-
Quick Release mooring Hooks
Document No.: #E0601 Rev .: B
2006 Shanghai Eminent Enterprise Development Co., Ltd The
copyright for the information and displays contained within this
document is retained by Shanghai Eminent Enterprise Development
Co., Ltd and is therefore to be considered proprietary. It is
intended for the sole and discreet use of the party for whom it was
prepared. With the exception of published technical references,
literature and brochures the information and displays shall not be
disclosed to a third Party without the prior written consent of
Shanghai Eminent Enterprise Development Co., Ltd Shanghai Eminent
Enterprise Development Co.,Ltd Tel: +86 (0)13905134168
Fax: +86 (21) 5794 1569 Shanghai Email: [email protected]
China Web: www.china-eminent.com
-
Quick Release Hook
Quick Release Mooring Hook
1. GENERAL DESCRIPTIONInstalled at dock, Quick release hooks
arespecial equipments for winding and tying ofships. They are the
update products ofmooring dolphins. Compared with cleat, theyreduce
working intensity, increase workingefficiency and improve safety
and reliability.
Quick release hook consists of integratedelectrical winch and
release systems. Theyare suitable for large tonnage ships
mooringharbors that require fewer workers and quickreleasing and
winding of the hawser underheavy storm or other dangerous
status.
Eminent is a professional manufactory for design,production,
installation and service of QuickRelease Hook(QRH). We learned
about differentdesign philosophies from various manufacturersdrawed
on the pick of the basket and we have put
-
Quick Release Hook
the client's valuable comments into the basket together with our
own experience.Eminent Quick Release Hook as an excellent product
came out to the world. Especially,our designers with a solid
experience continue to update in new material and newtechnical
process in evey year. We have own 38pc patents only for Quick
ReleaseHooks.We can supply you various type QRH(single, double,
triple or quadruple hooks asrequired by the layout of the terminal,
although otherconfigurations, e.g. back-to-back,)with local manual
hookrelease, electric, hydraulic and pneumatic remote
releasesystems for the hooks, with the activation devices
completelyintegrated into the hook assembly. And also can supplyyou
the all type QRH installed mooring load monitoringsystem. We named
it "Eminent Intelligent Hook".We can produce custom-made quick
release hooks base on your requirement.
-
Quick Release Hook
Each hook is proof tested to 150% of its rated load, and the
release mechanismis tested at full load rating at our own test
facility and is witnessedby a surveyor from an independent
Classification Society LRDNVBVABS
etc.. If remote release is incorporated the
hooks can be released from a remote
location (generally the control room or jetty
office) as well as by activating a button on
the control panel mounted on the side of
the hook. Local displays of the mooring load tensions and
audible and visual alarms
can also be incorporated into the hook.
2. STANDARDSOCMIF Mooring Equipment GuidelinesTMXW1-2004 QRH
(Shanghai Enterprise Standard)
ASME, Section IXWelding Qualifications
ASTM A283 (Grade C) Standard Specification for Low
andIntermediate Tensile Strength Carbon Steel Plates
ASTM A148 Standard Specification for Steel Castings, High
Strength for NonStructural Purposes
ASTM A572 Standard Specification for High Strength Low Alloy
Columbium-Vanadium Structural Steel
IEC: National Electrical Code, Intrinsically Safe Process
Control Equipment forUse in Class I Hazardous Locations
International Electrotechnical Commission
Chinese Standards and the specification from the clients.
-
Quick Release Hook
3. Capstan Assembly
In order to save time and to ensure maximum safety,Each mooring
unit is equipped withan integrated electric capstan motor assembly,
the mooring ropes are lifted up to themooring hooks by using the
integrated electrical capstan. The capstan which isreversible is
operated from a foot switch.Capstans are integrally mounted to the
hook units andare certified for Ex area where applicable.This
capstan complies with following specifications:Starting pull: 40KN
= max line pullRunning pull: 15KN-30KN = normal line pullLine
speed: 20 m/min-25m/minBack-stop: 1.5 times normal line pullThe
capstan gear box is a self locking device to prevent the capstan
head from turning inthe opposite direction due to the weight of the
mooring line at power off.The mounting model for motor is
suggested: Horizontal.
4. STRUCTURE DESIGN
MATERIAL LIST:PART STANDARD REMARK
Hook GB-ZG35CrMo Equal to JIS SCCrM3
Shaft GB-40Cr Equal to ASTM A29 5140
Connector GB-Q420A Equal to ASTM A572 Gr.65
Frame GB-Q420A Equal to ASTM A572 Gr.65
-
Quick Release Hook
Mounting base GB-Q420A Equal to ASTM A572 Gr.65
Anchor bolts/nuts GB-Q345A Equal to ASTM A572 Gr.50
We also can choose the right material and cumstom-made QRH base
on
the actual temperature on site(-20)We will submit the
certificates for all material from an independent
Classification Society LRDNVBVABS etc.).If necessary.
SPECIFICATION AND PERFORMANCE DATAEach hook will be tested as
follows: Test load =1.5 times the SWL
Release load = 1.0SWL
Manual release force for release bar < 170N@SWL
The movement range of hooks:
Vertical: -15(MLMS model), -5,0 to 45, 55.
