InstaRack ™ LAN Logistics & Accessories
2
InstaRack™ logistic data ........................................................................................................... 3
InstaRack™ LAN + Accessories EAN codes ................................................................................ 4
Accessories ............................................................................................................................... 6
1
2
3
3
InstaRack™ logistic data
InstaRack™ LAN Rack Type Gross Dimensions (height x width x depth – incl. palette)
Gross Weight
4 x type 1 racks on 1 palette 2260 x 2270 x 900 550 kg
4 x type 2 racks on 1 palette 2260 x 2270 x 900 600 kg
4 x type 3 racks on 1 palette 2260 x 2270 x 900 600 kg
4 x type 4 racks on 1 palette 2260 x 2270 x 900 650 kg
InstaRack LAN Racks single carton without palette (all 4x rack types)
Gross Dimensions (height x width x depth – without palette)
Gross Weight
Typ 1 530 x 2230 x 860 132 kg
Typ 2 530 x 2230 x 860 137 kg
Typ 3 530 x 2230 x 860 137 kg
Typ 4 530 x 2230 x 860 145 kg
1
4
EAN Code Part-No. Description
011500041006 InstaRack LAN Flat Pack
800x2000x800 WxHxD
011500041007 InstaRack LAN Flat Pack
800x2000x1000 WxHxD
011500041011 InstaRack LAN Flat Pack
800x2200x800 WxHxD
011500041012 InstaRack LAN Flat Pack
800x2200x1000 WxHxD
011501041006 InstaRack LAN assembled
800x2000x800 WxHxD
011501041007 InstaRack LAN assembled
800x2000x1000 WxHxD
011501041011 InstaRack LAN assembled
800x2200x800 WxHxD
011501041012 InstaRack LAN assembled
800x2200x1000 WxHxD
InstaRack™ LAN + Accessories EAN codes
EAN Code Part-No. Description
011500179001 Earthing set
for InstaRack
011500201001 Cable Routing Board,
1U
011500211001 Fiper Optic Cable
Routing Board, 1U
011500221001 Cover for Cable
Routing Board
011500231001 Cable Tray
011500231002 Cable Tray
011500241001 19" Cable tray
011500259001 Square Jumpering
Bracket
2
5
EAN Code Part-No. Description
011500270001 Cable Cantilever
011500280001 Hook-IN chassis runner
useful depth 544,5 mm
011500280002 Hook-IN chassis runner
useful depth 644,5 mm
011500280003 Hook-IN chassis runner
useful depth 744,5 mm
011500451001 Fan Unit Thermostat
3 Fans
011500461001 Fan Unit Speed
Controlled SP
3 Fans
011500471001 Fan Unit Speed
Controlled HP
3 Fans
011500320004 InstaRack Bottom Cover
closed for useful depth
544,5
EAN Code Part-No. Description
011500320005 InstaRack Bottom Cover
closed for useful depth
644,5
011500320006 InstaRack Bottom Cover
closed for useful depth
744,5
011500401005 InstaRack Plinth Stationary,
Height 100 mm B 800,
T 800
011500401006 InstaRack Plinth Stationary,
Height 100 mm B 800,
T 1000
011500299001 Brush strip L 436 mm
011500299002 Brush strip L 636 mm
6
Accessories3
Part-No. Image Description ECAT Long Description
011500179001 Earthing set for InstaRack – For Earthing Top Cover/ Side Panel and doors
– With central earthing bolt
Supply schedule: earthlines
washes
screews
earthing bolt
Supplied as: Set of 20 units
011500201001 Cable Routing Board,
1U
– For orderly cable routing
– For safe and secure cable routing of copper
and fiberglass cables
Supply shedule: 19" Front panel
cable routers
Material/finish: Front panel, sheet steel 1,5 mm,
powder-coated, RAL7035 light grey
Supplied as: Preassembled
Set of 20 units
011500211001 Fiper Optic Cable
Routing Board, 1U
– For orderly cable routing
– For safe and secure cable routing of fiberglass cables
– Optionally with cover panels to Protect the cables and
as labling option
Supply schedule: cable routing board
Material/finish: Sheet steel, 1,5 mm, powder-coated
texture, RAL7035 light grey
Supplied as: Set of 10 units
011500221001 Cover for Cable
Routing Board
– Cover for Cable Routing Board
Supply schedule: Cover
Finish: Powder-coated, RAL7035 light grey
Supplied as: Set of 10 units
7
Part-No. Image Description ECAT Long Description
011500231001
011500231002
