R red, RAL 3020 63.5 1349.0081160056 97H/10KM B blue, RAL 2703035 63.5 1349.0081160062 97H/10KM AU charcoal grey, RAL 7016 63.5 1349.00‘

Tool boxes94N/KMwith plastic handle on the drawers and impact protection strips on thevertical edges and with 5 removable drawers on smooth-action rollers, fully extendible drawers, simply lift to lock in place. Handles integrated inside walls. Central locking thanks to the laterally-mounted cylinder lock.Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Can also be mounted on Tool trolleys No 97N, No 97H,Wheely box No 922N.

‘


81430017 94N/KM G green 35.5 666.0081430018 94N/KM R red, RAL 3020 35.5 666.0081430019 94N/KM B blue, RAL 2703035 35.5 666.0081430007 94N/KM AU charcoal grey, RAL 7016 35.5 666.00‘

Tool boxes94N5 removable drawers on smooth-action rollers, fully extendible drawers,simply lift to lock in place. Handles integrated in side walls. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59). Central locking thanks to the laterally-mounted cylinderlock. Can also be mounted on Tool trolleys No 97N, No 97H/8, Wheely box No 922N.

‘


81430001 94NG green 32.5 585.0081430002 94NR red, RAL 3020 32.5 585.0081430003 94NB blue, RAL 2703035 32.5 585.0081430008 94NAU charcoal grey, RAL 7016 32.5 585.00‘

STAHLWILLE green RAL 3020 RAL 2703035 RAL 7016



17

1

Mobile workbench92KM Gwith 4 smooth-running plastic wheels, of which 2 are swivelling and haveparking brakes; 7 removable drawers with plastic handles, smooth-actionrollers, fully extendible drawers, simply lift to lock in place, holders for paperrolls and spray cans, 30 mm multiplex beechwood worktop. Roomy storagearea with a shelf in the cabinet, drawers and access door to storage area,each individually lockable with a cylinder lock. One outer side and theinside of the storage area access door can be individually adapted to suitrequirements using perforated sheets with square holes for hooksNo 8031–8041. Can be enhanced with STAHLWILLE standard and TCS inlays (see pp. 33–59).

‘

RCode kg €‘

85010014 73.0 1869.00‘

Mobile workbench96/3with chassis and retractable tool panel. 5 ball-bearing mounted steeldrawers with slotted liners for partitioning drawers.Aluminium handle. Automatic catches on all drawers prevent themopening in transit. Lockup cabinet with height-adjustable shelf. Worktop is 50 mm thick, warp- and water resistant, multilayer bondedbeech wood with clear varnish finish. Front edge has hardwood edging strip.

‘

RCode kg €‘

85030003 160 2980.00‘

Drawerscoated with environmentally friendly silver-coloured texturedpowder-coat.

‘


81482060 SCH 60 530 x 350 x 60 94N; 97N/7; 97N/8; 922N 2.4 69.5081482080 SCH 80 530 x 350 x 80 94N; 97N/6; 97N/8; 97H/8;

920; 922N 2.8 71.5081482100 SCH 100 530 x 350 x 100 97N/6; 97N/7; 97N/8;

97H/8 3.1 72.0081482120 SCH 120 530 x 350 x 120 97N/6; 97N/7; 97N/8;

97H/8; 920 3.2 72.501

81482140 SCH 140 530 x 350 x 140 97N/6; 97N/7; 97H/8 3.5 76.00‘

Drawers with plastic handlescoated with environmentally friendly silver-coloured texturedpowder-coat.

‘


81483060 SCH 60KM 530 x 350 x 60 92KM G; 97N/7KM; 97N/8KM; 97H/10KM; 94N/KM 2.5 82.50

81483080 SCH 80KM 530 x 350 x 80 92KM G; 97N/6KM; 97N/8KM; 97H/8KM; 97H/10KM; 94N/KM 2.65 83.00

81483100 SCH 100KM 530 x 350 x 100 97N/6KM; 97N/7KM; 97N/8KM; 97H/8KM; 97H/10KM 3.3 83.50

81483120 SCH 120KM 530 x 350 x 120 92KM G; 97N/6KM; 97N/7KM; 97N/8KM; 97H/8KM; 97H/10KM 3.4 84.00

1

81483140 SCH 140KM 530 x 350 x 140 97N/6KM; 97N/7KM; 97H/8KM 3.6 84.50

‘

Drawer separatorsVE 50-150

‘

RCode for No kg €‘

81484001 92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 0.7 21.00

‘

allow you to divide up the drawer theway you need it.Consisting of: one each galvanisedsteel front and back piece and threeseparators.Separator height = 40 mm.

18


1

Multifunctional back panel913/3Perforated panel for attaching to multipurposeworktop No 913/1, for mounting drawings & docketsusing magnets or for hanging tools with hook setsNo 8031 to 8041. Consisting of: 2 uprights forinserting in the base and perforated panel, silverpaint finish.

‘

RCode mm kg €‘

89010024 570 x 365 x 40 3.7 149.00‘

Set of wheelsR 920Set consists of two fixed wheels and two pivoting, 125 mm O. Two wheels with locking brake.

‘


89480001 94N; 94N/KM; 97N; 97N/KM; 920; 922N 4.3 56.00‘

Rubbish bin for attaching to tooltrolleys

AB97N

Capacity approx. 9 l. All painted parts have anenvironmentally friendly silver finish powder coat.

‘

RCode for No mm kg €‘

89010012 92KM G; 97N; 97N/KM; 97H/8; 97H/KM 278 x 300 x 140 2.1 55.00

‘

Personal boxPB98for personal effects. With separate locking system.Can be bolted to Tool trolleys built in 2008 or later;for fitting to older models, 2 holes will need to bedrilled (6.5 mm). All painted parts have anenvironmentally friendly silver finish powder coat.

‘


89010013 92KM G; 97N; 97N/KM; 97H/8; 97H/KM 277 x 317 x 115 2.4 141.00

‘

Spray can and paper roll holderSDH 921coated with environmentally friendlysilver-coloured textured powder-coat.

‘


81483001 92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 1 37.00

‘

Empty tray for small components912with compartments for small partssuch as screws, nuts etc. Oil and Skydrol resistant. 8 compartments each 60 x 80 mmor 80 x 80 mm,2 compartments each 100 x 165 mm or 50 x 330 mm.‘

RCode for No mm g €‘

83812070 92KM G; 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 520 x 340 x 30 330 17.40

‘

Cover913Oil and Skydrol resistant.

‘

RCode for No mm g €‘

89010011 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 680 x 450 x 20 936 41.70

‘

Multi-purpose worktop913/1Particularly sturdy construction withrobust, two-part handle-bar. Large worktop and 11 holes forstoring e.g. screwdrivers, files,scrapers etc. additionalcompartments for small componentsand 2 round recesses for cans. 4 additional holes for mounting themultifunctional back panel No 913/3. Oil and Skydrol resistant.

‘


89010022 94N; 94N/KM; 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 780 x 540 x 35 3.1 69.50

‘

Additional tray913/2slots into and extends themultipurpose worktop No 913/1.Oil and Skydrol resistant.

‘


89010023 97N; 97N/KM; 97H/8; 97H/KM; 920; 922N 443 x 540 x 35 2.2 124.00

‘

19

1

Tool boxesTool box, 3 trays83/010

lockable by padlock.

‘

W H D RCode mm mm mm kg €‘

81060000 420 150 200 3.7 44.80‘

W = Width, H = Height, D = Depth‘

Tool box, 5 trays83/09lockable by padlock.

‘


81050000 420 200 200 4.7 57.00‘


Tool box, 5 trays446/08lockable by padlock.

‘


81070000 530 200 200 5.59 68.00‘


Tool box82/013with lift out tray.Lockable by padlock.

‘


81080000 545 225 180 6.9 112.00‘


What accessories are available for each Tool Trolley, Tool Box and Mobile Workbench?

No 97

N/6KM

No 97

N/6

No 97

N/7KM

No 97

N/7

No 97

N/8KM

No 97

N/8

No 97

H/8KM

No 97

H/8

No 97

H/10K

MNo

94N/K

M

No 92

0

No 92

2N

No 92KM G

Acce

ssor

ies

No 94

N

DrawersSCH 60 • • • • • • • • •SCH 80 • • • • • • • • • • •SCH 100 • • • • • • • • •SCH 120 • • • • • • • • • •SCH 140 • • • • • • •Drawers withplastic handlesSCH 60KM • • • • • • • • •SCH 80KM • • • • • • • • • • •SCH 100KM • • • • • • • • •SCH 120KM • • • • • • • • • •SCH 140KM • • • • • • •Drawer separatorsVE 50-150 • • • • • • • • • • • • • •Magazine drawer920C-SCH • • • • • • • • • • • • • •Tool magazines920 C 60 • • • • • • • • • •920 C 80 • • • • • • • • • •920 C 120 • • • • • • • • • • •Empty tray for smallcomponents 912 • • • • • • • • • • • • • •Worktops913 • • • • • • • • • • • • •913/1 • • • • • • • • • • • • •Multifunctional back panel913/3 (only in conjunction with 913/1) • • • • • • • • • • • • •Additional tray913/2 • • • • • • • • • • • • •Set of wheelsR 920 • • • • • • • • • •Rubbish binAB 97N • • • • • • • • • •Spray can holdersSDH 921 • • • • • • • • • • • • • •Lockable personal boxPB 98 • • • • • • • • • •

with 4 drawers, a compartment underthe lid (each 449 x 55 x 185 mm),safety lock and sturdy texturedaluminium sheeting on the lid. Wide, spring-mounted dip-coatedcarrying handles on the sides. High-grade, fully extendible sturdyrails. Easily removable drawers.The perforated panel can bearranged as required using springloaded clips No 8050 (page 21,please orderseparately).

20


1

13216/3 Tool boxwith 3 drawers and onecompartment under the lid (each 449 x 55 x 185 mm), safety lock and dip-coated carryinghandle on the lid. Wide, spring-mounted dip-coatedcarrying handles on the sides. High-grade, fully extendible sturdyrails. Easily removable drawers.The perforated panel can bearranged as required using springloaded clips No 8050 (page 21,please order separately).

‘


81091003 510 365 230 11 379.00‘


13216/4 Tool box

‘


81091004 510 415 230 14 449.00‘


Non-slip mat GRIPMAT910protects the tools, prevents themsliding and rattling.1 roll will normally be sufficient for atool trolley with up to 7 drawers.

‘

L W RCode mm mm g €‘

89010003 3800 370 680 36.70‘

L = Length, W = Width‘

Perforated panels, hooks andholding devices

Perforated panel8002Perforation 9 x 9 mm, made of sturdy,1 mm thick sheet steel, with 2 strengthening ribs at rear. These ribs carry the holes for wallmounting panel.For the individual mounting of tools, on a variety of hooks and clipsNo 8031–8041.

‘


80020001 500 1000 15 4 111.00‘


Workshop cabinet with hooks8144with perforated panels for rear andside walls, complete with shelves.There is a spacious drawer ontelescopic rails below the shelves.The cabinet contains a range ofhooks:12 pieces No 8031 size 1, 3 pieces No 8031 size 2,1 piece No 8032 size 1, 3 pieces No 8034 size 1,7 pieces No 8035 size 1, 3 pieces No 8036 size 1,5 pieces No 8036 size 2,

12 pieces No 8036 size 3,5 pieces No 8038, 1 piece No 8041.

‘


96814407 655 800 270 21 776.00‘


13216/2 Tool box

‘


81091002 510 270 230 9 299.00‘


with 2 drawers and onecompartment under the lid (each 449 x 55 x 185 mm), safety lock and dip-coated carryinghandle on the lid. Wide, spring-mounted dip-coatedcarrying handles on the sides. High-grade, fully extendible sturdyrails. Easily removable drawers. The perforated panel can bearranged as required using springloaded clips No 8050 (page 21,please order separately).

21

1

Single hook8031for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘

RCode size mm g S €‘

80310030 1 30 13 5 2.7080310060 2 60 17 5 2.7080310090 3 90 21 5 2.70‘

Twin hook8032for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘


80320030 1 30 19 3 4.5080320060 2 60 26 3 4.50‘

Twin hook8034for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘


80340040 1 40 x 35 30 3 4.6080340050 2 50 x 40 30 3 4.75‘

Square lug8035for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘


80350017 1 17 x 35 23 3 4.6080350020 2 20 x 55 26 3 4.60‘

Spring clip8036for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘


80360012 1 12 9 6 2.4080360018 2 18 10 6 2.4080360024 3 24 14 6 2.40‘

Container8038for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘

RCode mm g S €‘

80380030 30 x 72 15 4 1.95‘

Holding device for spanners8041for perforated panel No 8002, Workshop cabinet No 8144, Mobile workbench No 92KM G and Tool trolleys No 97H/8, 97H/KM.

‘

RCode mm g S €‘

80410235 235 x 144 x 47 62 1 13.70‘

Spring clip8050for perforated panel No 8002,Workshop cabinet No 8144, Mobile workbench No 92KM G, Tool trolleys No 97H/8, 97H/KM and Tool boxes No 13216/2, No 13216/3,13216/4.

‘


81485006 6 6 28 5 6.9581485012 12 12 35 5 6.95‘

22


1

Tool cases, hard shell

Tool case, hard shell, base model13209/1sturdy aluminium frame, 2 locks,ergonomically shaped carryinghandle, robust jointed lid-prop, tool-holder panel for storing toolsfrom both sides, with 21 pocketsand integrated document pouch.ABS insert can be subdivided andincludes cover with 6 pockets.

‘


81620002 460 310 160 4.1 185.00‘


Tool case, hard shell, medium model13209/2as for No 13209/1, but with anadditional combination lock, tool-holder panel with 13 pocketsand 26 rubber-loop holders,separate document pouch in the lid,ABS inlay tray with 13 pockets and 8 rubber-loop holders.

‘


81620003 460 310 180 4.5 246.00‘


Tool case, hard shell, premium model

13209

as for No 13209/1, but with anadditional combination lock, tool-holder panel with 13 pocketsand 26 rubber-loop holders,additional tool-holder panel with 11 pockets and a smallercomponents pouch, separatedocument pouch in the lid, ABS inlay tray with 13 pockets and 8 rubber-loop holders.

‘


81620001 460 310 180 6 301.00‘


Workshop sets

Large tool set801N127 Tools

‘

RCode kg €‘

97841210 28.6 2033.20‘

No 10/12 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

‘

No 12/10Pc sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

‘


‘

No 29 sizes 10 x 11; 12 x 13; 14 x 15;16 x 18; 17 x 19; 21 x 23 mm

‘

No 35c Pkw sizes 17; 19; 22; 1/2'' D‘

No 39 400 mm (2x)No 39/1 600 mm (2x)

‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 23; 24; 25; 26;27; 28; 30; 32 mm

‘

No 51 1/2'' a sizes 13; 16 mm-5/8''; 17; 18;19 mm; 20.8 mm-13/16''; 22; 24; 27;30; 32 mm

‘

No 54 1/2'' a sizes 4; 5; 6; 8; 10; 12; 14 mm‘

No 501 1/2'' D 433 mm‘

No 504/15 1/2'' D 397 mm‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 100/8 200 mm‘

No 103 150 mm‘

No 104 120 x 4 mm‘

No 105 100 x 10 mm‘

No 4622 size 2 (1.2 x 6.5 x 125 mm); size 3 (1.2 x 8.0 x 150 mm); size 5 (2.0 x 12.0 x 200 mm)

‘

No 4628 size 2 (0.6 x 3.5 x 75 mm); size 4 (0.8 x 4.0 x 125 mm)

‘

No 4630 sizes 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 65 01 6 180‘

No 65 29 6 200‘

No 65 30 6 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 54 4 250‘

No 65 64 2 250‘

23

1

No 66 02 6 160‘

No 10670 310 mm‘

No 10676 85 x 12 x 315 mm‘

No 10960 500 g‘

No 11095/13 0.05–1 mm‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12050 300 mm‘

No 12150 200 mm‘

No 12200 145 mm‘

No 12250‘

No 12320‘

No 12375‘

No 12931 3 m‘


‘

RCode kg €‘

97840312 28.1 2146.80‘

No 12/10Pc sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;11 mm

‘

No 13/26 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 23; 24; 25;26; 27; 28; 29; 30; 32 mm

‘

No 29 sizes 10 x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19; 21 x 23 mm

‘

No 35c Pkw sizes 17; 19; 22; 1/2'' D‘

No 39 400 mm (2x)No 39/1 600 mm (2x)

‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 23; 24; 25; 26;27; 28; 30; 32 mm

‘

No 51 1/2'' a sizes 13; 16 mm-5/8''; 17; 18;19 mm; 20.8 mm-13/16''; 22; 24; 27;30; 32 mm

‘

No 54 1/2'' a sizes 4; 5; 6; 8; 10; 12; 14 mm‘

No 501 1/2'' D 433 mm‘

No 504/15 1/2'' D 397 mm‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 100/8 200 mm‘

No 103 150 mm‘

No 104 120 x 4 mm‘

No 105 100 x 10 mm‘


‘


‘

No 4630 sizes 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 65 01 6 180‘

No 65 29 6 200‘

No 65 30 6 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 54 4 250‘

No 65 64 2 250‘

No 66 02 6 160‘

No 10670 310 mm‘

No 10676 85 x 12 x 315 mm‘

No 10960 500 g‘

No 11095/13 0.05–1 mm‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12050 300 mm‘

No 12150 200 mm‘

No 12200 145 mm‘

No 12250‘

No 12320‘

No 12375‘

No 12931 3 m‘


‘

RCode kg €‘

97842613 17.8 1652.90‘


No 10a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;5/8 x 11/16; 3/4 x 7/8; 15/16 x 1''

‘

No 12/10Pc sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;11 mm

No 12a/13Pc sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 13 sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;17; 18; 19 mm

No 13a sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''‘

No 21 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 17 x 19 mm

‘

Continuation next page

24


1

No 20a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 3/4 x 7/8; 15/16 x 1''

‘

No 23/8 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 230a sizes 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8;11/16 x 3/4; 13/16 x 7/8; 15/16 x 1''

‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 23; 24; 27; 30;32 mm

No 50a 1/2'' a sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4;13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''

‘

No 501 1/2'' D 433 mm‘

No 504/15 1/2'' D 397 mm‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 100 150 mm‘

No 105 120 x 12 mm‘

No 108 150 x 4; 150 x 6 mm‘

No 4620 size 3 (1.0 x 5.5 x 100 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x 10.0 x 200 mm)

‘

No 4628 size 2 (0.6 x 3.5 x 75 mm)‘

No 4630 sizes 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 65 01 6 200‘

No 65 09 5 140‘

No 65 51 6 240‘

No 66 02 6 160‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4;5/16; 3/8''

‘

No 10970 1 lb.‘

No 12050 300 mm‘


‘

RCode kg €‘

97842714 11.8 1025.00‘

No 12/10Pc sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;11 mm

‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 15; 16;17; 18; 19; 21; 22; 24; 27; 30;32 mm

‘

No 40/13/6 1/4'' a No 40 sizes 3.5; 4; 4.5; 5; 5.5;6; 7; 8; 9; 10; 11; 12; 13 mm;No 400; 404; 405/2; 405/6; 407; 415

‘

No 50 1/2'' a sizes 10; 12; 13; 14; 15; 16; 17;18; 19; 21; 22; 24; 27; 30; 32 mm

‘

No 51 1/2'' a sizes 16 mm-5/8'';20.8 mm-13/16''

‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 100/8 200 mm‘

No 103 200 mm‘

No 105-8/6 K No 105/120 x 10 mm; No 108/150 x 2.5; 150 x 3; 150 x 4;150 x 5; 150 x 6 mm

‘

No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm)

‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 size 1; size 2‘

No 65 01 6 180‘

No 65 29 6 200‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 6 160‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 10955 35 mm O‘

No 10960 500 g‘

No 11095/20 0.05–1 mm‘

No 12251‘

No 12321‘

No 12375‘

25

1

Car tool set811N84 Tools

‘

RCode kg €‘

97841311 16.3 1066.80‘


‘


‘

No 39 400 mm (2x)‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 19; 21; 22; 23; 24; 26; 27; 30;32 mm

‘

No 51 1/2'' a sizes 16 mm-5/8'';20.8 mm-13/16''

‘

No 54 1/2'' a sizes 4; 5; 6; 8; 10; 12; 14 mm‘

No 504/15 1/2'' D 397 mm‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 100/8 200 mm‘

No 103 150 mm‘

No 104 120 x 4 mm‘

No 105 100 x 10 mm‘


‘


‘

No 4630 sizes 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 65 01 6 180‘

No 65 29 6 200‘

No 65 30 6 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 54 4 250‘

No 65 64 2 250‘

No 66 02 6 160‘

No 10670 310 mm‘

No 10676 85 x 12 x 315 mm‘

No 10960 500 g‘

No 12375‘

Electrician tool set302778 Tools

‘

RCode kg €‘

97843101 6.3 933.10‘

No 13 sizes 6; 7 mmNo 13/9 sizes 9; 10; 11; 12; 13; 14; 17; 19;

22 mm‘

No 40/23/6N 1/4'' a No 40 sizes 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13; 14 mmNo 41K sizes 0.6 x 3.5; 1 x 5.5; 1.2 x 8 mmNo 44K: 3; 4; 5; 6; 8 mmNo 44P: sizes 1; 2; 3; 4No 400; 404; 405/2; 405/6; 407; 415

‘

No 46 3/8'' a sizes 12; 20.8 mm‘

No 4600 3/8'' a size 16 mm‘

No 425 3/8'' D 165 mm‘

No 428 3/8'' D a 46 mm‘

No 427/6 3/8'' D a 160 mm‘


‘

No 4630 size 1; size 2‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10546 size 3‘

No 10551 size 1 x 2‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 7756 3–48 Volt‘

No 65 01 5 180‘

No 65 29 5 160‘

No 65 30 5 160‘

No 65 51 6 240‘

No 66 02 6 140‘

No 66 22 5 160‘

No 10641‘

No 10956 O 35 mm‘

No 1551 for contact sizing y 2.8 mm‘

No 1552 for contact sizing y 5.8 mm‘

No 1560 Content:1 Piece No 1501 ejection tool forcontact sizing O 1.5 mm1 Piece No 1502 ejection tool forcontact sizing O 3.5 mm1 Piece No 1503 ejection tool forcontact sizing O 4.0 mm ABS (trucks)resp. mounting bush No 15232 Pieces No 1511 dismounting bushO 1.5 mm (1 Piece assembled)2 Pieces No 1512 dismounting bushO 3.5 mm (1 Piece assembled)2 Pieces No 1513 dismounting bushO 4.0 mm1 Piece No 1523 mounting bush (ABS)

‘

26


1

Tool sets for aerospace industry

Basic tool set for aircraft mechanics(piston engine)

13200a

178 Tools

‘

RCode kg €‘

97846011 15 2739.65‘

No 12a/13Pc sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;25/32; 13/16; 7/8; 15/16; 1''

‘

No 230a sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16;7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4;13/16 x 7/8; 15/16 x 1''

‘

No 4025 size 4‘

No 40aD/30/7QR 1/4'' a No 40a: size 1/8''No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 40aDL: sizes 5/32; 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 402a: sizes 1/4; 9/32; 5/16; 11/32; 3/8;7/16; 1/2'' No 400QR; 405/2QR (2x); 405/6QR;407QR; 412; 415 SG-QR

‘

No 409 3/8'' D 1/4'' a‘

No 415SGB 1/4'' b‘

No 46a 3/8'' a sizes 7/16; 1/2; 9/16; 5/8''‘

No 427/18 3/8'' D a 455 mm‘

No 431 1/4'' D 3/8'' a‘

No 45a/22/8QR 3/8'' a No 45a: sizes 1/4; 5/16; 11/32; 3/8;7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8;11/16; 3/4'' No 427/10QR; 427/6QR; 427/3QR;428QR; 435SG-QR; 442; 443; 453

‘

No 1220 size 0No 1221 size 1No 1222 size 2No 1223 size 3

‘

No 13010 sizes 0; 1; 2; 3; 4; 5; 6; 8; 10‘

No 4006/1 1/4'' b‘

No 12503 1/4'' b‘

No 4622 size 1 (1.0 x 5.5 x 100 mm);size 3 (1.2 x 8.0 x 150 mm);size 4 (1.6 x 10.0 x 175 mm)

‘

No 4632 sizes 1; 2; 3‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

No 65 01 5 180‘

No 65 10 5 190‘

No 65 31 5 170‘

No 65 51 6 240‘

No 65 75 1 280‘

No 66 00 5 180‘

Construction machinery set841N129 tools, recommended Tool box No 94N, p. 16

‘

RCode kg €‘

97841418 35.9 1968.80‘

No 10/9 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19;20 x 22; 21 x 24 mm

‘

No 14 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24; 27; 30;32; 34; 36 mm

‘

No 40/13/6 1/4'' a No 40 sizes 3.5; 4; 4.5; 5; 5.5;6; 7; 8; 9; 10; 11; 12; 13 mm;No 400; 404; 405/2; 405/6; 407; 415

‘

No 50/16/6 1/2'' a No 50: sizes 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 21; 22; 24; 27; 30;32 mmNo 506; 509/5; 509/10; 506; 510;512

‘

No 504/15 1/2'' D 397 mm‘

No 514 3/4'' D 1/2'' a‘

No 55/9/6N 3/4'' a No 55: sizes 32; 34; 36; 38; 41;46; 50; 55; 60 mmNo 552; 554; 556; 558; 559/8;559/16

‘

No 568 1/2'' D 3/4'' a‘

No 102-5/6Pc No 104/120 x 2; 120 x 4 mmNo 105/120 x 10 mmNo 106/125 mm; 150 mmNo 107/125 mm

‘

No 4840 sizes 1; 2‘

No 4891 r 4820: 0.6 x 3.5 x 75 mm0.8 x 4.0 x 100 mm1.0 x 5.5 x 125 mm1.2 x 6.5 x 150 mm

k 4830: sizes 1; 2‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 01 5 180‘

No 65 31 5 170‘

No 65 63 2 250‘

No 65 67 2 280‘

No 65 72 6 240‘

No 66 00 5 160‘

No 10956 O 35 mm‘

No 10960 300; 500 g‘

No 11095/20 20 blades 0.05–1 mm‘

No 12050 300 mm‘

No 12050R 10 blades ‘

No 12374‘

No 12600 1800 g‘

No 12931 3 m‘

27

1


‘

No 10670 215 mm‘

No 10955 O 27 mm‘

No 10960 300 g‘

No 12320‘

No 12321‘

No 12600 500 g‘

No 12900‘

No 12921N O 50 mm‘

No 12922E O 6 mm‘

No 12931 3 m‘

No 13110 300 mm‘

No 13126‘

No 13135‘

Standard aircraft maintenance tool set13205a131 Tools

‘

RCode kg €‘

97846012 7.8 1758.55‘

No 12a/13Pc sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4''

‘

No 230a sizes 5/16 x 11/32; 3/8 x 7/16; 7/16 x 1/2;1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4''

‘

No 4025 size 4‘

No 409 3/8'' D 1/4'' a‘


‘

No 1161–1166 0.5 x 4; 0.6 x 3.5; 0.6 x 4.5; 0.8 x 4;0.8 x 5.5; 1 x 5.5 mm

‘

No 1220–1223 sizes 0; 1; 2; 3‘

No 13008 sizes 0; 1; 2; 3; 4; 5‘

No 13010 sizes 0; 1; 2; 3; 4; 5; 6; 8; 10‘

No 4006/1 1/4'' b‘

No 12503 1/4'' b‘


‘

No 4632 sizes 1; 2; 3‘

No 65 01 5 180‘

No 65 10 5 190‘

No 65 31 5 170‘

No 65 51 6 240‘

No 65 75 1 220‘

No 66 00 5 180‘


‘

No 10955 O 27 mm‘

No 10960 300 g‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 250 mm‘

No 12053‘

No 12321‘

No 12900N‘

No 12921N O 40 mm‘

No 13110 300 mm‘

No 13126‘

Electricians set in tool caseNo 13209

13207a

111 Tools

‘

RCode kg €‘

98810322 12.5 1585.20‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4''

‘

No 12a/13Pc sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 40a 1/4'' a sizes 1/8; 5/32''‘

No 400QR 1/4'' D 150 mm‘

No 40aD/12/7QR 1/4'' a No 40a: size 1/8''No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16'' No 400QR; 405/2QR (2x); 405/6QR;407QR; 412; 415SG-QR

‘

No 4006/1 1/4'' b‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm); size 3 (0.6 x 3.5 x 100 mm); size 5 (1.0 x 5.5 x 125 mm); size 6 (1.2 x 6.5 x 150 mm)

‘

No 4665 VDE sizes 0; 1; 2‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

No 65 01 5 160, No 65 01 5 180‘

No 65 24 5 160‘

No 65 29 5 200‘

No 65 30 5 200‘

No 65 31 5 170‘

No 65 55 5 125‘

No 65 76 5 231‘

No 66 00 5 130‘


28


1

Electronics set in tool case No 1320913210101 Tools

‘

RCode kg €‘

98810301 10.7 1661.50‘

No 13 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13;14 mm

No 13a sizes 3/16; 7/32; 1/4; 3/8; 1/2''‘

No 16 sizes 3.2; 3.5; 4; 4.5; 5 mm‘

No 4025 size 4‘

No 4621 size 5 (1.2 x 8.0 x 160 mm)‘

No 4630 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm); size 4 (0.8 x 4.0 x 100 mm); size 6 (1.2 x 6.5 x 150 mm)

‘


‘

No 4753 i sizes 0.7; 0.9; 1.3 mm‘

No 4797 r 4751: 0.3 x 1.5; 0.4 x 2; 0.4 x 2.5;0.5 x 3 mm l 4752: No 00; No 0; No 1

‘


‘

No 10554 220–250 Volt‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

No 10765 sizes 2; 2.5; 3; 4 mm‘

No 12500N sizes 6; 7 mm‘

No 018/3‘

No 109 sizes 1; 2; 3; 4; 5; 6; 7; 8‘

No 65 01 5 160‘

No 65 11 5 135‘

No 65 32 5 170‘

No 65 36 5 160‘

No 66 04 6 110‘

No 66 06 6 130‘

No 66 23 5 160‘

No 12900‘

No 10971‘

No 12921N O 50 mm‘

No 13100‘

No 13135‘

Drip oiler‘

Magnetic lifter‘

Electronics tweezers‘

Electronics tweezers‘

Extractor hook set‘

Test equipment set for safety applications‘

No 66 02 5 180‘

No 66 23 5 160‘


‘

No 10960 300 g‘

No 12053‘

No 12320‘

No 12600 500 g‘

No 12921N O 40 mm‘

No 12922E O 6 mm‘

No 12941‘

No 13008 sizes 0; 1; 2; 3; 4; 5‘

No 13010 sizes 0; 1; 2; 3; 4; 5‘

No 13126‘

No 13130‘

No 13131‘

No 13209‘

Board case for aircraft in tool caseNo 13209

13208a

57 Tools

‘

RCode kg €‘

98810323 8.9 846.55‘

No 13a sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2''‘

No 4025 sizes 4; 6; 8‘

No 1220 size 0No 1221 size 1No 1222 size 2No 1223 size 3

‘

No 13008 sizes 0; 1; 2; 3; 4; 5; 6‘

No 13010 sizes 0; 1; 2; 3; 4; 5; 6; 8; 10‘

No 4006/1 1/4'' b‘


‘

No 4632 sizes 1; 2; 3‘

No 10760aCV/13 sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

No 65 01 5 180‘

No 65 10 5 190‘

No 65 51 6 240‘

No 65 76 5 231‘

No 66 00 5 180‘

No 12320‘

No 13126‘

No 13209‘

29

1

Universal soldering iron‘

Solder‘

Solder removing pump, antistatic‘

Blade holders with blades‘

Lamp extractor‘

Magnifying glass‘

2 Screwdrivers‘

Tweezers‘

Stripper‘

Set of soldering tools‘

Solder removing wire‘

Hand vice‘

Inspection mirror, insulated, O 40 mm‘

No 13209‘

Sheetmetal set13211a53 Tools‘

RCode kg €‘

97846008 9 801.80‘

No 10a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16''‘

No 13a sizes 7/32; 11/32''‘

No 230a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16''‘

No 4025 size 8‘

No 442 1/4'' b 3/8'' aNo 443 5/16'' b 3/8'' a

‘

No 453 3/8'' D‘

No 103 150 mm‘

No 104-5/6D No 104/120 x 2; 120 x 3; 120 x 4;120 x 5; 120 x 6 mmNo 105/120 mm

‘

No 104 120 x 8 mm‘

No 108/6D No 108/150 x 2.5; 150 x 3; 150 x 4;150 x 5; 150 x 6; 150 x 8 mm

‘


‘

No 4630 sizes 1; 2; 3‘

No 4734 size 2‘

No 65 01 6 180‘

No 65 64 2 175‘

No 66 02 6 160‘

No 10670 265 mm‘

No 10955 32 mm O‘

No 10970 3/4; 1 1/2 lb.‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 260 mm‘

No 12050 465 mm‘

No 12200 145 mm‘

No 12378‘

No 12752R‘

No 12800‘

No 12900N‘

No 12931 3 m‘

No 13110 300 mm‘

Engine mechanics set13213a130 Tools

‘

RCode kg €‘

97846010 12.1 2350.55‘

No 13a sizes 19/32; 5/8; 11/16; 3/4''No 130a sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

‘

No 24 sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16;1/2 x 9/16; 5/8 x 3/4''

‘

No 230a sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16;7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 5/8 x 3/4;11/16 x 3/4''

‘

No 405 1/4'' D a sizes 10; 14‘

No 413 1/4'' D‘

No 415SGB 1/4'' b‘


‘

No 45a/22/8QR 3/8'' a No 45a: sizes 1/4; 5/16; 11/32; 3/8;7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1'' No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8;11/16; 3/4'' No 427/10QR; 427/6QR; 427/3QR;428QR; 435SG-QR; 442; 443; 453

‘

No 109 sizes 1; 2; 3; 4; 5‘


‘

No 4631 sizes 1; 2‘

No 4632 sizes 1; 2; 3‘

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4;5/16; 3/8''

‘

No 65 16 5 200‘

No 65 31 5 170‘

No 65 51 6 240‘


30


1

No 405QR/2 1/4'' D a 54 mm ‘

No 405QR/6 1/4'' D a 150 mm ‘

No 407QR 1/4'' D a 38 mm ‘

No 409M 3/8'' D 1/4'' a‘

No 415QR 1/4'' D‘

No 415SGB 1/4'' b‘

No 412 1/4'' b a‘

No 45 3/8'' a sizes 15; 17; 19; 21; 22; 24mm

‘

No 46 3/8'' a sizes 15; 17; 19; 21 mm‘

No 427QR/3 3/8'' D a 76 mm ‘

No 427QR/10 3/8'' D a 240 mm ‘

No 428QR 3/8'' D a 46 mm ‘

No 431 1/4'' D 3/8'' a‘

No 432M 1/2'' D 3/8'' a‘

No 435QR 3/8'' D‘

No 443 5/16'' b 3/8'' a‘

No 453 3/8'' D‘

No 4000‘

No 104 120 x 2; 120 x 3; 120 x 4;120 x 5 mm

‘

No 109 sizes 2; 5 ‘


‘

No 4632 sizes 1; 2; 3 ‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 16 5 200‘

No 65 32 5 170‘

No 65 51 6 240‘

No 65 64 2 175‘

No 65 75 1 220‘

No 66 00 5 160‘

No 10956 O 35 mm ‘

No 10960 500 g ‘

No 11095/20 0.05–1 mm ‘

No 12053‘

No 12320‘

No 12321‘

No 12600 270 g ‘

No 12900‘

No 12921N O 50 mm ‘

No 12922E O 6 mm‘

No 12931 3 m ‘

No 13126‘

No 8050 size 6 (4x); size 12 (6x) ‘

No 13216/4‘

Line maintenance set in tool boxNo 13216/4

13214

xö Ufor maintenance on aeroplanes and helicopters,121 Tools‘

RCode kg €‘

98814803 27.5 2620.70‘

No 13 sizes 5.5; 6; 7; 8; 9; 10; 12; 13; 14;15; 17; 19; 20; 21; 22; 24; 27; 30 mm

‘

No 16 sizes 3.2; 3.5; 4; 4.5; 5 mm‘

No 25 sizes 7 x 8; 9 x 10; 12 x 13;17 x 19 mm

‘

No 40 1/4'' a sizes 4; 4.5 mm‘

No 40D 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 40L 1/4'' a size 4.5 mmNo 40DL 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;

12; 13; 14 mm‘

No 402 1/4'' a sizes 6; 7; 8; 9; 10 mm‘

No 65 75 1 220‘

No 66 00 5 160‘

No 10960 300 g‘

No 11097/22 4–25/1000''‘

No 12600 500 g‘

No 12900N‘

No 12921N O 50 mm‘

31

1

Line maintenance set in tool boxNo 13216/4

13214a

xöfor maintenance on aeroplanes and helicopters,122 Tools

‘

RCode kg €‘

98814801 27.2 2596.35‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8''

‘

No 25a sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16;1/2 x 9/16''

‘

No 40aD 1/4'' a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;3/8; 7/16; 1/2; 9/16''

‘

No 40aDL 1/4'' a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;3/8; 7/16; 1/2; 9/16''

‘

No 402a 1/4'' a sizes 1/4; 5/16; 3/8; 7/16; 1/2''‘

No 405QR/2 1/4'' D a 54 mm‘

No 405QR/6 1/4'' D a 150 mm‘

No 407QR 1/4'' D a 38 mm‘

No 409M 3/8'' D 1/4'' a‘

No 415QR 1/4'' D‘

No 415SGB 1/4'' b‘

No 412 1/4'' b a‘

No 45a 3/8'' a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;15/16; 1''

‘

No 46a 3/8'' a sizes 5/8; 11/16; 3/4; 7/8''‘

No 427QR/3 3/8'' D a 76 mm‘

No 427QR/10 3/8'' D a 240 mm‘

No 428QR 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432M 1/2'' D 3/8'' a‘

No 435QR 3/8'' D‘

No 443 5/16'' b 3/8'' a‘

No 453 3/8'' D‘

No 4000‘

No 104 120 x 2; 120 x 3; 120 x 4;120 x 5 mm

‘

No 109 sizes 2; 5‘


‘

No 4632 sizes 1; 2; 3‘

No 10767a/13 sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

‘

No 65 16 5 200‘

No 65 32 5 170‘

No 65 51 6 240‘

No 65 64 2 175‘

No 65 75 1 220‘

No 66 00 5 160‘

No 10956 O 35 mm‘

No 10960 500 g‘

No 11095/20 0.05–1 mm‘

No 12053‘

No 12320‘

No 12321‘

No 12600 270 g‘

No 12900‘

No 12921N O 50 mm ‘

No 12922E O 6 mm‘

No 12931 3 m‘

No 13126‘

No 8050 size 6 (4x); size 12 (6x)‘

No 13216/4‘

32


1

Line maintenance set13214a WW

xöfor maintenance on aeroplanes and helicopters, 122 Tools, in TCS inlays(Tool Control System see page 44–59), 4x3/3 inlays for 4 drawers, suitablefor Workbench No 92KM G, Tool trolley 97N, 97N/KM, 97H/8; 97H/KM;Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely boxNo 922N.

‘

RCode kg €‘

97830802 12.54 2054.35‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8''

‘

No 25a sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16;1/2 x 9/16''

‘

No 40aD 1/4'' a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;3/8; 7/16; 1/2; 9/16''

‘

No 40aDL 1/4'' a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;3/8; 7/16; 1/2; 9/16''

‘

No 402a 1/4'' a sizes 1/4; 5/16; 3/8; 7/16; 1/2''‘

No 405QR/2 1/4'' D a 54 mm‘

No 405QR/6 1/4'' D a 150 mm‘

No 407QR 1/4'' D a 38 mm‘

No 409M 3/8'' D 1/4'' a‘

No 415QR 1/4'' D‘

No 415SGB 1/4'' b‘

No 412 1/4'' b a‘

No 45a 3/8'' a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;15/16; 1''

‘

No 46a 3/8'' a sizes 5/8; 11/16; 3/4; 7/8''‘

No 427QR/3 3/8'' D a 76 mm‘

No 427QR/10 3/8'' D a 240 mm‘

No 428QR 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432M 1/2'' D 3/8'' a‘

No 435QR 3/8'' D‘

No 443 5/16'' b 3/8'' a‘

No 453 3/8'' D‘

No 4000‘

No 104 120 x 2; 120 x 3; 120 x 4;120 x 5 mm

‘

No 109 sizes 2; 5‘


‘

No 4632 sizes 1; 2; 3‘

No 10767a/13 sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;5/32; 3/16; 7/32; 1/4; 5/16; 3/8''

‘

No 65 16 5 200‘

No 65 32 5 170‘

No 65 51 6 240‘

No 65 64 2 175‘

No 65 75 1 220‘

No 66 00 5 160‘

No 10956 O 35 mm‘

No 10960 500 g‘

No 11095/20 0.05–1 mm‘

No 12053‘

No 12320‘

No 12321‘

No 12600 270 g‘

No 12900‘

No 12921N O 50 mm ‘

No 12922E O 6 mm‘

No 12931 3 m‘

No 13126‘

96 83 08 85 96 83 08 86

96 83 08 87 96 83 08 88


Standard – the perfectly organised workshop

1

33

Tool trays from STAHLWILLE ensure perfect tool

management within the Tool Trolley or Tool Box.

All the tools are neatly arranged and instantly at

hand, and always securely held in the same

place. The Tool Trolley or Tool Box can be

equipped as required with 1/6, 1/3, 2/3 or

3/3 inlays.

Wherever large numbers of tools are in constant

use and rapid, unhindered access is paramount,

the inlays in this tried-and-tested modular

STAHLWILLE system provide the security and

efficiency required for smooth workflows and

reliable quality.

The drawers of the Tool Trolleys can be optimally

used if a number of spare inlays are kept in store

to enable the perfect “for task” combination of

tools. In addition, these inlays are made of

skydrol resistant and permanently oil resistant

engineering plastic and the sculpted cutouts

protect your high-grade, expensive tools.

Proven in practice – over and over again: our TCS and Standard inlays will all fit the CONVERTA system

34


1

No 10 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;24 x 27; 30 x 32 mm

‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)size 5 (1.6 x 8.0 x 175 mm)

‘

No 4630 sizes 1; 2; 3‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

No 10956 O 35 mm‘

No 10960 500 g‘

Tool sets in plastic inlays forWorkbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8,97H/KM; Tool boxes No 94N, 94N/KM; Magazine case No 920 and Wheely box No 922N (Modular system)

Tool set806/1099 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N,94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

RCode kg €‘

98830001 13.35 1054.50‘

96 83 81 26 96 83 81 27

96 83 81 28 96 83 81 10

96 83 81 12 96 83 81 13

96 83 82 37 96 83 81 21

96 83 81 23 96 83 81 25

35

1

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/6 3/8'' D a 160 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 435 3/8'' D‘


‘

No 4622 size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm);size 3 (1.2 x 8.0 x 150 mm)

‘

No 4632 sizes 1; 2; 3‘

No 65 01 5 200‘

No 65 29 5 160‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

No 102 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

No 10956 O 35 mm‘

No 10970 1 lb.‘


1/6 tray(175 x 175 mm)

2/3 tray(350 x 350 mm)

1/3 tray(175 x 350 mm)

3/3 tray(530 x 350 mm)

Tool set808/9102 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N,94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

RCode kg €‘

98830002 11.7 1052.80‘

No 10 sizes 5.5 x 7; 8 x 10; 10 x 12;11 x 13; 12 x 14; 14 x 17; 17 x 19;18 x 21; 19 x 22; 22 x 24 mm

‘

No 14 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

96 83 81 30 96 83 81 05

96 83 81 06 96 83 81 10

96 83 81 11 96 83 82 38

96 83 81 32 96 83 81 24

96 83 81 31

36


1

ES 10/10, 5.5x7–22x24 mm

175 x 350 x 60 mm, 10 pieces‘

RCode g €‘

96838130 1100 78.25‘


‘

83812033 Empty tray 106 8.10‘

ES 10/10, 6x7–30x32 mm

175 x 350 x 70 mm, 10 pieces‘

RCode g €‘

96838126 1515 78.35‘


‘

83812022 Empty tray 112 8.15‘

ES 13/10, 6–15 mm

175 x 350 x 40 mm, 10 pieces‘

RCode g €‘

96838127 525 82.40‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15 mm

‘

83812023 Empty tray 105 8.15‘

ES 13/8, 16–24 mm

175 x 350 x 54 mm, 8 pieces‘

RCode g €‘

96838128 1440 119.95‘

No 13 sizes 16; 17; 18; 19; 20; 21; 22; 24 mm‘

83812024 Empty tray 112 8.15‘

ES 13/5, 27–32 mm

530 x 350 x 30 mm, 5 pieces‘

RCode g €‘

96838104 2280 150.40‘

No 13 sizes 27; 28; 29; 30; 32 mm‘

83812040 Empty tray 287 21.60‘

ES 14/10, 6–15 mm

175 x 350 x 39 mm, 10 pieces‘

RCode g €‘

96838105 700 87.45‘

No 14 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15 mm

‘

83812034 Empty tray 110 8.15‘

ES 14/8, 16–24 mm

175 x 350 x 51 mm, 8 pieces‘

RCode g €‘

96838106 1820 122.95‘

No 14 sizes 16; 17; 18; 19; 20; 21; 22; 24 mm‘

83812035 Empty tray 112 8.15‘

ES 20/8, 6x7–19x22 mm

175 x 350 x 30 mm, 8 pieces‘

RCode g €‘

96838167 1266 98.45‘

No 20 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 21;19 x 22 mm

‘

83812083 Empty tray 103 8.35‘

37

1

ES 10750/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838168 1132 90.80‘

No 10750 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

‘

No 10750 1/2 sizes 6; 7‘

83812084 Empty tray 103 8.35‘

ES 10751/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838169 1586 210.25‘


‘

No 10750 1/2 sizes 6; 7‘

83812084 Empty tray 103 8.35‘

ES 20/10, 6x7–30x32 mm

530 x 350 x 44 mm, 10 pieces‘

RCode g €‘

96838107 2620 152.90‘


‘

83812044 Empty tray 309 21.60‘

ES 24/7, 8x10–19x22 mm

175 x 350 x 30 mm, 7 pieces‘

RCode g €‘

96838171 835 123.55‘

No 24 sizes 8 x 10; 10 x 11; 11 x 13;12 x 14; 14 x 17; 17 x 19; 19 x 22 mm

‘

83812086 Empty tray 103 8.35‘

ES 25/7, 7x8–17x19 mm

175 x 350 x 30 mm, 7 pieces‘

RCode g €‘

96838108 1040 154.55‘

No 25 sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;14 x 15; 16 x 18; 17 x 19 mm

‘

83812038 Empty tray 111 8.15‘

ES 29/6, 8x9–18x19 mm

175 x 350 x 30 mm, 6 pieces‘

RCode g €‘

96838109 1185 198.35‘


‘

83812041 Empty tray 105 8.15‘

ES TX/32

175 x 350 x 40 mm, 32 pieces‘

RCode g €‘

96838166 931 249.15‘

No 21TX sizes E6 x E8; E10 x E12; E14 x E18;E20 x E24

‘

No 45TX 3/8'' a sizes E8; E10; E12; E14‘

No 50TX 1/2'' a sizes E16; E18; E20‘

No 412 1/4'' b a‘

No 442 1/4'' b 3/8'' a‘

No 543 5/16'' b 1/2'' a‘

No 1440 size T10No 1441 size T15No 1442 size T20No 1443 size T25No 1444 size T27No 1445 size T30

‘

No 1432 size T40No 1433 size T45No 1434 size T50

‘

No 10766/9 sizes T8; T9; T10; T15; T20; T25; T27;T30; T40

‘

83812082 Empty tray 103 8.35‘

38


1

ES 1/4'' + 10760CV

175 x 350 x 41 mm, 27 pieces‘

RCode g €‘

96838110 1035 174.25‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;12 mm

‘

83812028 Empty tray 107 8.15‘

ES 456/16/6

175 x 350 x 40 mm, 22 pieces‘

RCode g €‘

96838111 1555 230.30‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/6 3/8'' D a 160 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 435 3/8'' D‘

83812032 Empty tray 103 8.15‘

ES 52/17

175 x 350 x 47 mm, 17 pieces‘

RCode g €‘

96838112 1760 130.10‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

83812030 Empty tray 107 8.15‘

ES 1/2'' – 512/6

175 x 350 x 35 mm, 6 pieces‘

RCode g €‘

96838113 1915 137.75‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

83812029 Empty tray 110 8.15‘

ES 54/54KK

175 x 350 x 38 mm, 14 pieces‘

RCode g €‘

96838114 1630 161.25‘

No 54 1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14;17; 19 mm

‘

No 54KK 1/2'' a sizes 5; 6; 8; 10 mm‘

83812046 Empty tray 108 8.15‘

ES 54KK/5

175 x 175 x 30 mm, 5 pieces‘

RCode g €‘

96838165 505 61.90‘

No 54KK 1/2'' a sizes 5; 6; 7; 8; 10 mm‘

83812051 Empty tray 55 4.00‘

39

1

ES 1054/2054

175 x 175 x 30 mm, 6 pieces‘

RCode g €‘

96838164 900 69.00‘

No 1054 1/2'' a sizes 8; 10; 12 mmNo 2054 1/2'' a sizes 5; 6; 14 mm

‘

83812081 Empty tray 55 4.10‘

ES 54X/54TX

175 x 350 x 38 mm, 16 pieces‘

RCode g €‘

96838115 1600 198.75‘

No 54X 1/2'' a sizes M5; M6; M8; M10; M12;M14; M16

‘

No 54TX 1/2'' a sizes T20; T25; T27; T30; T40;T45; T50; T55; T60

‘

83812045 Empty tray 111 8.15‘

ES 1054/2054TX/6

175 x 175 x 30 mm, 6 pieces‘

RCode g €‘

96838163 950 84.80‘

No 1054TX 1/2'' a sizes T30; T50; T55; T60No 2054TX 1/2'' a sizes T40; T45

‘

83812081 Empty tray 55 4.10‘

ES 55/6/4

530 x 350 x 83 mm, 10 pieces‘

RCode g €‘

96838174 7875 383.00‘

No 55 3/4'' a sizes 34; 36; 41; 46; 50; 55 mm‘

No 552 3/4'' D‘

No 556 3/4'' D‘

No 558 510 mm‘

No 559/8 3/4'' D a 200 mm‘

83812089 Empty tray 298 23.40‘

ES 2309/4

175 x 175 x 40 mm, 4 pieces‘

RCode g €‘

96838162 1145 113.90‘

No 2309 1/2'' a sizes 17; 19; 20.8 mm-13/16'';22 mm

‘

83812080 Empty tray 55 4.10‘

ES 2309K/3

175 x 175 x 30 mm, 3 pieces‘

RCode g €‘

96838260 800 105.10‘

No 2309K 1/2'' a sizes 17; 19; 20.8 mm-13/16''‘

83812080 Empty tray 55 4.10‘

40


1

ES 721/15/3/2

530 x 350 x 40 mm, 6 pieces‘

RCode g €‘

96838172 5012 529.90‘

No 2309K 1/2'' a sizes 17; 19; 20.8 mm-13/16''‘

No 721/15 30–150 N m‘

No 35c cars 17; 19; 22; D 1/2''‘

No 10599/2 245 mm‘

83812087 Empty tray 299 22.30‘

ES 4620/4628/4630/7

175 x 350 x 39 mm, 7 pieces‘

RCode g €‘

96838236 530 48.65‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2‘

83812101 Empty tray 98 8.15‘

ES 4620/4630/8

175 x 350 x 39 mm, 8 pieces‘

RCode g €‘

96838237 770 66.70‘

No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm);size 5 (1.6 x 8.0 x 175 mm)

‘

No 4630 sizes 1; 2; 3‘

83812102 Empty tray 111 8.15‘

ES 4620/4622/4632/8

175 x 350 x 39 mm, 8 pieces‘

RCode g €‘

96838238 770 78.30‘


‘

No 4622 size 1 (1.0 x 5.5 x 100 mm); size 2 (1.2 x 6.5 x 125 mm);size 3 (1.2 x 8.0 x 150 mm)

‘

No 4632 size 1; 2; 3‘

83812102 Empty tray 111 8.15‘

ES 4622–4734/9

175 x 350 x 39 mm, 9 pieces‘

RCode g €‘

96838234 865 84.20‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4632 sizes 1; 2‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

83812103 Empty tray 100 8.15‘

ES 4622SK/4632SK/6

175 x 350 x 39 mm, 6 pieces‘

RCode g €‘

96838219 770 77.80‘

No 4622SK size 1 (0.8 x 4.0 x 90 mm); size 2 (1.0 x 5.5 x 100 mm); size 3 (1.2 x 6.5 x 125 mm); size 4 (1.2 x 8.0 x 150 mm)

‘

No 4632SK sizes 1; 2‘

83812106 Empty tray 111 8.15‘

41

1

ES 4650/9

175 x 350 x 39 mm, 9 pieces‘

RCode g €‘

96838217 645 79.90‘

No 4650 sizes T8; T9; T10; T15; T20; T25; T27;T30; T40

‘

83812104 Empty tray 100 8.15‘

ES 4656/9

175 x 350 x 39 mm, 9 pieces‘

RCode g €‘

96838218 645 93.60‘


‘

83812104 Empty tray 100 8.15‘

ES 4660/4665 VDE/6

175 x 350 x 39 mm, 6 pieces‘

RCode g €‘

96838235 525 51.50‘


‘

No 4665 VDE sizes 1; 2‘

83812105 Empty tray 99 8.15‘

ES 4820/4830/6

175 x 350 x 33 mm, 6 pieces‘

RCode g €‘

96838134 480 52.90‘

No 4820 0.6 x 3.5 x 75 mm;0.8 x 4.0 x 100 mm;1.0 x 5.5 x 125 mm;1.2 x 6.5 x 150 mm

‘

No 4830 sizes 1; 2‘

83812066 Empty tray 111 8.10‘

ES 4820/4830/8

175 x 350 x 30 mm, 8 pieces‘

RCode g €‘

96838135 735 78.00‘

No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm;1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm;1.6 x 8.0 x 175 mm

‘

No 4830 sizes 1; 2; 3‘

83812068 Empty tray 110 8.40‘

ES 4856/9

175 x 350 x 30 mm, 9 pieces‘

RCode g €‘

96838136 705 107.10‘


‘

83812067 Empty tray 110 8.35‘

ES 12500N/7

175 x 350 x 39 mm, 7 pieces‘

RCode g €‘

96838200 1060 96.00‘

No 12500N sizes 7; 8; 9; 10; 11; 12; 13 mm‘

83813085 Empty tray 103 8.35‘

ES 10768/6

350 x 350 x 37 mm, 6 pieces‘

RCode g €‘

96838119 780 62.40‘

No 10768 sizes 3; 4; 5; 6; 8; 10 mm‘

83812042 Empty tray 209 15.80‘

42


1

ES 10769/7

175 x 350 x 35 mm, 7 pieces‘

RCode g €‘

96838120 450 54.80‘

No 10769 sizes T10; T15; T20; T25; T27; T30;T40

‘

83812043 Empty tray 116 8.15‘

ES 10769B/7

175 x 350 x 35 mm, 7 pieces‘

RCode g €‘

96838129 450 56.55‘

No 10769B sizes T10; T15; T20; T25; T27; T30;T40

‘

83812043 Empty tray 116 8.15‘

ES 6501–6602/7A

530 x 350 x 40 mm, 7 pieces‘

RCode g €‘

96838121 2085 172.70‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

83812021 Empty tray 307 22.50‘

ES 6501–6602/7B

530 x 350 x 40 mm, 7 pieces‘

RCode g €‘

96838132 2055 169.30‘

No 65 01 5 200‘

No 65 29 5 160‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

83812021 Empty tray 307 22.50‘

ES 6543–6546/4

175 x 350 x 30 mm, 4 pieces‘

RCode g €‘

96838122 700 77.45‘

No 65 43 4 002‘

No 65 44 4 021‘

No 65 45 4 002‘

No 65 46 4 021‘

83812037 Empty tray 109 8.05‘

ES 102/108/109/4

175 x 350 x 30 mm, 4 pieces‘

RCode g €‘

96838123 555 45.35‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

83812027 Empty tray 115 8.15‘

43

1

ES 102/105/108/8

175 x 350 x 33 mm, 8 pieces‘

RCode g €‘

96838124 900 60.35‘

No 102 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

83812036 Empty tray 114 8.15‘

ES 10670–13110/11

530 x 350 x 35 mm, 11 pieces‘

RCode g €‘

96838173 2120 159.95‘

No 10670 265 mm‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 260 mm‘

No 12050 465 mm‘

No 12320‘

No 12321‘

No 12377‘

No 12931 3 m‘

No 13110 300 mm‘

83812088 Empty tray 301 22.30‘

ES 10956/10960/2

175 x 350 x 45 mm, 2 pieces‘

RCode g €‘

96838125 1130 46.95‘

No 10956 O 35 mm‘

No 10960 500 g‘

83812025 Empty tray 114 8.15‘

ES 10956/10970/2

175 x 350 x 45 mm, 2 pieces‘

RCode g €‘

96838131 1075 51.55‘

No 10956 O 35 mm‘

No 10970 1 lb.‘

83812025 Empty tray 114 8.15‘

Empty inlay175 x 350 x 30 mm

‘

RCode g €‘

83812047 110 8.15‘

Empty inlay175 x 175 x 28 mm

‘

RCode g €‘

83812080 55 4.10‘


Tool Control System – built-in safety!

1. The sculpted cut-outs for each tool are individuallyshaped using computer technology to provide eachtool with a secure place. Easy to remove thanks toadditional recesses. 4. Two-layer, two-colour

plastic inlays: the upperhalf is black and thelower layer is yellow.

3. The inlays arechemical-resistant andextremely flexible.

2. The sculpted cut-outsenable you to see at aglance where each toolgoes. Saves time andmoney.

Initially, the TCS Tool Control System was

developed by STAHLWILLE in conjunction with

British Aerospace MAD for the aerospace

industry with a view to improving safety. Today,

the system is appreciated by employees in the

automotive industry and other fields of industry

and the trades for its convincing benefits. The

system guarantees a high level of organisation

and security, protects high-grade, expensive tools

from damage and is ideal wherever large

numbers of tools are prone to “disappear” – in

other words, a real value-for-money investment

that will soon pay for itself.

The advantages at a glanceWith our Tool Control System, the tools are

arranged in chemical-resistant special foam

inlays with sculpted three-dimensional cut-outs.

The signal colour is yellow. A glance is enough

to see whether all tools are in their correct

places: if you can see yellow, there is

something missing.

1

44

45

1

Tool sets in TCS inlays for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8,97H/KM, Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N

TCS tool set806/9 TCS

xö98 Tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3,1x2/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G,Tool trolleys No 97N, 97N/KM, 97H/8; 97H/KM; Tool boxes No 94N,94N/KM, Magazine case No 920 and Wheely box No 922N.

‘

RCode kg €‘

98830004 12.53 1135.15‘


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘


‘

No 4630 sizes 1; 2; 3‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

No 10956 O 35 mm‘

No 10960 500 g‘

96 83 81 75 96 83 81 76

96 83 81 77 96 83 82 78

96 83 81 79 96 83 81 80

96 83 81 81

96 83 81 83 96 83 81 82

Tool Control SystemThe safety inlay system

Designed to fit our Tool Trolleys and Tool Boxes

With yellow signal cut-outs to show whether all tools arein their places

46


1

TCS 10/10, 6x7–30x32 mm

xö

350 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838182 1414 96.80‘


‘

TCS 10/10, 6x7–30x32 mm MF

xö175 x 350 x 75 mm, 10 pieces‘

RCode g €‘

96830353 1437 96.45‘

No 10 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm

‘

TCS 10/10, 6x7–24x27 mm

xö

175 x 350 x 66 mm, 10 pieces‘

RCode g €‘

96838187 1287 84.90‘


‘

TCS 10/10, 6x7–24x27 mm MF

xö175 x 350 x 66 mm, 10 pieces‘

RCode g €‘

96830358 1320 89.50‘


‘

TCS 10+13+24/30

xö

530 x 350 x 75 mm, 30 pieces

‘

RCode g €‘

96830605 3724 351.45‘

No 10 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;21 x 24 mm

‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 21; 22; 24; 27; 30;32 mm

‘

No 24 size 10 x 11 mm‘

TCS 10a/9

xö

175 x 350 x 70 mm, 9 pieces‘

RCode g €‘

96838779 1555 108.05‘

No 10a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;19/32 x 11/16; 5/8 x 3/4; 3/4 x 7/8; 25/32 x 13/16;15/16 x 1; 1 1/8 x 1 5/16''

‘

TCS 13/18, 6–24 mm

xö

530 x 350 x 35 mm, 18 pieces‘

RCode g €‘

96838183 1850 217.25‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

47

1

TCS 13/17, 6–24 mm

xö

350 x 350 x 60 mm, 17 pieces‘

RCode g €‘

96830164 1615 198.35‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘

TCS 13/17, 6–24 mm MF

xö

350 x 350 x 60 mm, 17 pieces‘

RCode g €‘

96830351 1552 207.35‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘

TCS 13/21, 6–34 mm

xö

530 x 350 x 75 mm, 21 pieces‘

RCode g €‘

96830174 3571 318.95‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30; 32;34 mm

‘

TCS 13/25, 5.5–34 mm

xöU530 x 350 x 75 mm, 25 pieces‘

RCode g €‘

96832096 4550 399.30‘

No 13 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13;14; 15; 16; 17; 18; 19; 20; 21; 22; 23;24; 27; 29; 30; 32; 34 mm

‘

TCS 12+13+14/29

xö

530 x 350 x 80 mm, 29 pieces‘

RCode g €‘

96830193 3752 389.65‘

No 12 sizes 5.5; 12; 14 mm (2x)‘

No 13 sizes 7; 11 mm (2x);6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm(1x)

‘

No 14 size 17 mm‘

TCS 13a/19

xö

350 x 350 x 55 mm, 19 pieces‘

RCode g €‘

96838778 2000 255.80‘

No 13a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16;1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8;15/16; 1''

‘

48


1

TCS 13a/23

xö

530 x 350 x 55 mm, 23 pieces‘

RCode g €‘

96830885 2726 332.65‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8''

‘

TCS 14/5, 17–21 mm

xö175 x 350 x 30 mm, 5 pieces‘

RCode g €‘

96838188 1065 86.40‘

No 14 sizes 17; 18; 19; 20; 21 mm‘

TCS 14/8, 8–16 mm


RCode g €‘

96838189 660 87.90‘

No 14 sizes 8; 10; 11; 12; 13; 14; 15; 16 mm‘

TCS 20/8, 6x7–19x22 mm


RCode g €‘

96838192 1300 108.70‘


‘

TCS 20/8, 6x7–19x22 mm MF


RCode g €‘

96830356 1323 113.30‘


‘

TCS 20/10; 6x7–30x32 mm

xö

350 x 350 x 45 mm, 10 pieces‘

RCode g €‘

96830166 2450 162.50‘


‘

TCS 25/7


RCode g €‘

96838751 984 165.50‘


‘

TCS 29/7, 8x9–20x22 mm


RCode g €‘

96830195 1520 258.10‘


‘

49

1

TCS 1/4'' + 10760CV

xö175 x 350 x 43 mm, 27 pieces‘

RCode g €‘

96838176 987 184.70‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;12 mm

‘

TCS 40/41/44/8

xö175 x 350 x 40 mm, 33 pieces‘

RCode g €‘

96830217 715 258.00‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4‘

No PZ 1221 1/4'' E, l size 1No PZ 1222 1/4'' E, l size 2

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409 3/8'' D 1/4'' a‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

TCS 40/35/9

xö175 x 350 x 40 mm, 44 pieces‘

RCode g €‘

96830601 1045 416.85‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 40L 1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4 mm‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 409 3/8'' D 1/4'' a‘

TCS 456/16/7

xö175 x 350 x 40 mm, 23 pieces‘

RCode g €‘

96830218 1400 248.80‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

50


1

TCS 456/16/4 MF

xö175 x 350 x 45 mm, 20 pieces‘

RCode g €‘

96830357 1123 222.15‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 435 3/8'' D‘

TCS 456/31/8

xö

350 x 350 x 32 mm, 39 pieces‘

RCode g €‘

96830602 2701 658.15‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 46 3/8'' a sizes 10; 11; 12; 13 mm‘

No 47 3/8'' a sizes 10; 11; 12; 13; 14; 15; 16 mm

‘

No 1049 3/8'' a size 9 mm‘

No 49X 3/8'' a sizes M6; M8; M10‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 452 3/8'' D‘

TCS 1/2''-512/6


RCode g €‘

96838175 1845 148.20‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

TCS 1/2''-512/9


RCode g €‘

96830603 2364 187.40‘

No 506 1/2'' D 300 mm‘

No 509QR/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509QR/10 1/2'' D a 255 mm (2x)‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 514 3/4'' D 1/2'' a‘

51

1

TCS 50/52/30/6 MF

xö

350 x 350 x 70 mm, 36 pieces‘

RCode g €‘

96830354 4604 399.00‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 30 mm

‘

No 52 1/2'' a sizes 12; 13; 17; 18; 19; 20; 21;22; 24; 27; 30; 32; 34 mm

‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12 mm‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

TCS 50/51/52/32

xö175 x 350 x 50 mm, 32 pieces‘

RCode g €‘

96838191 2950 265.20‘

No 50 1/2'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 30 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 51 1/2'' a sizes 22; 27 mm‘

TCS 52/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838177 1605 140.55‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

TCS 52/18 MF

xö175 x 350 x 55 mm, 18 pieces‘

RCode g €‘

96830359 1850 159.15‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32; 34 mm

‘

TCS 50a/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838780 1600 161.15‘

No 50a 1/2'' a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8;11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 11/8; 1 3/16; 1 1/4''

‘

TCS 50TX/54TX/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838763 1382 202.15‘

No 50TX 1/2'' a sizes E10; E11; E12; E14; E16;E18; E20; E24

‘


‘

52


1

TCS 40/456/52/78/19


RCode g €‘

96832095 7000 977.40‘

No 40 1/4'' a sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11; 12; 13 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 456 3/8'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 49 3/8'' a sizes 5; 6; 8 mm‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 21; 22; 24; 27; 30; 32;34 mm

‘

No 54 1/2'' a sizes 10; 12 mm‘

No 40TX 1/4'' a sizes E8; E10‘

No 44KTXB 1/4'' a sizes T8; T10; T15; T20; T25;T27; T30; T40

‘

No 45TX 3/8'' a Gr. E8; E10; E12; E14‘

No 49TX 3/8'' a sizes T25; T45No 54TX 1/2'' a sizes T40; T50; T55; T60

‘

No 1054TX 1/2'' a sizes T50; T55No 2054TX 1/2'' a size T40; T45

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

TCS 40/45/50/89/19

xö

530 x 350 x 70 mm, 108 pieces‘

RCode g €‘

96830192 8000 1119.75‘

No 40 1/4'' a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8;9; 10; 11; 12; 13 mm

‘

No 44 1/4'' a sizes 3; 4; 5; 6 mm‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409M 3/8'' D 1/4'' a‘

No 415 1/4'' D‘

No 45 3/8'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19 mm

‘

No 46 3/8'' a sizes 20.8 mm-13/16''‘

No 49 3/8'' a sizes 4; 5; 6; 7; 8; 10 mm‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 432M 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 50 1/2'' a sizes 19; 21; 22; 24; 27; 30; 32 mm

‘

No 52 1/2'' a sizes 16; 17; 18; 19; 22; 24; 27;30; 32 mm

‘

No 54 1/2'' a sizes 6; 7; 8; 10 mm‘

No 54X 1/2'' a sizes M6; 8; 12; 14‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 514M 3/4'' D 1/2'' a‘

No 40TX 1/4'' a sizes E4; E5; E6; E7; E8No 45TX 3/8'' a sizes E10; E12; E14

‘

No 50TX 1/2'' a sizes E11; E16; E18; E20; E24‘

No 54TX 1/2'' a sizes T45; T50; T55; T60‘

No 1410 size T6No 1411 size T7No 1412 size T8No 1413 size T9No 1440 size T10No 1441 size T15No 1442 size T20No 1443 size T25No 1444 size T27No 1445 size T30No 1446 size T40No 1427 size T25 (65 mm)

‘

No 415SGB 1/4'' b‘

53

1

TCS 54/2309K/12506

xö175 x 350 x 40 mm, 13 pieces‘

RCode g €‘

96830163 1830 214.10‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17;19 mm

‘

No 2309K 1/2'' a sizes 17; 19 mm‘

No 12506 sizes 6; 7 mm‘

TCS 54/54X/16

xö175 x 350 x 35 mm, 16 pieces‘

RCode g €‘

96838762 1665 191.80‘

No 54 1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14;17 mm

‘


‘

TCS TX/57 MF N

xö

350 x 350 x 75 mm, 57 pieces‘

RCode g €‘

96830450 2060 490.95‘


‘


‘

No 49TX 3/8'' a sizes T40; T45‘

No 50TX 1/2'' a sizes E16; E18; E20; E24‘

No 54TX 1/2'' a sizes T50; T55; T60‘

No 415SGB 1/4'' b‘

No 412 1/4'' b a‘

No 442 1/4'' b 3/8'' a‘


‘

No 4650 sizes T6; T7; T8; T9; T10; T15; T20;T25; T27; T30

‘

No 10766 sizes T6; T7‘


‘

TCS 55/11/6

xö

530 x 350 x 90 mm, 17 pieces‘

RCode g €‘

96830221 10100 556.00‘

No 55 3/4'' a sizes 22; 24; 27; 30; 32; 34; 36;38; 41; 46; 50 mm

‘

No 552 3/4'' D‘

No 556 3/4'' D‘

No 558 510 mm‘

No 559/8 3/4'' D a 200 mmNo 559/16 3/4'' D a 400 mm

‘

No 568 1/2'' D 3/4'' a‘




54


1

TCS 4620/4630


RCode g €‘

96838278 490 65.65‘


‘

No 4630 sizes 1; 2; 3‘

TCS 4620/4660VDE+10767

xö

530 x 350 x 35 mm, 27 pieces‘

RCode g €‘

96831168 2080 206.35‘

No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm);size 4 (1.2 x 6.5 x 150 mm);size 5 (1.6 x 8.0 x 175 mm);size 6 (1.6 x 10.0 x 200 mm);size 7 (2.0 x 12.0 x 200 mm)

‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2No 4744 size 1

‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

TCS 4620/4660VDE

xö

530 x 350 x 40 mm, 18 pieces‘

RCode g €‘

96831179 1689 180.55‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

TCS 4621/4734/16


RCode g €‘

96832098 1490 218.45‘

No 4621 size 0 (0.4 x 2.5 x 80 mm); size 1 (0.5 x 3.5 x 90 mm);size 2 (0.6 x 4.0 x 100 mm);size 4 (1.0 x 6.5 x 140 mm);size 5 (1.2 x 8.0 x 160 mm)

‘

No 4631 size 1; 2‘

No 4632 size 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10506 0.8 x 4.0 x 300 mm‘

No 10518 1.0 x 5.5 x 410 mm‘

No 12600 500 g‘

No 12922E O 6 mm‘

55

1

TCS 4622/4650+10760+10766

xö

530 x 350 x 40 mm, 36 pieces‘

RCode g €‘

96831196 1895 238.00‘

No 4622 size 1 (1.0 x 5.5 x 100 mm);size 2 (1.2 x 6.5 x 125 mm);size 4 (1.6 x 10.0 x 175 mm);size 5 (2.0 x 12.0 x 200 mm)

‘

No 4630 size 1‘

No 4632 size 3‘


‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘


‘

TCS 4650

xö

175 x 350 x 35 mm. 8 pieces‘

RCode g €‘

96838767 350 83.75‘

No 4650 sizes T8; T9; T10; T15; T20; T25; T27;T30

‘

TCS 4660/4665

xö

175 x 350 x 40 mm, 6 pieces‘

RCode g €‘

96838766 400 65.85‘


‘

No 4665 VDE size 1; 2‘

TCS 4820/4830


RCode g €‘

96838184 555 75.40‘


‘

No 4830 sizes 1; 2; 3‘

TCS 4856


RCode g €‘

96838755 447 88.45‘

No 4856 sizes T8; T9; T10; T15; T20; T25; T30‘

TCS 4724/4840+10767

xö

530 x 350 x 45 mm, 24 pieces‘

RCode g €‘

96830706 1755 255.30‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

No 4820 0.6 x 3.5 x 75 mm;0.8 x 4.0 x 100 mm;1.2 x 6.5 x 150 mm;1.6 x 10.0 x 200 mm;2.0 x 12.0 x 250 mm

‘

No 4830 sizes 1; 2; 3No 4840 size 1

‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 7756‘

No 12922E O 6 mm‘

56


1

TCS 10765/10768/12507/19

xö

530 x 350 x 30 mm, 19 pieces‘

RCode g €‘

96830621 1640 150.30‘

No 10765/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 10768 sizes 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 12507-2K sizes 8; 10; 13 mm‘

TCS 10769+10771/17


RCode g €‘

96832099 940 138.70‘

No 10769 sizes T9; T10; T15; T20; T25; T30;T40; T45; T50

‘

No 10771/8 sizes T9; T10; T15; T20; T25; T27;T30; T40

‘

TCS 6501–6602/4


RCode g €‘

96838179 1010 114.40‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 51 6 240‘

No 66 02 5 160‘

TCS 6501–6602/4N


RCode g €‘

96830622 1080 128.30‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 72 6 240‘

No 66 02 5 160‘

TCS 6543–6564/3


RCode g €‘

96838180 815 73.00‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 64 2 250‘

TCS 6543–6546/4


RCode g €‘

96830608 626 88.00‘

No 65 43 4 002‘

No 65 44 4 021‘

No 65 45 4 002‘

No 65 46 4 021‘

57

1

TCS 6534–6545/6


RCode g €‘

96832100 1070 147.80‘

No 65 34 5 280‘

No 65 35 5 200‘

No 65 43 4 001No 65 43 4 002

‘

No 65 45 4 001No 65 45 4 002

‘

TCS 102–109/10956/10960/6


RCode g €‘

96838181 1500 94.60‘

No 10956 O 35 mm‘

No 10960 500 g‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

TCS 102–108/10960/10

xö175 x 350 x 40 mm, 10 pieces‘

RCode g €‘

96830361 1569 102.25‘

No 102 200 mm‘

No 105 120 x 12 mm‘

No 108 115 x 2; 150 x 3; 150 x 4; 150 x 5;150 x 6; 175 x 4; 200 x 8 mm

‘

No 10960 500 g‘

TCS 102-108/11

xö175 x 350 x 33 mm, 11 pieces‘

RCode g €‘

96838754 1665 108.05‘

No 102 150; 200; 250 mm‘

No 105 120 x 10; 120 x 12 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

TCS 102–108/10957/12718/13

xö

530 x 350 x 40 mm, 13 pieces‘

RCode g €‘

96830226 3730 222.60‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8; 200 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500; 800 g‘

No 12718‘

TCS 102–108/10957/10960 MF

xö

530 x 350 x 40 mm, 12 pieces‘

RCode g €‘

96830355 3343 216.60‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500; 800 g‘

No 12718‘

58


1

TCS 102–108/10957/10960/13

xö

530 x 350 x 60 mm, 13 pieces‘

RCode g €‘

96830177 5540 249.75‘

No 102 200; 300 mm‘

No 103 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 50 mm‘

No 10960 500; 800; 1000 g‘

TCS 102–108/10957/10960/16

xö

530 x 350 x 45 mm, 16 pieces‘

RCode g €‘

96830609 3715 265.85‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500 g‘

No 12373‘

No 12600 500 g‘

No 12718‘

No 12931 3 m‘

No 65 64 2 250‘

No 39 cars 400 mm‘

TCS 102–108/10956/10960/18

xö

530 x 350 x 55 mm, 18 pieces‘

RCode g €‘

96830620 3653 249.15‘

No 102 150 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

No 10956 O 50 mm‘

No 10960 300; 500 g‘

No 10356‘

No 10670 285 mm‘

No 10672 20 x 315 mm‘

No 12374‘

No 12900N‘

No 12965‘

TCS 12025–13110/11

xö

530 x 350 x 35 mm, 11 pieces‘

RCode g €‘

96838759 2070 185.25‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 260 mm‘

No 12050 300 mm‘

No 12320‘

No 12321‘

No 12718‘

No 12931 3 m‘

No 12965‘

No 13110 300 mm‘

59

1

TCS 13126/13127/2


RCode g €‘

96830014 475 188.30‘

No 13126‘

No 13127‘

TCS 1/3 MF

xö175 x 350 x 30 mm, empty inlay‘

RCode g €‘

83820360 30 23.20‘

Display unit8003S220 cm high, 100 cm wide, black,RAL 9005, on request available ingreen RAL 6024 and light grey RAL 7035.

Consists of:5 steel pegboards 100 x 40 cm,1 base plate light grey,2 base supports with adjusting

screws, 100 hooks 170 x 9 mm,plastic coated,

25 hooks 170 x 6 mm,plastic coated

Without columns and light unit(please order separately: columnNo 8024, single, or No 8029,2 columns, and light unit No 8023L)

‘

RCode No kg €‘

80030010 8003S 38.5 Price on request80240000 8024 (1 column) 6 Price on request80290000 8029 (2 columns) 12 Price on request80230110 8023L (light unit) 8.5 Price on request‘

Accessories for display unitsSteel display tray for smallcomponents

8043

Consisting of:1 base 100 x 47 cm, RAL 7035,

made in one piece with groovesfront and back

1 pair hook-on supports for fixingtray to perforated panel,depth 47 cm, RAL 7035

2 dividers, clear plastic, for compartmented tray grooves, 100 x 7.5 cm8 toothed dividers clear plastic, 47 x 7.5 cm5 cross dividers, clear plastic, 8.4 x 7.5 cm

25 cross dividers, clear plastic, 16.8 x 7.5 cm1 price rail, plastic, 100 cm1 protective film for price rail

‘


88100111 1000 80 470 11.6 Price on request‘


Cover for steel display tray8043/1protects against dust and pilfering,for steel display tray No 8043

‘


88100110 1005 35 450 4.6 Price on request‘


Light unit8023Lwith connecting cable

‘

RCode kg €‘

80230110 8.5 Price on request‘

Light unit available on request with slogan in other languages‘

Angle bracket with cover8023-21 pair, for Light unit 8023L

‘

RCode kg €‘


Angle holder8023-3Holder for two Light units 8023Lmounted side-by-side

‘

RCode kg €‘


60


1

Column8024without base support,black RAL 9005

‘

L RCode cm kg €‘

80240000 220 6 Price on request‘

2 Columns8029without base supports,black RAL 9005

‘



Column extension8024-1for extending the Column from 220 to 260 cm

‘


80240001 50 1.6 Price on request‘

Base support8025for column

‘

RCode kg €‘

80250000 3 Price on request‘

Steel pegboard8026S100 x 40 cm, black RAL 9005,on request available ingreen RAL 6024 and light grey RAL 7035

‘

RCode kg €‘


Base plate8027metal, light grey RAL 7035

‘

RCode kg €‘


Drawer8042for storing larger parts under thebase plate.Steel sheet, light grey,W 100 x H 18 x D 47 cm

‘

RCode kg €‘


Plastic coated hook801525 pieces,55 x 6 mm

‘

RCode g €‘



‘

RCode g €‘


61

1


‘

RCode g €‘


Pliers/wrench hook8022N

‘

RCode g €‘


Toothed divider804447 x 7.5 cm,for flexible arrangement ofcompartments in the display tray

‘

RCode g €‘


Cross divider804516.8 x 7.5 cm,for flexible arrangement ofcompartments in the display tray

‘

RCode g €‘


Cross divider80468.4 x 7.5 cm,for flexible arrangement ofcompartments in the display tray

‘

RCode g €‘


Corner display unit, 90°8004SConsists of:5 steel pegboards, left, 40 cm

high, black RAL 9005, 5 steel pegboards, right, 40 cm

high, black RAL 9005.On request available in greenRAL 6024 and light grey RAL 7035,

1 base plate, metal, light grey RAL7035.

1 base support with adjustingscrews.

Without columns and cornercover(please order separately columnNo 8024, single, or No 8029,2 columns, and cover No 8023-4)

‘

D W H D RCode mm mm mm mm kg €‘

80040010 950 660 2200 850 33.5 Price on request‘

D = Diagonal, W = Width of pegboard, H = Height, D = Depth‘

Cover8023-4for use with Corner display unitNo 8004S.

‘

RCode kg €‘


Cover available on request with slogan in other languages‘

Display standsDisplay stand for pliersST 11

for 72 pairs of pliers, matt blacklacquered, three-tier design.Counter or wall display.Supplied without pliers.

‘


82080001 500 200 380 4.5 Price on request‘


62


1

SERVOMAT display stand forsockets

ST 97

free standing or for hanging on pegboards, variable configurationpossible for sockets with 1/4, 3/8 and 1/2''u square drive.Display Stand is delivered with17 dividing elements.Further dividing elements can be orderedfor an individual arrangement.Details: sheet metal, green painted, with acryl-glass cover,660 x 250 x 200 mm.Supplied without sockets.

‘

RCode g S €‘


Standard partitionsST 97R/1201

for SERVOMAT ST 97

‘

RCode partition height g S €‘

88130001 12 mm, straight 20 10 Price on request‘


for SERVOMAT ST 97

‘


88130002 12 mm, bent 22 10 Price on request‘


for SERVOMAT ST 97

‘


88130003 22 mm, straight 40 10 Price on request‘


for SERVOMAT ST 97

‘


88130004 22 mm, bent 41 10 Price on request‘

2

1

2

Absolutely resistant to bending thanks to the double-T profile

Open-jaw spannersin oil

64

Conventional spanners When force is applied to a spanner, the greatestforce acts on the joint between the jaw and theshaft. Standard-quality open-jaw spanners do not take this fact into consideration. In the contextof normal hard work, this can lead to the tool breaking, causing considerable personal injury.

STAHLWILLE spannersTo reduce the danger of breakage, we add morematerial where the greatest loads are to be foundand take it away from the places that are notunder such stress. In this way, we are able to manufacture extremely sturdy, slim and light toolswhich also facilitate working in confined spacesdue to their compact designs.

Extremely resilient, remarkably durable

Drop-forged from high-grade special steels

Optimum hardening in continuous furnaceswith no scale build-up or skin decarburisation

Gentle quenching in oil

STAHLWILLE spanners

Concentrated force

More resilient than any screw

Rings are thinner than conventional rings,facilitating work in confined spaces

Light and easy to handle

High resistance to bending and low weight thanksto STAHLWILLE's typical double-T profile

Snug-fitting, skin-friendly surfaces thanks toSTAHLWILLE's rounded finish

Load zones in standard-quality spanners

Load zones in spanners by STAHLWILLE

Nm

2000

1900

1800

1700

1600

1500

1400

1300

1200

1100

1000

900

800

700

600

500

400

300

200

100

06

3,585

106

138

1610

17*10

1812

19*12

2114

22*14

2416

2718

3020

32*22

3422

3624

4127

Nm

2000

1900

1800

1700

1600

1500

1400

1300

1200

1100

1000

900

800

700

600

500

400

300

200

100

06

3,585

106

138

1610

17*10

1812

19*12

2114

22*14

2416

2718

3020

32*22

3422

3624

4127

Size/thread (M) * Reference to older screw thread standards

65

Quality assuredSTAHLWILLE's Quality Assurance System wasawarded an internationally recognised certificatein accordance with DIN ISO 9001 by the DQS (German Association for the Certification of QualityAssurance Systems).

Strong, extremely tough and durable

STAHLWILLE No 8 striking face double hexbox-spanners are tougher,thinner and higher.

Key benefits when tightening and loosening screwsTougher than any screw thanks to the forged double hex.Thinner than conventional rings – facilitating work in confined spaces.Higher than standard nuts – prevents the spanner jamming on the nut.

This one – and the next one:tailored to fit

This one – and the next one:perfect chrome plating

Test results for STAHLWILLETest results to DIN 899 or ISO 1711Clamping torque for 8.8 screwsat 100 % tensile yield strength (μ = 0,14)

Test results for STAHLWILLETest results to DIN 899 or ISO 1711Clamping torque for 12.9 screwsat 100 % tensile yield strength (μ = 0,14)

Guaranteed test resultsSTAHLWILLE combination spannersNo 13 (open-jaw)

Guaranteed test resultsSTAHLWILLE combination spannersNo 13 (ring)

66

Spanners

2

Double open ended spanners10DIN 3110, ISO 10102 (metric sizes), Chrome Alloy Steel, chrome plated.

