Windows 200 EMC PowerPath Install Solution Australia and New Zealand Banking Group Limited Windows 2003 EMC PowerPath Installation Revision 1.0 18 Dec. 07 /home/website/convert/temp/convert_html/55d33203bb61eb2e468b479a/document.doc Page 1 Revision number:0.92
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
CopyrightThis document is the property of the Australia and New Zealand Banking Group Limited. Its contents may not be disclosed to any person, association or company, unless they are employed by the Australia and New Zealand Banking Group Limited directly or in a contracting or consulting capacity. This document, nor any part of it, may be retained by any employee, contractor or consultant when such person’s association with Australia and New Zealand Banking Group Limited is terminated.
Copyright 2000 Australia and New Zealand Banking Group Limited.ACN 005 357 522. All rights reserved.
Revision HistoryRevisions between successive approved versions of this document are indicated by the use of change bars in the margin adjacent to the affected paragraph(s).
1.1 PurposeThis documentation will be used to install EMC PowerPath on all servers that require SAN connection through HBA fibre cards. It will document a set by step process for installing this software.
1.2 ScopeThis document is aimed at entire Project Delivery Team . This document details the process, configuration and requirements for the install of EMC PowerPath 4.5.
1.3 ObjectivesThe key objectives of this document are to:
Detail the install of EMC PowerPath 4.5.
1.4 Outstanding Issues
1.5 TerminologyThe following table provides definition of acronyms and terms used in this document:
Term Definition
AD Active Directory
Table 1 - Definitions
1.6 ReferencesThe following tables identifies the resources utilised in the development of this document:
You will be prompted to enter a licence key. This can be found in the following location: C:\Temp\EMCPowerPath\PowerPath\4.5.GA\Licence.txtEnter the licence key and select Add