NON FIBERED ASPHALT EMULSION NON FIBERED ASPHALT EMULSION Certified To Meet ASTM D1227 Standards Surface Coating For Elastomeric Coatings Can be Used With Polyester Fabric Use On Pipes & Tanks Above & Below Ground Will Not Run, Sag Or Crack Corrosion Resistant Solvent Free & Ready-To-Use FLORIDA 1904 SW 31ST AVE HALLANDALE, FL 33009 800.432.2855 CALIFORNIA 14435 MACAW STREET LA MIRADA, CA 90638 877.827.2622 TEXAS 1225 BRAI DRIVE PORT ARTHUR, TX 77640 866.727.0091 FLORIDA 1904 SW 31ST AVE HALLANDALE, FL 33009 800.432.2855 CALIFORNIA 14435 MACAW STREET LA MIRADA, CA 90638 877.827.2622 TEXAS 1225 BRAI DRIVE PORT ARTHUR, TX 77640 866.727.0091 GO TROPICAL! Emulsified Asphalt Coating - ASTM D1227 Emulsified Asphalt Coating - ASTM D1227
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NON FIBERED ASPHALT EMULSIONNON FIBERED ASPHALT EMULSION
NON FIBERED ASPHALT EMULSIONNON FIBERED ASPHALT EMULSION
IDEAL ON IDEAL FOR USE AS A SURFACE COATING FOR BUILT-UP ROOFING, METAL, AND MASONRY SURFACES.
ALL WEATHER MODIFIED MASTICCOPYRIGHT 2012 TROPICAL ROOFING PRODUCTS
MAXIMUM V.O.C 0 G/LBOILING POINT 212°FWATER SOLUABLE FLASH POINT (T.C.C.) NONE SERVICE TEMPERATURE 55°F - 120°F VAPOR DENSITY HEAVIER THAN AIR
H.M.I .S RATING
HEALTH
FLAMMABILITY
REACTIVITY
PROTECTIVE EQPT
1
0
0
NA
Tropical Roofing Products’ #360 Non Fibered Emulsion is a versatile, solvent free, all purpose coating ideal for use as a sur-face coating for built-up roofing, metal, and masonry surfaces, and for pipes and tanks above or below ground level. #360 is made from asphalt emulsified with bentonite clay and water. #360 is cold-applied, corrosion-resistant, and waterproof when dry, while also resisting most corrosive fumes and spray. #360 will not run, sag, crack, or “alligator” under the harshest of weather conditions.
APPLICATION TO OLSHeavy Duty Sprayer, Heavy Duty Paint Roller, Brush