‘

A L b1 b2 a RCode mm mm mm mm mm g S €‘

40030405 4 x 5 100 12.5 14 3.4 11 10 4.7040035507 5.5 x 7 120 14.8 17 3.7 19 10 4.7040030607 6 x 7 120 15.5 17 3.7 17 10 4.1540030708 7 x 8 140 17 18 4.0 25 10 5.001

40030809 8 x 9 140 18 21 4.0 21 10 4.5040030810 8 x 10 140 18 23 4.5 33 10 5.0040031011 10 x 11 155 23 26 4.8 40 10 4.4040031012 10 x 12 170 23 28 5.3 51 10 6.051

40031013 10 x 13 170 23 30 5.3 57 10 5.6040031113 11 x 13 170 26 30 5.3 55 10 6.3540031213 12 x 13 170 28 30 5.3 64 10 5.3540031214 12 x 14 170 28 32 5.3 63 10 6.201

40031314 13 x 14 190 30 32 5.3 70 10 6.3540031315 13 x 15 190 30 35 5.3 73 10 6.1540031317 13 x 17 205 30 38 5.8 92 10 6.6540031415 14 x 15 190 32 35 5.3 81 10 5.551

40031417 14 x 17 205 32 38 5.8 99 10 6.8040031617 16 x 17 205 36 38 5.8 100 10 6.2540031618 16 x 18 220 36 40 6.7 125 10 7.5040031719 17 x 19 220 38 42 6.7 131 10 7.051

40031819 18 x 19 220 40 42.5 6.7 147 10 7.0540031821 18 x 21 235 40 47 7.3 170 10 9.3040031922 19 x 22 235 42 49 7.3 179 10 8.7540032022 20 x 22 235 45 49 7.3 185 10 7.951

40032123 21 x 23 250 47 51 7.8 225 5 8.8540032124 21 x 24 250 47 53 7.8 215 5 10.4040032224 22 x 24 250 49 53 7.8 232 5 9.9540032426 24 x 26 270 53 57.5 8.3 293 5 11.501

40032427 24 x 27 280 53 60 8.3 299 5 10.7040032528 25 x 28 285 55 62 8.3 309 5 13.6040032730 27 x 30 300 60 66 9.4 412 5 15.5040032732 27 x 32 300 60 70 9.4 418 5 16.001

40033032 30 x 32 300 66 70 9.4 451 5 14.3040033034 30 x 34 300 66 75 9.4 480 5 17.3040033236 32 x 36 325 70 80 10 546 5 26.3040033436 34 x 36 325 75 80 10 619 1 27.301

40033641 36 x 41 375 80 88 11 800 1 34.3040034146 41 x 46 425 88 94.5 12 1030 1 49.70‘

Double open ended spanners10a‘

A L b1 b2 a RCode „ mm mm mm mm g S €‘

40431620 1/4 x 5/16 140 16 18 4 21 10 4.7540432024 5/16 x 3/8 140 18 23 4.5 34 10 5.9040432428 3/8 x 7/16 155 23 26 4.8 48 10 5.6540432832 7/16 x 1/2 170 26 30 5.3 58 10 8.001

40433234 1/2 x 9/16 190 30 32 5.3 73 10 6.9540433436 9/16 x 5/8 205 32 36 5.8 96 10 7.7540433538 19/32 x 11/16 205 35 40 5.8 105 10 8.3040433638 5/8 x 11/16 205 36 40 5.8 101 10 8.301

40433640 5/8 x 3/4 220 36 42 6.7 135 10 8.6040433840 11/16 x 3/4 220 40 42 6.7 135 10 10.1040433842 11/16 x 13/16 235 40 47 7.3 167 10 9.8040434044 3/4 x 7/8 235 42 49 7.3 177 10 10.301

40434142 25/32 x 13/16 235 45 47 7.3 190 10 10.3040434446 7/8 x 15/16 250 49 53 7.8 235 10 11.9040434648 15/16 x 1 270 53 55 8.3 303 5 13.7040435258 1 1/8 x 1 5/16 300 64 75 9.4 502 5 18.50‘

Sets: Double open ended spanners‘

Content RCode No mm/“ g €‘

96400305 10/8 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 745 45.20

96400314 10/9 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 945 55.60

96400307 10/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 1540 70.20

96400306 10/12 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 2125 92.65

1

96404306 10a/7 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16 1242 66.15

96404307 10a/11 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16 1870 102.80

‘

Standard packing: clear view wallet.‘

67

2

ES 10/10, 5.5x7–22x24 mm

175 x 350 x 60 mm, 10 pieces‘

RCode g €‘

96838130 1100 78.25‘


‘

83812033 Empty tray 106 8.10‘

ES 10/10, 6x7–30x32 mm

175 x 350 x 70 mm, 10 pieces‘

RCode g €‘

96838126 1515 78.35‘


‘

83812022 Empty tray 112 8.15‘

TCS 10/10, 6x7–30x32 mm

xö

350 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838182 1414 96.80‘


‘

TCS 10/10, 6x7–30x32 mm MF

xö175 x 350 x 75 mm, 10 pieces‘

RCode g €‘

96830353 1437 96.45‘


‘

TCS 10/10, 6x7–24x27 mm

xö

175 x 350 x 66 mm, 10 pieces‘

RCode g €‘

96838187 1287 84.90‘


‘

TCS 10/10, 6x7–24x27 mm MF

xö175 x 350 x 66 mm, 10 pieces‘

RCode g €‘

96830358 1320 89.50‘


‘

TCS 10+13+24/30

xö

530 x 350 x 75 mm, 30 pieces

‘

RCode g €‘

96830605 3724 351.45‘


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 21; 22; 24; 27; 30;32 mm

‘


68

Spanners

2

Combination spanners OPEN-BOX13

PDIN 3113 form A/ISO 7738 form A (metric sizes),Chrome Alloy Steel, chrome plated.

‘

A L b d a1 a2 RCode mm mm mm mm mm mm g S €‘

40085500 5.5 100 14.8 9.2 3.5 5.8 13 10 6.2540080606 6 105 15.5 9.9 3.6 6 15 10 6.0540080707 7 110 17 11.3 3.9 6 20 10 6.0540080808 8 115 18 12.4 4.2 7 21 10 6.101

40080909 9 120 21 13.4 4.5 7 27 10 6.8040081010 10 125 23 14.8 4.8 7 35 10 6.9040081111 11 135 26 16.4 4.8 8 43 10 7.2540081212 12 140 28 17.8 5.3 8.5 46 10 7.751

40081313 13 160 30 19.1 5.3 8.5 57 10 8.6040081414 14 165 32 20.6 5.3 8.5 68 10 8.6540081515 15 170 35 21.9 5.3 8.5 73 10 10.1040081616 16 180 36 23.2 5.8 10 89 10 10.801

40081717 17 190 38 24.6 5.8 10 99 10 11.3040081818 18 200 40 26 6.7 11.5 126 10 12.6040081919 19 230 42 27.5 6.7 11.5 142 10 13.2040082020 20 230 45 29 7 13 176 10 14.301

40082121 21 260 47 30.3 7.3 13 216 10 14.8040082222 22 260 49 31.8 7.3 13 220 10 16.1040082323 23 280 53 33.5 7.8 14 251 5 20.5040082424 24 280 53 34.9 7.8 14 254 5 18.701

40082525 25 300 55 36.3 8.4 14.5 281 5 22.3040082626 26 300 57.5 37.8 8.4 14.5 315 5 22.9040082727 27 300 60 39.2 8.4 14.5 345 5 21.2040082828 28 320 62 40.6 8.4 14.5 368 5 27.001

40082929 29 330 64 41.9 8.9 16 420 5 27.5040083030 30 330 66 43.2 8.9 16 404 5 25.3040083232 32 360 70 45.8 9.4 16.5 484 5 27.8040083434 34 450 80 48 9.4 17 683 1 41.701

40083636 36 460 88 50.8 10 18 787 1 46.4040083838 38 480 87 53.6 11 19 915 1 60.0040084141 41 480 88 57.8 11 19 1055 1 59.0040084646 46 500 94.5 65.2 13 20 1352 1 83.501

40085050 50 530 103 73 14 21 1700 1 116.0040085555 55 560 114 81 15 22 2193 1 143.0040086060 60 590 125 89.8 16 24 2825 1 184.00‘

TCS 10a/9

xö

175 x 350 x 70 mm, 9 pieces‘

RCode g €‘

96838779 1555 108.05‘

No 10a sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;19/32 x 11/16; 5/8 x 3/4; 3/4 x 7/8; 25/32 x 13/16;15/16 x 1; 1 1/8 x 1 5/16“

‘

Plastic-wallets for sets of spanners‘

wallet for set RCode No No g €‘

83400306 010/12 10/12*, 10a/11* 276 18.2083404601 012/10 12/10 Pc 41 6.5083400601 012/15 12/15 Pc, 12a/13 Pc 68 9.6083410704 023/8 23/8* 123 14.40‘

* Plastic-wallets must be ordered separately!‘

Clip holder for sets of spanners013/6KH*

‘

for set RCode No g S €‘

83400806 13/6 40 1 6.45‘

* to be discontinued‘

69

2

Combination spanners OPEN-BOX13a‘

A L b d a1 a2 RCode „ mm mm mm mm mm g S €‘

40481212 3/16 95 14 9.8 3 3.2 10 5 8.1540481313 13/64 95 14 9.8 3 3.2 10 5 8.1540481414 7/32 95 14 9.8 3 3.2 10 5 7.9540481515 15/64 95 14 9.8 3 3.2 9 5 8.301

40481616 1/4 105 15.5 10.2 3.6 6 14 10 6.8540481818 9/32 110 17 11.3 3.9 6 17 10 7.5540482020 5/16 115 18 12.4 4.2 7 20 10 7.0040482222 11/32 120 21 13.4 4.5 7 26 10 7.801

40482424 3/8 125 23 14.3 4.8 7 32 10 7.8540482828 7/16 135 26 16.4 4.8 8 41 10 8.2040483232 1/2 160 30 18.8 5.3 8.5 57 10 9.0540483434 9/16 165 32 20.6 5.3 8.5 68 10 9.801

40483535 19/32 170 35 21.9 5.3 8.5 74 10 11.7040483636 5/8 180 37 23.2 5.8 10 88 10 11.8040483838 11/16 200 40 25.3 6.7 11.5 116 10 13.2040484040 3/4 230 42 27.5 6.7 11.5 144 10 14.401

40484141 25/32 235 45 29 7 13 175 5 15.8040484242 13/16 260 47 30 7.3 13 204 5 16.2040484444 7/8 260 49 31.8 7.3 13 217 5 18.3040484646 15/16 280 53 34.9 7.8 14 255 5 20.401

40484848 1 300 55 37.2 8.4 14.5 286 5 21.5040485050 1 1/16 300 60 39.2 8.4 14.5 327 5 22.9040485252 1 1/8 330 64 41.4 8.9 16 380 5 26.8040485454 1 3/16 335 66 43.2 8.9 16.5 398 1 32.201

40485656 1 1/4 360 70 45.8 9.4 16.5 504 5 31.1040485858 1 5/16 450 74 47 9.6 17 617 1 43.4040486060 1 3/8 460 80 49.3 10 18 796 1 51.5040486262 1 7/16 460 80 51.4 10 18 770 1 51.501

40486464 1 1/2 480 87 53.6 11 19 961 1 62.5040486666 1 5/8 480 88 58 11 19 1021 1 68.0040486969 1 13/16 500 94.5 65.3 13 20 1343 1 94.5040487070 1 7/8 530 103 68.4 14 21 1779 1 111.001

40487272 2 530 103 74 14 21 1817 1 125.00‘

Sets: Combination spanners OPEN-BOX‘


96400813 13/6 3) 7; 8; 10; 13; 17; 19 457 58.6096400801 13/9 9; 10; 11; 12; 13; 14; 17; 19; 22 758 86.5596400808 13/10KT 1) 8; 9; 10; 11; 12; 13; 14; 15; 17; 19 746 92.8596400802 13/11 8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22 915 102.751

96400803 13/15 6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32 2236 189.10

96400816 13/16 2) 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 1620 165.70

96400804 13/17 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 1493 167.35

96400805 13/26 2) 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 29; 30; 32 4705 380.55

1

96404803 13a/8 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8 959 100.9596404812 13a/10KT 1) 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4 750 102.1596404804 13a/20 2) 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16;

3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 1/4 3210 288.20‘

Standard packing: clear view wallet.(Coloured plastic-wallets: page 68)1) carton with clear view cover2) packed in carton3) in convenient clip holder‘

ES 13/10, 6–15 mm

175 x 350 x 40 mm, 10 pieces‘

RCode g €‘

96838127 525 82.40‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15 mm

‘

83812023 Empty tray 105 8.15‘

STAHLWILLE AS-DriveThe rings of STAHLWILLE combination spanners and double ended ring spanners are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. Nolonger will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

70

Spanners

2

TCS 13/18, 6–24 mm

xö

530 x 350 x 35 mm, 18 pieces‘

RCode g €‘

96838183 1850 217.25‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

TCS 13/17, 6–24 mm

xö

350 x 350 x 60 mm, 17 pieces‘

RCode g €‘

96830164 1615 198.35‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘

TCS 13/17, 6–24 mm MF

xö

350 x 350 x 60 mm, 17 pieces‘

RCode g €‘

96830351 1552 207.35‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘

TCS 13/21, 6–34 mm

xö

530 x 350 x 75 mm, 21 pieces‘

RCode g €‘

96830174 3571 318.95‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30; 32;34 mm

‘

ES 13/8, 16–24 mm

175 x 350 x 54 mm, 8 pieces‘

RCode g €‘

96838128 1440 119.95‘

No 13 sizes 16; 17; 18; 19; 20; 21; 22; 24 mm‘

83812024 Empty tray 112 8.15‘

ES 13/5, 27–32 mm

530 x 350 x 30 mm, 5 pieces‘

RCode g €‘

96838104 2280 150.40‘

No 13 sizes 27; 28; 29; 30; 32 mm‘

83812040 Empty tray 287 21.60‘

TCS 13/25, 5.5–34 mm

xö

U530 x 350 x 75 mm, 25 pieces‘

RCode g €‘

96832096 4550 399.30‘

No 13 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13;14; 15; 16; 17; 18; 19; 20; 21; 22; 23;24; 27; 29; 30; 32; 34 mm

‘

71

2

TCS 12+13+14/29

xö

530 x 350 x 80 mm, 29 pieces‘

RCode g €‘

96830193 3752 389.65‘

No 12 sizes 5.5; 12; 14 mm (2x)‘

No 13 sizes 7; 11 mm (2x);6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm (1x)

‘

No 14 size 17 mm‘

TCS 13a/19

xö

350 x 350 x 55 mm, 19 pieces‘

RCode g €‘

96838778 2000 255.80‘

No 13a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16;1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8;15/16; 1“

‘

TCS 13a/23

xö

530 x 350 x 55 mm, 23 pieces‘

RCode g €‘

96830885 2726 332.65‘

No 13a sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8“

‘

Combination spanners OPEN-BOX,long

14

PDIN 3113 form B/ ISO 7738 form B, Chrome Alloy Steel, chrome plated.

‘

A L b d a1 a2 t RCode mm mm mm mm mm mm mm g S €‘

40100606 6 125 14 9.5 4.5 6 7 18 10 6.7540100707 7 135 16 10.8 5 7 8 25 10 6.7540100808 8 145 17.5 12.1 5 7 8 28 10 6.5540100909 9 155 19 13.3 5.5 8 9 34 10 7.601

40101010 10 165 21 14.6 5.5 8 9 43 10 7.2040101111 11 180 23.5 15.9 6 9 10 55 10 7.6540101212 12 180 25.5 17.3 6 9 10 61 10 8.2040101313 13 195 27.5 18.6 6.5 10 11 83 10 8.951

40101414 14 210 29.5 20.1 6.5 10 11 88 10 9.3540101515 15 215 31 21.4 7 11 13 109 10 10.3040101616 16 230 33 22.7 7 11 14 108 10 11.1040101717 17 240 35 24.1 7.5 12 15 151 10 11.701

40101818 18 255 37 25.5 7.5 12 16 151 10 13.0040101919 19 265 39.5 27 8 13 18 190 10 13.5040102020 20 280 41.5 28.5 8 13 19 219 10 14.4040102121 21 280 43 29.8 8.5 13 19 244 10 15.201

40102222 22 300 45 31.3 8.5 14 20 268 10 16.8040102424 24 330 50 34.3 9.5 14 22 363 5 19.1040102727 27 385 56 38.6 10.5 16 24 502 5 21.5040103030 30 415 63 42.6 12 18 26 645 5 26.901

40103232 32 430 67 45.2 12 18 27 666 5 28.5040103434 34 460 72 48 13 18 27 900 1 41.5040103636 36 480 74 50.8 13 19 28 951 1 48.6040104141 41 560 84 57.8 14 20 32 1322 1 61.50‘

STAHLWILLE AS-DriveThe rings of STAHLWILLE combination spanners and double ended ring spanners are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. Nolonger will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

72

Spanners

2

Sets: Combination spanners OPEN-BOX, long‘

Content RCode No mm g €‘

96401008 14/6 2) 10; 13; 17; 19; 22; 24 1175 77.2596401009 14/9 2) 10; 11; 13; 17; 19; 22; 24; 27; 30 2395 133.3096401007 14/10 KT 1) 8; 10; 11; 12; 13; 14; 16; 17; 18; 19 1235 103.2096401006 14/11 8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22 1465 107.801

96401004 14/15 6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32 3400 197.65

96401010 14/15N 2) 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30 3165 200.45

96401005 14/17 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 1874 175.00

‘

Standard packing: clear view wallet1) packed in plastic with transparent cover2) packed in carton‘

ES 14/10, 6–15 mm

175 x 350 x 39 mm, 10 pieces‘

RCode g €‘

96838105 700 87.45‘

No 14 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;15 mm

‘

83812034 Empty tray 110 8.15‘

ES 14/8, 16–24 mm

175 x 350 x 51 mm, 8 pieces‘

RCode g €‘

96838106 1820 122.95‘

No 14 sizes 16; 17; 18; 19; 20; 21; 22; 24 mm‘

83812035 Empty tray 112 8.15‘

TCS 14/5, 17–21 mm


RCode g €‘

96838188 1065 86.40‘

No 14 sizes 17; 18; 19; 20; 21 mm‘

TCS 14/8, 8–16 mm

xö

175 x 350 x 30 mm, 8 pieces‘

RCode g €‘

96838189 660 87.90‘

No 14 sizes 8; 10; 11; 12; 13; 14; 15; 16 mm‘

Combination spanners OPEN-BOX15*

PSoftGRIP®

registered design, long, DIN 3113 form B/ISO 7738 form B,Chrome Alloy Steel, chrome plated.

‘

A L b d a1 a2 t RCode mm mm mm mm mm mm mm g S €‘

40110606 6 125 14 9.5 4.5 6 7 18 10 6.4540110909 9 155 19 13.3 5.5 8 9 34 10 7.8540111010 10 165 21 14.6 5.5 8 9 45 10 8.3540111111 11 180 23.5 15.9 6 9 10 55 10 8.451

40111212 12 180 25.5 17.3 6 9 10 60 10 9.4040111515 15 215 31 21.4 7 11 13 109 10 12.2040111616 16 230 33 22.7 7 11 14 120 10 12.6040111818 18 255 37 25.5 7.5 12 16 160 10 14.201

40111919 19 265 39.5 27 8 13 18 200 10 15.2040112424 24 330 50 34.3 9.5 14 22 363 5 21.5040112727 27 385 56 38.6 10.5 16 24 484 5 24.1040113030 30 415 63 42.6 12 18 26 625 5 28.201

40113232 32 430 67 45.2 12 18 27 666 5 31.5040113434 34 460 72 48 13 18 27 900 1 48.30‘


73

2

Double ended ring spanners20

PStahlwilleSTABIL®

offset, DIN 838/ISO 10104 (metric sizes), Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a1 a2 t RCode mm mm mm mm mm mm mm g S €‘

41040607 6 x 7 165 10.5 11.8 6 7 18 46 10 8.0541040809 8 x 9 180 13.1 14.5 7 8 20 62 10 8.3041040810 8 x 10 180 13.1 15.8 7 9 21 61 10 9.6541041011 10 x 11 200 15.8 17.2 9 9 23 93 10 9.001

41041013 10 x 13 220 15.8 20 9 10 25 122 10 10.7041041213 12 x 13 220 18.6 20 9 10 25 126 10 9.6541041317 13 x 17 245 20 25.3 10 12 27 169 10 12.3041041415 14 x 15 245 21.3 22.6 10 12 27 163 10 10.401

41041617 16 x 17 255 23.9 25.3 11 12 27 181 10 11.3041041719 17 x 19 270 25.3 28 12 13 29 220 10 13.3041041819 18 x 19 275 26.6 28 12 13 29 228 10 13.1041041821 18 x 21 300 26.6 30.7 12 13 31 279 10 17.001

41041922 19 x 22 300 28 32.1 13 14 31 315 10 16.4041042022 20 x 22 300 29.4 32.1 13 14 31 317 5 15.7041042123 21 x 23 315 30.7 33.4 13 14 31 312 5 18.9041042124 21 x 24 330 30.7 34.7 13 14 34 384 5 20.301

41042224 22 x 24 330 32.1 34.7 14 14 34 368 5 19.4041042426 24 x 26 330 34.7 37.3 14 15 34 427 5 21.5041042427 24 x 27 330 34.7 38.6 14 15 34 447 5 20.2041042528 25 x 28 350 36 40 14 15 34 414 5 24.101

41042730 27 x 30 360 38.3 42.6 15 15 37 595 5 27.0041042732 27 x 32 360 39.3 47.2 15 16 37 596 5 26.0041043032 30 x 32 365 42.6 45.4 15 16 37 603 5 25.6041043034 30 x 34 365 42.6 48 15 16 37 670 1 28.801

41043641 36 x 41 440 53 60 17 18 40 1063 1 51.0041044650 46 x 50 535 65.2 73 19 20 45 1709 1 102.00‘

Double ended ring spanners20a‘

A L d1 d2 a1 a2 t RCode „ mm mm mm mm mm mm g S €‘

41441620 1/4 x 5/16 180 11.8 13.1 7 7 20 61 10 9.9041442428 3/8 x 7/16 200 15.8 17.2 9 9 23 88 10 10.8041443234 1/2 x 9/16 220 20 21.3 9 10 25 131 10 12.0041443436 9/16 x 5/8 245 21.3 25.3 10 12 27 168 10 13.301

41443538 19/32 x 11/16 255 23.9 25.3 11 12 27 177 10 14.0041443640 5/8 x 3/4 270 23.9 28 12 13 29 235 10 15.7041443842 11/16 x 13/16 300 25.3 30.7 12 13 31 280 5 18.7041444044 3/4 x 7/8 300 28 32.1 13 14 31 299 5 18.301

41444142 25/32 x 13/16 300 29.4 32.1 13 14 31 333 5 19.2041444446 7/8 x 15/16 330 32.1 34.7 14 14 34 363 5 21.9041444648 15/16 x 1 330 34.7 37.3 14 15 34 419 5 24.3041445258 1 1/8 x 1 5/16 365 42.6 45.4 15 16 37 581 1 29.10‘

Sets: Double ended ring spanners

StahlwilleSTABIL®

offset.‘


96410408 20/7N 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 930 69.80

96410405 20/8 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 1291 85.50

96410409 20/9 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 1650 105.80

96410407 20/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 2331 131.30

1

96410406 20/12 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28; 30 x 32 3137 174.30

96414402 20a/6 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16; 7/8 x 15/16 1244 89.00

96414405 20a/10 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16 2260 153.80

‘

Standard packing: carton. (Coloured plastic-wallets: page 68)‘

ES 20/8, 6x7–19x22 mm

175 x 350 x 30 mm, 8 pieces‘

RCode g €‘

96838167 1266 98.45‘


‘

83812083 Empty tray 103 8.35‘

ES 20/10, 6x7–30x32 mm

530 x 350 x 44 mm, 10 pieces‘

RCode g €‘

96838107 2620 152.90‘


‘

83812044 Empty tray 309 21.60‘

74

Spanners

2

TCS 20/8, 6x7–19x22 mm


RCode g €‘

96838192 1300 108.70‘


‘

TCS 20/8, 6x7–19x22 mm MF


RCode g €‘

96830356 1323 113.30‘


‘

TCS 20/10; 6x7–30x32 mm

xö

350 x 350 x 45 mm, 10 pieces‘

RCode g €‘

96830166 2450 162.50‘

No 20 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 21;19 x 22; 24 x 27; 30 x 32 mm

‘

12 Small double open endedspanners ELECTRIC

‘

A L b a RCode mm mm mm mm g S €‘

40063232 3.2 70 10.5 2 5 10 7.0040063535 3.5 70 10.5 2 5 10 7.0040060404 4 70 10.5 2 5 10 6.8540064545 4.5 70 10.5 2 5 10 6.851

40060505 5 78 12.6 2 7 10 6.8540065555 5.5 78 12.6 2 7 10 6.8540060606 6 78 12.6 2 6 10 6.8540060707 7 91 14.7 2 9 10 6.851

40060808 8 96 16.8 3 16 10 6.8540060909 9 103 18.9 3 19 10 6.8540061010 10 105 21 3 22 10 6.8540061111 11 116 24.2 3 27 10 7.101

40061212 12 116 24.2 3 27 10 7.6540061313 13 131 28.3 3 37 10 8.0540061414 14 131 28.3 3 36 10 9.00‘

Small double open endedspanners ELECTRIC

12a

‘

A L b a RCode „ mm mm mm g S €‘

40461010 5/32 70 10.5 2 5 10 7.3540461212 3/16 70 10.5 2 5 10 7.3540461313 13/64 78 12.6 2 7 10 7.3540461414 7/32 78 12.6 2 6 10 7.351

40461515 15/64 78 12.6 2 6 10 7.3540461616 1/4 91 14.7 2 9 10 7.3540461818 9/32 91 14.7 2 9 10 7.3540462020 5/16 96 16.8 3 16 10 7.351

40462222 11/32 103 18.9 3 19 10 7.5040462424 3/8 105 21 3 22 10 7.5040462828 7/16 116 24.2 3 28 10 7.5540463232 1/2 131 28.3 3 37 10 9.001

40463434 9/16 131 28.3 3 36 10 9.95‘

Sets: Small double open ended spanners ELECTRIC‘


96400653 12/10Pc 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 161 75.2596400651 12/15Pc 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 296 117.0596404654 12a/13Pc 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2;

9/16 270 109.90‘

Pc: in plastic-wallet‘

Chrome Alloy Steel, chrome plated.

75

2

Combination spanners130a

P QFed. Spec. GGG-W-636 E, HPQ high performance steel, chrome plated.

‘

A L b d a1 a2 RCode „ mm mm mm mm mm g S €‘

40571616 1/4 105 14.2 9.8 3.6 6 13 10 18.6040571818 9/32 110 15.5 10.9 4.1 6 16 10 18.7040572020 5/16 115 17 12 4.5 7 20 10 19.1040572222 11/32 120 19 13.1 4.9 7 25 10 20.101

40572424 3/8 125 20.5 14.1 5.2 7 32 10 23.1040572828 7/16 135 23 16.2 6 8 42 10 24.0040573232 1/2 150 27 18.2 6.5 8.5 61 10 25.0040573434 9/16 165 30.5 20.6 7 8.5 78 10 28.50‘

Spline drive combination spanners130aSP

QMS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

Spline A L b d a1 a2 RCode size „ mm mm mm mm mm g S €‘

40581616 8 1/4 105 14.2 10 3.6 5.6 13 5 18.7040582020 10 5/16 115 17 12.2 4.5 6.4 21 5 19.2040582424 12 3/8 125 20.5 14.8 5.2 7 31 5 23.2040582828 14 7/16 135 23 16.5 6 8 43 5 24.101

40583232 16 1/2 150 27 18.7 6.5 8.5 59 5 25.1040583434 18 9/16 165 30.5 20.8 7 8.5 84 5 28.00‘

16 Combination spanners OPEN-BOXISO 3318, Chrome Alloy Steel, chrome plated.

‘

A L b d a1 a2 RCode mm mm mm mm mm mm g S €‘

40093232 3.2 75 10 6.6 3 3.2 6 10 8.3040093535 3.5 75 10 6.6 3 3.2 6 10 8.3040094040 4 85 12.5 7.8 3 3.2 9 10 8.3540094545 4.5 85 12.5 7.8 3 3.2 8 10 8.351

40095050 5 95 14 9.8 3 3.2 11 10 8.35‘

Set: Combination spanners OPEN-BOX; 3.2–5 mm

16/5Pc

‘

Content RCode mm g €‘

96400902 3.2; 3.5; 4; 4.5; 5 46 42.45‘

Pc: in green plastic-wallet‘

Double ended ring spanners180a

P Qshort, shallow offset, Fed. Spec. GGG-W-636 E,S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2“,HPQ high performance steel, chrome plated.

‘

A L d1 d2 a1 a2 t1 t2 RCode „ mm mm mm mm mm mm mm g S €‘

41601620 1/4 x 5/16 107 10.2 11.8 7 8 7.2 7.4 26 10 26.1041602428 3/8 x 7/16 122 14.6 16.7 6.7 7.8 9 10 42 10 27.1041603234 1/2 x 9/16 141 18.5 20.7 8.7 9.5 11 12 62 10 29.0041603436 9/16 x 5/8 148 20.7 22.6 9.5 10.5 11.5 12.5 87 10 34.30‘

Double ended ring spanners230a

P Qshallow offset, SAE AS 954 (dimensions and test loads);Fed. Spec. GGG-W-636E, S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2“,HPQ high performance steel, chrome plated.

‘

A L d1 d2 a1 a2 t1 t2 RCode „ mm mm mm mm mm mm mm g S €‘

41611620 1/4 x 5/16 180 10.2 11.9 5.2 6 7.9 8.8 36 10 20.7041612022 5/16 x 11/32 195 11.9 13.5 7 8 8 9 45 10 23.3041612024 5/16 x 3/8 195 11.9 14.6 6 7.9 10.8 12.4 54 10 22.1041612428 3/8 x 7/16 215 14.6 16.7 7.9 8.7 11.4 11.7 74 10 22.301

41612832 7/16 x 1/2 225 16.7 19.5 8.7 9.1 11.9 12.6 105 10 23.8041613234 1/2 x 9/16 235 19.5 20.7 9.1 9.5 12.2 12.9 119 10 25.8041613436 9/16 x 5/8 245 20.7 22.6 9.5 11.5 13.8 13.9 122 10 30.0041613640 5/8 x 3/4 274 22.6 27.5 11.1 12 14.8 15.8 156 10 31.001

41613840 11/16 x 3/4 275 25.4 27.5 11.1 12 15.2 15.8 158 10 35.4041614244 13/16 x 7/8 301 29.5 31.7 13.5 14.5 19 20 175 5 39.7041614648 15/16 x 1 340 34.1 36.5 14.5 15 22 23 375 5 44.8041614850 1 x 1 1/16 368 36.5 38.6 15 16 23 24 460 5 49.201

41615256 1 1/8 x 1 1/4 403 40.8 45 16 18 25 27 620 5 52.50‘

76

Spanners

2


Pshallow offset, DIN 897/ISO 10104 (metric sizes),Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a1 a2 t1 t2 RCode mm mm mm mm mm mm mm mm g S €‘

41070607 6 x 7 170 9.5 10.8 6 7 7 8 41 10 9.7541070809 8 x 9 179 12.1 13.3 7 8 8 9 49 10 9.3041071011 10 x 11 188 14.6 15.9 8.5 9.5 9 10 66 10 9.9041071213 12 x 13 203 17.3 18.6 9.5 10.5 10 11 95 10 10.701

41071415 14 x 15 219 20.1 21.4 10.5 11.5 11 13 109 10 12.2041071617 16 x 17 248 22.7 24.1 11.5 12.5 14 15 144 10 12.8041071719 17 x 19 250 24.1 27 12.5 13.5 15 18 162 10 13.6041071819 18 x 19 251 25.5 27 12.5 13.5 16 18 157 10 14.601

41072022 20 x 22 280 28.5 31.3 13.5 14.5 19 20 223 5 17.5041072123 21 x 23 328 29.8 32.9 13.5 14.5 19 22 281 5 21.4041072427 24 x 27 376 34.3 38.6 14.5 16 22 24 426 5 22.4041073032 30 x 32 429 42.6 45.2 18 18 26 27 608 5 28.30‘

Set: Double ended ring spanners;6x7–20x22 mm

23/8

shallow offset.

‘


96410704 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 870 96.75

‘

Standard packing: carton.(Coloured plastic-wallets: page 68)‘


PStahlwilleSTABIL®

straight, DIN 837/ISO 10103, Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a RCode mm mm mm mm mm g S €‘

41050607 6 x 7 100 9.6 11 4.5 14 10 7.9541050809 8 x 9 115 12.5 14 5.5 19 10 7.9541050810 8 x 10 115 12.5 15.4 6 18 10 8.2041051011 10 x 11 130 15.4 16.6 6 28 10 8.801

41051213 12 x 13 150 18.2 19.5 6.5 42 10 9.7041051317 13 x 17 170 19.5 25 8 57 10 11.4041051415 14 x 15 165 21 22.5 7.5 55 10 10.7041051617 16 x 17 170 23.8 25 8 68 10 11.301

41051618 16 x 18* 185 23.8 26.3 8 74 10 12.4041051719 17 x 19 185 25 27.6 8 78 10 11.3041051819 18 x 19 185 26.3 27.6 9 84 10 11.9041051821 18 x 21 210 26.3 30.5 9 107 5 16.601

41051922 19 x 22 210 27.6 32.4 9 109 5 15.4041052022 20 x 22 210 29 32.4 9 109 5 14.1041052124 21 x 24 235 30.5 34.7 10 128 5 17.7041052427 24 x 27 290 34.7 38.5 11 225 5 18.501

41052732 27 x 32 320 38.5 45.5 12 283 5 25.0041053032 30 x 32 325 43 45.5 12 289 5 23.8041053034 30 x 34 325 43 48.5 12 307 5 26.60‘


StahlwilleSTABIL®

Sets: Double ended ring spanners

‘


96410503 21/7 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 397 74.45

96410501 21/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 943 124.70

‘

Standard packing: carton(Coloured plastic-wallets: page 68)‘

77

2


P Qextra long, 15° angled, SAE AS 954-E (test loads) (American sizes),HPQ high performance steel, chrome plated.

‘

A L d1 d2 a1 a2 RCode mm mm mm mm mm mm g S €‘

41035507 5.5 x 7 185 8.8 11 5.3 5.8 28 5 25.4041030608 6 x 8 205 9.8 12.1 5.6 6 34 5 27.6041030911 9 x 11 250 14.2 16.7 8 8.7 80 5 28.1041031011 10 x 11 250 15.5 16.7 8 8.7 80 5 28.101

41031214 12 x 14 290 18.3 20.7 9.5 9.5 162 5 30.3041031314 13 x 14 290 18.7 20.7 9.5 9.5 160 5 34.1041031719 17 x 19 365 25 27.5 11 12 296 5 38.1041031819 18 x 19 365 25.5 27.5 11 12 295 5 44.701

41031922 19 x 22 408 27.5 31.5 13 14.3 520 5 50.0041032022 20 x 22 409 28.5 31.5 13 14.3 515 5 54.50‘

Double ended ring spanners220a‘

A L d1 d2 a1 a2 RCode „ mm mm mm mm mm g S €‘

41431416 7/32 x 1/4 184 9 9.9 5.3 5.8 29 5 25.3041431620 1/4 x 5/16 205 9.9 12.2 5.6 6 33 5 26.3041432428 3/8 x 7/16 250 14 16 8 8.7 79 5 28.9041433234 1/2 x 9/16 290 18.5 21 9.5 9.5 160 5 34.101

41433640 5/8 x 3/4 363 22.6 27 11 12 298 5 40.4041433840 11/16 x 3/4 365 25 27 11 12 291 5 44.70‘

STAHLWILLE HPQ spannersSTAHLWILLE HPQ* spanners are manufactured from selected tough steel alloys. The result: extremely high load capacity with exceptionally thin rings. HPQ spanners are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor.*High Performance Quality

Double ended ring spanners220aSP

Qextra long, with spline-drive profile, 15° angled, MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

‘

Spline A L d1 d2 a1 a2 RCode size „ mm mm mm mm mm g S €‘

41160709 7 x 9 7/32 x 9/32 185 9.4 11.5 5.3 5.8 23 5 23.5041160810 8 x 10 1/4 x 5/16 205 10.4 12.4 5.6 6 33 5 25.6041161214 12 x 14 3/8 x 7/16 250 14.9 17 8 8.7 79 5 28.2041161618 16 x 18 1/2 x 9/16 290 19 21 9.5 9.5 161 5 33.401

41161820 18 x 20 9/16 x 5/8 315 21 23 10 11 205 5 38.0041162224 22 x 24 11/16 x 3/4 365 25 27.5 11 12 310 5 43.6041162630 26 x 30 13/16 x 15/16 410 29.5 34 13 14.3 496 5 48.7041162832 28 x 32 7/8 x 1 430 32 36.5 13.5 15 582 5 53.00‘

Double ended ring spanners20TX*for external TORX® screws, offset, Chrome Alloy Steel, chrome plated.

‘

L d1 d2 a1 a2 t RCode size mm mm mm mm mm mm g S €‘

41241112 E11 x E12 196 14.6 15.9 9 9 23 90 1 14.7041241416 E14 x E16 218 17.4 18.8 9 10 25 132 1 19.6041241820 E18 x E20 254 22.6 24.1 11 12 27 183 1 19.6041242224 E22 x E24 298 25.3 29.5 12 13 31 293 1 22.30‘


Double ended ring spanners21TXfor external TORX® screws, straight, Chrome Alloy Steel, chrome plated.

‘

L d1 d2 a1 a2 RCode size mm mm mm mm mm g S €‘

41250608 E6 x E8 115.5 9.6 11.6 4.5 5.5 17 10 10.4041251012 E10 x E12 149.5 13.7 15.7 6.5 7.5 33 10 12.3041251418 E14 x E18 185 17.8 22.5 8 9.5 71 10 15.6041252024 E20 x E24 227 24.7 29.2 10.5 12.5 129 10 20.20‘

78

Spanners

2

H Double ended open ringspanners, angled

24

PDIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a1 a2 m1 m2 RCode mm mm mm mm mm mm mm mm g S €‘

41080810 8 x 10 145 17.5 19.5 7 8.5 6.3 7.1 39 10 14.5041080911 9 x 11 155 18.5 21.5 8.5 9 6.7 8.6 54 10 15.3041081011 10 x 11 155 19.5 21.5 8.5 9 7.1 8.6 55 10 14.2041081012 10 x 12 160 19.5 22.5 8.5 9.5 7.1 9 59 10 14.401

41081113 11 x 13 170 21.5 24 9 10 8.6 10 80 10 14.4041081214 12 x 14 180 24 26 9.5 10.5 9 11 89 10 16.10‘

H Double ended open ringspanners, angled

24a

‘

A L d1 d2 a1 a2 m1 m2 RCode „ mm mm mm mm mm mm mm g S €‘

41481620 1/4 x 5/16 105 16.5 18 5.5 7 3.7 5 32 10 20.0041482024 5/16 x 3/8 145 17.5 19.5 7 8.5 6.3 7.1 39 10 20.0041482428 3/8 x 7/16 155 19.5 21.5 8.5 9 7.1 8.6 57 10 20.3041483234 1/2 x 9/16 180 24 26 9.5 10.5 9.5 11 87 10 22.00‘

I Double ended open ringspanners, angled

24

PDIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a1 a2 m1 m2 RCode mm mm mm mm mm mm mm mm g S €‘

41081417 14 x 17 200 26 30 10.5 12 11 14 115 10 16.1041081619 16 x 19* 220 29 33 12 13 13 15.8 155 5 22.2041081719 17 x 19 220 30 33 12 13 14 15.8 151 10 18.1041081821 18 x 21* 230 31.5 35.5 13 13.5 14.8 16.2 182 5 25.001

41081922 19 x 22 230 33 37 13 15 15.8 17 192 5 21.8041082224 22 x 24 245 37 40.5 15 16 17 18 251 5 24.4041082427 24 x 27 270 40.5 44.5 16 17.5 18 20 310 5 30.5041082736 27 x 36 300 42 54 16 19 20 27 414 5 37.701

41083032 30 x 32 300 48.5 50.5 20 22 22 24 455 5 39.10‘


I Double ended open ringspanners, angled

24a

‘

A L d1 d2 a1 a2 m1 m2 RCode „ mm mm mm mm mm mm mm g S €‘

41483640 5/8 x 3/4 218 29 33 12 13 12.7 15.8 148 5 25.1041484048 3/4 x 1 232 33 40.2 13 16 15.8 19 199 5 30.60‘

ES 24/7, 8x10–19x22 mm

175 x 350 x 30 mm, 7 pieces‘

RCode g €‘

96838171 835 123.55‘

No 24 sizes 8 x 10; 10 x 11; 11 x 13;12 x 14; 14 x 17; 17 x 19; 19 x 22 mm

‘

83812086 Empty tray 103 8.35‘

Ratchet wrenches FastRatch240registered design, specially suitable for union nuts. Using a single wrench,it is possible to tighten/loosen both metric and imperial nuts and bolts.Made of hardened and tempered stainless steel.

‘

A L b a RCode mm/“ mm mm mm g S €‘

41100808 18 5/16 121.4 16 4 60 1 29.8041101010 10 3/8 133.3 20 4 70 1 30.0041101111 11 7/16 140.4 23 5 103 1 31.2041101212 12 15/32 146.3 25 5 100 1 32.901

41101313 13 1/2 168.4 26.8 6 154 1 33.4041101414 14 9/16 174.6 29.6 6 180 1 34.1041101616 16 5/8 191.3 32.8 7 270 1 37.2041101717 17 21/32 201.7 34.3 7 310 1 38.901

41101818 18 11/16 212.8 36.2 7 310 1 41.4041101919 19 3/4 238.5 38.5 7 380 1 41.60‘

Sets: Ratchet wrenches FastRatch‘


96411001 240/5 10 mm - 3/8“; 11 mm - 7/16“; 14 mm - 9/16“;17 mm - 21/32“; 19 mm - 3/4“ 1022 175.80

96411002 240/6 8 mm - 5/16“; 10 mm - 3/8“; 13 mm - 1/2“; 14 mm - 9/16“; 17 mm - 21/32“; 19 mm - 3/4“ 1094 207.80

‘

79

2

Ratchet ring spanners25

Pwith bi-hexagon, straight, 22 teeth, chrome plated.

‘

A L d1 d2 a RCode mm mm mm mm mm g S €‘

41130708 7 x 8 109 15 17 9 55 1 14.4041130910 9 x 10 139 20 23 9 80 1 17.6041131011 10 x 11 170 26 30 12 144 1 21.5041131213 12 x 13 170 26 30 12 135 1 21.501

41131415 14 x 15 170 26 30 12 126 1 21.5041131618 16 x 18 205 33 36 12 196 1 23.6041131719 17 x 19 205 33 36 12 188 1 26.30‘

Ratchet ring spanners25aNas No 25, but made of solid steel, Fed. Spec. GGG-W-001405.

‘

A L d1 d2 a RCode „ mm mm mm mm g S €‘

41561620 1/4 x 5/16 109 15 17 9 65 1 14.0041562022 5/16 x 11/32 109 15 17 9 60 1 25.8041562428 3/8 x 7/16 139 20 23 9 90 1 16.1041563234 1/2 x 9/16 174 26 30 12 164 1 19.601

41563638 5/8 x 11/16 205 33 36 12 257 1 23.6041564044 3/4 x 7/8 235 36 40 13 296 1 25.1041564246 13/16 x 15/16 235 36 40 12 281 1 25.90‘

Sets: Ratchet ring spanners‘


96411302 25/4 9 x 10; 12 x 13; 14 x 15; 17 x 19 556 86.9096411301 25/7Pc 7 x 8; 9 x 10; 10 x 11; 12 x 13;

14 x 15; 16 x 18; 17 x 19 1049 160.8096415602 25a/4N 3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8 1000 84.4096415601 25a/7PcN 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16;

5/8 x 11/16; 3/4 x 7/8; 13/16 x 15/16 1271 164.50‘

Standard packing: clear view wallet.Pc: in green plastic-wallet.‘

ES 25/7, 7x8–17x19 mm

175 x 350 x 30 mm, 7 pieces‘

RCode g €‘

96838108 1040 154.55‘


‘

83812038 Empty tray 111 8.15‘

TCS 25/7


RCode g €‘

96838751 984 165.50‘


‘

Spline drive ratchet ring spanners25aSP

Ustraight, 22 teeth, chrome plated.

‘

Spline A L d1 d2 a RCode size „ mm mm mm mm g S €‘

41570810 8 x 10 1/4 x 5/16 109 15 17 9 59 1 15.5041571214 12 x 14 3/8 x 7/16 139 20 23 9 84 1 19.6041571618 16 x 18 1/2 x 9/16 174 26 30 12 153 1 24.9041572022 20 x 22 5/8 x 11/16 205 33 36 12 245 1 29.201

41572428 24 x 28 3/4 x 7/8 235 36 40 13 279 1 30.50‘

Ratcheting bit holder25Bfor hexagon bits, magnetic location, reversible heads angled,chrome plated.

‘

inside L d1 d2 a1 a2 RCode b „ mm mm mm mm mm g S €‘

41541620 1/4 x 5/16 138 20 23 15 17 105 1 24.40‘

80

Spanners

2

Ratchet ring spanners26a

Preversible, with bi-hexagon, angled, 22 teeth, chrome plated.

‘

A L d1 d2 a RCode „ mm mm mm mm g S €‘

41551620 1/4 x 5/16 109 15 17 9 55 1 16.5041552428 3/8 x 7/16 139 20 23 9 80 1 19.0041553234 1/2 x 9/16 170 26 30 12 126 1 22.00‘

Double ended ring spannersSTARTER

27

PISO 3318, Chrome Alloy Steel, chrome plated.

‘

A L d1 d2 a r1 r2 RCode mm mm mm mm mm mm mm g S €‘

41091012 10 x 12 150 16.5 19.5 6.5 35 60 53 10 19.0041091113 11 x 13 150 16.5 19.5 6.5 35 60 50 10 18.0041091416 14 x 16 179 21 24.5 7.5 36 64 91 10 23.2041091417 14 x 17 179 21 24.5 7.5 36 64 89 10 21.101

41091517 15 x 17 184 22.5 25 7.5 38 66 96 10 22.6041091618 16 x 18 200 25.3 27.5 8.5 47 68 130 5 28.2041091922 19 x 22 225 28 32 9 48 67 164 5 30.30‘

c Double ended flexi-joint spannerFLEXI

29

PChrome Alloy Steel, chrome plated.

‘


43010607 6 x 7 180 9.5 11 23 23 51 10 25.70‘

f Double ended flexi-jointspanners FLEXI

29


‘


43010809 8 x 9 201 11.9 13.4 26 27.5 81 10 27.2043011011 10 x 11 202 14.7 15.9 30.5 32 102 10 27.2043011013 10 x 13 230.5 14.7 18.4 30 33.5 137 10 33.8043011213 12 x 13 228 17.2 18.4 33 33.5 153 10 29.701

43011415 14 x 15 227 19.7 20.9 35 37 197 10 31.4043011617 16 x 17 247 22.2 23.7 38.5 39 234 10 35.2043011618 16 x 18 249 22.2 24.7 38.5 40 267 10 41.0043011719 17 x 19 250 23.7 26.3 39 41 277 5 36.801

43011819 18 x 19 246.5 24.7 26.3 40 41 294 5 39.5043012022 20 x 22 287.5 27.3 29.8 45.5 48 430 5 45.4043012123 21 x 23 286.5 28.6 31.1 46.5 50 447 5 49.2043012427 24 x 27 349.5 32.4 36.1 50.5 60.5 716 5 70.50‘

f Double ended flexi-jointspanners FLEXI

29a

‘

A L d1 d2 a1 a2 RCode „ mm mm mm mm mm g S €‘

43412428 3/8 x 7/16 202 14 16 30.5 32 98 5 29.9043413234 1/2 x 9/16 227 18.1 20 35 37 195 5 34.6043413638 5/8 x 11/16 249.5 22.1 24 39 40 269 5 40.20‘

29/7 Set: Double ended flexi-jointspanners FLEXI; 8x9–20x22 mm

‘


96430101 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm 1503 235.60

‘

Standard packing: carton.‘

ES 29/6, 8x9–18x19 mm

175 x 350 x 30 mm, 6 pieces‘

RCode g €‘

96838109 1185 198.35‘


‘

83812041 Empty tray 105 8.15‘

81

2

TCS 29/7, 8x9–20x22 mm


RCode g €‘

96830195 1520 258.10‘


‘

Heavy duty ring spanners5without tubular handle, Chrome Alloy Steel, chrome plated.

‘

A L1 L2 b a h RCode mm mm mm mm mm mm g handle S €‘

42020024 24 180 555 38 17 29.5 381 5 1/2 -1 1 29.9042020027 27 190 560 41 17 31.5 421 1 1 31.2042020030 30 200 565 47 18 33.5 503 1 1 33.7042020032 32 235 730 49 18 34 712 2 1 39.701

42020036 36 245 735 54 20 35.5 816 2 1 41.4042020038 38 250 740 56 21 37.5 810 2 1 58.5042020041 41 265 750 62 22 39.5 910 2 1 49.4042020042 42 265 750 62 22 39.5 919 2 1 57.001

42020046 46 280 910 69 23 40 1192 3 1 56.0042020050 50 290 920 76 25.5 42.5 1426 3 1 66.5042020055 55 300 925 81 28 45.5 1541 3 1 72.5042020060 60 345 1050 90 30.5 49 2260 4 1 93.501

42020065 65 355 1060 98 33 53 2603 4 1 101.0042020070 70 365 1065 105 35.5 55 2882 4 1 114.0042020075 75 375 1070 110 38 57.6 3058 4 1 132.0042020080 80 385 1075 125 40.5 59 3889 4 1 152.001

42020085 85 385 1075 125 40.5 59 3648 4 1 156.0042020090 90 410 1100 140 45 63 5238 4 1 290.0042020095 95 410 1100 140 45 63 4630 4 1 311.0042020100 100 412 1100 143 45 63 4895 4 1 343.00‘

No 5a available on requestL2 = length with handle No 5 1/2‘

Tubular handles5 1/2for heavy duty ring spanners No 5.

‘

L d A A RCode size mm mm mm „ g S €‘

48030001 1 460 19 24–30 1–1 3/16 605 1 27.1048030002 2 610 22 32–42 1 1/4–1 11/16 1562 1 31.6048030003 3 760 25 46–56 1 3/4–2 1/4 2820 1 54.0048030004 4 860 30 60–100 2 3/8–3 7/8 3705 1 71.00‘

Striking face ring spanners8

StahlwilleSTABIL®

Chrome Alloy Steel, green painted.

‘


42010032 32 195 47 24 661 1 83.5042010036 36 195 52.4 26 684 1 88.0042010041 41 200 59 29 896 1 105.0042010046 46 250 65 32 1218 1 109.001

42010050 50 280 70 35 1555 1 125.0042010055 55 300 76 38 2087 1 140.0042010060 60 300 82.5 42 2394 1 157.0042010065 65 325 90.5 45 3209 1 186.001

42010070 70 355 97 48 3649 1 207.0042010075 75 360 103.5 51 4428 1 230.0042010080 80 440 110 57 5895 1 271.0042010085 85 440 117 57 6033 1 300.001

42010090 90 445 124 60 6885 1 365.0042010095 95 450 131 67 7875 1 409.0042010100 100 455 137 72 10224 1 489.0042010105 105 460 146 73 10202 1 513.001

42010110 110 500 156 82 14492 1 688.0042010115 115 505 162 82 14376 1 720.0042010120 120 510 174 82 15308 1 829.00‘

Additional spanner opening to DIN 7444 on request.‘

Striking face ring spanners4205aDIN 7444, special steel, grey.

‘

A L b a RCode „ mm mm mm g S €‘

42450056 1 1/4 190 52 17 350 1 32.8042450058 1 5/16 190 52 17 350 1 32.8042450064 1 1/2 205 58 18 500 1 41.4042450066 1 5/8 230 66 20 700 1 54.501

42450067 1 11/16 230 66 20 700 1 54.5042450069 1 13/16 240 74 22 975 1 59.0042450070 1 7/8 240 74 22 975 1 59.0042450072 2 255 80 24 1075 1 68.001

42450073 2 1/16 255 80 24 1075 1 68.0042450075 2 3/16 270 86 25 1320 1 77.5042450076 2 1/4 270 86 25 1340 1 77.5042450078 2 3/8 280 93 26 1600 1 81.001

42450079 2 7/16 280 93 26 1600 1 81.0042450081 2 9/16 300 102 30 2300 1 105.0042450082 2 5/8 300 102 30 2300 1 105.0042450084 2 3/4 330 110 33 2900 1 118.001

42450085 2 13/16 330 110 33 2900 1 118.0042450087 2 15/16 330 110 33 2900 1 127.00‘

Additional spanner opening on request.‘

82

Spanners

2

Striking sockets61*They may be extended by adding any number of similar sockets, to reach deep seated bolts. Equal inside and outside hexagons, Chrome Alloy Steel, chrome plated.

‘

A L d a RCode mm mm mm „ g S €‘

06030046 46 82 65 1 873 1 147.0006030060 60 95 82.5 1 1673 1 187.0007030105 105 155 146 1 1/2 9189 1 1149.00‘


Single-end spanners4004DIN 894, Special Tool Steel, grey finish.

‘


40040240 24 215 50 8.9 147 1 6.5040040270 27 238 56 9.8 193 1 7.4040040300 30 261 62 10.8 268 1 8.5540040320 32 273 66 11.8 315 1 9.751

40040360 36 300 74 12.8 421 1 13.5040040410 41 335 83.5 12.8 555 1 17.4040040460 46 369 93 14.8 770 1 21.9040040500 50 412 102 17 1003 1 28.101

40040550 55 457 112 18 1267 1 30.3040040600 60 492 122 18 1650 1 38.8040040650 65 528 132 19 2012 1 48.6040040700 70 572 142 20 2425 1 57.001

40040750 75 608 152 21 2758 1 72.5040040800 80 645 162 22 2963 1 88.0040040850 85 690 173 23 3717 1 111.0040040900 90 690 173 23 3570 1 129.001

40040950 95 847 195 25 5943 1 184.00‘

4025 Single-end spanners, adjustableright-handed, DIN 3117/ISO 6787, B shape, jaw offset 22°,Chrome Vanadium, chrome plated.

‘

A L b a RCode size max. mm mm mm mm g S €‘

40250004 4 13 114 33 9.5 53 5 19.7040250006 6 20 159 48 12 123 5 21.1040250008 8 24 206 60 13.5 241 5 25.1040250010 10 29 257 71 16 399 5 31.201

40250012 12 34 309 83 19 708 5 41.5040250015 15 43 384 103 25 1287 1 67.5040250018 18 53 460 120 30 2105 1 106.00‘

4026 Single-end spanners, adjustableleft-handed, DIN 3117/ISO 6787, A shape, jaw offset 15°,Chrome-Vanadium, gunmetal finish.

‘

A L b a RCode size max. mm mm mm mm g S €‘

40260004 4 13 114 33 9.5 50 5 18.2040260006 6 20 159 48 12 138 5 19.6040260008 8 24 206 60 13.5 247 5 23.2040260010 10 29 257 71 16 397 5 28.801

40260012 12 34 309 83 19 699 5 39.1040260015 15 43 384 103 25 1324 1 62.5040260018 18 53 460 120 30 2076 1 99.00‘

4204 Striking face open ended spannersDIN 133, Special Tool Steel, grey finish.

‘


42040027 27 180 56 16 321 1 18.5042040030 30 190 62 17 451 1 19.7042040032 32 190 62 17 424 1 21.2042040036 36 215 76 17.5 698 1 28.501

42040041 41 235 86 18.5 923 1 35.0042040046 46 255 98 20 1245 1 47.5042040050 50 275 105 21 1445 1 53.5042040055 55 300 116 23 2057 1 63.501

42040060 60 320 128 24.5 2559 1 68.5042040065 65 342 138 27 3285 1 91.5042040070 70 375 154 30 4573 1 113.0042040075 75 375 154 30 4163 1 123.001

42040080 80 408 174 34 6059 1 157.0042040085 85 408 174 34 5871 1 168.0042040090 90 445 194 38 7600 1 204.0042040095 95 445 194 38 7600 1 221.001

42040100 100 485 215 44 11500 1 355.0042040105 105 485 215 44 11200 1 409.00‘

83

2

Box spanners10750DIN 896 Type B, made of seamlessly drawn precision steel tubing,recessed at both ends, Chrome Alloy Steel, surface polished and chromeplated.

‘

A L d1 d2 RCode mm mm mm mm g S €‘

43320607 6 x 7 110 7.52 10.5 26 10 4.5043320809 8 x 9 110 12.2 13.2 30 10 5.2043321011 10 x 11 120 14.2 15.2 48 10 5.8043321213 12 x 13 140 17.2 18.2 68 10 6.201

43321415 14 x 15 140 19.2 20.2 78 10 6.6543321617 16 x 17 150 22.2 23.2 123 10 8.2543321719 17 x 19 160 24.2 26.2 147 10 9.5543321819 18 x 19 160 25.2 26.2 148 10 9.551

43322022 20 x 22 170 27.2 29.3 200 5 9.9043322123 21 x 23 170 28.2 30.2 191 5 9.9543322426 24 x 26 190 32.2 34.2 293 5 13.2043322427 24 x 27 190 32.2 35.2 289 5 13.201

43323032 30 x 32 200 39.2 42.3 382 5 18.0043323236 32 x 36 220 42.2 46.2 535 2 25.1043323641 36 x 41 220 47.2 52.5 662 2 30.8043324146 41 x 46 240 53.2 59.2 750 2 37.101

43324650 46 x 50 240 58.5 63.5 959 2 67.0043325560 55 x 60 240 70.2 76.2 1125 2 103.00‘

Sets: Box spanners‘


96431201 10750/7 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 725 51.55

96431204 10750/11 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 30 x 32 1862 97.20

‘

ES 10750/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838168 1132 90.80‘


‘

No 10750 1/2 sizes 6; 7‘

83812084 Empty tray 103 8.35‘

Box spanners10751double ended, forged Chrome Vanadium Steel, bored out, polished heads,chrome plated.

‘

A L d1 d2 E RCode mm mm mm mm mm g S €‘

43200607 6 x 7 110 9.5 10.5 8 39 10 16.1043200809 8 x 9 120 11.8 13 9 55 10 16.1043201011 10 x 11 130 14.4 16 11 72 10 16.6043201213 12 x 13 140 17 18.4 13 116 10 18.201

43201415 14 x 15 150 19.5 20.8 14 147 10 22.8043201617 16 x 17 160 21.8 23 16 193 10 25.4043201819 18 x 19 170 24.4 26 18 225 10 29.0043202022 20 x 22 180 27.3 30 20 328 5 31.301

43202123 21 x 23 185 28.5 31 21 340 5 34.5043202427 24 x 27 190 32.2 36 24 436 5 43.0043203032 30 x 32 200 39 41.5 30 619 5 81.50‘

ES 10751/10, 6x7–20x22 mm

175 x 350 x 30 mm, 10 pieces‘

RCode g €‘

96838169 1586 210.25‘


‘

No 10750 1/2 sizes 6; 7‘

83812084 Empty tray 103 8.35‘

Tommy bars10750 1/2for No 10750 and No 10751, stepped.

‘

for No 10750 for No 10751 L RCode size A mm A mm mm g S €‘

48010006 6 6 x 7–14 x 15 6 x 7–16 x 17 180 57 1 10.9048010007 7 16 x 17–24 x 27 18 x 19–30 x 32 320 338 1 15.5048010008 8 30 x 32–55 x 60 – 630 1480 1 39.80‘

L = Length‘

2

After STAHLWILLE was certified,as one of the very first companies back in 1990,

to DIN EN ISO 9002, our Quality Assurance Systemwas also certified to DIN EN ISO 9001 in 1992.

Certified to DIN EN ISO 9001

3

1

3

Sockets, Socket sets,Accessories for manual drives

86

The professionals in industry and the trades areunder pressure to work quickly, accurately andeconomically. Which is why they make heavy demands on their tools. Due to the numerous technical innovations incorporated in them,STAHLWILLE ratchets and sockets make a valuable contribution to the prevention of both mistakes and injuries.By using ratchets, adaptors and inserts made bySTAHLWILLE, professional tradesmen are quite simply“making sure”. It does not matter whether it is a fullset of tools or individual components – users canbe sure they will get top-of-the-range quality everytime. This is guaranteed by adherence to the closest tolerances during production and stringently applied quality assurance measures inaccordance with DIN EN ISO 9001.

STAHLWILLE sets of socket spanners

and inserts. . .

The legendary reliability and precision of these tools is enhanced by a large number ofuser-friendly features.

Non-slip, ergonomically manufactured 2-component handles facilitate strain-free working.Slim-design sockets enable access to awkwardplaces.The QuickRelease system ensures full controlover the joint between the ratchet, the adaptorsand the sockets.Sculpted chemical-resistant cut-outs in specialPE foam inlays prevent tools rattling and slidingaround.

Safety advantage 1

STAHLWILLE AS-Drive

Safety advantage 2

The problem:removing heavily corroded screws requires the application of considerable force. The socket slips off the head of the screw.The consequences: uncontrolled movements cause injuries and damage to both the workpiece and the tools.The solution:STAHLWILLE sockets are equipped with the AS Drive* profile. This permits high transmission of forces to the lands of nuts and bolts without damaging them. The risk of injury is minimised and the corners of the screw heads and nuts are no longer damaged.

*AS-Drive = Anti-Slip-Drive

AS - drive

The tolerances on the jaw sizesand square drives of these

cold-extruded sockets are asclose as if they had been

broached. This prevents themslipping off the heads.

The consequences:minimum wear on both

screws and tools.

STAHLWILLE QuickRelease system

The problem:imagine what happens if a tool falls into an inaccessible place during repairor overhaul work.The consequences: arduous, costly search and recovery, possibly involving disassembly of anaeroengine or machine.The solution: the safety lock built into the QuickRelease system prevents damage to workpieces and guarantees secure, rapid connection of all individual components to form a single combined unit. Nothing can get lost because it is not possible to inadvertently release a tool. To release a tool, it is first necessary to press the release button deliberately.Even if you have oily or greasy hands, attaching and separating the individual components is so simple it noticeably smoothes your workflows.

87

provide guaranteed safety and efficiency.

Ergonomically designed 2-component handle madeof impact-resistant, skydrolresistant plastic.All metal parts are made ofhigh-grade steel (ChromeAlloy Steel, chrome plated).Firm seating and yet easyrelease of sockets andadaptors. Wear parts can be easily replaced using sets of spares for sockets.Separate pawl to switchfrom clockwise to anti-clockwise.

�

�

�

�

�

Set No 45/14/5iQRin sturdy plastic case

�

�

� �

�

STAHLWILLE HPQ inserts

Safety advantage 3

The problem: although there is hardly enough room to move, you still have to apply considerable torque to loosen a stubborn screw.The consequences: many of the sockets available are useless simply because their wall thickness makes them impracticable in awkward places.The solution:STAHLWILLE HPQ* sockets are manufactured from selected tough steel alloys. These sockets will not slip off the head of the screw, nor will they stretch when subjected to heavy loads. Their extremely thin walls and unbelievably high load capacity are simply exemplary. HPQ sockets are free of cadmium and are therefore suitable for use on titanium alloy parts and titanium fasteners as used e.g. in the aerospace industry, where safety is a crucial factor. They meet these aerospace standards: E DIN EN 3709, E DIN EN 3710, SAE AS 954-E, S.B.A.C. AS 40605/40606, MS-33787, MIL-W-8982.

*HPQ = High Performance Quality

Some sets of STAHLWILLEsocket spanners are supplied

in sturdy plastic cases.

Sockets, Socket sets

3

88

1/4''6.3

DIN3120

ISO1174-1

f Sockets40D

P Qmetric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5M,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641,SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

‘

A d1 d2 d3 L t1 t2 RCode mm mm mm mm mm mm mm g S €‘

01030005 5 7.9 10.7 4 23 4.5 15 9 10 4.0001030055 5.5 8.5 10.7 4.5 23 6 15 9 10 3.9501030006 6 9.2 10.7 5 23 6 15 9 10 3.9501030007 7 10.7 10.7 6 23 6.5 13.4 10 10 3.951

01030008 8 11.6 11.6 7 23 8 13.1 11 10 3.9501030009 9 12.8 12.8 8 23 8 12.8 13 10 4.1501030010 10 14.3 14.3 9 23 8 14.9 17 10 4.1501030011 11 15.5 15.5 10 23 9 14.6 19 10 4.301

01030012 12 16.5 16.5 11 23 9.5 14.3 23 10 5.0501030013 13 17.8 17.8 12 23 9.5 14 25 10 5.0501030014 14 18.8 18.8 13 24 10 14.7 32 10 5.20‘

f Sockets40aD‘

A d1 d2 d3 L t1 t2 RCode '' mm mm mm mm mm mm g S €‘

01530010 5/32 6.7 10.7 3.2 23 3.5 15 7 10 4.2501530012 3/16 7.6 10.7 4 23 4.5 15 9 10 4.1001530014 7/32 8.6 10.7 5 23 6 15 9 10 4.1501530016 1/4 9.4 10.7 5.5 23 6 15 9 10 4.151

01530018 9/32 10.7 10.7 6.6 23 6.5 13.2 10 10 4.1501530020 5/16 11.6 11.6 7 23 8 13.1 11 10 4.2501530022 11/32 12.7 12.7 8.1 23 8 13.3 13 10 4.4001530024 3/8 13.7 13.7 8.3 23 8 13.3 16 10 4.401

01530028 7/16 15.8 15.8 10 23 9 14.6 21 10 4.7501530032 1/2 17.3 17.3 11.5 23 9.5 14.1 27 10 5.2501530034 9/16 18.8 18.8 13.1 24 10 14.7 31 10 5.40‘

Set: Sockets with clip strip40aD/10CL

P QContent:3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''1 clip strip No 40CL-2

‘

RCode g €‘

96015310 206 50.60‘

e Sockets40

P Qmetric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M,E DIN EN 3709 (test loads), American sizes: ASME B 107.1,Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),HPQ high performance steel, chrome plated.

d 3

t2

t1

‘


01010003 3 5.6 10.7 2.5 23 2 15 7 10 4.7001010032 3.2 5.6 10.7 2.5 23 2 15 8 10 4.4501010035 3.5 6 10.7 2.5 23 2.5 15 8 10 4.2501010004 4 6.7 10.7 3.2 23 3.5 15 9 10 3.951

01010045 4.5 7.3 10.7 3.7 23 4 15 9 10 3.8501010005 5 7.9 10.7 4 23 4.5 15 9 10 4.0001010055 5.5 8.5 10.7 4.5 23 6 15 9 10 3.9501010006 6 9.2 10.7 5 23 6 15 9 10 3.951

01010007 7 10.7 10.7 6 23 6.5 13.4 10 10 3.9501010008 8 11.6 11.6 7 23 8 13.1 11 10 3.9501010009 9 12.8 12.8 8 23 8 12.8 14 10 4.1001010010 10 14.3 14.3 9 23 8 14.9 17 10 4.201

01010011 11 15.5 15.5 10 23 9 14.6 19 10 4.3001010012 12 16.5 16.5 11 23 9.5 14.3 24 10 4.8001010013 13 17.8 17.8 12 23 9.5 14 26 10 4.5001010014 14 18.8 18.8 13 24 10 14.7 32 10 5.25‘

e Sockets40a‘


01410008 1/8 5.6 10.7 2.5 23 2 15 7 10 3.9501410010 5/32 6.7 10.7 3.2 23 3.5 15 9 10 4.2501410012 3/16 7.6 10.7 4 23 4.5 15 9 10 4.1001410014 7/32 8.6 10.7 5 23 6 15 9 10 4.151

01410016 1/4 9.4 10.7 5.5 23 6 15 9 10 4.1501410018 9/32 10.7 10.7 6.6 23 6.5 13.2 10 10 4.1501410020 5/16 11.6 11.6 7 23 8 13.1 12 10 4.2501410022 11/32 12.7 12.7 8.1 23 8 13.3 14 10 4.601

01410024 3/8 13.7 13.7 8.3 23 8 13.3 16 10 4.6001410028 7/16 15.8 15.8 10 23 9 14.6 21 10 4.6501410032 1/2 17.3 17.3 11.5 23 9.5 14.1 27 10 5.2501410034 9/16 18.8 18.8 13.1 24 10 14.7 31 10 5.30‘

STAHLWILLE AS-DriveSTAHLWILLE sockets are equippedwith the AS-Drive* profile: thispermits high transmission offorces to the lands of nuts andbolts without damaging them.No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive

3

89

1/4''6.3

DIN3120

ISO1174-1

f Sockets40DL

P Qextra deep, metric sizes: E DIN EN 3710, E DIN EN 3709,DIN 3124/ISO 2725-1, ASME B 107.5M,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,HPQ high performance steel, chrome plated.

‘


01240005 5 7.9 10.7 4 50 4.5 42 18 5 12.6001240055 5.5 8.5 10.7 4.5 50 6 42 16 5 12.7001240006 6 9.2 10.7 5 50 6 42 18 5 12.6001240007 7 10.7 10.7 6 50 6.5 40.9 21 5 12.601

01240008 8 11.6 11.6 7 50 8 40.1 23 5 12.6001240009 9 12.8 12.8 8 50 8 39.8 30 5 12.6001240010 10 14.3 14.3 9 50 9 41.9 35 5 12.6001240011 11 15.5 15.5 10 50 10.5 41.6 40 5 13.201

01240012 12 16.5 16.5 11 50 12 41.3 47 5 13.2001240013 13 17.8 17.8 12 50 12 41 50 5 13.2001240014 14 18.8 18.8 13 50 15 40.7 57 5 13.20‘

f Sockets40aDL‘


01640010 5/32 6.7 10.7 3.2 50 4.5 42 13 5 12.2001640012 3/16 7.6 10.7 4 50 4.5 42 15 5 12.2001640014 7/32 8.6 10.7 5 50 6 42 16 5 12.2001640016 1/4 9.4 10.7 5.2 50 6 42 19 5 12.201

01640018 9/32 10.7 10.7 6.5 50 8 40.2 20 5 12.2001640020 5/16 11.6 11.6 7 50 8 40.1 24 5 12.2001640022 11/32 12.7 12.7 8.1 50 9 39.7 26 5 12.2001640024 3/8 13.7 13.7 8.3 50 9 39.7 33 5 12.601

01640028 7/16 15.8 15.8 10 50 10.5 41.6 42 5 12.6001640032 1/2 17.3 17.3 11.5 50 12 41.1 44 5 12.6001640034 9/16 18.8 18.8 13.1 50 15 40.7 55 5 12.60‘

Set: Sockets40aDL/7

P Qextra deepContent:3/16; 1/4; 5/16; 3/8; 7/16; 1/2; 9/16''

‘

RCode g €‘

96016401 241 87.00‘

packed in carton‘

Set: Sockets with clip strip40aDL/10CL

P QContent:3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''1 clip strip No 40CL-2

‘

RCode g €‘

96016410 350 129.20‘

f Sockets40aDV

P QSAE AS 954, S.B.A.C. AS 40605/40606, HPQ high performance steel, chrome plated.

‘


01650014 7/32 8.6 10.7 5 31.8 6 23.8 12 10 11.6001650016 1/4 9.4 10.7 5.2 31.8 6 23.8 13 10 11.6001650018 9/32 10.7 10.7 6.6 31.8 6.5 22 13 10 11.6001650020 5/16 11.6 11.6 7 31.8 8 21.9 15 10 11.60‘

STAHLWILLE HPQ insertsSTAHLWILLE HPQ* sockets aremanufactured from selected toughsteel alloys. The result: they areextremely durable. HPQ socketsare free of cadmium and are there-fore suitable for use on titaniumalloy parts and titanium fastenersas used e.g. in the aerospace industry,where safety is a crucial factor.

*High Performance Quality


3

90

1/4''6.3

DIN3120

ISO1174-1

e Sockets40L

P Qextra deep, DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3710,E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

d 3

t2

t1

‘


01020004 4 6.7 10.7 3.2 50 3.5 42 14 10 13.7001020045 4.5 7.3 10.7 3.7 50 4 42 15 10 13.7001020005 5 7.9 10.7 4 50 4.5 42 16 10 12.7001020055 5.5 8.5 10.7 4.5 50 6 42 17 10 12.701

01020006 6 9.2 10.7 5 50 6 42 18 10 12.7001020007 7 10.7 10.7 6 50 6.5 40.9 24 10 12.7001020008 8 11.6 11.6 7 50 8 40.1 27 10 12.6001020009 9 12.8 12.8 8 50 8 39.8 31 10 13.601

01020010 10 14.3 14.3 9 50 9 41.9 38 10 13.0001020011 11 15.5 15.5 10 50 10.5 41.6 43 10 13.6001020012 12 16.5 16.5 11 50 12 41.3 49 10 13.7001020013 13 17.8 17.8 12 50 12 41 56 10 13.40‘

f UNIFLEX sockets402

P QAmerican sizes: SAE AS 954, ASME B 107.1,HPQ high performance steel, chrome plated.

‘


01140006 6 9.2 12.7 5 32 5.5 10 16 5 31.7001140007 7 10.4 12.7 6 33.5 6 11.5 16 5 31.7001140008 8 11.6 12.7 6.7 35 8 13 17 5 31.7001140009 9 13 12.7 8 36 8 12 20 5 31.701

01140010 10 14.2 12.7 9 38 12 14 38 5 31.70‘

f UNIFLEX sockets402a‘


01540014 7/32 8.6 12.7 4.8 32 5.5 10 17 5 32.5001540016 1/4 9.6 12.7 5.2 32 5.5 10 16 5 31.7001540018 9/32 11 12.7 6.4 32 6.5 10 19 5 32.5001540020 5/16 11.6 12.7 6.7 35 8 13 17 5 31.701

01540022 11/32 12.7 12.7 8 35 7.5 11.5 19 5 32.5001540024 3/8 13.6 12.7 9 38 8.6 13.1 20 5 31.7001540028 7/16 15.7 12.7 10.5 39.5 10.7 15 23 5 31.7001540032 1/2 17.3 12.7 12 41.5 11.1 16.5 27 5 31.70‘

Set: UNIFLEX sockets402a/5

P QContent:1/4; 5/16; 3/8; 7/16; 1/2''

‘

RCode g €‘

96015401 101 158.50‘

f UNIFLEX sockets402aK

P Qshort version, HPQ high performance steel, chrome plated.

‘


01541024 3/8 13.6 12.7 6.7 34 9.1 12.0 18 5 32.5001541034 9/16 19 12.7 13.1 37.5 10.3 11.8 25 5 32.50‘

p Sockets40TX

Qfor external TORX® screws, HPQ high performance steel, chrome plated.

t2

t1

d 3

‘

C d1 d2 d3 L t1 t2 RCode size mm mm mm mm mm mm mm g S €‘

01270004 E4 3.8 5.6 10.7 2 23 4.5 15 8 10 5.7001270005 E5 4.7 6.7 10.7 2.8 23 5 15 7 10 5.7001270006 E6 5.7 8 10.7 3.6 23 5.5 15 10 10 5.7001270007 E7 6.2 9.6 10.7 3.8 23 6.5 15 10 10 5.701

01270008 E8 7.5 10.5 11.6 4.3 23 7 15 10 10 5.7001270010 E10 9.4 12.7 12.7 5.6 23 9 15 17 10 6.05‘

3

91

1/4''6.3

DIN3120

ISO1174-1

h Sockets spline-drive40aSP


‘

Spline A d1 d2 d3 L t1 t2 RCode size '' mm mm mm mm mm mm g S €‘

01011007 7 7/32 8.6 10.7 5 22.2 6 14.2 7 1 23.2001011008 8 1/4 9.5 10.7 5.6 22.2 7 14.2 10 1 31.0001011009 9 9/32 11.2 11.2 6.6 22.2 8 12.4 10 1 31.0001011010 10 5/16 11.6 11.6 7.1 22.2 8 12.2 12 1 31.001

01011012 12 3/8 13.8 13.8 8.6 23 8.7 12.6 18 1 31.6001011014 14 7/16 15.7 15.7 10.4 25 10.7 14.1 24 1 31.60‘

h Sockets spline-drive40aLSP

Qextra deep bolt clearance, MS-33787, MIL-W-8982,HPQ high performance steel, chrome plated.

‘


01021007 7 7/32 8.6 10.7 5 50.8 6 42.8 18 1 31.1001021008 8 1/4 9.5 10.7 5.6 50.8 8 42.8 24 1 32.6001021010 10 5/16 11.6 11.6 7.1 50.8 8 40.8 27 1 33.60‘

h Uniflex sockets spline-drive402aSP


‘


01542016 8 1/4 9.5 12.7 5.6 32 6.4 9.8 16 5 43.8001542020 10 5/16 11.6 12.7 7.1 35 8 13 18 5 45.60‘

r Screwdriver sockets41Kfor slotted screws, blades to DIN 5264, Chrome Alloy Steel, chrome plated.

‘

r L1 L2 d a b RCode mm mm mm mm mm mm g S €‘

01280006 0.6x3.5 28 16 11.6 0.6 3.5 9 5 5.8501280008 0.8x4 28 16 11.6 0.8 4 10 5 5.8501280010 1x5.5 28 16 11.6 1 5.5 11 5 5.8501280012 1.2x8 28 16 11.6 1.2 8 12 5 5.851

01280016 1.6x10* 28 16 11.6 1.6 10 14 5 6.40‘


i INHEX sockets44for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

‘

B L1 L2 d RCode mm mm mm mm g S €‘

01050003 3 55 30 10.7 14 5 9.0001050004 4 55 30 10.7 16 5 9.0001050005 5 55 30 10.7 20 5 9.0001050006 6 55 30 11.6 26 5 9.00‘

i INHEX sockets44a‘

B L1 L2 d RCode '' mm mm mm g S €‘

01450004 1/16 55 30 10.7 11 5 10.7001450005 5/64 55 30 10.7 12 5 10.4001450006 3/32 55 30 10.7 14 5 10.4001450007 7/64 55 30 10.7 17 5 10.401

01450008 1/8 55 30 10.7 12 5 10.4001450009 9/64 55 30 10.7 13 5 10.4001450010 5/32 55 30 10.7 14 5 10.4001450012 3/16 55 30 10.7 17 5 10.401

01450014 7/32 55 30 10.7 19 5 10.4001450016 1/4 55 30 11.6 24 5 10.40‘

i INHEX sockets44Kfor socket head screws, Chrome Alloy Steel, chrome plated.

‘


01120003 3 28 16 11.6 10 5 5.8501120004 4 28 16 11.6 10 5 5.8501120005 5 28 16 11.6 10 5 5.8501120006 6 28 16 11.6 10 5 5.851

01120008 8 28 16 11.6 15 5 5.85‘


3

92

1/4''6.3

DIN3120

ISO1174-1

n Screwdriver sockets44KTXfor inside TORX® screws, Chrome Alloy Steel, chrome plated.

‘

C L1 L2 d RCode size mm mm mm mm g S €‘

01350008 T8 2.3 28 16 11.6 10 5 6.8001350009 T9 2.5 28 16 11.6 10 5 6.8001350010 T10 2.7 28 16 11.6 10 5 6.8001350015 T15 3.3 28 16 11.6 10 5 6.801

01350020 T20 3.8 28 16 11.6 11 5 6.8001350025 T25 4.4 28 16 11.6 11 5 6.8001350027 T27 5.0 28 16 11.6 11 5 6.9001350030 T30 5.5 28 16 11.6 11 5 6.801

01350040 T40 6.6 28 16 11.6 12 5 7.05‘

o Screwdriver sockets44KTXBwith hollow point, for inside TORX® screws(TORX® TAMPER RESISTANT), Chrome Alloy Steel, chrome plated.

‘


01351008 T8 2.3 28 16 11.6 10 5 7.0001351009 T9 2.5 28 16 11.6 10 5 7.0001351010 T10 2.7 28 16 11.6 10 5 7.0001351015 T15 3.3 28 16 11.6 10 5 7.001

01351020 T20 3.8 28 16 11.6 10 5 7.0001351025 T25 4.4 28 16 11.6 11 5 7.0001351027 T27 5.0 28 16 11.6 11 5 7.1501351030 T30 5.5 28 16 11.6 11 5 7.001

01351040 T40 6.6 28 16 11.6 12 5 7.15‘

k Screwdriver sockets44Pfor recessed head screws Phillips-Recess®, tips to DIN 5260,Chrome Alloy Steel, chrome plated.

‘

PH L1 L2 d RCode size mm mm mm g S €‘

01290001 1 28 16 11.6 10 5 5.8501290002 2 28 16 11.6 11 5 5.8501290003 3 28 16 11.6 12 5 5.8501290004 4 28 16 11.6 14 5 5.85‘

l Screwdriver sockets44PZfor POZIDRIV/SUPADRIV® screws, Chrome Alloy Steel, chrome plated.

‘

PZ L1 L2 d RCode size mm mm mm g S €‘

01300001 1 28 16 11.6 10 5 6.3501300002 2 28 16 11.6 11 5 6.35‘

Clip strips40CLfor socket retention, with 9 or 10 retaining clips. Supplied without sockets.

‘

L RCode size mm g S €‘

80400001 1 200 36 5 5.6080400002 2 300 52 5 5.60‘

Drive tools and accessories1/4'' u, finish: Chrome Alloy Steel, chrome plated.

Ratchet, fine tooth411reversible, 60 teeth, with 2-component handle, for use in confined spaces, re-engages after movement of 6°,DIN 3122/ISO 3315.

‘

L b a RCode mm mm mm g S €‘

11231011 118 24 19.5 96 1 33.10‘

Ratchet415reversible, 22 teeth, with 2-component handle, DIN 3122/ISO 3315.

‘


11111010 117 22 12.5 80 5 44.80‘

QuickRelease ratchet415QR

Üüreversible, 22 teeth,with QuickRelease safetylock and 2-componenthandle, DIN 3122/ISO 3315.

‘


11110020 117 22 12.5 79 1 48.00‘

3

93

1/4''6.3

DIN3120

ISO1174-1

Ratchet415SK*reversible, slim handle,22 teeth, DIN 3122/ISO 3315.

‘


11120010 117 22 12.5 75 5 45.00‘


QuickRelease ratchet415SG-QR

Üüreversible, 22 teeth, with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.

‘


11110030 117 22 12.5 90 1 50.00‘

QuickRelease ratchet415QRL

Üülong, reversible, 22 teeth,with QuickRelease safety lock and 2-component handle.

‘


11110153 153 22 12.5 96 1 59.50‘

Bit ratchet415Breversible, 22 teeth, with 2-component handle and inside hexagon, 1/4'', DIN 3126/ISO 1173 D 6.3 for BitsScrewdriver sockets 1/4''. Internal hex drive with a collar-thrust spring(registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘


11131011 117 22 12 76 5 54.50‘

Bit ratchet415SGBreversible, 22 teeth, with steel handle and insidehexagon, 1/4'', DIN 3126/ISO 1173 D 6.3 for Bits Screwdriver sockets 1/4''. Internal hex drive with a collar-thrust spring(registered design). Bits are easy to insert, lock securely in position andcan be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).‘


11130011 117 22 12 85 1 56.00‘

Flexible joint ratchet416reversible, 60 teeth, handle may beraised or lowered by approx. 90°.Lockable in following positions:straight, 30° up, 60° up, 30° down.Unlocked by depressing button inhandle, registered design.

‘


11260001 170 25 19.5 237 1 68.50‘

Spare parts set for ratchets No 411, 416

4110

Content:1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws

‘

RCode g S €‘

19200001 47 1 24.50‘

for ratchets from 4/96‘

Spare parts set for ratchets No 415, 415SK, 415SG

4150

Content:1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs;2 screws M 1.7 x 8; 1 cover plate

‘

RCode g S €‘

19010000 26 1 24.90‘

Spare parts set for ratchetsNo 415QR, 415SG-QR

4150QR

ÜüContent:1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs;2 screws M 1.7 x 8; 1 cover plate

‘

RCode g S €‘

19011020 24 1 27.70‘

Drive handle400DIN 3122/ISO 3315.

‘

L RCode mm g S €‘

11050010 150 70 5 8.85‘

QuickRelease drive handle400QR

ÜüDIN 3122/ISO 3315, with QuickRelease safety lock.

‘


11051010 150 80 1 10.30‘


3

94

1/4''6.3

DIN3120

ISO1174-1

Drive handle400 Drallwith 1/4'' square drive in end ofhandle, DIN 3122/ISO 3315.

‘


11050011 150 110 5 9.80‘

Drive handle401flexible shaft (right hand rotationonly), maximum torque 5 N m.

‘


11051002 240 130 5 17.90‘

Flexible handle403DIN 3122/ISO 3315, with 2-component handle.

‘


11061010 154.5 70 1 25.90‘

Sliding T-handle404DIN 3122/ISO 3315.

‘


11070000 116 38 5 8.45‘

QuickRelease sliding T-handle404QR

Üüwith QuickRelease safety locks.

‘


11071000 116 52 1 9.70‘

Speeder brace413with steel handle, for greater axial power transmission,detachable palm head, working radius 70 mm.

‘


11100001 440 352 1 52.50‘

Extensions405DIN 3123/ISO 3316.

‘

L d RCode size mm mm g S €‘

11010001 2 54 11.6 29 5 6.1511010006 4 100 11.6 46 5 6.3511010002 6 150 11.6 65 5 6.8011010010 10 254 11.6 115 1 9.351

11010014 14 356 11.6 155 1 11.10‘

Extensions with wobble-drive405Wswivel angle 8° each side, max. torque 40 N m.

‘


11010011 2 54 11.6 28 1 7.1511010016 4 100 11.6 45 1 8.2011010012 6 150 11.6 55 1 8.5011010020 10 254 11.6 110 1 11.101

11010024 14 356 11.6 155 1 12.70‘

QuickRelease extensions405QR

ÜüDIN 3123/ISO 3316.

‘


11011001 2 54 11.6 28 1 7.1511011006 4 102 11.6 49 1 7.3011011002 6 150 11.6 65 1 7.8511011013 13 330 11.6 140 1 12.601

11011005 14 356 11.6 150 1 12.80‘

Extension, flexible406(right hand rotation only)maximum torque 5 N m.

‘

L d RCode mm mm g S €‘

11040000 152 11.6 61 5 15.70‘

3

95

1/4''6.3

DIN3120

ISO1174-1

Universal joint407DIN 3123/ISO 3316.

‘


11020000 37 12.8 23 5 19.80‘

QuickRelease universal joint407QR

Üüwith QuickRelease safety lock.

‘


11021000 45 13 35 1 22.70‘

Adaptor409

Q1/4'' socket x 3/8'' plug (6.3 x 10), DIN 3123/ISO 3316,HPQ high performance steel.

‘


11030002 25 12.8 18 5 7.20‘

Set adaptors, 3 pieces409M/432M/514M/3

1/4'' socket x 3/8'' plug,3/8'' socket x 1/2'' plug,1/2'' socket x 3/4'' plug.

‘

RCode g S €‘

96121002 120 1 53.80‘

Adaptor409M1/4'' socket x 3/8'' plug(6.3 x 10 mm).

‘

L O RCode mm mm g S €‘

11030010 13 25 14 1 14.40‘

Adaptor410

Q1/4'' socket x 1/2'' plug (6.3 x 12.5), HPQ high performance steel.

‘


11030003 28 16.5 36 5 10.90‘

Bit holder412

Qc 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3.Internal hex drive with a collar-thrust spring (registereddesign). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). HPQ high performance steel.

‘


11180010 25 11.6 15 5 14.60‘

Bit holder412-1

Qc 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3Outer w 10 mm for use in tools with 10 mm internal hex drive or internal double hexagon (e.g. ''FLEXI'' double-ended flexi-joint spanners, T-handle universal jointspanners, box spanners, ratchet ring spanners etc.). Internal hex drive witha collar-thrust spring (registered design). Bits are easy to insert, locksecurely in position and can be removed just as easily; even hex bits witha wide groove (Type E, DIN 3126/ISO 1173). HPQ high performance steel.

‘

outside L d RCode E mm mm g S €‘

11180020 10 mm 20 11.6 11 5 12.00‘

Locking adaptor417/1with hexagon key wrenchNo 10760aCV 3/32''.

‘


96112701 42 13 23 1 28.25‘


3

96

1/4''6.3

DIN3120

ISO1174-1

Ratcheting BIT holder4008Positions selectable are clockwise/anticlockwise/fixed with fixed blade.Inner hex. with magnet, for 1/4'' screwdriver bits with outside hexagon 1/4''DIN 3126/ISO 1173 C 6.3.The square drive extension No 3115/1 can be used to adapt 1/4'' socketinserts (outer hex. to 1/4'' outer square). The ratcheting bit holder is fitted with a quick-twist knurled socket to allowthe user to tighten or untighten loosely by hand. Socket mountings aretoothed, heavy-duty and angled at 30°. Ergonomically shaped handle with1/4'' inner square drive, for use with cross-handle, extension bar etc.