Cable Tray for InstaRack – For orderly cable management in the InstaRack
– Cable fixing possible using Velco strips or cable ties
Supply schedule: cable tray
mounting material
Material/finish: Sheet steel 1,5 mm, zinc passivated,
powder-coated
Supplied as: Set of 10 units
011500241001 19" Cable tray – For orderly cable management in front ot the 192 front
– Cable fixing possible using Velco strips or cable ties
– Mounting on front panels possible
Supply schedule: cable tray
Material/finish: Sheet steel 1,5 mm, powder-coated
texture, RAL7035 light grey
Supplied as: Set of 10 units
011500259001 Square Jumpering Bracket – For orderly cable management
– Open version, not threading
– Mounting on the external side of the 19" extrusion
– Any installation position selectable
– For large cable volumes
Supply schedule: 4 square jumpering bracket
mounting material
Finish: Zinc-passivated
Supplied as: Set of 20 units
011500270001 Cable Cantilever – For easy mounting in rack/on the shelf;
quick conecting to and disconnecting from shelf
or rack with a spring clip
– Guarantees defined and kink-free cable management
– Minimum space requirement behind the pushed-in
shelves, 40 mm
Supply schedule: cable cantilever girder
mounting material
Material/finish: Sheet steel 1,5 mm, zinc-passivated
Supplied as: Set o 10 units
H W Model Order no. UP
2000 150 For InstaRack 011500231001 Set of 10 Units
2200 150 For InstaRack 011500231002 Set of 10 Units
Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length
8
Part-No. Image Description ECAT Long Description
011500280001
011500280002
011500280003
Hook-IN chassis runner
useful depth 544,5 mm
– For installation in 19" Rack and enclosure
– Hang-ON for quick and easy mounting
– Can also be screwed for heavier load rating
– Can be screwed from inside( use in rack suites)
– Height setting possible for various main section height
Supply schedule: slot-in rails
mounting material
Material/finish: Sheet steel 2,0 mm, zinc passivated,
blue chrome-plated
Supplied as: Set of 10 pairs
CoolBlast® Fan Unit
for Roof Installation
Thermostat-controlled
– For forced rack cooling
– Suitable for installation at any time in the InstaRack top
– 115 VAC versions on request
– Fan function (ON/OFF) thermostatcontrolled,
setting from 0° to +60° C
Material: Housing: Sheet steel, high-grade
steel grid
Finish: Zinc-passivated
Approvals: CE Symbol in acc. with Low Voltage
Directive, 73/23/EEC, EMC directive
89/366/EEC
Supply schedule: 1 CoolBlast fan unit®,1 mains cable,
3 m with safety plug (230 VAC),
Mounting material, Operating
instructions
How supplied: Assembled, wired and tested
Supplied as: Set of 4 units
Note: Please also order specific mains cable
d L For Rack type Order no. UP
544,5 515,5 For InstaRack 011500280001 Set of 10 pairs
644,5 615,5 For InstaRack 011500280002 Set of 10 pairs
744,5 715,5 For InstaRack 011500280003 Set of 10 pairs
Name Model Elec.connection P(W) V(m³/h) ΔP(Pa) p(dB(A)) Order no. UP
CoolBlast® 230V 3-piece Thermostatet 207….253 VAC; 50/60 Hz 45 495 74 45,2 011500451001 Set of 4 Units
Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length
9
Part-No. Image Description ECAT Long Description
CoolBlast® Fan Unit
for Roof Installation
Speed-controlled
– For forced rack cooling
– Suitable for installation at any time in the InstaRack top
– DC version on request (see CoolBlast® fan units)
– Settable reference temperature (20° to 55°C)
– Speed control, 30 to 100%, with sensor break 100 %
rotation
– Individual fan monitoring
– Floating common alarm output for excess
temperature alarm and fan failure
– Optical status display for O.K., excess temperature
and fan failure
– Acoustic warning incl. reset button
Material: Housing: Sheet steel, high-grade
steel grid
Finish: Zinc-passivated front panel,
powder-coated, smooth in RAL 7035
light gray
Approvals: CE Symbol in acc. with Low Voltage
Directive, 73/23/EEC, EMC directive
89/366/EEC
