E.MC CORE PRODUCTS - Tom Parker Ltd · valve body by 6061-T6 Surface by hard anodized high wear resistance and high corrsion resistance polished after finishing the hose roughness

E.MC CORE PRODUCTS

g

Actuators

High quality manufactured by: Automatic machining & assembling streamline; High presicion Japanese & American CNC machines, Advanced Germany tooling, with Japanese seals, Germany grease, 100% automatic tested.

Stable Quality Performance Standard & Customized cylinders

FVBC/VBC (ISO15552) Series cylinder 7 TPU Sealing system, wider wear ring, double cushion system, Japan seal, Germany grease, fully automatic production line

Widen the wear ring, width is

2.5 times of the old model, good

guidance Dust-proof sealing ring and piston seal use

PU material, good abrasion resistance, under

the condition of load test up to 2000 km no

obvious wear and tear.

The piston sealing ring adopts

the double Y type sealing ring,

automatic compensation

function, long service life and

low starting pressure.

The front cover of the oil

bearing is made of bronze

powder metallurgy sintering,

with oil storage and lubrication

function

With gas buffer and rubber

buffer double function, better

cushioning effect, low noise

The built-in magnet to avoid

friction with the cylinder, low

failure rate, expand service life

Four flat design,

convenient installation and

commissioning

ISO series light cylindar（FVBC） ISO15552/VDMA24562 Standard

7 TPU Sealing system, wider wear ring, double cushion system, Japan seal, Germany grease, fully automatic production line

IA(ISO6432), RA,SM Series Mini cylinder Designed air flow adjuster with extra cushion Japan seals, Germany grease Covers and piston are machined by All- Machining-In CNC, Covers and barrel are rolling riveted, much better performance than traditional way.

ISO 6432 Mini Cylinder（IAS）

SF(ISO21287)/SD/SQ/SE Series compact cylinder Strong bronze bearing with better guiding Riveting structure for piston rod/piston, barrel and cover Japan seals, Germany grease, CNC machining 800KM long loaded stroke life

ISO 21287 Compact Cylinder（SF）

High precision series cylinder • SH Pneumatic grippers • EX Pneumatic slides • EIF Electric cylinders • EXS/EN double piston

cylinder • SG Guided Cylinders • EU Compact cylinders

SHC/SHZ Series pneumatic gripper

Integrated design of linear guide rail assures high rigidity and high precision Japan sealing, Germany grease, MAZAK machining Less friction with integral magnet (NdFeB material) TPU bumper gives better cushion performance High precision positioning, more reliable gripping

EXH Series high precision slide cylinder Japan seals, Germany grease, Japan linear guide, MAZAK machining，Strict tolerance between Cover/Plate and rods, longer bearing, precise and reliable

Be sure to install the control valve and the

speed is adjusted to less than 500mm / S .

Air Source

Out

Retracted tube orifice

Protruding tube orifice

Protruding tube orifice

In two sides

IN

In two sides

Retracted tube

orifice

EXH Series high precision slide cylinder

Japan seals, Germany grease, Japan linear guide, MAZAK machining，Strict tolerance between Cover/Plate and rods, longer bearing, precise and reliable

EXS/EN Series double piston cylinder Japan seals, Germany grease, MAZAK machining，Strict tolerance between Cover/Plate and rods, longer bearing, precise and reliable

EU Series Cylinder

EXS series double shaft cylinder

grease

stroke adjustable

multiple installation

holes make cylinder

easily installed.

installation holes on

three sides, easy for

loading with more

directions.

two sets port sizes on

two sides are optional

Japanese seals,

German grease

guarantee the use

life and excellent

performance.

longer guiding bearing, high

non-rotary precision, small

deflection on piston rod

SGM/SGL Series guided cylinder

Strict tolerance between Cover/Plate and rods, stable and durable Japan sealing, Germany grease, MAZAK machining Strong bronze bearing with better guiding Bearing steel rods with high non-return precision, low piston rod deflection

SG series cylinders

made by bearing steel,

guided by linear bearing or

brone bearing with high

anti-tosion and lateral load

resistance.

Machining in one time

on MAZAK machine,

gurantee high precision.

longer guiding bearing,

high non-rotary precision,

small deflection on piston

rod

Japanese seals,

German grease

guarantee the use life

and excellent

performance.

2 sensor switches each on

up and down sides, with

model HX-07

Strict tolerance between Cover/Plate and rods, stable and durable;Japan sealing, Germany grease, Strong bronze bearing with better guiding;Bearing steel rods with high non-return precision, low piston rod deflection

Solenoid Valve

Power ≤ 0.9W up to 80% energy saving Inset energy saving chip, Cut down coil temperature rise, on power long time, lifecycle above:30 million times; Reacting speed:8Hz; Inset protection circut, transitor sytle, can connect PLC directly

Low Power Revolutional Solenoid valve

RV Series revolutional valve

RV Series revolutional valve Globally leading supply chain, Robots + fully automatic CNC machining streamlines + assembling/testing streamlines, 30M/50M cycles.

Globally ONLY Low power technology

NRV Series low power valve Only 1W Directly connecting with PLC 30% faster than normal solenoid valve Low temperature increase(only 10℃), safe Save power for long time use, environment protective Globally ONLY technology, National Patented

A B

S R

Low power consumption coil,1W power only, National Invention Patent

Japnese

seals,Germany

grease,ensure long

lifecycle

Locking nut fixed

coil design

Better stationary

coil

coil by BMC coated

excellent thermal

performance

coil low temperature using special process technology

ensure fillet roughness < <0.4μm

ensure seal life via hole

valve body by 6061-T6 Surface by hard anodized high wear resistance and high corrsion resistance polished after finishing the hose roughness Ra0.1 less reduce seal friction and wear improve lifecycle

Spring + Pilot reset

NRV Series Low Power valve

Globally leading supply chain, Robots + fully automatic CNC machining streamlines + assembling/testing streamlines, 30M/50M cycles.

ZS/SLP Series fluid solenoid valve CNC machining, automatic testing system Professional solenoid pilot production streamline, minimum residential magnetism with special after-treatment 2~8W super low power option gives the only solution for big overheat problem of solenoid valves at much lower temperature, longer life cycle, faster response, safer.

F.R.L & Fitting

Air units for different applications

All kinds of accessories

Air units for different applications

All kinds of accessories

Quality Guarantee

High precision facilities, robots and fully automatic production lines makes every E.MC product precise, reliable, low power and with high performance.

Automatic

Production

According to multiple Top 500 customers strict quality requirement. Global leading supply chain, + fully automatic assembling/testingstreamlines+Japan seals, USA grease.

Fully automatic solenoid valve assembling and testing streamline.

Cost control from mass production advantages based on customer demand

Cost control from automation production line in process innovation