‘

inside L1 L2 d RCode b '' mm mm mm g S €‘

18120000 D 6.3 1/4 56 206.5 10 185 8 36.40‘

inside b DIN 3126/ISO 1173‘

Ratcheting BIT holder set4008/27/129 piecesContent:1 Ratcheting bit holder No 40083 Bits k 1221; 1222; 12233 Bits l PZ 1221; PZ 1222; PZ 12236 Bits o 1440 T10; 1441 T15;

1442 T20; 1443 T25; 1445 T30; 1446 T40

3 Bits i 1301; 1302; 13033 Bits r 1163 0.6 x 4.5;

1165 0.8 x 5.5; 1166/1 1.2 x 6.5 mm

1 Square drive extension No 3115/1with 1/4'' outer hex. and outer square drives for attaching 1/4'' u sockets

9 Sockets No 40, 1/4'' u sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm

‘

RCode g S €‘

96181202 1025 1 143.70‘

Tools for Hi-Lok bolts

Socket set40aD/8/1Hfor Hi-Lok bolts.Content:5 Sockets with bi-hexagon No 40aD:

sizes 7/32; 1/4; 5/16; 11/32; 3/8''3 Offset Screwdrivers No 10759a:

1/16; 5/64; 3/32''1 Ratchet No 415SGH

‘

RCode g S €‘

96015303 425 1 112.65‘

Ratchet415SGHreversible, 22 teeth, patent,axially drilled pinion,locking facility for sockets.For use on Hi-Lok bolts in theaerospace industry.‘


11110002 117 22 12.5 90 5 62.50‘

Hi-Lok extensions414Hwith lock-on facility as on ratchet No 415SGH, patent.

‘


11240011 2 54 13 34 1 35.6011240012 4 102 13 49 1 36.0011240013 6 152 13 66 1 37.40‘

Offset screwdrivers10759with hexagon end for Ratchet No 415SGH, patent. Round shaft onScrewdriver enables locking of ballretainer.

‘

B L RCode size mm mm g S €‘

43062002 1 2 50 5 5 3.8043064002 2 2 100 8 5 4.10‘

Offset screwdrivers10759a‘

B L RCode size '' mm g S €‘

43560004 1 1/16 50 5 5 3.7543564004 2 1/16 100 8 5 3.7543560005 1 5/64 50 5 5 3.7543564005 2 5/64 100 8 5 3.751

43560006 1 3/32 50 5 5 3.7543564006 2 3/32 100 8 5 3.75‘

3

97

1/4''6.3

DIN3120

ISO1174-1

Socket set 1/4'' u40/9/4in sturdy sheet steel case,13 pieces Content: 9 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 10; 11;13 mm

1 ratchet No 4152 extensions No 405/2 (54 mm),

No 405/6 (150 mm) 1 universal joint No 407

‘

RCode g €‘

96010119 820 131.90‘

Socket set 1/4'' u40D/9/4in sturdy sheet steel case,13 pieces Content: 9 sockets with bi-hexagon No 40D:

sizes 4; 5; 5.5; 6; 7; 8; 10; 11;13 mm


No 405/6 (150 mm) 1 universal joint No 407

‘

RCode g €‘

96010304 852 132.40‘


sizes 3.5; 4; 4.5; 5; 5.5; 6; 7;8; 9; 10; 11; 12; 13 mm


No 405/6 (150 mm)1 universal joint No 407 1 drive handle No 4001 T-handle No 404

‘

RCode g €‘

96010124 1027 166.20‘

Socket set 1/4'' u40/13/6QR

Üüin sturdy ABS plastic case,19 piecesContent: 13 sockets with hexagon No 40:

sizes 3.5; 4; 4.5; 5; 5.5; 6; 7;8; 9; 10; 11; 12; 13 mm

1 ratchet No 415QR2 extensions No 405QR/2 (54 mm),

No 405QR/6 (150 mm)1 universal joint No 407QR 1 drive handle No 400QR 1 T-handle No 404QR

‘

RCode g €‘

96010180 765 175.95‘

Socket set 1/4'' u40/44/17/5in sturdy sheet steel case,22 pieces Content: 13 sockets with hexagon No 40:

sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13 mm

4 INHEX sockets No 44:sizes 3; 4; 5; 6 mm

1 ratchet No 4151 extension No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 4001 T-handle No 404

‘

RCode g €‘

96010113 1071 196.05‘

Socket set 1/4'' u40/44/17/5QR

Üüin sturdy ABS plastic case,22 pieces Content: 13 sockets with hexagon No 40:

sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13 mm

4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm

1 ratchet 415QR 1 extension No 405/6QR (150 mm)1 universal joint No 407QR1 drive handle 400QR1 T-handle No 404QR

‘

RCode g €‘

96010181 805 204.80‘


3

98

1/4''6.3

DIN3120

ISO1174-1


sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;11; 12; 13 mm

4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm

3 Bits k 1221: size 1; 1222: size 2; 1223: size 34 bits r 1162: 0.6 x 3.5 mm, 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm;

1168: 1.6 x 8 mm1 ratchet No 4152 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 universal joint No 4071 drive handle No 4001 T-handle No 4041 bit-holder No 412

‘

RCode g €‘

96010134 1355 229.75‘


sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;11; 12; 13 mm

4 INHEX sockets No 44:sizes 3; 4; 5; 6 mm

3 bits k No 1221: size 1; No 1222: size 2; No 1223: size 3 4 Bits r 1162: 0.6 x 3.5 mm, 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm

1168: 1.6 x 8 mm 1 ratchet No 4152 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 universal joint No 407 1 drive handle No 400 1 T-handle No 4041 bit-holder No 412

‘

RCode g €‘

96010305 1380 230.55‘

Socket set 1/4'' u40/23/6Nin sturdy sheet steel case,29 pieces Content:11 sockets with hexagon No 40:

sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

3 screwdriver sockets r No 41K:sizes 0.6 x 3.5; 1.0 x 55;1.2 x 8 mm,

5 INHEX sockets No 44K:sizes 3; 4; 5; 6; 8 mm

4 screwdriver sockets k No 44P: sizes 1; 2; 3; 41 ratchet No 4152 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 4071 drive handle No 400 1 T-handle No 404

‘

RCode g €‘

96010136 1167 229.60‘


sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

3 screwdriver sockets r No 41K:sizes 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm

4 screwdriver sockets k No 44P: sizes 1; 2; 3; 41 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 universal joint No 4071 drive handle No 400 1 T-handle No 404

‘

RCode g €‘

96010306 1120 230.35‘

Socket set 1/4'' u40/24/6in sturdy ABS plastic case,30 pieces Content: 12 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

3 screwdriver sockets r No 41K:0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

5 INHEX sockets No 44K:sizes 3; 4; 5; 6; 8 mm

2 screwdriver sockets k No 44P: sizes 1; 2 2 screwdriver sockets l No 44PZ: sizes 1; 21 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 universal joint No 407 1 drive handle No 4001 T-handle No 404

‘

RCode g €‘

96010138 895 234.15‘


Üüin sturdy ABS plastic case,30 pieces Content: 12 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

3 screwdriver sockets r No 41K:0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm

5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm2 screwdriver sockets k No 44P: sizes 1; 2 2 screwdriver sockets l No 44PZ: sizes 1; 2 1 ratchet No 415QR 2 extensions No 405QR/2 (54 mm), No 405QR/6 (150 mm)1 universal joint No 407QR 1 drive handle No 400QR1 T-handle No 404QR

‘

RCode g €‘

96010182 915 245.00‘

3

99

1/4''6.3

DIN3120

ISO1174-1

Socket set 1/4'' u40ma/25/8in sturdy sheet steel case,33 pieces Content: 25 sockets with hexagon

No 40: sizes 3.2; 3.5; 4; 4.5; 5;5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

No 40a: sizes 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 extension, flexible No 406 (152 mm) 1 universal joint No 407 1 drive handle No 4001 flexible handle No 403 1 T-handle No 404

‘

RCode g €‘

96010162 2050 274.40‘

Socket set 1/4''; 3/8'' u40/45/36/12in sturdy sheet steel case,48 pieces Content: 8 sockets with hexagon No 40:

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9 mm 12 sockets with bi-hexagon No 45:

sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm

1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8''

3 bits k 1221: size 1; 1222: size 2; 1223: size 31 bit l PZ1222: size 26 bits r 1160: 0.5 x 3 mm; 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm;

1166: 1 x 5.5 mm; 1166/1: 1.2 x 6.5 mm; 1168: 1.6 x 8 mm5 bits i 1300: 3 mm; 1301: 4 mm; 1302: 5 mm; 1303: 6 mm;

1304: 8 mm 2 ratchets No 415, No 435 3 extensions No 427/3 (76 mm), No 405/6 (150 mm),

No 427/10 (240 mm) 2 universal joints No 407, No 428 1 drive handle No 400 1 T-handle No 425 2 bit-holder No 412, No 4421 adaptor No 431

‘

RCode g €‘

96011047 3005 411.65‘


sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11 mm

10 sockets with hexagon No 52: sizes 13; 16; 17; 18; 19; 21; 22; 24; 27; 30 mm

3 INHEX sockets No 44: sizes 3; 4; 5 mm5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm2 ratchets No 415, No 5124 extensions No 405/2 (54 mm), No 509/5 (130 mm),

No 405/6 (150 mm), No 509/10 (255 mm)2 universal joints No 407, No 510 1 drive handle No 400 2 T-handles No 404, No 506

‘

RCode g €‘

96010160 5275 439.20‘

Socket set TORX® 1/4'' u40TX/44KTX/15/6

in sturdy sheet steel case,21 pieces Content: 6 sockets for external TORX®

screws No 40TX: sizes E4; E5;E6; E7; E8; E10

9 screwdriver sockets for internalTORX® screws No 44KTX: sizes T8; T9; T10; T15; T20; T25;T27; T30; T40

1 ratchet No 415 2 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 4071 drive handle No 400 1 T-handle No 404

‘

RCode g €‘

96012701 999 208.65‘

Socket set TORX® 1/4'' u88TXin sturdy sheet steel case,36 pieces Content: 10 sockets with hexagon No 40:

sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;13 mm

6 sockets for external TORX®

screws No 40TX: sizes E4; E5; E6; E7; E8; E10 5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm 9 screwdriver sockets for internal TORX® screws No 44KTX:

sizes T8; T9; T10; T15; T20; T25; T27; T30; T40 1 ratchet No 4152 extensions No 405/2 (54 mm), No 405/6 (150 mm) 1 universal joint No 407 1 drive handle No 4001 T-handle No 404

‘

RCode g €‘

98818801 1455 282.00‘


3

100

1/4''6.3

DIN3120

ISO1174-1

Socket set TORX® 1/4; 3/8; 1/2'' u89TXin sturdy sheet steel case,35 pieces Content: 3 sockets for external TORX® screws

No 40TX: sizes E4; E5; E6 2 screwdriver sockets for internal

TORX® screws No 44KTX: sizes T8; T9

4 sockets for external TORX® screws No 45TX: sizes E7; E8; E10; E12 5 screwdriver sockets for internal TORX® screws No 49TX:

sizes T10; T15; T20; T25; T276 sockets for external TORX® screws No 50TX:

sizes E11; E14; E16; E18; E20; E24 6 screwdriver sockets for internal TORX® screws No 54TX:

sizes T30; T40; T45; T50; T55; T607 bits o 1440: T10; 1441: T15; 1442: T20; 1443: T25; 1444: T27;

1445: T30; 1446: T401 bit-holder No 442 1 TORX® controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;

T25; T27; T30; T40; T45; T47; T50; T55; T60

‘

RCode g €‘

98810908 2765 339.00‘

Socket set TORX® 1/4; 1/2'' u86TXin sturdy sheet steel case,63 piecesContent:9 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11 mm

10 sockets with hexagon No 52:sizes 13; 16; 17; 18; 19; 21; 22;24; 27; 30 mm

5 sockets for external TORX® screws No 40TX: sizes E4; E5; E6; E7; E87 sockets for external TORX® screws No 50TX: sizes E10; E12; E14; E16;

E18; E20; E243 INHEX sockets No 44: sizes 3; 4; 5 mm5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm6 screwdriver sockets for internal TORX® screws No 44KTX:

sizes T8; T9; T10; T15; T20; T25 7 screwdriver sockets for internal TORX® screws No 54TX:

sizes T27; T30; T40; T45; T50; T55; T60 2 ratchets No 415, No 5124 extensions No 405/2 (54 mm), No 509/5 (130 mm),

No 405/6 (150 mm), No 509/10 (255 mm)2 universal joints No 407, No 5101 drive handle No 400 2 T-handles No 404, No 506

‘

RCode g €‘

96012702 7045 679.20‘

Socket set 1/4'' u40a/9/4in sturdy sheet steel case,13 pieces Content: 9 sockets with hexagon No 40a:

sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8;7/16; 1/2''


No 405/6 (150 mm)1 universal joint No 407

‘

RCode g €‘

96014107 920 135.05‘

Socket set 1/4'' u40aD/9/4in sturdy sheet steel case,13 pieces Content: 9 sockets with bi-hexagon

No 40aD: sizes 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2''



‘

RCode g €‘

96015302 830 134.75‘

Socket set 1/4'' u40ma/25/8in sturdy sheet steel case,33 piecesContent:25 sockets with hexagon

No 40: sizes 3.2; 3.5; 4; 4.5; 5;5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

No 40a: sizes 3/16; 7/32; 1/4; 9/32; 5/16;11/32; 3/8; 7/16; 1/2; 9/16''

1 ratchet No 4152 extensions No 405/2 (54 mm), No 405/6 (150 mm)1 extension, flexible No 406 (152 mm) 1 universal joint No 4071 drive handle No 4001 flexible handle No 4031 T-handle No 404

‘

RCode g €‘

96010162 2050 274.40‘

3

101

1/4''6.3

DIN3120

ISO1174-1

Socket set 1/4'' u40aD/12/7QR

Üüin sturdy sheet steel case,19 piecesContent:1 socket with hexagon No 40a:

size 1/8''11 sockets with bi-hexagon

No 40aD: sizes 5/32; 3/16; 7/32; 1/4;9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

1 ratchet No 415SG-QR3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm)1 universal joint No 407QR1 drive handle No 400QR1 bit-holder No 412

‘

RCode g €‘

96014208 1020 196.50‘

Socket set 1/4'' u40aD/30/7QR

Üüin sturdy sheet steel case,37 piecesContent:1 socket with hexagon No 40a:

size 1/8''11 sockets with bi-hexagon

No 40aD: sizes 5/32; 3/16; 7/32; 1/4;9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

11 sockets with bi-hexagon, long, No 40aDL: sizes 5/32; 3/16; 7/32; 1/4; 9/32;5/16; 11/32; 3/8; 7/16; 1/2; 9/16''

7 UNIFLEX sockets with bi-hexagon No 402a: sizes 1/4; 9/32; 5/16; 11/32; 3/8;7/16; 1/2''

1 ratchet No 415SG-QR3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm)1 universal joint No 407QR1 drive handle No 400QR1 bit-holder No 412

‘

RCode g €‘

96014205 2210 562.00‘

ES 1/4'' + 10760CV

175 x 350 x 41 mm, 27 pieces‘

RCode g €‘

96838110 1035 174.25‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;12 mm

‘

83812028 Empty tray 107 8.15‘

TCS 1/4'' + 10760CV

xö175 x 350 x 43 mm, 27 pieces‘

RCode g €‘

96838176 987 184.70‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;12 mm

‘


3

102

1/4''6.3

DIN3120

ISO1174-1

TCS 40/41/44/8

xö175 x 350 x 40 mm, 33 pieces‘

RCode g €‘

96830217 715 258.00‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4‘

No PZ 1221 1/4'' E, l size 1No PZ 1222 1/4'' E, l size 2

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409 3/8'' D 1/4'' a‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

TCS 40/35/9

xö175 x 350 x 40 mm, 44 pieces‘

RCode g €‘

96830601 1045 416.85‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 40L 1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4 mm‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 409 3/8'' D 1/4'' a‘

103

3/8''10

DIN3120

ISO1174-1

3

f Sockets45

P Qmetric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


02010007 7 10.5 16.5 6 24 6 12.5 19 10 6.1502010008 8 11.7 16.5 7 25 7 13.5 19 10 5.8502010009 9 13 16.5 8 25 7 13.5 19 10 5.9002010010 10 14.3 16.5 9 27 8.5 15.5 20 10 5.901

02010011 11 15.6 16.5 10 27 8.5 13.7 21 10 5.9002010012 12 16.9 17.5 11 28 9.5 14.4 24 10 5.9002010013 13 18 17.5 12 30 11.5 16.1 30 10 5.8502010014 14 19.4 17.5 13 30 11.5 15.8 28 10 6.151

02010015 15 20.6 19 14 31 12.5 19.2 30 10 6.4002010016 16 21.7 19 15 31 13.5 18.9 33 10 6.4002010017 17 23 19 16 31 12.5 18.6 44 10 6.1502010018 18 24.2 19 17 32 13.5 19.3 39 5 6.401

02010019 19 25.2 19 18 32 13.5 19 39 5 6.2502010020 20 26.2 20 19 34 15.5 20.7 51 5 8.1002010021 21 27.7 21 20 34 15.5 20.5 53 5 7.4502010022 22 28.7 21 21 35 17 21.2 61 5 7.301

02010024 24 31.5 24 21 35 18 21.2 92 5 10.20‘

f Sockets45a‘


02410016 1/4 9.7 16.5 5.2 24 6 12.5 18 10 5.9502410020 5/16 11.7 16.5 7 25 7 13.5 19 10 5.9502410022 11/32 12.5 16.5 8.1 25 7 13.5 19 10 5.9502410024 3/8 13.7 16.5 8.4 27 8.5 15.5 20 10 5.951

02410028 7/16 15.7 16.5 10 28 9.5 15.1 20 10 6.1002410032 1/2 18 17.5 11.5 30 11.5 16.5 24 10 6.1002410034 9/16 20.2 19 13.1 31 12.7 16.8 28 10 6.4502410035 19/32 20.6 19 14 31 13 19.2 36 5 7.601

02410036 5/8 21.7 19 15 31 13.5 18.9 31 5 6.8002410038 11/16 23.4 19 16.3 32 14.7 19.5 34 5 6.8002410040 3/4 25.2 19 18 32 15.9 19 41 5 7.5002410042 13/16 27.2 20.5 19.4 34 16.5 20.5 52 5 8.501

02410044 7/8 28.7 22 21 35 18 21 59 5 7.6502410046 15/16 31.5 24 22.6 35 18.5 20.7 95 5 10.1002410048 1 33 25.5 24.2 35 18.5 20.2 97 5 10.50‘

STAHLWILLE HPQ insertsSTAHLWILLE HPQ* sockets aremanufactured from selected toughsteel alloys. The result: they areextremely durable. HPQ socketsare free of cadmium and are there-fore suitable for use on titaniumalloy parts and titanium fastenersas used e.g. in the aerospace industry,where safety is a crucial factor.

*High Performance Quality

e Sockets456

P QDIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads),HPQ high performance steel, chrome plated.

‘


02110007 7 10.5 16.5 6 24 6 12.5 19 10 6.2002110008 8 11.7 16.5 7 25 7 13.5 19 10 5.8502110009 9 13 16.5 8 25 7 13.5 20 10 5.8002110010 10 14.3 16.5 9 27 8.5 15.5 20 10 5.851

02110011 11 15.6 16.5 10 27 8.5 13.7 21 10 5.9002110012 12 16.9 17.5 11 28 9.5 14.4 24 10 5.8502110013 13 18 17.5 12 30 11.5 16.1 25 10 5.7502110014 14 19.4 17.5 13 30 11.5 15.8 29 10 6.101

02110015 15 20.6 19 14 31 12.5 19.2 30 10 6.7002110016 16 21.7 19 15 31 13.5 18.9 34 10 6.8002110017 17 23 19 16 31 12.5 18.6 45 10 6.4502110018 18 24.2 19 17 32 13.5 19.3 42 10 6.801

02110019 19 25.2 19.6 18 32 13.5 19 43 10 6.4502110020 20 26.2 20.5 19 34 15.5 20.7 53 10 8.1502110021 21 27.7 21.8 20 34 15.5 20.5 59 10 7.5502110022 22 28.7 21 21 35 17 21.2 59 10 7.55‘

f Sockets460a

P QSAE AS 954-E, S.B.A.C. AS 40610/40611, ASME B 107.1,HPQ high performance steel, chrome plated.

‘


02620016 1/4 9.9 16.5 5.2 32 7 20.5 21 5 12.9002620020 5/16 11.5 16.5 7 32 8.5 20.5 22 5 12.9002620024 3/8 13.7 16.5 8.5 38 9 26.5 29 5 12.9002620028 7/16 15.7 16.5 10 38 11 24.5 33 5 12.901

02620032 1/2 17.5 17.8 11.5 44 12 30 44 5 12.90‘



104

3/8''10

DIN3120

ISO1174-1

3

f Sockets46

P Qextra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709, ASME B 107.5M,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,HPQ high performance steel, chrome plated.

d 3

t2

t1

‘

A d1 d2 d3 L t1 t2 RCode mm/'' mm mm mm mm mm mm g S €‘

02020008 8 11.7 16.5 7 54 9 42.5 36 10 12.3002020010 10 14.3 16.5 9 54 20 42.5 41 10 12.3002020011 11 15.6 16.5 10 54 20 40.7 51 10 13.2002020012 12 16.9 17.5 11 54 20 40.4 57 10 13.201

02020013 13 18 17.5 12 54 20 40.1 61 10 12.7002020014 14 19.4 17.5 13 60 25 45.8 75 10 13.2002020015 15 20.6 19 14 60 25 48.2 85 10 13.5002020016 16 21.7 19.5 15 60 25 47.9 81 10 13.801

02020017 17 23 21 16 65 30 52.6 97 10 14.0002020018 18 24.2 22 17 65 30 52.3 121 10 15.3002020019 19 25.2 23 18 65 30 52 112 10 15.3002020208 20.8-13/16 1) 27.2 25 - 65 18 - 151 10 15.001

02020021 21 27.7 25.5 20 65 30 51.5 137 5 16.8002020022 22 28.7 26.5 21 65 30 51.2 178 5 16.90‘

1) with rubber insert for spark plugs‘

f Sockets46a‘


02420016 1/4 9.7 16.5 5.2 54 9 42.5 33 5 12.9002420020 5/16 11.7 16.5 7 54 9 42.5 35 5 12.9002420024 3/8 13.7 16.5 8.4 54 20 42.5 45 5 12.5002420028 7/16 15.7 16.5 10 54 20 40.7 53 5 12.501

02420032 1/2 18 17.5 11.5 54 20 40.2 64 5 12.5002420034 9/16 20.2 19 13.1 60 25 45.8 66 5 12.9002420035 19/32 20.6 19 14 60 25 48.2 84 5 13.3002420036 5/8 21.7 19.5 15 60 25 47.9 81 5 12.901

02420038 11/16 23.4 21.5 16.3 65 30 52.5 114 5 14.8002420040 3/4 25.2 23 18 65 30 52 137 5 14.8002420042 13/16 27.2 25 19.4 65 30 51.6 130 5 14.8002420044 7/8 28.7 26.5 21 65 30 51.2 184 5 14.801

02420046 15/16 31.5 29 22.6 65 30 50.7 195 5 15.2002420048 1 33 31 24.2 65 30 50.2 205 5 15.20‘

Rubber insert5100for size 20.8 mm (No 46; 51; 51S).

‘

RCode g S €‘

09010001 5 5 1.15‘

e Spark plug socket3466

P Qextra deep, with magnet, HPQ high performance steel, chrome plated.

‘


02140036 16-5/8 21.8 25.5 15 85 7 72.9 198 5 30.00‘

f Spark plug socket4600

P Qextra deep, with rubber insert, HPQ high performance steel, chrome plated.

‘

A d1 d2 L t1 t2 RCode mm/'' mm mm mm mm mm g S €‘

02120036 16-5/8 21.7 19.5 60 15 47.8 88 10 14.40‘

e Spark plug socket4606

P Qextra deep, with rubber insert, HPQ high performance steel, chrome plated.

‘

A d1 d2 L t1 t2 RCode mm/'' mm mm mm mm mm g S €‘

02130018 18-11/16 24.2 22 65 18 52.8 132 10 14.60‘

Assembly of spark plugs on motorcycles, mopeds‘

f UNIFLEX sockets47

P QSAE AS 954-E (American sizes), HPQ high performance steel, chrome plated.

‘


02040010 10 14.3 17.5 9 45.5 7 12 51 1 33.3002040011 11 15.6 17.5 10 47.5 11 14 55 1 35.0002040012 12 16.9 17.5 11 48 11 14.5 54 1 34.2002040013 13 18.3 17.5 12 48 12 14.5 53 1 33.601

02040014 14 19.4 17.5 13 48.5 13 14.5 55 1 34.1002040015 15 20.6 17.5 14 48.5 13 14.5 56 1 34.1002040016 16 21.8 17.5 15 51.5 14 17 58 1 37.3002040017 17 23 17.5 16 53.5 15 18.5 63 1 35.701

02040018 18 24.2 17.5 17 54.5 16 18.5 61 1 37.3002040019 19 25.5 17.5 18 57 16 21 68 1 37.30‘

105

3/8''10

DIN3120

ISO1174-1

3

f UNIFLEX sockets47a‘


02440020 5/16 11.7 17.5 7 45.5 7 12.5 50 1 32.3002440024 3/8 13.7 17.5 8.5 45.5 7 12 50 1 32.3002440028 7/16 15.8 17.5 10 47.5 11 14 50 1 32.3002440032 1/2 18.3 17.5 11.5 47.5 11.5 14 57 1 32.301

02440034 9/16 19.7 17.5 13.1 48.5 13 14.5 55 1 32.3002440036 5/8 21.6 17.5 15 51.5 14 17 59 1 35.1002440038 11/16 23.5 17.5 16.3 53.5 16 18.5 58 1 35.8002440040 3/4 25.5 17.5 18 57 16 21 67 1 35.80‘

p Sockets45TX


t2

t1

d 3

‘


02270005 E5 4.7 7 16.5 2.8 28 5 16.5 23 10 8.3002270006 E6 5.7 8 16.5 3.6 28 5.5 16.5 23 10 8.3002270007 E7 6.2 9 16.5 3.8 28 6.5 16.5 24 10 8.3002270008 E8 7.5 10.5 16.5 4.3 28 7 16.5 22 10 8.301

02270010 E10 9.4 13 16.5 5.6 28 8 16.5 27 10 8.3002270012 E12 11.1 14.9 16.5 7.2 28 9.5 16.5 28 10 8.2502270014 E14 12.9 16.5 17.3 8 28 10 16.5 34 10 8.55‘

p Set: Sockets45TX/7

Qfor external TORX® screws.Content: E5; E6; E7; E8; E10; E12; E14

‘

RCode g S €‘

96022702 219 1 60.55‘

in carton packing‘

p UNIFLEX sockets47TXfor external TORX® screws, Chrome Alloy Steel, chrome plated.

‘

C d1 d2 L RCode size mm mm mm mm g S €‘

02070008 E8 7.5 11.5 19 43 56 1 29.1002070010 E10 9.4 13.8 19 44 61 1 29.1002070012 E12 11.1 16 19 46 66 1 29.1002070014 E14 12.9 17.8 19 48 75 1 29.10‘



‘


02011012 12 3/8 13.7 16.5 8.6 26.5 9 15 24 1 40.4002011014 14 7/16 16 17.3 10.4 28 11 14.5 37 1 40.4002011016 16 1/2 18 18.3 12.2 28 11.5 14 28 1 40.40‘

h Socket spline-drive45aPSP

QMS-33787, MIL-W-8982, for disassembling jet engines, series CFM 56,HPQ high performance steel, gunmetal finish.

‘


22410028 14 7/16 18.8 18.8 10.4 28 11 14.5 36 10 16.90‘


Qextra deep bolt clearance, MS-33787, MIL-W-8982,HPQ high performance steel, chrome plated.

‘


02021012 12 3/8 13.7 16.5 8.6 54 9 42.5 52 1 49.8002021014 14 7/16 16 17.3 10.4 54 11 42.5 63 1 49.80‘

f Socket45aP

P QASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),for disassembling jet engines, series CFM 56,HPQ high performance steel, gunmetal finish.

t2

t1

d 3

‘


02430020 5/16 11.9 16.5 8.1 25 7 13.5 19 10 7.35‘


106

3/8''10

DIN3120

ISO1174-1

3


‘


02050003 3 52 20 17.8 38 5 8.3502050004 4 52 20 17.8 40 5 7.8502050005 5 52 20 17.8 44 5 7.8502050006 6 52 20 17.8 46 5 7.851

02050007 7 52 20 17.8 51 5 7.8502050008 8 52 20 17.8 55 5 8.8502050010 10 52 20 17.8 62 5 8.85‘



02450008 1/8 52 20 17.8 40 5 9.9002450009 9/64 52 20 17.8 40 5 10.1002450010 5/32 52 20 17.8 40 5 9.9002450012 3/16 52 20 17.8 44 5 9.651

02450014 7/32 52 20 17.8 46 5 9.9002450016 1/4 52 20 17.8 48 5 9.9002450020 5/16 52 20 17.8 55 5 10.9002450024 3/8 52 20 17.8 61 5 11.30‘

i INHEX sockets2049for socket head screws, extra long, DIN 7422,Chrome Alloy Steel, chrome plated.

‘


02151004 4 100 68 17.8 45 5 9.7502151005 5 100 68 17.8 50 5 9.7502151006 6 100 68 17.8 57 5 9.7502151208 8 120 88 17.8 85 5 10.101

02151210 10 120 88 17.8 106 5 10.70‘

i INHEX socketsfor socket head screws, DIN 7422, special lengths,Chrome Alloy Steel, chrome plated.

‘

B L1 L2 d RCode No mm mm mm mm g S €‘

02151007 1049/7 7 100 68 17.8 66 5 15.1002152408 3049/8 8 24 6.5 19 28 5 9.5502151009 1049/9 1) 9 57 25 17.8 62 5 8.95‘

1) For brake calliper retainers on BMW and MINI.‘

n Screwdriver sockets49TXfor inside TORX® screws, Chrome Alloy Steel, chrome plated.

‘


02100009 T9 2.5 49 17 17.8 45 5 9.8502100010 T10 2.7 49 17 17.8 45 5 9.6502100015 T15 3.3 49 17 17.8 45 5 9.6502100020 T20 3.8 49 17 17.8 46 5 9.651

02100025 T25 4.4 49 17 17.8 46 5 9.6502100027 T27 5 49 17 17.8 46 5 9.6502100030 T30 5.5 49 17 17.8 47 5 9.6502100040 T40 6.6 49 17 17.8 48 5 9.651

02100045 T45 7.8 49 17 17.8 49 5 10.10‘

n Set: Screwdriver sockets49TX/8for inside TORX® screws. T9; T10; T15; T20; T25; T27; T30; T40

‘

RCode g S €‘

96021001 456 1 80.45‘


m Screwdriver sockets49Xfor tri-square socket head screws (XZN®), DIN 2324,Chrome Alloy Steel, chrome plated.

‘

L1 L2 d RCode size mm mm mm g S €‘

02060005 M5 52 20 17.8 45 5 11.0002060006 M6 52 20 17.8 47 5 11.0002060008 M8 52 20 17.8 56 5 11.0002060010 M10 52 20 17.8 63 5 11.80‘

m Screwdriver sockets3049Xfor tri-square socket head screws(XZN®), extra long, DIN 2324,Chrome Alloy Steel, chrome plated.

‘


02261208 M8 120 88 17.8 80 5 11.9002261210 M10 120 88 17.8 106 5 12.90‘

107

3/8''10

DIN3120

ISO1174-1

3

CROW-RING spanners440

PCaution! Modified settings on torque wrench (refer to note on page 196).Chrome Alloy Steel, chrome plated.

‘

A a L b a S W RCode mm '' mm mm mm mm mm g S €‘

01190008 8 1/4 23.8 12.7 8 12.3 6.3 11 1 36.7001190009 9 1/4 28.5 18.2 13.5 14 6.7 21 1 37.5001190010 10 1) 1/4 28.4 18.2 13.5 14 7.1 16 1 32.6001190011 11 1/4 28 18.2 13.5 14 8.6 17 1 36.701

01190012 12 1) 1/4 30.8 20.6 14 15.7 9 20 1 33.5001190013 13 1/4 32 22.2 14 16.4 10 20 1 32.6001190014 14 1) 1/4 31.7 22.2 14 16.4 11.1 20 1 32.6002190015 15 3/8 36.5 24.6 17.5 19.1 11.9 34 1 47.101

02190016 16 3/8 36.1 24.6 17.5 19.1 13 27 1 41.8002190017 17 2) 3/8 39.2 27.3 17.5 20.5 14 40 1 41.8002190018 18 3/8 40.8 29 18.5 21.3 14.8 45 1 41.8002190019 19 2) 3/8 40.5 29 18.5 21.3 15.8 40 1 41.001

02190020 20 3/8 42.9 31.3 18.5 22.5 15.8 54 1 43.7002190021 21 3/8 42.8 31.3 18.5 22.5 16.2 45 1 42.6002190022 22 2) 3/8 45.3 33.5 19 23.6 17 57 1 42.6002190023 23 3/8 47.5 35.7 19.5 24.6 17.5 71 1 48.101

02190024 24 2) 3/8 47.3 35.7 19.5 24.6 18 57 1 42.6002190025 25 3/8 49.3 37.7 20 25.7 19 80 1 49.3002190026 26 3/8 49.3 37.7 20 25.7 19 63 1 43.7002190027 27 3/8 52.8 40 21.4 28.2 20 100 1 50.001

02191027 27DC 3)3/8 57.1 42.1 15 29.3 20 92 1 51.5003190028 28 1/2 56.8 42.1 22.5 29.3 21 120 1 51.5003190030 30 1/2 63 48 22.5 32.5 22 155 1 53.5003190032 32 1/2 62.5 48 22.5 32.5 24 137 1 55.501

03190034 34 1/2 64.2 50 24 33.5 27 148 1 55.5003190036 36 1/2 66.5 51.9 24 34.6 27 150 1 57.0003190038 38 1/2 68.1 53.9 24 35.6 28.6 147 1 61.0003190040 40 1/2 71.8 57.9 24.5 37.7 31 160 1 69.001

03190041 41 1/2 71.8 57.9 24.5 37.7 31 169 1 62.0003190042 42 1/2 71 57.9 24.5 37.7 33.2 189 1 69.0003190046 46 1/2 77.7 64.2 26 40.9 34.1 215 1 70.5003190050 50 1/2 83.2 70.5 27.5 44.1 39.7 295 1 90.00‘

1) For union nuts on fuel injection leads on 4-cylinder Mercedes-Benzdiesel engines

2) For use on suction or pressure lines within expansion valve of airconditioning unit (Mercedes-Benz)

3) Slim-line version for setting of electronic injection on 440-HP-enginesMercedes-Benz series OM 442

‘

CROW-RING spanners440a‘

A a L b a S W RCode '' '' mm mm mm mm mm g S €‘

01490024 3/8 1) 1/4 28.4 18.2 13.5 14 7.1 14 1 35.0001490028 7/16 1/4 28 18.2 13.5 14 8.6 14 1 35.0001490032 1/2 1/4 30.5 20.6 14 15.7 10 19 1 35.0001490034 9/16 1/4 31.7 22.2 14 16.4 11.1 23 1 35.001

02490036 5/8 3/8 36.5 24.6 17.5 19.1 11.9 33 1 42.9002490038 11/16 3/8 39.2 27.3 17.5 20.5 14 36 1 42.9002490040 3/4 3/8 40.9 29 18.5 21.3 14.2 44 1 42.9002490042 13/16 3/8 42.9 31.3 18.5 22.5 15.8 51 1 42.901

02490044 7/8 3/8 45.2 33.5 19 23.6 17.5 62 1 43.6002490046 15/16 3/8 47.2 35.7 19.5 24.6 18.3 63 1 44.7002490048 1 3/8 49.3 37.7 20 25.7 19 71 1 44.7002490050 1 1/16 3/8 52.8 40 21.4 28.2 20 84 1 44.701

03490052 1 1/8 1/2 56.8 42.1 22.5 29.3 21 110 1 44.7003490056 1 1/4 1/2 62.5 48 22.5 32.5 23.8 137 1 48.7003490058 1 5/16 1/2 62.3 48 22.5 32.5 24.6 130 1 51.5003490060 1 3/8 1/2 64.2 50 24 33.5 27 138 1 51.501

03490062 1 7/16 1/2 66.5 51.9 24 34.6 27 143 1 56.0003490064 1 1/2 1/2 68.1 53.9 24 35.6 28.6 152 1 56.0003490065 1 9/16 1/2 70.1 55.9 24 36.7 29.4 172 1 64.0003490066 1 5/8 1/2 71.8 57.9 24.5 37.7 31 169 1 64.001

03490068 1 3/4 1/2 75.6 62 25.5 39.8 33.2 199 1 74.5003490069 1 13/16 1/2 77.7 64.2 26 40.9 34.1 229 1 74.5003490072 2 1/2 83.2 70.5 27.5 44.1 39.7 277 1 80.5003490076 2 1/4 1/2 91.2 78.7 29.5 48.2 42.8 337 1 90.501

03490077 2 5/16 1/2 93.3 80.9 30 49.2 43.6 309 1 109.0003490078 2 3/8 1/2 95.2 83 30.5 50.2 46 385 1 113.00‘

1) For Volvo aero-engines, types ''JAS''‘

CROW-RING spanners440S MJ

QSupersedes No 440 MJ Caution! Modified settings on torque wrench (refer to note on page 196),EN 4108, for pipe unions with straight cylindrical involute toothing, HPQ high performance steel, chrome plated.

‘

Threaded G a L b a S W RCode nut mm '' mm mm mm mm mm g S €‘

01211010 MJ10 DN04 1/4 31.9 22 8 17 6.5 25 1 170.0001211014 MJ14 DN06 1/4 36.5 27 8 19.5 8.5 30 1 188.0002211016 MJ16 DN08 3/8 43.8 31 8 24 10.5 50 1 191.0002211018 MJ18 DN10 3/8 45.2 33 8 25 13 45 1 194.001

02211020 MJ20 DN12 3/8 46.2 35 8 26 15 50 1 199.0002211022 MJ22 DN14 3/8 48.4 37 9 27 17.5 55 1 203.0002211024 MJ24 DN16 3/8 49.5 39 9 28 19.7 60 1 205.0002211027 MJ27 DN18 3/8 54.4 44 10 31 21.5 75 1 209.001

02211030 MJ30 DN20 3/8 60.8 50 10 36 23.7 95 1 214.00‘


108

3/8''10

DIN3120

ISO1174-1

3

CROW-FOOT spanners540Caution! Modified settings on torque wrench (refer to note on page 196),Chrome Alloy Steel, chrome plated.

‘

A a L b a S RCode mm '' mm mm mm mm g S €‘

01200008 8 1/4 25.5 19.8 6.3 14.6 21 1 26.6001200009 9 1/4 25.5 19.8 6.3 14.6 21 1 26.6001200010 10 1/4 25.5 19.8 6.3 14.6 20 1 26.6002200011 11 3/8 32 22.2 6.3 17.4 36 1 28.001

02200012 12 3/8 34.3 25.4 6.3 18.2 37 1 25.9002200013 13 3/8 34.3 25.4 6.3 17.8 36 1 25.9002200014 14 3/8 37.7 30 6.3 20.8 46 1 24.1002200015 15 3/8 37.7 30 6.3 20.4 45 1 30.901

02200016 16 3/8 37.7 30 6.3 19.9 45 1 31.5002200017 17 3/8 42.5 38 6.3 23.8 62 1 29.1002200018 18 3/8 42.5 38 6.3 22.9 61 1 34.2002200019 19 3/8 42.5 38 6.3 22.4 64 1 29.101

02200020 20 3/8 42.4 38 6.3 25 55 1 39.3002200021 21 3/8 44.5 41 6.3 23.6 59 1 39.3002200022 22 3/8 44.5 41 6.3 24.2 64 1 39.3002200023 23 3/8 44.5 41 6.3 25.8 63 1 42.301

02200024 24 3/8 44.4 41 6.3 26.2 60 1 40.1002200025 25 3/8 47 45 8 26.4 75 1 42.3002200026 26 3/8 47 45 8 27.6 80 1 40.7002200027 27 3/8 47 45 8 27.6 76 1 39.701

02200028 28 3/8 50 50 8 29.3 78 1 43.0002200030 30 3/8 50 50 8 29.3 84 1 39.7002200032 32 3/8 53 57 8 30.5 95 1 39.7002200034 34 3/8 54.5 60 8 31.6 107 1 43.301

02200036 36 3/8 56.5 62 8 32.8 100 1 49.2002200040 40 3/8 63 70 8 37.6 130 1 60.5002200041 41 3/8 63 70 8 37.2 130 1 71.0002200042 42 3/8 63 70 8 37.7 125 1 71.001

02200046 46 3/8 72 82 8 43.1 191 1 84.0002200050 50 3/8 75 88 8 45.4 217 1 84.00‘

CROW-FOOT spanners540a‘

A a L b a S RCode '' '' mm mm mm mm g S €‘

01500024 3/8 1/4 25.5 19.8 6.3 14.6 17 1 26.3002500028 7/16 3/8 32 22.2 6.3 17.2 34 1 26.9002500032 1/2 3/8 34.3 25.4 6.3 18.1 37 1 26.3002500034 9/16 3/8 37.7 30 6.3 20.9 40 1 26.301

02500036 5/8 3/8 37.7 30 6.3 20.4 44 1 31.4002500038 11/16 3/8 42.5 38 6.3 24.1 62 1 31.4002500040 3/4 3/8 42.5 38 6.3 24 66 1 31.4002500042 13/16 3/8 42.3 38 6.3 24 59 1 34.201

02500044 7/8 3/8 44.5 41 6.3 25.8 65 1 39.7002500048 1 3/8 47 45 8 26.7 78 1 39.7002500050 1 1/16 3/8 47 45 8 27.2 78 1 39.7002500052 1 1/8 3/8 50 50 8 28.5 84 1 38.301

02500054 1 3/16 3/8 50 50 8 29.2 83 1 39.7002500056 1 1/4 3/8 53 57 8 30.3 101 1 39.7002500058 1 5/16 3/8 53 57 8 31.2 101 1 40.7002500060 1 3/8 3/8 54.5 60 8 32.3 105 1 39.701

02500062 1 7/16 3/8 56.5 62 8 33.1 107 1 49.2002500064 1 1/2 3/8 58 65 8 34.5 118 1 49.2002500065 1 9/16 3/8 59.5 68 8 35.7 126 1 50.5002500066 1 5/8 3/8 63 70 8 37.3 140 1 66.001

02500067 1 11/16 3/8 63 70 8 37.7 126 1 69.5002500068 1 3/4 3/8 68 76 8 40.4 161 1 73.5002500070 1 7/8 3/8 72 82 8 42 205 1 79.5002500072 2 3/8 75 88 8 44.8 214 1 82.001

02500074 2 1/8 3/8 75.6 91 10 46 265 1 106.0002500076 2 1/4 3/8 80.5 96 10 49.5 297 1 109.0003500078 2 3/8 1/2 81.5 96 8 51.3 214 1 112.00‘

CROW-FOOT spanners Heavy Duty540a HDFor particularly high loadings, e.g. stainless steel screw fittings. Full use of jaws in conjunction with standard ratchets. Caution! Modified settings on torque wrench (refer to note on page 196),chrome plated. Supplied without ratchet.

‘

A a L b a S RCode '' '' mm mm mm mm g S €‘

02501034 9/16 3/8 43.4 32 11 26.8 72 1 34.2002501036 5/8 3/8 45 34.8 11 27.7 79 1 40.4002501038 11/16 3/8 47.2 38 11 28.6 87 1 40.9002501042 13/16 3/8 51 46.4 11 30.5 114 1 43.001

02501044 7/8 3/8 52 48 11 31.3 118 1 51.5002501046 15/16 3/8 54 51.2 11 32.3 130 1 51.5002501048 1 3/8 56 53.4 11 33.2 137 1 51.5002501050 1 1/16 3/8 57 53.8 11 34.1 136 1 51.501

02501052 1 1/8 3/8 59 53.8 11 35 140 1 51.5002501056 1 1/4 3/8 62 60 11 36.8 168 1 52.5002501062 1 7/16 3/8 66.5 66 11 39.6 192 1 64.5003501064 1 1/2 1/2 76 70 16 45 358 1 65.001

03501069 1 13/16 1/2 85 84 16 49.6 470 1 67.5003501072 2 1/2 89 90 16 52.3 505 1 107.0003501074 2 1/8 1/2 91.5 92.8 16 54.2 523 1 130.0003501075 2 3/16 1/2 93 96 16 55.1 545 1 138.001

03501076 2 1/4 1/2 95 99 16 56 568 1 139.00‘

109

3/8''10

DIN3120

ISO1174-1

3

f Adaptor447

P QCaution! Modified settings on torque wrench (refer to note on page 196),American sizes: SAE AS 954-E, HPQ high performance steel, gunmetal finish.

‘

A d1 d2 h1 h2 S RCode mm mm mm mm mm mm g S €‘

02181007 7 11.5 19 6 11 50.8 30 1 25.7002181008 8 12.4 19 6 11 50.8 30 1 25.7002181009 9 14 19 8 11 50.8 40 1 26.4002181010 10 15.6 19 8 11 50.8 40 1 26.401

02181013 13 19.3 19 9.2 11 50.8 55 1 28.00‘

f Adaptor447a‘

A d1 d2 h1 h2 S RCode '' mm mm mm mm mm g S €‘

02470016 1/4 10.4 19 6 11 50.8 27 1 25.8002470020 5/16 12.4 19 6 11 50.8 29 1 25.1002470024 3/8 14.9 19 8 11 50.8 41 1 25.1002470028 7/16 17 19 8 11 50.8 40 1 25.901

02470032 1/2 19 19 9.2 11 50.8 56 1 25.9002470034 9/16 21 19 9.2 11 50.8 61 1 28.0002470036 5/8 23 19 12 11 50.8 73 1 28.00‘

h Spline-Drive adaptor447aSP

QCaution! Modified settings on torque wrench (refer to note on page 196),MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish.

‘

Spline A d1 d2 h1 h2 S RCode size '' mm mm mm mm mm g S €‘

02480014 7 7/32 9.4 19 6 11 50.8 27 1 36.7002480016 8 1/4 10.4 19 6 11 50.8 27 1 36.7002480018 9 9/32 11.5 19 6 11 50.8 29 1 36.7002480020 10 5/16 12.4 19 6 11 50.8 29 1 36.701

02480024 12 3/8 14.9 19 8 11 50.8 40 1 36.7002480028 14 7/16 17 19 9.2 11 50.8 50 1 37.7002480032 16 1/2 19 19 9.2 11 50.8 59 1 38.8002480034 18 9/16 21 19 9.2 11 50.8 55 1 38.801

02480036 20 5/8 23 19 12 11 50.8 74 1 39.80‘

Clip strips45CLfor socket retention, with 9 or 10 retaining clips.Supplied without sockets.

‘


80450001 1 200 40 5 5.6080450002 2 300 58 5 5.60‘


Ratchet422fine tooth, reversible, 60 teeth, with 2-component handle, for use in confined spaces,re-engages after movement of 6°, DIN 3122/ISO 3315.

‘


12231011 194 32 24 236 1 39.00‘


‘


12111010 193 29 17.9 245 5 49.60‘


Üüreversible, 30 teeth,with QuickRelease safety lock and 2-component handle, DIN 3122/ISO 3315.

‘


12110020 193 29 17.9 244 1 53.00‘


Üüreversible, 30 teeth, with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.

‘


12110030 193 29 17.9 275 1 56.50‘


110

3/8''10

DIN3120

ISO1174-1

3

Ratchet adaptor445reversible, 20 teeth.

‘


12140000 53 30 135 1 106.00‘

RATCHFIX ratchet450*reversing lever near handle,30 teeth, DIN 3122/ISO 3315.

‘


12150001 196 30 16 249 1 40.00‘


Flexible joint ratchet452reversible, 60 teeth, handle may beraised or lowered by approx. 90°.Lockable in following positions:straight, 30° up, 60° up, 30° down.Unlocked by depressing button in handle, registered design.

‘


12260001 300 34 24 505 1 69.50‘


7350/5

Content:1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

‘

RCode g S €‘

59251005 85 1 26.20‘


Spare parts set for ratchets No 435, 435SG, 438, 439

4350

Content:1 pinion; 1 pawl; 1 lever with pin; 1 ball;2 compression springs; 2 screws

‘

RCode g S €‘

19020000 50 1 24.80‘

for ratchets from 1992‘

Spare parts set for ratchetsNo 435QR, 435SG-QR

4350QR

ÜüContent:1 pinion; 1 Pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws

‘

RCode g S €‘

19020020 51 1 27.70‘

Speeder brace421working radius 85 mm,DIN 3122/ISO 3315.

‘


12100010 386.5 385 5 29.90‘

Speeder brace453with steel handle, for greater axial power transmission,detachable palm head, working radius 85 mm,DIN 3122/ISO 3315.

‘


12100002 408 619 1 69.00‘


‘


12061010 253.5 222 1 36.30‘


‘


12070000 165 133 5 12.70‘



‘


12071000 165 148 1 14.60‘


‘


12010005 1.5 38 17 36 5 9.5512010001 3 76 17 67 5 9.8012010006 5 125 17 104 5 10.4012010002 6 160 17 127 5 11.101

12010003 10 240 17 188 5 12.4012010004 18 455 17 345 5 34.70‘

111

3/8''10

DIN3120

ISO1174-1

3

Extensions with wobble-drive427Wswivel angle 15° each side, max. torque 80 N m.

‘


12010007 3 76 17 67 5 12.0012010008 5 125 17 104 5 13.7012010009 6 160 17 127 5 14.50‘



‘


12011001 3 76 17 66 1 11.4012011002 6 160 17 127 1 12.8012011003 10 240 17 185 1 14.30‘

Locking adaptor433/1with hexagon key wrench No 10760aCV 1/8''.

‘


96122701 52 18 57 1 32.05‘

Extension, flexible434(right hand rotation only),maximum torque 7 N m.

‘


12040000 194 17 109 5 23.80‘

Special extension1225

‘


12250001 150 17 128 5 18.60‘

Special extension13220for removing Boroscope plugs, with Boroscope plug locking,external hexagon size 16 mm.

‘


12270020 355 362 1 169.00‘


‘


12020000 46 18.8 55 5 22.80‘



‘


12021000 60 19 66 1 27.10‘

Adaptor431

Q3/8'' socket x 1/4'' plug (10 x 6.3),maximum torque 62 N m, DIN 3123/ISO 3316,HPQ high performance steel.‘


12030001 28 17.2 26 5 8.80‘

Adaptor432

Q3/8'' socket x 1/2'' plug (10 x 12.5),DIN 3123/ISO 3316, HPQ high performance steel.

‘


12030003 31 17.2 36 5 8.75‘



‘

RCode g S €‘

96121002 120 1 53.80‘


112

3/8''10

DIN3120

ISO1174-1

3

Adaptor432M3/8'' socket x 1/2'' plug(10 x 12.5 mm).

‘


12030010 16 32 22 1 17.30‘

Bit holder442c 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3.Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘


12180026 32 16.5 30 5 17.00‘

Bit holder443c 5/16'' inside hexagon, DIN 3126/ISO 1173 D 8.Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securelyin position and can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘


12180030 32 16.5 39 5 18.00‘

Socket set 3/8'' u45/11/4in sturdy sheet steel case,15 piecesContent:11 sockets with bi-hexagon No 45:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19 mm



‘

RCode g €‘

96020109 1602 181.85‘

Socket set 3/8'' u456/11/4in sturdy sheet steel case,15 piecesContent:11 sockets with hexagon No 456:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19 mm



‘

RCode g €‘

96021133 1780 183.20‘

Socket set 3/8'' u45/14/5iin sturdy sheet steel case,19 piecesContent:14 sockets with bi-hexagon No 45:

sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22 mm


No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020132 1866 215.25‘

Socket set 3/8'' u456/14/5iin sturdy sheet steel case,19 piecesContent:14 sockets with hexagon No 456:

sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22 mm



‘

RCode g €‘

96021132 1866 216.85‘

Socket set 3/8'' u45/14/5iQR

Üüin a sturdy ABS plastic case,19 piecesContent:14 sockets with bi-hexagon No 45:

sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22 mm

1 ratchet No 435QR2 extensions No 427QR/3 (76 mm), No 427QR/10 (240 mm)1 T-handle No 425QR1 universal joint No 428QR

‘

RCode g €‘

96020180 1650 226.85‘


sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19 mm

1 socket with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8''

1 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020234 1939 214.85‘

113

3/8''10

DIN3120

ISO1174-1

3


sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19 mm

1 socket with bi-hexagon, long, with rubber insert, No 4600: size 16 mm - 5/8''

1 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 425 1 universal joint No 428

‘

RCode g €‘

96020202 1970 216.10‘

Socket set 3/8'' u45ma/28/5in sturdy sheet steel case,33 pieces Content: 28 sockets with bi-hexagon

No 45: sizes 7; 8; 9; 10; 11; 12;13; 14; 15; 16; 17; 18; 19;20; 21; 22 mm

No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16;1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8''

1 ratchet No 435 2 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020122 3040 318.35‘

Socket set 3/8'' u45/49/19/5in sturdy sheet steel case,24 piecesContent:11 sockets with bi-hexagon

No 45: sizes 8; 10; 11; 12; 13; 14;15; 16; 17; 18; 19 mm


7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm1 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020223 2675 275.60‘

Socket set 3/8'' u456/49/19/5in sturdy sheet steel case,24 piecesContent:11 sockets with hexagon No 456:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19 mm

1 socket with bi-hexagon, long,with rubber insertNo 4600: size 16 mm - 5/8''

7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm1 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020236 2749 276.95‘

Socket set 3/8'' u89Nin sturdy sheet steel case,44 piecesContent:15 sockets with bi-hexagon

No 45: sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm

2 sockets with bi-hexagon, long, with rubber insert,No 4600: size 16 mm - 5/8'',No 46: size 20.8 mm - 13/16''

7 INHEX sockets No 49:sizes 3; 4; 5; 6; 7; 8; 10 mm

15 combination spanners No 13:sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm


‘

RCode g €‘

96020128 5225 488.70‘



114

3/8''10

DIN3120

ISO1174-1

3


sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9 mm 12 sockets with bi-hexagon No 45:

sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm


3 bits k 1221: size 1; 1222: size 2; 1223: size 31 bit l PZ1222: size 26 bits r 1160: 0.5 x 3 mm; 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm;

1166: 1 x 5.5 mm; 1166/1: 1.2 x 6.5 mm; 1168: 1.6 x 8 mm5 bits i 1300: 3 mm; 1301: 4 mm; 1302: 5 mm; 1303: 6 mm;

1304: 8 mm 2 ratchets No 415, No 435 3 extensions No 427/3 (76 mm), No 405/6 (150 mm),

No 427/10 (240 mm) 2 universal joints No 407, No 428 1 drive handle No 400 1 T-handle No 425 2 bit-holder No 412, No 4421 adaptor No 431

‘

RCode g €‘

96011047 3005 411.65‘

Socket set 3/8'' u45/41/9in sturdy sheet steel case,50 piecesContent:11 sockets with bi-hexagon

No 45: sizes 8; 10; 11; 12; 13; 14;15; 16; 17; 18; 19 mm

9 sockets with bi-hexagon, long,No 46: sizes 10; 11; 12; 13; 14; 15; 17; 18; 19 mm

2 sockets with bi-hexagon, long,with rubber insertNo 4600: size 16 mm - 5/8''; No 46: size 20.8 mm - 13/16''

10 UNIFLEX sockets with bi-hexagon No 47: sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm

5 INHEX sockets No 49: size 4; 5; 6; 8; 10 mm4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 41 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 flexible handle No 4241 T-handle No 4251 universal joint No 4281 flexible extension No 4341 bit-holder No 443

‘

RCode g €‘

96020108 6521 898.20‘

Socket set TORX® 3/8'' u45TX/49TX/15/5

in sturdy sheet steel case,20 piecesContent:7 sockets for external TORX®

screws No 45TX: sizes E5; E6; E7;E8; E10; E12; E14

8 screwdriver sockets for internalTORX® screws No 49TX:sizes T9; T10; T15; T20; T25; T27; T30; T40

1 ratchet No 4352 extensions No 427/5 (125 mm), No 427/10 (240 mm)1 universal joint No 4281 T-handle No 425

‘

RCode g €‘

96022703 2005 271.25‘

Socket set TORX® 1/4; 3/8; 1/2'' u89TXin sturdy sheet steel case,35 piecesContent:3 sockets for external TORX® screws

No 40TX: sizes E4; E5; E6

2 screwdriver sockets for internalTORX® screws No 44KTX: sizes T8; T9

4 sockets for external TORX® screws No 45TX: sizes E7; E8; E10; E125 screwdriver sockets for internal TORX® screws No 49TX:


sizes E11; E14; E16; E18; E20; E246 screwdriver sockets for internal TORX® screws No 54TX:


1445: T30; 1446: T401 bit-holder No 4421 TORX® controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;

T25; T27; T30; T40; T45; T47; T50; T55; T60

‘

RCode g €‘

98810908 2765 339.00‘

Socket set 3/8'' u45/49/32/5TX

in sturdy sheet steel case,37 piecesContent:11 sockets with bi-hexagon No 45:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19 mm

7 sockets for external TORX®

screws No 45TX: sizes E5; E6;E7; E8; E10; E12; E14

6 INHEX sockets No 49: sizes 4; 5; 6; 7; 8; 10 mm8 screwdriver sockets for internal TORX® screws No 49TX:

sizes T9; T10; T15; T20; T25; T27; T30; T401 ratchet No 4352 extensions No 427/3 (76 mm), No 427/10 (240 mm)1 T-handle No 4251 universal joint No 428

‘

RCode g €‘

96020119 3234 388.65‘

115

3/8''10

DIN3120

ISO1174-1

3

Socket set 3/8'' u45a/12/5in sturdy sheet steel case,17 pieces Content: 11 sockets with bi-hexagon No 45a:

sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16;5/8; 11/16; 3/4; 13/16''

1 socket with bi-hexagon, long, with rubber insert No 4600: size 16 mm - 5/8'',


‘

RCode g €‘

96024204 1914 213.85‘

Socket set 3/8'' u45ma/28/5in sturdy sheet steel case,33 piecesContent:28 sockets with bi-hexagon

No 45: sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19;20; 21; 22 mm

No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8''


‘

RCode g €‘

96020122 3040 318.35‘

Socket set 3/8'' u45a/14/8QR

Üüin sturdy sheet steel case,22 piecesContent:14 sockets with bi-hexagon No 45a:

sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16;5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1''

1 ratchet No 435SG-QR3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm),

No 427/10QR (240 mm)1 universal joint No 428QR2 bit-holders No 442, No 4431 speeder brace No 453

‘

RCode g €‘

96024206 3637 362.10‘

Socket set 3/8'' u45a/22/8QR

Üüin sturdy sheet steel case,30 pieces Content: 14 sockets with bi-hexagon No 45a:

sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16;5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1''

8 UNIFLEX sockets with bi-hexagon No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4’’

1 ratchet No 435SG-QR3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm),

No 427/10QR (240 mm)1 universal joint No 428QR2 bit-holders No 442, No 4431 speeder brace No 453

‘

RCode g €‘

96024207 3947 630.30‘

Socket set 3/8'' u45a/33/13in sturdy sheet steel case,46 piecesContent:10 sockets with bi-hexagon No 45a:

sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2;9/16; 5/8; 11/16; 3/4''

2 sockets with bi-hexagon, long, with rubber insert,No 4600: size 16 mm - 5/8'',No 46: size 20.8 mm - 13/16''

7 sockets with bi-hexagon, long,No 46a: sizes 3/8; 7/16; 1/2; 9/16; 11/16; 3/4; 7/8''

7 UNIFLEX sockets with bi-hexagon No 47a: sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''

3 INHEX sockets No 49a: sizes 1/8; 5/32; 3/16'' 4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 4 2 ratchets No 415, No 4351 ratchet adaptor No 4453 extensions No 427/3 (76 mm), No 427/6 (160 mm),

No 427/10 (240 mm)1 flexible extension No 434 (194 mm)1 adaptor No 4091 speeder brace No 4211 flexible handle No 4241 T-handle No 4251 universal joint No 4281 bit-holder No 443

‘

RCode g €‘

96024113 6540 908.00‘


116

3/8''10

DIN3120

ISO1174-1

3

ES 456/16/6

175 x 350 x 40 mm, 22 pieces‘

RCode g €‘

96838111 1555 230.30‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/6 3/8'' D a 160 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 435 3/8'' D‘

83812032 Empty tray 103 8.15‘

TCS 456/16/7

xö175 x 350 x 40 mm, 23 pieces‘

RCode g €‘

96830218 1400 248.80‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

TCS 456/16/4 MF

xö175 x 350 x 45 mm, 20 pieces‘

RCode g €‘

96830357 1123 222.15‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 435 3/8'' D‘

TCS 456/31/8

xö

350 x 350 x 32 mm, 39 pieces‘

RCode g €‘

96830602 2701 658.15‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 46 3/8'' a sizes 10; 11; 12; 13 mm‘

No 47 3/8'' a sizes 10; 11; 12; 13; 14; 15; 16 mm

‘

No 1049 3/8'' a size 9 mm‘

No 49X 3/8'' a sizes M6; M8; M10‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 452 3/8'' D‘



With yellow signal cut-outs to show whether all tools are in their places

117

1/2''12.5

DIN3120

ISO1174-1

3

f Sockets50

P Qmetric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641,SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


03010008 8 13 22 7 38 9 22 56 10 6.7503010009 9 13.7 22 8 38 9 22 57 10 6.9503010010 10 14.5 22 9 38 9 22 57 10 5.6503010011 11 15.8 22 10 38 9.5 22 52 10 5.901

03010012 12 17 22 11 38 13 22 58 10 5.8503010013 13 18.3 22 12 38 13 22 60 10 5.6503010014 14 19.9 22.7 13 38 13 20.5 60 10 6.1003010015 15 21.2 22.7 14 38 13.5 20.2 62 10 6.401

03010016 16 22.4 23.7 15 38 13.5 19.6 63 10 6.2503010017 17 24 23.7 15.2 38 15 19.6 66 10 6.6503010018 18 24.7 23.7 17 38 15.5 19.1 71 10 7.0503010019 19 26.2 25 18 38 16 21.7 78 10 6.651

03010020 20 27.2 25 19 42 17 25.5 89 10 7.4503010021 21 28.7 26 20 42 18 25.2 104 10 7.8503010022 22 29.7 26 21 42 18 24.9 113 10 7.1503010023 23 30.7 26 20 42 18 25.4 114 5 8.901

03010024 24 32 26 21 42 18.5 24.9 117 5 7.9003010025 25 33.2 25 22 42 18.5 24.6 119 5 10.5003010026 26 34.4 25 23 42 18.5 24.3 122 5 10.1003010027 27 36.2 26 24 45 19.5 27 150 5 10.101

03010028 28 37.4 27 25 45 19.5 26.7 158 5 11.8003010030 30 39.7 28 27 45 20.5 26.1 171 5 10.6003010031 31 42.2 28 28 47 22 27.9 215 5 14.5003010032 32 42.2 28 29 47 22 27.6 189 5 10.901

03010034 34 45 28 31 47 22 27 209 5 16.50‘

f Sockets50a‘


03410024 3/8 14.3 22 8.3 38 9 22 57 10 6.2503410028 7/16 16.3 22 9.9 38 9 22 59 10 6.2503410032 1/2 18.3 22 11.5 38 13 22 59 10 6.2003410034 9/16 20.3 22.7 13.1 38 13 20.2 62 10 7.001

03410035 19/32 21.3 22.7 13.5 38 13.5 20.1 61 10 7.0003410036 5/8 22.4 23.7 15 38 13.5 19.6 62 10 7.0003410038 11/16 24.2 23.7 16.5 38 15.5 19.2 68 10 7.1003410040 3/4 26.2 25 18 38 16 21.7 78 10 7.101

03410041 25/32 27 25 18.6 41 16 24.6 90 5 7.7503410042 13/16 28.2 25 19.4 41 16.5 24.3 95 5 7.9503410044 7/8 29.7 26 21 42 18 24.9 111 5 8.4503410046 15/16 32 26 22.6 42 18.5 24.4 121 5 8.701

03410048 1 33.7 27 24.2 42 18.5 24 135 5 9.3003410050 1 1/16 36.2 26 25.8 45 19.5 26.5 155 5 10.8003410052 1 1/8 38.1 28 27.4 45 20 26 167 5 10.9003410054 1 3/16 39 28 28 45 20.5 25.9 178 5 11.201

03410056 1 1/4 40 28 30.5 45 21 25.1 196 5 11.2003410058 1 5/16 41.8 28 32.1 47 22 26.7 210 5 14.1003410060 1 3/8 46 28 33.7 50 23 29.2 232 5 17.4003410062 1 7/16 49.4 31 34 54 26 33.1 320 5 19.701

03410064 1 1/2 51 31 35 54 26 32.8 330 5 19.90‘

e Sockets52

P QDIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads),HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


03030008 8 13 22 7 38 9 22 56 10 6.3503030009 9 13.7 22 8 38 9 22 56 10 6.5003030010 10 14.5 22 9 38 9 22 60 10 5.5003030011 11 15.8 22 10 38 9.5 22 58 10 5.851

03030012 12 17 22 11 38 13 22 52 10 5.7503030013 13 18.3 22 12 38 13 22 51 10 5.6503030014 14 19.9 22.7 13 38 13 20.5 59 10 5.9003030015 15 21.2 22.7 14 38 13.5 20.2 63 10 6.351

03030016 16 22.4 23.7 15 38 13.5 19.6 65 10 6.3003030017 17 24 23.7 15.2 38 15 19.6 70 10 6.6503030018 18 24.7 23.7 17 38 15.5 19.1 73 10 6.9503030019 19 26.2 25 18 38 16 21.7 79 10 6.651

03030020 20 27.2 25 19 42 17 25.5 95 10 7.5003030021 21 28.7 26 20 42 18 25.2 110 10 7.7503030022 22 29.7 26 21 42 18 24.9 115 10 7.1503030023 23 30.7 26 20 42 18 25.4 119 5 8.901

03030024 24 32 26 21 42 18.5 24.9 125 5 7.9003030025 25 33.2 26 22 42 18.5 24.6 128 5 10.5003030026 26 34.4 25 23 42 18.5 24.3 132 5 9.9503030027 27 36.2 26 24 45 19.5 27 161 5 9.851

03030028 28 37.4 27 25 45 19.5 26.7 166 5 12.0003030030 30 39.7 28 27 45 20.5 26.1 186 5 9.8503030032 32 42.2 28 29 47 22 27.6 200 5 10.4003030034 34 45 28 31 47 22 27 235 5 14.00‘

ES 52/17

175 x 350 x 47 mm, 17 pieces‘

RCode g €‘

96838112 1760 130.10‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

83812030 Empty tray 107 8.15‘


118

1/2''12.5

DIN3120

ISO1174-1

3

TCS 52/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838177 1605 140.55‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

TCS 52/18 MF

xö175 x 350 x 55 mm, 18 pieces‘

RCode g €‘

96830359 1850 159.15‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32; 34 mm

‘

TCS 50/51/52/32

xö175 x 350 x 50 mm, 32 pieces‘

RCode g €‘

96838191 2950 265.20‘

No 50 1/2'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 30 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 51 1/2'' a sizes 22; 27 mm‘

TCS 50a/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838780 1600 161.15‘

No 50a 1/2'' a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8;11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''

‘

f Sockets51

P Qextra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709, ASME B 107.5M,American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


03020010 10 14.5 22 9 83 19 67 90 10 16.2003020013 13 18.3 22 12 83 35 67 122 10 14.0003020014 14 19.9 22.7 13 83 35 65.2 129 10 15.0003020015 15 21.2 22.7 14 83 35 64.9 132 10 16.101

03020016 16 22.4 23.7 15 83 35 64.6 145 10 16.4003020216 16-5/8 1) 22.4 23.7 15.4 83 19 64.5 137 10 17.8003020017 17 24 23.7 16 83 35 64.3 132 10 15.6003020018 18 24.7 23.7 17 83 35 64.1 170 10 16.801

03020019 19 26.2 25 18 83 35 66.7 186 10 15.2003020208 20.8-13/16 1) 27.7 26 20 83 22 66.2 194 10 19.8003020021 21 28.7 26.5 20 83 35 66.2 231 10 17.0003020022 22 29.7 27.5 21 83 35 65.5 200 10 17.301

03020024 24 32 30 21 83 35 66.1 280 5 17.7003020026 26 34.4 32.5 23 83 35 65.3 334 5 22.3003020027 27 2) 36.2 34 27 83 20 60 294 5 20.9003020030 30 2) 39.7 37.5 30.2 83 35 65 341 5 21.201

03020032 32 42.4 40 29 83 35 63.9 461 5 21.80‘

1) with rubber insert for spark plugs2) for diesel injector (Audi, Daihatsu, Ford, Mazda, Mercedes, Mitsubishi,

Nissan, Opel, Peugeot, Toyota, VW, Volvo)‘

f Sockets51a‘


03420024 3/8 14.3 22 8.3 83 19 67 93 5 19.1003420028 7/16 16.3 22 9.9 83 19 67 102 5 19.1003420032 1/2 18.3 22 11.5 83 35 67 122 5 17.3003420034 9/16 20.3 22.7 13.1 83 35 65.2 131 5 17.301

03420036 5/8 22.4 23.7 15 83 35 64.6 145 5 18.7003420038 11/16 24.2 23.7 16.5 83 35 64.2 158 5 20.1003420040 3/4 26.2 25 18 83 35 66.7 188 5 19.7003420042 13/16 27.7 26 19.5 83 35 66.3 170 5 22.001

03420044 7/8 29.7 27.5 21 83 35 65.9 200 5 22.4003420046 15/16 32 30 22.6 83 35 65.7 281 5 24.5003420048 1 33.7 32 24.2 83 35 65 260 5 24.8003420050 1 1/16 36.2 34 25.8 83 35 64.5 359 5 27.901

03420052 1 1/8 38.1 36 27.4 83 35 64 300 5 29.4003420054 1 3/16 39 37 28 83 35 63.9 377 5 26.8003420056 1 1/4 40 38 30.5 83 35 63.1 433 5 28.9003420058 1 5/16 41.8 40 32.1 83 35 62.7 479 5 28.501

03420060 1 3/8 46 44 33.7 83 35 62.2 506 5 30.2003420062 1 7/16 49.4 47 34 83 35 62.1 635 5 30.5003420064 1 1/2 51 49 35 83 35 61.8 675 5 31.70‘

119

1/2''12.5

DIN3120

ISO1174-1

3

Set: Sockets51/8

P Qlong.Content:13; 17; 19; 22; 24; 27; 30; 32 mm

‘

RCode g S €‘

96030202 2780 1 167.70‘

in sturdy sheet steel box‘

e Sockets51S

P Qextra deep, DIN 3124/ISO 2725-1, E DIN EN 3710,E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


03240017 17 24 23.7 16 83 35 64.3 157 10 19.0003240019 19 26.2 25 18 83 35 66.7 190 10 19.0003240208 20.8-13/16 1) 27.7 26 20 83 22 66.2 196 10 21.2003240022 22 29.7 27.5 21 83 35 65.9 246 10 23.00‘

1) with rubber insert for spark plugs and for tightening and untighteningwheel nuts on Japanese cars

‘

Rubber insert5100for size 20.8 mm (No 51; 51S; 46).

‘

RCode g S €‘

09010001 5 5 1.15‘

e UNIFLEX sockets53


‘


03040010 10 14.7 25 9 70 12 20 136 1 32.5003040013 13 18.4 25 12 70 12 20 140 1 34.5003040016 16 22.4 25 15 69 13 17 141 1 34.2003040017 17 23.5 25 16 70 13 18 141 1 36.101

03040018 18 25 25 17 70 12 18 145 1 34.2003040019 19 26.3 25 18 70 12 17.5 148 1 34.00‘

p Sockets50TX


t2

t1

d 3

‘


03270010 E10 9.4 13 22 5.6 38 9.5 22 53 10 8.8003270011 E11 10.1 14 22 6 38 9.5 22 50 10 9.0503270012 E12 11.1 14.9 22 7.2 38 9.5 22 55 10 8.8503270014 E14 12.9 16.7 22 8 38 11 22 56 10 9.151

03270016 E16 14.7 19 22 9.3 38 12.5 22 60 10 9.4003270018 E18 16.6 21 26.5 10.4 38 13.5 22 92 10 9.8503270020 E20 18.4 23.5 26.5 12 38 15 22 98 10 9.8503270024 E24 22.1 27.8 26 14.1 41.2 17.5 23.6 120 10 13.00‘


Qfor external TORX® screws.Content: E10; E12; E14; E16; E18; E20; E24

‘

RCode g S €‘

96032703 623 1 71.90‘



Qfor external TORX® screws.Content: E10; E11; E12; E14; E16; E18; E20;E24

‘

RCode g S €‘

96032704 1155 1 96.85‘



120

1/2''12.5

DIN3120

ISO1174-1

3

TCS 50TX/54TX/17

xö175 x 350 x 40 mm, 17 pieces‘

RCode g €‘

96838763 1382 202.15‘

No 50TX 1/2'' a sizes E10; E11; E12; E14; E16;E18; E20; E24

‘


‘

h Sockets spline-drive50aPSP

QMS-33787, HPQ high performance steel, gunmetal finish.

‘


03012024 12 3/8 15.5 22 8.6 38 9.5 22 55 5 21.1003012028 14 7/16 18 23.7 10.4 38 11 22 65 5 20.2003012034 18 9/16 22 23.7 13.5 38 12 20 71 5 24.80‘

h Socket spline-drive50aPLSP

Qextra deep bolt clearance, MS-33787, HPQ high performance steel,gunmetal finish.

‘


03013028 14 7/16 18 23.7 10.4 50 11 34 83 5 20.20‘

h Socket51aP

Qextra deep bolt clearance, HPQ high performance steel, gunmetal finish.For the brakes on A320/A321.

‘


03421041 25/32 28 23 17.9 80 21 36 182 1 77.50‘

i INHEX sockets54for hexagon socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

‘


03050004 4 60 22 22.7 68 5 8.4003050005 5 60 22 22.7 68 5 8.4003050006 6 60 22 22.7 71 5 8.4003050007 7 60 22 22.7 75 5 8.401

03050008 8 60 22 22.7 79 5 9.3003050010 10 60 22 22.7 97 5 9.3003050012 12 60 20 23.7 122 5 10.9003050014 14 60 20 23.7 135 5 11.401

03050017 17 60 20 27.5 186 5 13.2003050019 19 60 20 31 242 5 19.90‘



03450014 7/32 60 22 22.7 70 5 8.5503450016 1/4 60 22 22.7 75 5 8.5503450020 5/16 60 22 22.7 81 5 9.3003450024 3/8 60 22 22.7 97 5 9.301

03450028 7/16 60 22 22.7 103 5 10.8003450032 1/2 60 20 23.7 125 5 10.4003450034 9/16 60 20 23.7 137 5 11.9003450036 5/8 60 20 27.5 169 5 12.801

03450040 3/4 60 20 31 244 2 20.30‘

INHEX socket set No 5454/10sizes 4; 5; 6; 7; 8; 10; 12; 14; 17;19 mm

‘

RCode g €‘

96030508 1655 126.50‘

in sturdy sheet steel case‘

ES 54/54KK

175 x 350 x 38 mm, 14 pieces‘

RCode g €‘

96838114 1630 161.25‘

No 54 1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14;17; 19 mm

‘

No 54KK 1/2'' a sizes 5; 6; 8; 10 mm‘

83812046 Empty tray 108 8.15‘

121

1/2''12.5

DIN3120

ISO1174-1

3

TCS 54/54X/16

xö175 x 350 x 35 mm, 16 pieces‘

RCode g €‘

96838762 1665 191.80‘

No 54 1/2'' a sizes 4; 5; 6; 7; 8; 10; 12; 14;17 mm

‘


‘

i INHEX socketsfor hexagon socket head screws, extra long, DIN 7422,Chrome Alloy Steel, chrome plated.

‘


03151205 2054/5 5 120 82 22.7 78 5 9.0503151206 2054/6 6 120 82 22.7 84 5 9.0503151207 2054/7 7 120 82 22.7 96 5 9.7003151208 1054/8K 8 120 82 22.7 104 5 10.101

03151410 1054/10 10 140 102 22.7 150 5 10.8003151412 1054/12 1) 12 140 100 23.7 197 5 12.6003151414 2054/14 14 140 100 23.7 231 5 13.30‘

1) For fitting radiators‘

i INHEX socketsfor hexagon socket head screws, special lengths, DIN 7422,Chrome Alloy Steel, chrome plated.

‘


03151805 1054/5 5 180 20 22 118 5 15.7003150706 1054/6 6 70 32 22.7 72 5 9.0503151006 3054/6 1) 6 100 62 22.7 80 5 15.6003152206 1054/6L 6 220 182 22.7 108 5 18.601

03151007 1054/7 7 100 62 22.7 87 5 15.6003150808 3054/8 8 80 42 22.7 88 5 13.6003151408 1054/8 8 140 102 22.7 114 5 16.6003150713 1054/13 13 70 25 24 130 5 23.60‘

1) for intake manifolds on 5-cylinder diesel engines on VW/Audi and T4 vans‘

ES 1054/2054

175 x 175 x 30 mm, 6 pieces‘

RCode g €‘

96838164 900 69.00‘

No 1054 1/2'' a sizes 8; 10; 12 mmNo 2054 1/2'' a sizes 5; 6; 14 mm

‘

83812081 Empty tray 55 4.10‘

j INHEX sockets54ICfor hexagon socket head screws with guide pin, Chrome Alloy Steel,chrome plated.

‘


03070005 5 60 22 22.7 70 5 9.9003070006 6 60 22 22.7 71 5 9.9003070008 8 60 22 22.7 70 5 11.1003070010 10 60 22 22.7 95 5 11.601

03070012 12 60 20 23.7 120 5 13.4003070014 14 60 20 23.7 131 5 13.80‘

i INHEX sockets54KKwith ball point hexagon, for hexagon socket head screws,swivel angle up to 25° each side, Chrome Alloy Steel, chrome plated.

‘


03280005 5 100 62 22.7 75 5 10.7003280006 6 100 62 22.7 80 5 10.7003280007 7 1) 100 62 22.7 84 5 12.4003280008 8 100 62 22.7 95 5 11.901

03280010 10 100 62 22.7 120 5 12.20‘

1) Application: BMW brakes‘

ES 54KK/5

175 x 175 x 30 mm, 5 pieces‘

RCode g €‘

96838165 505 61.90‘

No 54KK 1/2'' a sizes 5; 6; 7; 8; 10 mm‘

83812051 Empty tray 55 4.00‘


122

1/2''12.5

DIN3120

ISO1174-1

3

i INHEX sockets1054KKwith ball point hexagon, for hexagon socket head screws,swivel angle up to 25° each side, special lengths, Chrome Alloy Steel, chrome plated.

‘


03310005 5 238 200 22.7 145 5 18.4003310008 8 238 200 22.7 154 5 20.70‘

q Screwdriver sockets54CVfor spline socket head screws (Ribe CV®), Chrome Alloy Steel, chrome plated.

‘


03090005 M5 60 22 22.7 69 5 10.2003090006 M6 60 22 22.7 71 5 9.9003090007 M7 60 22 22.7 78 5 12.6003090008 M8 60 22 22.7 78 5 9.901

03090009 M9 60 22 22.7 92 5 13.8003090010 M10 60 22 22.7 95 5 11.1003090012 M12 60 20 23.7 119 5 11.6003090013 M13 60 20 23.7 123 5 16.301

03090014 M14 60 20 23.7 126 5 13.6003090016 M16 63 23 27.5 163 5 14.80‘

Application:Size M7, for brakes, cylinder head screws, bodywork and motor jobs incl. valve covers and spark plug covers on Fiat vehiclesSize M8, bodywork and motor jobs incl. valve covers and spark plugcovers on Fiat vehiclesSize M9, brakes, cylinder head screws (1.2 l; 8V/16V) on Fiat vehiclesSize M10, for cylinder head screws (1.2 l; 8V/16V) on Fiat vehiclesSize M12, for cylinder head screws on Fiat 2.0 l enginesSize M13, for brakes, cylinder head screws on Fiat vehicles, cylinder headscrews on Alfa vehicles, e.g. 1.6 l; 16V enginesSize M14, M16, for cylinder head screws on Alfa vehicles, e.g. 1.6 l; 16Vengines‘

q Set: Screwdriver sockets54CV/9for spline socket head screws (Ribe CV®), 9 pieces,Content: M5; M6; M7; M8; M9; M10; M12;M13; M14

‘

RCode g S €‘

96030901 1420 1 127.90‘


m Screwdriver sockets54Xfor trisquare socket head screws (XZN®), DIN 2324,Chrome Alloy Steel, chrome plated.

‘


03060005 M5 60 22 22.7 67 5 10.4003060006 M6 60 22 22.7 74 5 10.4003060008 M8 60 22 22.7 79 5 10.4003060010 M10 60 22 22.7 94 5 12.001

03060012 M12 60 20 23.7 120 5 12.7003060014 M14 60 20 23.7 128 5 13.9003060016 M16 60 20 27.5 174 5 15.20‘

m Screwdriver sockets3054Xfor trisquare socket head screws (XZN®), DIN 2324,extra long, Chrome Alloy Steel, chrome plated.

‘


03261408 M8 140 102 22.7 109 5 11.1003261410 M10 140 102 22.7 142 5 15.5003261412 M12 140 102 22.7 160 5 14.0003261414 M14 140 100 23.7 225 1 17.30‘

Application: sizes M10 and M12 for cylinder head screws on VW/Audi,Opel, Mercedes-Benz, size M14 for cylinder head screws on VM dieselengines, Chrysler‘

m Set: Screwdriver sockets3054X/54X/8for trisquare socket head screws(XZN®), 8 pieces,Content: 3054X: M8, M10, M1254X: M6, M8, M10, M12, M14

‘

RCode g S €‘

96032606 1460 1 120.40‘


m Screwdriver socketsfor trisquare socket head screws (XZN®), special lengths,DIN 2324, Chrome Alloy Steel,chrome plated.‘

L1 L2 d RCode No size mm mm mm g S €‘

03160808 1054x M8 80 42 22.7 86 5 14.4003161208 2054x M8 120 82 22.7 104 5 15.7003161110 2054x M10 110 72 22.7 130 5 15.0003161112 2054x M12 110 70 23.7 168 5 16.80‘

Application: No 1054x, size M8, for jointed shafts on VW/Audi‘

123

1/2''12.5

DIN3120

ISO1174-1

3


‘


03100020 T20 3.8 55 17 22.7 71 5 10.6003100025 T25 4.4 55 17 22.7 71 5 10.6003100027 T27 5 55 17 22.7 72 5 10.6003100030 T30 5.5 55 17 22.7 72 5 10.601

03100040 T40 6.6 55 17 22.7 72 5 11.3003100045 T45 7.8 55 17 22.7 74 5 11.3003100050 T50 8.8 55 17 22.7 86 5 12.2003100055 T55 11.2 58 18 23.7 112 5 13.901

03100060 T60 13.2 58 18 23.7 113 5 14.5003100070 T70 15.5 60 20 27.5 155 1 19.40‘

Application: size T55 for the cylinder head screws on the Opel Omega V6‘

n Set: Screwdriver sockets54TX/9for inside TORX® screws, 9 pieces,Content: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

‘

RCode g S €‘

96031004 820 1 108.60‘

packed in carton‘

n Socket set TORX®54TX/10for inside TORX® screws, 10 pieces,Content: sizes T20; T25; T27; T30; T40 (2x);T45; T50; T55; T60

‘

RCode g €‘

96031005 1300 135.80‘


ES 54X/54TX

175 x 350 x 38 mm, 16 pieces‘

RCode g €‘

96838115 1600 198.75‘


‘


‘

83812045 Empty tray 111 8.15‘

n Screwdriver socketsfor inside TORX® screws, extra long, Chrome Alloy Steel, chrome plated.

‘

C L1 L2 d RCode No size mm mm mm mm g S €‘

03131230 1054TX T30 5.5 120 82 22.7 99 5 11.9003131440 2054TX T40 6.6 140 102 22.7 110 5 12.3003131445 2054TX T45 7.8 140 102 22.7 111 5 12.3003131450 1054TX T50 8.8 140 102 22.7 143 5 13.601

03131455 1054TX T55 11.2 140 102 22.7 159 5 13.7003131460 1054TX T60 13.2 140 100 23.7 221 5 16.90‘

Application: size T55 for the cylinder head screws on various Ford models,e.g. Mondeo 16V‘

n Screwdriver sockets1054TXfor inside TORX® screws, extra long, Chrome Alloy Steel, chrome plated.

‘


03131240 T40 6.6 120 82 22.7 100 5 19.0003131245 T45 7.8 120 82 22.7 100 5 19.1003131070 T70 15.5 107 67 23.7 201 5 26.40‘

ES 1054/2054TX/6

175 x 175 x 30 mm, 6 pieces‘

RCode g €‘

96838163 950 84.80‘

No 1054TX 1/2'' a sizes T30; T50; T55; T60No 2054TX 1/2'' a sizes T40; T45

‘

83812081 Empty tray 55 4.10‘


124

1/2''12.5

DIN3120

ISO1174-1

3

n Set: Screwdriver sockets1054TX/4Pcfor inside TORX® screws,in plastic wallet, 4 pieces,Content:T40; T45; T50; T55

‘

RCode g S €‘

96031301 527 1 71.60‘

n Screwdriver sockets1054KKTX*for inside TORX® screws, with ball point, swivel angle up to 20° each side, extra long, Chrome Alloy Steel, chrome plated.

‘


03200030 T30 5.5 120 82 22.7 99 5 17.0003200040 T40 6.6 140 102 22.7 105 5 17.3003200045 T45 7.8 140 102 22.7 105 5 17.7003200050 T50 8.8 140 102 22.7 143 5 18.60‘


o Screwdriver sockets54TXBfor inside TORX® screws, tamper proof, with hollow point,Chrome Alloy Steel, chrome plated (TORX® TAMPER RESISTANT).

‘


03110020 T20 3.8 55 17 22.7 70 5 12.4003110025 T25 4.4 55 17 22.7 70 5 12.2003110027 T27 5 55 17 22.7 71 5 12.2003110030 T30 5.5 55 17 22.7 71 5 12.201

03110040 T40 6.6 55 17 22.7 71 5 12.6003110045 T45 7.8 55 17 22.7 73 5 12.6003110050 T50 8.8 55 17 22.7 86 5 13.5003110055 T55 11.2 58 18 23.7 111 5 14.501

03110060 T60 13.2 58 18 23.7 113 5 17.00‘

Application: size T50 for the spare wheel retaining plate on the bumper ofthe Opel Frontera Sport‘

o Set: Screwdriver sockets54TXB/9for inside TORX® screws, tamper proof, with hollow point(TORX® TAMPER RESISTANT).9 piecesContent: T20; T25; T27; T30; T40; T45; T50; T55; T60

‘

RCode g S €‘

96031007 811 1 122.20‘

in carton packing with transparent cover‘

o Set: Screwdriver sockets54TXB/10for inside TORX® screws,tamper proof, with hollow point(TORX® TAMPER RESISTANT).10 piecesContent: T20; T25; T27; T30; 2 x T40; T45;T50; T55; T60

‘

RCode g S €‘

96031008 1288 1 150.70‘


Clip strips50CLfor socket retention, with 9 or 11 retaining clips. Supplied without sockets.

