EM 324 Session 9 – Thermal Effects 1) The assembly has the diameters and material indicated. If it fits securely beween its fixed supports when the temperature is T 1 = 70 oF , determine the average normal stress in each material when the temperature reaches T 2 = 110 oF . AB: E = 10.6*10 6 psi, α = 12.8 BC: E = 15*10 6 psi, α = 9.6 CD: E = 28*10 6 psi, α = 9.6
2
Embed
EM 324 Session 9 Thermal Effects - Iowa State University...EM 324 Session 9 – Thermal Effects 1) The assembly has the diameters and material indicated. If it fits securely beween
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EM 324 Session 9 – Thermal Effects
1) The assembly has the diameters and material indicated. If it fits securely beween its
fixed supports when the temperature is T1 = 70oF, determine the average normal stress
in each material when the temperature reaches T2 = 110oF.
AB: E = 10.6*106 psi, α = 12.8
BC: E = 15*106 psi, α = 9.6
CD: E = 28*106 psi, α = 9.6
2) The two cylindrical rod segments are fixed to the rigid walls such that there is a gap of
0.01 in between them when T1 = 60 °F . Each rod has a diameter of 1.25 in. Determine
the average normal stress in each rod if T2 = 400 °F and Calculate the new length of the