Horizontal:
Single hook unit: 90/90
Double hook unit: 90/45 (left hook)
45/-90 (right hook)
Triple hook unit: 90/ 45 (left hook)
45/ -45(Middle hook)
-45/-90 (right hook)
Quadruple hook unit: Same as Triple hook unit.
MOUNTING BASE METHODS Concrete embedment
-
Quick Release Hook
Bolted to steel deck Welded onto steel deck
HOOK ARRANGEMENTDifferent arrangements availableHooks can be
installed on both sides of postHook post delivered with or without
capstansFree standing capstans
5. INTELLIGENT HOOK
Eminent Intelligent hook includes Remote Release System, Status
Sensors and Mooring
Load Moritoring System. It is possible to performe Quick Release
hooks release,
monitoring out of the dock in emergency. Ensure the Security of
Jettyand operators.
Remote Release System and Status Sensors
To operate the release system from the remote location,a central
remote control
panel is included in the delivery. The panel includes: Hook
release indicator Hook release push button A master release push
button An emergency release push button
A power on/off indicator lamp
A power on/off switch
-
Quick Release Hook
Digital display Display of hook loads Alarm indication
Hook status (locked/unlocked) Failed releaseThe remote quick
release panel RQRP is
connected via the LAN/Ethernet cabling to
the hook stations. Functionality of the hooksis controlled from
the network dedicated
processor LAN Micro Sensor (LMS) built into
the RQRP. Control of the hooks
open/close functions is separated from the central computer
system due to safety
reasons. Furthermore a special coded message protocol between
the RQRP and
the hook station LAN/Ethernet unit is made to avoid accidental
release of the
hooks.The design of the RQRP allows to have multiple RQRPs
connected both forhazardous and safe area.
Mooring Load Monitoring System.
(1) The Load Pin:
The load pin is manufactured as a direct replacement for the
hook swivel shafts.
The load pin shall have the same safe
working load as the corresponding mooring
hook.
The load pins are made of stainless steel
17-4PH, which is a special quality of
stainless steel with an extreme high strength.
-
Quick Release Hook
(2) The Amplifier and Control Uint
A dedicated amplifier module LM4 that is integreted into the
control panel for capstanhas been designed to protect the load
cells fromthe cable network to aviod damage in case of
induction caused by lightening. The amplifier moduleis equipped
with a proceesor unit that will track of
the loads. This means that the load values arememorized in this
amplifier module keeping track
of about 1year of data. Should the central computer
for some reason fail, the history is always available in the
amplifier unit.Temperature
ranging from -40 to 85
(3) Load Monitoring on Central Computor
The load information is in real-time sent to the central
computor for visualization.This central computor acts as server for
the datarecorders located in the hook remote release control
panel cabinet.The central computor system will also host the
Vessel Docking Aid System Software. Displayscreens will be
available to the operator thought astandard MS windows interface
and will form an
intergreted package.
-
The Quick Release Hook REV
B.pdfERH-1.pdfERH-2.pdfERH-3.pdfERH-4.pdfERH(W1).pdfERH(W2).pdfERH(W3).pdfERH(W4).pdf
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/DownsampleGrayImages true /GrayImageDownsampleType /Bicubic
/GrayImageResolution 300 /GrayImageDepth -1
/GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/DownsampleMonoImages true /MonoImageDownsampleType /Bicubic
/MonoImageResolution 1200 /MonoImageDepth -1
/MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true
/MonoImageFilter /CCITTFaxEncode /MonoImageDict >
/AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false
/PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true
/PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [
0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile ()
/PDFXOutputCondition () /PDFXRegistryName (http://www.color.org)
/PDFXTrapped /Unknown
/Description >>> setdistillerparams>
setpagedevice
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/DownsampleGrayImages true /GrayImageDownsampleType /Bicubic
/GrayImageResolution 300 /GrayImageDepth -1
/GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/DownsampleMonoImages true /MonoImageDownsampleType /Bicubic
/MonoImageResolution 1200 /MonoImageDepth -1
/MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true
/MonoImageFilter /CCITTFaxEncode /MonoImageDict >
/AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false
/PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true
/PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [
0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile ()
/PDFXOutputCondition () /PDFXRegistryName (http://www.color.org)
/PDFXTrapped /Unknown
/Description >>> setdistillerparams>
setpagedevice
/ColorImageDict > /JPEG2000ColorACSImageDict >
/JPEG2000ColorImageDict > /AntiAliasGrayImages false
/DownsampleGrayImages true /GrayImageDownsampleType /Bicubic
/GrayImageResolution 300 /GrayImageDepth -1
/GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true
/GrayImageFilter /DCTEncode /AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict >
/GrayImageDict > /JPEG2000GrayACSImageDict >
/JPEG2000GrayImageDict > /AntiAliasMonoImages false
/DownsampleMonoImages true /MonoImageDownsampleType /Bicubic
/MonoImageResolution 1200 /MonoImageDepth -1
/MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true
/MonoImageFilter /CCITTFaxEncode /MonoImageDict >
/AllowPSXObjects false /PDFX1aCheck false /PDFX3Check false
/PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true
/PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ]
/PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [
0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile ()
/PDFXOutputCondition () /PDFXRegistryName (http://www.color.org)
/PDFXTrapped /Unknown
/Description >>> setdistillerparams>
setpagedevice