‘


80500001 1 200 54 5 5.4080500002 2 300 73 5 5.40‘

125

1/2''12.5

DIN3120

ISO1174-1

3



‘


13111010 265.5 41 21 610 1 57.00‘


Üüreversible, 36 teeth,with QuickRelease safety lock and 2-component handle, DIN 3122/ISO 3315.

‘


13110020 265,5 41 21 599 1 61.00‘


Üüreversible, 36 teeth, withQuickRelease safety lock and steel handle, DIN 3122/ISO 3315.

‘


13110030 265,5 41 21 680 1 64.50‘

Ratchet, fine tooth515reversible, 60 teeth, with 2-component handle, for use in confined spaces,re-engages after movement of 6°, DIN 3122/ISO 3315.

‘


13231011 265 40 26,2 502 1 46.10‘

Flexible joint ratchet517reversible, 60 teeth,handle may be raised or lowered byapprox. 90°. Lockable in following positions: straight, 30° up, 60° up, 30° down. Unlocked by depressing button in handle, registered design.

‘


13260001 415 43 26 798 1 78.00‘


‘


13140000 67,5 40 316 1 123.00‘

Ratchet532long handle, reversible,36 teeth, with 2-component handle.‘


13121010 380 41 21 821 1 78.50‘

Spare parts set for ratchets No 512, 512SG, 532, 538

5120 +7210/15

Content:1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.

‘

RCode g S €‘

19040000 127 1 25.80‘

for ratchets from 1990‘

Spare parts set for ratchets No 512, 512SG-QR

5120QR

ÜüContent:1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.

‘

RCode g S €‘

19040020 127 1 28.60‘

Ratchet512G

Ureversible, 36 teeth, with 2-component handle, DIN 3122/ISO 3315. Encapsulated housing minimises the ingress of dirt.

‘


13111110 265,5 41 21 610 1 63.50‘

532G Ratchet

Ulong handle, reversible,36 teeth, with 2-component handle.Encapsulated housing minimises the ingress of dirt.

‘


13121110 380 41 21 821 1 84.50‘


126

1/2''12.5

DIN3120

ISO1174-1

3


7350/20

Content:1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

‘

RCode g S €‘

59251020 146 1 28.70‘


Speeder brace501working radius 105 mm,DIN 3122/ISO 3315.

‘


13100010 456 615 5 37.30‘

Speeder brace501Bwith steel handle, for greater axial power transmission,detachable palm head, working radius 105 mm, DIN 3122/ISO 3315.‘


13100002 456 886 1 88.00‘


‘


13061012 15 397 674 1 43.6013061013 18 469 770 1 64.50‘

Spare parts set for No 5045040Content:1 Universal Joint1 Screw1 Spring Washer

‘

RCode g S €‘

96190800 75 1 19.10‘


‘


13070000 300 436 5 16.60‘


‘


13071000 300 470 1 19.10‘


‘


13010001 2 52 23 88 5 9.0013010004 3 75 23.2 120 5 9.6013010002 5 130 23.2 191 5 9.9013010003 10 255 23.2 341 5 13.20‘

Extensions with wobble-drive509Wswivel angle 15° each side, maximum torque 200 N m.

‘


13010005 2 52 23 80 5 11.1013010006 3 75 23.2 120 5 11.9013010007 5 130 23.2 191 5 13.7013010008 10 255 23.2 341 5 16.90‘



‘


13011001 2 52 23 90 1 10.4013011004 3 75 23 123 1 11.0013011002 5 130 23 187 1 11.5013011003 10 255 23 341 1 15.00‘


127

1/2''12.5

DIN3120

ISO1174-1

3


‘


13210001 120 23.2 186 1 21.90‘


‘


13020000 71 25 146 5 23.90‘



‘


13021000 80 25 157 1 27.50‘

Adaptor513

Q1/2'' socket x 3/8'' plug (12.5 x 10),maximum torque 202 N m, DIN 3123/ISO 3316, HPQ high performance steel.

‘


13030002 35 22.7 55 5 9.30‘

Adaptor514

Q1/2'' socket x 3/4'' plug (12.5 x 20),DIN 3123/ISO 3316, HPQ high performance steel.

‘


13030005 44 25 118 5 11.70‘

Adaptor7789-1

Q1/2'' socket x 1'' plug(12.5 x 25 mm),HPQ high performance steel.

‘


58522089 35 36.5 175 1 23.00‘



‘

RCode g S €‘

96121002 120 1 53.80‘

Adaptor514M1/2'' socket x 3/4'' plug(12.5 x 20 mm).

‘


13030010 22 38 50 1 22.10‘

Bit holder543c 5/16'' inside hexagon, DIN 3126/ISO 1173 D 8. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed just aseasily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).‘


13180010 38 22 65 5 20.50‘


sizes 10; 13; 16; 17; 18; 19; 21; 22; 24 mm


No 509/10 (255 mm)

‘

RCode g €‘

96030343 2900 177.90‘


128

1/2''12.5

DIN3120

ISO1174-1

3

Socket set 1/2'' u50/12/3in sturdy sheet steel case,15 pieces Content: 12 sockets with bi-hexagon No 50:

sizes 10; 13; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm


No 509/10 (255 mm)

‘

RCode g €‘

96030435 3750 209.80‘


sizes 10; 13; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm


No 509/10 (255 mm)

‘

RCode g €‘

96030436 3715 208.00‘

Socket set 1/2'' u54/8/4in sturdy sheet steel case,12 piecesContent:8 INHEX sockets No 54:

sizes 4; 5; 6; 8; 10; 12; 14; 17 mm1 ratchet No 5122 extensions No 509/5 (130 mm),

No 509/10 (255 mm)1 T-handle No 506

‘

RCode g €‘

96030501 3833 215.60‘


sizes 10; 11; 12; 13; 14; 15; 16; 17;18; 19; 21; 22; 24; 27; 30 mm

1 socket, long, with rubber insertNo 51: sizes 16 mm - 5/8''


‘

RCode g €‘

96030406 4765 278.65‘


sizes 10; 11; 12; 13; 14; 15; 16; 17;18; 19; 21; 22; 24; 27; 30; 32 mm


No 509/5 (130 mm), No 509/10 (255 mm)1 T-handle No 5061 universal joint No 510

‘

RCode g €‘

96030447 4957 283.05‘


sizes 10; 11; 12; 13; 14; 15; 16; 17;18; 19; 21; 22; 24; 27; 30; 32 mm


No 509/5 (130 mm), No 509/10 (255 mm)1 T-handle No 5061 universal joint No 510

‘

RCode g €‘

96030448 4940 280.85‘


Üüin sturdy ABS plastic case,22 piecesContent:16 sockets with hexagon No 52:

sizes 10; 11; 12; 13; 14; 15; 16; 17;18; 19; 21; 22; 24; 27; 30; 32 mm

1 ratchet No 512QR3 extensions No 509QR/3 (75 mm), No 509QR/5 (130 mm),

No 509QR/10 (255 mm)1 T-handle No 506QR1 universal joint No 510QR

‘

RCode g €‘

96030480 4243 293.85‘

129

1/2''12.5

DIN3120

ISO1174-1

3


sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 23; 24;26; 27; 28; 30; 32 mm

1 ratchet No 5123 extensions No 509/3 (75 mm), No 509/5 (130 mm),


‘

RCode g €‘

96030407 5540 336.40‘


sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 23; 24;26; 27; 28; 30; 32 mm



‘

RCode g €‘

96030409 5600 333.45‘

Socket set 1/2'' u50ma/39/6Nin sturdy sheet steel case,45 piecesContent:39 sockets with bi-hexagon

No 50: sizes 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26;27; 28; 30; 32; 34 mm

No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16;1 1/8; 1 3/16; 1 1/4''



‘

RCode g €‘

96030140 8560 511.45‘

Socket set 1/4''; 1/2'' u40/52/27/11in sturdy sheet steel case,38 piecesContent:9 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11 mm


3 INHEX sockets No 44: sizes 3; 4; 5 mm5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm2 ratchets No 415, No 5124 extensions No 405/2 (54 mm), No 509/5 (130 mm),

No 405/6 (150 mm), No 509/10 (255 mm)2 universal joints No 407, No 5101 drive handle No 4002 T-handles No 404, No 506

‘

RCode g €‘

96010160 5275 439.20‘

Socket set 1/2'' u50/54/25/6in sturdy sheet steel case,31 piecesContent:17 sockets with bi-hexagon No 50:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 21; 22; 24; 27; 30;32 mm

8 INHEX sockets No 54:sizes 4; 5; 6; 7; 8; 10; 12; 14 mm



‘

RCode g €‘

96030439 6090 382.90‘

Socket set 1/2'' u52/54/25/6in sturdy sheet steel case,31 piecesContent:17 sockets with hexagon No 52:

sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 21; 22; 24; 27; 30;32 mm

8 INHEX sockets No 54:sizes 4; 5; 6; 7; 8; 10; 12; 14 mm

1 ratchet No 512 3 extensions No 509/3 (75 mm), No 509/5 (130 mm),


‘

RCode g €‘

96030239 6106 380.30‘


130

1/2''12.5

DIN3120

ISO1174-1

3


sizes 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 23; 24; 25;26; 27; 28; 30; 32; 34 mm

7 sockets, long, No 51: sizes 13; 17; 18; 19; 22; 24;27 mm

2 sockets, long, with rubber insert No 51: sizes 16 mm - 5/8'', 20.8 mm - 13/16''

6 UNIFLEX sockets with hexagon No 53: sizes 10; 13; 16; 17; 18; 19 mm5 INHEX sockets No 54: sizes 4; 5; 6; 8; 10 mm1 ratchet No 5123 extensions No 509/3 (75 mm), No 509/5 (130 mm),

No 509/10 (255 mm)1 flexible handle No 504/151 T-handle No 5061 universal joint No 510

‘

RCode g €‘

96030136 10710 825.95‘

Socket set 1/2'' u87Nin sturdy sheet steel case,47 piecesContent:19 sockets with bi-hexagon No 50:

sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30;32; 34 mm

2 sockets, long, with rubber insert,No 51: sizes 16 mm - 5/8'';20.8 mm - 13/16''


13 combination spanners No 13:sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm



‘

RCode g €‘

96030101 8265 589.40‘

Socket set 1/2'' u876Nin sturdy sheet steel case,47 piecesContent:19 sockets with hexagon No 52:

sizes 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30;32; 34 mm



13 combination spanners No 13:sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm



‘

RCode g €‘

96030301 8240 583.85‘

Socket set TORX® 1/2'' u50TX/16/5in sturdy sheet steel case,21 pieces Content: 7 sockets for external TORX® screws

No 50TX: sizes E10; E12; E14;E16; E18; E20; E24

9 screwdriver sockets for internalTORX® screws No 54TX: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

1 ratchet No 512 3 extensions No 509/2 (52 mm), No 509/5 (130 mm),


‘

RCode g €‘

96032702 4315 323.20‘

Socket set TORX® 1/2'' u876TXin sturdy sheet steel case,39 pieces Content:12 sockets with hexagon No 52:

sizes 8; 10; 13; 16; 17; 18; 19; 21;22; 24; 27; 30 mm

6 INHEX sockets No 54: sizes 5; 6; 8; 10; 12; 14 mm

7 sockets for external TORX® screws No 50TX: sizes E10; E12; E14; E16; E18; E20; E24

9 screwdriver sockets for internal TORX® screws No 54TX: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60


‘

RCode g €‘

98810909 7203 493.85‘

131

1/2''12.5

DIN3120

ISO1174-1

3

Socket set TORX® 1/4; 3/8; 1/2'' u89TXin sturdy sheet steel case,35 piecesContent:3 sockets for external TORX®

screws No 40TX: sizes E4; E5; E6 2 screwdriver sockets for internal

TORX® screws No 44KTX:sizes T8; T9

4 sockets for external TORX® screws No 45TX: sizes E7; E8; E10; E125 screwdriver sockets for internal TORX® screws No 49TX:


sizes E11; E14; E16; E18; E20; E246 screwdriver sockets for internal TORX® screws No 54TX:


1445: T30; 1446: T401 bit-holder No 4421 TORX® controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;

T25; T27; T30; T40; T45; T47; T50; T55; T60

‘

RCode g €‘

98810908 2765 339.00‘

Socket set TORX® 1/4; 1/2'' u86TXin sturdy sheet steel case,63 piecesContent:9 sockets with hexagon No 40:

sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11 mm


5 sockets for external TORX® screws No 40TX: sizes E4; E5; E6; E7; E87 sockets for external TORX® screws No 50TX:

sizes E10; E12; E14; E16; E18; E20; E243 INHEX sockets No 44: sizes 3; 4; 5 mm5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm6 screwdriver sockets for internal TORX® screws No 44KTX:

sizes T8; T9; T10; T15; T20; T257 screwdriver sockets for internal TORX® screws No 54TX:

sizes T27; T30; T40; T45; T50; T55; T602 ratchets No 415, No 5124 extensions No 405/2 (54 mm), No 509/5 (130 mm),

No 405/6 (150 mm), No 509/10 (255 mm)2 universal joints No 407, No 5101 drive handle No 4002 T-handles No 404, No 506

‘

RCode g €‘

96012702 7045 679.20‘


sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16;3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''



‘

RCode g €‘

96034125 5145 305.95‘

Socket set 1/2'' u50ma/39/6Nin sturdy sheet steel case,45 piecesContent:39 sockets with bi-hexagon

No 50: sizes 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21;22; 23; 24; 25; 26; 27;28; 30; 32; 34 mm

No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16;1 1/8; 1 3/16; 1 1/4''



‘

RCode g €‘

96030140 8560 511.45‘

Socket set 1/2'' u87aNin sturdy sheet steel case,40 piecesContent:15 sockets with bi-hexagon No 50a:

sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4;13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16; 1 1/4''


5 INHEX sockets No 54a:sizes 7/32; 1/4; 5/16; 3/8; 1/2 ''

12 combination spanners No 13a:sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8''



‘

RCode g €‘

96034101 7947 534.05‘


132

1/2''12.5

DIN3120

ISO1174-1

3

ES 1/2''-512/6

175 x 350 x 35 mm, 6 pieces‘

RCode g €‘

96838113 1915 137.75‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

83812029 Empty tray 110 8.15‘

TCS 1/2''-512/6


RCode g €‘

96838175 1845 148.20‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

TCS 1/2''-512/9


RCode g €‘

96830603 2364 187.40‘

No 506 1/2'' D 300 mm‘

No 509QR/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509QR/10 1/2'' D a 255 mm (2x)‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 514 3/4'' D 1/2'' a‘

TCS 50/52/30/6 MF

xö

350 x 350 x 70 mm, 36 pieces‘

RCode g €‘

96830354 4604 399.00‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 30 mm

‘

No 52 1/2'' a sizes 12; 13; 17; 18; 19; 20; 21;22; 24; 27; 30; 32; 34 mm

‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12 mm‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘



With yellow signal cut-outs to show whether all tools are in their places

133

3/4''20

DIN3120

ISO1174-1

3

c Sockets55

P QDIN 3124/ISO 2725-1, ASME B 107.5 M,AS-drive and HPQ high performance steel up to size 38, chrome plated.

‘


05010019 19 28.5 34.7 17 50 16 26 183 5 10.5005010021 21 31 34.7 18 50 16 26 226 5 11.6005010022 22 32 34.7 19 51 17 25.2 199 5 10.5005010023 23* 33.5 34.7 20 51 17 24.9 206 5 12.601

05010024 24 34 34.7 21 51 18.5 24.6 200 5 11.3005010027 27 38.5 38 24 54 20 26.8 263 5 12.9005010030 30 42 38 27 58 21 33.6 313 5 15.7005010032 32 44.5 38 29 58 22 33 326 2 16.901

05010033 33 46 40 30 60 22 34.7 372 2 20.1005010034 34 47 40 31 60 24 34.4 363 2 17.7005010036 36 49.5 40 33 60 24 33.9 386 2 17.1005010038 38 52 40 35 64 30 37.3 429 2 19.901

05010041 41 55.5 40 33 67 30 37.5 498 2 27.0005010046 46 61 40 33 73 34 43.5 605 1 28.8005010050 50 66 40 33 80 34 48.5 769 1 34.0005010055 55 72 45 33 80 36 49.5 954 1 46.901

05010060 60 78 45 33 80 40 50.5 1025 1 59.00‘


d Sockets55a

P QSAE AS 954-E (test loads), ASME B 107.1,AS-drive and HPQ high performance steel up to size 1 1/2'', chrome plated.

‘


05410040 3/4 28.5 34.7 18.6 50 16 26 176 2 13.2005410042 13/16 31 34.7 19.4 51 16.5 25.1 190 2 15.0005410044 7/8 33 34.7 21 51 18 24.5 240 2 13.6005410046 15/16 34 34.7 22.5 51 18.5 24.2 248 2 13.601

05410048 1 37 38 24 52 20 24.8 251 2 14.1005410050 1 1/16 38.5 38 26 54 20 26.2 265 2 15.5005410052 1 1/8 41 38 27.5 57 20 32.5 297 2 18.6005410056 1 1/4 44.5 38 30.5 58 22 32.6 339 2 19.201

05410058 1 5/16 46.5 40 32.1 59 24 33.1 368 2 20.7005410060 1 3/8 48.5 40 33.7 59 24 32.7 375 2 20.7005410062 1 7/16 50 40 35.3 60 27 33.2 395 2 22.5005410064 1 1/2 52 40.5 36.8 64 30 36.8 415 2 21.401

05410066 1 5/8 56 40 33 67 30 37.5 469 1 31.3005410067 1 11/16 58 40 33 70 32 40.5 524 1 31.4005410068 1 3/4 59.5 40 33 70 32 40.5 524 1 31.3005410069 1 13/16 61.5 40 33 73 34 43.5 585 1 33.401

05410070 1 7/8 63.5 40 33 76 34 45 651 1 34.7005410072 2 67 40 33 80 34 48.5 757 1 38.20‘

c Sockets56

P QDIN 3124/ISO 2725-1, ASME B 107.5 M,extra deep, AS-drive and HPQ high performance steel up to size 36,chrome plated.

‘


05020022 22 32 34.7 19 90 40 64.2 374 5 28.1005020024 24 34 34.7 21 90 40 63.6 341 5 26.4005020027 27 38.5 38 24 90 40 62.8 443 5 29.1005020030 30 42 38 27 90 40 65.6 477 5 32.601

05020032 32 44.5 38 29 90 40 65 526 2 34.5005020034 34 47 40 31 90 40 64.4 562 2 36.4005020036 36 49.5 40 33 90 40 63.9 620 2 40.0005020041 41 55.5 40 38 90 40 58.5 714 2 49.10‘


‘


05050014 14 80 25 34.7 272 1 33.9005050017 17 80 25 34.7 311 1 33.9005050019 19 80 25 34.7 346 1 34.8005050022 22 80 25 40 515 1 36.50‘

m Screwdriver sockets59Xfor trisquare socket head screws (XZN®), Chrome Alloy Steel, chrome plated.

‘


05060014 M14 90 35 34.7 281 1 31.4005060016 M16 80 25 34.7 302 1 32.7005060018 M18 100 45 34.7 310 1 36.90‘

Application: Flywheel and oscillation damper on Mercedes-Benzcommercial vehicles‘


134

3/4''20

DIN3120

ISO1174-1

3


‘


05100060 T60 13.2 80 25 34.7 265 1 35.6005100070 T70 15.5 80 25 34.7 285 1 37.9005100080 T80 17.6 80 25 34.7 300 1 39.5005100090 T90 19.9 80 25 34.7 331 1 42.501

05100100 T100 22.1 80 25 40 474 1 44.60‘

Application: size T80 for MAN series M, size T100 for MAN series F‘


Ratchet552

Üüreversible, 36 teeth,with QuickRelease safety lock,without Bar handle No 558.

‘


15110000 165 70 55 1684 1 120.00‘

Spare parts set for ratchet No 5525520Content:1 pinion, 1 pawl, 1 lever, 1 ball, 1 compression spring, 2 screws

‘

RCode g S €‘

19050000 507 1 59.55‘


‘


15140000 105.5 63 1257 1 245.00‘

Flexible head554

Üüwith QuickRelease safety lock,without Bar handle No 558.

‘


15060000 132 40 612 5 45.00‘

Sliding head556without Bar handle No 558.

‘


15070000 61.5 40 318 5 20.30‘

Bar handle558

‘


15170000 510 20 1299 2 24.20‘


‘


15010003 4 95 35 369 5 21.9015010001 8 200 35 696 5 23.6015010002 16 400 35 1389 5 40.50‘


‘


15020000 109 40 566 1 76.50‘

Adaptor568

Q3/4'' socket x 1/2'' plug (20 x 12.5),maximum torque 512 N m,DIN 3123/ISO 3316, HPQ high performance steel.

‘


15030003 55 34.7 203 5 23.10‘

Adaptor569

Q3/4'' inside x 1'' plug (20 x 25),DIN 3123/ISO 3316, HPQ high performance steel.

‘


15030006 61 34.7 295 5 24.20‘

135

3/4''20

DIN3120

ISO1174-1

3


sizes 22; 24; 27; 30; 32; 34; 36;41; 46; 50 mm


No 559/16 (400 mm)1 flexible head No 5541 sliding head for T-handle No 5561 bar handle No 558

‘

RCode g €‘

96050104 13965 538.50‘

Socket set 3/4'' u55/9/6Nin sturdy sheet steel case,15 piecesContent:9 sockets with hexagon No 55:

sizes 32; 34; 36; 38; 41; 46; 50;55; 60 mm



‘

RCode g €‘

96050103 15731 613.90‘


sizes 1 1/16; 1 1/8; 1 1/4; 1 3/8; 1 7/16;1 1/2; 1 5/8; 1 3/4; 1 13/16; 1 7/8''


No 559/16 (400 mm)1 sliding head for T-handle No 5561 bar handle No 558

‘

RCode g €‘

96054101 12620 541.50‘


sizes 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 1/4;1 5/16; 1 3/8; 1 7/16; 1 1/2; 1 5/8; 1 11/16;1 3/4; 1 13/16; 1 7/8; 2''



‘

RCode g €‘

96054103 16750 726.80‘

ES 55/6/4

530 x 350 x 83 mm, 10 pieces‘

RCode g €‘

96838174 7875 383.00‘

No 55 3/4'' a sizes 34; 36; 41; 46; 50; 55 mm‘

No 552 3/4'' D‘

No 556 3/4'' D‘

No 558 510 mm‘

No 559/8 3/4'' D a 200 mm‘

83812089 Empty tray 298 23.40‘

TCS 55/11/6

xö

530 x 350 x 90 mm, 17 pieces‘

RCode g €‘

96830221 10100 556.00‘

No 55 3/4'' a sizes 22; 24; 27; 30; 32; 34; 36;38; 41; 46; 50 mm

‘

No 552 3/4'' D‘

No 556 3/4'' D‘

No 558 510 mm‘

No 559/8 3/4'' D a 200 mmNo 559/16 3/4'' D a 400 mm

‘

No 568 1/2'' D 3/4'' a‘


136

1''25

DIN3120

ISO1174-1

3

d Sockets60

P QDIN 3124/ISO 2725-1, AS-drive and HPQ high performance steel up tosize 36, chrome plated.

‘


06010030 30 42.5 43 27 65 20 33.1 371 2 21.2006010032 32 45 43 29 67 24 34.6 374 2 21.3006010034 34 47 43 31 67 24 34 398 2 24.5006010036 36 49.5 48 33 67 24 33.4 493 2 22.601

06010041 41 55.5 48 36 70 30 37.5 520 1 35.5006010046 46 61 48.5 40 75 32 43.5 622 1 41.6006010050 50 66 48 43 80 34 47.5 707 1 47.8006010055 55 72 48 49 85 36 49.5 920 1 63.001

06010060 60 78 48 53 90 40 56.5 992 1 72.50‘

c Sockets60DIN 3124, Chrome Alloy Steel, chrome plated.

‘


06010065 65 87 60 58 105 40 68.5 1917 1 95.5006010070 70 94 60 63 110 42 72.5 2210 1 121.0006010075 75 101 60 68 115 45 78.5 2525 1 134.0006010080 80 108 60 73 120 48 83.5 2865 1 153.00‘

i INHEX sockets64DIN 7422, Chrome Alloy Steel, chrome plated.

‘


06050014 14 85 25 43 390 1 55.5006050017 17 85 25 43 417 1 55.5006050019 19 85 25 43 445 1 54.5006050022 22 90 25 48 661 1 59.001

06050024 24 90 25 48 719 1 60.0006050027 27 90 25 49 827 1 59.00‘

Drive tools and accessories1'' u, finish: Chrome Alloy Steel, chrome plated.

Ratchet882

Üüreversible, 36 teeth,with QuickRelease safety lock,without Bar handle No 888.

‘


16110000 185 70 60 2000 1 158.00‘

Spare parts set for ratchet No 8828820Content:1 pinion, 1 pawl, 1 lever, 1 ball, 1 compression spring, 2 screws

‘

RCode g S €‘

19070000 539 1 94.55‘

Flexible head884

Üüwith QuickRelease safety lock,without Bar handle No 888.

‘


16060000 195 48 1800 1 110.00‘

Sliding head886without Bar handle No 888.

‘


16070000 80 48 605 1 35.30‘

Bar handle888

‘


16170000 700 28 3320 1 41.10‘

137

1''25

DIN3120

ISO1174-1

3


‘


16010001 8 200 43 965 2 52.0016010002 16 410 43 1780 2 69.50‘

Adaptor866

Q1'' socket x 3/4'' plug (25 x 20),maximum torque 1412 N m, DIN 3123/ISO 3316, HPQ high performance steel.

‘


16030005 70 43 332 2 31.70‘

Socket set 1'' u60/6/6/882in sturdy sheet steel case,12 piecesContent:6 sockets with bi-hexagon No 60:

sizes 36; 41; 46; 50; 55; 60 mm1 ratchet No 8822 extensions No 859/8 (200 mm), No 859/16 (410 mm)1 flexible head No 8841 sliding head for T-handle No 8861 bar handle No 888

‘

RCode g €‘

96060101 27800 834.40‘

Socket set 1'' u60/8/6/882in sturdy sheet steel case,14 piecesContent:4 sockets with bi-hexagon No 60:

sizes 46; 50; 55; 60 mm4 sockets with hexagon No 60:

sizes 65; 70; 75; 80 mm1 ratchet No 8822 extensions No 859/8 (200 mm), No 859/16 (410 mm)1 flexible head No 8841 sliding head for T-handle No 8861 bar handle No 888

‘

RCode g €‘

96060103 30000 1306.30‘

Empty boxes and trays

3

138

'Set Box Box TrayNo No mm Code € Code €

40/9N 220x130x42 81250019 14.60 83011012 3.0040/9/4, 40D/9/4

40/9N 220x130x42 81250019 14.60 83011080 3.0040/13/6

40/9K 220x110x40 81251009 13.50 83011182 3.0040/13/6QR

40/9N 220x130x42 81250019 14.60 83011081 3.0040/44/17/5

40/9K 220x110x40 81251009 13.50 83021084 3.0040/44/17/5QR

45/1N 315x134x46 81260011 16.30 83011016 3.8040/23/7,40D/23/7

40/9N 220x130x42 81250019 14.60 83011014 3.0040/23/6N,40D/23/6

40/9K 220x110x40 81251009 13.50 83011082 3.7040/24/6

40/9K 220x110x40 81251009 13.50 83011083 3.7040/24/6QR

40/7N 405x178x45 81250014 23.80 83011035 5.5040ma/25/8

40/7N 405x178x45 81250014 23.80 83011011 5.5040/45/36/12

50/4N 446x205x54 81270034 25.00 83011004 11.4040/52/27/11

40/9N 220x130x42 81250019 14.60 83011007 3.1040TX/44KTX/15/6

45/1N 315x134x46 81260011 16.30 83021017 3.8088TX

50/3N 405x178x54 81270013 26.10 83091013 5.5089TX

50/6N 470x234x74 81270019 42.40 83011002 11.4086TX

40/9N 220x130x42 81250019 14.60 83011013 3.0040a/9/4,40aD/9/4

40/9N 220x130x42 81250019 14.60 83011116 8.9540aD/12/7QR

40/7N 405x178x45 81250014 23.80 83011112 5.9540aD/30/7QR

40/9K 220x110x40 81251009 13.50 83011107 4.0540aD/8/1H

40/9N 220x130x42 81250019 14.60 83180001 3.904008/27/1

45/1N 315x134x46 81260011 16.30 83021013 3.8045/11/4,456/11/4

45/1N 315x134x46 81260011 16.30 83021080 3.8545/14/5i,456/14/5i

45/1K 315x115x45 81261001 14.80 83021081 3.8545/14/5iQR

45/1N 315x134x46 81260011 16.30 83021045 3.8045/13/5N,456/13/5

40/7N 405x178x45 81250014 23.80 83021027 5.5045ma/28/5

40/7N 405x178x45 81250014 23.80 83021021 5.5045/49/19/5,456/49/19/5

50/6N 470x234x74 81270019 42.40 83020118 11.2089N

50/5 530x265x50 81270005 47.00 83020202 12.1045/41/9

– – – 83060015 2.2545TX/7

– – – 83060014 3.0549TX/8

40/7N 405x178x45 81250014 23.80 83021019 3.8545TX/49TX/15/5

40/7N 405x178x45 81250014 23.80 83021009 5.6045/49/32/5TX

45/1N 315x134x46 81260011 16.30 83021006 3.8045a/12/5

50/4N 446x205x54 81270034 25.00 83021012 10.7045a/14/8QR

50/4N 446x205x54 81270034 25.00 83021112 10.7045a/22/8QR

50/5 530x265x50 81270005 47.00 83020213 12.1045a/33/13

50/3N 405x178x54 81270013 26.10 83030425 11.2052/9/3

50/3N 405x178x54 81270013 26.10 83030412 11.2050/12/3,52/12/3

50/1N 315x134x54 81270011 19.40 83030402 4.6051/8

40/9N 220x130x42 81250019 14.60 83031403 4.3054/10

3

139

'Set Box Box TrayNo No mm Code € Code €

45/1N 315x134x46 81260011 16.30 83031409 4.2054/12

40/9N 220x130x42 81250019 14.60 83032409 4.3054CV/9

40/9N 220x130x42 81250019 14.60 83032612 5.803054X/54X/8

50/3N 405x178x54 81270013 26.10 83030413 13.5054/8/4

50/4N 446x205x54 81270034 25.00 83030409 11.2052/16/5

50/4N 446x205x54 81270034 25.00 83031480 11.2050/16/6,52/16/6

50/4K 440x185x55 81271004 23.10 83031481 11.2052/16/6QR

50/4N 446x205x54 81270034 25.00 83030407 12.6050/22/6,52/22/6

50/5 530x265x50 81270005 47.00 83031426 12.2050ma/39/6N

50/6N 470x234x74 81270019 42.40 83031417 12.4050/54/25/6,52/54/25/6

50/5 530x265x50 81270005 47.00 83030511 12.1050/43/7

50/6N 470x234x74 81270019 42.40 83090011 22.5087N, 876N

– – – 83060009 3.0050TX/7

40/9N 220x130x42 81250019 14.60 83032411 4.3050TX/8

– – – 83060010 3.0054TX/9

40/9N 220x130x42 81250019 14.60 83031402 4.3054TX/10

– – – 83060010 3.0054TXB/9

40/9N 220x130x42 81250019 14.60 83031402 4.3054TXB/10

50/4N 446x205x54 81270034 25.00 83031413 10.7050TX/16/5

50/6N 470x234x74 81270019 42.40 83091011 12.10876TX

50/4N 446x205x54 81270034 25.00 83030441 11.2050a/17/6

50/6N 470x234x74 81270019 42.40 83090012 22.5087aN

55/7 575x220x86 81290008 54.50 83040002 18.5055/10/6

55/7 575x220x86 81290008 54.50 83040001 18.5055/9/6N

55/6 520x160x86 81290007 47.40 83040003 16.9055a/10/5

55/7 575x220x86 81290008 54.50 83040004 18.5055a/16/6

60/1 785x173x90 81300001 85.50 – –60/6/6/882

60/2 785x200x122 81300002 112.00 – –60/8/6/882

3




4

1

4

Power Tools

STAHLWILLE IMPACT socketsare extraordinarily tough. Their remarkable fitting accuracy,which is due to very tight tolerances, guarantees minimum loss of force as theimpact is transferred from the impact screwdriver to the socket insert and also dramatically improved durability.

STAHLWILLE IMPACT sockets are made from high-gradeChrome Alloy Steel.They are hardened in an oil bath to ensure they are normalised and non-warping,making them extremely accurate tools with very closetolerances.

Power tools

STAHLWILLE IMPACT.Tried-and-tested components for professional use in conjunction with compressed air and electric impact screwdrivers.All the tools in the IMPACT product range havebeen designed for particularly heavy-duty workon a day-to-day basis. Used as additional tools in conjunction with power impact tools they feature extremely good

Joints:Deep groove for O-ring

to improve grip and straight-through central

bore for locking pin. Bevelled edge facilitates

attachment.Recessed keyway

adaptors with spring-loaded pins on the squaredrive, e.g. No 3116, 3216.

load-bearing capacity and very long lifetimes.It is not only the professionals in the car-repairsector who appreciate the excellent precision andreliability of IMPACT tools. The name IMPACT is a by-word in all fields of industry and the tradesfor leading-edge quality made by professionals for professionals. The comprehensive range ofproducts caters for all potential fields of application.

1

3

4

22

1

3 4

2

IMPACT quality is available individually or in setsWhatever else the professional might want in a tool, there is nocompromising on the quality. The extensions, adaptors, jointsand sockets will always fit – perfectly. Combine them as youneed them. Slot them together. Done.

No 50IMP/6/2

142

No 2309Ke.g. 1/2'' � wheel nut socket(sizes 17; 19 and 20.8 mm) withplastic sleeves, specially for sensitive alloy wheels.

143

The bit that fits – alwaysThat is why STAHLWILLE offers such a range of BITS for flat-bladed, Phillips®, POZIDRIV/SUPADRIV®, internal TORX®, internalserration, internal hex drive, TRI-WING®, TORQ-SET® screwsand recessed 5-star screws with a central pin – if required, alsoavailable in sets with corresponding tightening tools e.g. anti-clockwise and clockwise ratcheting bit-holder. High-grade special steel alloys and special hardening processes guaranteeoptimum torquing and long service lifetimes.

Get a grip on it:sturdy bit-holders and ratchets etc. STAHLWILLE BITS are, of course, also suitable for manualuse, e.g. in conjunction with the corresponding bit-holders,ratchets, magazine holders, switchable ratchets and TORSIOMAX torque screwdrivers.

STAHLWILLE range of BITS – uncompromisingly attractive. Reliable screwdriver inserts and adaptors in individual sizes or as sets for power screwdrivers or manual use.

No 1201

Slotted

Internal serration XZN®

Internal hex

POZIDRIV ®

SUPADRIV ®

Phillips®

Internal TORX ®

Internal TORX ®

with hollow point

TRI-WING®

TORQ-SET®

5-star with hollow point

r

m

i

l

k

n

o

s

t

ä

No 4008/27/1

BITS screwdriver inserts from STAHLWILLE guarantee minimum transmission losses.

STAHLWILLE BITS are also suitable for use with heavy-dutypower screwdrivers.

e.g. ratchet No 415SGB with 1/4'' internal hex drive, reversible

e.g. bit holder No 4007 for BITS screwdriver inserts with external 1/4'' hex

Power tools

144

1/2'' DIN3121

ISO1174-2

4

IMPACT sockets and accessory toolsfor power drivers

Thin Walled – yet exceptionally strong.All STAHLWILLE IMPACT sockets made from high quality ChromeVanadium Steel. Heat treated and oil quenched to avoid stresses,distortions and to maintain very close tolerances. Dimensional accuracyensures minimal power transmission losses and drastically increasesdurability.

c IMPACT sockets50IMP1/2'' a-drive, DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel, gunmetal finish.

‘

A d1 d2 L t RCode mm mm mm mm mm g S €‘

23010010 10 16.8 25 38 21.5 89 10 8.9023010011 11 18.1 25 38 21.5 88 10 8.9023010013 13 20.8 25 38 21.5 85 10 8.9023010014 14 22.1 25 38 21.5 86 10 8.901

23010015 15 23.5 30 38 21.5 132 10 9.4023010016 16 24.8 30 38 21 130 10 9.6523010017 17 26.2 30 38 21 132 10 9.6023010018 18 27.5 30 38 20.5 130 10 9.651

23010019 19 28.8 30 40 22.5 133 10 9.2023010021 21 31.3 30 40 21.5 135 10 11.1023010022 22 32.5 30 42 21.5 141 10 11.1023010024 24 35 30 45 25 164 5 10.801

23010027 27 38.8 30 50 25 190 5 13.50‘

IMPACT-Set50IMP/6/28 piecesContent:6 Sockets No 50IMP:

sizes 13; 17; 19; 21; 22; 24 mm1 Extension No 509/5IMP1 Universal Joint No 510IMP

for power drivers

‘

RCode g €‘

96230101 1800 148.45‘

c IMPACT sockets51IMP1/2'' a-drive, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

‘


23020013 13 20.8 25 85 68.5 222 5 21.2023020015 15 23.5 30 85 68 360 5 21.2023020016 16 24.8 30 85 68 338 5 21.2023020017 17 26.2 30 85 68 318 5 20.401

23020018 18 27.5 30 85 68 309 5 21.2023020019 19 28.8 30 85 67.5 292 5 20.4023020021 21 31.3 30 85 66.5 291 5 24.1023020022 22 32.5 30 85 66.5 323 5 24.201

23020024 24 35 30 85 66 335 5 23.5023020027 27 38.8 30 85 65 385 5 28.00‘

c IMPACT sockets23091/2'' a-drive, for power drivers, extra deep, with reduced outside diameter,Chrome Alloy Steel, gunmetal finish.

‘


23090017 17 25.7 30 85 68 242 5 25.9023090019 19 28.2 30 85 67.5 257 5 25.9023090208 20.8 30.7 30 85 66.5 272 5 29.0023090022 22 32 30 85 66.5 311 5 29.00‘

for wheel nuts‘

ES 2309/4

175 x 175 x 40 mm, 4 pieces‘

RCode g €‘

96838162 1145 113.90‘

No 2309 1/2'' a sizes 17; 19; 20.8 mm-13/16'';22 mm

‘

83812080 Empty tray 55 4.10‘

145

1/2'' DIN3121

ISO1174-2

4

c Wheel nut sockets2309K1/2'' a-drive, with plastic sleeve.Sleeve extension protects not onlywheel bolts and nuts but also thewheel and holes.

‘

A L O RCode mm mm mm g S €‘

23091017 17 87 32 242 1 32.7023091019 19 87 32 250 1 34.3023091208 20.8 87 32 265 1 34.00‘

ES 2309K/3

175 x 175 x 30 mm, 3 pieces‘

RCode g €‘

96838260 800 105.10‘

No 2309K 1/2'' a sizes 17; 19; 20.8 mm-13/16''‘

83812080 Empty tray 55 4.10‘

p IMPACT sockets2308TX1/2'' a-drive, external TORX®, for power drivers, Chrome Alloy Steel,gunmetal finish.

‘

C d1 d2 L RCode size mm mm mm mm g S €‘

23080010 E10 9.4 14 25 38 67 10 12.0023080012 E12 11.1 15.9 25 38 73 10 12.3023080014 E14 12.9 17.7 25 38 73 10 12.1023080016 E16 14.7 20 25 38 77 10 12.801

23080018 E18 16.6 22 30 38 115 10 14.2023080020 E20 18.4 24.5 30 38 120 10 15.0023080024 E24 22.1 30 30 41.2 149 10 19.10‘

n IMPACT sockets2307TX1/2'' a-drive, inside TORX®, for power drivers, Chrome Alloy Steel,gunmetal finish.

‘

C d L RCode size mm mm mm g S €‘

23070030 T30 5.5 25 40 57 5 17.0023070040 T40 6.6 25 40 58 5 18.4023070045 T45 7.8 25 40 59 5 18.5023070050 T50 8.8 25 40 57 5 18.601

23070055 T55 11.2 25 40 61 5 26.3023070060 T60 13.2 25 40 66 5 26.30‘

Accessory tools for IMPACT sockets1/2'' a square driveoutside D E 12.5, inside a G 12.5Finish: Chrome Alloy Steel, gunmetal finish

Extensions

‘

L d RCode No mm mm g S €‘

33010001 509/2IMP 52 30 151 5 19.3033010002 509/5IMP 130 30 271 5 23.9033010003 509/10IMP 255 30 452 5 30.00‘

Universal joint510IMP

‘


33020000 68 30 210 5 45.70‘

Adaptors

‘

inside outside L d RCode No a '' D '' mm mm g S €‘

33030002 513IMP 1/2 3/8 37 30 109 5 16.8033030005 514IMP 1/2 3/4 49 30 174 5 19.30‘

Rubber rings‘

RCode No g S €‘

39011940 5091/1IMP 1) 1 10 2.2539012440 5091/2IMP 2) 1 10 2.25‘

1) for Socket sizes 8–14 mm, TORX® size E10–E16, size T30–T602) for Socket sizes 15–27mm, TORX® size E18–E24 and accessories‘

Connecting pins‘

RCode No g S €‘

39022030 5092/1IMP 1) 1 10 0.9039022530 5092/2IMP 2) 2 10 0.90‘

1) for Socket sizes 8–14 mm, TORX® size E10–E16, size T30–T602) for Socket sizes 15–27 mm, TORX® size E18–E24 and accessories‘

Power tools

146

3/4'' DIN3121

ISO1174-2

4

c IMPACT sockets55IMP3/4'' a-drive DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel,gunmetal finish.

‘


25010017 17 29 44 48 23 365 5 22.3025010018 18 30.5 44 48 23 345 5 23.4025010019 19 32 44 48 23 359 5 22.3025010021 21 35 44 50 25 375 5 23.401

25010022 22 36.5 44 50 25 377 5 22.3025010024 24 39.5 44 50 24.5 382 5 23.8025010027 27 43.5 44 51 24.5 387 5 25.3025010028 28 45 44 54 27 417 5 25.301

25010029 29 46 44 54 26.5 425 5 26.4025010030 30 47.4 44 54 26.5 438 2 24.4025010032 32 49.9 44 54 26 456 2 29.4025010033 33 51.5 44 54 25.5 477 2 32.001

25010034 34 52.4 44 54 29 490 2 33.8025010036 36 54.9 44 57 32 545 2 35.1025010038 38 58 44 58 33 592 2 39.40‘

c IMPACT sockets56IMP3/4'' a-drive, for power drivers, extra deep, Chrome Alloy Steel,gunmetal finish.

‘


25020021 21 35 44 100 75 864 2 36.6025020022 22 36.5 44 100 75 854 2 36.6025020024 24 39.5 44 100 74.5 838 2 36.6025020027 27 43.5 44 100 72.5 800 2 38.001

25020030 30 47.4 44 100 72.5 860 2 42.8025020032 32 49.9 44 100 72 922 2 43.3025020034 34 52.4 44 100 71.5 983 2 50.5025020036 36 54.9 44 100 71 1038 2 56.00‘

c IMPACT sockets25093/4'' a-drive, for power drivers, extra deep, with reduced diameter,Chrome Alloy Steel, gunmetal finish.

‘


25090027 27 40.5 44 100 72.5 672 2 47.6025090030 30 44.3 44 100 72.5 728 2 51.5025090032 32 46.8 44 100 72 778 2 55.0025090033 33 48 44 100 72 803 2 56.00‘

for Trilex wheels‘

Accessory tools for IMPACT sockets3/4'' a square driveoutside D F 20, inside a H 20Finish: Chrome Alloy Steel, gunmetal finish

Extensions

‘


35010001 560/7IMP 180 44 805 5 61.5035010002 560/10IMP 250 44 1051 5 70.5035010003 560/13IMP 330 44 1305 5 83.50‘


‘


35020000 99 44 657 2 72.00‘

Adaptors

‘


35030003 568IMP 3/4 1/2 56 44 335 5 27.8035030006 569IMP 3/4 1 65 44 477 5 31.80‘

Rubber ring5591IMP‘

RCode g S €‘

39013650 3 10 2.45‘

for sockets and accessories‘

Connecting pin5592IMP‘

RCode g S €‘

39023540 3 10 1.00‘


147

1'' DIN3121

ISO1174-2

4

c IMPACT sockets60IMP1'' a-drive, DIN 3129/ISO 2725-2, for power drivers, Chrome Alloy Steel,gunmetal finish.

‘


26010024 24 41.5 54 58 28 638 2 32.0026010027 27 45 54 60 30 654 2 30.3026010030 30 49 54 62 32 688 2 36.6026010032 32 51.5 54 63 32 694 2 35.401

26010033 33 52.5 54 63 31.5 692 2 37.4026010036 36 56.5 54 67 34.5 754 2 43.2026010038 38 59 54 70 37 836 2 45.8026010041 41 63 54 70 36.5 892 2 46.401

26010042 42 64.5 54 73 39 970 1 55.5026010046 46 69.5 54 76 41 1106 1 56.0026010050 50 74.5 54 82 52 1362 1 68.5026010055 55 81 54 87 57 1669 1 87.001

26010060 60 87 54 91 61 1960 1 101.00‘

c IMPACT sockets66IMP1'' a-drive, for power drivers, extra deep, Chrome Alloy Steel, gunmetal finish.

‘


26020024 24 41.5 54 110 80 1431 2 51.5026020027 27 45 54 110 80 1393 2 52.5026020030 30 49 54 110 79.5 1338 2 54.5026020032 32 51.5 54 110 79 1296 2 56.501

26020033 33 52.5 54 110 78.5 1274 2 60.0026020036 36 56.5 54 110 78 1312 2 60.5026020038 38 59 54 110 77 1355 2 65.0026020041 41 63 54 110 76 1504 2 69.001

26020046 46 69.5 54 110 72 1711 2 84.50‘

c IMPACT sockets26091'' a-drive, for power drivers, extra deep, with reduced outside diameter,Chrome Alloy Steel, gunmetal finish.

‘


26090027 27 42.3 54 110 80 1001 2 58.5026090030 30 46 54 110 79.5 1047 2 64.5026090032 32 48.5 54 110 79 1015 2 68.0026090033 33 49.8 54 110 78.5 1102 2 68.00‘

for wheel nuts‘

Accessory tools for IMPACT sockets1'' a square driveoutside D F 25, inside a H 25Finish: Chrome Alloy Steel, gunmetal finish

Extensions

‘


36010001 859/7IMP 180 54 1361 2 90.0036010002 859/13IMP 330 54 2168 2 116.00‘


‘


36020000 125 54 1244 1 128.00‘

Adaptors1''; 11/2''

‘


36030005 866IMP 1 3/4 70 54 565 2 52.0036030006 867IMP 1) 11/2 1 90 86 2100 1 331.00‘

1) also for Multipower No MP300-5000 (page 184) ‘

Rubber ring6091IMP‘

RCode g S €‘

39014850 8 10 3.00‘


Connecting pin6092IMP‘

RCode g S €‘

39025050 7 10 1.55‘


Power tools

148

4

k BITSDIN 3128, for Phillips screws.

‘

Phillips- outside L RCode No Recess®

E '' mm g S €‘

08000000 1218 000 C 4 - 28 3 5 3.7008000001 1219 00 C 4 - 28 3 5 3.7008010000 1220 0 C 6.3 1/4 25 5 10 1.5508010001 1221 1 C 6.3 1/4 25 5 10 0.851

08010002 1222 2 C 6.3 1/4 25 5 10 0.8508010003 1223 3 C 6.3 1/4 25 5 10 0.8508030001 1231 1 C 8 5/16 32 9 10 2.8008030002 1232 2 C 8 5/16 32 10 10 2.801

08030003 1233 3 C 8 5/16 32 10 10 2.8008030004 1234 4 C 8 5/16 32 12 10 3.00‘

outside E DIN 3126/ISO 1173Phillips-Recess® DIN 5260extra hard for self tapping and other hardened screws.‘

l BITSfor POZIDRIV/SUPADRIV® screws, extra hard.

‘

POZIDRIV/ outside L RCode No SUPADRIV®

E '' mm g S €‘

08050001 PZ1221 1 C 6.3 1/4 25 5 10 0.8508050002 PZ1222 2 C 6.3 1/4 25 5 10 0.8508050003 PZ1223 3 C 6.3 1/4 25 6 10 0.85‘

outside E DIN 3126/ISO 1173‘

r BITS screwdriversDIN 3127/ISO 2351, for slotted screws.

‘

a x b outside L RCode No mm E '' mm g S €‘

08070017 1157 0.25 x 1.5 C 4 - 28 3 5 3.9008070018 1158 0.4 x 2.0 C 4 - 28 3 5 3.9008070019 1159 0.4 x 2.5 C 4 - 28 3 5 3.9008070020 1160 0.5 x 3.0 C 6.3 1/4 39 5 10 3.001

08070021 1161 0.5 x 4.0 C 6.3 1/4 39 6 10 3.0508070022 1162 0.6 x 3.5 C 6.3 1/4 39 6 10 3.0008070023 1163 0.6 x 4.5 C 6.3 1/4 39 6 10 3.0508070024 1164 0.8 x 4.0 C 6.3 1/4 39 6 10 3.001

08070025 1165 0.8 x 5.5 C 6.3 1/4 39 7 10 3.0508070026 1166 1.0 x 5.5 C 6.3 1/4 39 8 10 3.0008070030 1166/1 1.2 x 6.5 C 6.3 1/4 39 9 10 3.0008070027 1167 1.2 x 8.0 C 6.3 1/4 39 12 10 3.251

08070028 1168 1.6 x 8.0 C 6.3 1/4 39 12 10 3.1508070029 1169 1.6 x 10.0 C 6.3 1/4 39 16 10 3.5508080030 1180 0.8 x 5.5 C 8 5/16 41 10 10 3.4508080031 1181 1.0 x 5.5 C 8 5/16 41 11 10 3.551

08080032 1182 1.2 x 6.5 C 8 5/16 41 13 10 3.5508080033 1183 1.2 x 8.0 C 8 5/16 41 15 10 4.3508080034 1184 1.6 x 8.0 C 8 5/16 41 15 10 4.3508080035 1185 1.6 x 10.0 C 8 5/16 41 19 10 5.451

08080036 1186 2.0 x 12.0 C 8 5/16 41 24 10 6.40‘


m BITSfor tri-square socket head screws(XZN®).

‘

outside L RCode No size E '' mm g S €‘

08200004 1350 M4 C 6,3 1/4 25 4 10 2.9508200010 1356 M5 C 6.3 1/4 25 5 10 2.9008200011 1357 M6 C 6.3 1/4 25 5 10 2.9008200012 1358 M8 C 8 5/16 28 10 10 3.401

08200013 1359 M10 C 8 5/16 38 15 10 4.3008200014 1360 M12 C 8 5/16 38 20 10 4.75‘

outside E DIN 3126/ISO 1173DIN 65254 (M4, M5, M6)Application: No 1350, size M4, for door lock attachment on the Audi TT,VW Golf, Bora, Passat B5, Lupo, New Beetle‘

n BITSfor inside TORX® screws

‘

C outside L RCode No size mm E '' mm g S €‘

08130003 1407 T 3 1.1 C 4 - 28 3 5 3.6508130004 1408 T 4 1.3 C 4 - 28 3 5 3.6508130005 1409 T 5 1.3 C 4 - 28 3 5 3.6508130006 1410 T 6 1.6 C 6.3 1/4 26 5 10 3.551

08130007 1411 T 7 2.0 C 6.3 1/4 26 5 10 3.2508130008 1412 T 8 2.3 C 6.3 1/4 26 5 10 3.2508130009 1413 T 9 2.5 C 6.3 1/4 26 5 10 3.2508130010 1414 T 10 2.7 C 6.3 1/4 26 5 10 3.101

08130015 1415 T 15 3.3 C 6.3 1/4 26 5 10 3.1008130020 1416 T 20 3.8 C 6.3 1/4 26 5 10 3.1008130025 1417 T 25 4.4 C 6.3 1/4 26 6 10 3.0008130027 1418 T 27 5.0 C 6.3 1/4 26 6 10 3.001

08130030 1419 T 30 5.5 C 6.3 1/4 26 6 10 3.0008130040 1420 T 40 6.6 C 6.3 1/4 26 7 10 3.0008130045 1421 T 45 7.8 C 6.3 1/4 26 8 10 3.7508140027 1430 T 27 5.0 C 8 5/16 35 11 10 4.751

08140030 1431 T 30 5.5 C 8 5/16 35 11 10 4.7508140040 1432 T 40 6.6 C 8 5/16 35 12 10 5.2008140045 1433 T 45 7.8 C 8 5/16 35 14 10 5.2008140050 1434 T 50 8.8 C 8 5/16 35 14 10 5.501

08140055 1435 T 55 11.2 C 8 5/16 35 20 10 5.70‘

outside E DIN 3126/ISO 1173Application: No 1416, size T20, for the door handle attachment forMercedes-Benz types 168 and 203No 1421, size T45, for removing and refitting the front doors on the VWGolf III and Vento from model year 93 onNo 1435, size T55, for screws in rear seats of BMW X6 Model E71,7 series Model F01/F02‘

n BITS1427for inside TORX® screws.

‘

outside L RCode size E '' mm g S €‘

08131025 T 25 C 6.3 1/4 65 18 1 3.15‘

For BMW series 3 and 5outside E DIN 3126/ISO 1173‘

149

4

o BITSwith hollow point for inside TORX® screws(TORX® TAMPER RESISTANT).

‘

C outside L RCode No size mm E '' mm g S €‘

08160010 1440 T 10 2.7 C 6.3 1/4 26 6 10 4.6008160015 1441 T 15 3.3 C 6.3 1/4 26 6 10 4.6008160020 1442 T 20 3.8 C 6.3 1/4 26 6 10 4.4008160025 1443 T 25 4.4 C 6.3 1/4 26 6 10 4.301

08160027 1444 T 27 5.0 C 6.3 1/4 26 6 10 4.3008160030 1445 T 30 5.5 C 6.3 1/4 26 6 10 4.3008160040 1446 T 40 6.6 C 6.3 1/4 26 6 10 4.30‘


ä 5-star BITS with hollow point, for female 5-star screws with a centring pin.

‘

outside L RCode No E '' mm g S €‘

08161010 1440 TPI 10 C 6.3 1/4 26 6 5 5.6008161015 1441 TPI 15 C 6.3 1/4 26 6 5 5.6008161020 1442 TPI 20 C 6.3 1/4 26 6 5 5.4508161025 1443 TPI 25 C 6.3 1/4 26 6 5 5.451

08161027 1444 TPI 27 C 6.3 1/4 26 6 5 5.3008161030 1445 TPI 30 C 6.3 1/4 26 6 5 5.3008161040 1446 TPI 40 C 6.3 1/4 26 6 5 5.30‘


5-star BITS set1204/8Storage facility for BITS screwdriver inserts.Content:1 bit-holder No 412ä 7 BITS screwdriver inserts for

female 5-star screws with centring pin,sizes TPI 10, 15, 20, 25, 27, 30, 40.

For generators, motor management units,airflow sensors, door trim, immobilisers andinjection pumps (e.g. Ford, Mercedes-Benzcars & HGVs, Rover, Volvo, VW/Audi).

‘

RCode g S €‘

96080113 87 1 57.00‘

i BITSDIN 7426/ISO 3109,for socket head screws, extra hard.

‘

B outside L RCode No mm E '' mm g S €‘

08090003 1300 3 C 6.3 1/4 25 4 10 2.0508090004 1301 4 C 6.3 1/4 25 5 10 2.0508090005 1302 5 C 6.3 1/4 25 5 10 2.0508090006 1303 6 C 6.3 1/4 25 6 10 2.051

08090008 1304 8 C 6.3 1/4 30 11 10 2.50‘


i BITS1299for inside hexagon screws, for operating the adjusting screwson torque wrenches No 720, 721,730 and 730N.

‘

B outside L RCode mm E '' mm g S €‘

08090002 2 C 6.3 1/4 34 4 10 3.10‘


s BITS screwdrivers13008for TRI-WING® screws.

‘

TRI- outside L RCode WING®

E '' mm g S €‘

08250000 0 C 6.3 1/4 25 5 10 5.2008250001 1 C 6.3 1/4 25 5 10 5.2008250002 2 C 6.3 1/4 25 5 10 5.2008250003 3 C 6.3 1/4 25 5 10 5.201

08250004 4 C 6.3 1/4 25 5 10 5.2008250005 5 C 6.3 1/4 25 5 10 5.2008250006 6 C 6.3 1/4 25 8 10 6.75‘


t BITS screwdrivers13010for TORQ-SET® screws.

‘

TORQ- outside L RCode SET®

E '' mm g S €‘

08260000 0 C 6.3 1/4 25 5 10 5.3008260001 1 C 6.3 1/4 25 5 10 5.3008260002 2 C 6.3 1/4 25 5 10 5.3008260003 3 C 6.3 1/4 25 5 10 5.301

08260004 4 C 6.3 1/4 25 5 10 5.3008260005 5 C 6.3 1/4 25 5 10 5.3008260006 6 C 6.3 1/4 25 5 10 5.6508260008 8 C 6.3 1/4 25 5 10 5.651

08260010 10 C 6.3 1/4 25 5 10 5.6508260016 1/4 A C 8 5/16 32 11 10 6.2508260020 5/16 A C 8 5/16 32 11 10 6.2508260024 3/8 A C 8 5/16 32 11 10 6.25‘


Power tools

150

4

BITS box1204/21-2

UStorage box withscrewdriver bits.Content:1 magnetic bit-holderk 3 Bits, sizes 1; 2; 3

for Phillips screwsr 4 Bits, sizes 0.5 x 3.0; 0.6 x 4.5;

0.8 x 5.5; 1.2 x 6.5 mm; for slotted screws

n 6 Bits, sizes T10; T15; T20; T25;T30; T40; for inside TORX® screws

b 3 Bits, sizes 4; 5; 6 mm; for inside hexagon screws

t 4 Bits, sizes 4; 6; 8; 10 mm; for TORQ-SET® screws

‘

RCode g S €‘

96080122 181 1 43.10‘

Spinner handles4000for BITS screwdriver bits with outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3, handle of impact proof plastic. Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed justas easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

inside d L1 L2 RCode b '' mm mm mm g S €‘

18071026 D 6.3 1/4 11 75 190 103 5 24.20‘


Spinner with magazine holder4006/1for 6 BITS screwdriver bits (25 mm)with 1/4'' outer hexagon,DIN 3126/ISO 1173 C 6.3,transparent plastic handle for storingBITS with rotating selection cap, internal hexagon and powerfulpermanent magnet.

‘


18080017 D 6.3 1/4 10 120 230 124 1 31.10‘


BIT holder12504for BITS screwdriver bits with outside hexagon 1/4''DIN 3126/ISO 1173 C 6.3, flexible shaft, handle of impact proof plastic.

‘

inside L1 L2 RCode b '' mm mm g S €‘

18101016 D 6.3 1/4 175 290 168 10 16.30‘


BIT holder12503for BITS screwdriver bits with outsidehexagon 1/4'' DIN 3126/ISO 1173 C 6.3,inside hexagon with magnet, stubbyversion, handle of impact proof plastic.

‘

inside L1 L2 RCode b '' mm mm g S €‘

18110016 D 6.3 1/4 10 65 50 10 13.20‘


BITS box1201Storage box with screwdriver bits.Content:1 magnetic bit-holderk 3 Bits, sizes 1; 2; 3 for Phillips

screwsl 3 Bits, sizes 1; 2; 3 for

POZIDRIV/SUPADRIV® screwsr 3 Bits, sizes 0.6 x 4.5; 0.8 x 5.5;

1.2 x 6.5 mm; for slotted screwso 6 Bits, size T10; size T15; size T20;

size T25; size T30; size T40; for inside TORX® screws (TORX® TAMPER RESISTANT)


‘

RCode g S €‘

96080102 195 1 34.70‘

BITS box1204/21-1

UStorage box withscrewdriver bits.Content:1 magnetic bit-holderk 4 Bits, sizes 1; 2 (2x); 3

for Phillips screwsl 4 Bits, sizes 1; 2 (2x); 3

for POZIDRIV/SUPADRIV® screwsn 9 Bits, sizes T10; T15; T20 (2x);

T25 (2x); T27; T30; T40; for inside TORX® screws


‘

RCode g S €‘

96080121 185 1 28.60‘

151

4

BIT holder4007for BITS screwdriver bits with outside hexagon 1/4''DIN 3126/ISO 1173 C 6.3,inside hexagon with magnet,with T-handle.

‘


18090016 D 6.3 1/4 10 200 165 108 5 15.20‘


BIT ratchet415Breversible, 22 teeth, with 2-component handle and inside hexagon, 1/4'', DIN 3126/ISO 1173 D 6.3 for BitsScrewdriver sockets 1/4''. Internal hex drive with a collar-thrust spring(registered design). Bits are easy to insert, lock securely in position andcan be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

inside L b a RCode b '' mm mm mm g S €‘

11131011 D 6.3 1/4 117 22 12 76 5 54.50‘

BIT ratchet415SGBreversible, all steel handle,for BITS screwdrivers withoutside hexagon 1/4''DIN 3126/ISO 1173 C 6.3, 22 teeth.Internal hex drive with a collar-thrust spring (registered design). Bits areeasy to insert, lock securely in position and can be removed just as easily;even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

inside L RCode b '' mm g S €‘

11130011 D 6.3 1/4 117 85 1 56.00‘


Ratcheting BIT holder25Bfor hexagon bits, magnetic location, reversible heads angled,chrome plated.

‘

inside L d1 d2 a1 a2 RCode b '' mm mm mm mm mm g S €‘

41541620 1/4 x 5/16 138 20 23 15 17 105 1 24.40‘

Ratcheting BIT holder4008Positions selectable are clockwise/anticlockwise/fixed with fixed blade.Inner hex. with magnet, for 1/4'' screwdriver bits with outside hexagon 1/4''DIN 3126/ISO 1173 C 6.3.The square drive extension No 3115/1 can be used to adapt 1/4'' socketinserts (outer hex. to 1/4'' outer square). The ratcheting bit holder is fitted with a quick-twist knurled socket to allowthe user to tighten or untighten loosely by hand. Socket mountings aretoothed, heavy-duty and angled at 30°. Ergonomically shaped handle with1/4'' inner square drive, for use with cross-handle, extension bar etc.

‘

inside L1 L2 d RCode b '' mm mm mm g S €‘

18120000 D 6.3 1/4 56 206.5 10 185 8 36.40‘


Ratcheting BIT holder set4008/27/129 piecesContent:1 Ratcheting bit holder No 40083 Bits k 1221; 1222; 12233 Bits l PZ 1221; PZ 1222; PZ 12236 Bits o 1440 T10; 1441 T15;

1442 T20; 1443 T25; 1445 T30;1446 T40

3 Bits i 1301; 1302; 13033 Bits r 1163 0.6 x 4.5; 1165

0.8 x 5.5; 1166/1 1.2 x 6.5 mm1 Square drive extension No 3115/1

with 1/4'' outer hex. and outersquare drives for attaching 1/4'' u sockets

9 Sockets No 40, 1/4'' u sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm

‘

RCode g S €‘

96181202 1025 1 143.70‘

BIT holder3115/2for torque screwdrivers No 760 and No 775, inside hexagon DIN 3126 D4 for BITS screwdriverbits C4, outside hexagon 1/4'' DIN 3126/ISO 1173 E 6.3.

‘

inside outside L RCode b E '' mm g S €‘

31150003 4 mm E 6.3 1/4 60 18 1 16.00‘


BIT holder1200/1with permanent magnet 1/4'' insideand outside hexagon 1/4'' DIN 3126/ISO 1173 C 6.3.

‘

inside outside L RCode b '' E '' mm g S €‘

38120001 D 6.3 1/4 E 6.3 1/4 72 37 5 9.75‘

inside b/outside E DIN 3126/ISO 1173‘

Power tools

152

4

Quick-change holder3825/1for BITS screwdriver bits with 1/4'' external hexagonal driveDIN 3126/ISO 1173 C 6.3,with quick-action chuck, adaptor withexternal hexagonal drive for powered use.

‘

inside outside L RCode b '' E '' mm g S €‘

38250002 D 6.3 1/4 E 6.3 1/4 62 27 1 19.30‘

inside b/outside E DIN 3126/ISO 1173‘

Adaptor, manually operated3115for torque screwdriversNo 760 and No 775,for manually operated socketswith recessed 6.3 (1/4'') square drive DIN 3120/ISO 1174-1 Type C and D,square drive with ball bearing, Chrome Alloy Steel, gunmetal finish.

‘

outside outside L d RCode D '' E '' mm mm g S €‘

31150001 A 6.3 1/4 E 6.3 1/4 50 8.9 16 5 10.90‘

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball)outside E DIN 3126/ISO 1173 Type E‘

Adaptor, manually operated3115/1for manually operated sockets with recessed6.3 (1/4'') square drive DIN 3120/ISO 1174-1Type C and D, square drive with ball bearing,Chrome Alloy Steel.

‘

outside outside L RCode D '' E '' mm g S €‘

31150002 A 6.3 1/4 C 6.3 1/4 25 10 5 5.20‘

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball)outside E DIN 3126/ISO 1173 Type C‘

Adaptor, machine operated3116/1DIN 7428/ISO 3317, with outside hexagon for power operated IMPACTsockets DIN 3129/ISO 2725-2 with inside square DIN 3121/ISO 1174-2.Square drive with spring loaded locking pin, Chrome Alloy Steel, gunmetalfinish.

‘


31160001 E 6.3 1/4 E 6.3 1/4 50 8.9 16 5 20.10‘

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)outside E DIN 3126/ISO 1173 Type E‘

Adaptors, machine operated3216DIN 7428/ISO 3317, with outside hexagon for power operated IMPACTsockets DIN 3129/ISO 2725-2 with inside square DIN 3121/ISO 1174-2.Large collar diameter for better support of IMPACT sockets. Square drivewith spring loaded locking pin, Chrome Alloy Steel, gunmetal finish.

‘

outside outside L d RCode No D '' E '' mm mm g S €‘

32160001 3216/1 E 10 3/8 E 6.3 1/4 50 15.5 23 5 20.7032160002 3216/2* E 10 3/8 E 6.3 1/4 100 15.5 42 5 27.30‘

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)outside E DIN 3126/ISO 1173 Type E* to be discontinued‘

Adaptor, machine operated3316/1DIN 7428/ISO 3317, with outside hexagon for power operated IMPACTsockets DIN 3129/ISO 2725-2 with inside square DIN 3121/ISO 1174-2.Large collar diameter for better support of IMPACT sockets. Square drivewith spring loaded locking pin, Chrome Alloy Steel, gunmetal finish.

‘


33160001 E 12.5 1/2 E 6.3 1/4 50 18 34 5 24.20‘

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)outside E DIN 3126/ISO 1173 Type E‘

BIT holdersquare drive socket, for hand use only, for BITS-Screwdriver bits with outside hexagon 1/4'' or 5/16'' DIN 3126/ISO 1173 C 6.3 or C 8, Chrome Alloy Steel, chrome plated.Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed justas easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

inside inside d L RCode No b '' a '' mm mm g S €‘

11180010 412 D 6.3 1/4 C 6.3 1/4 11.6 25 15 5 14.6012180026 442 D 6.3 1/4 C 10 3/8 16.5 32 30 5 17.0012180030 443 D 8 5/16 C 10 3/8 16.5 32 39 5 18.0013180010 543 D 8 5/16 C 12.5 1/2 22 38 65 5 20.50‘

inside b DIN 3126/ISO 1173inside a DIN 3120/ISO 1174-1‘

153

4

BIT holder412-1c 1/4'' inside hexagon, DIN 3126/ISO 1173 D 6.3.Outer w 10 mm for use in tools with 10 mminternal hex drive or internal double hexagon (e.g. ''FLEXI'' double-ended flexi-joint spanners, T-handle universal joint spanners, box spanners,ratchet ring spanners etc.). Internal hex drive with a collar-thrust spring(registered design). Bits are easy to insert, lock securely in position andcan be removed just as easily; even hex bits with a wide groove(Type E, DIN 3126/ISO 1173).

‘

outside L d RCode E mm mm g S €‘

11180020 10 mm 20 11.6 11 5 12.00‘

BIT holder insert tools736Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed justas easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘

inside J b h S RCode size b '' mm mm mm mm g €‘

58261010 10 D 8 5/16 ; 16 12.5 17.5 47 28.5058262610 10-1 D 6.3 1/4 ; 14 10 17.5 45 29.0058261040 40 D 8 5/16 , 16 12.5 25 112 38.90‘


BITS screwdriverswith outside hexagon DIN 3126/ISO 1173, shape E 6.3 (1/4''), for use in power drivers.

r BITS screwdriversDIN 3127/ISO 2351, for slotted screws.

‘

a x b outside L RCode No mm E '' mm g S €‘

08300635 1242 0.6 x 3.5 E 6.3 1/4 50 8 10 5.2508300840 1244 0.8 x 4.0 E 6.3 1/4 50 9 10 5.2508301055 1246 1.0 x 5.5 E 6.3 1/4 50 10 10 5.2508301265 1248 1.2 x 6.5 E 6.3 1/4 50 12 10 5.551

08301680 1250 1.6 x 8.0 E 6.3 1/4 50 14 10 6.10‘


k BITS screwdriversDIN 3128, for Phillips screws.

‘


E '' mm g S €‘

08310001 1260 1 E 6.3 1/4 50 10 10 2.4008310002 1261 2 E 6.3 1/4 50 11 10 2.4008310003 1262 3 E 6.3 1/4 50 11 10 2.40‘

outside E DIN 3126/ISO 1173Phillips-Recess® DIN 5260‘

l BITS screwdriversfor POZIDRIV/SUPADRIV® screws.

‘

POZIDRIV/ outside L RCode No SUPADRIV®

E '' mm g S €‘

08320001 1270 1 E 6.3 1/4 50 10 10 2.4508320002 1271 2 E 6.3 1/4 50 11 10 2.4508320003 1272 3 E 6.3 1/4 50 11 10 2.45‘


i BITS screwdriversDIN 7426/ISO 3109,for Socket Head Screws.

‘

B outside L RCode No mm E '' mm g S €‘

08330003 1280 3 E 6.3 1/4 50 9 10 6.4508330004 1281 4 E 6.3 1/4 50 10 10 6.4508330005 1282 5 E 6.3 1/4 50 12 10 6.4508330006 1283 6 E 6.3 1/4 50 13 10 6.451

08330008 1284 8 E 6.3 1/4 50 18 10 8.35‘


n BITS screwdriversfor inside TORX® screws.

‘

outside L RCode No size E '' mm g S €‘

08340010 1290 T 10 E 6.3 1/4 70 14 10 7.2008340015 1291 T 15 E 6.3 1/4 70 14 10 7.2008340020 1292 T 20 E 6.3 1/4 70 14 10 7.0008340025 1293 T 25 E 6.3 1/4 70 15 10 6.951

08340027 1294 T 27 E 6.3 1/4 70 16 10 6.9508340030 1295 T 30 E 6.3 1/4 70 16 10 6.8008340040 1296 T 40 E 6.3 1/4 70 18 10 6.80‘


Sockets2801with hexagon inserts for power drivers, hexagon fitted with permanentmagnet, Chrome Alloy Steel, clear lacquered.

‘

A outside d L RCode mm E '' mm mm g S €‘

28010007 7 E 6.3 1/4 12 50 25 5 11.5028010008 8 E 6.3 1/4 13 50 27 5 11.5028010010 10 E 6.3 1/4 15.5 50 35 5 13.1028010013 13 E 6.3 1/4 18.7 50 45 5 19.60‘

Power tools

154

4

Special socket13006registered design, for use on plugs in electronic rack Airbus A320–A340.‘

outside O L RCode E '' mm mm g S €‘

08230001 E 6.3 1/4 11 50 10 10 22.60‘


BIT screwdriver13007for use on plugs in electronic rackAirbus A320–A340.

‘

B outside L RCode '' E '' mm g S €‘

08240006 3/32 E 6.3 1/4 50 10 5 7.90‘


Set775/30N/2for use on plugs in electronic rack Airbus A320–A340.Content: 1 each Torque Screwdriver TORSIOMAX No 775/30 Special Socket No 13006BIT-Screwdriver insert No 13007

‘

RCode g S €‘

96510502 235 1 295.50‘

IMPACT driver set4060for screw sizes M5–M10,in strong metal case.Content:1 each IMPACT driver No 4030

Adaptors No 4035; No 4036r BITS screwdrivers for slotted

screws No 4040–4044k BITS screwdrivers for Phillips-

screws No 4050–4052i BITS screwdrivers for Hex. Socket

Head screws No 4055–4058

‘

RCode g S €‘

96322001 1410 1 464.25‘

IMPACT driver4030with inside hexagon for BITSscrewdriver inserts No 4040–4058,suitable for screws M 5–M 10,torque 120 N m.

‘

inside L RCode b '' mm g S €‘

32200001 3/8 138 617 1 268.00‘

Adaptorswith outside hexagon,for IMPACT screwdriver No 4030.

‘

outside outside L RCode No E'' D '' mm g S €‘

32210001 4035 3/8 3/8 38 34 1 13.8033210001 4036 3/8 1/2 38 43 1 15.00‘

r BITS screwdriversfor slotted screws,for IMPACT driver No 4030.

‘

a x b outside L RCode No mm E'' mm g S €‘

08400010 4040 1.0 x 7 3/8 40 17 10 10.7008400014 4041 1.4 x 9 3/8 40 19 10 10.7008400016 4042 1.6 x 10 3/8 40 21 10 11.4008400020 4043 2.0 x 12 3/8 40 20 10 13.101

08400015 4044 1.5 x 13 3/8 40 24 10 14.6008400025 4045 2.5 x 16 3/8 40 30 10 16.00‘

k BITS screwdriversfor Phillips screws, for IMPACT driver No 4030.

‘


E'' mm g S €‘

08410002 4050 2 3/8 35 17 10 11.6008410003 4051 3 3/8 35 17 10 11.6008410004 4052 4 3/8 35 17 10 11.60‘

Phillips-Recess® DIN 5260‘

i BITS screwdriversfor socket head screws,for IMPACT driver No 4030.

‘

B outside L RCode No mm E'' mm g S €‘

08420005 4055 5 3/8 35 16 10 13.4008420006 4056 6 3/8 35 16 10 13.4008420008 4057 8 3/8 35 19 10 13.4008420010 4058 10 3/8 35 23 10 13.40‘

1

1

1

5

Torque tools,Torque testers

2 000000

7794-2

7791 + 7791-2

7707 W

Torque familyOverview

730D

730N

730

721

755

713R

720Nf

721Nf

71/80

73Nm/15

MP300

760

3

cut-out indicating No Capacity Page

+ 730D 10–650 N m 164

730N 2–650 N m 166

730 4–800 N m 167

720Nf 160–800 N m 168

721 6–300 N m 168

721Nf 160–1000 N m 169

755 1.5–300 N m 170

713R 3–400 N m 171

712R/6 3–60 N m 171

71 160–800 N m 172, 173

73Nm/15 2–15 N m 173

775 2–1000 cN m 174

760 15–600 cN m 175

MP300 800–5000 N m 184

perfectControl 7794-1 0.4–400 N m 187

perfectControl 7794-2 0.4–400 N m 187

Manutork 7791 0.4–400 N m 190

Manutork 7792 25–1100 N m 191

Test attachments 7790, 7791-2 –10 N m 191 for torque screwdrivers

Torque tester 7707 W 0.4–1100 N m 192

Torque wrenches

157

Torque screwdrivers

MULTIPOWER

Torque testers and calibrating units

Insert tools fortorque wrenches

177 182-

730D

730N

730

721

755

713R

720Nf

721Nf

71/80

73Nm/15

MP300

760

4

1

158

171

QuickRelease

Firm locking and rapid change of any insert tools

Easy extension setting

Where the insert tool requires an extension adjustment, simply enter the new value. Recalculation using complicated formulae is no longer necessary.

Electronic torque wrench/angle-controlled wrench

5

1

159

Angle-controlled measurements without a reference arm

Broad measuring range (5% – 100% of rated value)

Extremely wide range of angle measurement

Units of measurement N m / ft.lb / in.lb

Clockwise and anticlockwise use

For use with all insert tools 9x12 and 14x18

Quickselect rapid recall of predefind sets of operating parameters

Defined sequence A number of repeated joints can be grouped as a defined sequence

Readings can either be directly stored, transmitted to the PC or simply displayed

Password protection tamper proof use

Freely selectable names for each series of test

Various languages available

Works-specific identifier

Programmable via PC

Resistant to oils, grease, fuels, brake fluids and Skydrol

Wide range of application: –20°C to +60°C

Meets requirements of DKD-R 3-7, Class 2

Deviation of indication ± 1%

Warning signals

Can be selected as either acoustic (buzzer), tactile (vibration in the handle), visual (LEDs and display) or a combination of these. The point at which the warning signal is triggered can be freely set.

Amazingly simple handling

All functions are selected using the arrow keys. The visual guidance system makes operation a simple matter.

Free choice of grip The reading will always be accurate, irrespective of where you grip the torque wrench.

Data output

USB interface

6

1

160

QuickRelease safety lock

Measure, cut out and record:

When the preset torque is reached, the torque wrench cuts out and indicates this fact to the user via a definite tactile and audible signal. The tightening torques are stored. The data can be transferred to a PC for evaluation and documentation.

The square drive

Enables a broad range of insert tools

164

165

No 7395-1

MANOSKOP® 730DElectromechanical torque wrench

7

1

161

Cut-out and indicating

Displays the torque actually applied after the wrench cuts out. In this way, the user has the opportunity to optimise his or her working methods.

Units of measurement: N m / ft.lb / in.lb

Automatic keypad lock

Display also works for anticlockwise torque

Angle-controlled measurement without a reference arm using a supplementary module

Overload protection by means of acoustic and visual signals

Easy-to-read display

2-component handle

Has ergonomically designed, green softer layers and is resistant to oils, grease, fuels, brake fluids and Skydrol.

Dual stop signal

With tactile and acoustic cut-out signals

Rapid setting

The convenient keypad enables the torque wrench to be quickly and easily set

Automatic compensation to achieve correct tightening torque even if a changed extension is entered

Different tolerance limits can be set for each joint

Visual red and green signals in the display confirm the status of the joint

Additional security for presets using PIN code

Automatic notification of the next calibration date

Calibration with perfectControl calibrating and adjusting unit No 7794-2


Data output

USB interface

Power supply

Two 1.5 V AA batteries

Angle controlled tightening

Simply attach the Angle Module No 7395-1 and connect the cable to the interface

8

1

162

Protected mechanism Extremely resistant to mechanical wear, protected against dirt inside the outer housing

The square drive

Enables a broad range of tightening tools

QuickRelease safety lock

Firm locking and rapid change of insert tools thanks to the QuickRelease safety lock

Integrated clockwise and anticlockwise operation

Simply by turning over the wrench and insert tool

166

MANOSKOP® 730NMechanical torque wrench

9

1

163

Accurate one-handed setting – quick & easy control using the knob at the end of the handle

Audible setting positions

Fail-safe setting mechanism in the knob

Clearly readable twin scale (N m and ft.lb)

Noticeable double signals when the preset torque is reached

Ring scale with fine settings

For the black measuring range on the twin scale

Rapid adjustment

From outside, no disassembly of the torque wrench

No need for manual reset to zero

Thanks to the wear-free triggering cam system. The measuring element is only under load while force is being applied.

Easily readable double scale

The colour differentiation between the N m and ft.lb scales simplifies fine setting

Two-component handle

Made of extremely tough, impact resistant plastic with a kind-to-the-hands softer layer QuickSelect

Rapid setting:

Pull, set, lock. All using the one setting knob

Square drives with QuickRelease safety locks – for 9x12 mm and 14x18 mm

Handle is resistant to oils, grease, fuels, brake fluids and Skydrol


176 182–

Torque tools

5

164

Basic wrenches with tool carrier for insert tools730D

‘

Setting/display resolution J b h L LF SF R R gCode size W W W Nm ft.lb in.lb mm mm mm mm mm mm g with box €‘

96501710 10 10–100 N m 7.4–75 ft.lb 90–900 in.lb 0.2/0.1 0.2/0.1 2/1.0 ; 28 23 467 426.5 17.5 1085 1510 399.5596501720 20 20–200 N m 15–150 ft.lb 180–1800 in.lb 0.5/0.1 0.5/0.1 5/1.0 , 28 23 548 515 25 1361 1896 429.0096501740 40 40–400 N m 30–300 ft.lb 360–3600 in.lb 1.0/0.1 1.0/0.1 10/1.0 , 28 23 688 655 25 1765 5155 625.8096501765 65 65–650 N m 48–480 ft.lb 580–5800 in.lb 1.0/0.1 1.0/0.1 10/1.0 , 30.6 25.6 870 837 25 3300 6000 775.80‘

730DR Basic wrench with ratchet insert tool

‘

Setting/display resolution D R R gCode size W W W Nm ft.lb in.lb '' g with box €‘

96501810 10 10–100 N m 7.4–75 ft.lb 90–900 in.lb 0.2/0.1 0.2/0.1 2/1.0 1/2 1232 1657 463.5596501820 20 20–200 N m 15–150 ft.lb 180–1800 in.lb 0.5/0.1 0.5/0.1 5/1.0 1/2 1663 2198 497.0096501840 40 40–400 N m 30–300 ft.lb 360–3600 in.lb 1.0/0.1 1.0/0.1 10/1.0 3/4 2232 4722 726.8096501865 65 65–650 N m 48–480 ft.lb 580–5800 in.lb 1.0/0.1 1.0/0.1 10/1.0 3/4 3767 6530 876.80‘

Üü

730D/20

Service work & series production MANOSKOP® – indicating and cut-out• tactile and acoustic trigger signal• mount for interchangeable insert tools• QuickRelease safety lock• fast setting using convenient keypad• automatic compensation to achieve correct tightening torque even if a changed extension is entered• overload protection by means of acoustic and visual signals• automatic keypad lock prevents inadvertent changes• angle-controlled measurements without a reference arm using Angle Module No 7395-1 (refer to page 165)

• display also works for anticlockwise torque• units of measurement: N m, ft.lb, in.lb• different tolerance limits can be set for each joint• visual red and green signals in the display confirm the status of the joint • additional security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save,deviating extension) using PIN code

• up to 7.500 measurements can be stored• USB interface• automatic notification of the next calibration date• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706• two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels,brake fluids and Skydrol)

• with certificate• in sturdy plastic case (sizes 40 and 65 in steel case)• patents applied for• supplied with two 1.5 V AA batteries. AA/LR6, 1.2 V rechargeable cells may also be used.• display deviation value ± 2%

5

165

USB adaptor, jack cable andsoftware No 7732 for No 730D

7759-3

Documentation and management of readings on a PC• Read out stored wrench data and joint readings:- Joint identifier- Tool serial number- Date and time of tightening operation- Target torque or target angle- Torque level at which the tool cuts out - Tightening torque or angle reached- Tolerances- Joint evaluation

• Storage of joint data in a database• Delete or print highlighted joints from the database• Export displayed joint data to a CSV file (compatible with Excel)• 13 languages• User management• Define new PIN• Delete joint data stored in wrench

System requirements:• PC• Microsoft Windows 98 SE or compatible operating system with USBsupport

• USB connection• Installed ODBC driver for Access data

‘

L RCode m g €‘

96583627 1.5 137 120.40‘

Angle Module for No 730D7395-1Registered design, angle-controlled measurement without a referencearm. For torque wrench No 730D from software release 1.5.8. Torque wrenches No 730D fitted with older releases of the software canbe upgraded. Simply attach the module and connect to the torque wrenchinterface and the No 730D can be used for angle controlled tightening.The measurements are read off and settings made via the torque wrench.When the preset snug point is reached, the torque wrench automaticallyswitches over to angle-controlled measurement in degrees. Depending onthe options selected, the torque wrench will either cut out when the presetangle is reached or an alarm is heard. One 1.5 V battery is included in thepackage. Deviation of indication ± 1%.

‘

RCode g €‘

96583628 387 408.50‘

7395-1

7395-1+730D

176 182–

Torque tools

5

166

Service MANOSKOP® 730N• cut-out type• mount for interchangeable insert tools• QuickRelease safety lock• fast, accurate setting thanks to QuickSelect quick-action adjuster• dual stop signal• easy-to-read double scale with colour coding to differentiate between N m and ft.lb scales• the measuring element is only under load while force is being applied, no need for manual reset to zero• can be applied for either clockwise or anticlockwise tightening by turning the inserts over• any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g.forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.

• two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels,brake fluids and Skydrol)

• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.

• with certificate• registered design• display deviation value ± 3%

Basic wrenches with tool carrier for insert tools730N

‘

Fine scale J b h L LF SF RCode size W W X X X mm mm mm mm mm mm g €‘

50181002 2 2–20 N m 20–180 in.lb 1 N m 10 in.lb 0.2 N m ; 28 23 275 226 17.5 737 222.0050181005 5 10–50 N m 7–37 ft.lb 5 N m 1 ft.lb 0.25 N m ; 28 23 330 280.5 17.5 831 242.0050181010 10 20–100 N m 15–75 ft.lb 10 N m 2.5 ft.lb 0.5 N m ; 28 23 386 336 17.5 988 255.0050181012 12 25–130 N m 20–95 ft.lb 10 N m 2.5 ft.lb 0.5 N m , 28 23 421 379 25 1128 268.001

50181020 20 40–200 N m 30–150 ft.lb 10 N m 5 ft.lb 1 N m , 28 23 467 424.5 25 1264 291.0050181040 40 80–400 N m 60–300 ft.lb 20 N m 10 ft.lb 2 N m , 28 23 607 564.5 25 1655 423.0050181065 65 130–650 N m 100–480 ft.lb 50 N m 20 ft.lb 2.5 N m , 30.6 25.6 890 848 25 3231 633.0050581002 a/2 20–180 in.lb 1.5–15 ft.lb 10 in.lb 0.5 ft.lb 2 in.lb ; 28 23 275 226 17.5 737 243.001

50581005 a/5 90–450 in.lb 7–37 ft.lb 50 in.lb 1 ft.lb 2.5 in.lb ; 28 23 330 280.5 17.5 831 241.0050581010 a/10 180–900 in.lb 15–75 ft.lb 100 in.lb 2.5 ft.lb 5 in.lb ; 28 23 386 336 17.5 988 261.0050581020 a/20 350–1800 in.lb 30–150 ft.lb 100 in.lb 5 ft.lb 10 in.lb , 28 23 467 424.5 25 1264 291.0050581040 a/40 60–300 ft.lb 800–3600 in.lb 20 ft.lb 100 in.lb 2 ft.lb , 28 23 607 564.5 25 1655 423.00‘

Torque wrenches with permanently installed ratchet730NRin sturdy plastic case (size 65 in steel case). Deviation of indication ± 4%.