Supply schedule: 1 CoolBlast fan unit®, 1 sensor cable,
2 m (plug-in), 1 signal cable, 2 m
(plug-in), 1 mains cable, 3 m with
safety plug (230 VAC), Mounting
material, Operating instructions
How supplied: Assembled, wired and tested
Supplied as: Set of 4 units
Note: Please also order specific mains cable
Name Model Elec.connection P(W) V(m³/h) ΔP(Pa) p(dB(A)) Order no. UP
CoolBlast® 230V 3-piece controlled SP 100….253 VAC; 50/60 Hz 25 553 68 49,6 011500461001 Set of 4 Units
CoolBlast® 230V 3-piece controlled HP 100….253 VAC; 50/60 Hz 32 711 173 55,8 011500471001 Set of 4 Units
Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length
10
Part-No. Image Description ECAT Long Description
011500320004
011500320005
011500320006
InstaRack Bottom
Cover closed
– For covering the rack underside
– For width 800 mm
Supply schedule: bottom cover
Mounting material
Material/finish: Sheet steel 1,0 mm, zinc-passivated
Supplied as: Set of 4 units
011500401005
011500401006
InstaRack Plinth Stationary,
Height 100 mm
– Stationary
– Cable entry possible from all sides
– Panels front and rear with vent slots
Supply schedule: 4 plinth corners
2 plinth panels with slots
2 plinth panels closed on the side
mounting material
Material/finish: Sheet steel, Powder-coated texture,
RAL 7035
Load rating: 4000 N static
Supplied as: Set of 4 units
W d Model Order no. UP
600 544,5 For InstaRack 011500320001 Set of 4 Units
600 644,5 For InstaRack 011500320002 Set of 4 Units
600 744,5 For InstaRack 011500320003 Set of 4 Units
800 544,5 For InstaRack 011500320004 Set of 4 Units
800 644,5 For InstaRack 011500320005 Set of 4 Units
800 744,5 For InstaRack 011500320006 Set of 4 Units
W H D Model Order no. UP
800 100 800 For InstaRack 011500401005 Set of 4 Units
800 100 1000 For InstaRack 011500401006 Set of 4 Units
Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length
11
Part-No. Image Description ECAT Long Description
011500299001
011500299002
Brush strip L 436 mm – Brush strip for top covers for flexible cable-entry
Supply schedule: 2 brush strips
Supplied as: Set of 20 units
L Model Order no. UP
436 For InstaRack 011500299001 Set of 20 Units
636 For InstaRack 011500299002 Set of 20 Units
Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length
Emerson. Consider it Solved, LIFE, Trellis, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. or one of its affiliated companies. ©2014 Emerson Electric Co. All rights reserved.
While every precaution has been taken to ensure accuracy and completenessherein, Emerson assumes no responsibility, and disclaims all liability, fordamages resulting from use of this information or for any errors or omissions.Specifications subject to change without notice.
About Emerson Network Power Emerson Network Power, a business of Emerson (NYSE:EMR),delivers software, hardware and services that maximize availability,capacity and efficiency for data centers, healthcare and industrialfacilities. A trusted industry leader in smart infrastructuretechnologies, Emerson Network Power provides innovative datacenter infrastructure management solutions that bridge the gapbetween IT and facility management and deliver efficiency anduncompromised availability regardless of capacity demands. Oursolutions are supported globally by local Emerson Network Powerservice technicians. Learn more about Emerson Network Powerproducts and services atwww.EmersonNetworkPower.eu
Ensuring The High AvailabilityOf Mission-Critical Data And Applications.
Locations
Emerson Network PowerGlobal Headquarters1050 Dearborn Drive
P.O. Box 29186Columbus, OH 43229, USA
T +1 614 8880246
Emerson Network PowerEurope Middle East And Africa
Mariakirchener Straße 3894424 Arnstorf
GermanyT +49 8723 27 0
F +49 8723 27 [email protected]
Emerson Network PowerUnited KingdomGeorge Curl Way
SouthamptonSO18 2RY, UK
T +44 (0)23 8061 0311F +44(0)23 8061 0852
EmersonNetworkPower.eu