‘

Fine scale D b1 b2 h1 h2 L LF R R gCode size W W X X X '' mm mm mm mm mm mm g with box €‘

96502105 5QR FK* 10–50 N m 7–37 ft.lb 5 N m 1 ft.lb 0.25 N m 3/8 28 29 23 14.5 372.5 291 961 1386 357.8596502110 10QR FK* 20–100 N m 15–75 ft.lb 10 N m 2.5 ft.lb 0.5 N m 1/2 28 29 23 14.5 428.5 346.5 1129 1554 369.8596502120 20QR FK* 40–200 N m 30–150 ft.lb 10 N m 5 ft.lb 1 N m 1/2 28 41 23 18 526 438 1589 2014 413.8596502140 40 FK 80–400 N m 60–300 ft.lb 20 N m 10 ft.lb 2 N m 3/4 28 50 23 30.7 657 564.5 2122 2657 564.301

96502165 65 FK 130–650 N m 100–480 ft.lb 50 N m 20 ft.lb 2.5 N m 3/4 30.6 50 25.6 30.7 940 915 3698 6188 842.10‘

* Ratchet has quick-release safety lock Üü‘

730N/10

Üü

730NR/20QR FK

176 182–

Üü

5

167

Service MANOSKOP® 730• cut-out type• mount for insert/shell tools• QuickRelease safety lock (sizes 5–65)• rapid setting (sizes 2–65)• dual stop signal• twin scales N m/ft.lb and N m/in.lb (sizes 5–80)• the measuring element is only under load while force is being applied, no need for manual reset to zero• can be applied for either clockwise or anticlockwise tightening by turning the inserts over• any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g.forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.

• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment withoutdisassembly.

• with certificate• display deviation value ± 4%

Basic wrenches with tool carrier for insert tools730

‘

J b h L LF SF RCode size W X mm mm mm mm mm mm g €‘

50180002 2 4–20 N m 0.5 N m ; 27.5 23 178.5 174 17.5 315 194.0050180004 4 8–40 N m 1 N m ; 27.5 23 222 218 17.5 395 199.0050580001 a/2-1 17.5–87.5 in.lb 2.5 in.lb ; 27.5 23 178.5 174 17.5 315 228.0050580002 a/2 30–175 in.lb 5 in.lb ; 27.5 23 178.5 174 17.5 315 205.001

50580004 a/4 70–350 in.lb 10 in.lb ; 27.5 23 222 218 17.5 395 209.00‘

‘

J b h L LF SF RCode size W W X X mm mm mm mm mm mm g €‘

50180005 5 6–50 N m 5–36 ft.lb 2 N m 1 ft.lb ; 28 23 315 288 17.5 805 209.0050180010 10 20–100 N m 15–72.5 ft.lb 2.5 N m 2.5 ft.lb ; 28 23 370 343 17.5 965 222.0050180012 12 25–130 N m 20–95 ft.lb 2.5 N m 2.5 ft.lb , 28 23 410 390 25 1100 233.0050180020 20 40–200 N m 30–145 ft.lb 5 N m 5 ft.lb , 28 23 455 435 25 1250 252.001

50180040 40 80–400 N m 60–300 ft.lb 10 N m 10 ft.lb , 28 23 590 570 25 1880 369.0050180065 65 130–650 N m 100–480 ft.lb 20 N m 20 ft.lb , 30.6 25.6 875 855 25 3280 549.0050580005 a/5 6–50 N m 50–440 in.lb 2 N m 10 in.lb ; 28 23 315 288 17.5 805 208.0050580010 a/10 20–100 N m 180–880 in.lb 2.5 N m 20 in.lb ; 28 23 370 343 17.5 965 228.001

50580012 a/12 25–130 N m 225–1150 in.lb 2.5 N m 25 in.lb , 28 23 410 390 25 1100 245.0050580020 a/20 40–200 N m 350–1750 in.lb 5 N m 50 in.lb , 28 23 455 435 25 1250 252.00‘

730/2

730/5

Basic wrench with tool carrier for shell tools730

‘

K b h L LF SF RCode size W W X X mm mm mm mm mm mm g €‘

50180080 80 160–800 N m 120–600 ft.lb 20 N m 20 ft.lb 46 43 970 990 95 5377 776.00‘

Use shell adaptor No 7370/80 to make 14 x 18 mm insert tools fit.‘

24.5x28

Torque tools

5

168

Torque wrench with square drive720Nf

‘

D b h L LF SF RCode size W W X X '' mm mm mm mm mm g €‘

50190081 80 160–800 N m 120–600 ft.lb 20 N m 20 ft.lb 3/4 45 42 1034 938 0 6102 763.00‘

Standard MANOSKOP® 721• cut-out type• rapid setting • dual stop signal• twin scales N m/ft.lb• the measuring element is only under load while force is being applied, no need for manual reset to zero• any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g.forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.

• all the sensitive components are protected by the sturdy tubular steel housing• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.


Torque wrenches with reversible ratchet721

‘

D b1 b2 h1 h2 L LF RCode size W W X X '' mm mm mm mm mm mm g €‘

50200005 5 6–50 N m 5–36 ft.lb 2 N m 1 ft.lb 3/8 28 27.5 23 14.5 352 293 900 253.0050200015 15 30–150 N m 25–110 ft.lb 5 N m 5 ft.lb 1/2 28 41 23 18 452 387 1305 261.0050200030 30 60–300 N m 50–220 ft.lb 10 N m 10 ft.lb 1/2 28 44 23 27.5 553 486 1720 313.00‘

size 30 with push through square drive (spare square drive, refer to page 183)‘

Standard MANOSKOP® 720Nf • cut-out type• easy setting• dual stop signal• twin scales N m/ft.lb• anticlockwise torquing thanks to swap-over square drive• all the sensitive components are protected by the sturdy tubular steel housing in the U-shaped aluminiumprofile



5

169

i BITS1299for inside hexagon screws, for operating the adjusting screws on torque wrenches No 720, 721, 730 and 730N.

‘

B outside L RCode mm E '' mm g S €‘

08090002 2 C 6.3 1/4 34 4 10 3.10‘


Standard MANOSKOP® 721Nf• cut-out type• easy setting• dual stop signal• twin scales N m/ft.lb• anticlockwise torquing thanks to swap-over square drive• all the sensitive components are protected by the sturdy tubular steel housing in the U-shaped aluminiumprofile



Torque wrenches with ratchet721Nf

‘

D b1 b2 h L LF RCode size W W X X '' mm mm mm mm mm g €‘

50200081 80 160–800 N m 120–600 ft.lb 20 N m 20 ft.lb 3/4 46.5 76 42 1051 938 7222 980.0096502001 100 200–1000 N m 150–725 ft.lb 25 N m 25 ft.lb 3/4 46.5 76 42 1504 1365 7005 1166.50‘

721Nf/80

721Nf/100

176 182–

Torque tools

5

170

Industrial MANOSKOP® 755• For work on production lines or series production. No setting scale; have to be set with a testersuch as the STAHLWILLE No 7707 W tester or the No 7794, No 7706 calibration system.

• cut-out type• mount for interchangeable insert tools• dual stop signal• particularly light and easy to handle• handle and shank are made of square tubular steel• any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function (up tothe max. of the wrench’s range) does not act on the trigger mechanism and cannot cause damage to it.

• anticlockwise torquing thanks to swap-over insert tools• with preset cut-out value on request (price on application)• display deviation value ± 4%

Industrial MANOSKOP®755R/1Torque wrench with built-in ratchet, irrespective of the point of application of force, dual stop signal and cut-out. Deviation of indication ± 4%. Cut-out setting with aid of Setting Gauge.

‘

D b h L RCode W W '' mm mm mm g €‘

50100001 1.5–12.5 N m 1.0–9.0 ft.lb 1/4 22 18 173.5 335 171.00‘

Basic wrenches with tool carrier for insert tool755

‘

J b h L LF SF RCode size W W mm mm mm mm mm mm g €‘

50010004 4 4–40 N m 4–30 ft.lb ; 22 18 201 172 17.5 522 107.0050010010 10 20–100 N m 15–74 ft.lb ; 28 24 318 289 17.5 635 114.0050010020 20 40–200 N m 30–147 ft.lb , 28 24 457 435 25 1060 128.0050010030 30 60–300 N m 40–220 ft.lb , 28 24 609 587 25 1210 136.00‘

Inlays for plastic case‘

for torque wrenches RCode No g €‘

83071004 712R/6; 713R/6; 721/5; 721/15; 730/5; 730/10; 730/12; 730/20; 730a/5; 730a/10; 730a/12; 730a/20; 730N/5; 730N/10; 730N/12; 730N/20; 730Na/5; 730Na/10; 730Na/20; 730D/10 88 4.45

83071002 713R/20; 721/30; 730/40; 730N/40; 730Na/40; 730D/20 113 6.80

‘

Plastic case, emptyfor safe storage and transport oftorque wrenches (please orderinlays separately). Supplied without torque wrench.

‘

for torque wrenches L RCode No No mm g €‘

81370002 7301 712R/6; 713R/6; 721/5; 721/15; 730/5; 730/10; 730/12; 730/20; 730a/5; 730a/10; 730a/12; 730a/20; 730N/5; 730N/10; 730N/12; 730N/20; 730Na/5; 730Na/10; 730Na/20; 730D/10 550 425 15.40

81370003 7302 713R/20; 721/30; 730/40; 730N/40; 730Na/40; 730D/20 680 535 17.50

‘

176 182–

5

171

Electronic angle-controlled torque wrenches Sensotork®713RÜü

‘

D J b h L R R gCode size W W '' mm mm mm mm g with box €‘

96501606 6 3–60 N m 2.5–44 ft.lb 3/8 ; 50 33.5 378 856 1500 1194.0096501620 20 10–200 N m 7–148 ft.lb 1/2 , 50 33.5 608 1552 2430 1264.0096501640 40 20–400 N m 15–296 ft.lb 3/4 , 50 33.5 838 2332 5555 1386.00‘

Electronic torque wrench Sensotork 712®

Electronic torque wrench Sensotork®712R/6

ÜüElectronic torque wrench with option of attaching interchangeable insert tools, same design as No 713 but without angle function.

‘

D J b h L R R gCode W W '' mm mm mm mm g with box €‘

96501506 3–60 N m 2.5–44 ft.lb 3/8 ; 50 33.5 378 856 1500 1016.00‘

Indicating torque wrenchesElectronic angle-controlled torque wrench Sensotork® 713• simple, flexible operation thanks to operator guidance on large-format display• very broad measuring range (5% to 100% of rated value)• supplied with insert tool reversible ratchet, more insert tools• QuickRelease safety lock• for clockwise and anticlockwise torquing• measurements independent of the point of application of force (sizes 6 and 20)• units of measurement: N m, ft.lb, in.lb• advance warning points programmable for visual, tactile and acoustic signals• torque and angle are simultaneously visible• convenient angle measurement across a very wide angle range without a reference arm• insert tool lengths can be individually set• maintenance friendly due to easy adjustment and automatic reminder of next calibration date• repeated joints can be collated to form a single menu-guided sequence• individual identification markings possible• password protection to prevent inadvertent changes and make the tool tamper-proof • meets requirements of DKD-R 3-7, Class 2 • works certificate in accordance with DIN EN 10204• in sturdy plastic case (size 40 in tough steel case)• supplied with three 1.5 V AA batteries. AA/LR6, 1.2 V NiMH rechargeable cells may also be used.• fully automated calibration (torque) using perfectControl calibrating unit No 7794-2. Adjustment without disassembly.

• display deviation value for angle ± 1%• display deviation value ± 1%

176 182–

Torque tools

5

172

Accessories for electronic angle-controlled torque wrench Sensotork® No 713and electronic torque wrench Sensotork® No 712

USB adaptor, jack cable and software Sensomaster for No 712R, 713R7759-1for documenting and managing readings on a PC and carrying out statistical analyses.• Read out stored wrench data and joint readings: Joint identifier, Tool serial number, Target torque or target angle, Torque level at which the tool cuts out,Tightening torque or angle reached, Tolerances, Joint evaluation

• Storage of joint data in a database• Delete or print highlighted joints from thedatabase

• Export displayed joint data to a CSV file(compatible with Excel)

• 13 languages• User management• Define new PIN• Delete joint data stored in wrench

System requirements:• PC• Microsoft Windows 98 SE or compatibleoperating system with USB support

• USB connection• Installed ODBC driver for Access data

‘

L RCode m g €‘

96583625 1.5 137 120.40‘

MANOSKOP® 71 with integrated force compensator71/80

‘

K b h L LF SF RCode W W X X mm mm mm mm mm mm g €‘

50030080 160–800 N m 120–600 ft.lb 10 N m 10 ft.lb 28 24 1048 1050 95 2360 876.00‘

MANOSKOP® 71• indicating type• mount for interchangeable shell tools• all 14 x 18 mm insert tools can also be used with insert tool adaptor No 7370/80 (max. 650 N m)• trailing pointer dial• twin scales N m/ft.lb• scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions• handle with integrated force compensator• measuring element is a bending plate housed in the handle• with overload protection• can be applied for either clockwise or anticlockwise tightening by turning the wrench over• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.


24.5x28

5

173

MANOSKOP® 71 with permanently installed reversible ratchet• indicating type• trailing pointer dial• twin scales N m/ft.lb• scale is made of luminescent light yellow special film enabling clear readings even in poor light conditions• additional protection for the gauge by the protective ring• not for anticlockwise measurement• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.


MANOSKOP® 71 with integrated force compensator71aR/80

‘

D b h L LF RCode W W X X '' mm mm mm mm g €‘

50450080 100–600 ft.lb 160–800 N m 10 ft.lb 10 N m 3/4 70 30 1152 1060 4280 1028.00‘

Friction gauge• indicating type• permanently installed square drive• trailing pointer dial• no “needle wobble” during measurements• lighter construction due to use of aluminium• with certificate• display deviation value ± 4%

Friction gauge73Nm/15

‘

D b h L LF SF RCode W X '' mm mm mm mm mm g €‘

50240015 2–15 N m 0.5 N m 1/2 72 50 298.5 250 0 775 350.00‘

Torque tools

5

174

Torque screwdrivers TORSIOMAX 775• cut-out type• for torque-controlled bolt tightening in the cN m and in.lb ranges• for one-off or production runs• measuring element is a screw compression spring • anticlockwise and clockwise tightening• with 1/4'' internal hex drive (F 6.3 DIN 3126/ISO1173)• infinitely variable via micrometer scale (twist scale)• disengaging clutch coupling prevents the preset value being exceeded• the shape of the handle and its surface texture ensure safe and accurate transmission of torque• insert tools: For all 1/4'' hex E 6.3, Phillips-head screws, POZIDRIV / SUPADRIV®, straight-slot, TORX®, hex BITS (see pp. 153, 154). For very small joints, BITS with a 4 mm hex drive and an adapter No 3115/2 forBITS screwdriver inserts, Type C4, and external hex 1/4'' (E 6.3 DIN 3126/ISO 1173) are required (refer topages 148, 151).

• display deviation value ± 6%

Torque screwdriver TORSIOMAX775

‘

inside L RCode size W X b mm g €‘

51060003 31) 2–30 cN m 0.2 cN m F 6.3 105 210 224.0051060012 122) 20–120 cN m 1 cN m F 6.3 157 195 228.0051060030 302) 40–300 cN m 1 cN m F 6.3 160 215 265.0051060050 502) 100–500 cN m 2.5 cN m F 6.3 205 455 272.001

51060100 1003) 400–1000 cN m 5 cN m F 6.3 235 770 417.0051460003 a/31) 0.2–3 in.lb 0.02 in.lb F 6.3 105 210 242.0051460012 a/122) 2–12 in.lb 0.1 in.lb F 6.3 157 350 246.0051460050 a/502) 10–50 in.lb 0.25 in.lb F 6.3 205 606 291.00‘

1) with a swivelling handle-end to improve tool control; and with a clamping screw for locking the preset.2) with an additional locking mechanism to prevent the selected torque being inadvertently adjusted. 3) with screw-on handles for increasing the force applied for large torques.‘

Note!Torque tightening tools are measuring instruments.They must be regularly calibrated with suitable instruments and adjusted accordingly (see DIN EN ISO 6789, 5.3 Recalibrating).‘

775/3

775/30 775/50 775/100

775/12

5

175

TORSIOMETER 760• indicating type• the measuring element is a torsional leaf spring• clockwise tightening (with trailing pointer) and anticlockwise tightening• with 1/4'' internal hex drive (F 6.3 DIN 3126)• comparative scale in in.lb and cursor• inserts and adaptors with external hex E 6.3 (1/4'') DIN 3126/ISO 1173 are securely held and firmly controlledin the mounting shaft (for BITS screwdriver inserts, refer to pages 153, 154).

• to attach 1/4'' sockets, please order adaptor No 3115 (refer to page 152).• display deviation value ± 4%

Torque screwdrivers TORSIOMETER760

‘

inside L RCode size W W X b mm g €‘

51040007 7.5 15–75 cN m 1.5–6.5 in.lb 2.5 cN m F 6.3 185 225 217.0051040015 15 30–150 cN m 3–13 in.lb 5 cN m F 6.3 185 225 229.0051040030 30 60–300 cN m 6–26 in.lb 10 cN m F 6.3 185 230 222.0051040060 60 120–600 cN m 12–52 in.lb 20 cN m F 6.3 185 230 231.00‘

5

176

Which insert tool for which torque wrench?

730 Service MANOSKOP®, cut-out

755 Industrial MANOSKOP®, cut-out

730N Service MANOSKOP®, cut-out

730D Service/Industrial MANOSKOP®, cut-out, indicating

71 Torque Wrench MANOSKOP®, indicating

713R Electronic angle-controlled Torque Wrench Sensotork®, indicating

736/10

�

�

�

�

�

736/40

�

�

�

�

�

737/10

�

�

�

�

�

737/40

�

�

�

�

�

731/80

�

731/10

�

�

�

�

�

734L/5

�

�

�

�

�

734F

�

�

�

�

�

731/40

�

�

�

�

�

732/10

�

�

�

�

�

732/40

�

�

�

�

�

732/80

�

732G/10

�

�

�

�

�

732TX/10

�

�

�

�

�

732TX/40

�

�

�

�

�

733/10

�

�

�

�

�

sizea/20a/40a/50

–a/10a/12a/20

–a/40

––

size0204050610122030406580

725QR/4

�

�

�

�

725QR/5

�

�

�

�

�

725QR/10

�

�

�

�

�

725QR/20

�

�

�

725B

�

�

�

�

725L/5

�

�

�

�

�

725/4

�

�

�

�

735/5

�

�

�

�

�

735/10

�

�

�

�

�

735/20

�

�

735/40

�

�

�

�

735/65

�

�

�

�

�

734/4

�

�

�

�

734/5

�

�

�

�

�

734/10

�

�

�

�

�

734/20

�

�

�

734/40

�

�

�

�

�

734/80

�

735/80

�

No

D

D

D

D

D

C

C

C

C

C

mm

sizea/20a/40a/50

–a/10a/12a/20

–a/40

––

size0204050610122030406580

No

D

D

D

D

D

C

C

C

C

C

mm

24.5x28

24.5x28

MANOSKOP 730DBGM GERMANY

klick Nr. 730/56-50 Nm5-35 ft. lb

10105

2Nmft. lbNmft. lb

40 60 80

30 400 50 60 10

5

177

Insert/shell toolsfor torque wrenchesOutput square drive D in accordance with DIN 3120

QuickRelease ratchet insert tool725QR

Üüreversible, with QuickRelease safety lock, size 4: 22 teeth, sizes 5 and 10: 30 teeth, size 20: 36 teeth.

‘

D J b h S RCode size '' mm mm mm mm g €‘

58253004 4 1/4 ; 22 14.5 17.5 60 76.0058253005 5 3/8 ; 29 14.5 28* 130 77.5058253010 10 1/2 ; 29 14.5 28* 141 79.5058253020 20 1/2 , 41 18 38.5* 325 85.50‘

* Caution! Modified settings on torque wrench (refer to note on page 196).‘

Bit ratchet insert tool725Breversible, with inside hexagon, 1/4'' or 5/16'', DIN 3126/ISO 1173 D 6.3 or D8,for direct acceptance of bits 1/4'' or 5/16'' outside hexagon C 6.3 (size 4: 22 teeth, size 5: 30 teeth). Internal hex drive with a collar-thrustspring (registered design). Bits are easy to insert, lock securely in positionand can be removed just as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173). Supplied without bits.

‘


58255004 4 1/4 ; 22 14 17.5 54 58.0058255005 5 5/16 ; 29 14.5 28* 117 78.50‘


Ratchet insert tool725L/5reversible, 30 teeth.Caution! Modified settings on torque wrench (refer to note on p. 196).This ratchet insert tool has the same extension length as ring insert toolNo 732G/10 (see p. 180) and square drive insert tool No 734L/5 (see p. 178).

‘

D J b h S RCode '' mm mm mm mm g €‘

58151005 3/8 ; 27.5 14.5 45 164 85.00‘

reversible, 22 teeth.

‘


58254004 1/4 ; 22 14.5 17.5 62 59.00‘

Ratchet insert tools, fine tooth735reversible, 60 teeth.

‘


58250005 5 3/8 ; 33 24 17.5 155 62.0058250010 10 1/2 ; 33 24 17.5 147 64.0058250020 20 1/2 , 43 26 25 302 68.0058250040 40 3/4 , 50 32 25 510 101.001

58250065** 65 U 3/4 , 58 36 30* 701 117.00‘

* Caution! Modified settings on torque wrench (refer to note on page 196).** available from spring 2012‘

Ratchet shell tool735/80with push through square drive, 30 teeth.

‘

D K b h S RCode '' mm mm mm mm g €‘

58250080 3/4 76 43 95 2000 356.00‘

Ratchet insert tool725/4

24.5x28

Insert/shell tools

5

178

Square drive insert tools734

‘


58240004 4 1/4 ; 20 14 17.5 71 24.5058240005 5 3/8 ; 20 14 17.5 76 24.5058240010 10 1/2 ; 20 14 17.5 82 25.2058240020 20 1/2 , 27 18 25 203 27.301

58240040 40 3/4 , 40 25 25 396 45.10‘

Square drive shell tool734/80

‘

D K b h S RCode '' mm mm mm mm g €‘

58240080 3/4 : 42 42 95 1200 146.00‘

Square drive insert tools734Fwith permanently attached, captive square drive.

‘


58241004 4 1/4 ; 22 14 17.5 72 31.9058241005 5 3/8 ; 22 14 17.5 75 31.90‘

Square drive insert tool734L/5Caution! Modified settings on torque wrench (refer to note on p. 196). Thissquare-drive insert tool has the same extension length as ring insert toolNo 732G/10 (see p. 180) and ratchet insert tool No 725L/5 (see p. 177).

‘


58242005 3/8 ; 20 14 45 141 54.50‘

Open ended insert tools731/10

‘

A J b h S RCode mm mm mm mm mm g €‘

58211007 7 ; 22 5 17.5 40 28.4058211008 8 ; 22 5 17.5 39 27.1058211009 9 ; 26 5.5 17.5 38 28.4058211010 10 ; 26 5.5 17.5 42 26.401

58211011 11 ; 26 5.5 17.5 41 26.4058211012 12 1) ; 30 7 17.5 43 27.1058211013 13 ; 30 7 17.5 48 26.4058211014 14 ; 35 8 17.5 52 26.401

58211015 15 ; 35 8 17.5 51 26.4058211016 16 ; 38 8.5 17.5 58 26.4058211017 17 ; 38 8.5 17.5 60 26.4058211018 18 ; 42 9 20* 71 26.401

58211019 19 ; 42 9 20* 74 26.40‘

1) For flare nuts of hydraulic pipes on French vehicles‘

Open ended insert tools731a/10‘

A J b h S RCode '' mm mm mm mm g €‘

58611016 1/4 ; 22 5 17.5 36 28.4058611020 5/16 ; 22 5 17.5 53 28.4058611024 3/8 ; 26 5.5 17.5 38 28.4058611028 7/16 ; 26 5.5 17.5 37 28.401

58611032 1/2 ; 30 7 17.5 44 28.4058611034 9/16 ; 35 8 17.5 49 28.4058611036 5/8 ; 38 8.5 17.5 64 28.4058611038 11/16 ; 42 9 20* 76 28.401

58611040 3/4 ; 42 9 20* 73 28.40‘

Open ended insert tools731/40

‘


58214013 13 , 30 7 25 128 30.2058214014 14 , 35 8 25 129 30.2058214015 15 , 35 8 25 132 32.6058214016 16 , 38 9 25 140 30.201

58214017 17 , 38 9 25 136 30.2058214018 18 , 42 10 25 147 30.2058214019 19 , 42 10 25 145 30.2058214021 21 , 50 11 25 171 36.601

58214022 22 , 50 11 25 165 36.6058214024 24 , 53 12 25 167 36.6058214025 25 , 53 12 25 170 39.2058214027 27 , 60 13 30* 219 36.601

58214030 30 , 66 14 30* 245 41.0058214032 32 , 66 14 32.5* 246 41.0058214034 34 , 66 14 32.5* 239 44.1058214036 36 , 74 15 32.5* 275 42.801

58214038 38 , 74 15 32.5* 265 44.0058214041 41 , 82 15 36.5* 307 46.10‘


5

179

Open ended insert tools731a/40‘


58614028 7/16 , 30 7 25 127 33.4058614032 1/2 , 30 7 25 125 33.4058614034 9/16 , 35 8 25 129 33.4058614036 5/8 , 38 9 25 136 33.401

58614038 11/16 , 42 10 25 148 33.4058614040 3/4 , 42 10 25 144 33.4058614042 13/16 , 50 11 25 171 39.3058614044 7/8 , 50 11 25 165 39.301

58614046 15/16 , 53 12 25 177 39.3058614048 1 , 60 13 30* 224 39.3058614052 1 1/8 , 66 14 30* 258 39.30‘


Open ended shell tools731/80

‘

A K b h S RCode mm mm mm mm mm g €‘

58218024 24 50 13 95 601 145.0058218027 27 56 14 95 620 145.0058218030 30 63 15 95 655 147.0058218032 32 67 15 95 670 147.001

58218034 34 72 15 95 699 147.0058218036 36 74 15 95 740 151.0058218041 41 84 16 95 810 151.0058218046 46 94 17 95 867 154.001

58218050 50 104 18 95 1010 157.0058218055 55 114 19 95 1150 162.0058218060 60 124 20 95 1330 165.00‘

Ring insert tools732/10

P

‘


58221007 7 ; 13 8 17.5 37 29.4058221008 8 ; 14.2 8 17.5 40 28.6058221010 10 ; 17.2 9 17.5 44 28.0058221011 11 ; 18.5 9 17.5 41 29.401

58221012 12 ; 20.5 11 17.5 49 29.4058221013 13 ; 21.5 11 17.5 55 28.0058221014 14 ; 22.5 11 17.5 52 29.4058221015 15 ; 24.5 12 17.5 52 28.601

58221016 16 ; 26 12 17.5 54 28.0058221017 17 ; 27 13 17.5 59 28.0058221018 18 ; 28 13 17.5 56 28.0058221019 19 ; 30.5 13 17.5 65 28.001

58221021 21 ; 33 15 17.5 71 29.4058221022 22 ; 34.5 15 17.5 74 28.00‘

Ring insert tools732a/10

P‘


58621016 1/4 ; 13 8 17.5 36 29.2058621020 5/16 ; 14.2 8 17.5 37 29.2058621024 3/8 1) ; 17.2 9 17.5 37 29.2058621028 7/16 ; 18.5 9 17.5 40 29.201

58621032 1/2 ; 21.5 11 17.5 53 29.2058621034 9/16 ; 22.5 11 17.5 52 29.2058621036 5/8 ; 26 12 17.5 54 29.2058621038 11/16 ; 28 13 17.5 58 29.201

58621040 3/4 ; 30.5 13 17.5 58 29.2058621042 13/16 ; 33 15 17.5 68 30.8058621044 7/8 ; 34.5 15 17.5 69 30.80‘

1) For Volvo aero-engines, types ''JAS''‘


P

‘


58224013 13 , 22.5 11 25 130 31.1058224014 14 , 23 11 25 123 31.1058224015 15 , 24 11 25 128 31.7058224016 16 , 25.5 12 25 133 31.101

58224017 17 , 27 12 25 135 31.1058224018 18 , 29 13 25 134 31.1058224019 19 , 30.5 13 25 138 31.1058224021 21 , 33 15 25 144 37.001

58224022 22 , 34.5 15 25 145 37.0058224024 24 , 37.5 15 25 153 37.0058224027 27 , 42.5 17 25 162 37.0058224028 28 , 45.5 19 25 175 44.001

58224030 30 , 46 19 25 182 41.8058224032 32 , 47.5 19 25 181 41.8058224034 34 , 52 19 28* 210 44.0058224036 36 , 54 19 28* 203 41.801

58224041 41 , 60 20 30* 240 41.80‘


Ring insert tools732a/40

P‘


58624032 1/2 , 22.5 11 25 122 35.8058624034 9/16 , 23 11 25 122 34.2058624036 5/8 , 25.5 12 25 134 34.2058624038 11/16 , 29 13 25 132 34.201

58624040 3/4 , 30.5 13 25 138 34.2058624042 13/16 , 33 15 25 142 40.8058624044 7/8 , 34.5 15 25 147 40.8058624046 15/16 , 37.5 15 25 151 40.801

58624048 1 , 41 17 25 160 40.80‘

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

Insert/shell tools

5

180

Ring insert tools732G/10

P QCaution! Modified settings on torque wrench (refer to note on p. 196). This insert tool has the same extension length as insert tool No 725L/5(see p. 177) and square-drive insert tool No 734L/5 (see p. 178); HPQ high performance steel, gunmetal finish.

‘


58620007 7 ; 11.5 6 45 31 27.6058620008 8 ; 12.4 6 45 33 27.6058620009 9 ; 14 8 45 40 27.6058620010 10 ; 15.6 8 45 44 27.601

58620013 13 ; 19.3 9.2 45 60 28.50‘

Ring insert tools732aG/10

P QCaution! Modified settings on torque wrench (refer to note on p. 196). This insert tool has the same extension length as insert tool No 725L/5(see p. 177) and square-drive insert tool No 734L/5 (see p. 178); HPQ high performance steel, gunmetal finish.

‘


58621216 1/4 ; 10.4 6 45 28 29.0058621220 5/16 ; 12.4 6 45 31 29.0058621224 3/8 ; 14.9 8 45 42 29.0058621228 7/16 ; 17 8 45 43 29.901

58621232 1/2 ; 19 9.2 45 58 29.9058621234 9/16 ; 21 9.2 45 58 27.2058621236 5/8 ; 23 12 45 74 29.90‘

for assembling and dismantling aero-engines.‘

Ring shell tools732/80

P

‘

A K b h S RCode mm mm mm mm mm g €‘

58228024 24 36 15 95 605 148.0058228027 27 40.5 15 95 610 148.0058228030 30 46 16 95 630 152.0058228032 32 49 16 95 635 152.001

58228034 34 52 17 95 650 152.0058228036 36 54 17 95 650 155.0058228041 41 61 18 95 675 162.0058228046 46 66 19 95 720 158.001

58228050 50 75 20 95 803 158.0058228055 55 84 21 95 889 160.0058228060 60 93 22 95 995 160.00‘

Ring shell tools732a/80

P‘

A K b h S RCode '' mm mm mm mm g €‘

58628046 15/16 1) 36 14 95 604 165.0058628050 1 1/16 1) 40.5 14 95 608 165.00‘

1) for jet engine pins (Airbus A320/A321)‘

TORX® insert tools732TX/10

‘

J b h S RCode size mm mm mm mm g €‘

58291006 E6 ; 13 8 17.5 40 28.0058291008 E8 ; 14.2 8 17.5 45 28.0058291010 E10 ; 17.2 9 17.5 45 28.0058291012 E12 ; 18.5 9 17.5 50 28.001

58291014 E14 ; 21.5 11 17.5 60 28.00‘

TORX® insert tools732TX/40

‘

J b h S RCode size mm mm mm mm g €‘

58294014 E14 , 22.5 11 25 130 37.0058294018 E18 , 24 11 25 135 37.0058294020 E20 , 29 13 25 150 37.0058294024 E24 , 30.5 13 25 150 41.80‘

Open ring insert tools733/10

P

‘

A J b h W S RCode mm mm mm mm mm mm g €‘

58231010 10 ; 21.5 11 7.1 17.5 57 30.3058231011 11 ; 22.5 11 8.6 17.5 55 30.3058231012 12 ; 24.5 12 9 17.5 59 30.3058231013 13 ; 26 12 10 17.5 55 30.301

58231014 14 ; 27 13 11 17.5 60 30.3058231016 16 ; 30.5 13 13 17.5 65 31.3058231017 17 ; 31.5 13 14 17.5 64 30.3058231018 18 ; 33 15 14.8 17.5 74 31.301

58231019 19 ; 34 15 15.8 17.5 80 30.3058231021 21 ; 38.5 15 16.2 20* 88 31.3058231022 22 ; 39.5 15 17 20* 92 30.3058231024 24 ; 40 15 18 20* 75 30.30‘


24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

24.5x28

5

181

Open ring insert tools733a/10

P‘

A J b h W S RCode '' mm mm mm mm mm g €‘

58631024 3/8 ; 21.5 11 7.1 17.5 55 32.8058631028 7/16 ; 22.5 11 8.6 17.5 56 32.8058631032 1/2 ; 26 12 9.5 17.5 58 32.8058631034 9/16 ; 27.5 13 11 17.5 59 32.801

58631036 5/8 ; 30.5 13 12.7 17.5 61 32.8058631038 11/16 ; 33 15 14 17.5 48 33.7058631040 3/4 ; 34 15 15.8 17.5 76 33.70‘

BIT holder insert tools736Internal hex drive with a collar-thrust spring (registered design). Bits are easy to insert, lock securely in position and can be removed justas easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

‘


58261010 10 D 8 5/16 ; 16 12.5 17.5 47 28.5058262610 10-1 D 6.3 1/4 ; 14 10 17.5 45 29.0058261040 40 D 8 5/16 , 16 12.5 25 112 38.90‘


Blank end insert tools737gunmetal finish. To prevent damage from excessive temperatures, thelocking pin, spring and washer are not fitted until the welding work hasbeen completed. Instructions are supplied.

‘

Welding surface J H L RCode size h x b mm mm mm mm g €‘

58270010 10 8 x 14 ; 14.5 8 35 21.5058270040 40 11 x 25 , 21.5 12 98 27.00‘

Adaptor7370/10

Üüfor using insert tools with an outer square drive of 14 x 18 mm on torquewrenches with an internal square drive of 9 x 12 mm.Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D a b h S RCode mm mm mm mm mm g €‘

58290010 ; , 31 26 30.5 114 45.40‘

Adaptor7370/40

Üüfor using insert tools with an outer square drive of 9 x 12 mm on torquewrenches with an internal square drive of 14 x 18 mm.Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D a b h S RCode mm mm mm mm mm g €‘

58290040 , ; 28 21 21.5 115 72.50‘

Adaptor7370/10-2for use with insert tools with a lateral dovetail profile in torque wrencheswith 9 x 12 mm internal square drives. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D b h S RCode mm mm mm mm g €‘

58290012 ; 23.5 9.5 24 51 55.50‘

Adaptor7370/40-2for use with insert tools with a lateral dovetail profile in torque wrencheswith 14 x 18 mm internal square drives. Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D b h S RCode mm mm mm mm g €‘

58290042 , 31.5 9.5 34.6 138 62.00‘

Insert/shell tools

5

182

Adaptor7370/40-1for using shell tools with an internal square drive of 24.5 x 28 mm ontorque wrenches with an internal square drive of 14 x 18 mm.Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

D D b h RCode mm mm mm mm g €‘

58290041 , 28 24 251 54.50‘

Shell adaptor7370/80for attaching 14 x 18 mm insert tools.Caution! Modified settings on torque wrench (refer to note on p. 196).

‘

a a b h S RCode mm mm mm mm mm g €‘

58290080 , 36 26 70 281 145.00‘

Tool holderwith tool carrier to receiveinsert tools (without torque function).

‘

J L RCode No mm mm g €‘

18200001 1820 ; 382.5 490 45.4018210001 1821 , 575 720 58.50‘

Torque angle gauges7380N/7385Nregistered design, for angle controlled bolt/screw tightening, with staticread-off point. Read-off possible from any angle thanks to a pair of angledscales. Removable magnet for attaching sockets with 1/2'' internal squaredrive. For use in conjunction with tightening tools such as ServiceMANOSKOP® No 730N. Since this tightening method requires a pre-determined snug torque to be applied, it is essential to choose atorque wrench covering both snug torque as well as maximum torquerequired to reach the recommended tightening angle. Whether 1/2'' or 3/4''sq.dr. Torque Angle Gauge is used depends upon the square drive of theappropriate torque wrench employed.

‘

a D b h L RCode No '' '' W X mm mm mm g €‘

54010001 7380N 1/2 1/2 ± 360° 2° 78 43 416 494 108.0054010002 7385N 3/4 3/4 ± 360° 2° 78 76 416 720 139.00‘

Ratchet spare parts sets for torque wrenches 721/5–80‘

RCode No Content g €‘

59191005 7210/5 For ratchet/torque wrench No 721/5:1 pinion, 1 pawl, 1 switch-over button and pin, 1 ball, 2 compression springs, 2 screws 53 24.40

19040000 5120 + 7210/15 For ratchet/torque wrench No 721/15:1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws 127 25.80

59191030 7210/30 For ratchet/torque wrench No 721/30:1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws 134 36.10

59191080 7210/80 For ratchet/torque wrench No 721Nf/80, 721Nf/100, 735/80:1 pinion, 2 pawls, 2 spring contact points, 2 compression springs 448 132.00

‘

Torque wrench set730R/40/3232 pieces, in steel case, for generalservice work.Content:1 SERVICE-MANOSKOP®

No 730/40, 80–400 N m1 ratchet insert tool No 735/20,

reversible, 1/2'' D-drive1 square drive insert tool

No 734/20, 1/2'' D-drive7 o/e insert tools No 731/40,

sizes 13, 15, 17, 19, 22, 27, 30 mm1 No 3731/40 size 24 mm;7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm

10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 25, 30,32 mm

4 accessories, 1/2'' a-drive:1 T-handle No 5061 extension 255 mm No 509/101 extension 130 mm No 509/51 extension 55 mm No 509/2

‘

RCode g S €‘

96502053 9739 1 1235.20‘

24.5x28

24.5x28

5

183

Sets of spare parts for ratchet inserttools No 725QR, No 735

Spare parts set4150QR

ÜüContent:1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws M 1.7 x 8; 1 cover plate

‘

RCode for No g S €‘

19011020 725QR/4 24 1 27.70‘


ÜüContent:1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

‘


19020020 725QR/5 51 1 27.70‘

Spare parts set7250QR/10


‘


19041020 725QR/10 64 1 27.10‘



‘


19040020 725QR/20 127 1 28.60‘

Set of spare parts7350/5Content:1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

‘


59251005 735/5 85 1 26.20‘



‘


59251010 735/10 96 1 28.80‘



‘


59251020 735/20 146 1 28.70‘



‘


59251040 735/40 219 1 35.40‘


Square drive units70Vfor torque wrenches and insert tools.

‘

a b L RCode size for No '' '' mm g S €‘

59010001 1 71...V/1 1/4 1/4 17.5 5 5 11.3059010014 11 734/4 3/8 1/4 22 12 5 12.4059010003 3 734/5 3/8 3/8 25.8 17 5 9.6559010005 5 734/10 3/8 1/2 30 28 5 11.701

59010011 502 1/2 720/30; 734/20 1/2 1/2 33.5 39 5 7.2559010007 7 721/30 1/2 1/2 44.3 52 5 9.1559010008 8 734/40 3/4 3/4 52.2 138 5 17.8059010015 12 720Nf/80; 721Nf/80+100 3/4 3/4 65 179 1 18.70‘

Calibrating square drive units70VKWithout a ball or pin. Optimum measuring results during calibration thanksto reduced lateral forces.

‘

a b L RCode size for No '' '' mm g S €‘

59011014 11 734/4 3/8 1/4 24.7 15 5 12.4059011003 3 734/5 3/8 3/8 27.6 20 5 9.6559011011 502 1/2 734/20 1/2 1/2 36.9 60 5 7.2559011008 8 734/40 3/4 3/4 52.2 147 5 17.80‘

MP300-5050

MP300-2000 MP300-3000

Torque tools

5

184

MULTIPOWERMakes child’s play of the largest torques.Multipower – or really “tough work”.STAHLWILLE Multipower torque multipliers with planetary gears take the fatigue out of tightening orloosening stiff or large bolt connections. A long lever is not necessary.STAHLWILLE Multipower multiplies human strength; steady torque transfer is easy on nuts and bolts. Even the largest torques are transferred with ease and precision over long periods.Accordingly, construction materials and workmanship are extremely robust.When combined with STAHLWILLE torque wrenches, Multipower really shows its strength.The Multipower range extends to 5000 N m/3687 ft.lb. Multipower tools are also available on request up to 12000 N m/8850 ft.lb.The Multipower from 2000 N m are fitted with an anti-backlash device.

MULTIPOWERwith overload protection and planetary gears, in carrying case, with spare hex. for overload device, deviation of indication ± 5%.

‘

Gear Torque a D b h L R R gCode No N m1) ft.lb1) N m2) ft.lb2) ratio ratio '' '' mm mm mm g with box €‘

53030800 MP300-800 800 590 229 169 4 : 1 1 : 3.5 1/2 3/4 66 85 215 2000 5838 641.0053031350 MP300-1350 1350 996 375 277 4 : 1 1 : 3.6 3/4 3/4 90 106 265 3400 7500 936.0053032000 MP300-2000*) 2000 1475 160 118 16 : 1 1 : 12.5 1/2 1 95 161 330 7000 11000 2278.0053033000 MP300-3000*) 3000 2212 240 177 16 : 1 1 : 12.5 3/4 1 95 161 330 7000 10805 2700.001

53035000 MP300-5000*) 5000 3687 294 217 20 : 1 1 : 17.0 3/4 1 1/2 120 180 400 10400 14000 3829.00‘

Multipower tools are also available on request up to 12000 N m/8850 ft.lb.*) with anti-backlash device1) max. output2) max. input‘

MP300-800 MP300-1350

Spares for Multipower

Sun wheel with overload cutout

‘

RCode No for No g €‘

59030800 SR300-800 MP300-800 45 116.0059031350 SR300-1350 MP300-1350 106 116.0059032000 SR300-2000 MP300-2000 120 116.0059033000 SR300-3000 MP300-3000 130 116.0059035000 SR300-5000 MP300-5000 127 116.0059300039 SR290N STW 290N 41 116.0059300067 SR295N STW 295N 95 116.0059300068 SR391N STW 391N 95 116.0059300069 SR392N STW 392N 105 116.0059300070 SR393N STW 393N 105 116.00‘

Replacement square drivesdrilled, for STAHLWILLE Multipower STW 390–STW 393 (until 1996).

‘

RCode No g €‘

59303911 STW 391-700* 89 199.0059303921 STW 392-70 232 168.0059303931 STW 393-70 252 164.00‘

* also for STW 390‘

With STAHLWILLE as your preferred partner

you can ensure controlled tightening, record the results of tightening processes,monitor torque tools.

STAHLWILLE's DAkkS calibration laboratory for

torque is accredited by the German Accreditation

Body in accordance with DIN EN ISO/IEC 17025:

2005.

Which means the specific requirements listed in

Technical Specification ISO/TS 16949 relating to

testing laboratories are met.

Absolutely essential:This is absolutely essential to all suppliers in the

auto motive sector!

The transfer torque wrenches and torque

transducers in use at STAHLWILLE's DAkkS

calibration laboratory are subject to regular

examination by the German Federal Physics

Institute (PTB) in Braunschweig.

The accuracy of the torque wrenches must be

proved in a series of steps and these must be

traceable. Only in this way can the reliability of

the readings be guaranteed.

During the first stage, the enduser checks the

accuracy of the torque tools in-house using

suitable calibrated testing equipment.

During the first stage, the end-user checks the

accuracy of the torque tools in-house using

suitable calibrated testing equipment. At the next

stage, this test equipment is checked in

STAHLWILLE's DAkkS calibrating laboratory.

This accreditation by the German Accreditation

Body (DAkkS) in accordance with DIN EN

ISO/IEC 17025: 2005 guarantees the direct linkbetween the measuring equipment and thenational standard as laid down in DIN EN

ISO 9001: 2008.

Relationship between the national standard and the equipment

185

5

185

Complete calibration systems No: 7794-2/400 7794-2/1100 7794-1/400 7794-1/1100

Code 96 52 10 78 96 52 10 79 96 52 10 76 96 52 10 77Weight/kg 61.9 69.6 53 60.7Range/Nm 0.4–400 0.4 –1100 0.4 –400 0.4–1100

Motorised No 7794-2 No 7794-2 – –calibrating tool

Manual – – No 7794-1 No 7794-1calibrating unit

Extension unit – No 7791-1 – No 7791-1

Transducer* No 7721-1 (0.4–20 Nm) No 7721-1 (0.4–20 Nm) No 7721-1 (0.4–20 Nm) No 7721-1 (0.4–20 Nm)No 7723-2 (8–400 Nm) No 7722 (2–100 Nm) No 7723-2 (8–400 Nm) No 7722 (2–100 Nm)

No 7723-3 (25–1100 Nm) No 7723-3 (25–1100 Nm)

USB Adapter No 7757-1 No 7757-1 No 7757-1 No 7757-1

Jack cable No 7751 No 7751 No 7751 No 7751

Spiral cable No 7752 No 7752 No 7752 No 7752

Square drive adaptor No 409M (1/4” a x 3/8” D) No 409M (1/4” a x 3/8” D) No 409M (1/4” a x 3/8” D) No 409M (1/4” a x 3/8” D)No 7787 (1/4” a x 3/4” D) No 7787 (1/4” a x 3/4” D) No 7787 (1/4” a x 3/4” D) No 7787 (1/4” a x 3/4” D)No 7788 (3/8” a x 3/4” D) No 7788 (3/8” a x 3/4” D) No 7788 (3/8” a x 3/4” D) No 7788 (3/8” a x 3/4” D)No 7789 (1/2” a x 3/4” D) No 7789 (1/2” a x 3/4” D) No 7789 (1/2” a x 3/4” D) No 7789 (1/2” a x 3/4” D)No 7789-4 (1/4” a x 1/2” D) No 7789-4 (1/4” a x 1/2” D) No 7789-4 (1/4” a x 1/2” D) No 7789-4 (1/4” a x 1/2” D)No 7789-5 (3/8” a x 1/2” D) No 7789-5 (3/8” a x 1/2” D) No 7789-5 (3/8” a x 1/2” D) No 7789-5 (3/8” a x 1/2” D)

Calibrating square drive No 734K/4 (1/4” D) No 734K/4 (1/4” D) No 734K/4 (1/4” D) No 734K/4 (1/4” D)insert tools No 734K/5 (3/8” D) No 734K/5 (3/8” D) No 734K/5 (3/8” D) No 734K/5 (3/8” D)

No 734K/20 (1/2” D) No 734K/20 (1/2” D) No 734K/20 (1/2” D) No 734K/20 (1/2” D)No 734K/40 (3/4” D) No 734K/40 (3/4” D) No 734K/40 (3/4” D) No 734K/40 (3/4” D)

Calibration software TORKMASTER TORKMASTER TORKMASTER TORKMASTER

Works calibration 2 3 2 3Certificate

Printer and PC are not included in the delivery.*Transducers can also be used in conjunction with workshop torque tester No 7707 W.

Manualcalibrating unitNo 7794-1

Motorisedcalibrating toolNo 7794-2

Transducer

No 7721-1: 0.4 – 20 NmNo 7722: 2 – 100 NmNo 7723-2: 8 – 400 NmNo 7723-3: 25 – 1100 Nm

USB adapterNo 7757-1

PC –not included in the delivery

Printer –not included in the delivery

� � �Complete calibration systems with matched components

186

5

187

Motorised calibrating and adjusting tool from 0.4 to 400 N m, registered design7794-2The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches.

• measurement possible without moving the point of application of force.• prevents faulty readings thanks to precision-mounted spindle and finely regulated motor.• extremely accurate calibration thanks to optimised bearings and square drives for the transducers.• rapid, easy change of transducers thanks to quick-release latching system.• convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation.• saves time because the bridge support is locked in place using a single-handed eccentric lever.• transmission of readings to a PC via USB interface for further processing, analysis and archiving.• calibration certificates can be printed or saved as a PDF file after calibration.• as found / as left calibrations can be documented.• during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request.• calibration up to 1100 N m is possible using the easily attached extension unit No 7791-1 (see p. 190)Both clicking and indicating torque wrenches can be calibrated. Calibration of transducers is possible using reference torque wrenches No 7770-100 and7770-1000, available on request.4 calibrating square drive insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, software Torkmaster, 1 jack cable No 7751, 1 spiral cable No 7752, 1 low-temperature cable connector, hexagon key wrench No 10760CV size 2 mm are included.The unit is supplied without the torque wrench, transducers or notebook.

‘

Capacity for transducer for torque wrenches with Profile width b h L RCode N m No functional length (LF) max. mm mm mm mm mm kg €‘

96521093 0.4–400 7721-1; 7722; 7723-1; 7723-2; 7723-3 815 180 640 328 1060 57 Price on request‘

7794-2

Manual calibrating unit from 0.4 to 400 N m, registered design7794-1As for perfectControl No 7794-2, but the drive is via an ergonomically designed handwheel.Can be upgraded to perfectControl calibrating unit No 7794-2 with an electric drive.

Calibration up to 1100 N m is possible using the easily attached extension unit No 7791-1 (see p. 190). 4 calibrating square drive insert toolsNo 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1,software Torkmaster, 1 jack cable No 7751, 1 spiral cable No 7752, 1 low-temperature cable connector, hexagon key wrench No 10760CV size 2 mmare included.Supplied without torque wrench, transducer or notebook.

‘


96521092 0.4–400 7721-1; 7722; 7723-1; 7723-2; 7723-3 815 180 705 355 1060 47 Price on request‘

7794-1

��

��

STAHLWILLE as your partner

CalibrationCalibration is the regular examination of the accu racy and reliability of torque tools.

This is done using special-purpose calibratingequipment which is subject to stringent monitoring.

This is essential because torque tools are precision instruments which are very often in usein safety-relevant environments. They are expected to pro vide the same level of accuracy intheir readings reliably over long periods of time.

In order to ensure these standards are guaranteed, it is essential that examination bymeans of calibration takes place at regular intervals and is documented.

2. TransducerThe torque applied using thetorque wrench is digitalised within the transducer and transmitted via USB cable to the PC, which ensures error-free transmission.

1. Mechanical loaderThe mechanical loader is required for rapid, accurate fixing andoperation of the torque wrench. The mechanical loader also ensures that the DIN EN ISO 6789 requirement for clicking torque wrenches is fulfilled, i.e. that, above 80 % of the final torquevalue, the force is applied slowly and steadily within a period of 0.5 to 4 seconds.

3. USB hub and USB cableUp to 5 transducers can beconnected to the USB hub.From here, the data are transferred to the PC.

4. CableYou will require 1 cablefitted with jack plugs for each transducer which is permanently connected up.

6. SoftwareThe data received in this way can then be used to issue a calibration certificate in accordance with DIN/ISO 6789.

5. Square drive adapterThe set includes the squaredrive adapters necessary tomake full use of the measuringrange of the transducers; e.g. for transducer No 7723-3(internal square drive 3/4”),square drive adapter No 7787 (1/4” female to 3/4” male), No 7788 (3/8” female to 3/4” male) and No 7789 (1/2” female to 3/4” male).

2.

3.

5.

At the very least, a calibration system must includethe following components.

1.

4.

6.

Complete calibration systems with matched components

Complete calibration systems No: 7706-8 PC 7706-9 PC 7706-10 PC 7706-11 PC

Code 96 52 10 68 96 52 10 69 96 52 10 70 96 52 10 74Weight/kg 14.2 67.6 70.6 108.4Range/Nm 0.2–10 0.2 –100 2 –1100 25–3000

Mechanical – No 7791 No 7791 No 7792loader

Stand alone test No 7790 – – –attachment for torque screwdrivers

Test attachment – No 7791-2 – –for torque screwdrivers

Extension unit – – No 7791-1 No 7792-1

Transducer* No 7721 (0.2–10 Nm) No 7721 (0.2–10 Nm) No 7722 (2–100 Nm) No 7723-3 (25–1100 Nm)No 7722 (2–100 Nm) No 7723-3 (25–1100 Nm) No 7724-1 (150–3000 Nm)

USB hub (incl. cable for – No 7753 No 7753 No 7753connection to PC)

USB adapter No 7757-1 – – –

Jack cable No 7751 2 x No 7751 2 x No 7751 2 x No 7751(connection between transducer and USB hub)

Square drive adaptor No 431 (3/8” a x 1/4” D) No 431 (3/8” a x 1/4” D) No 7787 (1/4” a x 3/4” D) No 7787 (1/4” a x 3/4” D)No 409M (1/4” a x 3/8” D) No 7788 (3/8” a x 3/4” D) No 7788 (3/8” a x 3/4” D)

No 7789 (1/2” a x 3/4” D) No 7789 (1/2” a x 3/4” D)No 409M (1/4” a x 3/8” D) No 7789-2 (3/4” a x 1|” D)

No 7789-3 (1” a x 1|” D)

Calibrating square drive – No 734K/4 (1/4” D) No 734K/4 (1/4” D) No 734K/4 (1/4” D)insert tools No 734K/5 (3/8” D) No 734K/5 (3/8” D) No 734K/5 (3/8” D)

No 734K/20 (1/2” D) No 734K/20 (1/2” D)No 734K/40 (3/4” D) No 734K/40 (3/4” D)

Adaptors No 3115 (1/4” D x 1/4” E E 6.3) No 3115 (1/4” D x 1/4” E E 6.3) – –No 3115/1 (1/4” D x 1/4” E C 6.3) No 3115/1 (1/4” D x 1/4” E C 6.3)

Calibration software TORKMASTER TORKMASTER TORKMASTER TORKMASTER

Works calibration 1 2 2 2certificate

Printer and PC are not included in the delivery.*Transducers No 7721–7723 can also be used in conjunction with workshop torque tester No 7707 W.

Mechanical base unit

Test attachmentfor torque screwdriver

Extension unit

Transducer

No 7721: 0.2 – 10 NmNo 7722: 2 – 100 NmNo 7723-3: 25 – 1100 NmNo 7724-1: 150 – 3000 Nm

USB hub No 7753

� �CableNo

7751

USB cable

PC – not includedin the delivery

Printer – notincluded in thedelivery

�

189

Torque testers

5

190

Mechanical loaders for torque wrenches and torque screwdriversThanks to the modular design, end users can put together their own mechanical loader according to theirspecific requirements. Extensions with additional components are possible any time. All the components are carefully matched to ensure compatibility and can be easily fitted. This slot-in system is easy to use and has a very accurate fit. The components can be quickly and easily locked together using the integrated screw joints. The display unit can be attached at various points of the system via a holder. In this way, every user can organise his or her work to suit themselves.

Mechanical base unit from 0.4 to 400 N m, registered design7791Measurement possible without moving the point of application of force.Thanks to a specially designed force transmission system, mechanical loader No 7791 avoids the risk of the point of force application shifting during thecalibration process. The lever below the test rail is actuated in a linear direction by the handwheel acting on a spindle. The linear motion is translated intoa rotary movement which acts on the transducer. The torque wrench to be calibrated remains in the same position throughout the calibration process.This prevents measuring errors caused by the point of force application being moved. Thanks to a low-friction linear ball bearing, the torque wrench isautomatically levelled as it is placed in the unit. A further linear ball bearing ensures the contact with the torque wrench is friction-free. The reduction inlateral forces acting on the transducer and in the friction on the point of contact with the torque wrench results in a corresponding reduction inmismeasurement.Supplied without torque wrench, transducer, display unit and holder.

‘


52110091 0.4–400 7721-1; 7722; 7723-1; 7723-2; 7723-3 815 180 704 323 1069 26.5 2533.00‘

Extension unit for No 7791, 7794-1 and 7794-2 up to 1100 N m7791-1

‘

Capacity for torque wrenches with Profile width b h L RCode N m functional length (LF) max. mm mm mm mm mm kg €‘

52110191 –1100 1390 (7791 + 7791-1) 180 308 135 673 5.4 412.00‘

7791

7791

7791-2

7791-1

7791

7791-1

7791-2

with one pair of adapter plates No 7770-3 for height compensationbetween extension unit No 7791-1 and perfectControl calibrating unitsNo 7794-1 and No 7794-2.

5

191

Mechanical base unit from 25 to 1100 N m, registered design7792

Extension unit for No 7792 up to 3000 N m7792-1

7792

7790

7792

7792-1 7792

7790

7792-1

Test attachments for torquescrewdrivers

Test attachment for torquescrewdrivers

7791-2

Can be bolted onto mechanical loaderNo 7791. The torque screwdriver to becalibrated is inserted in the square mountof the transducer and fixed using theuniversal central clamp. The handwheelensures that the required force is appliedin a controlled manner to the torquescrewdriver.

‘

Capacity b h t RCode N m mm mm mm kg €‘

52110291 –10 250 442–593 351 3.9 1110.00‘

Stand alone test attachment fortorque screwdrivers

7790

Can be bolted to mechanical loaderNo 7792. The torque screwdriver to becalibrated is inserted in the square mount ofthe transducer and fixed using the universalcentral clamp. The handwheel ensures thatthe required force is applied in a controlledmanner to the torque screwdriver.Supplied without transducer or torquescrewdriver.

‘

Capacity for transducer b h t RCode N m No mm mm mm kg €‘

58521090 –10 7721 250 442–593 351 7.9 1188.00‘

AccessoryHolder7750-1

for display unit No 7750. Can be bolted to mechanicalloaders and test attachments.

‘

RCode g €‘

52101050 165 43.20‘

‘


52110092 25–1100 7723-3; 7724-1 1390 270 722 323 1668.5 57 4231.00‘

‘

Capacity for torque wrenches with Profile width b h L RCode N m functional length (LF) max. mm mm mm mm mm kg €‘

52110192 –3000 2390 (7792 + 7792-1) 270 558 135 1073 23.9 831.00‘

5

192

Electronic torque tester for torque wrenches Sensotork® 7707 W (For complete calibration systems, see p. 186, 189)Compact workshop-based torque tester for easy adaptation by replacement of the transducers.High degree of accuracy thanks to flat transducer and conversion and digitalisation of readings within thetransducer (see p. 193).High degree of safety through display showing actual torque read-off where clicking torque wrenches areused.

Workshop torque tester Sensotork®7707 WElectronic workshop torque tester for torque wrenches, consisting of:• transducer (registered design)• holder• display unit (registered design)• tripod for display unit (with 1.5 m cable)• spiral cable• mains adaptor (110 V–230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible• square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W)• kit for attaching the unit to a workbench or wall in a horizontal or vertical testing positionfor clockwise and anticlockwise use. Units of measurement: N m, ft.lb, in.lb. The easily interchangeable transducers are attached to the holder by meansof a QuickRelease safety lock. Low lateral forces thanks to low-profile transducers, automatic detection of the transducer, flexible and user friendlybecause the unit can be used horizontally or vertically and the display unit can be placed in many positions, additional tripod with 1.5 m cable formounting the display unit to facilitate visual monitoring when using longer torque wrenches, especially broad measuring range from approx. 2% to 100%of rated value. The software No 7759-4, including USB hub and jack cable (see p. 194), enables readings to be transferred to the PC for documentingand for generating calibration certificates in accordance with DIN EN 6789:2003 (no separate power supply needed, power comes from PC). While individual transducers are being recalibrated, the torque tester itself remains on-site for further use. Wide range of application (-20°C to +60°C).Complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003. With certificate. Supplied in sturdy plastic case.

t

‘

Capacity Capacity Capacity a b h1 h2 t R R gCode No N m ft.lb in.lb '' mm mm mm mm g with box €‘

96521080 7707-1W 0.4–20 0.3–15 3.5–177 1/4 180 79 215 180 6255 9500 3154.0096521072 7707-2W 1) 2–100 1.5–74 18–885 3/8 180 79 215 180 7025 10300 3168.0096521083 7707-2-1W 2) 4–200 3–148 35–1770 1/2 180 79 215 180 7511 10975 3223.0096521084 7707-2-2W 3) 8–400 6–295 71–3540 3/4 180 79 215 180 7654 11100 3223.001

96521082 7707-3W 3) 25–1100 18–812 221–9736 3/4 180 79 215 180 7495 11000 3223.00‘

1) with square drive adaptor No 409M (1/4'' a x 3/8'' D)2) with square drive adaptors No 7789-4 (1/4'' a x 1/2'' D), No 7789-5 (3/8'' a x 1/2'' D)3) with square drive adaptors No 7787 (1/4'' a x 3/4'' D), No 7788 (3/8'' a x 3/4'' D), No 7789 (1/2'' a x 3/4'' D)‘

Üü QuickRelease

Rapid change and firm lockingof the transducers thanks to theQuickRelease safety lock.

Interchangeablesquare drive adapters:A set of interchangeablesquare drive adapters areconveniently stored in themounting block for a rangeof different drive sizes.

Torque testers

5

193

Transducers7721–7724

Üüregistered design, high degree of accuracy thanks to conversion and digitization of readings within the transducer itself.Not susceptible to lateral forces due to low-profile construction. Can also be used as part of a calibration system (see p. 186, 189). With certificate. Supplied in sturdy plastic case.

‘

Measuring ranges by deviation of indicationDisplay deviation value Display deviation value Display deviation value

Code No ± 1% of the reading ± 0.5% of the reading ± 0.25% of the reading a RN m ft.lb in.lb N m ft.lb in.lb N m ft.lb in.lb '' g €

‘

52100020 7721-0 1)U 0.2–10 0.15–7.4 1.8–88.5 1–10 0.74–7.4 8.9–88.5 2–10 1.5–7.4 17.7–88.5 1/4 1735 1449.0052100021 7721 2) 0.2–10 0.15–7.4 1.8–88.5 1–10 0.74–7.4 8.9–88.5 2–10 1.5–7.4 17.7–88.5 1/4 1735 1449.0052100026 7721-1 0.4–20 0.3–15 3.5–177 2–20 1.5–15 18–177 4–20 3–15 35–177 1/4 1735 1449.0052100022 7722 2–100 1.5–74 18–885 10–100 7–74 89–885 12–100 9–74 106–885 3/8 2486 1599.001

52101023 7723-1 4–200 3–148 35–1770 20–200 15–148 177–1770 40–200 30–148 354–1770 1/2 2983 1599.0052102023 7723-2 8–400 6–295 71–3540 40–400 30–295 354–3540 80–400 59–295 708–3540 3/4 3134 1599.0052100028 7723-3 25–1100 18–812 221–9736 110–1100 81–812 974–9736 220–1100 162–812 1947–9736 3/4 2998 1599.0052100029 7724-1 3) 150–3000 111–2214 1328–26553 300–3000 221–2214 2655–26553 600–3000 443–2214 5311–26553 1 1/2 10500 2899.00‘

1) for calibrating torque wrenches2) for calibrating torque screwdrivers3) for use with mechanical loader No 7792 and 7792-1 (see p. 191)‘

Note!Torque testers are measuring instruments! They have to be regularly calibrated and, where necessary, adjusted, using suitable calibrationequipment. We recommend recalibrating every 12 months.‘

No 7721-1 7722 7723-1 7723-2 7723-3

730D/10 +++730D/20 +++730D/40 +++730D/65 +++730N/2 +++730N/5 +++730N/10 +++ ++730N/12 +++730N/20 +++ ++730N/40 +++730N/65 +++730Na/2 +++730Na/5 +++730Na/10 +++ ++730Na/20 +++ ++730Na/40 +++730/2 +++ ++ +730/4 +++ ++ +730a/2 +++ ++ +730a/4 +++ ++ +730/5 +++ ++730/10 +++ ++ +730/12 +++ ++ +730/20 +++ ++ +730/40 +++ ++730/65 +++

Which transducer is for which torque wrench?(Calibration in accordance with DIN EN ISO 6789: 2003)

STAHLWILLE’s recommendation:+++ very well suited ++well suited + suitable

No 7721-1 7722 7723-1 7723-2 7723-3 7724-1

730a/5 +++ ++730a/10 +++ ++ +730a/12 +++ ++ +730a/20 +++ ++ +730/80 +++ +720Nf/80 +++ +721/5 +++ ++721/15 +++ ++ +721/30 +++ ++721Nf/80 +++ +721Nf/100 +++ +755R/1 +++755/4 +++ ++755/10 +++ ++ +755/20 +++ ++ +755/30 +++ ++71/40 +++ ++ 71/80 +++ + 71aR/80 +++ +73Nm/15 +++ ++ 712R/6 +++712R/20 +++712R/40 +++ 713R/6 +++ 713R/20 +++ 713R/40 +++

5

194

Accessories for workshop torquetester and calibration systems

Display unit7750registered design, for displaying the actual torqueas measured. Units of measurement: N m, ft.lb,in.lb. Modes of operation: track, peak hold, firstpeak (only with manual operation), additionaldisplay of actual torque applied with clicking torquewrenches. Swivels to any desired position thanksto universal ball-joint.

‘

RCode g €‘

52100050 182 709.00‘

USB adaptor, jack cable andsoftware Torkmaster

7759-4

Link between perfectControl ortransducer and PC. For adjusting andcalibrating torque wrenches andtorque screwdrivers. Producescalibration certificates in accordancewith DIN EN ISO 6789: 2003, whichcan be printed out or saved as PDFfiles.• as found / as left calibrations canbe documented.

• graphical representation of thetorque progression

• user management• 17 languages• equipment testing system

System requirements: • PC• Microsoft Windows XP SP3 or later operating system• USB connection

‘

L RCode m g €‘

96583629 1.5 137 120.40‘

Jack cable7751Connection between transducerand USB adaptor or display unit,with jacks at both ends, 90° angled.

‘

L RCode m g €‘

52110051 1.5 50 8.20‘

USB adaptor with USB cable7753for connecting up to 5 transducersto the PC for evaluating your data.

‘

L b h RCode mm mm mm g €‘

52110053 125 65 41 230 445.00‘

Spiral cable7752Connection between transducer and display unitor USB adaptor, with jacks at both ends, 90° angled.

‘

L RCode max. mm g €‘

52110052 500 35 10.30‘

Mains adaptor7760Input: 110 V–230 V AC ,Output: 12 V DC,with interchangeable socketadaptors.

‘

RCode Volt g €‘

52110056 110–230 385 38.70‘

Square drive adaptor409M1/4'' socket x 3/8'' plug (6.3 x 10 mm).

‘

L O RCode mm mm g €‘

11030010 13 25 14 14.40‘

Torque testers

5

195

Square drive adaptor77871/4'' socket x 3/4'' plug (6.3 x 20 mm).

‘


58521087 15.5 29 41 23.00‘

Square drive adaptor77883/8'' socket x 3/4'' plug (10 x 20 mm).

‘


58521088 23.5 29 52 23.00‘

Square drive adaptor77891/2'' socket x 3/4'' plug (12.5 x 20 mm).

‘


58521089 23.5 29 42 23.00‘

Square drive adaptor7789-23/4'' socket x 1 1/2'' plug (20 x 40 mm).

‘


58523089 44 60 383 89.50‘

Square drive adaptor7789-31'' socket x 1 1/2'' plug (25 x 40 mm).

‘


58524089 44 60 291 89.50‘

Square drive adaptor7789-41/4'' socket x 1/2'' plug (6.3 x 12.5 mm).

‘


58524090 15.5 29 25 23.00‘

Square drive adaptor7789-53/8'' socket x 1/2'' plug (10 x 12.5 mm).

‘


58524091 15.5 29 28 23.00‘

Calibrating square drive insert tools734KWithout a ball or pin. Optimum measuring results during calibration thanksto reduced lateral forces.

‘


58243004 4 1/4 9 x 12 20 14 17.5 76 24.8058243005 5 3/8 9 x 12 20 14 17.5 80 24.8058243020 20 1/2 14 x 18 27 18 25 218 27.6058243040 40 3/4 14 x 18 40 25 25 410 45.60‘

1

STAHLWILLEis an accredited calibrating laboratory.Controlled tightening is a must in terms of safety and the lifetimesof the screws and bolts.

STAHLWILLE has been awarded accreditation as a calibratinglaboratory for torque by the German Accreditation Body (DAkkS)because of the Company’s skills in the field of torque controlledtightening.

STAHLWILLE’s calibration serviceThe STAHLWILLE calibration service is in a position to offer both theusual works calibration certificate and the DAkkS certificate.

Included in the price of calibration of STAHLWILLE products are thecosts of any adjustment required and a second calibration operation.

In addition, the STAHLWILLE calibration service provides completemonitoring, documentation archiving and follow-up timing for torquewrenches and testers.

Additional information on these services is available on request.

Torque tools

5

196

MA = desired tightening torque

W = reading/setting W = MA

WK = adjusted reading or setting value WK= MA

LF = functional length(see dimension table for torque wrenches)

LK = adjusted functional lengthLK = LF – SF + S (bzw.Σ S)

S = extension of STAHLWILLE inserts or special tools(see dimension table for inserts)

SF = standard extension(see dimension table for torque wrenches)

Σ S = total of all extensions of the attached insertsSadapter + Sinsert + …

Dimension table for torque wrenches: LF = 424,5 mm, SF = 25 mmDimension table for ring insert tools: S = 28 mm

Adjusted setting value WK = 188.7 N m value to set 189 N m

WK =MA • LF 190 N m • 424.5 mm 190 N m • 424.5 mm

LF – SF + S =

424.5 mm – 25 mm + 28 mm=

427.5 mmWK =

MA • LF 25 N m • 250 mm 25 N m • 250 mm

LF – SF +Σ S =

250mm –17.5mm+17.5mm+ 50.8mm=

300.8 mm

WK =MA • LF [ N m • mm]Lk mm

WK =MA • LF

LF – SF + S (or ΣS)

Example 1: adjusted setting value (1 insert tool)

Torque wrench No 730N/20 combined with ring insert tool No 732/40 size 36 mmRequired tightening torque for the screw MA = 190 N m

Dimension table for torque wrenches: LF = 250 mm, SF = 17.5 mmDimension table for square drive insert tools: S = 17.5 mmDimension table for adapters: S = 50.8 mm

Adjusted reading WK = 20.8 N m

Example 2: adjusted reading (insert tool and adapter)

Torque wrench No 71/2 combined with square drive insert tool No 734/5 and adapter No 447 size 10 mmRequired tightening torque for the screw MA = 25 N m

Dimension table for torque wrenches: LF = 336 mm, SF = 17.5 mmDimension table for square drive insert tools: S = 17.5 mm

No adjustment to setting value required on torque wrench.

Normal situationTorque wrench No 730N/10 combined with square drive insert tool No 734/5 and socket size 13 mm.Required tightening torque for the screw MA = 40 N m

→ Σ S = SF

→ W = MA

→ S = SF

→ W = MA

→ S = SF

→ W = MA

Note! This is how to achieve the correct tightening torque –even if you are using inserts with an extensionWhen you tighten fasteners using inserts whose extension length S deviates from the standard length SF, it isnecessary to recalculate the setting/display value for the torque wrench in use. Caution! If adapters are combined withinserts or special tools, use the sum of the extensions =ΣS. Where the special tool is angled to the side, WK will haveto be determined empirically.

… and this is what it looks like in the catalogue.

Basic wrenches with tool carrier for insert tools730N

‘

Fine scale J b h L LF SF RCode size W W X X X mm mm mm mm mm mm g €‘

50181002 2 2–20 N m 20–180 in.lb 1 N m 10 in.lb 0.2 N m ; 28 23 275 226 17.5 737 222.0050181005 5 10–50 N m 7–37 ft.lb 5 N m 1 ft.lb 0.25 N m ; 28 23 330 280.5 17.5 831 242.0050181010 10 20–100 N m 15–75 ft.lb 10 N m 2.5 ft.lb 0.5 N m ; 28 23 386 336 17.5 988 255.0050181012 12 25–130 N m 20–95 ft.lb 10 N m 2.5 ft.lb 0.5 N m , 28 23 421 379 25 1128 268.001

50181020 20 40–200 N m 30–150 ft.lb 10 N m 5 ft.lb 1 N m , 28 23 467 424.5 25 1264 291.0050181040 40 80–400 N m 60–300 ft.lb 20 N m 10 ft.lb 2 N m , 28 23 607 564.5 25 1655 423.0050181065 65 130–650 N m 100–480 ft.lb 50 N m 20 ft.lb 2.5 N m , 30.6 25.6 890 848 25 3231 633.0050581002 a/2 20–180 in.lb 1.5–15 ft.lb 10 in.lb 0.5 ft.lb 2 in.lb ; 28 23 275 226 17.5 737 243.001

50581005 a/5 90–450 in.lb 7–37 ft.lb 50 in.lb 1 ft.lb 2.5 in.lb ; 28 23 330 280.5 17.5 831 241.0050581010 a/10 180–900 in.lb 15–75 ft.lb 100 in.lb 2.5 ft.lb 5 in.lb ; 28 23 386 336 17.5 988 261.0050581020 a/20 350–1800 in.lb 30–150 ft.lb 100 in.lb 5 ft.lb 10 in.lb , 28 23 467 424.5 25 1264 291.0050581040 a/40 60–300 ft.lb 800–3600 in.lb 20 ft.lb 100 in.lb 2 ft.lb , 28 23 607 564.5 25 1655 423.00‘

730N/10


P

‘


58224013 13 , 22.5 11 25 130 31.1058224014 14 , 23 11 25 123 31.1058224015 15 , 24 11 25 128 31.7058224016 16 , 25.5 12 25 133 31.101

58224017 17 , 27 12 25 135 31.1058224018 18 , 29 13 25 134 31.1058224019 19 , 30.5 13 25 138 31.1058224021 21 , 33 15 25 144 37.001

58224022 22 , 34.5 15 25 145 37.0058224024 24 , 37.5 15 25 153 37.0058224027 27 , 42.5 17 25 162 37.0058224028 28 , 45.5 19 25 175 44.001

58224030 30 , 46 19 25 182 41.8058224032 32 , 47.5 19 25 181 41.8058224034 34 , 52 19 28* 210 44.0058224036 36 , 54 19 28* 203 41.801

58224041 41 , 60 20 30* 240 41.80‘

* Caution! Modified settings on torque wrench.‘

MA • LF

LF – SF + S

Nm • mm

mm

190 Nm • 424.5 mm

424.5 mm – 25 mm + 28 mm( )Required tightening torque for the screw MA = 190 NmRequired setting value WK

WK = =

WK = 188.7 Nm

Adjusted setting value on torque wrench No 730N/20: 189 Nm

Example 1 (see above):Torque wrench 730N/20, combined with insert tool 732/40, size 36 mm.Required tightening torque for the screw MA = 190 N m

Dimension table for torque wrenches: LF = 424.5 mm; SF = 25 mmDimension table for insert tools: S = 28 mm

Üü

1

1

6

Screwdrivers

198

The ergonomically designed, almost square handleshape gives maximum contact with the handle, maximumleverage and, as a result, maximum non-slip force transmission, even with oily hands.

The power is where you put it with the screwdriver series

The efficiency with which you use a screwdriver in your daily work, and the safety with which youwork, depend to a large extent on the quality of thetool. It is not just the use of high-grade materials but also the shape that matters – in particular theshape of the handles – if you want to stay in control. STAHLWILLE’s screw drivers unitethese positive qualities in a manner which is closeto perfect. The result is a longlife, ergonomically designed tool providing easy working combinedwith maximum force transmission – even withgreasy hands.

handles are made upof 3 components:

1st componentExtremely resistant, impact-safe core made of blackpolypropylene (PP).

2nd componentSoft, heat-bonded inlay made of easy-to-grip thermoplastic elastomer (TPE).

3rd componentTwo large surfaces coated withspecial fibres, resistant long-termto solvents to improve force transmission and work safety.

screwdrivers are available in sets conveniently positioned in plastic inlays or TCS safetyinlays, designed for use with STAHLWILLE Tool Trolleysand Tool Boxes.

Together, these features make the tools very pleasant tohandle and prevent your hands from slipping off the handles or twisting,even if your hands are damp or oily.

Additional Tommy-bar holeWhen things get really tough, the additional Tommy-bar hole willcope with a fair amount of torque.

BladesMade of high-grade ChromeAlloy Steel. Through-hardened. Anchored firmlyin the haft due to the extra-wide, forged tang.High resistance to bending.

199

Great freedom of choice – screwdrivers

The elastic handle componentsThe soft rubber textured thermoplastic elastomer (TPE) fits snugly in the hand. Thesesections are injection mouldedaround the hard core and bonded to it inseparably.

The firm handle componentsThe green zones are made of high-grade,impact-safe polypropylene (PP). The tang is anchored in the core to allow force to be transferredthrough it..

TipsBlack, extremely tough,retain their shape.Whether you use thestraight-bladed or Phillipstype – the crosshatchedblade tips will accuratelytransmit maximum forceto the screw head.

A new challenge every day, a new tool every dayto meet that challenge. The series was developed for professionals faced with new challenges on a daily basis. Development focussed on three crucial user requirements: durability and reliability, safety in use, pleasant to handle. These requirements are met in full by

screwdrivers – in fact, they feel so natural, you will hardly notice them.

4 handle sizesThe handle sizes for the

screwdrivers aredesigned specifically tomatch the drive profiles.

The profilesis available for the

following screwhead profiles:r Slottedk PH cross-headl PZ cross-headn TORX®

o TORX® Tamper Resistant with a central bore

i Hex with a ball-endt TORQ-SET®

Impact-resistant capFor use under extremeconditions, the is also available with a one-piece shaft, an impact head and a metal impact cap.

The hand-stop helps stop injuriesFlange-like design. Supports your hand in the direction of the blade to prevent it slipping off the handle. Features integrated anti-roll shape.

The multifunctional sectionThe lower end of the handle is deliberately made extra-long. This enables the thumband index finger to wrap around more easily and spin the screwdriver.

The transmission zoneThe rounded cross-section in the central areacombines maximum grip and easy turning.

VDE insulated screwdriversHigh-grade materials and durability testing guarantee absolute safetywhen working on AC systems up to 1000 V (effective voltage) or 1500 V DC.

T

Screwdrivers

6

200

DRALL+ set of screwdrivers4691Set of 7 DRALL+

screwdrivers.Content:r 4620: size 1 (0.6 x 3.5 x 75 mm)

size 2 (0.8 x 4.0 x 100 mm)size 3 (1.0 x 5.5 x 125 mm)size 4 (1.2 x 6.5 x 150 mm)

r 4628: size 1 (0.4 x 2.5 x 60 mm)k 4630: size 1; size 2

‘

RCode g S €‘

96469110 620 1 40.50‘



size 2 (0.8 x 4.0 x 100 mm)size 3 (1.0 x 5.5 x 125 mm)size 4 (1.2 x 6.5 x 150 mm)size 5 (1.6 x 8.0 x 175 mm)

k 4630: size 1; size 2; size 3

‘

RCode g S €‘

96469210 870 1 58.55‘




r 4628: size 1 (0.4 x 2.5 x 60 mm)k 4632: size 1; size 2r 4724: size 2 (1.0 x 5.5 x 25 mm)k 4734: size 2

‘

RCode g S €‘

96469310 950 1 76.05‘

DRALL+ set of screwdrivers4696Set of 6 DRALL+ screwdrivers with an impact cap.Content:r 4622SK:


k 4632SK: size 1; size 2

‘

RCode g S €‘

96469610 870 1 69.65‘

DRALL+set of screwdrivers4697Set of 8 DRALL+


size 2 (0.8 x 4.0 x 100 mm)r 4622: size 1 (1.0 x 5.5 x 100 mm)

size 2 (1.2 x 6.5 x 125 mm)size 3 (1.2 x 8.0 x 150 mm)

k 4730: size 1k 4732: size 2; size 3

‘

RCode g S €‘

96469710 930 1 69.45‘

n DRALL+ set of TORX®

screwdrivers4694

Set of 9 DRALL+

screwdrivers for TORX® screws.Content: n 4650: T8, T9, T10, T15, T20, T25,

T27, T30, T40

‘

RCode g S €‘

96469410 730 1 71.75‘

o DRALL+ set of TORX®

screwdrivers4699

Set of 9 DRALL+ screwdrivers for TORX® screws (TORX® TAMPER RESISTANT).Content: o 4656: T8, T9, T10, T15, T20, T25,

T27, T30, T40(with hollow point)

‘

RCode g S €‘

96469910 740 1 85.45‘

TCS 4620/4630


RCode g €‘

96838278 490 65.65‘


‘

No 4630 sizes 1; 2; 3‘

6

201

TCS 4620/4660VDE+10767

xö

530 x 350 x 35 mm, 27 pieces‘

RCode g €‘

96831168 2080 206.35‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

TCS 4620/4660VDE

xö

530 x 350 x 40 mm, 18 pieces‘

RCode g €‘

96831179 1689 180.55‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

TCS 4621/4734/16


RCode g €‘

96832098 1490 218.45‘

No 4621 size 0 (0.4 x 2.5 x 80 mm); size 1 (0.5 x 3.5 x 90 mm);size 2 (0.6 x 4.0 x 100 mm);size 4 (1.0 x 6.5 x 140 mm);size 5 (1.2 x 8.0 x 160 mm)

‘

No 4631 size 1; 2‘

No 4632 size 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10506 0.8 x 4.0 x 300 mm‘

No 10518 1.0 x 5.5 x 410 mm‘

No 12600 500 g‘

No 12922E O 6 mm‘

TCS 4622/4650+10760+10766

xö

530 x 350 x 40 mm, 36 pieces‘

RCode g €‘

96831196 1895 238.00‘

No 4622 size 1 (1.0 x 5.5 x 100 mm);size 2 (1.2 x 6.5 x 125 mm);size 4 (1.6 x 10.0 x 175 mm);size 5 (2.0 x 12.0 x 200 mm)

‘

No 4630 size 1‘

No 4632 size 3‘


‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘


‘

Screwdrivers

6

202

r Screwdrivers for slotted screwsDRALL+

4620

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel,chrome plated, black tips.

L 2

L1

ab

‘

a b L1 L2 RCode size mm mm mm mm g S €‘

46201035 1 0.6 3.5 75 160 37 10 4.4046201040 2 0.8 4.0 100 185 40 10 5.2546201055 3 1.0 5.5 125 240 79 10 6.6046201065 4 1.2 6.5 150 265 100 10 7.751

46201080 5 1.6 8.0 175 300 136 10 11.5046201100 6 1.6 10.0 200 325 163 5 13.2046201120 7 2.0 12.0 250 375 215 5 15.20‘


4621

parallel blades, as per VSM(Swiss Standard), Chrome Alloy Steel,chrome plated, black tips.

‘


46211025 0 0.4 2.5 80 165 36 10 4.1546211035 1 0.5 3.5 90 175 40 10 4.2546211040 2 0.6 4.0 100 185 42 10 4.2546211055 3 0.8 5.5 120 235 78 10 6.601

46211065 4 1.0 6.5 140 255 96 10 6.6046211080 5 1.2 8.0 160 275 117 10 8.4046211100 6 1.6 10.0 180 305 160 10 11.70‘


4622

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, with hexagon,Chrome Alloy Steel,chrome plated, black tips.

‘


46221055 1 1.0 5.5 100 215 85 10 7.9046221065 2 1.2 6.5 125 240 100 10 10.2046221080 3 1.2 8.0 150 275 159 10 13.1046221100 4 1.6 10.0 175 300 174 10 14.601

46221120 5 2.0 12.0 200 325 310 5 19.5046221140 6 2.5 14.0 250 375 331 5 24.90‘


4622SK

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, with impact cap andhexagonal shank, Chrome AlloySteel, chrome plated, black tips.

‘


46220040 1 0.8 4.0 90 195 50 10 9.4046220055 2 1.0 5.5 100 215 106 10 10.9046220065 3 1.2 6.5 125 240 135 5 12.7046220080 4 1.2 8.0 150 275 191 5 15.701

46220100 5 1.6 10.0 175 300 226 5 16.5046220120 6 2.0 12.0 200 325 267 5 24.3046220140 7 2.5 14.0 250 375 340 5 30.20‘

r Carburettor screwdrivers DRALL4724DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2,stubby, Chrome Alloy Steel,chrome plated, black tips.

‘


47241045 1 0.6 3.5 25 80 34 10 5.5547241060 2 1.0 5.5 25 80 32 10 5.5547241080 3 1.2 8.0 25 80 39 10 6.15‘

r Electricians screwdrivers forslotted screws DRALL+

4628

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel,chrome plated, black tips.

‘


46281025 1 0.4 2.5 60 145 38 10 3.5546281035 2 0.6 3.5 75 160 40 10 3.9546282035 3 0.6 3.5 100 185 41 10 4.5046281040 4 0.8 4.0 125 210 46 10 4.751

46281055 5 1.0 5.5 150 265 92 10 5.8046282055 6 1.0 5.5 200 315 102 10 6.70‘

k Cross-head screwdriversDRALL+

4630

Phillips-Recess®,DIN ISO 8764-1, -2, ISO 8764-1, -2,Chrome Alloy Steel,chrome plated, black tips.‘

PH L1 L2 RCode size mm mm g S €‘

46301000 0 60 145 35 10 4.2046301001 1 80 185 44 10 5.4546301002 2 100 215 90 10 7.5046301003 3 150 275 146 10 10.10‘


4631

Phillips-Recess®, extra long,DIN ISO 8764-1, -2, ISO 8764-1, -2,Chrome Alloy Steel, chrome plated, black tips.

‘


46311001 1 250 355 110 1 13.9046311002 2 250 365 122 1 18.00‘


4632

with hexagon, Phillips-Recess®, DIN ISO 8764-1, -2, ISO 8764-1, -2,Chrome Alloy Steel, chrome plated, black tips.

‘


46321001 1 80 185 45 10 6.1546321002 2 100 215 100 10 9.1546321003 3 150 275 170 5 14.0046321004 4 200 325 237 5 20.50‘

6

203


4632SK

with impact cap and hexagonal shank, Phillips-Recess®, DIN ISO 8764-1, -2, ISO 8764-1, -2, Chrome Alloy Steel, chrome plated,black tips.

‘


46320001 1 85 190 58 10 9.3546320002 2 100 215 130 10 11.6046320003 3 150 275 194 5 15.70‘

k Cross-head screwdrivers DRALL4734Phillips-Recess®,DIN ISO 8764-1, -2, ISO 8764-1, -2, stubby,Chrome Alloy Steel, chrome plated, black tips.

‘


47341001 1 25 80 27 10 5.5547341002 2 25 80 31 10 5.85‘

t Screwdrivers DRALL+4636TORQ-SET®, hexagonal blade,phosphatised.

‘

L1 L2 outside RCode No mm mm E'' g S €‘

46360002 2 100 215 1/4 92 5 15.7046360004 4 100 215 1/4 93 5 15.7046360006 6 100 215 1/4 92 5 15.7046360008 8 100 215 1/4 93 5 15.701

46360010 10 100 215 1/4 93 5 15.7046360016 1/4 150 265 5/16 138 5 23.80‘

l Cross-head screwdriversDRALL+

4640

POZIDRIV/SUPADRIV®, DIN ISO 8764-1, -2, ISO 8764-1, -2,Chrome Alloy Steel, chrome plated, black tips.

‘

PZ L1 L2 RCode size mm mm g S €‘

46401000 0 60 145 35 10 5.9046401001 1 80 185 44 10 7.2046401002 2 100 215 89 10 9.0546401003 3 150 275 145 5 12.30‘

l Cross-head screwdrivers DRALL4744POZIDRIV/SUPADRIV®,DIN ISO 8764-1, -2, ISO 8764-1, -2,stubby, Chrome Alloy Steel, chrome plated, black tips.‘


47441001 1 25 80 28 10 6.8047441002 2 25 80 34 10 7.55‘

n TORX® screwdrivers DRALL+4650for inside TORX® screws,Chrome Alloy Steel,chrome plated, black tips.

‘

C L1 L2 RCode size mm mm mm g S €‘

46501005 T5 U 1.4 60 145 30 5 5.7046501006 T6 1.6 60 145 35 5 5.7046501007 T7 2.0 60 145 35 5 5.7046501008 T8 2.3 60 145 35 5 6.901

46501009 T9 2.5 60 145 35 5 6.9046501010 T10 2.7 80 165 40 5 6.9546501015 T15 3.3 80 165 38 5 7.2046501020 T20 3.8 100 205 46 5 7.501

46501025 T25 4.4 100 205 50 5 7.9046501027 T27 5.0 115 230 90 5 8.9546501030 T30 5.5 115 230 90 5 8.9546501040 T40 6.6 115 240 131 5 10.501

46501045 T45 7.8 130 255 136 5 12.70‘

TCS 4650


RCode g €‘

96838767 350 83.75‘

No 4650 sizes T8; T9; T10; T15; T20; T25; T27;T30

‘

n TORX® screwdrivers DRALL+4650Lfor inside TORX® screws,extra long, Chrome Alloy Steel,chrome plated, black tips.

‘


46501115 T15 3.3 250 335 52 5 9.4046501120 T20 3.8 250 355 64 5 9.5546501125 T25 4.4 250 355 66 5 10.4046501130 T30 5.5 250 365 122 5 11.10‘

Screwdrivers

6

204

o TORX® screwdrivers DRALL+4656with hollow point (TORX® TAMPER RESISTANT),Chrome Alloy Steel, chrome plated, black tips.

‘


46560008 T8 2.3 60 145 39 5 7.9046560009 T9 2.5 60 145 35 5 7.9046560010 T10 2.7 80 165 39 5 7.9046560015 T15 3.3 80 165 39 5 8.201

46560020 T20 3.8 100 205 42 5 8.5546560025 T25 4.4 100 205 46 5 10.1046560027 T27 5.0 115 230 90 5 10.5046560030 T30 5.5 115 230 90 5 10.901

46560040 T40 6.6 115 240 120 5 13.5046560045 T45 7.8 130 255 118 5 14.30‘

i Ball ended hexagon driversDRALL+

10507N KK

for use on hexagon socket headscrews, swivel angle up to 25° eachside, Chrome Alloy Steel, chrome plated, black tips.

‘

B L1 L2 RCode mm mm mm g S €‘

73101003 3 300 385 56 5 11.2073101005 5 300 415 132 5 12.80‘

VDE-insulated ScrewdriversIEC 60900 C T AC 1000 VHigh quality materials and stringent tests guaranteesafe use on “live” lines up to 1000 V or 1500 V DC. Individually tested at 10 000 V.

Screwdriver set DRALL+4695 VDESet with 6 screwdrivers DRALL+,IEC 60900 C, safety insulated.z AC 1000 VContent:r 4660 VDE:


k 4665 VDE: size 1, size 2

‘

RCode g S €‘

96469510 620 1 43.35‘

TCS 4660/4665


RCode g €‘

96838766 400 65.85‘


‘

No 4665 VDE size 1; 2‘

r Electricians screwdriversDRALL+

4660 VDE

IEC 60900 C, safety insulated, blade gunmetal finished, Chrome Alloy Steel.

‘


46601025 1 0.4 2.5 75 160 43 10 4.6046601030 2 0.5 3.0 100 185 39 10 5.4546601035 3 0.6 3.5 100 205 42 10 5.4546601040 4 0.8 4.0 100 205 46 10 6.451

46601055 5 1.0 5.5 125 240 90 10 8.0546601065 6 1.2 6.5 150 265 115 10 10.1046601080 7 1.2 8.0 175 300 170 10 13.60‘


4665 VDE

Phillips-Recess®, IEC 60900 C, safety insulated, blade gunmetalfinished, Chrome Alloy Steel.

‘


46651000 0 60 145 35 10 5.2046651001 1 80 185 47 10 6.3546651002 2 100 215 89 10 8.8046651003 3 150 275 159 10 13.50‘

l Cross-head screwdriversDRALL+

4670 VDE

POZIDRIV/SUPADRIV®, IEC 60900 C, safety insulated, blade gunmetalfinished, Chrome Alloy Steel.

‘


46701000 0 60 145 36 10 6.4546701001 1 80 185 46 10 8.3046701002 2 100 215 89 10 10.50‘

6

205

Screwdrivers

3K DRALL set of screwdrivers4891Set of 6 3K DRALLscrewdrivers.Content:r 4820: 0.6 x 3.5 x 75 mm

0.8 x 4.0 x 100 mm1.0 x 5.5 x 125 mm1.2 x 6.5 x 150 mm

k 4830: size 1; size 2

‘

RCode g S €‘

96489110 530 1 44.80‘

3K DRALL set of screwdrivers4892Set of 8 3K DRALLscrewdrivers.Content:r 4820: 0.6 x 3.5 x 75 mm

0.8 x 4.0 x 100 mm1.0 x 5.5 x 125 mm1.2 x 6.5 x 150 mm1.6 x 8.0 x 175 mm

k 4830: size 1; size 2; size 3

‘

RCode g S €‘

96489210 745 1 69.60‘

o 3K DRALL set of TORX®

screwdrivers4899

Set of 9 3K DRALL screwdriversfor TORX® screws(TORX® TAMPER RESISTANT).Content:o 4856: T8, T9; T10; T15; T20; T25;

T27; T30; T40(with hollow point)

‘

RCode g S €‘

96489910 513 1 98.75‘

TCS 4820/4830


RCode g €‘

96838184 555 75.40‘


‘

No 4830 sizes 1; 2; 3‘

TCS 4724/4840+10767

xö

530 x 350 x 45 mm, 24 pieces‘

RCode g €‘

96830706 1755 255.30‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘


‘

No 4830 sizes 1; 2; 3No 4840 size 1

‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 7756‘

No 12922E O 6 mm‘

r 3K DRALL screwdrivers forslotted screws

4820

DIN 5265, ISO 2380, Chrome Alloy Steel, matt chrome plated, black tips.

‘

a b L1 L2 RCode mm mm mm mm g S €‘

48201035 0.6 3.5 75 170 23 10 6.2548201040 0.8 4.0 100 195 32 10 6.4048202055 1.0 5.5 125 220 58 10 7.6048201065 1.2 6.5 150 265 100 10 8.551

48201080 1.6 8.0 175 290 118 10 12.8048201100 1.6 10.0 200 315 158 5 14.0048202100 2.0 12.0 250 375 218 5 17.00‘

k 3K DRALL cross-headscrewdrivers

4830

Phillips-Recess®,DIN 5262, ISO 8764,Chrome Alloy Steel,matt chrome plated, black tips.

‘


48301000 0 60 155 28 10 6.1548301001 1 80 175 33 10 6.8548301002 2 100 215 70 10 9.1548301003 3 150 275 126 5 12.001

48301004 4 200 325 251 5 15.00‘

Screwdrivers

6

206

l 3K DRALL cross-headscrewdrivers

4840

POZIDRIV/SUPADRIV®,DIN 5262, ISO 8764,Chrome Alloy Steel,matt chrome plated, black tips.

‘


48401001 1 80 175 33 10 8.0548401002 2 100 215 70 10 10.10‘

TCS 4856


RCode g €‘

96838755 447 88.45‘

No 4856 sizes T8; T9; T10; T15; T20; T25; T30‘

o 3K DRALL TORX® screwdrivers4856with hollow point(TORX® TAMPER RESISTANT),Chrome Alloy Steel,matt chrome plated, black tips.

‘


48560006 T6* 1.6 50 145 45 5 7.7048560007 T7 2.0 50 145 37 5 8.6548560008 T8 2.3 60 155 50 5 8.6548560009 T9 2.5 60 155 50 5 8.651

48560010 T10 2.7 80 175 26 5 8.7548560015 T15 3.3 80 175 52 5 9.2048560020 T20 3.8 100 215 32 5 9.8048560025 T25 4.4 100 215 55 5 11.801

48560027 T27 5.0 115 230 58 5 12.8048560030 T30 5.5 115 230 63 5 13.0048560040 T40 6.6 115 240 86 5 16.10‘

* without hollow point‘

Electronics Screwdrivers

Electronics screwdrivers set47977 piecesContent:r 4751: size 4 (0.3 x 1.5 x 40 mm)


k 4752: size 00, size 0, size 1

‘

RCode g S €‘

96479710 285 1 41.50‘

r Screwdrivers for slotted screws4751

‘


47510001 1 0.16 0.8 40 140 12 5 6.1547510002 2 0.18 1.0 40 140 12 5 6.1547510003 3 0.25 1.2 40 140 12 5 5.5047510004 4 0.3 1.5 40 140 19 5 4.551

47510005 5 0.3 1.8 60 160 10 5 4.0547510006 6 0.4 2.0 60 160 19 5 4.1547510007 7 0.4 2.5 75 175 14 5 4.3047510008 8 0.5 3.0 75 175 16 5 4.30‘

k Cross-head screwdrivers4752Phillips-Recess®.

‘

L1 L2 k americ. O RCode size mm mm M No. mm g S €‘

47520010 00 40 140 – – 2.5 19 5 6.1547520020 0 60 160 –2 0–1 3 13 5 5.4047520001 1 80 180 2–3 2–4 4.5 24 5 5.00‘

i Hexagon socket screwdrivers4753

‘

B L1 L2 RCode mm/'' mm mm g S €‘

47530007 0.7 / 0.028 40 140 14 5 5.9047530009 0.9 / 0.035 40 140 14 5 5.6547530013 1.3 / 0.050 40 140 19 5 4.8547530015 1.5 50 150 18 5 4.85‘

6

207

Set of reversible screwdrivers4798

11 piecesContent:r 0.6 x 3.5; 0.8 x 4.0; 1.0 x 5.5;

1.2 x 6.5 mmk sizes 1; 2l sizes 1; 2i 3; 4; 5; 6 mmi 3; 4; 5; 6 mm (ball end)n T10; T15; T20; T25; T30; T40

‘

RCode g S €‘

96479801 675 1 98.50‘

r EURO voltage tester10554built to conform to the new EN standard, tested to conformto the currently valid VDE GS standard, with plastic handle, AC 125–250 V.‘

a b L RCode mm mm mm g S €‘

77450001 1 3.5 190 37 10 4.20‘

ES 12500N/7

175 x 350 x 39 mm, 7 pieces‘

RCode g €‘

96838200 1060 96.00‘

No 12500N sizes 7; 8; 9; 10; 11; 12; 13 mm‘

83813085 Empty tray 103 8.35‘

c Nut spinners DRALL+12500NDIN 3125, Chrome Vanadium, chrome plated.

‘

A L1 L2 RCode mm mm mm g S €‘

43091004 4 125 230 58 10 8.5543091045 4.5 125 230 49 10 8.5543091005 5 125 230 58 10 8.5543091055 5.5 125 230 58 10 8.801

43091006 6 125 240 98 10 8.5543091007 7 125 240 114 10 9.6543091008 8 125 240 115 10 9.9043091009 9 125 240 118 10 10.701

43091010 10 125 240 122 10 11.0043091011 11 125 250 160 5 14.7043091012 12 125 250 168 5 15.5043091013 13 125 250 170 5 16.20‘

c Nut spinners DRALL12506flexible, max. torque 8 N m, matt chrome plated.

‘


43100206 6 150 265 167 10 14.6043100207 7 150 265 168 10 14.7043100208 8 150 265 170 10 14.80‘

c T-handled nut spinners12507-2Kwith 2-component T-handle, Chrome Vanadium, matt chrome plated.

‘


43232060 6 200 224 83 10 11.7043232070 7 200 234 133 10 15.6043232080 8 200 234 135 10 15.6043232090 9 200 234 137 10 15.601

43232100 10 200 234 141 10 16.5043232110 11 200 240 169 5 17.6043232120 12 200 240 171 5 18.4043232130 13 200 240 176 5 18.70‘

r Offset screwdrivers10546DIN 5200, for slotted screws, centre handle covered with impact proofplastic, Chrome Vanadium, chrome plated.

‘

a b L RCode size mm mm mm g S €‘

73272001 1 0.6 3.5 90 8 10 5.5573272002 2 0.8 4 100 12 10 6.2073272003 3 1 5.5 125 29 10 7.2073272004 4 1.2 8 150 69 10 8.75‘

k Offset screwdrivers10551DIN 5208, for recessed headscrews, Phillips-Recess®,centre handle covered with impactproof plastic, Chrome Vanadium,chrome plated.

‘

PH L RCode size mm g S €‘

73282012 1 x 2 125 30 10 6.7073282023 2 x 3 150 72 10 10.50‘

Screwdrivers

6

208

i Hexagon key wrenches10760CVDIN ISO 2936 (metric), for socket head screws, Chrome Vanadium, nickel-plated (sizes 0.7; 0.9; 1.3 mm gunmetal finish).

‘


43150070 0.7/0.028 8 32 1 10 1.3043150090 0.9/0.035 10 32 1 10 1.3043150130 1.3/0.050 12 40 1 10 0.8543150150 1.5 14 45 1 10 0.551

43150002 2 16 50 2 10 0.5543150250 2.5 18 56 3 10 0.5543150003 3 20 63 4 10 0.7043150350 3.5 22 66 7 10 0.701

43150004 4 25 70 10 10 0.8543150005 5 28 80 18 10 1.2043150006 6 32 90 29 10 1.2543150007 7 34 95 42 10 1.401

43150008 8 36 100 59 10 1.7043150009 9 38 105 80 10 2.2543150010 10 40 112 103 10 2.6543150011 11 42 119 130 10 3.251

43150012 12 45 125 169 5 3.6043150014 14 56 140 261 5 5.6043150017 17 63 160 442 5 10.1043150019 19 70 180 603 5 14.401

43150022 22 80 200 938 1 25.3043150024 24 90 224 1248 1 28.8043150027 27 100 250 1692 1 35.0043150030 30 112 280 2434 1 64.501

43150032 32 125 315 3117 1 76.0043150036 36 140 355 4430 1 88.00‘

i Hexagon key wrenches10760aCV‘


43150070 0.7/0.028 8 32 1 10 1.3043150090 0.9/0.035 10 32 1 10 1.3043150130 1.3/0.050 12 40 1 10 0.8543550003 3/64 14 45 1 10 0.551

43550004 1/16 15 45 1 10 0.5543550005 5/64 16 50 2 10 0.5543550006 3/32 17 51 3 10 0.5543550007 7/64 20 54 4 10 0.901

43550008 1/8 22 57 5 10 0.9543550009 9/64 23 63 7 10 0.9543550010 5/32 25 65 10 10 0.9543550012 3/16 29 70 15 10 1.201

43550014 7/32 32 80 23 10 1.3043550016 1/4 32 87 32 10 1.4543550018 9/32 35 95 45 10 1.6043550020 5/16 40 98 59 10 1.701

43550022 11/32 41 105 75 10 2.4043550024 3/8 45 110 95 10 2.7543550028 7/16 48 124 143 10 3.8543550032 1/2 50 133 200 5 4.551

43550034 9/16 57 152 380 5 6.0543550036 5/8 59 160 380 5 9.8043550040 3/4 70 180 605 5 15.5043550044 7/8 80 200 945 1 27.90‘

Hexagon key wrenches10760CVR/8

on ring, for socket head screws,Chrome Vanadium, nickel-plated.

‘

RCode g S €‘

96431521 260 1 9.65‘

Content: 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

Hexagon key wrenchesin holder, DIN ISO 2936 (metric), for socket head screws,Chrome Vanadium, nickel-plated.

‘

RCode No g S €‘

96431501 10760CV/9 1) 245 1 10.1096435501 10760aCV/10Pc 2) 269 1 10.5096435502 10760aCV/13 3) 124 1 11.50‘

1) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm2) Content: 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8'' (in plastic-wallet)3) Content (in two holders): 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;

5/32; 3/16; 7/32; 1/4'' ‘

6

209

i Hexagon key wrenches10765/9for socket head screws,DIN ISO 2936, extra long,in holder, Chrome Vanadium, nickel-plated.Content:1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

RCode g S €‘

96432101 410 5 12.30‘

i Hexagon key wrenches10765DIN ISO 2936, for socket head screws, extra long, Chrome Vanadium, nickel-plated.

‘


43210015 1.5 14 90 3 10 0.6543210002 2 16 100 3 10 0.6543210025 2.5 18 112 5 10 0.9043210003 3 20 126 9 10 0.901

43210004 4 25 140 17 10 1.2543210005 5 28 160 31 10 1.5043210006 6 32 180 50 10 1.5543210007 7 34 190 74 10 2.801

43210008 8 36 200 100 10 3.4043210009 9 38 210 135 10 4.2043210010 10 40 224 179 10 4.4543210012 12 45 250 287 5 5.801

43210014 14 56 280 440 5 9.2543210017 17 63 320 742 5 16.0043210019 19 70 360 1048 5 22.20‘

Key wrenchesfor inside TORX® screws, in holder, Chrome Vanadium, chrome plated.

‘

RCode No g S €‘

96432201 10766/6 1) 101 1 18.5096432202 10766/9 2) 120 1 25.30‘

1) Content: sizes T15; T20; T25; T27; T30; T402) Content: sizes T8; T9; T10; T15; T20; T25; T27; T30; T40‘

n Key wrenches10766for inside TORX® screws, Chrome Vanadium, chrome plated.

‘


43220006 T6 1.6 16 38 2 10 4.0043220007 T7 2.0 16 41 2 10 4.0043220008 T8 2.3 16 44 3 10 4.0043220009 T9 2.5 16 48 3 10 4.001

43220010 T10 2.7 17 51 3 10 4.4043220015 T15 3.3 18 54 5 10 4.5043220020 T20 3.8 19 57 7 10 4.6043220025 T25 4.4 20 60 9 10 4.751

43220027 T27 5.0 21 64 15 10 5.2043220030 T30 5.5 24 70 20 10 5.4543220040 T40 6.6 26 76 29 10 6.5043220045 T45 7.8 29 83 42 10 7.851

43220050 T50 8.8 32 95 61 10 9.7543220055 T55 11.2 35 108 122 10 14.6043220060 T60 13.2 38 120 185 10 15.60‘

n Key wrenches10771/8for inside TORX® screws, extra long,with ball end on long arm, swivel angle up to 25° each side,in holder, Chrome Vanadium,gunmetal finished.Content:sizes T9; T10; T15; T20; T25; T27; T30; T40

‘

RCode g S €‘

96432701 290 1 38.10‘

n Key wrenches10771for inside TORX® screws, extra long, with ball end on long arm,swivel angle up to 25° each side,Chrome Vanadium, gunmetal finish.

‘


43270010 T10 2.7 23 121 10 5 6.0543270015 T15 3.3 27 136 15 5 6.1543270020 T20 3.8 29 148 20 5 6.2543270025 T25 4.4 33 163 24 5 6.701

43270027 T27 5.0 36 176 28 5 7.1543270030 T30 5.5 38 191 30 5 7.5043270040 T40 6.6 43 210 35 5 8.70‘

Screwdrivers

6

210

Ball ended hexagon key wrenchesin holder, Chrome Vanadium, gunmetal finish.

‘

RCode No g S €‘

96432601 10767/9 1) 420 5 25.8096435701 10767a/8 2) 283 1 22.3096435702 10767a/13 3) 465 1 32.50‘

1) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm2) Content: 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16''3) Content: 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8''‘

i Ball ended hexagon keywrenches

10767

for hexagon socket head screws,with ball end on long arm, swivel angle up to 25° each side,Chrome Vanadium, gunmetal finish.

‘


43570130 1.3/0.050 12 72 1 10 2.1543260015 1.5 14 90 1.5 10 2.7043260002 2 16 100 3 10 2.5043260025 2.5 18 112 5.5 10 2.501

43260003 3 20 126 9 10 2.4043260004 4 25 140 18 10 2.6543260005 5 28 160 31 10 3.0043260006 6 32 180 50 10 3.851

43260008 8 36 200 100 10 5.4043260010 10 40 224 188 10 6.7543260012 12 45 224 297 10 7.75‘

i Ball ended hexagon keywrenches

10767a

‘


43570130 1.3/0.050 12 72 1 10 2.1543570004 1/16 14 80 1.5 10 2.1543570005 5/64 16 89 3 10 2.1543570006 3/32 18 101 5 10 2.151

43570007 7/64 20 111 7 10 2.1543570008 1/8 20 121 9.5 10 2.1543570009 9/64 23 136 13 10 2.1543570010 5/32 25 149 16 10 2.251

43570012 3/16 26 163 27 10 2.3543570014 7/32 29 170 42 10 2.8043570016 1/4 31 179 60 10 3.2543570020 5/16 36 189 102 10 4.001

43570024 3/8 38 200 164 10 5.95‘

i Set: Ball ended hexagon key wrenches

10767H/9

for recessed hexagonal screws,swivel angle up to 25° each side, from size 3 mm with ring,with ball end on long arm,facilitates quick, safe work in awkward places, screws stay on the head once attached,in holder, Chrome Vanadium, gunmetal finish.Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

‘

RCode g S €‘

96432602 401 5 39.40‘

i Ball ended hexagon key wrenches

10767H

for hexagon key wrenches,swivel angle up to 25° each side,with ball end on long arm,facilitates quick, safe work in awkward places, screws stay on the head once attached,Chrome Vanadium, gunmetal finish.

‘


46231003 3 20 126 8 10 3.8546231004 4 25 140 17 10 4.0046231005 5 28 160 30 10 4.3046231006 6 32 180 50 5 5.201

46231008 8 36 200 100 5 7.6046231010 10 40 224 175 5 9.80‘

Angled key wrenchesin a convenient holderwith various different drivers, internal hexagon,ball-end internal hexagon (metric), TORX®.Blades are crafted in high-alloy, corrosion-freechrome nickel steel. Blade points on internalhexagons are chamfered to facilitate insertion into the screw head. 100% greater torque thanks tothickened neck area on ball-end. Holder made offibreglass reinforced plastic, extremely heavy duty,with an ergonomically shaped grip. Blades arepivotable in the holder up to 270°, making themideal for work in confined spaces.

i inch10761a*Content: 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4''

‘

RCode g S €‘

43360002 108 1 10.10‘


n TORX®10761TX*Content: T9; T10; T15; T20; T25; T27; T30; T40‘

RCode g S €‘

43360003 148 1 19.50‘


i Ball end metric10761KK*Content: 4; 5; 6; 8; 10 mm‘

RCode g S €‘

43360004 230 1 22.40‘


6

211

ES 10768/6

350 x 350 x 37 mm, 6 pieces‘

RCode g €‘

96838119 780 62.40‘

No 10768 sizes 3; 4; 5; 6; 8; 10 mm‘

83812042 Empty tray 209 15.80‘

i T-handled screwdrivers10768for socket head screws, Chrome Vanadium,matt chrome plated, black tips.

‘


43250020 2 100 116 10 10 4.9543250025 2.5 100 116 10 10 5.0043250030 3 150 166 20 10 5.4543250040 4 150 175 40 10 5.801

43250050 5 200 225 60 10 6.1043250060 6 200 225 80 10 6.8043250080 8 200 235 150 5 9.2543250100 10 200 235 210 5 13.20‘

TCS 10765/10768/12507/19

xö

530 x 350 x 30 mm, 19 pieces‘

RCode g €‘

96830621 1640 150.30‘

No 10765/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 10768 sizes 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 12507-2K sizes 8; 10; 13 mm‘

i Hexagon key wrenches10768-2Kwith 2-component T-handle, for socket head screws, with two tips,Chrome Vanadium, matt chrome plated, black tips.

‘


43252020 2 100 125 33 10 8.2043252025 2.5 100 125 42 10 8.4043252030 3 150 174 42 10 8.9043252040 4 150 176 51 10 10.901

43252050 5 200 227 73 10 11.4043252060 6 200 228 92 10 12.2043252080 8 200 235 178 5 16.0043252100 10 200 235 247 5 23.00‘

ES 10769/7

175 x 350 x 35 mm, 7 pieces‘

RCode g €‘

96838120 450 54.80‘

No 10769 sizes T10; T15; T20; T25; T27; T30;T40

‘

83812043 Empty tray 116 8.15‘

n TORX®-T-handled screwdrivers10769for inside TORX® screws,shaft nickel-plated and chrome plated, tips hardened,Chrome Vanadium, matt chrome plated, black tips.

‘


43290008 T8 2.3 80 96 10 5 5.4043290009 T9 2.5 80 96 10 5 5.6543290010 T10 2.7 100 116 10 5 5.7043290015 T15 3.3 100 116 20 10 5.701

43290020 T20 3.8 100 125 30 10 5.7543290025 T25 4.4 110 135 40 10 6.1543290027 T27 5 110 135 50 10 6.4043290030 T30 5.5 130 155 60 10 7.151

43290040 T40 6.6 130 165 100 10 9.8043290045 T45 7.8 130 165 120 10 10.5043290050 T50 8.8 130 165 140 5 11.90‘

Screwdrivers

6

212

TCS 10769+10771/17

xö

U350 x 350 x 30 mm, 17 pieces‘

RCode g €‘

96832099 730 138.70‘


‘


‘

ES 10769B/7

175 x 350 x 35 mm, 7 pieces‘

RCode g €‘

96838129 450 56.55‘

No 10769B sizes T10; T15; T20; T25; T27; T30;T40

‘

83812043 Empty tray 116 8.15‘

o TORX® screwdrivers with T-handle

10769B

with hollow point(TORX® TAMPER RESISTANT),shaft nickel-plated and chrome plated,tips hardened, Chrome Vanadium,matt chrome plated, black tips.

‘


43300010 T10 2.7 100 116 20 5 5.8543300015 T15 3.3 100 116 20 5 5.8543300020 T20 3.8 100 125 30 5 6.1543300025 T25 4.4 110 135 40 5 6.401

43300027 T27 5.0 110 135 50 5 6.8043300030 T30 5.5 130 155 50 5 7.4543300040 T40 6.6 130 165 100 5 9.9043300045 T45 7.8 130 165 110 5 10.30‘

Four-sided bradawl10757for punching and preparingleather, plastics and other softmaterials and for marking holesin wood to prevent wood screws slipping off the mark.

‘

L Blade RCode mm mm g S €‘

77591000 200 6 x 100 100 1 5.15‘

2

1

7

Pliers

214

STAHLWILLE pliers, cutters & wrenches

For accurate work and a powerful grip – with comfy-fit multi-component handles.

When you are working with pliers, your handneeds optimum support and pro tection in the places where the pressure exerted on the hand is felt most keenly – through ergonomic handledesign.

STAHLWILLE has integrated softer layers in thesesections of the handles. In this way, they fulfil two important functions. They prevent the handslipping off the handle and, at the same time,

Clean, effortless cutting!Thanks to specially hardened,high-precision cutters.

Strain-free working and longer tool lifetimes! Thanks to smooth-action lap-joints.

Prevents injuries! The anti-slip protection prevents your hands slippingoff towards the jaws.

Longer tool lifetime and resistance to aggressive fluids! Thanks to impact-resistant, extremely hard-wearing special plastic.

absorb the shock produced when hardwires are cut. Even with oily or greasyhands, the textured surface ensures you still havea good grip on things.

The special plastic we have used is also resistant to aggressive fluids and, at the end of the lifecycle, can be properly disposed of, because it does not contain PVC.

No pinch marks and strain-free working! The ergonomically positionedsofter layers improve forcetransmission.

Accurate cutting and gripping! By using high-gradematerials and applying our sophisticated manufacturingtechniques, we are able toachieve remarkably accurately

shaped jaws.

Voltage testingAll STAHLWILLE VDE pliersand cutters are tested to AC 10,000 volts and are certified up to 1,000 volts. In other words, with a tenfoldsafety margin.

The electrical insulationAfter being submerged inwater for 24 hours, the pliersand cutters are subjected to10,000 volts AC and, at thesame time, the leakage currentis measured for three minutes.There must be no dielectricbreakdown or arcing.

Testing the adherence of thePVC coatingThe handles must still be firmlyattached to the tools afterabout 168 hours in a heat cabinet at 70 °C. This strippingtest on the PVC covers is carried out for three minutes at 500 N.

Cold impact testsThe insulating handles aresubjected to 2 hours at –25°Cin a freezer and must still be tough enough not to shatteror break when knocked.

Testing resistance to fire The danger of fire can only becombatted through the use ofnon-flammable PVC. During thetest, the flame on the handlemust not exceed a height of 120 mm within 20 seconds.

STAHLWILLE VDE pliers & cutters

215

Pressure testsWhen they are subjected to a load of 20 N m and a temperature of 70 °C, theremust be no dielectric breakdown or arcing when the tools are subjected to 5,000 volts AC.

STAHLWILLE VDE pliers & cutters aremanufactured to meet the current demands of EN 60900 and are individually tested. They are designed toprovide maximum possible protectionwhen the user is working with voltagesof 1,000 volts AC.

Pliers

7

216

Combination Pliers

Combination pliers6501DIN ISO 5746, precision cutting edges for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.

‘

L RCode mm Head Handles e r t z g €‘

65013160 160 polished multi-component handles with softer layers 1.8 1.5 10 16 183 16.1065013180 180 2 1.8 12 16 250 16.9065013200 200 2.5 2 13 16 312 19.0065015160 160 chrome plated multi-component handles with softer layers 1.8 1.5 10 16 210 18.0065015180 180 2 1.8 12 16 250 19.2065015200 200 2.5 2 13 16 368 21.3065016160 160 polished dip-coated with sure-grip surface 1.8 1.5 10 16 163 12.3065016180 180 2 1.8 12 16 190 13.2065016200 200 2.5 2 13 16 263 15.20‘

e cutting capacity in mm for hard wirer cutting capacity in mm for piano wiret cutting capacity in mm for cablez cutting capacity in mm2 for cable‘

Flat Nose Pliers

Flat nose pliers, short6507DIN ISO 5745, short, flat serrated jaws.

‘

L L3 W D h b RCode mm Head Handles mm mm mm mm mm g €‘

65075160 160 chrome plated multi-component handles with softer layers 30 17 10 5 9 180 20.4065076160 160 polished dip-coated with sure-grip surface 30 17 10 5 9 151 17.00‘

Flat nose pliers, long6508DIN ISO 5745, long, flat serrated jaws.

‘


65085160 160 chrome plated multi-component handles with softer layers 50 15 8 3 5 160 21.5065086160 160 polished dip-coated with sure-grip surface 50 15 8 3 5 113 15.80‘

Flat nose pliers, long, with cutter6509

‘


65095160 160 chrome plated multi-component handles with softer layers 50 15 8 3 5 164 30.90‘

650161606501516065013160

65075160 65076160

65085160 65086160

designed for gripping and manipulating electroniccomponents, long, thin, flat serrated jaws, induction hardened cutting edges, approx. 60 HRC, for soft and hard wires.

7

217

Mechanics flat nose pliers6510designed for use in fine mechanical and electronicsindustries, flat, slim, long serrated jaws, box joint, for long life, serrated gripping areas.

‘


65105190 190 chrome plated dip-coated with sure-grip surface 75 13.5 8.5 2 4.5 128 28.40‘

Mechanics flat nose pliers6516designed for use by instrument mechanics, flat blunt, serrated jaws, wear resistant.

‘


65165200 200 chrome plated dip-coated with sure-grip surface 40 13.5 9.5 2.5 9.5 158 32.60‘

Relay pliers6511DIN 5235, Form A, flat pointed, for use on contactand relay springs and on small components,smooth jaws.

‘


65115135 140 chrome plated dip-coated with sure-grip surface 33 13 7.5 1 1.5 75 21.30‘

Relay pliers6512DIN 5235, Form B, flat blunt, for use on contactand relay springs and on small components,smooth jaws.

‘



Relay pliers6513DIN 5235, Form C, flat bent, 45° in line with jaws, for use on contact and relay springs and on smallcomponents, smooth jaws.

‘



Relay pliers6514DIN 5235, Form E, flat bent, 90° angle to jaws, for use on contact and relay springs and on smallcomponents, smooth jaws.

‘


65145135 140 chrome plated dip-coated with sure-grip surface 33 13 7.5 1 4 76 22.20‘

Pliers

7

218

Mechanics gripping pliers6518Form A, flat blunt, designed for use by instrumentmechanics, wide precision jaws, smooth, taperingto 1.5 mm, box joint for precise movement.

‘


65185130 130 chrome plated dip-coated with sure-grip surface 24 11.5 7 2 6.5 75 22.50‘

Mechanics gripping pliers6519Form B, flat pointed, designed for use byinstrument mechanics, flat pointed precision jaws,smooth, tapering to 1.5 mm, box joint for precisemovement.

‘


65195130 130 chrome plated dip-coated with sure-grip surface 24 11.5 7 1.5 2 72 22.50‘

Round Nose Pliers

Round nose pliers, short6523DIN ISO 5745, for bending wire loops andrings, short, round, ground jaws, fine serrationson gripping areas.

‘

L L3 W D b RCode mm Head Handles mm mm mm mm g €‘

65235160 160 chrome plated multi-component handles with softer layers 30 18 10 3 185 18.50‘

Round nose pliers, long6524DIN ISO 5745, for bending wire loops and rings,long, round, ground jaws, fine serrations ongripping areas.

‘


65245160 160 chrome plated multi-component handles with softer layers 47 15.5 8.5 2.5 155 21.10‘

Mechanics round nose pliers6525for bending wire loops, round precision jaws,smooth, 1.0 point diameter, box joint for precisemovement.

‘


65255130 130 chrome plated dip-coated with sure-grip surface 22 11.5 7 1 70 23.10‘

7

219

Snipe Nose Pliers

Snipe nose pliers with cutter (radio- or telephone pliers)6529DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.

‘


65293145 140 polished multi-component handles with softer layers 44 15 8 2.5 2 113 19.1065293160 160 51 16 9 3 2.5 155 20.7065293200 200 73 17 9 3 2.5 197 22.4065295145 140 chrome plated multi-component handles with softer layers 44 15 8 2.5 2 115 21.3065295160 160 51 16 9 3 2.5 170 23.9065295200 200 73 17 9 3 2.5 220 29.4065296145 140 polished dip-coated with sure-grip surface 44 15 8 2.5 2 92 15.1065296160 160 51 16 9 3 2.5 148 15.8065296200 200 73 17 9 3 2.5 187 21.10‘

Snipe nose pliers with cutter (radio- or telephone pliers)6530DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires, induction hardened cutting edges, approx. 60 HRC.

‘

L L2 L3 W D h b RCode mm Head Handles mm mm mm mm mm mm g €‘

65303160 160 polished multi-component handles with softer layers 24 55 16 9 3 2.5 170 22.7065303200 200 28 76 17 9 3.5 3 198 26.4065305160 160 chrome plated multi-component handles with softer layers 24 55 16 9 3 2.5 170 23.8065305200 200 28 76 17 9 3.5 3 220 29.0065306160 160 polished dip-coated with sure-grip surface 24 55 16 9 3 2.5 146 21.8065306200 200 28 76 17 9 3.5 3 178 23.50‘

6529616065293160 65295160

6530620065303200 65305200

Mechanics snipe nose pliers6531Form A (straight), designed for use on miniatureelectronic and mechanical components, haft round extra thin, long tapering jaws with fineserration, box joint for precise movement.

‘


65315170 170 chrome plated dip-coated with sure-grip surface 63 13.5 8 2.5 2 100 25.70‘

Mechanics snipe nose pliers6532Form B, bent 45°, designed for use on miniatureelectronic and mechanical components, half round extra thin, long tapering jaws with fineserrations, box joint for precise movement.

‘


65325170 170 chrome plated dip-coated with sure-grip surface 24 54 13.5 8 2.5 2 102 28.50‘

Pliers

7

220

Mechanics snipe nose pliers6533half round, long tapering, serrated jaws.

‘


65335160 160 chrome plated dip-coated with sure-grip surface 50 15 8 3 2.5 129 21.50‘

Mechanics snipe nose pliers6534Form A (straight), half round, long tapering,serrated jaws.

‘


65345200 200 chrome plated multi-component handles with softer layers 76 16 10 3 2.5 220 25.4065345280 280 chrome plated dip-coated with sure-grip surface 73 20 9.5 3 2.5 255 22.70‘

65345200 65345280

Mechanics snipe nose pliers6535Form B (bent 45°), half round, long tapering,serrated jaws.

‘


65355200 200 chrome plated multi-component handles with softer layers 28 68 17 9.5 3.5 3 220 27.8065355280 280 chrome plated dip-coated with sure-grip surface 28 66 20 9.5 3 2.5 255 26.80‘

Mechanics snipe nose pliers6538designed for use on miniature mechanicalcomponents, half round tapering jaws, wear resisting serration.

‘


65385200 200 chrome plated dip-coated with sure-grip surface 38 13 9.5 2.5 2 157 24.50‘

Snipe nose pliers (needle pliers)6536DIN ISO 9655, Form A (straight), designed foruse on electronic components, half round, extra long tapering jaws, fine serration.

‘


65365160 160 chrome plated dip-coated with sure-grip surface 58 15 8.5 3 1 110 24.90‘

65355200 65355280

7

221

Snipe nose pliers (needle pliers)6537Form B, bent 45°, designed for use on electroniccomponents, half round, extra long tapering jaws,fine serration.

‘


65375160 160 chrome plated dip-coated with sure-grip surface 25 54 14 8 1 3 115 26.40‘

Circlip Pliers

Circlip pliers for inside circlips6543DIN 5256 C, straight, H.D. drop forged, precision points.

‘

L tips for circlip sizes RCode size mm O mm mm Head Handles g €‘

65434000 J 0 140 0.9 8–13 matt chrome plated chrome plated, chequered 90 15.1065434001 J 1 140 1.3 12–25 90 15.6065434002 J 2 180 1.8 19–60 135 15.8065434003 J 3 225 2.3 40–100 195 18.7065434004 J 4 320 3.2 85–140 419 35.6065436000 J 0 140 0.9 8–13 polished dip-coated with sure-grip surface 100 13.5065436001 J 1 140 1.3 12–25 100 13.9065436002 J 2 180 1.8 19–60 150 14.2065436003 J 3 225 2.3 40–100 215 17.7065436004 J 4 320 3.2 85–140 462 32.00‘

Circlip pliers for inside circlips6544DIN 5256 D, bent 90°, H.D. drop forged, precision points.

‘


65444001 J 01 130 0.9 8–13 matt chrome plated chrome plated, chequered 90 15.1065444011 J 11 130 1.3 12–25 90 15.6065444021 J 21 170 1.8 19–60 135 17.5065444031 J 31 215 2.3 40–100 195 21.2065444041 J 41 300 3.2 85–140 416 40.5065446001 J 01 130 0.9 8–13 polished dip-coated with sure-grip surface 100 13.5065446011 J 11 130 1.3 12–25 100 13.9065446021 J 21 170 1.8 19–60 150 15.7065446031 J 31 215 2.3 40–100 215 19.1065446041 J 41 300 3.2 85–140 432 36.70‘

65434002 65436002

6544602165444021

Pliers

7

222

Circlip pliers for outside circlips6545DIN 5254 A, straight, H.D. drop forged, precisionpoints, with wear resistant compression spring.

‘


65454000 A 0 140 0.9 3–10 matt chrome plated chrome plated, chequered 95 17.5065454001 A 1 140 1.3 10–25 95 16.6065454002 A 2 180 1.8 19–60 145 17.0065454003 A 3 210 2.3 40–100 205 19.3065454004 A 4 315 3.2 85–140 437 38.8065456000 A 0 140 0.9 3–10 polished dip-coated with sure-grip surface 105 15.7065456001 A 1 140 1.3 10–25 105 15.0065456002 A 2 180 1.8 19–60 160 15.6065456003 A 3 210 2.3 40–100 232 17.3065456004 A 4 315 3.2 85–140 491 35.10‘

65454002 65456002

Circlip pliers for outside circlips6546DIN 5254 B, bent 90°, H.D. drop forged, precisionpoints, with wear resistant compression spring.

‘


65464001 A 01 125 0.9 3–10 matt chrome plated chrome plated, chequered 95 19.4065464011 A 11 125 1.3 10–25 95 17.0065464021 A 21 170 1.8 19–60 145 19.1065464031 A 31 200 2.3 40–100 111 21.4065464041 A 41 290 3.2 85–140 431 41.1065466001 A 01 125 0.9 3–10 polished dip-coated with sure-grip surface 105 17.5065466011 A 11 125 1.3 10–25 105 15.6065466021 A 21 170 1.8 19–60 160 17.0065466031 A 31 200 2.3 40–100 236 19.3065466041 A 41 290 3.2 85–140 468 37.10‘

Special circlip pliers for slotted circlips6547for slotted circlips (as used on shafts of engines,gearboxes, differentials, clutches etc.), with wearresistant compression spring.

‘

L RCode mm Head Handles g €‘

65474170 170 matt chrome plated chrome plated, chequered 154 28.3065476170 170 polished dip-coated with sure-grip surface 162 26.10‘

65464021 65466021

65474170 65476170

7

223

Waterpump Pliers

Waterpump pliers6551DIN ISO 8976 (No 207 c), box joint, 7 adjustment positions (175 mm 6 adjustmentpositions), anti-squeeze protection, Chrome Vanadium.

‘

L Jaw opening RCode mm max. mm Head Handles g €‘

65515240 240 43 chrome plated multi-component handles with softer layers 365 25.0065516175 175 26 black lacquered, jaws polished black lacquered, box frame polished, dip-coated 173 14.2065516240 240 43 330 16.0065516300 300 51 520 25.10‘

65515240 65516175

65726240

Waterpump pliers FastGRIP6572registered design, box joint with dual support, fast adjustment on the work piece via pushbutton, freely adjustable, easy super fineadjustment with 10 snap-in points (180 mm), 12 snap-in points (240 mm), 15 snap-in points(300 mm), induction hardened jaw toothing –extremely hard and durable, safety clampingprotection against squeezing injuries, Chrome Vanadium.‘


65726180 180 28 polished dip-coated with sure-grip surface 221 24.5065726240 240 37 393 26.0065726300 300 44 526 35.00‘

PowerGRIP pliers wrench6573box joint, fast adjustment via button pressdirectly on the work piece, freely adjustable,easy super fine adjustment, high transmissionratio for noticeable amplification of manualforce, for work pieces with parallel surfaces(nuts, screws etc.), also ideal for bending thinparallel work pieces (e.g. metal sheet), paralleljaws without profile to protect surface coated work pieces, “Ratchet effect” for screws by using the jaw stroke, extremely resistant overall construction, high quality tempered.

‘


65735180 192 36 chrome plated dip-coated with sure-grip surface 275 51.0065735250 253 46 490 57.5065735300 300 60 640 68.50‘

65735300

Waterpump pliers, with rapid adjustment6554DIN ISO 8976 (No 207 c), box joint “hook”adjustment, jaw with slot, Chrome Vanadium.

‘


65544250 250 1) 50 chrome plated chrome plated, chequered 476 49.2065544375 375 70 1066 85.00‘

1) anti-squeeze protection‘

Spare springs for No 6554‘

RCode Spare spring for No g €‘

69540002 65544250 3 1.8569540003 65544375 4 2.60‘

65544250

Pliers

7

224

MINI-waterpump pliers6555Chrome Vanadium.

‘


65555125 125 15 chrome plated dip-coated 78 16.20‘

Pipe wrenches6549Type B, 45°, DIN 5234.

‘

L Jaw opening RCode size mm max. mm Head Handles g €‘

65490315 1 326 45 red lacquered red lacquered 715 46.0065490420 1 1/2 440 61 1300 64.5065490555 2 560 82 2780 93.50‘

Swedish pattern wrenches6556Type A, 90°, DIN 5234.

‘



S-shaped Swedish pattern wrenches6557Type C, DIN 5234.

‘



“Heavy Duty” pipe wrenches6558US-standard GGG-W-651 Type II, category A.

‘


65580250 10'' 250 49 black lacquered red lacquered 805 25.5065580300 12'' 300 61 1255 29.6065580350 14'' 350 61 1655 33.9065580450 18'' 450 77 2660 48.2065580600 24'' 600 90 4295 75.50‘

65490315

65560310

65570320

65580300

7

225

“Stillson” pipe wrenches6559US-standard GGG-W-651 Type I, category A.

‘


65590250 10'' 250 35 black lacquered red lacquered 550 22.9065590300 12'' 300 43 750 26.2065590350 14'' 350 49 1080 31.3065590450 18'' 450 61 1850 42.5065590600 24'' 600 77 3000 68.50‘

Self Grip WrenchesWide jaw self grip wrench6561

80 mm jaw width, quick release lever, Chrome Vanadium.

‘

L S RCode mm mm Head Handles g €‘

65612175 175 20 bright nickel-plated bright nickel-plated 364 38.70‘

Parallel jaw self grip wrench6562forged jaws, quick release lever, Chrome Vanadium.

‘



65590250

Parallel jaw self grip wrenches6562/16562/2

forged jaws, quick release lever, for small roundparts (V-cutout in one jaw) and also suitable forlarger workpieces, also ideal for gently grippingsensitive workpieces, Chrome Vanadium.

‘


65622100 250 100 bright nickel-plated bright nickel-plated 985 80.5065622200 250 200 1154 85.00‘

Plastic protective jaws for parallel jaw self grip wrenches No 6562/1 and No 6562/21 pair, provides additional protection for clamped workpieces.‘

RCode g €‘

69620001 14 5.45‘

6562/1 6562/2

Pliers

7

226

Universal self grip wrenches6563forged jaws (one straight, one contoured), quick release lever, Chrome Vanadium.

‘



Self grip wrenches6564forged contoured jaws, quick release lever, wire cutter, Chrome Vanadium.

‘


65642145 145 14 bright nickel-plated bright nickel-plated 175 17.2065642175 175 30 323 20.3065642250 250 40 550 21.6065642300 300 65 977 42.10‘

Welders self grip wrench6565with quick release lever, Chrome Vanadium.

‘



Pipe welders self grip wrench6566with quick release lever, Chrome Vanadium.

‘



C-Clamp self grip wrenches6567with quick release lever, Chrome Vanadium.

‘



65632175

65642175

65672280

7

227

Long reach grip wrenches6568extra large capacity, quick release lever, Chrome Vanadium.

‘



65682460

65751220 65751280

Long nose self grip wrench6571specially suitable for narrow, tapering access, with quick-release lever, Chrome Vanadium.

‘



Various Gripping Pliers

Wire twisting pliers6575registered design, for wire locking of metalfasteners, with side cutter, serrated jaws forpositive grip, jaws angled by 40°, suitable forlocking wires up to O 1.6 mm (dec. in. 0.06), for clockwise and anticlockwise use, with automatic return action, Chrome Vanadium.

‘


65751220 230 gunmetal finish, polished gunmetal finish 330 129.0065751280 280 410 145.00‘

Connector pliers6576Nreplaceable plastic jaws, 4 adj. positions, for useon screw connections incl. Canon-connectors, or any light alloy or other tube connections,surfaces of which must not be damaged, Chrome Vanadium.

‘


65765231 230 chrome plated dip-coated 288 49.60‘

Loose plastic jaws for No 6576N‘

RCode g €‘

69760001 3 6.65‘

Pliers

7

228

Side Cutters

Side cutters N6600DIN ISO 5749, Form B, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.

‘

L e h b RCode mm Head Handles mm mm mm q w e r g €‘

66003130 125 polished multi-component handles with softer layers 24 17 8.6 2.8 2.3 1.5 1.25 110 19.7066003145 140 25.7 18.5 8.2 3 2.5 1.8 1.6 147 21.4066003160 160 29.5 22.5 9.5 3 2.8 2 1.6 188 21.8066003180 180 32 23.5 11 3.8 3 2.5 2 252 23.0066005130 125 chrome plated multi-component handles with softer layers 24 17 8.6 2.8 2.3 1.5 1.25 105 20.4066005145 140 25.7 18.5 8.2 3 2.5 1.8 1.6 160 21.8066005160 160 29.5 22.5 9.5 3 2.8 2 1.6 205 22.8066005180 180 32 23.5 11 3.8 3 2.5 2 325 24.3066006130 125 polished dip-coated with sure-grip surface 24 17 8.6 2.8 2.3 1.5 1.25 100 19.1066006145 140 25.7 18.5 8.2 3 2.5 1.8 1.6 121 20.0066006160 160 29.5 22.5 9.5 3 2.8 2 1.6 165 17.8066006180 180 32 23.5 11 3.8 3 2.5 2 205 19.40‘

q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wiree Cutting capacity in mm for hard wire r Cutting capacity in mm for piano wire‘

Side cutter M6601as No 6600, mini bevel, fitted with double leaf spring.

‘


66016110 110 polished dip-coated with sure-grip surface 15 15 8.5 2.5 1.5 1.2 0.8 69 17.50‘


66005160 6600616066003160

Heavy duty side cutters N6602

‘


66023140 140 polished multi-component handles with softer layers 23.5 20 9 4 3.1 2 1.5 156 24.2066023160 160 25.5 25 9.5 4 3.4 2.5 2 203 25.9066023180 180 27.5 26.5 10.5 4 3.8 2.7 2.2 251 27.4066023200 200 31 28 11.5 4 4 3 2.5 305 29.2066023250 250 32 29.5 12 4 4 3.5 3 407 33.9066025140 140 chrome plated multi-component handles with softer layers 23.5 20 9 4 3.1 2 1.5 145 29.0066025160 160 25.5 25 9.5 4 3.4 2.5 2 200 31.2066025180 180 27.5 26.5 10.5 4 3.8 2.7 2.2 290 32.8066025200 200 31 28 11.5 4 4 3 2.5 310 34.6066025250 250 32 29.5 12 4 4 3.5 3 400 37.7066026140 140 polished dip-coated with sure-grip surface 23.5 20 9 4 3.1 2 1.5 140 22.3066026160 160 25.5 25 9.5 4 3.4 2.5 2 170 23.2066026180 180 27.5 26.5 10.5 4 3.8 2.7 2.2 230 24.4066026200 200 31 28 11.5 4 4 3 2.5 260 25.4066026250 250 32 29.5 12 4 4 3.5 3 375 25.90‘


6602620066023200 66025200

DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened, approx. 63 HRC.

7

229

Lever action side cutters6608DIN ISO 5749, for piano wire, special steel.

‘

L RCode mm Head Handles w r g €‘

66080190 190 polished black lacquered 3.7 3 510 46.9066080225 225 4.2 3.5 555 52.00‘

w Cutting capacity in mm for medium hard wire r Cutting capacity in mm for piano wire‘

Oblique Cutter

Mechanics oblique cutter M6612suitable for use on miniature mechanical andelectronic components, precision cutting edgesfor hard and soft wire, head angled by 28°,Cu-wire 0.25 mm O may be cut at tips, alloy steel of highest quality, induction hardenedmini-bevelled cutting edges, approx. 60 HRC.

‘

L e h b RCode mm Head Handles mm mm mm q w e g €‘

66125185 185 chrome plated dip-coated with sure-grip surface 14 13.5 9.5 2 1.8 1.5 145 26.60‘

q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire e Cutting capacity in mm for hard wire‘

Top Cutters

Top cutters, heavy duty N6618DIN ISO 5748, precision cutting edges for allwires, incl. piano wire, alloy steel of highestquality, induction hardened bevelled cuttingedges, approx. 63 HRC.

‘

L e h b1 b2 RCode mm Head Handles mm mm mm mm q w e r g €‘

66185160 160 chrome plated multi-component handles with softer layers 17 26 11.5 24 3.8 3 2.5 2 240 32.7066186160 160 polished dip-coated with sure-grip surface 17 26 11.5 24 3.8 3 2.5 2 225 27.40‘


66080190

66185160 66186160

Lever action top cutters6617DIN ISO 5748, for piano wire, special steel.

‘

L RCode mm Head Handles q w e r g €‘

66170180 180 polished black lacquered 3.5 3 2.5 2.25 394 53.5066170215 215 4 3.5 2.8 2.5 440 58.0066170235 235 4 3.5 3 2.75 467 74.50‘


66170215

Pliers

7

230

Wire Stripping Pliers

Wire stripping pliers6622with adjustment screw to cut insulation only onwire or cable, max. 5 mm O 10 mm2 conductorcross-section.

‘


66225160 160 chrome plated multi-component handles with softer layers 195 23.3066226160 160 polished dip-coated with sure-grip surface 180 20.40‘

Wire stripping pliers6623for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel.

‘


66235160 160 chrome plated multi-component handles with softer layers 180 47.00‘

Replacement stripping knives (1 pair) for No 6623‘

RCode g €‘

69230001 11 15.50‘

Wire stripping pliers6624for wires from 0.3 to 1.2 mm O, self adjusting,cutter hole for cutting wire or stranded wires up to 5 mm O, special alloy steel.

‘


66245160 160 chrome plated multi-component handles with softer layers 186 47.20‘

Cable Shear

Cable shear6630

for copper- and light alloy cables. Easy, singlehanded operation. Special cutting edgesgeometry to avoid pressure marks and frayedends, adjustable joint, anti-squeeze protection,not suitable for steel- or armoured cables.

‘

L RCode mm Head Handles u i o g €‘

66305220 220 chrome plated dip-coated with sure-grip surface 16 35 70 332 50.00‘

u cutting capacity in mm2 for single wire Al-/Cu-Cablei cutting capacity in mm2 for multiple wire Al-/Cu-Cableo cutting capacity in mm2 for thin wire Al-/Cu-Cable‘

66225160 66226160

7

231

Crimping Pliers

Crimping pliers6634with half round profile, for reliable crimping of terminalsleeves DIN 46228, 8 deep slots with tapering sidewalls, crimping within the size marked profiles in oneoperation.

‘

L crimping range RCode mm Head Handles mm2 g €‘

66346220 220 gunmetal finish dip-coated with sure-grip surface 0.25; 0.5; 0.75; 1; 1.5; 2.5; 4; 6; 10; 16 240 55.50‘

Crimping pliers U6637for use with terminal sleeves with or without aninsulating collar in accordance with DIN 46228• high precision crimping• easy-action force transmission coupled with simplehandling

• unlockable autolock• accurately ground profiles• crimp shape: 1‘


66370195 195 gunmetal finish with plastic sleeves 0.08 - 10 298 180.00‘

Crimping pliers U6638for red/blue/yellow insulated cable lugs, pin-typecable lugs, flat plugs and sleeves, round plugs andsleeves, butt and parallel connectors• unlockable autolock• easy handling• stripping and cutting device, refer to No 6966• crimp shape: 5

‘


66380220 220 gunmetal finish with plastic sleeves red = 0.5–1(AWG 20–18); blue = 1.5–2.5 (AWG 16–14); yellow = 4–6 (AWG 12–10) 477 106.00

‘

Crimping pliers U6639for non-insulated flat plugs and flat sleeves fornominal DIN widths F2.8; F4.8; F6.3; F9.5• unlockable autolock• easy handling• stripping and cutting device, refer to No 6966• crimp shape: 2

‘


66390220 220 gunmetal finish with plastic sleeves 0.25–0.5 (AWG 24–20); 0.5–1 (AWG 20–18); 4–6 (AWG 12–10); 1.5–2.5 (AWG 16–14) 483 106.00

‘

Crimping pliers U6640for non-insulated cable lugs and tubular cable lugswith closed crimp sleeves• unlockable autolock• easy handling• stripping and cutting device, refer to No 6966• crimp shape: 3

‘


66400220 220 gunmetal finish with plastic sleeves 0.1–0.35 (AWG 26–22); 0.5–1 (AWG 20–18); 1.5–2.5 (AWG 16–14); 4–6 (AWG 12–10); 10–16 (AWG 8–6) 465 106.00

‘

Pliers

7

232

Crimping pliers U6641for use with terminal sleeves with or without an insulatingcollar in accordance with DIN 46228• unlockable autolock• easy handling• stripping and cutting device, refer to No 6966• crimp shape: 4

‘


66410220 220 gunmetal finish with plastic sleeves 0.14–0.5; 0.75–1.5; 2.5; 4; 6; 10; 16 536 110.00‘

Stripping and cutting tool U6966for stripping wires from 0.5 to 6 mm O. Cables can also be cut. For use with crimping pliers No 6638, 6639, 6640 and 6641.

‘

RCode g €‘

69660000 37 36.30‘

Various Cutting Pliers

Steel fixers pincers6660DIN ISO 9242, limit on opening angle to ensuresingle-handed closure (registered design), littleeffort required due to optimised cutter geometry,induction-hardened cutters provide excellentresistance to wear, special steel, drop-forged, oilhardened

‘


66601220 224 polished black lacquered 318 15.8066601250 250 420 17.9066601280 280 434 20.30‘

Pincers6661DIN ISO 9243, special steel, drop-forged, oil hardened.

‘


66611180 180 polished black lacquered 322 13.8066611200 200 419 14.40‘

Heavy Duty steel fixer pincers6662DIN ISO 9243, induction-hardened cutting edges,high wear resistance, extremely low cutting forceeffort due to very large lever effect and optimumcutting edges geometry. Clearly damped cuttingshock due to “elastic” pliers body, therefore ideal for continuous use special steel. Ultra-slim design, ideal for binding recessed reinforcing bars. Special steel, drop-forged, oil hardened.

‘


66624300 300 chrome plated, polished chrome plated 475 28.90‘

7

233

Set with 4 pliers, chrome plated6702Handles chequered, in plastic inlay

Content:6543 Circlip pliers, J26544 Circlip pliers, J216545 Circlip pliers, A26546 Circlip pliers, A21‘

RCode g €‘

96650004 590 69.40‘

Set with 3 pliers, polished6706dip-coated, in plastic inlay

Content:6501 Combination pliers, 180 mm6602 Heavy duty side cutter,

160 mm6529 Snipe nose pliers, 200 mm

‘

RCode g €‘

96650008 750 57.50‘

Set with 3 pliers, chrome plated6703multi-component handles withsofter layers, in plastic inlay

Content:6501 Combination pliers, 180 mm6602 Heavy duty side cutter,

160 mm6529 Snipe nose pliers, 200 mm‘

RCode g €‘

96650005 810 79.80‘

Set with 3 pliers, polished6705dip-coated, in plastic inlay

Content:6551 Waterpump pliers, 240 mm,

lacquered6501 Combination pliers, 180 mm6602 Heavy duty side cutter,

160 mm

‘

RCode g €‘

96650007 880 52.40‘

Set with 3 pliers, chrome plated6704multi-component handles withsofter layers (No 6501, 6602), in plastic inlay

Content:6551 Waterpump pliers, 240 mm6501 Combination pliers, 180 mm6602 Heavy duty side cutter,

160 mm

‘

RCode g €‘

96650006 950 66.40‘

Sets of pliers in plastic inlays alsosuitable for Workbench No 92KM G, Tool trolleys 97N, 97N/KM, 97H/8,97H/KM, Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N (Modular system see page 33–59)

ES 6501–6602/7A

530 x 350 x 40 mm, 7 pieces‘

RCode g €‘

96838121 2085 172.70‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

83812021 Empty tray 307 22.50‘

ES 6501–6602/7B

530 x 350 x 40 mm, 7 pieces‘

RCode g €‘

96838132 2055 169.30‘

No 65 01 5 200‘

No 65 29 5 160‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

83812021 Empty tray 307 22.50‘

Pliers

7

234

TCS 6501–6602/4


RCode g €‘

96838179 1010 114.40‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 51 6 240‘

No 66 02 5 160‘

TCS 6501–6602/4N


RCode g €‘

96830622 1080 128.30‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 72 6 240‘

No 66 02 5 160‘

TCS 6543–6564/3


RCode g €‘

96838180 815 73.00‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 64 2 250‘

TCS 6543–6546/4


RCode g €‘

96830608 626 88.00‘

No 65 43 4 002‘

No 65 44 4 021‘

No 65 45 4 002‘

No 65 46 4 021‘

TCS 6534–6545/6

xö

U350 x 350 x 30 mm, 6 pieces‘

RCode g €‘

96832100 1070 147.80‘

No 65 34 5 280‘

No 65 35 5 200‘

No 65 43 4 001No 65 43 4 001

‘

No 65 45 4 001No 65 45 4 002

‘

7

235

Electronics Pliers, suitable for electrostatic discharge (ESD) applications Z

Electronics flat nose pliers Z6517

‘


65176120 125 polished dip-coated with sure-grip surface, ESD applications 20 9 6.5 1.5 3 48 22.40‘

Electronics round nose pliers Z6526

‘


65266120 125 polished dip-coated with sure-grip surface, ESD applications 22 9 6.5 1.25 45 24.40‘

Electronics snipe nose pliers Z6540

‘


65406120 125 polished dip-coated with sure-grip surface, ESD applications 21 9 6.5 1 1 50 22.80‘

Electronics side cutter ZM6603

‘


66036115 115 polished dip-coated with sure-grip surface, ESD applications 14 11 6.5 1.5 1 0.8 0.5 60 20.70‘


Electronics side cutter ZM6605

‘


66056110 112 polished dip-coated with sure-grip surface, ESD applications 13 10.5 7 1.5 1 0.8 0.6 64 31.50‘


DIN ISO 9655, designed for use on miniatureelectronic and mechanical components, weldedon double leaf spring, precision jaws, smooth,tapering to 1 mm, box joint for precise movement.

DIN ISO 9655, designed for use on miniatureelectronic and mechanical components, welded on double leaf spring, round precisionjaws, smooth, thin, 1.25 mm point diameter, box joint for precise movement.

DIN ISO 9655, designed for use on miniatureelectronic and mechanical components, welded on double leaf spring, half round, smooth precision jaws tapering to 1 mm O, box joint for precise movement.

strong, slim pattern, suitable for use on miniatureelectronic components, precision cutting edges,mini bevel, suitable for soft and hard wire, incl.piano wire, Cu-wire of 0.2 mm O can be cut at thetips, welded on double leaf spring, alloy steel ofhighest quality, induction hardened cutting edgesapprox. 63 HRC.

DIN ISO 9654, with wire catch to preventuncontrolled disposal of off-cuts, box joint forprecise movement, precision cutting edges, mini bevel, suitable for soft and hard wire, welded on double leaf spring, alloy steel ofhighest quality, induction hardened cutting edges,approx. 63 HRC.

Pliers

7

236

Electronics side cutters ZM6606

‘


66066110 112 polished dip-coated with sure-grip surface, ESD applications 13 12 7.5 1.5 1 0.8 0.6 66 27.2066066130 125 18 16 10 1.7 1.2 1 0.8 104 29.20‘


DIN ISO 9654, strong model, box joint for precisemovement, precision cutting edges, mini bevel,suitable for piano wire, Cu-wire 0.25 mm O can be cut at tips, welded on double leaf spring, alloy steel of highest quality, induction hardenedcutting edges, approx. 63 HRC.

Electronics side cutters ZL6607

‘

L e h b RCode mm Head Handles mm mm mm q w g €‘

66076110 112 polished dip-coated with sure-grip surface, ESD applications 13 12 7.5 1.5 1 64 28.5066076130 125 18 16 10 1.5 1 104 30.10‘

q Cutting capacity in mm for soft wire w Cutting capacity in mm for medium hard wire‘

Mini-electronics side cutter ZM6604DIN ISO 9654, light, slim pattern, especiallysuitable for use on miniature electroniccomponents, precision cutting edges, mini bevel,suitable for soft and hard wire, Cu-wire of 0.2 mmO can be cut at the tips, welded on double leafspring, alloy steel of highest quality, inductionhardened cutting edges, approx. 63 HRC.

‘


66046110 112 polished dip-coated with sure-grip surface, ESD applications 11 9 6 1 0.8 0.6 0.4 47 20.60‘


Electronics oblique cutter ZM6613

‘


66136115 112 polished dip-coated with sure-grip surface, ESD applications 11 11 7.5 10.5 1 0.8 0.6 0.4 54 24.90‘


DIN ISO 9654, slim tapered head for use inconfined spaces, box joint for precise movement,precision cutting edges, no bevel suitable for flushcutting of soft and medium hard wire, Cu- anddiode wires, welded on double leaf spring, alloysteel of highest quality, induction hardened cuttingedges, approx. 63 HRC.

DIN ISO 9654, tapered head for use in confinedspaces, precision cutting edges for hard and soft wire, head angled by 55°, Cu-wire 0.25 mm Omay be cut at the tips, welded on double leafspring, alloy steel of highest quality, inductionhardened mini-bevelled cutting edges, approx. 62 HRC.

7

237

Electronics oblique cutter ZL6614DIN ISO 9654, as No 6613, but without bevelled cuttingedges, for flush cutting of soft and medium hard Cu- anddiode wires.

‘

L e h b1 b2 RCode mm Head Handles mm mm mm mm q w g €‘

66146115 112 polished dip-coated with sure-grip surface, ESD applications 11 11 7.5 10.5 1 0.6 55 24.90‘


Electronics oblique cutter ZM6615DIN ISO 9654, slim, extended head for delicate cuts in confined spaces, box joint for precise movement,precision cutting edges with mini bevel for Cu- anddiode wires, head angled by 30°, welded on double leaf spring, alloy steel of highest quality.

‘

L L2 L3 h b RCode mm Head Handles mm mm mm mm q w g €‘

66156115 112 polished dip-coated with sure-grip surface, ESD applications 8 18 8 6 0.6 0.3 47 32.00‘


Electronics top cutter ZM6619

‘

L e W h b1 b2 RCode mm Head Handles mm mm mm mm mm q w g €‘

66196115 112 polished dip-coated with sure-grip surface, ESD applications 15.5 8.5 5.5 6 5 0.6 0.3 65 29.00‘


Electronics top cutter ZM6620

‘


66206115 112 polished dip-coated with sure-grip surface, ESD applications 6.5 11 7.5 11 1 0.8 0.6 0.4 82 25.40‘


Electronics top cutter ZL6621

‘

L e h b1 b2 RCode mm Head Handles mm mm mm mm q w g €‘

66216115 112 polished dip-coated with sure-grip surface, ESD applications 6.5 11 7.5 11 1 0.6 82 25.40‘


DIN ISO 9654, slim long head for use in confinedspace, box joint for precise movement, precisioncutting edges for Cu- and diode wires, mini-bevel,welded on double leaf spring, alloy steel of highestquality.

DIN ISO 9654, precision cutting edges for soft and hardwires, mini-bevel, head angled 90°, pointed head, Cu-wire0.25 mm O may be cut at the tips, welded on double leafspring, alloy steel of highest quality, induction hardenedcutting edges, approx. 60 HRC.

DIN ISO 9654, as No 6620, but without bevelled cuttingedge, for flush cutting of soft and medium hard Cu- anddiode wires, alloy steel of highest quality, induction hardenedcutting edges, approx. 60 HRC.

Pliers

7

238

VDE Pliers

6501DIN ISO 5746, precision cutting edges for allwires, incl. piano wire, induction hardenedcutting edges, approx. 62 HRC, for long life.

‘

L RCode mm Head Handles e r t z g €‘

65017160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 1.8 1.5 10 16 202 29.0065017180 180 2 1.8 12 16 279 30.8065017200 200 2.5 2 13 16 359 34.2065018160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 1.8 1.5 10 16 186 25.0065018180 180 2 1.8 12 16 186 26.6065018200 200 2.5 2 13 16 317 28.80‘

e cutting capacity in mm for hard wire r cutting capacity in mm for piano wiret cutting capacity in mm for cable z cutting capacity in mm2 for cable‘

Flat nose pliers, short6507DIN ISO 5745, short, flat serrated jaws.

‘


65077160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 30 17 10 5 9 200 31.1065078160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 30 17 10 5 9 181 27.20‘

Flat nose pliers, long6508DIN ISO 5745, long, flat serrated jaws.

‘


65087160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 50 15 8 3 5 148 36.8065088160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 50 15 8 3 5 166 31.10‘

Round nose pliers, short6523DIN ISO 5745, for bending wire loops and rings,short, round, ground jaws, fine serrations ongripping areas.

‘


65237160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 30 18 10 3 201 27.7065238160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 30 18 10 3 176 23.80‘

65017160

65077160 65078160

65087160 65088160

65018160

65237160 65238160

Round nose pliers, long6524DIN ISO 5745, for bending wire loops and rings,long, round, ground jaws, fine serrations ongripping areas.

‘


65247160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 47 15.5 8.5 2.5 162 29.6065248160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 47 15.5 8.5 2.5 156 25.30‘

65247160 65248160

Combination pliers

7

239

Snipe nose pliers with cutter (radio- or telephone pliers)6529DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole,precision cutting edges for soft and hard wires,induction hardened cutting edges, approx. 60 HRC.

‘


65297160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 51 16 9 3 2.5 174 34.8065297200 200 73 17 9 3 2.5 226 42.1065298160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 51 16 9 3 2.5 158 28.5065298200 200 73 17 9 3 2.5 202 31.30‘

Snipe nose pliers with cutter (radio- or telephone pliers)6530DIN ISO 5745, Form B, bent 45°, half round, long tapering, serrated jaws, with burner hole,precision cutting edges for soft and hard wires,induction hardened cutting edges, approx. 60 HRC.

‘


65307160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 24 55 16 9 3 2.5 185 42.7065307200 200 28 76 17 9 3.5 3 230 47.5065308160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 24 55 16 9 3 2.5 154 33.9065308200 200 28 76 17 9 3.5 3 201 35.40‘

Mechanics snipe nose pliers6533half round, long tapering, serrated jaws.

‘


65337160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 50 15 8 3 2.5 147 31.4065338160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 50 15 8 3 2.5 160 25.50‘

65297160 65298160

65307160 65308160

65337160 65338160

Side cutters N6600DIN ISO 5749, Form B, precision cutting edges forall wires incl. piano wire, high quality alloy steel,bevelled cutting edges induction hardened,approx. 63 HRC.

‘


66007145 140 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 19 20 8.2 3 2.5 1.8 1.6 155 27.1066007160 160 23.5 20 9 3 2.8 2 1.6 215 28.5066007180 180 25.5 25 9.5 3.8 3 2.5 2 270 31.7066008145 140 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 19 20 8.2 3 2.5 1.8 1.6 149 23.2066008160 160 23.5 20 9 3 2.8 2 1.6 190 24.7066008180 180 25.5 25 9.5 3.8 3 2.5 2 249 27.70‘


66007160 66008160

Pliers

7

240

Heavy duty side cutters N6602DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloysteel, bevelled cutting edges induction hardened,approx. 63 HRC.

‘


66027160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 25.5 25 9.5 4 3.4 2.5 2 220 36.9066027200 200 31 28 11.5 4 4 3 2.5 325 45.8066027250 250 32 29.5 12 4 4 3.5 3 475 50.5066028160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 25.5 25 9.5 4 3.4 2.5 2 210 31.0066028180 180 27.5 26.5 10.5 4 3.8 2.7 2.2 250 38.5066028200 200 31 28 11.5 4 4 3 2.5 305 40.20‘


Wire stripping pliers6622with adjustment screw to cut insulation only onwire or cable, max. 5 mm O 10 mm2 conductorcross-section.

‘


66227160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 180 42.6066228160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 168 36.90‘

Wire stripping pliers6623for wires from 0.5 to 5 mm O, self adjusting, cutter hole for cutting wire or stranded wires up to 5 mm O, special steel.

‘


66237160 160 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 214 54.5066238160 160 chrome plated insulated, with plastic sleeves, DIN EN 60900 T AC/1000 V 184 49.50‘

Replacement stripping knives (1 pair) for No 6623‘

RCode g €‘

69230001 11 15.50‘

Cable shear6630for copper and light alloy cables. Easy, singlehanded operation. Special cutter geometry toavoid pressure marks and frayed ends, adjustablejoint, anti-squeeze protection, not suitable forsteel or armoured cables.

‘

L RCode mm Head Handles u i o g €‘

66307220 220 chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V 16 35 70 380 69.00‘

u cutting capacity in mm2 for single wire Al-/Cu-Cable i cutting capacity in mm2 for multiple wire Al-/Cu-Cableo cutting capacity in mm2 for thin wire Al-/Cu-Cable‘

66027200 66028200

66227160 66228160

66237160 66238160

7

241

Plastic side-cutters

Plastic side-cutter L6670for plastic injection mouldings, with particularly narrow, straight cuttingedges, with no bevel to enable flush trimming of sprues and burrs, only for thin sprues made of soft thermoplastic, with spring-loadedopening, induction-hardened cutting edges.

‘

L e h b RCode mm Head Handles mm mm mm g €‘

66706120 120 polished dip-coated with 13 11 7 56 22.10sure-grip surface

‘

Plastic side-cutter L6671for plastic injection mouldings, with particularly narrow, straight cuttingedges, 45° angled, with no bevel to enable flush trimming of sprues andburrs, only for thin sprues made of soft thermoplastic, with spring-loadedopening, induction-hardened cutting edges.

‘



‘

Plastic side-cutters L6672for plastic injection mouldings, with straight cutting edges, 20° angled, withno bevel to enable flush trimming of sprues and burrs, with spring-loadedopening, induction-hardened cutting edges.

‘


66726130 130 polished dip-coated with 22 16 9 107 20.4066726145 145 sure-grip surface 25 17 10 120 20.8066726160 160 28 18 10 161 21.10‘

Plastic side-cutters L6673for plastic injection mouldings, with raised cutting edges, 20° angled, withno bevel to enable flush trimming of sprues and burrs, with spring-loadedopening, induction-hardened cutting edges.

‘


66736130 130 polished dip-coated with 22 17 8.5 107 19.7066736145 145 sure-grip surface 23 18 9.5 119 21.0066736160 160 28 18 10.5 165 21.60‘

Plastic side-cutter L6674for plastic injection mouldings, with convex cutting edge, with no bevel toenable flush trimming of sprues and burrs, with spring-loaded opening,induction-hardened cutting edges.

‘



‘

Plastic side-cutters L6676For plastic injection mouldings, with straight cutting edges, 30° angled,with no bevel to enable flush trimming of sprues and burrs, with spring-loaded opening, induction-hardened cutting edges.

‘


66766130 130 polished dip-coated with 19 16.5 8.5 105 21.5066766145 145 sure-grip surface 21 18.5 9.5 125 22.9066766160 160 28 20 11 182 23.30‘

Plastic side-cutter L6677for plastic injection mouldings, with straight cutting edges, 90° angled, withno bevel to enable flush trimming of sprues and burrs, with spring-loadedopening, induction-hardened cutting edges.

‘



‘




7

3

1

8

Pipe cutters, Hammers,Chisels, Files, Miscellaneous tools

EXPRESS Pipe Cutter No 150Ideal for pipes made of steel, copper, brass, light alloy andhard plastics. This tool is available in four sizes to cover outerdiameters from 6 to 90 mm.

Essential product advantages when cutting pipes withSTAHLWILLE pipe cutters:

Straight-line cuttingSTAHLWILLE EXPRESS pipe cutters ensure a perfectly perpendicular cut. The broad support rolls ensure that thecutting wheels are accurately guided throughout the cut. In this way, the cut cannot run off at an angle on the pipe surface or enter the pipe at a tilted angle. The robust dropforged upper-jaw section with its reinforced cutter-wheel guides prevents spiral cuts.

Deburring and chamferingThe wide guide rolls flatten the burr created during the cutting process back into the material. Separate deburring is not required. The cut-to-length pipe is automatically chamfered and can be passed directly to the next processingstep. The cut edge is angled in accordance with the cuttingwheel geometry.

Universally applicable – Work on pipes in situSTAHLWILLE EXPRESS pipe cutters can also be equippedwith three cutting wheels. This enables extremely efficientwork on pipes in situ involving only a small angle of movement.

244

Original STAHLWILLE pipe and tube tools

These extremely robust pipe cuttersguarantee accurate cutting without thedanger of the cut running off at anangle. Pipes can be directly passed onto the next processing stage.

Pin for wheels and rolls

Cutting wheels for steel, non-ferrous metaland plastic pipes

Individual components

2

4

31

1

Guide rolls for pipe cutters

3

Additional rings for versions with threecutting wheels

4

2

METAL Pipe Cutter No 153This light-weight, extremely convenient tool is specially suitable for cutting tubes made of copper, brass, light alloy or hard plastics and for thin-walled steel tubes with outer diameters of from 3 to 35 mm and maximum cutting depths of 2.5 mm. The integrated internal three-bladed cutter in the handle removes burrs.

Midget tube cutter No 155For pipes and tubes made of copper, brass, light alloy, hardplastics and for thin-walled steel tubes with outer diametersof from 3 to 16 mm where the maximum cutting depth is 2.0 mm – we recommend this extremely compact and accurate tube cutter.

STAHLWILLE Double Flaring Tools No 165NDouble Flaring Tools are used for making permanent connections between pressurised pipes. DIN standarddouble flares in accordance with DIN 74234 can be made with this convenient easy-to-use and tough toolmade by STAHLWILLE to create safe connections (e.g. in car brake leads) without the need for special skills.Simply clamp the tool in the vice – and it is ready for use.This tool guarantees rapid, safe processing of seamlessdrawn and double-walled rolled pipes (Bundy®) with wallthicknesses of 0.7 or 1.0 mm with a single flaring bit.

Included in the set:six flaring bits and two clamping blocks (also available separately)

245

Chain Pipe Cutter No 157Special pipe cutter, infinitely variable, with rotating handle,also for cutting stainless steel pipes with wall thicknesses of up to 1.8 mm and outer diameters of from 25 to 75 mm. Chain lengths up to 270 mm.

STAHLWILLE flaring tools –simple to use and guaranteed optimum results.

Various DIN standard single and double flares – easily and quickly produced using the STAHLWILLE double flaring tool.

Single flaring cone D

Double flaringcone E

Double flaringcone F

Double flaring cone F 180°

STAHLWILLE cutting wheels for steel pipesEspecially high-grade, wear-resistant steel enables extraordinarily high cutting force. The cutting wheels aremade of very tough special steel which guarantees longservice lifetimes.

Plastic pipe shears No 158Low force needed thanks to optimised force transmission.High cutting force thanks to Teflon coated bladeCutter body made of die-cast magnesium. Light but robust.

Pipe cutters, Miscellaneous tools

8

246

EXPRESS pipe cutters150with one cutting wheel andtwo guide rollers; for steel,copper, brass, aluminium and hard plastic tubes.

‘

F F G Cutting depth RCode size '' mm mm max. mm g S €‘

60020001 1 1) 1/8–1 1/4 3–32 6–43 4.5 1220 1 110.0060070002 2 1) 1/8–2 3–50 10–63 7 2191 1 109.0060020003 3* 3/4–3 20–80 26–90 9 3153 1 214.0060120001 1/3 2) 1/8–1 1/4 3–32 6–43 4.5 1140 1 124.001

60120002 2/3 2) 1/8–2 3–50 10–63 7 2004 1 124.00‘

1) with wide guide rollers2) with three cutting wheels* to be discontinued‘

METAL pipe cutter153for use on copper, brass, light alloy,PVC and thin walled steel tubes,with deburring tool (3 cutting edges)inside handle, forged, chromeplated.

‘

G G Cutting depth RCode '' mm max. mm g S €‘

60010000 1/8–1 3/8 3–35 2.5 356 1 65.00‘

Small bore pipe cutter155for use on copper, brass, light alloy, PVC and thin walled steel tubes.

‘

G G Cutting depth RCode '' mm max. mm g S €‘

60070001 1/8–5/8 3–16 2 102 1 23.80‘

Cutting wheelsSR150for steel pipes.

‘

for pipe O b RCode size cutter mm mm g S €‘

69020101 1 150/1 25 14 14 10 10.2069020201 2 150/2 32 19 28 10 9.9569020301 3/4 150/3 + 4 41 19 38 10 17.60‘

Cutting wheelsSR153

‘

for pipe O b RCode cutter mm mm g S €‘

69010001 153 20 6 6 10 9.50‘

Cutting wheelsSR155‘

for pipe O b RCode cutter mm mm g S €‘

69110001 155 20 5 5 10 5.90‘

Chain pipe cutter157infinitely adjustable, with twisthandle, also suitable for specialsteel pipes up to 1.8 mm wallthickness, chain length 270 mm.

‘

G Cutting depth RCode mm max. mm g S €‘

60110001 25–75 2 705 1 116.00‘

ChainK157‘

RCode g S €‘

69130001 183 1 85.50‘

Guide rollersfor pipe cutters.

‘

for pipe O b RCode No cutter mm mm g S €‘

69020107 RL 1500/1 150/1 23 21.5 62 2 8.2069070202 RL 1500/2 150–151/2 28 27.5 117 5 8.9569020302 RL 150/3/4150–151/3 + 4 33 19 230 5 10.3069010002 RL 153 153 12 12 10 5 5.95‘

Spindlesfor wheels and guide rollers.

‘

wheel- roller- for pipe L O RCode No bolt bolt cutter mm mm g S €‘

69020104 BL 150/1 x 1) 150/1 29 7.5 20 1 3.6069020103 BZ 1500/1 x 2) 150/1 38.5 7.5 14 10 3.6069070203 BZ 1500/2 x 150–151/2 46 9 23 10 3.6069070204 BL 1500/2 x 150–151/2 38 9 19 10 3.601

69020303 BZ 150/3/4 x x 150–151/3 + 4 36 9 34 10 3.6069020304 BL 150/4N x 3) 150/4 40 9 21 1 3.4069010003 BZ 153 x 153 18.5 4 2 10 3.6069010004 BL 153 x 153 13 4.75 2 10 3.60‘

BL = wheel boltBZ = roller bolt1) wheel- and roller bolt for 150/1 until 1985, wheel bolt for 150/1

from 19862) roller bolt for 150/1 from 19863) wheel bolt for 150/4 from 2009‘

Spacing washersRI 1500When required to fit pipe cutters No 150/1, 150/2 orNo 150/4 with 3 cutting wheels (to work in confinedspaces), a total of 4 spacing washers is required.Simply exchange the 2 guide rollers for 2 cutting wheelsNo SR150 with 2 spacing washers to each.

‘

for pipe O b RCode size cutter mm mm g S €‘

68020101 1 150/1 14 3.9 8 6 2.5568020201 2 150/2, 151/2 16 4.45 8 6 2.7068020301 4 150/4 *) 18 9.5 18 1 2.45‘

*) For 150/4 from 2009‘

8

247

Plastic pipe shears158

Ufor plastic pipes made of PE, PP, PB,PE-X, MLP/MSR, VPE, CPVC, PVC,PVDF and for dip-coated aluminiumtubes.• low force needed thanks to optimised force transmission• high cutting force thanks to Teflon coated blade• rapid blade changing without tools• size 42 with ratchet function and single-handed rapid blade retraction • Cutter body made of die-cast magnesium. Light but robust.

‘

O O L RCode mm '' mm g S €‘

60120026 26 1 205 235 1 34.7060120035 35 1 3/8 225 276 1 45.6060120042 42 1 5/8 245 441 1 60.00‘

Spare bladesKL158

U

‘


69120026 158-26 43 1 13.1069120035 158-35 60 1 20.5069120042 158-42 83 1 24.30‘

Double flaring tool165N

Uwith 1 pair of Clamping blocksNo 1650N, 2 Flaring cones No 1651and 1 Thrust piece/flaring coneNo 1652N.

‘

RCode G g S €‘

63031000 4.75; 5; 6; 8; 9; 10 mm; 3/16; 1/4; 5/16; 3/8'' 1420 1 411.00‘

Clamping blocks1650N

U1 pair

‘

RCode F g S €‘

68031001 4.75; 5; 6; 8; 9; 10 mm; 3/16; 1/4; 5/16; 3/8'' 198 1 78.50‘

Clamping blocks1650K

U1 pair, for dip-coated brake leads.

‘

RCode F g S €‘

68030003 5; 6 mm 100 1 66.50‘

Flaring cones

‘

G RCode size mm g S €‘

68040708 6+8 mm+1/4+5/16'' 8 56 1 21.6068040910 9+10 mm+3/8'' 10 56 1 21.60‘

D45° side of Clamping blocks to facespindle. Replace Flaring cone withThrust piece.

E45° side of Clamping blocks to facespindle. Pre-form with Flaring cone,finish with Forming cone.

F45° side of Clamping blocks to facespindle. Form with Flaring cone.

F180°By using the 90° sides of Clampingblock, Flare "F" receives a flat collar.

Double flaring toolThis simple-to-use STAHLWILLE DoubleFlaring tool will form accurate flares (to DIN 74234) on seamless drawn-and double walled (BUNDY®) tubing.

Clamped in a vice, the tool is instantlyready for use. Flaring and PressureCones are quickly changed.

The robust constructionof the tool, plus the shape of Flaringcones, enables single cone flaring ontubes of 0.7 or 1.0 mm wall thickness.

Tubing is held horizontally by25 mm wide Clamping blocks.This is important when endless tubing isused. A distance pin controls length oftube required for flaring.

Thrust piece/flaring cone1652N

U45°; 4.75/5 mm+3/16'', for Double flaring tool No 165N.

‘

G RCode mm g S €‘

68051001 4.75/5mm + 3/16'' 56 1 21.60‘

Flaring spindle1655N

Ufor Double flaring tool No 165N. ‘

RCode g S €‘

69101002 54 1 26.60‘

1651

Clamping screw1656N

Ufor Double flaring tool No 165N.

‘

RCode g S €‘

69101003 102 1 17.40‘

U


8

248

Plastic hammers10955with interchangeable heads ofimpact resisting cellulose acetateand ash handles.

‘

O L1 L2 RCode mm mm mm g S €‘

70160027 27 265 90 215 6 9.2070160032 32 280 100 325 6 12.1070160035 35 290 105 400 2 14.6070160040 40 320 110 550 2 17.401

70160050 50 340 115 860 2 26.60‘

Spare plastic heads10955Rof impact resisting cellulose acetate, these are lightly heated and then tapped into position.

‘

O RCode mm g S €‘

79040027 27 13 5 1.1579040032 32 21 10 1.7079040035 35 28 10 2.2579040040 40 37 10 2.601

79040050 50 65 10 4.60‘

Nylon hammers10956with interchangeable headsof shockproof nylon vestamidand hickory handles.

‘


70171027 27 265 90 232 6 15.0070171032 32 280 100 336 6 19.5070171035 35 290 105 413 2 22.7070171040 40 320 110 546 2 27.801

70171050 50 340 115 898 2 42.2070171060 60 380 135 1339 2 56.50‘

Spare nylon heads10956Rthese are lightly heated and then tapped into position.

‘


79050027 27 10 10 2.1579050032 32 17 10 3.1079050035 35 23 10 3.9079050040 40 28 10 4.751

79050050 50 52 10 8.5579050060 60 83 10 11.40‘

Plastic hammers10957the hollow head is partially filled withsteel shot which adds to the weight,prevents recoil; with interchangeableheads made of medium-hardpolyurethane and with a hickoryhandle.‘


70190025 25 320 108 320 6 37.5070190030 30 350 115 460 6 40.8070190035 35 355 118 580 6 44.9070190040 40 375 125 760 2 52.501

70190050 50 385 135 1250 2 65.5070190060 60 420 165 1900 2 125.00‘

Spare plastic heads10957R‘


79090025 25 14 10 5.5579090030 30 19 10 7.2579090035 35 26 10 8.9079090040 40 38 10 10.901

79090050 50 72 10 15.6079090060 60 118 10 25.60‘

Embossing hammer10958aluminium, cylindrical,with hickory handle.

‘


70240040 40 340 155 648 2 32.70‘

Engineers hammers10960with ash handles, DIN 1041.

‘

L1 L2 RCode g mm mm g S €‘

70110005 100 260 82 148 6 11.7070110001 200 280 95 254 6 12.6070110004 300 300 105 396 6 15.1070110002 500 320 118 614 6 16.101

70110006 800 350 130 951 2 24.5070110003 1000 360 135 1132 2 26.1070110007 1500 380 145 1615 2 33.7070110008 2000 400 155 2285 2 44.50‘

Rubber composition hammers10940DIN 5128, with two plane faces.

‘


70140001 55 320 90 317 2 5.3570140002 65 350 115 527 2 6.9570140003 75 350 130 780 2 10.7070140004 90 380 140 1190 2 16.00‘

8

249

Engineers hammers10970with ash handles.

‘

L1 L2 RCode lb. mm mm g S €‘

70120001 1/4 270 67 176 6 16.1070120005 1/2 290 82 320 6 18.5070120006 3/4 310 93 454 6 19.8070120002 1 320 99 575 6 20.701

70120004 1 1/2 350 118 790 2 27.8070120003 2 380 126 1044 2 31.70‘

ES 10956/10960/2

175 x 350 x 45 mm, 2 pieces‘

RCode g €‘

96838125 1130 46.95‘

No 10956 O 35 mm‘

No 10960 500 g‘

83812025 Empty tray 114 8.15‘

ES 10956/10970/2

175 x 350 x 45 mm, 2 pieces‘

RCode g €‘

96838131 1075 51.55‘

No 10956 O 35 mm‘

No 10970 1 lb.‘

83812025 Empty tray 114 8.15‘

Ribbed cold chisels100of tough tempered special steel,chrome plated.

‘

L b RCode size mm mm g S €‘

70010005 5* 125 18 93 10 8.8070010006 6 150 20 165 10 10.3070010008 8 200 26 305 5 15.0070010010 10 250 30 507 5 19.501

70010012 12 300 35 807 5 27.70‘


Ribbed cross-cut chisel101*of tough tempered special steel,chrome plated.

‘


70030006 6 150 4 143 10 10.70‘


Cold chisels102DIN 6453, chrome vanadium steel,lacquered silver.

‘


70020002 125 125 15 96 10 8.1570020003 150 150 18 172 10 9.9070020004 175 175 21 269 10 12.9070020005 200 200 24 379 5 14.801

70020007 250 250 25 479 5 20.0070020008 300 300 26 591 5 24.90‘

Cross-cut chisels103DIN 6451, flat, chrome vanadium steel, lacquered silver.‘


70040003 150 150 16 147 10 10.2070040004 175 175 17 239 10 12.9070040005 200 200 18 340 5 16.10‘

Grooving chisel110flat, chrome vanadium steel,lacquered silver.

‘

L b RCode mm mm g S €‘

70080001 240 26 292 5 14.40‘

Grooving chisel112as No 110,but with finger protector.

‘


70080002 240 26 411 5 17.50‘

Finger protector112/1for Cold Chisels No 102 and Cross-cut chisels No 103 from200 mm onward, for Grooving chisel No 110, shaft section 23 x 13 mm.

‘

RCode g S €‘

79160001 101 5 4.75‘


8

250

Drift pins104DIN 6458, octagonal,chrome vanadium, lacquered silver.

‘

x w L RCode size mm mm mm g S €‘

70060007 120 x 2 2 10 120 60 10 5.6570060010 120 x 3 3 10 120 60 10 5.6570060002 120 x 4 4 10 120 62 10 5.6570060008 120 x 5 5 10 120 64 10 5.901

70060003 120 x 6 6 10 120 66 10 5.9070060009 120 x 8 8 12 120 68 10 5.90‘

Centre punches105DIN 7250, octagonal,chrome vanadium, lacquered silver.

‘

w L RCode size mm mm g S €‘

70050001 100 x 10 10 100 52 10 4.7070050005 120 x 10 10 120 63 10 5.4570050002 120 x 12 12 120 90 10 5.70‘

Parallel pin punches108DIN 6450, octagonal,chrome vanadium, lacquered silver.

‘

x w L RCode size mm mm mm g S €‘

70071152 115 x 2 2 8 115 30 10 6.6570070013 125 x 3 3 8 125 35 10 5.6570070001 150 x 2.5 2.5 10 150 65 10 5.5570070002 150 x 3 3 10 150 62 10 5.501

70070003 150 x 4 4 10 150 64 10 5.4570070004 150 x 5 5 10 150 67 10 5.5070070005 150 x 6 6 10 150 72 10 5.8070070006 150 x 8 8 10 150 81 10 5.801

70070009 175 x 3 3 10 175 57 10 6.1570070010 175 x 4 1) 4 10 175 64 10 6.1570070012 175 x 6 6 10 175 69 10 10.1070070008 200 x 8 8 12 200 141 10 7.401

70070011 200 x 10 10 12 200 159 10 7.40‘

1) for use on Mercedes-Benz (retaining pins of disc brake pads)x diameter of tipw size of handle, octagon‘

Pin punches109with guide bush.

‘

v x L RCode size mm mm mm g S €‘

70090001 1 0.9 5 80 7 10 8.9070090002 2 1.4 5.5 82 12 10 8.8070090003 3 1.8 6 86 12 10 8.4070090004 4 2.4 7 95 18 10 8.401

70090005 5 2.8 7 97 19 10 8.4070090006 6 3.4 8 100 25 10 8.4070090007 7 3.9 9 100 27 10 8.4070090008 8 * 5.9 10 103 47 10 6.50‘

v diameter of tipx diameter of handle* without guide bush‘

ES 102/108/109/4

175 x 350 x 30 mm, 4 pieces‘

RCode g €‘

96838123 555 45.35‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

83812027 Empty tray 115 8.15‘

ES 102/105/108/8

175 x 350 x 33 mm, 8 pieces‘

RCode g €‘

96838124 900 60.35‘

No 102 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

83812036 Empty tray 114 8.15‘

Sets: Chisels, pins, punches102-5/66 piecescontent: 1 each

No 106/125 mmNo 106/150 mmNo 107/125 mmNo 104/120 x 2; 120 x 4 mmNo 105/120 x 10 mm

D = in plastic standPc = in plastic wallet

‘

RCode No g S €‘

98812201 102-5/6 D 445 1 34.0098812202 102-5/6 Pc 426 5 34.00‘

Set: Drift pins, centre punches104-5/6D6 piecesContent: 1 eachNo 104/120 x 2; 120 x 3; 120 x 4;

120 x 5; 120 x 6 mmNo 105/120 x 10 mmin plastic stand

‘

RCode g S €‘

96700601 417 1 34.45‘

8

251

Pin punch-/centre punch set105-8/6K6 pieces in transparent plastic containerstand.Content: 1 eachNo 108/150 x 2.5; 150 x 3; 150 x 4;

150 x 5; 150 x 6 mm; DIN 6450/ Form C

No 105/120 x 10 mm; DIN 7250

‘

RCode g S €‘

96700711 483 1 33.25‘

Sets: Parallel pin punches108/66 piecesContent: 1 eachNo 108/150 x 2.5; 150 x 3; 150 x 4;

150 x 5; 150 x 6; 150 x 8 mmD = in plastic standPc = in plastic wallet

‘

RCode No g S €‘

96700701 108/6 D 450 1 33.6096700702 108/6 Pc 424 5 33.60‘

TCS 102–109/10956/10960/6


RCode g €‘

96838181 1500 94.60‘

No 10956 O 35 mm‘

No 10960 500 g‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

TCS 102-108/11

xö175 x 350 x 33 mm, 11 pieces‘

RCode g €‘

96838754 1665 108.05‘

No 102 150; 200; 250 mm‘

No 105 120 x 10; 120 x 12 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

TCS 102–108/10957/10960 MF

xö

530 x 350 x 40 mm, 12 pieces‘

RCode g €‘

96830355 3343 216.60‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500; 800 g‘

No 12718‘

TCS 102–108/10957/12718/13

xö

530 x 350 x 40 mm, 13 pieces‘

RCode g €‘

96830226 3730 222.60‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8; 200 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500; 800 g‘

No 12718‘

TCS 102–108/10960/10

xö175 x 350 x 40 mm, 10 pieces‘

RCode g €‘

96830361 1569 102.25‘

No 102 200 mm‘

No 105 120 x 12 mm‘

No 108 115 x 2; 150 x 3; 150 x 4; 150 x 5;150 x 6; 175 x 4; 200 x 8 mm

‘

No 10960 500 g‘


8

252

TCS 102–108/10957/10960/13

xö

530 x 350 x 60 mm, 13 pieces‘

RCode g €‘

96830177 5540 249.75‘

No 102 200; 300 mm‘

No 103 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 50 mm‘

No 10960 500; 800; 1000 g‘

TCS 102–108/10957/10960/16

xö

530 x 350 x 45 mm, 16 pieces‘

RCode g €‘

96830609 3715 265.85‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500 g‘

No 12373‘

No 12600 500 g‘

No 12718‘

No 12931 3 m‘

No 65 64 2 250‘


TCS 102–108/10956/10960/18

xö

530 x 350 x 55 mm, 18 pieces‘

RCode g €‘

96830620 3653 249.15‘

No 102 150 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

No 10956 O 50 mm‘

No 10960 300; 500 g‘

No 10356‘

No 10670 285 mm‘

No 10672 20 x 315 mm‘

No 12374‘

No 12900N‘

No 12965‘

Three square engineers scrapers10670special steel.

‘


72060101 215 106 5 9.8572060103 265 124 5 10.4072060104 285 140 5 11.1072060105 310 152 5 11.90‘

Flat engineers scrapers10672special steel.

‘

RCode mm g S €‘

72050104 20 x 315 227 5 12.2072050105 25 x 365 367 5 14.70‘

Three square engineers bearingscraper

10676

special steel.

‘

RCode mm g S €‘

72080103 85 x 12 x 315 160 5 11.80‘

8

253

Engineers file, round12025DIN 8349, cut 2

‘


72120100 210 118 5 12.70‘

Engineers file, half round12030DIN 8349, cut 2

‘


72130100 260 317 5 23.20‘

Engineers file, three-square12035DIN 8349, cut 2

‘


72140100 210 201 5 16.70‘

Engineers file, hand12036DIN 8349, cut 2

‘


72170102 260 339 5 17.00‘

Hand vice12200forged C 35,width of jaws 48 mm.

‘


71200000 145 673 1 35.40‘

Tubular hacksaw12050adjustable,with blade size 300 mm/12''.

‘


72210000 465 490 1 20.30‘

Spare hacksaw blades for No 1205010 pieces, H.S. Steel, 24 teeth per inch.

‘


79180001 300 174 1 27.70‘

Hacksaw frame12053

‘


72210002 252 159 1 11.30‘

Spare hacksaw blades for No 120536 pieces, Chrome Alloy Tool Steel, 32 teeth per inch.

‘


79180002 158 23 1 3.10‘

ES 10670–13110/11

530 x 350 x 35 mm, 11 pieces‘

RCode g €‘

96838173 2120 159.95‘

No 10670 265 mm‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 260 mm‘

No 12050 465 mm‘

No 12320‘

No 12321‘

No 12377‘

No 12931 3 m‘

No 13110 300 mm‘

83812088 Empty tray 301 22.30‘


8

254

TCS 12025–13110/11

xö

530 x 350 x 35 mm, 11 pieces‘

RCode g €‘

96838759 2070 185.25‘

No 12025 210 mm‘

No 12030 260 mm‘

No 12035 210 mm‘

No 12036 260 mm‘

No 12050 300 mm‘

No 12320‘

No 12321‘

No 12718‘

No 12931 3 m‘

No 12965‘

No 13110 300 mm‘

Stud remover set905/25M 5–M 16, 3/16''–5/8'', 25 pieces,in green plastic box.Content:5 HSS twist drills sizes

(3.2; 4.8; 6.4; 8; 8.7 mm)5 Fluted Removal Pins sizes 1–5

for threads M 5–M 165 Splined Nuts, sizes 1–5

10 Drill Guides, sizes 1–10

‘

RCode g S €‘

96713025 555 1 117.00‘

Spare parts906Removal pins and splined nuts, in pairs in plastic bags.

‘

for RCode size threads g S €‘

71310001 1 M5–M6 3/16–1/4'' 14 1 6.8071310002 2 M7–M8 1/4–5/16'' 20 1 7.8071310003 3 M10 3/8'' 33 1 9.3071310004 4 M12 7/16'' 46 1 11.001

71310005 5 M14–M16 1/2–9/16'' 65 1 12.70‘

Universal thread restorers12000suitable for inside andoutside threads.

‘


72100004 ISO 230 119 10 45.7072100003 SAE 230 118 10 46.9072100002 WW 230 122 10 46.90‘

|–––– ISO ––––| |–––– Ww ––––| SAE/USSPitch metr. threads Whitworth threadsmm thread per inch thread per inch'

'

0.80 5 24 3/16 + 7/32 241.00 6 + 7 20 1/4 201.25 8 + 9 18 5/16 181.50 10 + 11 16 3/8 161.75 12 14 7/16 142.00 14 + 16 12 1/2 + 9/16 132.50 18, 20, 22 11 5/8 + 11/16 123.00 24 + 27 10 3/4 + 13/16 11'

Screw pitch gauge126650.25 to 6 mm and 4 to 62 t.p.i.(metric/Whitworth threads).

‘

RCode size g S €‘

77270003 52 79 10 6.80‘

Screw EXTRACTOR set900/6Pcin green plastic bag.

‘

RCode Content g S €‘

96710101 1 each No 900 size 1–6 220 5 50.75‘

Screw EXTRACTOR900

‘

for D D L recommend.RCode size bolts mm '' mm Drill g S €‘

71010001 1 M3–M4 1/8–5/32'' 3 1/8 51 2 mm 5/64'' 3 10 6.1571010002 2 M5–M7 3/16–1/4'' 3.4 9/64 62 3 mm 7/64'' 6 10 7.6071010003 3 M8 5/16'' 4.9 3/16 70 5 mm 3/16'' 10 10 7.6071010004 4 M10–M12 3/8–7/16'' 7 9/32 77 6.4 mm 1/4'' 20 5 9.151

71010005 5 M14–M16 1/2–9/16'' 9 23/64 88 8 mm 5/16'' 48 5 9.5571010006 6 M18–M22 5/8–3/4'' 12 31/64 98 12 mm 15/32'' 92 5 11.60‘

8

255

Stud remover904• Suitable for all sizes of studs from 6–12 mm.• Also suitable for percussion screwdriver use.• Will cope with rusted or scale-coated screwswith a minimum of 3 mm protruding.

Chuck: size 36 mmClamping screw: size 24 mm

‘

a RCode '' g S €‘

71340000 3/8 420 1 152.00‘

Nut splitters12615galvanised, for splitting nuts of qualityrange up to 8.8 (55 tpsi).

‘

for nuts RCode size mm g S €‘

71250011 1 10–18 193 1 66.5071250012 2 19–27 386 1 68.50‘

Vernier calliper12900Nas per DIN 862,vernier readings 1/20 mm and1/128'', stainless steel,c/w plastic pouch.

‘

measuring range RCode mm/'' g S €‘

77371001 150/6 185 1 37.50‘

Vernier calliper12900/1Nwith a large digital display, automatic shut-off, switchfor mm/inches, depth gauge,RS232C interface, spare battery,differential measurements by means of 0 reset function, display accuracy0.01 mm / 0.0005'', in plastic case.

‘

measuring range RCode mm/'' g S €‘

77371002 150/6 312 1 96.00‘

Brake disc gauge12900/2NDIN 862, for measuring thethickness of car and motorcyclebrake discs in situ, stainless steel,with locking screw and trailingvernier scale (1/10 mm), in woodenstorage box.

‘

measuring range throat depth RCode mm mm g S €‘

77371003 60 55 233 1 109.00‘

Tape measure12931with tape lock. Metric-Inch scales.

‘

L RCode m g S €‘

77040004 3 104 10 12.80‘

Workshop micrometers12935NDIN 863, chrome plated.• With clamping ring and precisionratchet knob

• With insulating plates• Tungsten carbide anvil• Readings 0.01 mm

‘

measuring range Pitch RCode size mm mm g S €‘

77411001 1 0–25 0.5 297 1 42.4077411002 2 25–50 0.5 461 1 52.5077411003 3 50–75 0.5 601 1 65.0077411004 4 75–100 0.5 809 1 81.50‘

Steel rule13110Metric-Inch scales, length 300 mm.

‘

Divisions Divisions RCode Top Edge '' Lower Edge mm g S €‘

77460001 1/16, 1/32, 1/64 0.5; 1 26 5 5.00‘

Ratchet tap holders12915steel, chrome plated.

‘

Capacity L RCode size mm DIN 1) ISO 2) mm g S €‘

77390001 1 2.0–5.0 M3–8 M1–6 85 180 1 17.8077390002 2 4.6–8 M5–12 M6–12 110 305 1 23.10‘

1) for taps DIN2) for taps ISO‘

Set warding files128006 pieces, in Pc-wallet, DIN 7283,Content: 1 file each, hand,flat, half round, three square, square, round

‘


72230001 100 111 5 18.40‘

Set of needle files131006 pieces, in plastic wallet,Content: 1 file each, round, half round,three square, square, hand, flat

‘


96722801 140 46 1 56.50‘


8

256

Padlock12932

‘

RCode g S €‘

77210002 85 1 13.20‘

Force feed oil can12250metal container, brass pump.Content: 500 ccm

‘

RCode g S €‘

77010001 270 1 23.40‘

Plastic oil can12251Content: 250 ccm

‘

RCode g S €‘

77110002 80 5 9.90‘

Electricians cable knife12320with stainless blade.

‘

Blade RCode mm g S €‘

77020000 90 81 10 12.80‘

Scribing iron12321with knurled centre-section.1 straight and 1 offset blade;blades gunmetal finished.

‘


77100000 250 31 10 3.85‘

Tungsten carbide scribing iron12322

Ustraight type; sturdy shank with tungsten carbide tip.Can be reground. Holder and clip.

‘


77100001 140 35 10 3.40‘

Wire brush12374wood, steel wire dia. 0.35 mm.

‘

L RCode mm Rows g S €‘

77090000 290 4 129 10 2.70‘

Wire brush12377with brass coated steel bristles.

‘


77090010 270 140 24 2.90‘

File brush12378

‘


77250000 260 74 5 4.35‘

Brass wire brush13115for use on light alloys.

‘


77470001 280 4 134 1 6.80‘

Scraper12481

‘


77070000 212 60 65 10 4.00‘

8

257

Magnetic lifters12600Loss of adhesion above 80°C.

‘

lifting power O L RCode g mm mm g S €‘

77260027 270 1) 5 500 25 1 7.8577260025 500 8 460 70 1 19.2077260060 1800 15 520 230 1 28.9077260200 3000 19 535 297 1 49.80‘

1) Miniature magnetic lifter with tiny head, very powerful‘

Adjustable hook spanners12910for slotted nuts as per DIN 1810,adjustable.

‘

A RCode size mm g S €‘

44010001 1 20–42 90 5 27.3044010002 2 45–90 245 5 29.5044010003 3 95–165 686 5 52.50‘

Telescopic mirror12920Nwith non-twisting, oval-section telescopic rod.

‘

L RCode mm mm g S €‘

77401001 65 x 43 310–750 65 1 33.50‘

Replacement mirror for No 12920N12920NR-1‘

RCode g S €‘

79401001 43 1 14.60‘

Stainless steel replacement mirrorfor No 12920N

12920NR-2

‘

RCode g S €‘

79401002 43 1 10.10‘

Telescopic mirrors12921N

‘

O L RCode mm mm g S €‘

77401030 30 265–705 108 1 28.5077401040 40 275–715 112 1 29.1077401050 50 285–725 135 1 32.0077401060 60 295–735 150 1 33.50‘

Replacement mirror for 12921N12921NR‘


79401030 30 10 1 9.7079401040 40 15 1 11.0079401050 50 20 1 14.6079401060 60 27 1 15.20‘

500-3000

270

Light unit12923with LEDs, includes batteries, can be used with telescopic mirrorsNo 12920 and 12921.

‘

RCode g S €‘

77400004 40 1 44.10‘

Telescopic mirror13120-1with light unit No 12923 (LED) andbatteries, for inspecting numerouskinds of joints. The concave mirrorprovides 5-times magnification. With non-twisting, oval-section telescopic rod.

‘


77480202 55 310–750 127 1 77.50‘

Telescopic mirror13120NIlluminated (LED) and with batteries(approx. 150 hours of light), forinspecting numerous kinds of joints.The LED light source can be detached and used as a separate penlight.The concave mirror provides 5-times magnification. With non-twisting, oval-section telescopic rod.

‘


77480002 55 310–750 235 1 89.50‘

Replacement concave mirror forNo 13120N, No 13120-1

13120R

‘

RCode g S €‘

79401055 43 1 15.60‘

Claw lifter12922Ewith ergonomic handle.

‘


77401103 6 540 113 1 35.1077407203 8 540 148 1 35.50‘


8

258

Soldering gun12941N230 V, 50–60 Hz, 100 W.

‘

RCode g S €‘

96774200 839 1 80.55‘

Replacement tip for soldering gunNo 12941N

‘

RCode g S €‘

79140006 9 1 8.55‘

Soldering iron12943N230 V, 50–60 Hz.

‘

RCode W g S €‘

77420030 30 224 1 50.0077420060 60 276 1 51.50‘

Replacement tips for No 12943N12943R‘

RCode size g S €‘

79140030 30 7 1 8.2079140060 60 31 1 8.20‘

Universal cutter12965with hole for hanging up and5 spare blades in handle, bladeis adjustable by moving slide,suitable for cutting card, rubber,leather, wood.‘


77620001 160 178 1 7.80‘

Spare blades12965R5 pieces.

‘

RCode g S €‘

79250001 19 20 2.25‘

Wire stripping knife with hooked blade12966

Ufor cutting round the outer cableinsulation and longitudinal cuts.• accurate, fast and safe stripping of all popular round cables from 4 - 28 mm O.

• no damage to the inner conductorsthanks to infinitely variableadjustment of the cutting depth.

‘

RCode g S €‘

77620003 99 1 13.70‘

Spare blade for No 1296612966R

U‘

RCode g S €‘

79250003 2 1 3.55‘

Torch13126ABS body with high-impact polycarbonate lens. Approved by FM, CSA,AUS and MSHA as non flammable. Laser-SPOT™ xenon lamp modulegenerates a finely focussed white collimation light beam with a netintensity up to 400% higher than normal. 12.000 candlepower. Bulb lifetime: 30 hours. With black rubber lens protection.Conforms to US military regulations - Class. I Div. 1 USAR. Takes 3 alkali batteries (C) (not included). Suitable for underwater use.Waterproof up to 100 m.

‘


77490002 191 160 1 83.50‘

Torch13127Made of high-impact polycarbonate resin developed for space use.Focussed beam; with light deflector. Approved by FM, SA, and CENELECas non flammable. Bulb lifetime: 20 hours. Suitable for underwater use.Waterproof to 150 m.Consisting of:torch, light deflector for deflecting beam through 90°,takes 2 alkali batteries (AAA) (not included).

‘


77490003 120 80 1 35.80‘

12941R/4

8

259

TCS 13126/13127/2

xö

175 x 350 x 60 mm, 2 pieces‘

RCode g €‘

96830014 475 188.30‘

No 13126‘

No 13127‘

Spares for torches‘


79490002 13126 (Spare lens) 33 1 38.3079490003 13127 (Spare lens) 7 1 10.9079490004 13126 (Bulb unit) 25 1 48.5079490005 13127 (Bulb unit) 10 1 20.50‘

Tweezers13130straight, blunt,finely milled inside,stainless steel.

‘


77500001 160 25 5 15.50‘

Tweezers13131bent, blunt, finely milled inside,stainless steel.

‘


77510001 150 22 5 13.60‘

Wire cutter13135with smooth cutting edges,nickel-plated,plastic covered handles.

‘


75270001 145 93 1 13.20‘




8

4

1

9

Pullers

Product benefits at a glance:high flexural strength thanks to struts with accurately calculated profiles and milled, smooth guides.

highly load-bearing extractor hooks made of oil-hardenedchrome vanadium steel with milled-profile jaws and specially-designed grip geometry for use in confined spaces and optimised radii for shafts and axles.

smooth running and high force transmission through the nutwith its hard-wearing, smooth thread contours.

high extraction force with ease is made possible even wherethere is high friction and counterforces due to the CNC milledprecision thread.

damage to the thread of the nut is effectively prevented, evenif the full length of the thread is used, due to the clearance atthe end of the thread.

excellent running characteristics of the thread itself thanks to high-grade hardening and tempering and the special coatings on the thrust spindles.

to enable stubborn parts to be loosened, it may be necessaryto tap the puller with a hammer after it has been tensioned.For this reason, the spindle head is equipped with a roundedimpact head.

close-tolerance, performance-matched jaw sizes on thespindle head ensure non-slip contact with the drive tool.

to prevent damage to the shafts while extraction force is applied, the centre is freely-swivelling.

262

STAHLWILLE pullers

Designed with practical applicationsin mind, drop forged, precision machined on the latest machinetools, hardened and tempered.STAHLWILLE pullers are conscientiously assembled and tested under load. They are idealtools for removing gearwheels, ballbearings and pulleys from shafts,axles etc.

How a two-armed puller works

Battery terminal puller in use on a car battery

After attaching and lockingthe puller No 11060/11061 ,the central threaded spindleis turned to ease the bearingoff its mount without causingdamage.

263

Numerous pullers are available for different applications:

2

1

1

2

Standard pullersTwo- or three-armed puller?A three-armed puller is generallypreferable to a two-armed one provided there is sufficientspace because it distributes thepulling forces more evenly.

Separating fixture in use for removing ball bearings

Puller in use for removing gearwheels

Standard pullers

Battery terminal pullers

Ball joint separators

Internal pullers

Counter stays

Separating fixtures

Wheel hub pullers

Pullers

9

264

Standard pullers11050two-armed, with sliding permanentlyparallel extractor hooks, zinc plated; for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles;for removing ball bearings, bearing outerraces and bushes from holes; hooks canbe used as internal or external hooks.

‘

Clamp. width Clamp. depth RCode size mm mm g S €‘

71130011 1 25–80 100 1000 1 78.0071130012 2 25–130 100 1100 1 83.0071130013 3 50–160 150 2800 1 141.0071130014 4 60–200 150 3200 1 157.001

71130015 5 80–250 200 6700 1 261.0071130016 6 80–350 200 8000 1 296.00‘

Arms for pullers No 11050/11051H 110501 piece

‘

for puller RCode size No g S €‘

79130011 1 11050-1, -211051-1, -2 238 1 36.30

79130012 3 11050-3, -411051-3, -4 580 1 45.80

79130013 5 11050-5, -6 1615 1 77.00‘

Standard pullers11053two-armed, with swivelling extractor hooksfor larger reaches, zinc plated;for extracting gearwheels, ball bearings,pulleys and similar parts from shafts or axles;hooks can be used as internal or externalhooks;for internal extraction, simply turn the hooksand spindle round;the large leverage effect ensures a firm gripon the part to be extracted, whether internalor external.

‘


71150211 1 50–300 270 4500 1 156.0071150212 2 50–400 400 5800 1 187.00‘

Standard pullers11051three-armed, with sliding permanentlyparallel extractor hooks, zinc plated;for extracting gearwheels, ball bearings,pulleys, fan wheels and similar parts fromshafts or axles;for removing ball bearings, bearing outerraces and bushes from holes;hooks can be used as internal or externalhooks.

‘


71080011 1 25–80 100 1280 1 109.0071080012 2 25–120 100 1600 1 116.0071080013 3 25–160 150 3600 1 199.0071080014 4 25–200 150 3690 1 223.00‘

Pullers11054three-armed, with swivelling extractor hooksfor larger reaches, zinc plated;for extracting gearwheels, ball bearings,pulleys and similar parts from shafts or axles;hooks can be used as internal or externalhooks;for internal extraction, simply turn the hooksand spindle round;the efficient leverage effect forces the hooksfirmly onto the part to be extracted.

‘


71150311 1 50–300 270 5700 1 204.0071150312 2 50–400 400 8000 1 251.00‘

Set: Pullers11056consisting of the most commontwo- and three-armed pullers withtwo- and three-armed, sliding,parallel extractor hooks.for extracting gearwheels, ballbearings, pulleys and similar partsfrom shafts or axles;hooks can be used as internal orexternal hooks;the efficient leverage effect forcesthe hooks firmly onto the part to beextracted.

‘

Clamp. width Clamp. depth RCode mm mm g S €‘

96711311 120 100/200/250 7000 1 534.00‘

9

265

Pullers12150two-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings,pulleys and similar parts from shafts or axles;for removing ball bearings, bearing outerraces and bushes from holes;for internal extraction, simply swivel the hooksand turn the spindle round or just turn thehooks round.

‘


71140211 1 20–150 80 720 1 70.0071140212 2 40–220 130 1675 1 121.00‘

Three arm pullers12152three-armed version with swivelling, double-action extractor hooks, zinc plated;for extracting gearwheels, ball bearings,pulleys and similar parts from shafts or axles;for removing ball bearings, bearing outerraces and bushes from holes;for internal extraction, simply swivel the hooksand turn the spindle round or just turn thehooks round.

‘


71140311 1 20–150 80 920 1 93.0071140312 2 40–200 130 2235 1 156.00‘

Two arm pullers11055two-armed, with swivelling extractorhooks and lateral clamp clip, zinc plated;when the clamp clip is tightened, the claws of the extractor hookslocate under the part to be extractedand lever it free as force is appliedbefore extraction begins;for extracting gearwheels, ball bearings, pulleys, drop arms andsimilar parts from shafts or axles;the clamp clip presses the extractorhooks firmly against the part being extracted.

‘


71190011 1 20–70 85 1211 1 118.0071190012 2 20–100 100 1643 1 137.0071190013 3 30–150 150 2907 1 185.00‘

Battery terminal pullers11040two-armed, with a self-centring quick-actionclamp and automatic feed, zinc plated;for extracting battery terminal clamps, smaller ball bearings, pulleys etc.;as force is applied through the spindle, the extractor hooks automatically applyincreasing force to the part being extracted;particularly suited to car electrics, compressedair system repairs and similar applications dueto the compact design and small hooks.

‘


71120011 1 10–60 45 245 1 37.0071120012 2 10–70 65 261 1 37.3071120013 3 10–100 80 560 1 44.70‘

Battery terminal pullers11042three-armed, with a self-centring quick-action clamp and automatic feed,zinc plated;for extracting battery terminal clamps,smaller ball bearings, pulleys etc.;as force is applied through the spindle, the extractor hooks automatically applyincreasing force to the part beingextracted; particularly suited to carelectrics, compressed air system repairsand similar applications due to thecompact design and small hooks.

‘


71180011 1 10–60 45 299 1 57.5071180012 2 10–70 65 340 1 58.5071180013 3 10–100 80 692 1 62.00‘

Internal pullers11060for extracting ball bearings, bearing outer races and bushes, zinc plated; to be used with Counter stay No 11061and Slide hammer No 11062;even bearings which are tight up against the walls are securely grippeddue to the excellent clamping effect.

‘

Clamp. width RCode size mm g S €‘

71160010 0 8–12 100 1 45.1071161011 1 12–16 110 1 45.1071160021 1a 16–20 120 1 45.1071160012 2 20–27 131 1 51.001

71160013 3 27–36 365 1 54.0071160015 5 36–46 385 1 74.5071160016 6 46–58 558 1 95.0071160017 7 58–70 612 1 124.001

71160018 8 70–100 1659 1 192.00‘

Pullers

9

266

Counter stays11061to be used with Internal Puller No 11060; zinc plated; insert and open up the internal puller;screw the spindle of the counter-stay into the internal puller; extract the workpiece.

‘

suitable for RCode size No 11060 g S €‘

71170011 1 sizes 0–2 654 1 42.9071170012 2 sizes 3–7 1500 1 66.5071170013 3 size 8 2317 1 133.00‘

Slide hammers11062to be used with Internal PullerNo 11060; zinc plated; for extracting ball bearings if it is notpossible to use Puller No 11061 because there is insufficient space.

‘

suitable for RCode size No 11060 g S €‘

71161001 1 sizes 0–2 650 1 49.1071161002 2 sizes 3; 5 1435 1 80.50‘

Separating fixtures12613zinc plated; for use with No 12614 of samesizes; for separating and extracting ballbearings, roller bearings, bushes, wheels and other tightly fitting parts;applying uniform pulling force to the side bolts will gently separate workpieces;apply puller No 12614; apply force to pull off.

‘

Clamp. width Opening RCode size mm mm g S €‘

71030010 0 5–60 60 562 1 57.5071030011 1 12–75 75 787 1 72.5071030012 2 22–115 115 2100 1 119.0071030013 3 30–155 155 4462 1 188.00‘

Pullers12614zinc plated; for use with No 12613 of samesizes; for extracting ball bearings,roller bearings, bushes,wheels and other tight fitting parts;the puller is connected to separatorNo 12613 to enable the workpieceto be extracted.

‘

Clamp. width Extraction bolts RCode size mm mm g S €‘

71040010 0 45–110 110 910 1 56.5071040011 1 55–140 155 1220 1 90.5071040012 2 60–215 200 2800 1 137.0071040013 3 85–295 315 6000 1 204.00‘

ExtensionsV 126141 pair, for use with puller No 12614;extensions for the extraction bolts on the puller for use with longerworkpieces.

‘

L RCode size for No mm g S €‘

79440011 1 12614-0, -1 100 89 1 15.7079440012 2 12614-2 150 233 1 25.8079440013 3 12614-3 150 743 1 29.70‘

Universal wheel hub pullers11030with three extractor hooks, zinc plated;for extracting wheel hubs on HGV’s and cars up to a hole diameter of 225 mm;the axially mounted threaded bush enablesthe workpiece to be freed by gently tappingthe end of the spindle.

‘

RCode size Arms g S €‘

71110013 1 3 3566 1 159.0071110015 2 5 4568 1 204.00‘

Arm for No 11030H 110301 piece

‘

RCode g S €‘

79100010 524 1 24.50‘

9

267

Ball joint separators11041for forcing out ball pins on vehicles, zinc plated.

‘

A B C RCode size mm mm mm g S €‘

71230011 1 18 37 37 309 1 39.6071230012 2 23 45 45 476 1 51.5071230013 3 29 55 60 1300 1 66.5071230014 4 39 70 80 2000 1 87.00‘

size 1 for passenger vehiclessize 2 for passenger vehicles and vanssize 3 + 4 for trucks‘

Spindles‘

for puller RCode No No g S €‘

79281011 SP 11040-1 11040-1; 11042-1 108 1 14.8079281111 SP 11040-2 11040-2; 11042-2 120 1 18.9079281012 SP 11040-3 11040-3; 11042-3 80 1 14.3079281013 SP 11050-1 11050-1, -2; 11051-1, -2; 11056;

12150-1, 12152-1, 12614-0, -1 171 1 31.801

79281014 SP 11050-3 11050-3, -4; 11051-3, -4; 12614-2 590 1 48.6079281015 SP 11050-5 11050-5, -6 1210 1 93.5079281016 SP 11055-1 11055-1 177 1 42.8079281017 SP 11055-2 11055-2 176 1 47.501

79281018 SP 11055-3 11055-3 592 1 88.5079281019 SP 11041-1 11041-1 80 1 19.1079281020 SP 11041-2 11041-2 94 1 19.1079281021 SP 11041-3 11041-3 360 1 56.001

79281022 SP 11041-4 11041-4 231 1 74.5079281023 SP 11053-1 11053-1, -2; 11054-1, -2 880 1 81.5079281034 SP 12150-2 12150-2; 12152-2 440 1 53.00‘

Universal ball joint separator12616zinc plated, DIN/ISO 7803, for extracting ball-joints on cars and light delivery vans.

‘

Fork opening Clear height RCode size mm mm g S €‘

71050010 1 18–22 20–50 611 1 76.00‘

Ball joint separator12623zinc plated; for extracting ball-joints especiallyon BMW, Fiat, Ford, Mercedes-Benz, Nissan,Opel, Toyota, VW/Audi and Volvo cars.

‘

Fork opening Clear height RCode mm mm g S €‘

71050011 20 12–50 1284 1 97.50‘

Ball joint separator12623-1for vehicles with aluminium chassis; zinc plated;for extracting ball-joints, especially on AudiA6 and A8 after model year 1999 and forother vehicles with limited work space.

‘


71050012 24 60–80 1577 1 134.00‘

Ball joint separator12623-3on heavy goods vehicles, buses and construction site vehicles;zinc plated.

‘


71050014 35–45 115 6000 1 286.00‘

Ball joint separator12623-4on medium-sized and heavy HGV’s, buses and construction site and otherspecial vehicles; zinc plated.

‘


71050015 27–36 90 3438 1 153.00‘




9

5

1

10

Special automotive tools

Problem solver: STAHLWILLE special-purpose car pliersOften enough, corroded or jammed parts in hard-to-reach placesslow down repair and servicing jobs in the engine space. With diesels, this includes the heater plug sockets.STAHLWILLE heater plug socket pliers make it that much easierto remove and refit these plug sockets, especially when the engine is still hot.

270

STAHLWILLE special-purpose tools for the automotive industry

Together with leading automotive manufacturers, STAHLWILLE develops special-purpose tools andbrand-specific sets of tools. This continuous development and enhancement process covering toolsfor production and workshops ensures that the tools we make keeppace with the latest developments inthe industry.

Better safe than sorry: STAHLWILLE socketsIt would be hard to imagine garage and production environmentswithout compressed air tools. Hardly surprising, then, thatSTAHLWILLE offer such a wide range of tried-and-tested, job-specific sockets, e. g. the wheel-nut socket with the closely-fitting plastic sleeve. This prevents damage to wheel bolts, wheelnuts and the bolt holes especially on alloy wheels.

Tidy tool management:STAHLWILLE tool sets for car repairsCarefully selected suites of tools for Tool Trolleys and Tool Boxes ensure optimised workflows. Whether it is in the garage, in production or in the pits, many mechanics welcome the benefits afforded by model and marque specific tools to guarantee safe, timesaving work.

271

The specialists: STAHLWILLE KABELEX®

Efficiency and economy in the workplace – at a time whenit pays to be competitive, removing cables on vehiclessafely and quickly gives you that advantage. This is whySTAHLWILLE offers over 40 different cable removing toolsfor cars. They are available individually, in carefully selected sets or as special sets for specific vehicles.The fine but highly resistant blades are made of chromevanadium and special spring steel.

Unbreakable: Special tools for car glassThe professionals really appreciate STAHLWILLE productsfor quickly and accurately removing and fitting car glass.Twin suction lifters and a three-component glass removalset ensure that windscreens and other car glass are easilyand safely removed, fitted and transported.

Thick or thin: Measuring the thickness of brake discsChecking the state of the brake discs is a valuable contribution to safety on the roads. STAHLWILLE offers a vernier calliper which enables the garage to easily check the discs in situ and comparethe dimensions with the manufacturer's instructions.

A question of torque: Friction gaugerSetting steering systems accurately is a critical job – andadhering to torque settings and coefficients of friction is a crucial part of it. This is what STAHLWILLE created theeasily-operated Friction gauge No 73Nm/15 with a range of 2–15 N m.


272

10

STAHLWILLE KABELEX® ProtectFor workshops and cable configuration(Kabelex table see page 312)

D Bicoloured handle:- with locking blade cover, to protect the fine blade and guardagainst injury.- easier to handle for fine and intricate work on miniatureconnectors.

D Releases cable connectors quickly and easily without cuttingthem off – saves time and money.

D Also available in carefully selected sets.

D Special sets for vehicle makes: BMW, Mercedes-Benz, Opel,VW/Audi/Seat/Skoda/Porsche, MAN/Volvo and Renault/PSA.

D Over 40 different cable extractors available.

D Blades made of extremely tough and durable chrome vanadiumand special spring steel.

Tool set KABELEX®1510VW/Audi

11 pieces, for VW/Audi, Seat, Skoda,Porsche.Content:No1501, 1502: ejection tools for

contact sizes O 1.5 and 3.5 mmNo1511, 1512: dismantling sleeves

for contact sizes O 1.5 and 3.5 mm

No1553, 1557, 1558, 1591: cable extractor tools for contactsizes y 2.8; 4.8 and 5.8 mm

No1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mmNo1556-1: cable extractor tool for flat plug-in sockets with asymmetrically

positioned latches in terminals with two release channels y 0.64 mmNo1574: cable extractor tool for Micro Timer I contacts y 1.6 mm

‘

RCode g S €‘

96746203 1070 1 401.05‘

Tool set KABELEX®1520Mercedes-Benz

16 pieces, for Mercedes-Benz.Content:No1501, 1504, 1508: ejection tools


No1511, 1514, 1518: dismantlingsleeves for contact sizesO 1.5 and 2.5 mm

No1553, 1591: cable extractor toolsfor contact sizes y 2.8 and 5.8 mm

No1556: cable extractor tool for Micro-Timer II, III contactsy 1.6 mm

No1559: cable extractor tool for Maxi-Power Timer contactsy 9.5 mm

No1578K-1: cable extractor tools for SLK contacts (primary) y 2.8 mmNo1578K-2: cable extractor tool for SLK contacts 97

(primary and secondary) y 2.8 mmNo1584, 1585: cable extractor tools for soldered contacts with contact

O 2.5 and 4.0 mmNo1587: cable extractor tool for flat plug-in sockets, E-95 contacts

y 1.65 mmNo1589K: cable extractor tool for flat plug-in sockets, LSK contacts

y 8 mm

‘

RCode g S €‘

96746204 2040 1 558.75‘

Tool set KABELEX®1550 BMW13 pieces, for BMW.Content:No1501, 1502, 1504, 1508:

ejection tools for contact sizesO 1.5; 3.5 and 2.5 mm

No1511, 1512, 1514, 1518:dismantling sleeves for contactsizes O 1.5; 3.5 and 2.5 mm

No1553: cable extractor for plugswith single release channel y 2.8 mm and 5.8 mm

No1578K-1: cable extractor for SLK contacts (primary) y 2.8 mmNo1578K-2: cable extractor for SLK contacts 97 (primary and secondary)

y 2.8 mmNo1591: cable extractor tool for contact sizes y 2.8 and 5.8 mmNo1589K: cable extractor tool for flat plug-in sockets, LSK contacts

y 8 mm

‘

RCode g S €‘

96746207 1795 1 392.50‘

%

273

10

Tool set KABELEX®1700MAN/Volvo

14 pieces, for MAN/Volvo, Mercedes-Benz trucks.Content:No1501, 1502, 1503, 1506:

ejection tools for contact sizesO 1.5; 3.5; 4.0 (ABS) and 4.0 mm

No1511, 1512, 1513, 1516:dismantling sleeves for contactsizes O 1.5; 3.5; 4.0 (ABS) and 4.0 mm

No1523: assembly sleeve (ABS)No1553, 1591: cable extractor tools for contact sizes

y 2.8 and 5.8 mmNo1576: cable extractor tool for flat plugs without box y 2.8 mmNo1577: cable extractor tool for VKR Box contacts yNo1577-1: cable extractor tools for MKR/MKS contacts y 1.5 mm

‘

RCode g S €‘

96746208 1815 1 470.15‘

Tool set KABELEX®1720Renault/PSA

7 pieces, for Renault/PSA (Citroën and Peugeot).Content:No1505: ejection tool for contact

sizes O 2.3 mmNo1515: dismantling sleeve for

contact sizes O 2.3 mmNo1553, 1554, 1591: cable extractor

tools for contact sizesy 2.8 and 5.8 mm

No1556: cable extractor tool forMicro-Timer II, III contactsy 1.6 mm

No1574: cable extractor tool for Micro-Timer I contacts y 1.6 mm

‘

RCode g S €‘

96746210 670 1 231.25‘

Tool set KABELEX®156010 pieces, for round plugconnections (incl. ABS).Content:1 each No 1501: ejection tool for

contact sizes O 1.5 mm1 each No 1502: ejection tool for

contact sizes O 3.5 mm1 each No 1503: ejection tool for

contact sizes O 4.0 mm assembly or dismantling sleeve(ABS)

2 each No 1511: dismantlingsleeves for contact sizes O 1.5 mm (1 each mounted)

2 each No 1512: dismantling sleeves for contact sizes O 3.5 mm (1 each mounted)

2 each No 1513: dismantling sleeves for contact sizes O 4.0 mm (1 each mounted)

1 each No 1523: assembly sleeve (ABS)

‘

RCode g S €‘

96746201 520 1 159.30‘

Basic set KABELEX®1570/16 pieces.Content:No1501, 1502: ejection tools for

contact sizes O 1.5 and 3.5 mmNo1511, 1512: dismantling sleeves


No1553, 1591: cable extractor toolsfor contact sizesy 2.8 and 5.8 mm

‘

RCode g S €‘

96746303 710 1 169.25‘

Universal set KABELEX®1570/212 pieces.Content:No1501, 1502, 1505: ejection tools

for contact sizesO 1.5; 3.5; 2.3 mm

No1511, 1512, 1515: dismantlingsleeves for contact sizes O 1.5; 3.5; 2.3 mm

No1553: cable extractor tool forplugs with one release channel y 2.8 and 5.8 mm

No1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mmNo1559: cable extractor tool for Maxi-Power Timer contacts y 9.5 mmNo1562: cable extractor tool for Pit-Pod contactsNo1574: cable extractor tool for Micro-Timer I contacts and ABS plug-in

housing y 1.6 mmNo1591: cable extractor tool for plugs with two release channels

y 2.8 and 5.8 mm

‘

RCode g S €‘

96746304 1130 1 377.90‘

Tool set KABELEX®15905 pieces, for flat plug-in sockets.Content:No1551, 1552: cable extractor tools

for flat plug-in socketsy 2.8 and 5.8 mm in terminalswith double release channel

No1553, 1554, 1555: cableextractor tools for contact sizesy 2.8 and 5.8 mm in terminalswith single release channel

‘

RCode g S €‘

96746202 360 1 144.60‘

%


274

10

Ejection tools KABELEX®1501–1508for round snap-in receptacles,including dismantling sleeve.

‘

for contact sizes RCode No O mm g S €‘

96746230 1501 + 1511 (e.g. BMW, Mercedes-Benz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 1.5 37 1 34.70

96746231 1502 + 1512 (e.g. BMW, Mercedes-Benz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 3.5 59 1 38.25

96746232 1503 + 1513 for ABS (trucks) or assembly sleeve No 1523 (e.g. Mercedes-Benz, MAN, Scania) 4.0 79 1 50.95

96746233 1504 + 1514 (e.g. BMW, Mercedes-Benz, Opel) 2.5 60 1 39.75

1

96746234 1505 + 1515 (e.g. Ford, Opel, PSA, Renault) 2.3 46 1 35.25

96746235 1506 + 1516 (e.g. Mercedes-Benz trucks, MAN, Scania) 4.0 72 1 51.20

96746236 1507 + 1517 (e.g. Scania gears GRS 900) 1.5 72 1 42.15

96746037 1508 + 1518 (e.g. BMW, Mercedes-Benz) 1.5 46 1 50.15

‘

Dismantling sleeves KABELEX®1511–1518

‘

for contact sizes L inside outside RCode No O mm mm O mm O mm g S €‘

78600001 1511 for No 1501 1.5 30 2.9 3.3 1 10 1.9078600002 1512 for No 1502 3.5 30 4.4 5.0 1 10 2.1578600003 1513 for No 1503 4.0 45 6.0 6.5 1 10 2.6578600004 1514 for No 1504 2.5 30 4.0 4.4 1 10 2.551

78600005 1515 for No 1505 2.3 35 3.0 3.3 1 10 2.4578600006 1516 for No 1506

(for MOLEX contacts 4.0 mm ) 4.0 35 5.6 6.0 1 10 2.90

78600016 1516-A for No 1506 (for AMP contacts 4.0 mm) 4.0 30 5.4 5.8 1 10 2.90

78600007 1517 for No 1507 1.5 26 2.3 2.8 1 10 2.651

78600018 1518 for No 1508 (3 x 120° slotted) 1.5 32 2.7 3.5 1 5 9.35

‘

Assembly sleeve KABELEX® ABS1523for No 1503

‘

for contact sizes L inside outside RCode O mm mm O mm O mm g S €‘

78610001 4.0 50 4.0 6.5 5 3 11.30‘

Cable extractor tools KABELEX®1551/1552for flat snap-in receptacles e.g.BMW, Ford, Opel, Porsche, Seat,Skoda, VW/Audi.

‘

for contact sizes RCode No y mm g S €‘

74620001 1551 2.8 19 1 33.1074640002 1552 5.8 19 1 34.20‘

Cable extractor tools KABELEX®1553–1555for flat plug-in sockets locked interminals with single releasechannel.‘

for contact sizesRCode No y mm g S €‘

74620003 1553 (e.g. BMW, Mercedes-Benz, Ford, MAN, Opel, Porsche, PSA, Renault, Seat, Skoda, VW/Audi) 2.8; 5.8 16 1 19.80

74620004 1554 (e.g. BMW, PSA, Renault) 2.8 16 1 19.5074620005 1555 (e.g. BMW) 5.8 16 1 20.60‘

Cable extractor tool KABELEX®1556for flat plug-in sockets, Micro Timer II, III contacts, e.g. Mercedes-Benz, Opel, Porsche, PSA, Renault, Saab, Seat, Skoda, VW/Audi.‘

for contact sizes RCode y mm g S €‘

74620006 1.6 17 1 56.00‘

Cable extractor tool KABELEX®1556-1for flat plug-in sockets withasymmetrically positioned latches interminals with two release channels,Seat, Skoda, VW/Audi.

‘


74612006 0.64 19 1 57.50‘

Cable extractor tools KABELEX®1557/1558for flat plug-in sockets withasymmetrically positioned latches interminals with two release channels,Seat, Skoda, VW/Audi.

‘


74620007 1557 2.8 21 1 45.1074620008 1558 4.8 22 1 47.30‘

Cable extractor tool KABELEX®1559for flat plug-in sockets, Maxi Power Timer contacts,Mercedes-Benz, VW/Audi.

‘


74620009 9.5 39 1 48.30‘

Cable extractor tool KABELEX®1562for flat plug-in sockets,Pit-Pod contacts, all vehicle makes.

‘


74620012 various 25 1 43.20‘

%

275

10

Cable extractor tool KABELEX®1564*for flat plug-in sockets, Ducon contacts in terminals withsingle release channel, Opel.

‘


74620014 1.5 19 1 29.10‘


Cable extractor tools KABELEX®1565–1568for flat plug-in sockets, Ducon-contacts in terminals withtwo release channels, Opel.

‘


74620015 1565* 1.5 18 1 33.4074620016 1566* 2.8 19 1 34.0074620017 1567* 4.8; 6.3 22 1 34.3074620018 1568* 9.5 45 1 31.50‘


Cable extractor tool KABELEX®1572for flat plug-in sockets withasymmetrically positioned latches in terminals with two release channels, Ford, Renault.

‘


74620022 2.8 18 1 50.50‘

Cable extractor tool KABELEX®1574for flat plug-in sockets, Micro-Timer Icontacts and ABS plug-in housing,Fiat, Ford, Mazda, Opel, PSA,Renault, Saab, VW/Audi.

‘


74620024 1.6 15 1 24.20‘

Cable extractor tool KABELEX®1575for round soldered pin contacts, Ford, for flat plug-in sockets(retention by locking device onterminal), Fiat, Mazda, Toyota.

‘

for contact sizes for contact sizes RCode O mm y mm g S €‘

74620025 1.5 2.8; 5.8 15 1 19.10‘

Cable extractor tool KABELEX®1576for flat plug-in sockets with singlelatch (flat plug without box), e.g. MAN.

‘


74620026 2.8 18 1 45.10‘

Cable extractor tool KABELEX®1577for flat plug-in sockets, VKR Box contacts, e.g. MAN.

‘

RCode g S €‘

74620027 49 1 69.50‘

Cable extractor tool KABELEX®1577-1for flat plug-in sockets, MKR/MKS contacts, e.g. MAN/Volvo.

‘


74615027 1.5 23 1 62.00‘

Cable extractor tool KABELEX®1578K-1for flat plug-in sockets, SLK contacts (primary),e.g. BMW, Mercedes-Benz.

‘


74610028 2.8 35 1 36.60‘

Cable extractor tool KABELEX®1578K-2for flat plug-in sockets, SLK contacts 97 (primary, secondary), e.g. BMW, Mercedes-Benz. ‘


74612028 2.8 35 1 49.10‘

Cable extractor tools KABELEX®1584/1585for round soldered contacts,Mercedes-Benz.

‘

for contact sizes RCode No O mm g S €‘

74620034 1584 4.0 13 1 22.0074620035 1585 2.5 11 1 21.60‘

Cable extractor tool KABELEX®1587for flat plug-in sockets,E-95 contacts, Mercedes-Benz.

‘


74620037 1.65 23 1 56.50‘

%


276

10

Cable extractor tool KABELEX®1588*for GSK flat fuse contacts (1, 2 and 3 terminal version; 2, 4 and 6 latches), Mercedes-Benz.

‘

RCode g S €‘

74610038 23 1 49.80‘


Cable extractor tool KABELEX®1589Kfor flat plug-in sockets, LSK contacts, e.g. BMW, Mercedes-Benz.‘


74610039 8 45 1 36.80‘

Cable extractor tool KABELEX®1591for flat plug-in sockets in terminalswith two release channels, JuniorPower Timer contacts, StandardPower Timer contacts, e.g. BMW,Mercedes-Benz, Fiat, Ford, MAN, Opel, PSA, Renault, Saab, VW/Audi.

‘


74620041 2.8; 5.8 25 1 58.00‘

$ Car body repair tools and pullersPanel beating set10980

7 pieces, in steel case.Content:Hammers: No 10785; 10790;Dollies: No 10838; 10841; 10861;

10865;Pliers: No 10935

‘

RCode kg S €‘

98812001 7.35 1 282.60‘

Panel beating set1099817 pieces, in steel case No 83/09.Content:Hammers: No 10775; 10785; 10790;

10811; 10950; 10955/35;Dollies: No 10830; 10835; 10840;

10850; 10861; Pliers: No 10910; 10930;Special Spoons: No 10890; 10895;

10900;Body File Holder: No 10905; Padlock: No 12932

‘

RCode kg S €‘

98812101 18.3 1 841.80‘

Dinging hammer10775

‘


70130002 30/40 300 155 516 2 38.10‘

Special planishing hammer10776large extra thin faces,square face chequered.

‘

O u L1 L2 RCode mm mm mm mm g S €‘

70130010 46 40 320 115 521 2 73.50‘

Planishing hammer10780short.

‘


70130003 32 25 300 100 346 2 33.50‘

Planishing hammer10785short, round face chequered.

‘


70130004 40 35 300 96 484 2 52.50‘

Pecking hammer10790with round face and ball pein.

‘


70130005 18/41 300 158 480 2 40.10‘

Pecking hammer10795with round face and acornshaped pein.

‘


70130006 20/41 300 160 460 2 40.00‘

%$

277

10

Pecking hammer10800short, round flat faceand pointed pein.

‘


70130007 35 300 135 360 2 40.00‘

Pecking hammer10805round flat face,oblong, thin pein,approx. 1 mm thick.

‘


70130008 40 300 160 450 2 42.90‘

Pecking hammer10806extra large thin faceand pein.

‘


70130011 40 300 135 382 2 56.50‘

Planishing and grooving hammer10811

‘

O y L1 L2 RCode mm mm mm mm g S €‘

70130012 30 36 x 10 320 160 531 2 33.80‘

Planishing and grooving hammer10812

‘

O y L1 L2 RCode mm mm mm mm g S €‘

70130013 30 25 x 5 300 115 350 2 35.20‘

Dolly10830

‘

L b h RCode mm mm mm g S €‘

70210001 80/100 70/45 65 1450 1 59.00‘

Planishing anvil10832

‘

RCode faces/mm g S €‘

70210015 85 x 55 / 45 x 40 1160 1 59.50‘

Wedge dolly10835

‘


70210002 130 55 32 958 1 55.50‘

Anvil dolly10838

‘


70210003 75 60 50 1068 1 40.00‘

Special anvil dolly10840

‘


70210004 70 57 70 1250 1 54.00‘

Thin dolly10841

‘


70210005 107 66 28 984 1 41.10‘

Diabolo dolly10842

‘

O h RCode mm mm g S €‘

70210006 57 60 658 1 40.10‘

$


278

10

Toe dolly10845

‘


70210008 120 55 22 770 1 41.10‘

Anvil block10850axe shape.

‘


70210009 65/50 25/8 140 860 1 36.60‘

Universal anvil dolly10855

‘


70210010 70/60 50/45 58 1200 1 61.00‘

Toe dolly10861chequered surface.

‘


70210014 120 55 30 1033 1 43.60‘

Heel dolly10865

‘


70210012 80 60 35 1070 1 40.30‘

Dolly10866with three flat and threeshaped faces.

‘


70210016 115 48 48 1550 1 64.00‘

Bumping spoon10880

‘

L1 L2 RCode mm mm g S €‘

70220001 460 200 1900 1 68.00‘

L1 = length overallL2 = working length‘

Bumping spoon10885

‘


70220002 500 2210 1 81.50‘

Body spoon10890

‘


70220003 270 130 520 1 32.70‘

Body spoon10895

‘


70220004 390 200 970 1 53.00‘

L1 = length overallL2 = working length‘

Flange tool10900with leather cap.

‘


70220005 400 1100 1 31.50‘

Soldering wedges, wood109255 pieces.

‘

RCode g S €‘

77530001 364 1 21.80‘

$

279

10

Pry bar11005head and point polished.

‘


72090000 400 14 500 6 38.50‘

Lever bar11006special steel, bright nickel-plated.

‘

L W RCode mm mm g S €‘

72090002 400 14 500 6 30.50‘

Lever bar11007special steel, bright nickel-plated.

‘

L W RCode mm mm g S €‘

72090003 400 17 643 6 44.70‘

Body file holder10905with coarse blade.

‘


72160000 365 35 110 760 2 87.00‘

L = Length, b = Width, h = Height‘

Body file holder10923wooden, for flat blades.

‘


72200002 530 300 1 23.40‘

Spare blades for No 10905 and No 10923

‘

teeth L RCode No per inch mm g S €‘

79060001 10906 fine, radial cut 15 350 321 10 37.50

79060002 10907 medium, radial cut 12 350 286 10 36.70

79060003 10908 coarse, radial cut 9 350 279 10 32.30

79060012 10915 medium, angled cut 12 350 282 10 32.00

1

79060013 10916 coarse, angled cut 9 350 252 10 30.30

‘

Body file holder10922wooden, for half round radiusfile blades.

‘


72200001 530 260 1 25.50‘

File blades for No 10922

‘

teeth L RCode No per inch mm g S €‘

79060014 10917 coarse, without swarf breaker, half round, angled cut 9 350 208 5 31.70

79060004 10921 coarse, without swarf breaker, half round, radial cut 9 350 216 5 41.50

‘

Tin snips12752lever action, spring-assistedfor self-opening action.Heavy duty cutting: sheet steel up to1.8 mm or stainless steel sheetup to 1.2 mm.

‘

L L RCode shape mm '' g S €‘

75230001 L 1) 260 10 1/2 532 1 67.0075230002 R 2) 260 10 1/2 532 1 66.50‘

1) left hand cutting2) right hand cutting‘

Tin snips12753lever action, spring-assistedfor self-opening action.Heavy duty cutting: sheet steel sheetup to 1.8 mm or stainless steel sheet up to 1.2 mm.

‘

L L RCode shape mm '' g S €‘

75240001 L 1) 260 10 1/2 473 1 66.0075240002 R 2) 260 10 1/2 473 1 66.00‘

1) left hand cutting2) right hand cutting‘

Set-off pliers10642for offsetting sheet metaledges up to 1 mm thickness,ensuring shoulder free surface.Handles fitted with H.D. plastic sleeves.

‘

jaw width L RCode size mm mm g S €‘

76490001 1 15 300 831 1 82.5076490002 2 30 300 847 1 84.00‘

Punch pliers10643for use on sheet metal up to 1 mm thickness (hole spot welding – MAGwelding technique). Use in conjunction with setoff pliersNo 10642.Handles fitted with H.D. plasticsleeves.

‘

O L RCode size mm mm g S €‘

76590002 2 5.5 300 806 1 125.00‘

$


280

10

Spot weld milling cutter12727HSSE steel, for spot-weld removalon car body or sheet metalconstruction. Replaceable millingcutter size 10 mm. Cutting depth adjustment by set screw, avoidsdistortion damage to sheet metal.

‘


72260001 72 19 5 25.10‘

Replacement milling cutter12728

‘


79260001 13 4 10 11.40‘

Spot weld drillsfor clean, burr-free removal ofspot-weld. Self-cutting centre pointavoids running off spot weld.Can be reground.

‘

O RCode No mm g S €‘

72270007 12729 7 18 5 17.9072270008 12730 8 24 5 22.00‘

Tools for vehicle doors

Universal alignment tool for automobile doors

12769

Scope of application:Almost all car and van doors, bootlids and hatchback doors.The application for this tool is doorlocks and door guide pins.Also suitable on door lock shackles,i.e. as on Opel and Mercedes-Benz. The universal alignment tool issupplied with 3 different, interchangeable special bolts, housed within thetubular handle. The handle bend is reinforced by a twin tube.

‘


74450010 720 1815 1 191.00‘

Lever bar12770powder coated for improvedslide effect, for removal of doorstrims in cars.

‘


74590101 260 150 5 19.90‘

Lever bar12770/2for levering off fragile caps,decorative trim (strips and rings),switches, rubber or fabric trim withoutdamaging them. Finely honed, rounded edges ensure the vehiclepaintwork and surrounding materials are not damaged or scratched.

‘


74590102 185 20 1 22.90‘

Plastic lever bar12770/3for removing trim and rubbing stripsof all kinds on bodywork and aroundwindscreens, rear and side windows. The broad area of contact preventsdamage such as scratching of painted surfaces, deformation of strips anddamage of glass.

‘


74590003 300 209 1 39.20‘

Tools for fitting/removing vehicle glass

Windscreen replacement setVERITRAC

10350N

1 guide handle1 draw handle1 coil cutting wire (50 m)2 double suction lifters

‘

RCode g S €‘

98742711 1760 1 314.50‘

Windscreen removal set VERITRAC10351Nas 10350N, but withoutdouble suction lifters.

‘

RCode g S €‘

96742711 458 1 90.50‘

Two double suction lifters10352Suction cap dia. 120 mm,mechanical action with safety lock.Special ABS-plastic, oil andacid resistant.With belt slots in the handles.Carrying capacity 60 kg.

‘

RCode g S €‘

74280001 1405 1 224.00‘

$

281

10

Double suction lifter10352/1Suction cap dia. 120 mm,mechanical action with safety lock.Special ABS-plastic,oil and acid resistant.With belt slots in the handles.Carrying capacity 60 kg.

‘

RCode g S €‘

74280005 695 1 112.00‘

Draw handle10351/1for drawing cutting wire throughadhesive seal.

‘

RCode g S €‘

74270001 90 1 26.90‘

Guide handle10351/2for fixing and clampingcutting wire inside vehicle.

‘

RCode g S €‘

74270002 196 1 31.40‘

Guide handle10351/3for fixing and clamping cutting wireinside vehicle. Extra long extensionmakes it especially suited torecessed glass.

‘

RCode g S €‘

74270006 190 1 38.60‘

Spare cutting wireSD10351Nspecial alloy steel 0.6 x 0.6 mm.Easy wire removal without the restunrolling.

‘

L RCode m g S €‘

79270011 50 170 1 32.20‘

Tension strap with ratchet10354for clamping and fixing freshlyfitted vehicle glass,synthetic webbing.

‘

Width RCode mm g S €‘

74270003 25 375 1 17.90‘

Wire insert probe10355for threading cutting wire through hardenedadhesive, 2.5 mm steel tubing with brasshandle.

‘

RCode g S €‘

74270004 91 1 22.00‘

Wire insert awl1474/2for feeding or pulling cutting wirethrough hardened adhesive.

‘

RCode g S €‘

78030102 69 2 19.70‘

Flat scraper12718for removing residuesof sealant and adhesive.

‘


72030101 265 160 5 17.50‘

Scraper10356for removing residues of adhesive andstickers from vehicle glass. Blade 40 mmwide, 0.3 mm thick, interchangeable withcover.‘

Length Width RCode mm mm g S €‘

74270005 165 40 90 1 9.70‘

Spare blades10356R10 pieces dispenser.

‘

RCode g S €‘

79270015 45 1 6.50‘

Scraper with reversible tungstensteel blade

12749

for removing residues of adhesiveand stickers from vehicle glass. Can also be used for scraping metal and seals. Includes angled inner hex. screwdriver.

‘


72310101 495 582 1 72.50‘

Spare blade12749Rfor scraper No 12749.

‘

RCode g S €‘

79310001 19 1 48.50‘

$


282

10

Workshop sets

Tool set806/1099 Tools, in plastic inlays (modular system see page 33–43), 9x1/3 and1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM,Magazine case No 920 and Wheely box No 922N.

‘

RCode kg €‘

98830001 13.35 1054.50‘


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;12 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 100 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm)size 5 (1.6 x 8.0 x 175 mm)

‘

No 4630 sizes 1; 2; 3‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

No 10956 O 35 mm‘

No 10960 500 g‘

96838126 96838127

96838128

96838112

96838110

96838113

96838237 96838121

96838123 96838125

283

10

TCS tool set806/9 TCS

xö98 Tools, in TCS inlays (Tool Control System see page 44–59), 7x1/3,1x2/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G,Tool trolleys 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM,Magazine case No 920 and Wheely box No 922N.

‘

RCode kg €‘

98830004 12.53 1135.15‘

96838175 96838176

96838177 96838278

96838179

96838181

96838183

96838180

96838182


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24 mm

‘

No 40 1/4'' a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 10760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘


‘

No 4630 sizes 1; 2; 3‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 51 6 240‘

No 65 64 2 250‘

No 66 02 5 160‘

No 102 175 mm‘

No 108 150 x 6; 175 x 6 mm‘

No 109 size 6; 100 x 3.4 mm‘

No 10956 O 35 mm‘

No 10960 500 g‘





284

10

Workshop set for Audi1110 TCS

xö210 tools, in TCS inlays (Tool Control System see page 44–59),7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers.‘

RCode kg €‘

97830800 22.9 2485.40‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘


‘



‘

No 40 1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13; 14 mm

‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 409 3/8'' D 1/4'' a‘

No 50 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17;19 mm

‘

No 54KK 1/2'' a sizes 5; 6; 7; 8; 10 mm‘

No 54X 1/2'' a sizes M8; M10; M12; M14;M16

No 59X 3/4'' a size M18‘

No 1054X/M8 1/2'' a 80 mmNo 3054X/M10 1/2'' a 140 mmNo 3054X/M12 1/2'' a 140 mmNo 3054X/M14 1/2'' a 140 mm

‘

No 54TX 1/2'' a sizes T50; T55; T60‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 509W/3 1/2'' D a 75 mm‘

No 509W/5 1/2'' D a 130 mm‘

No 509W/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm ‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 514 3/4'' D 1/2'' a‘

No 1162 0.6 x 3.5 mmNo 1166 1.0 x 5.5 mmNo 1167 1.2 x 8.0 mm

‘

No 1220–1223 sizes 0; 1; 2; 3‘

No 1350 size M4No 1356 size M5No 1357 size M6No 1358 size M8No 1359 size M10

‘

No 1410 size T6No 1411 size T7No 1412 size T8No 1413 size T9No 1414 size T10No 1415 size T15No 1416 size T20No 1417 size T25No 1418 size T27No 1419 size T30No 1420 size T40

‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm;1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm

‘

9683 0875 9683 8751

9683 0880 9683 0166

9683 0877 9683 0879

9683 0878 9683 0876

9683 8184 9683 0622

83820360 9683 0609

285

10

No 4830 sizes 1; 2; 3‘


‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm ‘


‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 64 2 250‘

No 65 72 6 240‘

No 66 02 5 160‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500 g‘

No 12373‘

No 12600 500 g‘

No 12718‘

No 12931 3 m‘

No 39 Pkw 400 mm‘

Workshop set for BMW vehicles2500 TCS

xö285 tools, in TCS inlays (Tool Control System see page 44–59),7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers.

‘

RCode kg €‘

97830600 23.7 3534.10‘

96838192 96830679

96830605 96830602

96830603 96838177

96830607 96830706

96830608 96830604

96830622 96830609


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

‘


‘


No 40 1/4'' a sizes 3; 5; 5.5; 6; 7; 8; 9; 10;11; 12; 13; 14 mm

‘

No 40L 1/4'' a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9;10; 11; 12; 13 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 409 3/8'' D 1/4'' a‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 46 3/8'' a sizes 10; 11; 12; 13 mm‘



286

10

No 47 3/8'' a sizes 10; 11; 12; 13; 14; 15; 16 mm

‘

No 49 3/8'' a sizes 5; 6; 7 mmNo 1049-9 3/8'' a size 9 mm

‘

No 49X 3/8'' a sizes M6; M8; M10‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 435 3/8'' D‘

No 452 3/8'' D‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 54 1/2'' a sizes 8; 10; 12; 14; 17 mm‘

No 509QR/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509QR/10 1/2'' D a 255 mm (2x)‘

No 506 1/2'' D 300 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 514 3/4'' D 1/2'' a‘

No 2309K 1/2'' a sizes 17; 19 mm‘

No 12506 sizes 6; 7 mm‘


‘


No 44KTXB 1/4'' a sizes T10; T15; T20; T25; T27;T30; T40

‘

No 45TX 3/8'' a sizes E10; E12; E14‘


No 49TX 3/8'' a size T40‘


No 54TX 1/2'' a sizes T45; T50; T55; T60No 54TXB 1/2'' a sizes T30; T40; T45; T50

‘

No 409M 3/8'' D 1/4'' a‘

No 415B 1/4'' b‘

No 1410 size T6No 1411 size T7No 1412 size T8No 1413 size T9No 1440 size T10No 1441 size T15No 1442 size T20No 1443 size T25No 1444 size T27No 1445 size T30No 1446 size T40No 1427 size T25 (65 mm)No 1435 size T55

‘

No PZ1221 size 1No PZ1222 size 2No PZ1223 size 3

‘

No 736/40 5/16'' b size D8‘

No 3115/1 1/4'' D E‘


‘



‘

TORX® controller‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘


‘

No 4830 sizes 1; 2; 3No 4840 size 1

‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 43 4 002‘

No 65 44 4 021‘

No 65 45 4 002‘

No 65 46 4 021‘

No 65 64 2 250‘

No 65 72 6 240‘

No 66 02 5 160‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 40 mm‘

No 10960 500 g‘

No 12373‘

No 12600 500 g‘

No 12718‘

No 12922E‘

No 12931 3 m‘


No 7756‘

287

10

Workshop set for BMW motorbikes2501N TCS

xö U214 tools, in TCS inlays (Tool Control System see page 44–59),2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers.

‘

RCode kg €‘

97830606 23.3 2563.40‘


‘

No 13 sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13;14; 15; 16; 17; 18; 19; 20; 21; 22; 23;24; 27; 29; 30; 32; 34 mm

‘

No 40 1/4'' a sizes 4; 5; 5.5; 6; 7; 8; 9; 10;11; 12; 13 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mmNo 405/4 1/4'' D a 100 mm

‘

96832096 96832095

96832098 96832101

96832099 96832100

96832102

96832097 96830622

No 407 1/4'' D a 38 mm‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 456 3/8'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 46 3/8'' a size 20.8 mm-13/16''No 4600 3/8'' a size 16 mm-5/8''No 4606 3/8'' a size 18 mm-11/16''

‘

No 49 3/8'' a sizes 5; 6; 8 mm‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16;17; 18; 19; 21; 22; 24; 27; 30; 32;34 mm

‘

No 54 1/2'' a sizes 10; 12 mm‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 21TX sizes E6 x E8; E10 x E12‘


No 44KTXB 1/4'' a sizes T8; T10; T15; T20; T25;T27; T30; T40

‘

No 45TX 3/8'' a sizes E8; E10; E12; E14‘

No 49TX 3/8'' a sizes T25; T45No 54TX 1/2'' a sizes T40; T50; T55; T60

‘

No 1054TX 1/2'' a sizes T50; T55No 2054TX 1/2'' a sizes T40; T45

‘


‘


‘

No 4621 size 0 (0.4 x 2.5 x 80 mm);size 1 (0.5 x 3.5 x 90 mm);size 2 (0.6 x 4.0 x 100 mm);size 4 (1.0 x 6.5 x 140 mm);size 5 (1.2 x 8.0 x 160 mm)

‘

No 4631 sizes 1; 2‘

No 4632 sizes 1; 2; 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10506 0.8 x 4 x 300 mm‘

No 10518 1.0 x 5.5 x 410 mm‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 10768 sizes 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 12507-2K sizes 8; 10 mm‘



288

10

No 10 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32; 34 x 36 mm

‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘


‘

No 21 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;21 x 24; 27 x 32; 30 x 34 mm

‘

No 24 sizes 10 x 11; 12 x 14 mm‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 34 5 280‘

No 65 35 5 200‘

No 65 43 4 001No 65 43 4 002

‘

No 65 45 4 001No 65 45 4 002

‘

No 65 72 6 240‘

No 66 02 5 160‘

No 102 150 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 2.5; 150 x 3; 150 x 4; 150 x 5;150 x 6; 150 x 8 mm

‘

No 10356‘

No 10670 285 mm‘

No 10672 20 x 315 mm‘

No 10957 O 40 mm‘

No 10960 300; 500 g‘

No 12374‘

No 12600 500 g‘

No 12900N‘

No 12922E O 6 mm‘

No 12965‘

Tool set for Mercedes-Benz cars3026N/1 TCS

xö279 tools, in TCS inlay (Tool Control System see page 44–59),5x1/3, 5x2/3 and 3x3/3 inlays for 8 drawers.

‘

RCode kg €‘

97830008 26.6 3177.05‘

96830167 96830217

96830218 96830163

96831168 96830226

96830164 96830165

96830166

96830227

96830219

96838179 96830323

289

10

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409 3/8'' D 1/4'' a‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 50 1/2'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 30 mm

‘

No 52 1/2'' a sizes 12; 17; 18; 19; 20; 21; 22;24; 25; 27; 30; 32 mm

‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 513 3/8'' D 1/2'' a‘

No 514 3/4'' D 1/2'' a‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17;19 mm

‘

No 55 3/4'' a size 36 mm‘

No 2309K 1/2'' a sizes 17; 19 mm‘

No 12506 sizes 6; 7 mm‘


‘



‘

No 45TX 3/8'' a sizes E10; E12; E14‘



No 49X 3/8'' a sizes M6; M8; M10‘



‘

No 409M 3/8'' D 1/4'' a‘

No 415SGB 1/4'' b‘


‘

No PZ1221 size 1 (2x)No PZ1222 size 2 (2x)No PZ1223 size 3

‘

No 3115/1 1/4'' D E‘


‘



‘



‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 size 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 51 6 240‘

No 65 64 2 175‘

No 66 02 5 160‘

No 102 200 mm‘

No 103 150 mm‘

No 105 120 x 10 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8; 200 x 8 mm

‘

No 10672 20 x 315; 25 x 365 mm‘

No 10957 O 40 mm‘

No 10960 500; 800 g‘

No 12377‘

No 12600 3000 g‘

No 12718‘


290

10

Tool set for Mercedes-Benz HGVs3022N/1 TCS

xö308 tools, in TCS inlay (Tool Control System see page 44–59),6x1/3, 2x2/3 and 7x3/3 inlays for 11 drawers.

‘

RCode kg €‘

97830009 47.3 4120.50‘


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24; 27; 30; 32;34 mm

‘

No 14 size 24 mm‘


‘

No 21 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;21 x 24; 27 x 32; 30 x 34 mm

‘

No 24 sizes 10 x 11; 12 x 14 mm‘

No 40 1/4'' a sizes 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm

‘

No 41K 1/4'' a, r 0.6 x 3.5; 1.0 x 5.5;1.2 x 8 mm

‘

No 44K 1/4'' a, E 3; 4; 5; 6; 8 mm‘

No 44P 1/4'' a, k sizes 1; 2; 3; 4‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/2 1/4'' D a 54 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409 3/8'' D 1/4'' a‘

No 412 1/4'' b a‘

No 415 1/4'' D‘

No 456 3/8'' a sizes 7; 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 20; 21; 22 mm

‘

No 427/3 3/8'' D a 76 mm‘

No 427/5 3/8'' D a 125 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 431 1/4'' D 3/8'' a‘

No 432 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 50 1/2'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19; 30 mm

‘

96830222

96830221

96830177

96830167 96830217

96830165

96830220

96830166

96830218 96830172

96830225 96838179

96830324

96831179

96830178

291

10

No 52 1/2'' a sizes 12; 17; 18; 19; 20; 21; 22;24; 25; 27; 30; 32 mm

‘

No 504/15 1/2'' D 397 mm‘

No 506 1/2'' D 300 mm‘

No 509/2 1/2'' D a 52 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm (2 x)‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 54 1/2'' a sizes 5; 6; 7; 8; 10; 12; 14; 17;19 mm

‘

No 51IMP 1/2'' a sizes 24; 27 mm‘

No 2309 1/2'' a size 22 mmNo 2309K 1/2'' a sizes 17; 19 mm

‘


‘



‘

No 45TX 3/8'' a sizes E10; E12; E14‘


No 49X 3/8'' a sizes M6; M8; M10‘



‘

No 409M 3/8'' D 1/4'' a‘

No 415SGB 1/4'' b‘


‘

No PZ1221 size 1 (2x)No PZ1222 size 2 (2x)No PZ1223 size 3

‘

No 3115/1 1/4'' D E‘


‘



‘


No 55 3/4'' a sizes 22; 24; 27; 30; 32; 34; 36;38; 41; 46; 50 mm

‘

No 552 3/4'' D‘

No 556 3/4'' D‘

No 559/8 3/4'' D a 200 mmNo 559/16 3/4'' D a 400 mm

‘

No 558 510 mm‘

No 568 1/2'' D 3/4'' a‘


‘

No 4628 size 1 (0.4 x 2.5 x 60 mm)‘

No 4630 sizes 1; 2; 3‘

No 4632 size 4‘

No 4640 sizes 0; 1; 2‘

No 4660 VDE size 1 (0.4 x 2.5 x 75 mm)‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘


‘

No 10760CV sizes 12; 14; 17; 19; 22 mm‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 01 5 180‘

No 65 29 5 200‘

No 65 51 6 240‘

No 66 02 5 160‘

No 102 200; 300 mm‘

No 103 175 mm‘

No 105 120 x 12 mm‘

No 108 150 x 3; 150 x 4; 150 x 5; 150 x 6;150 x 8 mm

‘

No 10957 O 50 mm‘

No 10960 500; 800; 1000 g‘

No 11006 400 mmNo 11007 400 mm

‘

No 12025 210 mm‘

No 12036 260 mm‘

No 12374‘

No 12600 3000 g‘

No 12718‘

No 12931 3 m‘


292

10

Tool set for Porsche1100 TCS


‘

RCode kg €‘

97830411 24.7 2791.50‘

No 12 sizes 5.5; 12; 14 mm (2x)‘

No 13 sizes 7; 11 mm (2x);sizes 6; 8; 9; 10; 12; 13; 14; 15;16; 17; 18; 19; 20; 22; 24; 30; 32;36 mm (1x)

‘

No 14 size 17 mm‘

No 20 sizes 10 x 11; 12 x 13; 14 x 15; 17 x 19; 19 x 22 mm

‘


‘

No 24 sizes 8 x 10; 11 x 13; 12 x 14;17 x 19; 22 x 24 mm

‘


‘

No 40 1/4'' a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8;9; 10; 11; 12; 13 mm

‘

No 44 1/4'' a sizes 3; 4; 5; 6 mm‘

No 400 1/4'' D 150 mm‘

No 404 1/4'' D 116 mm‘

No 405/6 1/4'' D a 150 mm‘

No 407 1/4'' D a 38 mm‘

No 409M 3/8'' D 1/4'' a‘

No 415 1/4'' D‘

No 45 3/8'' a sizes 8; 9; 10; 11; 12; 13; 14;15; 16; 17; 18; 19 mm

‘

No 46 3/8'' a size 20.8 mm-13/16''‘

No 49 3/8'' a sizes 4; 5; 6; 7; 8; 10 mm‘

No 425 3/8'' D 165 mm‘

No 427/3 3/8'' D a 76 mm‘

No 427/10 3/8'' D a 240 mm‘

No 428 3/8'' D a 46 mm‘

No 432M 1/2'' D 3/8'' a‘

No 435 3/8'' D‘

No 50 1/2'' a sizes 19; 21; 22; 24; 27; 30;32 mm

‘

No 52 1/2'' a sizes 16; 17; 18; 19; 22; 24; 27;30; 32 mm

‘

No 54 1/2'' a sizes 6; 7; 8; 10 mm‘

No 54X 1/2'' a sizes M6; 8; 12; 14‘

No 506 1/2'' D 300 mm‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 514M 3/4'' D 1/2'' a‘


‘


‘


No 54TX 1/2'' a sizes T45; T50; T55; T60‘


‘

No 415SGB 1/4'' b‘


‘


‘


‘

No 4630 size 1‘

No 4632 size 3‘

No 4724 size 2 (1.0 x 5.5 x 25 mm)‘

No 4734 size 2‘

No 10760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

96830192 96830193

96830194

96830195

96831196

96830198

96830197

293

10

No 65 01 6 180‘

No 65 43 4 002‘

No 65 45 4 002‘

No 65 46 4 021‘

No 65 51 6 240‘

No 66 02 6 160‘

No 100 150 mm‘

No 103 150 mm‘

No 104 120 x 4; 120 x 6 mm‘

No 105 120 x 12 mm‘

No 108 150 x 4 mm‘

No 10670 265 mm‘

No 10940 O 55 mm‘

No 10955 O 35 mm‘

No 10960 300; 500 g‘

No 11095/20 20 blades 0.05–1 mm‘

No 12005‘

No 12036 260 mm‘

No 12321‘

No 12905‘

No 12931 3 m‘

Tool set for Volkswagen1000 TCS


‘

RCode kg €‘

97830200 1 of each 15.1 1375.65‘


‘

No 13 sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;16; 17; 18; 19; 21; 22; 24 mm

‘

No 20 sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;14 x 15; 16 x 17; 18 x 19; 20 x 22;21 x 23; 24 x 26; 25 x 28; 27 x 32 mm

‘

No 46 3/8'' a size 20.8 mm-13/16''‘

No 422 3/8'' D‘

No 50 1/2'' a sizes 8; 9; 19; 30 mm‘

No 51 1/2'' a size 27 mm‘

No 52 1/2'' a sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30;32 mm

‘

No 54 1/2'' a sizes 12; 17 mm‘

No 1054/8K 1/2'' a 120 mmNo 1054/10 1/2'' a 140 mm

‘

No 2054X/M10 1/2'' a 110 mmNo 3054X/M12 1/2'' a 140 mm

‘

No 509/5 1/2'' D a 130 mm‘

No 509/10 1/2'' D a 255 mm‘

No 509W/2 1/2'' D a 52 mm‘

No 509W/5 1/2'' D a 130 mm‘

No 510 1/2'' D a 71 mm‘

No 512 1/2'' D‘

No 4724 size 2 (1 x 5.5 x 25 mm)‘

No 4734 size 2‘


‘

No 4830 sizes 1; 2; 3‘

No 10767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm‘

No 65 29 6 160‘

No 65 70 6 250‘

No 66 00 6 180‘

No 102 125 mm‘

No 104 120 x 2 mm‘

No 105 100 x 10 mm‘

No 108 115 x 2; 150 x 2.5; 150 x 6;200 x 8 mm

‘

No 1023‘

No 10957 O 35 mm‘

No 10960 500 g‘

No 12717‘

No 12718‘

96830353 96830258

96830351 96830256

96830255 96830257


294

10

Special tools for cars

! Special tools for carburettors

r Screwdriver10503for adjusting slotted screws, matt chrome, black tip.

‘


73210101 365 0.8 x 5.0 x 260 100 10 7.75‘

r Screwdriver10506for setting correct CO-valve onmixture screen, idling mixture onPierburg carburettors:BMW, Ford, Opel, Peugeot, Renault, Mercedes-Benz cars. Chokeadjustment Audi 80, VW Passat 1.3-1.5; 1.6 l, matt chrome, black tip.

‘


73010001 350 0.8 x 4.0 x 300 53 10 10.80‘

i Screwdriver10507N KKfor hexagon socket head screws,size 3 mm, for mixture regulation ondistributor of K-Jetronic: VW-Audi, Mercedes-Benz, Porsche 924, Ford andBMW, matt chrome, black tip.

‘


73101003 385 56 5 11.20‘

r Screwdriver10518for adjustment (slotted screws),matt chrome, black tip.

‘


73210102 525 1.0 x 5.5 x 410 159 10 10.10‘

Jet reamers1108516 pieces in case, with holder.

‘

measuring range RCode mm g S €‘

74310001 0.33–2.0 27 10 35.10‘

Bit holder with inside hexagon12504for all screwdriver bits, flexible shaft,for adjustment.

‘

L inside Blade RCode mm a '' mm g S €‘

18101016 260 1/4 150 168 10 16.30‘

Screwdriver Bit54TX-T20for inside TORX® screws, size T20,1/2'' a-drive, use on mounting screws for choke-switch on choke-flap L-Jetronic.

‘

RCode Type g S €‘

03100020 BMW 71 5 10.60‘

CROW-FOOT spanner540-22size 22 mm, 3/8'' a-drive, on through-flow jet of 2B4-carburettor, for use with adaptor No 513.

‘


02200022 BMW: series 3, 518, 520 64 1 39.30‘

Adaptor5131/2'' socket x 3/8'' plug.

‘


13030002 BMW: series 3, 518, 520 55 5 9.30‘

Socket1062bi-hexagon, AS-drive, size 27 mm,1/2'' a-drive,for diesel injectors.

‘


03830027 BMW: M 21: E30 = 324td, E28 = 524td, E34 = 524td, M 51: E36 = 325td, E34 = 525tds 255 5 43.50

‘

Special ring spanner1023single ended, angled, size 13 mm,use on mounting screwsof injection pump.

‘


41110013 Citroën: all diesel VW/Audi: Audi 80 L, CL, GL, CD, Golf, Jetta, Caddy, Passat 67 1 14.70

‘

Socket51-27extra deep, bi-hexagon, size 27 mm,1/2'' a-drive, for injection nozzles ondiesel car engines.

‘


03020027 Mercedes-Benz 294 5 20.90‘

!

295

10

Socket51-30size 30 mm, for injectors.

‘


03020030 Mercedes-Benz 341 5 21.20‘

Socket3000multi-spline, 1.5 x 58 mm, 1/2'' a-drive, for use on pre-chamber with indirect injection.

‘


03390001 Mercedes-Benz diesel 185 10 40.40‘


‘

RCode g S €‘

13210001 186 1 21.90‘

INHEX socket1054-13for hexagon socket head screws, size 13 mm, length, 70 mm, 1/2'' a-drive, for use on brass air-cooled injector nozzles.

‘


03150713 VW/Audi: for engines with fuel injection 130 5 23.60

‘

? Special tools for valves andpistons

Valve seating-ring pliers11063for pulling valve stem seals and removalof valve spring base on VW-Audiengines with overhead camshaft i.e. Golf,Passat, Audi 80, Audi 100, BMW andMercedes-Benz, bright nickel-plated.

‘


74290001 250 340 1 39.40‘

Valve seating-ring pliers11063/1for extracting poorly accessible valveshaft seals, e.g. in four-valve engines.Joint and jaws made of gun-finishedhardened sheet steel.Handles made of nickel-plated shapedsheet steel.‘


74290002 270 330 1 45.60‘

Valve spring lifters11066bright nickel-plated.

‘

Clamp. width Jaws RCode size mm (2 pieces) g S €‘

74122001 1 75–225 11066R/1 1200 1 67.0074122003 2N 120–280 11066R/3 + R/4 3214 1 128.00‘

Spare jaws11066Rfor No 11066, 2 each, hardened,nickel-plated.

‘

RCode size shape for No g S €‘

79120101 1 straight 11066/1 120 1 13.7079120102 2 bent 11066/1 120 1 13.7079120201 3 straight 11066/2 103 1 13.7079120202 4 bent 11066/2 114 1 13.70‘

Piston ring compressors11068made of spring steel, stepless adjustment c/w hexagonkey wrench.

‘

Clamp. width Height RCode size mm mm g S €‘

74140000 0 40–75 50 105 1 17.5074140001 1 1) 57–125 80 230 1 27.7074140003 2 90–175 80 270 1 37.5074140005 3 90–175 165 603 1 69.50‘

1) Fiat-No A 60 605 (Type 126, 127, 128, X 1/9, 130, 131, 132, 850T, 238)‘

Piston ring pliers11069for mounting and removing pistonrings, bright nickel-plated.

‘

for piston rings L RCode size mm mm g S €‘

74152001 1 1) 50–100 200 245 1 26.2074152002 2 80–120 240 279 1 28.1074152003 3 110–160 240 394 1 31.4074152005 5 2) 60–160 220 194 1 33.10‘

1) Fiat-No A 60 182 (Type 126, 127, 133, 850T)2) with V-shaped contact faces for safe and positive manipulation of pistonrings‘

1–3

5

!?


296

10

Precision feeler gauges11095–11097DIN 2275, DIN EN 10140, nickel-plated case, tapered blades.

‘

L RCode No Sizes mm g S €‘

74240001 11095/13 0.05; 0.10; 0.15; 0.20; 0.25;0.30; 0.40; 0.50; 0.60; 0.70; 0.80; 0.90; 1.00 mm 100 61 10 6.25

74240002 11095/20 0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.35; 0.40; 0.45; 0.50; 0.55; 0.60; 0.65; 0.70; 0.75; 0.80; 0.85; 0.90; 0.95; 1.00 mm 100 95 10 9.60

74240005 11097/26 1 1/2; 2; 2 1/2; 3; 4; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25/1000'' 100 80 10 11.70

‘

Valve spring tool12108incorporating 2 clamping and2 compression facilities which areinterchangeable, suitable for mostcar engines, some without removingcylinder head.

‘

RCode g S €‘

74570001 780 1 85.50‘

Motor mechanics stethoscope12705steel probe, plastic handle andsound tubes.

‘

RCode g S €‘

74060001 137 1 61.00‘

Valve grinding tools12731with suction cap.

‘


74050020 20 58 5 4.5574050025 25 54 5 4.5574050030 30 66 5 4.7074050037 37 65 5 5.20‘

Socket40-3hexagon, size 3 mm, 1/4'' a-drive, for releasing andtightening screws on the expansion valve.

‘


01010003 BMW: X6 model E71, 7 Series model F01/F02 7 10 4.70

‘

Ring insert tool732/10-10size 10 mm, valve adjustment,tightening torque 8–12 N m.

‘


58221010 BMW: all except Diesel 44 1 28.00‘

INHEX socket1054-10for hexagon socket head screws, size 10 mm, length 140 mm,1/2'' a-drive, for cylinder head bolts.

‘


03151410 Mercedes-Benz 150 5 10.80‘

Screwdriver BIT3054X-M10for tri-square socket head screws(XZN), size M10, length 140 mm, 1/2'' a-drive, for cylinder head boltsand drive shaft bolts.

‘


03261410 Mercedes-Benz 142 5 15.50‘

Screwdriver BIT3054X-M12size M 12, for cylinder head bolts,with tri-square socket head M 12.

‘


03261412 Mercedes-Benz 160 5 14.00‘

Screwdriver BIT3004for tri-square socket head screws(XZN), size M12, length 55 mm,1/2'' a-drive, for cylinder head bolts.

‘


03230012 Mercedes-Benz 75 5 21.10‘

Set: Screwdriver sockets54CV/9for spline socket head screws (Ribe CV),for brakes and cylinders head bolts.Content: M5; M6; M7; M8; M9; M10; M12;M13; M14

‘


96030901 Fiat, Alfa 1420 1 127.90‘

?

297

10

Screwdriver sockets54CVfor spline socket head screws (Ribe CV),length 60 mm, 1/2'' a-drive, for brakes and cylinder head bolts.

‘

RCode size Type g S €‘

03090007 M7 Fiat 78 5 12.6003090008 M8 Fiat 78 5 9.9003090009 M9 Fiat (1.2 l; 8V/16V) 92 5 13.8003090010 M10 Fiat (1.2 l; 8V/16V) 95 5 11.101

03090012 M12 Fiat (2.0 l) 119 5 11.6003090013 M13 Fiat, Alfa (e.g. 1.6 l; 16V) 123 5 16.3003090014 M14 Alfa (e. g. 1.6 l; 16V) 126 5 13.6003090016 M16 Alfa (e. g.1.6 l; 16V) 163 5 14.80‘

§ Special tools for chassies andsteering

Socket40TX-E8for external TORX® screws, size E 8, 1/4'' a-drive,for steering lock screws.

‘


01270008 BMW 10 10 5.70‘

OPEN-RING spanner24-17x19bi-hexagon, size 17 x 19 mm, useon wingpump manifold(hydro-steering).

‘


41081719 BMW 151 10 18.10‘

Socket55-36hexagon, size 36 mm, 3/4'' a-drive, use on vibration damper.

‘


05010036 BMW: series 5, 6 and 7, except 518-520i 386 2 17.10

‘

CROW-FOOT spanner540-22size 22 mm, 3/8'' a-drive, use on track-rods.

‘


02200022 BMW: series 3, 518, 520 64 1 39.30‘

Adaptor5131/2'' socket x 3/8'' plug.

‘


13030002 BMW: series 3, 518, 520 55 5 9.30‘

BIT1417for inside TORX® screws, size T25; 1/4'' E-drive,for screws on sun roof E30.

‘


08130025 BMW 6 10 3.00‘

Screwdriver BIT3054X-M10for tri-square socket head screws (XZN), size M10, on drive shaft bolts.

‘


03261410 Mercedes-Benz 142 5 15.50‘

Internal puller11060-3capacity 27–36 mm, for taper roller bearingouter ring on steering housing, to be usedwith counter stay No 11061-2.

‘


71160013 Mercedes-Benz 365 1 54.00‘

Counter stay with reduction unit11061-2for taper roller bearing outer ring onsteering housing.

‘


71170012 Mercedes-Benz 1500 1 66.50‘

Socket46-19Fiat-No A 57 052extra deep, bi-hexagon, size 19 mm, 3/8'' a-drive, for front mounting screw of topsteering link on front wheel suspension.

‘


02020019 Fiat: 1500, 125 112 10 15.30‘

Brass punch12495Ø 20 mm, length 200 mm, for use on bushes bearing rings, steering pivot pin.

‘


77130000 VW/Audi 533 5 19.90‘

?§


298

10

% Special tools for ignition andelectrics

Spark plug socket34663/8'' a-drive, with magnet, outside dia 25.5 mm,for deep seated plugs.

‘

A L RCode mm/'' mm g S €‘

02140036 16-5/8 85 198 5 30.00‘

Spark plug socket46003/8'' a-drive, with rubber insert.

‘


02120036 16-5/8 60 88 10 14.40‘


‘


02130018 18-11/16 65 132 10 14.60‘

Tubular spark plug socket10423/8'' a-drive.

‘


02230016 16-5/8 270 203 5 21.60‘

Tubular spark plug sockets10433/8'' a-drive, extra long, with rubber insert, fordeeply recessed, difficult-to-reach spark-plugswith M12 x 1.25 mm threads.Citroën: C5 with engine 2.0 l HPIPeugeot: 406 HPIRenault: Twingo, Clio, Kangoo with engine 1.2 l, 16V

‘

A L RCode No mm mm g S €‘

02230014 1043 14 90 52 1 15.7002231014 1043/1 14 250 144 1 19.70‘


‘


02020208 20.8-13/16 65 151 10 15.00‘

Spark plug sockets511/2'' a-drive, with rubber insert

‘


03020216 16-5/8 83 137 10 17.8003020208 20.8-13/16 83 194 10 19.80‘

Spark plug socket51S1/2'' a-drive, with rubber insert

‘


03240208 20.8-13/16 83 196 10 21.20‘

Rubber insert5100for size 20.8 mm(No 46; 51; 51S).

‘

RCode g S €‘

09010001 5 5 1.15‘

Spark plug connector pliers10626forged, with 45° offset, curved jaws,for extracting and replacingsparkplug connectors.

‘


76530001 195 223 1 32.30‘

Spark plug brush12375wood, brass wire dia 0.15 mm.

‘


74160001 150 3 x 5 18 10 1.60‘

%

299

10

Tools for heater plugs

Ratchet ring spanner25GKangled, extra long, for hard-to-reachheater plugs (e.g. BMW, Mercedes-Benz, Peugeot, Renault, Seat, VW/Audi), size 8 mm for contact rail bolts,size 12 mm for diesel heater plugs, chrome plated.

‘

A L RCode mm mm g S €‘

41180812 8 x 12 255 156 1 44.80‘

Spark plug sockets3047extra long, for hard-to-reach heaterplugs, 3/8'' a-drive, size 10 mm e.g.for Renault, VW/Audi TDi;size 12 mm e.g. for BMW, Mercedes-Benz (201, 202 four-valvetechnology), Ford, Opel, Renault.

‘

A L RCode mm mm g S €‘

02180010 10 140 138 1 36.8002180012 12 140 138 1 36.80‘

Heater plug socket pliers10627forged, curved jaws with milled grip,for accessing tight-fitting, awkward-to-reach heater plug connectors (e.g. BMW, Mercedes-Benz,Peugeot, Renault, Seat, VW/Audi).

‘


76530004 220 262 1 51.50‘

Socket46-12extra deep, bi-hexagon, size 12 mm, 3/8'' a-drive, use on glow plugs of dieselengines.

‘


02020012 BMW: 324d; 524d 57 10 13.20‘

Testing tools for car electrics

Car circuit tester12905for car electrics 6–12 volt and 24 volt, with pointed probe, cover cap, connecting lead withalligator clip.

‘


77380001 120 73 10 7.40‘

Automotive voltage tester(complete set)

7756

Testing unit for electric and electroniccar components, 3–48 volt, 2 LEDsto indicate voltage and plus or minuspole, complete in Pc-bag.Content:1 basic unit with 1.5 m cable,testing tip, integrated mechanical sliding needle, 1 crocodile terminal, 1 jaw clamp

‘

RCode g S €‘

77560001 85 1 48.80‘

Crocodile terminal7755

‘

RCode g S €‘

77550001 12 1 7.85‘

%


300

10

Tyre leversHandy, sturdy construction,purposefully shaped, Chrome Alloy Steel.

‘

L RCode No mm g S €‘

74010400 39 cars 400 383 5 23.6074010600 39/1 HGVs 600 897 5 35.1074010602 39/2 HGVs 600 1172 5 27.6074010603 39/3 HGVs 600 915 5 23.70‘

e Socket51S

P Qextra deep, DIN 3124/ISO 2725-1, E DIN EN 3710,E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

t2

t1

d 3

‘


03240208 20.8-13/16 1) 27.7 26 20 83 22 66.2 196 10 21.20‘

1) with rubber insert for spark plugs and for tightening and untighteningwheel nuts on Japanese cars‘

c IMPACT sockets23091/2'' a-drive, for power drivers, extra deep, with reduced outside diameter,Chrome Alloy Steel, gunmetal finish.

‘


23090017 17 25.7 30 85 68 242 5 25.9023090019 19 28.2 30 85 67.5 257 5 25.9023090208 20.8 30.7 30 85 66.5 272 5 29.0023090022 22 32 30 85 66.5 311 5 29.00‘

for wheel nuts‘

c Wheel nut sockets2309Kwith plastic sleeve.Sleeve extension protects not onlywheel bolts and nuts but also thewheel and holes.

‘

A a L O RCode mm '' mm mm g S €‘

23091017 17 1/2 87 32 242 1 32.7023091019 19 1/2 87 32 250 1 34.3023091208 20.8 1/2 87 32 265 1 34.00‘

Balance weight pliers10599/2registered design, with cutter forcutting and trimming lead weights(with or without adhesive foil),Chrome Vanadium, chrome plated.

‘


76294003 245 319 1 51.00‘

Wheel bracesDIN 3119/ISO 6788, forged centresection, pressed-in extension armswith extra deep forged socketheads, Chrome Alloy Steel, chromeplated.

‘

A L RCode No mm/'' mm g S €‘

43030006 35c cars 17; 19; 22; D 1/2'' 400 2058 1 90.5043030005 34c HGVs 24; 27; 32; D 3/4'' 700 5053 1 140.00‘

&

& Special tools for brakes andwheels

ES 721/15/3/2

530 x 350 x 40 mm, 6 pieces‘

RCode g €‘

96838172 5012 529.90‘

No 2309K 1/2'' a sizes 17; 19; 20.8 mm-13/16''‘

No 721/15 30–150 N m‘

No 35c cars 17; 19; 22; D 1/2''‘

No 10599/2 245 mm‘

83812087 Empty tray 299 22.30‘

301

10

Brake spring pliers10613for rivetted brake linings/shoes,Chrome Vanadium, bright nickel-plated.

‘


76413001 210 245 6 25.5076413002 330 380 6 32.70‘

Brake spring pliers10613/1with flexible anvil, for rivetted andglued brake linings/shoes.

‘


76413021 330 461 2 56.00‘

Brake spring pliers10613/2*for fitting and removing the retainingsprings on drum-brake pads, e.g. Mercedes-Benz, Type 168, A Class, Renault Clio and Twingofrom August 2002.

‘


76413022 235 221 1 46.50‘


Brake calliper file12371for removing dust, rust and dirt frombrake calliper groove.

‘


74540101 260 104 5 32.50‘

Steel wire brush12373special slim design.

‘


77440001 230 2 70 10 8.45‘

Brake disc gauge12900/2NDIN 862, for measuring thethickness of car and motorcyclebrake discs in situ, stainless steel,with locking screw and trailingvernier scale (1/10 mm), in wooden storage box.

‘

measuring range throat depth RCode mm mm g S €‘

77371003 60 55 233 1 109.00‘

INHEX socket1049-9for hexagon socket head screws, size 9 mm,3/8'' a-drive, for brake calliper retainers.

‘


02151009 BMW, MINI 62 5 8.95‘

INHEX socket54-7for hexagon socket head screws,size 7 mm, 1/2'' a-drive,for changing brake linings.

‘


03050007 BMW: 518, 520i, 525i, 528i 75 5 8.40‘

OPEN-RING insert tool733/10-11size 11 mm, use withSERVICE-MANOSKOP® torque wrenchNo 730/5, for flare nuts on brake lines and bleed screws.

‘


58231011 Mercedes-Benz 55 1 30.30‘

OPEN-RING insert tool733/10-12size 12 mm, for flare nuts on brake pressure regulator,tightening torque 15–18 N m.

‘


58231012 BMW 59 1 30.30‘

OPEN-RING insert tool733/10-14size 14 mm, for flare nuts on main brake cylinder,tightening torque 16–25 N m (BMW), for flare nuts on brake lines andbleed screws (Mercedes-Benz).

‘


58231014 BMW, Mercedes-Benz 60 1 30.30‘

OPEN-RING insert tool733/10-17size 17 mm, for flare nuts on main brake cylinder,tightening torque 16–25 N m.

‘


58231017 BMW 64 1 30.30‘

OPEN-RING insert tool733/10-19size 19 mm, for flare nuts on main brake regulator,tightening torque 30–40 N m.

‘


58231019 BMW 80 1 30.30‘

&


302

10

/ Special tools for lubricationservice

Oil filter claw1015for loosening of oil filters on cars.

‘

a Clamp. width total height length of clawsRCode '' mm mm mm g S €‘

74620002 3/8 68–120 65 50 530 1 82.00‘

Special socket3045for oil filters, size 74 mm, 14-point,10 mm dia. bore and outsidehexagon 22 mm Ø.

‘

total height RCode mm g S €‘

74370001 52 131 1 14.90‘

Special socket3045Kfor oil filters, size 74 mm, 14-point,10 mm dia. bore and outsidehexagon 22 mm Ø, extremelycompact – essential where accessis awkward.

‘

total height RCode mm Type g S €‘

74370003 44 e.g. Ford Mondeo from 02/2002 104 1 14.60

‘

Special sockets3046for fitting and removing oil filtercovers when changing oil filtercartridges.

‘

A a RCode mm '' Type g S €‘

02111032 32 3/8 e.g. Audi, MAN, Vauxhall Astra, Corsa, VW Passat 130 1 16.80

02111036 36 3/8 e.g. BMW, Mercedes-Benz cars, 100 D Transporter, MAN, Vauxhall Vectra B DI 16V, VW Lupo 1.2 TDi, model year 99 171 1 20.10

‘

Strap wrenches12005for oil filters etc.,up to 140 mm diameter.

‘


76500001 12005 450 264 1 24.2079150001 12005/1 1) 450 68 1 9.35‘

1) spare strap‘

Oil filter wrenches12007adjustable for diameters 80–110 mm.Hardened anti-slip cams ensure safety during use.

‘


76521001 12007/1 1) 150 226 1 28.0076521002 12007/2 2) 240 319 1 34.20‘

1) with 1/2'' a2) with lever handle‘

12007/1

12007/2

&/

Screwdriver sockets54CVfor spline socket head screws (Ribe CV),length 60 mm, 1/2'' a-drive, for brakes andcylinder head bolts.

‘

RCode size Type g S €‘

03090007 M7 Fiat 78 5 12.6003090009 M9 Fiat (1.2 l; 8V/16V) 92 5 13.8003090013 M13 Fiat, Alfa (e.g. 1.6 l; 16V) 123 5 16.30‘

Set: Screwdriver sockets54CV/9for spline socket head screws (Ribe CV),for brakes and cylinders head bolts.Content: M5; M6; M7; M8; M9; M10; M12;M13; M14

‘


96030901 Fiat, Alfa 1420 1 127.90‘

303

10

INHEX socket54-14for hexagon socket head screws, size 14 mm,1/2'' a-drive, for use on oil drain plug.

‘


03050014 Mercedes-Benz 135 5 11.40‘

Hexagon key wrench10765-12Fiat-No A 5013long, for hexagon socket headscrews, size 12 mm, for oil drain plugon engine, gearbox and rear axle.

‘


43210012 Fiat 287 5 5.80‘

INHEX socket1054-13for hexagon socket head screws, size 13 mm,length 70 mm, 1/2'' a-drive, for oil drain plug onengine.

‘


03150713 Lancia 130 5 23.60‘

Oil service spanner1058bent, size 8 and 10 mm outsidesquare, for drain plugs on sump,gearbox, differential.

‘


44730810 Peugeot, Renault 314 5 20.30‘

INHEX socket1054KK-5with ball-point hexagon, size 5 mm,length 238 mm, 1/2'' a-drive,for use on socket head screws with difficult access up to an angle of 25°,size 5 mm for use on sump screws of 5 cylinder diesel engine, VW van T4.‘


03310005 VW/Audi 145 5 18.40‘

INHEX socket1054KK-8size 8 mm, length 238 mm.

‘


03310008 VW/Audi 154 5 20.70‘

( Special tools for engine and geartransmission

Clutch alignment tool127358-piece set, contains 1 clutch alignment mandrel,

length 220 mm;1 combined sliding taper/cylindrical

bush, cylindrical bushes from22.2–25.2 mm;

1 sliding cylindrical bush, tapered at both ends, cylinder diameters16– 21 mm;

5 cylindrical bushes, two sizes each,cylinder diameter 12–20 mm, in wooden storage box 55 x 81 x 38 mm.

‘

RCode g S €‘

74480000 650 1 105.00‘

Socket50TX-E10for external TORX® screws, size E10, 1/2'' a-drive, use on mounting screws for GETRAG 260 gearbox, as well as on automatic gearboxes fitted to US andJapanese models.

‘


03270010 BMW 53 10 8.80‘

Socket50TX-E12size E12

‘


03270012 BMW 55 10 8.85‘

Socket50TX-E14size E14

‘


03270014 BMW 56 10 9.15‘

Screwdriver BIT54TX-T27for inside TORX® screws, size T27, 1/2'' a-drive,use on switchgear of automatic gearbox 3HP 22,4HP 22.

‘


03100027 BMW 72 5 10.60‘

BIT1418for inside TORX® screws, size T27, 1/4'' E-drive,use on switchgear on automatic gearbox 3HP22, 4HP 22.

‘


08130027 BMW 6 10 3.00‘

/(


304

10

SERVICE-MANOSKOP®

torque wrench730N/5

10–50 N m, with tool carrier for inserttools, for tighteningZF switch-gear and adjustmentbrake belt BW 65 on automatic gearbox, to use with ratchet insert toolNo 735/10.

‘


50181005 BMW 831 1 242.00‘

Ratchet insert tool735/10reversible, 1/2'' a-drive.

‘

RCode g S €‘

58250010 147 1 64.00‘

Special circlip pliers6547use on retaining ring on gearboxmain shaft (all ''GETRAG'' andZF gearboxes S4-18/3).

‘


65474170 BMW 154 1 28.30‘

INHEX socket3049-8for hexagon socket head screws, size 8 mm,length 24 mm, 3/8'' a-drive, for use on mountingscrews on fluid fly-wheel.

‘


02152408 Mercedes-Benz 28 5 9.55‘

Socket51-27extra deep, bi-hexagon, size 27 mm, 1/2'' a-drive, for rotating engine throughhexagon on crankshaft.

‘


03020027 Mercedes-Benz 294 5 20.90‘

INHEX socket1054-10for hexagon socket head screws,size 10 mm, length 140 mm,1/2'' a-drive for bolts on car engines.

‘


03151410 Mercedes-Benz 150 5 10.80‘

Internal puller11060-1acapacity 16–20 mm, for sealing ring and bearing on crankshaft, use with counter stay No 11061-1.

‘


71160021 Mercedes-Benz 120 1 45.10‘

Counter stay11061-1

‘

RCode g S €‘

71170011 654 1 42.90‘

Internal puller11060-2capacity 20–27 mm, for bearing bush of idler gear on oil pump drive, use with counter stay No 11061-2.

‘


71160012 Mercedes-Benz 131 1 51.00‘

Counter stay11061-2

‘

RCode g S €‘

71170012 1500 1 66.50‘

SERVICE-MANOSKOP®

torque wrench730/2

capacity 4–20 N m.

‘


50180002 VW/Audi 315 1 194.00‘

Square drive insert tool734/53/8'' a-drive, for use with SERVICE-MANOSKOP®

torque wrench No 730/2.

‘


58240005 VW/Audi 76 1 24.50‘

(

305

10

Pin wrench12717offset, distance between pins18 mm, pin dia. O 2.9 mm, length 140 mm, for ring nut oftension pulley on 1.6 l diesel.

‘


44700018 2/80 Golf, Jetta, Passat, Audi 80 75 10 9.95‘

) Special tools miscellaneous

Chain exhaust-pipe cutter157infinitely adjustable, with twisthandle, also suitable for specialsteel pipes up to 1.8 mm wallthickness, chain length 270 mm.

‘

G RCode mm g S €‘

60110001 25–75 705 1 116.00‘

ChainK157‘

RCode g S €‘

69130001 183 1 85.50‘

Special extension1225curved, for use on magnetic switchdiesel pump.

‘

D RCode '' g S €‘

12250001 3/8 128 5 18.60‘

Hose clip pliers10614for self tightening hose clips,nickel-plated.

‘


76460000 220 293 1 28.10‘

Hose clip pliers CLIC10615/1for CLIC hose clips e.g. Alfa Romeo,Audi, BMW, Opel, Peugeot, VW.Work can be carried out at variousangles due to stepless swivellingjaws.

‘


76460013 200 189 1 42.10‘

Hose clip pliers10623/1registered design, with rotating jawsand multiple locking positions,single-handed use even with wideopenings due to variable-geometryjoint, especially for 12 and 15 mmwide, large-format hose clips, e.g. for Alfa Romeo, Audi, Citroën, Fiat, Ford,Mercedes-Benz, Opel, Peugeot, Porsche, Renault, VW.

‘


76460012 290 414 1 64.50‘

Hose clip pliers10623/2registered design, with Bowdencable and multiple locking positions,especially for 12 and 15 mm spring-steel hose clips, suitable for use nearcooling and heating systems up to adiameter of 42 mm, access to hard-to-reach places using Bowden cable remote action (length 610 mm), e.g. for Alfa Romeo, Audi, Citroën, Fiat, Ford, Mercedes-Benz, Opel,Peugeot, Porsche, Renault, VW.

‘


76540001 300 565 1 111.00‘

Replacement Bowden cable for No 10623/2‘

RCode g S €‘

79540001 120 1 33.00‘

Ear clamp pincers10625for application of 1 and 2-ear clampson shaft sleeves, radiator and fuellines e.g. for Audi, BMW, Ford, GM,Honda, Mazda, Mercedes-Benz,Nissan, Opel, VW, quality steel, black paint finish.

‘


76540002 225 340 1 26.40‘

Hose clip pliers10625/2for correctly closing hose clipswithout ears, for shaft sleeves onAudi, Mercedes-Benz, Toyota andVW. Quality steel, nickel-plated, jaws gunmetal finished.

‘


76540003 200 173 1 43.10‘

()


306

10

Thread taps12001-1*M 20 x 1.5; for fast, accurate tappingof aluminium union nuts for air-conditioner cooling hoses for carsand other hydraulic connectors, e.g.for Audi, Opel, VW. Patent, with inner bore for holding hose collar, made ofhigh-grade HSSG M2 steel. 13 mm hex drive for a T-bar or ratchet with a13 mm socket.

‘


72100005 125 164 1 109.00‘


Flat scraper12718special steel, for removal of gasketseals on carburettor, valve cover,cylinder head etc.

‘


72030101 265 160 5 17.50‘

Pull hook for rubber exhaustmountings

12763

with T-bar, chromium-plated, blackdip-coated, for pulling rubber loopson exhaust mountings. All cars except Ford.

‘


74200001 210 100 5 13.20‘

Extractor pliers12771for removing fixing plugs on doortrims, outside trims, rubber bumpercovers etc.Joint and jaws made of hardenedsheet steel, handles made ofshaped sheet steel.

‘


76480001 230 182 1 33.10‘

Fuel hose clamp12975capacity up to Ø 20 mm, for stopping fuel flow temporarily.

‘

RCode g S €‘

74340001 38 10 7.20‘

BIT1435for inside TORX® screws, size T55, 5/16'' E-drive,for screws in rear seats, for use with bit-holderinsert tool No 736/40.

‘


08140055 BMW: X6 model E71, series 7 model F01/F02 20 10 5.70

‘

BIT holder insert tool736/40Internal hex drive 5/16'', for screws in rearseats, for use with bit No 1435.

‘


58261040 BMW: X6 model E71, series 7 model F01/F02 112 1 38.90

‘

BIT1445for inside TORX® tamper resistant screws, size T30, 1/4'' E-drive, use on sensor screwswheelhouse (models with airbag system).

‘


08160030 BMW 6 10 4.30‘

Hexagon nut spinner12506-6flexible, size 6 mm, for screws on hose clips of radiator hose,max. tightening torque 8 N m.

‘


43100206 BMW 167 10 14.60‘

CROW-RING spanner440-17size 17 mm, 3/8'' a-drive, for use on pipes for air conditioning unit.

‘


02190017 Mercedes-Benz 40 1 41.80‘

)

307

10

CROW-RING spanner440-19size 19 mm.

‘

RCode g S €‘

02190019 40 1 41.00‘


‘

RCode g S €‘

02190022 57 1 42.60‘


‘

RCode g S €‘

02190024 57 1 42.60‘

Ratchet insert tool735/20reversible, 1/2'' D-drive, use with SERVICE-MANOSKOP® torquewrench No 730/12 and 730/20, for general service work.

‘


58250020 Mercedes-Benz 302 1 68.00‘

SERVICE-MANOSKOP®

torque wrench730R/5

capacity 6–50 N m, 3/8'' D-drive, for general service work.

‘


96502005 Mercedes-Benz 945 1 271.00‘

SERVICE-MANOSKOP®

torque wrench730R/12

25–130 N m, 1/2'' D-drive

‘


96502012 Mercedes-Benz 1410 1 301.00‘

SERVICE-MANOSKOP®

torque wrench730R/20

40–200 N m, 1/2'' D-drive.

‘


96502020 Mercedes-Benz 1555 1 320.00‘

Internal puller11060-1capacity 12–16 mm, for use on bearings,seals and bushes.

‘


71161011 Mercedes-Benz 110 1 45.10‘

Internal puller11060-2capacity 20–27 mm.

‘


71160012 Mercedes-Benz 131 1 51.00‘


‘


71160013 Mercedes-Benz 365 1 54.00‘


‘


71160015 Mercedes-Benz 385 1 74.50‘


‘


71160016 Mercedes-Benz 558 1 95.00‘

Counter stay11061-1for Internal Puller No 11060/0–2, for use on bearings,seals and bushes.

‘

RCode g S €‘

71170011 654 1 42.90‘

Counter stay11061-2for Internal Puller No 11060/3–7.

‘

RCode g S €‘

71170012 1500 1 66.50‘

)


308

10

Hexagon nut spinner12506-7flexible, size 7 mm, for screws onhose clips of radiator hose, max. tightening torque 8 N m.

‘


43100207 Mercedes-Benz 168 10 14.70‘

Hexagon key wrench10760CV-2,5–17

Fiat No A 89601 up to A 89611 forhexagon socket head screws, size2.5 mm up to 17 mm (see page 208).

Standard-MANOSKOP®

torque wrench720Nf/80

capacity 160–800 N m, 3/4'' a-drive.

‘


50190081 VW: LT Syncro 6102 1 763.00‘

SERVICE-MANOSKOP®

torque wrench730/5

capacity 5–50 N m, for general service work.

‘


50180005 VW/Audi 805 1 209.00‘

Ring insert tool732/10-13size 13 mm, for use withSERVICE-MANOSKOP® torquewrench No 730/5.

‘


58221013 VW/Audi 55 1 28.00‘

Ratchet insert tool735/10reversible, 1/2'' D-drive, for use withSERVICE-MANOSKOP® torque wrench No 730/5.

‘


58250010 VW/Audi 147 1 64.00‘

SERVICE-MANOSKOP®

torque wrench730/20


‘


50180020 VW/Audi 1250 1 252.00‘

Ratchet insert tool735/20reversible, 1/2'' D-drive, for use with SERVICE-MANOSKOP®


‘


58250020 VW/Audi 302 1 68.00‘

SERVICE-MANOSKOP®

torque wrench730/40


‘


50180040 VW/Audi 1880 1 369.00‘

Ratchet insert tool735/40reversible, 3/4'' D-drive, for use with SERVICE-MANOSKOP®


‘


58250040 VW/Audi 510 1 101.00‘

Bit screwdriver socket1421for inside TORX® screws, outside E 1/4'' C 6.3 size T45, length 26 mm, for use on door hinges.Drive Tools:f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820or ratchet reversible No 725/4B and torque wrench.

‘


08130045 VW: Golf III 8 10 3.75‘

)

309

10

Special tools for HGVs

Wheel bracesDIN 3119/ISO 6788, forged centresection, pressed-in extension armswith extra deep forged socketheads, Chrome Alloy Steel, chrome plated.

‘

A L RCode No mm/'' mm g S €‘

43030005 34c HGVs 24; 27; 32; D 3/4'' 700 5053 1 140.0043030006 35c cars 17; 19; 22; D 1/2'' 400 2058 1 90.50‘

Tyre leversHandy, sturdy construction,purposefully shaped, Chrome Alloy Steel.

‘


74010600 39/1 HGVs 600 897 5 35.1074010602 39/2 HGVs 600 1172 5 27.6074010603 39/3 HGVs 600 915 5 23.7074010400 39 cars 400 383 5 23.60‘

Air filter claw1068for loosening of filter cartridges onair brakes (trucks).

‘

a Clamp. width total height length of claws RCode '' mm mm mm g S €‘

74620011 1/2 100–145 85 60 925 1 222.00‘

c IMPACT sockets25093/4'' a-drive, for power drivers, extra deep, with reduced diameter,Chrome Alloy Steel, gunmetal finish.

‘


25090027 27 40.5 44 100 72.5 672 2 47.6025090030 30 44.3 44 100 72.5 728 2 51.5025090032 32 46.8 44 100 72 778 2 55.0025090033 33 48 44 100 72 803 2 56.00‘

for Trilex wheels‘

c IMPACT sockets26091'' a-drive, for power drivers, extra deep, with reduced outside diameter,Chrome Alloy Steel, gunmetal finish.

‘


26090027 27 42.3 54 110 80 1001 2 58.5026090030 30 46 54 110 79.5 1047 2 64.5026090032 32 48.5 54 110 79 1015 2 68.0026090033 33 49.8 54 110 78.5 1102 2 68.00‘

for wheel nuts‘

OPEN-RING spanner24-17x19bi-hexagon, size 17 x 19 mm,for all threaded connectors oninjector pipes.

‘


41081719 Mercedes-Benz 151 10 18.10‘

Socket51-30extra deep, bi-hexagon, size 30 mm, 1/2'' a-drive, on injector post.

‘


03020030 Mercedes-Benz 341 5 21.20‘

CROW-RING spanner440-27MBfor setting of electronic injection on440-HP-engines.

‘


02191027 Mercedes-Benz 92 1 51.50‘


310

10

4-pin socket3678length 72 mm, 1/2'' a-drive, for use on pressure nut of injector post.

‘


03810001 Mercedes-Benz 153 5 35.50‘

INHEX socket1054-10for hexagon socket head screws,size 10 mm, length 140 mm, 1/2'' a-drive, for cylinder head bolts.

‘


03151410 Mercedes-Benz 150 5 10.80‘

Screwdriver BIT3054X-M12for tri-square socket head screws(XZN), size 12, length 140 mm,Ø 11.5 mm, 1/2'' a-drive for cylinderhead bolts with tri-square socket head M 12.

‘


03261412 Mercedes-Benz 160 5 14.00‘

Piston ring compressor11068-2of special spring steel, infinitely variableadjustment, c/w adj. spanner, capacity Ø 90–175 mm.

‘


74140003 Mercedes-Benz 270 1 37.50‘

Socket55-30size 30 mm, hexagon 3/4'' a-drive, for U-bolt nuts, front.

‘


05010030 Mercedes-Benz 313 5 15.70‘

Socket55-36size 36 mm, for U-bolt nuts, rear.

‘


05010036 Mercedes-Benz 386 2 17.10‘

OPEN-RING spanner24-10x12hexagon, size 10 x 12 mm, for general service work.

‘


41081012 Mercedes-Benz 59 10 14.40‘

CROW-RING spanner440-30size 30 mm, 1/2'' a-drive for use onhydraulic pipe flare nuts.

‘


03190030 Mercedes-Benz 155 1 53.50‘

CROW-FOOT spanner540-19size 19 mm, for use on new pushconnector for pneumaticinstallations on new light-weighttruck series.

‘


02200019 Mercedes-Benz 64 1 29.10‘

CROW-FOOT spanner540-24size 24 mm.

‘

RCode g S €‘

02200024 60 1 40.10‘

SERVICE-MANOSKOP®

torque wrench730R/2

capacity 4–20 N m, 3/8'' D-drive, for use on new push connector for pneumatic installations on newlight-weight truck series.

‘


96502002 Mercedes-Benz 455 1 256.00‘

311

10

Torque wrench set730R/40/3232 pieces, in steel case, for generalservice work.Content:1 SERVICE-MANOSKOP®

No 730/40, 80–400 N m,1 ratchet insert tool No 735/20,

reversible, 1/2'' D-drive;1 square drive insert tool

No 734/20, 1/2'' D-drive;7 o/e insert tools No 731/40,

sizes 13, 15, 17, 19, 22, 27, 30 mm1 No 3731/40 size 24 mm;7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm

10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 25, 30,32 mm

4 accessories, 1/2'' a-drive:1 T-handle No 5061 extension 255 mm No 509/101 extension 130 mm No 509/51 extension 55 mm No 509/2

‘


96502053 Mercedes-Benz 9739 1 1235.20‘

Set of INHEX sockets54/12for hexagon socket head screws, insteel case, for general service work.Content:12 INHEX sockets No 54, sizes 4, 5, 6, 7, 8, 10, 12, 14,

17, 19 mm,No 3054/8, No 1054/10,

1/2'' a-drive.

‘


96030503 Mercedes-Benz 2131 1 152.50‘

Standard-MANOSKOP®

torque wrench721Nf/80

capacity 160–800 N m, 3/4'' D-drive,for general service work.

‘


50200081 Mercedes-Benz 7222 1 980.00‘

The STAHLWILLE-KABELEX® range

312

Round plugsystems/crimp-contacts*)

Round plugsystems/solderedcontacts

Flat plugsystems with2 or morelocking tonguesCrimp contacts

Flat plugsystems with 2locking tonguesasymmetricalCrimp contacts

Flat plugsystems with1 locking tongueCrimp contacts

Tools/bushesPrivate cars Lorries Contact size No

mmBMW Mercedes-

BenzFiat Ford Mazda Opel PSA Renault VolvoVW/Audi

Seat/Skoda/Porsche

Mercedes-BenzMAN Scania Volvo

x x x x x x x x x

x x x x x x x x x

x x x x

x x x

x x x x

x x

x

x x

x x x

x

x x

x x x x x x x x

x x x x x x x x

x x x x x x

x x

x

x

x

x

x

x x

x x

x x

x x

x

x

x x x x x x x x x x x x x

x

x x

x

x x x

x x x x x x x x x x x

x x x x

x x x

x x x x x x x x x x x x x x

x

x

x x x x x x x

x

O 1.5

O 3.5

O 4 ABS

O 2.5

O 2.3

O 4

O 1.5 long

O 1.5 long

O 1.5

O 4

O 2.5

2.8

5.8

1.6

9.5

2.8 ducon

1.5 ducon

4.8/6.3 ducon

9.5 ducon

VKRbox contactMKR/MKS-contactsSLK-contacts(primary)SLK-contacts 97(primary + secondary)

LSK-contacts

1.65 E 95

For GSK-flat-fuse contacts(1-, 2- and 3-channelplugs, 2, 4 and6 locking tongues)

2.8/5.8 Junior PowerTimer-contactsStandard PowerTimer-contacts

0.64 MQSasymetrically

2.8

4.8

2.8

2.8/5.8

2.8

5.8

several pid-pod

0.8 ducon

1.5 ducon

1.6 without box

2.8

pincontact

Maxi PowerTimer-contacts

1501 +15111502 +15121503 +1513. 15231504 +15141505 +15151506 +15161507 +15171508 +1518

1575

1584

1585

1551

1552

1556

1559

1565

1566

1567

1568

1577

1577-1

1578K-1

1578K-2

1589K

1587

1588

1591

1556-1

1557

1558

1572

1553

1554

1555

1562

1563

1564

1574

1576

*) The complete tool consists of ejection tool with bush.

TORX®

313

TORX® Screw Sizes, according to DIN

DIN

M 2ST 2.2M 2.5ST 2.9M 3M 3.5ST 3.5ST 3.9M 4ST 4.2ST 4.8M 5ST 5.5M 6ST 6.3M 7M 8M 10M 12M 14M 16M 18M 20M 22CamcarLicencesheet

931/933 912 963/965 964/966 7984 7985 7991 7981 7982 7983

T88 T88 T88

T88 T88 T88

E48 T10 T10 T10 T10 T10 T10

T15 T15 T15

T10 T10 T10

T15 T15 T15

E58 T20 T20 T20 T20 T20 T20

T20 T20 T20

T25 T25 T25

E68 T25 T25 T25 T25 T25 T25

T25 T25 T25

E88 T30 T30 T30 T30 T30 T30

T30 T30 T30

E10 T45 T40 T45 T45 T45 T40

E12 T50 T50 T50 T50 T50 T50

E14 T55 T55

E18 T60 T60

E20 T70 T70

E24 T80 T80

E24 T90 T90

1*T100*

TMF- TMF- TMF- TMF- TMF- TMF- TMF- TMF- TMF- TMF-16001 17012 17065 17066 17069 17085 17091 17081 17082 17083

p C Screwssize mm metr. HH

E4 3.8 M3 2.2–2.9E5 4.7 M4 –E6 5.7 M5 –E7 6.2 M6 –E8 7.5 M6–M7 3.5–4.2E10 9.4 M8 –E11 10.1 – –E12 11.1 M10 –E14 12.9 M12 –E16 14.7 M12 –E18 16.6 M14 –E20 18.4 M16 –E24 22.1 M18–M20 –

p C Screwssize mm metr. HH

T5 1.4 M1.4–M2 –T6 1.6 M2 –T7 2.0 M2.5 2.2T8 2.3 M2.5 –T9 2.5 M3 2.9T10 2.7 M3–M3.5 –T15 3.3 M3.5–M4 3.5T20 3.8 M4–M5 4.2T25 4.4 M4.5–M5 4.8T27 15.0 M4.5–M5–M6 –T30 15.5 M6–M7 –T40 16.6 M7–M8 –T45 17.8 M8–M10 –T50 28.8 M10 –T55 11.2 M12 –T60 13.2 M14 –T70 15.5 M16 –T80 17.6 M18 –T90 19.9 M20 –T100 22.1 M22 –

Screw correlation for TORX® Tools

*Special screw

Index of numbers

314

AB 97N 18BL 150 246BL 153 246BL 1500 246BZ 150/3/4 246BZ 153 246BZ 1500 246ES TX/32 37ES 1/4� + 10760CV 38, 101ES 1/2�– 512/6 38, 132ES 10/10;

5,5x7–22x24 mm 36, 67ES 10/10;

6x7–30x32 mm 36, 67ES 13/5; 27–32 mm 36, 70ES 13/8; 16–24 mm 36, 70ES 13/10; 6–15 mm 36, 69ES 14/8; 16–24 mm 36, 72ES 14/10; 6–15 mm 36, 72ES 20/8;

6x7–19x22 mm 36, 73ES 20/10;

6x7–30x32 mm 37, 73ES 24/7;

8x10–19x22 mm 37, 78ES 25/7;

7x8–17x19 mm 37, 79ES 29/6;

8x9–18x19 mm 37, 80ES 52/17 38, 117ES 54/54KK 38, 120ES 54KK/5 38, 121ES 54X/54TX 39, 123ES 55/6/4 39, 135ES 102/105/108/8 43, 250ES 102/108/109/4 42, 250ES 456/16/6 38, 116ES 721/15/3/2 40, 300ES 1054/2054 39, 121ES 1054/2054TX/6 39, 123ES 2309K/3 39, 145ES 2309/4 39, 144ES 4620/4622/

4632/8 40ES 4620/4628/

4630/7 40ES 4620/4630/8 40ES 4622–4734/9 40ES 4622SK/

4632SK/6 40ES 4650/9 41ES 4656/9 41ES 4660/4665/VDE/6 41ES 4820/4830/6 41ES 4820/4830/8 41ES 4856/9 41ES 6501–6602/7A 42, 233ES 6501–6602/7B 42, 233ES 6543–6546/4 42ES 10670–13110/11 42, 253ES 10750/10;

6x7–20x22 mm 37, 83ES 10751/10;

6x7–20x22 mm 37, 83ES 10768/6 41, 211ES 10769/7 42, 211ES 10769B/7 42, 212ES 10956/10960/2 43, 249ES 10956/10970/2 43, 249ES 12500N/7 41, 207H 11030 266H 11050 264K 157 246, 305KL 158 247MP300 184PB98 18PZ1221–PZ1223 148RI 1500 246RL 150, RL 153 246RL 1500 246R 920 18SCH 60–140 17SCH 60–140KM 17SD 10351N 281SDH 921 18SP 11040 267SP 11041 267SP 11050 267SP 11053 267SP 11055 267SP 12150 267SR 150 246SR 153, SR 155 246SR 290–SR 393 184ST 11 61ST 97 62ST 97 R 62STW 391-700 184STW 392-70 184STW 393-70 184TCS TX/57 MF N 53TCS 1/3 MF 59

TCS 1/4� + 10760CV 49, 101TCS 1/2�–512/6 50, 132TCS 1/2�–512/9 40, 132TCS 10/10;

6x7–24x27 mm 46, 67TCS 10/10;

6x7–24x27 mm MF 46, 67TCS 10/10;

6x7–30x32 mm 46, 67TCS 10/10;

6x7–30x32 mm MF 46, 67TCS 10+13+24/30 46, 67TCS 10a/9 46, 68TCS 12+13+14/29 47, 71TCS 13/17; 6–24 mm 47, 70TCS 13/17;

6–24 mm MF 47, 70TCS 13/18; 6–24 mm 46, 70TCS 13/21; 6–34 mm 47, 70TCS 13/25; 5,5–34 mm47, 70TCS 13a/19 47, 71TCS 13a/23 48, 71TCS 14/5; 17–21 mm 48, 72TCS 14/8; 8–16 mm 48, 72TCS 20/8;

6x7–19x22 mm 48, 74TCS 20/8;

6x7–19x22 mm MF 48, 74TCS 20/10;

6x7–30x32 mm 48, 74TCS 25/7 48, 79TCS 29/7;

8x9–20x22 mm 48, 80TCS 40/35/9 49, 102TCS 40/41/44/8 49, 102TCS 40/45/50/89/19 52TCS 40/456/52/78/19 52TCS 50TX/54TX/17 51, 120TCS 50/51/52/32 51, 118TCS 50/52/30/6 MF 51, 132TCS 50a/17 51, 118TCS 52/17 51, 118TCS 52/18 MF 51, 118TCS 54/2309K/12506 53TCS 54/54X/16 53, 121TCS 55/11/6 53, 135TCS 102–108/11 57, 251TCS 102–108/

10956/10960/18 58, 252TCS 102–108/

10957/10960 MF 57, 251TCS 102–108/

10957/10960/13 58, 252TCS 102–108/

10957/12718/13 57, 251TCS 102–108/

10957/10960/16 58, 252TCS 102–108/

10960/10 57, 251TCS 102–109/

10956/10960/6 57, 251TCS 456/16/4 MF 50, 116TCS 456/16/7 49, 116TCS 456/31/8 50, 116TCS 4620/4630 54, 200TCS 4620/4660VDE 54, 201TCS 4620/4660VDE +

10767 54, 201TCS 4621/4734/16 54, 201TCS 4622/4650 +

10760 + 10766 55, 201TCS 4650 55, 203TCS 4660/4665 55, 204TCS 4724/4840 +

10767 55, 205TCS 4820/4830 55, 205TCS 4856 55, 206TCS 6501–6602/4 56, 234TCS 6501–6602/4N 56, 234TCS 6534–6545/6 57, 234TCS 6543–6564/3 56, 234TCS 6543–6546/4 56, 234TCS 10765/10768/

12507/19 56, 211TCS 10769 +

10771/17 56, 212TCS 12025–13110/11 58, 254TCS 13126/13127/2 59, 259V 12614 266VE 50-150 17010, 012, 023 68013/KH 685, 5.1/2 818 8110, 10a, Sets 66–6812, 12a, Sets 7413, 13a, Sets 68–7114, Sets 71, 7215 7216, Set 7520, 20a, Sets 73, 7420TX 77

21, Sets 7621TX 7723, Set 7624, 24a 78, 29725, 25aN, Sets 7925aSP 7925B 79, 15125GK 29926a 8027 8029, 29a, Sets 8035c Pkw 300, 30934c Lkw 300, 30939 Pkw, Lkw 300, 30940D, 40aD 8840, 40a, 40DL, 40aDL 88, 8940-3 29640aD/10CL 8840aDL/7 8940aDL/10CL 8940aDV, 40L 89, 9040aSP, 40aLSP 9140aD/8/1H 9640CL 9240, 40a, Sets 97–10240TX 9040TX-E8 29740/7N–40/9N 138, 13940/9K 13841K 9144, 44a 9144K 9144KTX, 44KTXB, 44P 9244PZ 9245, 45a 10345, 45a, Sets 112–11545aP 10545aPSP 10545aSP 10545CL 10945TX, Set 10545/1K 13845/1N 13846, 46a 104, 298, 29946aSP 10547, 47a 104, 10547TX 10549, 49a 10649TX, Set 10649X 10650, 50a 11750, 50a, Sets 128–13150aPSP 12050aPLSP 12050CL 12450IMP 14450TX, Sets 119, 30350/1N–50/6N 138, 13950/4K 13951, 51a 118, 294, 295, 298,

304, 309 51aP 12051S 119, 298, 30051IMP 14451/8 11952 11752 Sets 127–12953 11954, 54a 120, 301, 30354/8/4 12854/10 12054/12 31154IC 12154KK 12154CV, 54CV/9, 54X 122,

296, 297, 30254TX 123, 29454TX/9, 54TX/10 12354TXB 12454TXB/9 12454TXB/10 12455, 55a 133, 29755, 55a, Sets 13555IMP 14655/6, 55/7 13956 13356IMP 14659, 59X 13359TX 13460 13660/1, 60/2 13960 Sets 13760IMP 14761 8264 13666IMP 14770V 18370VK 18371 172, 17373Nm/15 17382/013 1983/09 19

83/010 1986TX 100, 13187aN 13187N 13088TX 9989N 11389TX 100, 114, 13192KM G 1794N 1694N/KM 1696/3 1797H/8 1597H/KM 15, 1697N 14, 1597N/KM 14, 15100 249101, 102 249102 Sets 250103 249104 250104-5/6D 250105 250105-8/6K 251108 250108/6D, 108/6Pc 251109 250110 249112, 112/1 249130a 75130aSP 75150 246153 246155 246157 246, 305158 247165N 247180a 75220, 220a 77220aSP 77230a 75240, Sets 78400, 400QR 93400 Drall 94401 94402, 402a 90402a Set 90402aK 90402aSP 91403 94404, 404QR 94405 94405QR 94405W 94406 94407, 407QR 95409 95409M 95, 194409M/432M/514M/3 95, 111,

127410 95411 92412 95, 152412-1 95, 153413 94414H 96415 92415B 93, 151415QR 92415QRL 93415SG-QR 93415SGB 93, 151415SGH 96415SK 93416 93417/1 95421 110422 109424, 425, 425QR 110427 110427QR 111427W 111428 111428QR 111431 111432, 432M 111, 112433/1 111434 111435, 435QR 109435SG-QR 109440, 440a 107440S MJ 107442 112, 152443 112, 152445 110446/08 19447, 447a 109447aSP 109450 110452 110453 110456 103460a 103

501 126501B 1265021/2 183504 126506 126506QR 126509 126509IMP 145509QR 126509W 126510 127510IMP 145510QR 127512, 512G, 512SG-QR 125512QR 125513 127, 294, 297513IMP 145514, 514M 127514IMP 145515 125517 125522 125532, 532G 125540, 540a 108540aHD 108543 127, 152552 134554 134556 134558 134559 134560IMP 146561 134561IMP 146563 134568 134568IMP 146569 134569IMP 146712R/6 171713R 171720Nf 168721 168721Nf 169725/4 177725B 177725L/5 177725QR 177730 167, 304730D, 730DR 164730N, 730NR 166, 304730R/40/32 182, 311731, 731a 178, 179732, 732a 179, 180, 296732/80 180732G 180732TX 180733, 733a 180, 181, 301734 178734/80 178734F 178734K 195734L/5 178735 177736 153, 181737 181755 170760 175775 174775/30N/2 154801N 22802N 23803N 23804N 24806/9 TCS 45, 283806/10 34, 282808/9 35811N 25841N 26859 137859IMP 147866 137866IMP 147867IMP 147871IMP 147876N 130876TX 130882–888 136900, 900/6Pc, Set 254904 255905/25, 906 254910 20912 18913 18913/1 18913/2 18913/3 18920 11920 C 11920 C-SCH 11922N 111000 TCS 293

No Page No Page No Page No Page No Page

315

1015 3021023 2941042 2981043, 1043/1 2981049 106, 3011054 1211054-10 296, 304, 3101054-13 295, 3031054KK 1221054KKTX 1241054TX 1231054TX/4Pc 1241054X 1221058 3031062 2941068 3091100 TCS 2921110 TCS 2841157–1169 1481180–1186 1481200/1 1511201 1501204/8 1491204/21-1 1501204/21-2 1501218–1223 1481225 111, 3051231–1234 1481242–1250 1531260–1262 1531270–1272 1531280–1284 1531290–1296 1531299 149, 1691300–1304 1491350–1360 1481407–1421 1481417 2971418 3031427 1481430–1435 1481435 3061440–1446 1491445 3061474/2 2811501–1508 2741510 2721511–1518 2741520 2721523 2741550 2721551–1555 2741556–1559 2741560 2731562 2741564–1568 2751570/1, 1570/2 2731572 2751574–1587 2751588–1589K 2761590 2731591 2761650N, 1650K 2471651 2471652N 2471655N, 1656N 2471700 2731720 2731820, 1821 1822049 1062054 1212054X 1222054TX 1232307TX 1452308TX 1452309 144, 3002309K 144, 3002500TCS 2852501N TCS 2872509 146, 3092609 147, 3092801 1533000 2953004 2963022N/1TCS 2903026N/1TCS 2883027 253045 3023045K 3023046 3023047 2993049-8 106, 3043049X 1063054 1213054X 1223054X-M10 296, 2973054X-M12 296, 3103054X/54X/8 1223115–3116 151, 1523216 1523316/1 1523466 104, 298

3505 127, 2953678 3103825/1 1524000 1504004 824006/1 1504007 1514008 96, 1514008/27/1 96, 1514025, 4026 824030–4036 1544040–4045 1544050–4058 1544060 1544110 934150 934150QR 93, 1834204 824205a 814350 1104350QR 110, 1834600 104, 2984606 104, 2984620 2024621 2024622 2024622SK 2024628 2024630 2024631 2024632 2024632SK 2034636 2034640 2034650 2034650L 2034656 2044660 VDE 2044665 VDE 2044670 VDE 2044691 2004692 2004693 2004694 2004695 VDE 2044696 2004697 2004699 2004724 2024734 2034744 2034751 2064752 2064753 2064797 2064798 2074820 2054830 2054840 2064856 2064891 2054892 2054899 2055040 1265091IMP 1455092IMP 1455100 104, 119, 2985120+7210/15 125, 1825120QR 125, 1835520 1345591IMP 1465592IMP 1466091IMP 1476092IMP 1476501 216, 2386507 216, 2386508 216, 2386509 2166510 2176511 2176512 2176513 2176514 2176516 2176517 2356518 2186519 2186523 218, 2386524 218, 2386525 2186526 2356529 219, 2396530 219, 2396531 2196532 2196533 220, 2396534 2206535 2206536 2206537 2216538 2206540 235

6543 2216544 2216545 2226546 2226547 222, 3046549 2246551 2236554 2236555 2246556 2246557 2246558 2246559 2256561 2256562 2256562/1, 6562/2 2256563 2266564 2266565 2266566 2266567 2266568 2276571 2276572 2236573 2236575 2276576 2276600 228, 2396601 2286602 228, 2406603 2356604 2366605 2356606 2366607 2366608 2296612 2296613 2366614 2376615 2376617 2296618 2296619 2366620 2376621 2376622 230, 2406623 230, 2406624 2306630 230, 2406634 2316637 2316638 2316639 2316640 2316641 2326660 2326661 2326662 2326670–6674 2416676, 6677 2416702 2336703 2336704 2336705 2336706 2336966 2327210 1827250QR 183 7301, 7302 1707350 110, 126, 183 7370 181, 1827380N, 7385N 1827395-1 1657706PC 1897707 W 1927721–7724 1937750 1947750-1 1917751 1947752 1947753 1947755 2997756 2997759-1 1727759-3 1657759-4 1947760 1947787 1957788 1957789 127, 1957790 1917791 1907791-1 1907791-2 1917792 1917792-1 1917794 186, 1878002 208003S 598004S 618015–8016 608017 61

8022N 618023-2 598023-3 598023-4 618023L 598024 608024-1 608025–8027 608029 608031–8041 218042 608043, 8043/1 598044–8046 618050 218144 208820 13610350N 28010351N 28010351/1 28110351/2 28110351/3 28110352 28010352/1 28110354, 10355 28110356 28110356R 28110503 29410506 29410507N KK 204, 29410518 29410546 20710551 20710554 20710599/2 30010613, 10613/1 30110613/2 30110614 30510615/1 30510623/1, 10623/2 30510625 30510625/2 30510626 29810627 29910642, 10643 27910670, 10672 25210676 25210750, Sets 8310750 1/2 8310751 8310757 21210759, 10759a 9610760CV 20810760aCV 20810760CV, 10760aCV

Sets 20810761 21010765, Set 20910766, Sets 20910767, 10767a, Sets 21010767H, Set 21010768 21110768–2K 21110769 21110769B 21210771, Set 20910775–10795 27610800–10842 27710845–10890 27810895, 10900 27810905–10908 27910915, 10916 27910917 27910921 27910922 27910923 27910925 27810940 24810955, 10955R 24810956 24810956R 24810957, 10957R 24810958 24810960 24810970 24910980 27610998 27611005, 11006 27911007 27911030 26611040 26511041 26711042 26511050 26411051, 11053, 11054 26411055 26511056 26411060, 11061 265, 266,

297, 304, 30711062 26611063, 11063/1 29511066 29511066R 295

11068 29511069 29511085 29411095–11097 29612000 25412001-1 30612005, 12007 30212025 25312030 25312035 25312036 25312050 25312053 25312108 29612150, 12152 26512200 25312250, 12251 25612320, 12321 25612322 25612371 30112373 30112374 25612375 29812377 25612378 25612481 25612495 29712500N 20712503 15012504 150, 29412506 207, 306, 30812507–2K 20712600 25712613, 12614 26612615 25512616 26712623 26712665 25412705 29612717 30512718 281, 30612727–12730 28012731 29612735 30312749, 12749R 28112752 27912753 27912763 30612769 28012770 28012771 30612800 25512900N 25512900/1N 25512900/2N 255, 30112905 29912910 25712915 25512920N, 12920NR 25712921N, 12921NR 25712922E 25712923 25712931 25512932 25612935N 25512941N 25812941R/4 25812943N 25812943R 25812965, 12965R 25812966, 12966R 25812975 30613006, 13007 15413008 14913010 14913100 25513110 25513115 25613120N 25713120R 25713120-1 25713126 25813127 25813130, 13131 25913135 25913200a 2613205a 2713207a 2713208a 2813209 2213210 2813211a 2913213a 2913214 3013214a 3113214aWW 3213216 2013220 11183812021–83812089 36–43

No Page No Page No Page No Page No Page

Alphabetical Index

316

Article Page Article Page Article Page Article Page

A

D

Accessories– 1/4HH Y 92–96– 3/8HH Y 109–112– 1/2HH Y 125–127– 3/4HH Y 134– 1HH Y 136, 137

Adaptors 95, 109, 111, 112, 127, 134, 137, 145–147,

152, 154, 181, 182, 294Additional tray 18Air filter claw 309Alignment tool 280Angle module 165Anvil dolly 277, 278Automotive voltage tester 299

B

Balance weight pliers 300Ball joint separators 267Ball point hexagon driver 204, 210Bar handle 134, 136Battery terminal pullers 265Bearing scraper 252BIT box 150BIT holder insert tool 153, 181BIT ratchet 93, 151BITS for

– 5-star screws 149– inside hexagon screws 149, 153,

154, 169– Phillips screws 148, 153, 154– Pozidriv/Supadriv screws 148, 153– slotted screws 148, 153, 154– TORQ-SET screws 149– TORX® screws 148, 149, 153– tri-square socket head screws 148– TRI-WING screws 149

BITS holders 95, 112, 127, 150–153BITS screwdrivers 148, 149, 153Blank end insert tool 181Body files 279Body spoons 278Box spanners 83Boxes, empty 138, 139Bradawl 212Brake caliper brush 301Brake caliper file 301Brake disc gauge 255, 301Brake spring pliers 301Brass punch 297Brass wire brush 256Bumping spoons 278

E

Ear clamp pincers 305Ejection tools KABELEX 272–276Electricians cable knife 256, 258Electricians screwdrivers 202, 204Electronics flat nose pliers 235Electronics oblique cutters 236, 237Electronics screwdrivers 206Electronics side cutters 235, 236Electronics snipe nose pliers 235Electronics top cutters 237Embossing hammer 248Empty inlays 43Empty tray for small components 18Engineers files 253Engineers hammers 248, 249Engineers scrapers 252Engineers scriber 256EXPRESS pipe cutters 246Extensions 94, 110, 111, 126, 134,

137, 145–147, 266, 295Extensions with wobble-drive 94,

111, 126Extensions, flexible 94, 111Extractor pliers 306

H

Hacksaw and blades 253Hacksaw frame 253Hammers 248, 249, 276, 277Hand vice 253Heater plug socket pliers 299Heavy duty pipe wrenches 224Heavy duty ring spanners 81Heavy duty side cutters 228, 240Heavy duty steel fixers pincers 232Heavy duty top cutters 229Hexagon key wrenches 208–211,

303, 308Hexagon nut spinners 207, 306, 308

– with T-handle 207Hi-Lok-Tools 96Holding device (for spanners) 21Hooks 21, 60, 61Hook spanner, adjustable 257Hose clip pliers 305

I

IMPACT accessories 145–147IMPACT driver/set 154IMPACT sockets

– 1/2HH Y 144, 145– 3/4HH Y 146– 1HH Y 147

INHEX sockets 91, 106,120–122, 133, 136, 295, 301

INHEX sockets for Ribe CV 122Inlays, empty 43Insert tools for

MANOSKOP torque wrenches 177–182Insert tools for TORSIOMETER/

TORSIOMAX 151–154Internal pullers 265, 297, 304, 307

L

Lever action side cutters 229Lever action top cutters 229Lever bar 279, 280Light unit 257Locking adaptor 95, 111Lubrication service tools 302, 303

M

Magazine case 11Magazine drawer 11Magnetic lifters 257Main tester 207Mains adaptor 194MANOSKOP torque wrenches 164–173Manutork 190, 191Mechanics flat nose pliers 217Mechanics gripping pliers 218Mechanics oblique cutter 229Mechanics round nose pliers 218Mechanics

snipe nose pliers 219, 220, 239METAL pipe cutters 246Micrometers 255Mini-electronic side cutter 236Mini-waterpump pliers 224Multifunctional back panel 18MULTIPOWER-torque multiplier 184Multi-purpose worktop 18

N

Needle files 255Needle pliers 220, 221Non-slip mat GRIPMAT 20Nut spinners 207Nut splitters 255Nylon hammers 248

J

Jack cable 194Jet reamers 294

F

FastRatch ratchet wrenches 78Feeler gauges 296File blades 279File brush 256Files 253, 279Finger protector(-chisels) 249Flange tool 278Flaring cones 247Flaring spindle 247Flat engineers scraper 252Flat (gasket) scraper 281, 306Flat nose pliers 216, 217, 238Flexible drive handle 94Flexible extensions 94, 111Flexible handles 94, 110, 126Flexible heads 134, 136Flexible ratchets 93, 110, 125Flexi-joint spanners 80Friction gauge 173Fuel hose clamp 306

C

Cabinet 20Cable extractor tools KABELEX 272–276Cable knife 256, 258Cable shear 230, 240Calibrating square drive

insert tools 195Calibrating square drive units 183Calibrating systems 186, 189Calibration software 194Carburettor screwdriver 202Carburettor tools 202, 294, 295Car circuit tester 299Centre punches 250Chain pipe cutter 246, 305Circlip pliers, inside and

outside 221, 222, 304Clamping blocks 247Clamping screw 247Claw lifter 257Clip strips 92, 109, 124Clutch alignment tool 303Cold chisels 249, 250Combination pliers 216, 238Combination spanners 68–72, 75Connecting pins (for sockets) 145–147Connector pliers 227Container 21

G

Gauges 182, 254, 255, 296, 301Grinding tools 296GRIPMAT 20Gripping pliers 218, 227Grooving chisels 249Guide handle 281

K

KABELEX ejection tools 272–276Key wrenches 208–211

Oblique cutters 229, 237O/E insert tools

(for torque wrenches) 180, 181O/E striking spanners 82Offset screwdrivers 96, 207Oil cans 256Oil filter claw 302Oil filter wrenches 302Oil service spanner 302, 303OPEN RING insert tools 180, 181OPEN RING spanners 78

O

Padlock 256Panel beating tools 276–280PC-cases, empty,

for torque wrenches 170PC-wallets, empty 68Pecking hammers 276, 277perfectControl calibrating unit 187Perforated panel 20Personal box 18Phillips BITS 148, 153, 154Phillips screwdrivers 202–206Pincers 232Pin punches 250, 251Pin wrench 305Pipe cutters 246, 305Pipe cutter wheels 246Pipe wrenches 224, 225Planishing hammers 276, 277Plastic faced hammers 248Plastic lever bar 280Plastic pipe shears 247Plastic side cutters 241Pliers 216–241PowerGRIP pliers wrench 223Pozidriv/Supadriv BITS 148, 153Pozidriv/Supadriv

screwdrivers 203, 204, 206Precision feeler gauges 296Pry bar 279Pullers 264–267Pull hook 306Punch pliers 279

P

D/E flexi joint spanners 80D/E open ended spanners 66–68, 74D/E ring spanners 73–78, 80Dinging hammer 276Display light unit 59Display stand for pliers 61Display stand for sockets

1/4HH, 3/8HH, 1/2HH sq. dr. 62Display tray 59Display units 59–61Dividers 61Dollies 277, 278Double flaring tool 247DRALL screwdrivers 200–207Draw handle 281Drawer separator 17Drawers 17Drift pins 250Drive handle 93, 94

CONVERTA-modular system 10, 11Corner display unit 61Counter stays for puller 266, 304, 307Cover 18, 61Crimping pliers 231, 232Crocodile terminal 299Cross cut chisels 249CROW-FOOT spanners 108, 310CROW-RING spanners 107, 306,

307, 309Cutter 258Cutting wheels 246

317

UNIFLEX-sockets 90, 91, 104, 105,119, 299

Universal joints 95, 111, 127, 134, 145–147

Universal knife 258USB adaptor 165, 172, 194

U

Valve adjustment tools 295, 296VDE insulated pliers 238–240VDE insulated screwdrivers 204VERITRAC windscreen removal set 280VERITRAC wind. replacement set 280Vernier calliper 255Voltage tester 207

V

Wallets, empty 68Warding files 255Waterpump pliers 223, 224Wheel braces 300, 309Wheel hub puller 266Wheel nut sockets 145, 300Wheely box 11Windscreen removal set,

VERITRAC 280Windscreen replacement set,

VERITRAC 280Wire brushes 256, 301Wire cutter 259Wire insert awl 281Wire insert probe 281Wire stripping knife 258Wire stripping pliers 230, 240Wire twisting pliers 227Work benches, mobile 17Workshop sets 22–26, 282–293Workshop torque tester

SENSOTORK 192

W

Ratchet adaptor 110, 125, 134Ratchet ring spanners 79, 80, 299Ratchet spares 93, 110, 125,

134, 136, 182, 183Ratchet tap holders 255Ratchet wrenches 78, 79, 151Ratcheting bit holder 79, 96, 151Ratchets 92, 93, 96, 109,

110, 125, 134, 136, 151RATCHFIX ratchets 110Recoil-less hammers 248Relay pliers 217Replacement milling cutter 280Ring insert tools for

torque wrenches 179–181Ring spanners

– deep offset 73, 74– open 78– shallow offset 75, 76– straight 76– TORX® 77

Round nose pliers 218, 235, 238Rubber composition hammer 248Rubber inserts (for sockets) 104,

119, 298Rubber rings (for sockets) 145–147Rubbish bin 18

R

Quick-change BIT holder 152QuickRelease drive handle 93QuickRelease extensions 94, 111, 126QuickRelease ratchet insert tool 177QuickRelease ratchets 92, 93, 109, 125QuickRelease sliding T-handle 94,

110, 126QuickRelease

universal joint 94, 111, 127

Q

S

Sales dispenser– for pliers 61– for sockets 1/4HH, 3/8HH, 1/2HH 62

Scrapers 252, 256, 281Screw extractors 254Screw pitch gauge 254Screwdrivers 200–212, 294Screwdriver sockets 91, 92, 106,

122–124, 133, 134Scriber 256Self-grip wrenches 225–227Sensotork 171, 172, 192Separating fixture 266Service MANOSKOP torque

wrenches 166, 167

SERVOMAT socketdispenser 1/4–1/2HH Y 62

Set-off pliers 279Set of reversible screwdrivers 207Set of wheels 18Shell tools for

MANOSKOP torque wrenches 177–180Side cutters 228, 229,

235, 236, 239–241Single-end spanners, adjustable 82Single O/E spanners 82Slide hammers 266Sliding heads 134, 136Sliding T-handles 94, 110, 126Small bore pipe cutter 246Snipe nose pliers 219–221, 239Sockets

– 1/4HH Y 88–91– 3/8HH Y 103–105– 1/2HH Y 117–120– 3/4HH Y 133– 1HH Y 136– multi-spline 295– spline-drive 91, 105, 120– 4 pin 310

Socket sets– 1/4HH Y 97–101– 3/8HH Y 112–115– 1/2HH Y 127–131– 3/4HH Y 135– 1HH Y 137

SoftGRIP 72Software for calibration 194Soldering gun 258Soldering iron 258Soldering wedges, wood 278Spacing washers 246Spare cutting wire 281Spare parts for pipe cutters 246Spare parts for ratchets 93, 110, 125,

134, 136, 182, 183Spare plastic heads (for hammers) 248Spare nylon heads 248Spark plug brush 298Spark plug connector pliers 298Spark plug sockets 104, 298, 299Special extensions 111, 127, 295Special socket 154Special tools for brakes

and wheels 300–302Special tools for carburettors 294, 295Special tools

for cars and trucks 272–311Special tools for chassies 297Special tools for engine

and gear transmission 303–305Special tools for HGVs 309–311Special tools for ignition and

electrics 298, 299Special tools for lubrication

service 302, 303Special tools for pistons 295, 296Special tools miscellaneous 305–308Speeder braces 94, 110, 126Spinner handles 150Spinner with BITS magazine 150Spiral cable 194Spline drive combination spanners 75Spline drive ratchet ring spanners 79Spot weld drills 280

T

Tape measure 255Telescopic mirrors 257Tension strap with ratchet 281Testing tools for car electrics 299Thread restorers 254Thread taps 306Three square bearing scraper 252Three square scraper 252Tin snips 279Tommy bars 83Tool boxes 16, 19Tool cabinet 20Tool cases 22Tool displays 59–61Tool holder 182Tool magazines 11Tool sets 22–59, 282–293Tool trolleys 14–16Tools for heater plugs 299Top cutters 229, 237Torches 258TORQ-Set screwdriver 203Torque angle gauges 182Torque screwdrivers 174, 175Torque test equipment 187–194Torque wrenches 164–173TORSIOMAX torque screwdriver 174TORSIOMETER torque screwdriver 175TORX®-bits 148, 149, 153TORX®-insert tools 180TORX®-screwdrivers 200, 203–206,

211, 212TORX®-sockets 90, 92, 105, 106,

119, 123, 124Transducer 193Trays, empty 138, 139Tubular handles 81Tubular hacksaw 253Tweezers 259Tyre levers 300, 309

Article Page Article Page Article Page Article Page

Spot weld milling cutter 280Spray can and paper holder 18Spring clip 21Square drive adaptor 194, 195Square lug 21Standard partitions

for SERVOMAT 62Standard-MANOSKOP

torque wrenches 168, 169Steel fixers pincers 232Steel rule 255Stethoscope 296Stillson pipe wrenches 225Strap wrenches 302Striking face O/E spanners 82Striking face ring spanners 81Striking sockets 82Stud remover 254, 255Suction lifter 280, 281Swedish pattern wrenches 224

318

3.22 3.28 3.2 1.6 1.6 1.63.23 3.353.52 3.60 3.54.01 4.144.02 4.12 4 2224.52 4.62 4.54.83 4.955.02 5.12 5 2.5 2.5 2.55.21 5.335.52 5.62 5.5 3335.59 5.726.00 6.136.03 6.15 6 3.56.40 6.536.82 6.977.03 7.15 7 4 5 4 47.19 7.327.62 7.778.03 8.188.03 8.15 8 5 6 5 5 5 6 5 58.41 8.568.81 8.979.03 9.15 9 (5)\K9.60 9.75

10.04 10.19 10 6 8 6 6 6 8 6 610.39 10.5511.04 11.19 11 77711.18 11.3311.99 12.1412.04 12.24 12 812.80 12.9513.04 13.24 13 8 10 8 8 8 10 8 813.60 13.7714.05 14.27 14 10 (8)\K14.38 14.5515.05 15.27 15 0101012115.18 15.3615.98 16.1516.05 16.27 16 10 SP:M10+M14 10 12 1216.77 16.9517.05 17.30 17 10 12 (10) (12)17.58 17.7518.05 18.30 18 12 SP:M12 14 12 12 16 14 1219.06 19.36 19 12 14 (12) (16)19.18 19.3819.97 20.1720.06 20.36 2020.78 20.9820.86 21.16 20.8 SP:M14+M18

21.06 21.36 21 14 12 16 14 14 12 16 1422.06 22.36 22 14 16 (14) 1222.35 22.5623.06 23.36 2323.98 24.2124.06 24.36 24 16 14 16 16 18 16 20 1624.76 24.9925.06 25.36 2525.55 25.7826.08 26.48 26 SP:M18

27.08 27.48 27 18 16 20 18 20 18 16 2027.13 27.3628.08 28.48 2828.75 29.0129.08 29.48 2930.08 30.48 30 20 18 20 20 22 20 24 2030.34 30.5931.93 32.1832.08 32.48 32 22 24 (22) 2033.08 33.48 3333.53 33.8134.08 34.48 34 0222022235.10 35.60 3535.13 35.4136.10 36.60 36 24 22 24 27 24 22 30

1/8 No1,2+3

2.5 5/32 No 0+1

2.32.6

3/16 No 2+3 No 3,4+5 No 10

3 313/64

7/3215/64

3.5 3 3.51/4 No 4 No 6+8 [

17/644+4.5 3.5 4

9/32 No10*

19/645/16 No 5+6 No 10+12 fiß!&

5 4 521/6411/32 No 8

5.5 53/8 No 10 [* [ #ß(

6 613/32

6 7 [

7/16 [ [ No12+[ [ \ß!&

15/327 8

1/2 fiß!& [ fiß!& fiß!& |

[ fiß!&

17/328 8

9/16 #ß( fiß!& fiß!& fiß!& #ß( #ß( ·ß!&

10 fiß!& #ß(

19/325/8 #ß( #ß( \ß!& fiß(

921/32

10 1011/16 \ß!& #ß(

12 #ß( \ß!&

113/4 | \ß!& \ß!& | }

25/32

13/16 | ·ß!&

12 14 \ß!& |

12+147/8 ·ß!& | | \ß(

14 |

15/16 fiß( ·ß!& fiß(

16 fiß(

31/32

1 fiß( 116

16 181 1/16 fiß( fiß(

fiß( }

1 1/8 } } } 1@ß(

1820

1 3/161 1/4 } } 1[

20 18+20 22} \ß(

1 5/16 \ß( \ß( \ß(

2422

1 3/8 1#ß(

22+24

NE

F27

-111

-193

0˜)

American sizesThread Diameters

American Standard ANSI

Nuts Bolts and Screws

norm

al

squa

re

heav

y

norm

al

heav

y

mac

hine

scre

ws

squa

re h

ead

set

scre

ws

mac

hine

sc

rew

nut

s

a b c d e f g h

SP: M10+M14

SP: M12

SP: M14+M18

SP: M18

Spanner openingSW

Metric sizesThread Diameters

nom

inal

siz

e of

wre

nch

mm

nom

inal

siz

e of

wre

nch

stan

dard

hex

agon

larg

e he

xago

n

scre

w w

ith f

lang

e

nut

with

fla

nge

norm

al h

exag

on

smal

l hex

agon

norm

al h

exag

on2 )

larg

e he

xago

n3 )

smal

l hex

agon

4 )

scre

w w

ith f

lang

e5 )

nut

with

fla

nge6 )

NFE

27-

111-

1930

8 )

met

ric, l

arge

8 )S

MS

141

2

met

ric, s

mal

l8 )S

MS

141

4

Whi

twor

th, l

arge

8 )S

MS

141

3

Whi

twor

th, s

mal

l8 )S

MS

141

5

DIN ISO272

German standardDIN

Swedishstandard

Frenchstand.

ISOR 2721968

min

imum

dim

ensi

on m

m1 )

max

imum

dim

ensi

on m

m1 )

319

36.73 37.01 1 7/16 \ß( \ß(37.10 37.60 37 \ß( 1HH38.10 38.60 38 2438.30 38.61 1 1/2 1HH 1HH 1HH 1|39.89 40.20 1 9/1641.10 41.60 41 7242720372427241.50 41.81 1 5/8 1HH 1HH42.10 42.60 42 172 HH 1@ß(42.67 42.9343.08 43.38 1 11/16 1@ß( 1@ß( 1@ß(44.70 45.03 1 3/446.10 46.60 46 30 27 30 33 30 27 36 30 3046.28 46.61 1 13/16 1@ß( 1@ß(47.10 47.60 47 1@ß( 1[47.88 48.21 1 7/8 1[ 1[ 1[50.10 50.60 50 33 30 33 36 33 30 33 3351.08 51.44 2HH 1[ 1[52.10 52.60 52 1[ 1#ß(52.68 53.04 2 1/16 1#ß( 1#ß( 1#ß(54.12 54.72 54 3654.25 54.61 2 1/855.12 55.72 55 6324639363336355.88 56.26 2 3/16 1#ß( 1#ß(56.12 56.72 56 1#ß( 1|57.45 57.84 2 1/4 1| 1| 1|58.12 58.72 58 3960.12 60.72 60 1936393936393 | 1fiß(60.66 61.06 2 3/8 1| 1|62.23 62.64 2 7/1663.12 63.72 63 4263.83 64.24 2 1/265.12 65.72 65 1248424249324 fiß( 1}65.43 65.86 2 9/16 1fiß(67.03 67.46 2 5/8 1}67.12 67.72 67 4570.12 70.72 70 154545454 } 1\ß(70.26 70.69 2 3/4 1} 1}71.12 71.72 71 4871.81 72.26 2 13/1675.03 75.51 2 15/16 1\ß(75.15 75.85 75 18465848484 \ß( 2HH76.61 77.09 3HH 2HH77.15 77.85 77 5279.81 80.31 3 1/8 2HH 2HH80.15 80.85 80 225252525 HH82.15 82.85 82 5685.15 85.85 85 56 56 5686.18 86.72 3 3/8 2[88.15 88.85 88 6089.36 89.92 3 1/2 2[ 2[90.15 90.85 90 60 60 6094.15 94.85 94 6495.15 95.85 95 64 64 6495.76 96.34 3 3/4 2|98.93 99.52 3 7/8 2| 2|

100.15 100.85 100 86868686105.20 106.00 105 27272727105.33 105.97 4 1/8 2}108.51 109.14 4 1/4 2} 2}110.20 111.00 110 67676767114.91 115.57 4 1/2 3HH115.20 116.00 115 80 80 80116.20 117.00 116 80118.08 118.77 4 5/8 3HH 3HH120.20 121.00 120 85 85 85

AS

ME

/AN

SIB

18.2

.2–

1987

AN

SIB

18.2

.1–

1981

k k

NFE

27-1

11-1

930˜)

Spanner openingSW

Metric sizesThread Diameters

American sizesThread Diameters

American Standard ANSI

Nuts Bolts and Screws

nom

inal

siz

e of

wre

nch

mm

nom

inal

siz

e of

wre

nch

stan

dard

hex

agon

larg

e he

xago

n

scre

w w

ith f

lang

e

nut

with

fla

nge

stan

dard

hex

agon

smal

l hex

agon

stan

dard

hex

agon

2 )

larg

e he

xago

n3 )

smal

l hex

agon

4 )

scre

w w

ith f

lang

e5 )

nut

with

fla

nge6 )

NFE

27-

111-

1930

8 )

met

ric, l

arge

8 )S

MS

141

2

met

ric, s

mal

l8 )S

MS

141

4

Whi

twor

th, l

arge

8 )S

MS

141

3

Whi

twor

th, s

mal

l8 )S

MS

141

5

norm

al

DIN ISO272

German standardDIN

Swedishstandard

Frenchstand.

ISOR 2721968

1) maximum and minimum dimensions for metric sizes according toDIN 475/2 series 1 and ISO 691 (machined tolerances),American sizes according to ANSI B 18.2.1 + ASME/ANSI B 18.2.2

2) DIN ISO 4014, 4016, 4017, 4018, 4032, 4034, 4035, 4036, 8673, 8674, 8675,8676, 8765, sizes in brackets only DIN 439, 555, 558, 601, 609, 610, 917, 931, 933, 934, 935, 936, 937, 960, 961, 979, 980, 985, 986, 1587, 2510/5, 6330, 6331, 7967, 7968, 7990

3) DIN 6914, 6915, 7999 (SW 21 + 34)4) DIN 561, 5645) DIN 6921, 69226) DIN 6923, 6926, 69277) Standards prior to 19638) old standards

SP = Spark Plug

a) Hex Flat and Hex Flat Jam NutsHex Nuts and Hex Jam Nuts Hex Slotted Nuts Hex Thick NutsHex Thick Slotted NutsHex Castle Nuts

b) Square Nuts

c) Heavy Square NutsHeavy Hex Flat NutsHeavy Hex Flat Jam NutsHeavy Hex NutsHeavy Hex Jam NutsHeavy Hex Slotted Nuts

d) ANSI B 18.6.3 – 1972

e) Square BoltsHex BoltsHex Cap Screws Lag Screws

f) Heavy Hex BoltsHeavy Hex Structural BoltsHeavy Hex Screws

g) ANSI B 18.6.3 – 1972 (R 1983)

h) ANSI B 18.6.2 – 1972 (R 1983)

* Square Bolt and Lag Screws only

min

imum

dim

ensi

on m

m1 )

max

imum

dim

ensi

on m

m1 )

a

norm

al

e

squa

re

b

heav

y

c

heav

y

f

mac

hine

sc

rew

nut

s

d

mac

hine

scre

ws

g

squa

re h

ead

set

scre

ws

h

AS

ME

/AN

SI B

18.

2.2–

1987

AN

SI B

18.

2.1–

1981

320

m

n

o

pY

q

r

s

t

O

P

Q

W

X

R

S

L

M

N

T

U

Symbols used throughout this catalogue Pictogram

A

B

C

D

a

b

E

F

G

J

K

H

I

c

d

e

f

g

h

i

j

k

l

Spanner Opening

Spanner Opening forHexagon Socket Head Screws

TORX® size in mm

Outside Square

Inside Square

Inside Hexagon

Outside Hexagon

Pipe Diameter, inside

Pipe Diameter, outside

Size of Insert Tool Carrierin mm (MANOSKOP®)(Inside Square)

Size of Shell Tool Carrierin mm (MANOSKOP®)(Outside Square)

Open Ring Spanner,hexagon

Open Ring Spanner,bi-hexagon

Socket, hexagon

Socket, bi-hexagon

Socket, hexagon,AS-drive

Socket, bi-hexagon,AS-drive

Socket, bi-square

Socket, spline-drive

for Socket Head Screw, hexagon

for Socket Head Screw, hexagonwith guide pin

for Phillips-Recessed head Screws

Phillips-Recess®,registered trademark ofPhillips Screw Company

for POZIDRIV/SUPADRIV® Screws

POZIDRIV/SUPADRIV®

registered trademark ofEuropean Industrial Services Ltd.

for Trisquare Socket Head Screws

for Inside TORX® Screws

for Inside TORX® Screwswith hollow drive tip

for 5-star screws

for Outside TORX® Screws

registered trademark ofFa. Acument Intellectual Properties, LLC,Rockford, Illinois, USASTAHLWILLE holds the Manu-facturing Licence for TORX® Tools

for Spline Socket Head Screws

Ribe-CV®

registered trademark ofRichard Bergner GmbH & Co.

for Slotted Head Screws

for TRI-WING® Screwsregistered trademark ofPhillips Screw Company

for TORQ-SET® Screwsregistered trademark ofPhillips Screw Company

Diameter in mm

Anti-Slip-drive

High-Performance-Quality

Scale Range

Scale Division

Weight

Standard Pack (pieces)

full flush cutting

semi flush cutting

standard bevel

Safety insulated as per IEC 900 –AC 1000 V

= new items

Special Toolsfor

Carburettor,Fuel InjectionSystems

Valves, Pistons

Chassies, Steering

Car Bodies

Ignition, Electric,Electronic

Brakes, Wheels

Lubrication Service

Engine, Drive train

Other Tools

Eduard Wille GmbH & Co. KGLindenallee 27P.O. Box 12 01 0342331 WuppertalGermany

Tel.: +49 202 4791-0Fax: +49 202 [email protected]

WEEE-Reg.-Nr. DE 70431151

We reserve the right to alter dimensional details inorder to carry out improvements.

All photographs used in this catalogue represent the tools as closely as possible to their natural appearance. Model changes may take place withoutprior notice as in the case of design improvements.

We observe all legal requirements relating to toolsand safety.

All rights reserved.E & OE

Printed in Germany – Copyright by Eduard Wille GmbH & Co. KG, Wuppertal

Programme 2012

Pro

gra

mm

e 2

012

ww

w.s

tah

lwille

.de

EDUARD WILLE GmbH & Co.KG

P.O.Box 12 01 03

42331 Wuppertal

Germany

Tel.: +49 202 4791-0

Fax: +49 202 4791-355

[email protected]

www.stahlwille.de

En Programme 2012

Documents