ELECTRONIC SPREADSHEATS Chapter 14 Dr. Bahaa Al-Sheikh & Eng. Mohammed AlSumady Intoduction to Engineering BME152
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ELECTRONIC SPREADSHEATS Chapter 14
Dr. Bahaa Al-Sheikh & Eng. Mohammed AlSumady
Intoduction to Engineering
BME152
ELECTRONIC SPREADSHEETS
An electronic spreadsheet is a tool that can be used to solve an engineering problem. Spreadsheets are commonly used to record, organize, and analyze data using formulas.
Spreadsheets are also used to present the results of an analysis in chart form. Although engineers still write computer programs to solve complex engineering problems, simpler problems can be solved with the help of a spreadsheet.
14-3
Microsoft Excel – Basic Ideas
Title barFormula bar Toolbar
button
Column header
Menu bar
Name box
Row header
Active cell
Worksheet tabs
Status bar
© 2011 Cengage Learning Engineering. All Rights Reserved.
Cells and Their Addresses
The columns are marked by A, B, C, D, and so on, while the rows are identified by numbers 1, 2, 3, 4, and so on.
The cells that are selected simultaneously are called a Range, as shown in figure 14.2 .
A range is defined by the cell address of the top-left selected cell in the range followed by a colon, :, and ends with the address of the bottom-right cell in the range.
A Range
14-6
Cell and Address
Cell – represents the box that one sees as the result of the intersection of a row and a column
Cell C4
What you type in formula barWhat you get in active cell
© 2011 Cengage Learning Engineering. All Rights Reserved.
Creating Formulas in Excel
You can use Excel to input engineering formulas and compute the results. In Excel, a formula always begins with an equal sign, =
Example 14.1
The following example will show how the density of standard air changes with temperature. The density of standard air is a function of temperature and may be approximated using the ideal gas law according to where :
Using Excel, we want to create a table that shows the density of air as a function of temperature in the range of 0C (273.15 K) to 50C (323.15 K) in increments of 5C.
Example 14.1
1. In cell A1, type Density of air as a function of temperature.
2. In cells A3 and B3, type Temperature (C),Density (kg/m^3), respectively.
3. In cells A5 and A6, type 0 and 5,respectively.
Example 14.1
4. Pick cells A5 and A6 and use the fill command with the + handle to copy the pattern into cells A7 to A15.
Example 14.1
5. In cell B5, type the formula (101300)/ ((286.9)*(A5 273)), as shown.
Example 14.1
6. Use the Home menu (tab) and the Fill command to copy the formula into cells B6 to B15. You could also use the fill command with the handle to copy the formula into cells B6 to B15.
Example 14.1
7. Pick cells B5: B15 and right-click and Pick Format Cells. Change the number of decimal places to 2, as shown.
The final results for Example 14.1
Using Excel Functions
You can enter a function in any cell by simply typing the name of the function if you already know it.
If you do not know the name of the function, then you can press the Insert Function ( fx) button, and then from the menu select the Function category and the Function name.
Some examples of commonly used Excel functions, along with their proper use and descriptions, are shown in Table 14.3.
Using Excel Functions
Using Excel Functions
14-18
Example 14.3 – Excel Functions (continued)
E1: =SUM(A1:B10)E2: =AVERAGE(A1:B10)E3: =COUNT(A1:B10)E4: =MAX(A1:B10)E5: =MIN(A1:B10)E6: =STDEV(A1:B10)E7: =PI()E8: =DEGREES(PI())E9: =RADIANS(90)E10: =RADIANS(D1)E11: =COS(PI()/2)E12: =COS(RADIANS(D1))E13: =SIN(PI()/2)E14: =SIN(RADIANS(D1))
© 2011 Cengage Learning Engineering. All Rights Reserved.
Example 14.4
Using Excel, compute the average (arithmetic mean) and the standard deviation of the density of water data given in Table 14.5
Example 14.4
Practice example 14.4 at home theoretically and on the PC . If you have questions ask in the next class.
More examples of additional functions
Using Excel Logical Functions
Using Excel Logical Functions
Example 14.5
The pipeline shown in the Figure connected to a control (check) valve that opens when the pressure in the line reaches 20 psi. Various readings were taken at different times and recorded. Using Excel’s logical functions, create a list that shows the corresponding open and closed position of the check valve
Example 14.5
Practice example 14.g at home. Any questions ask in the next class.
14-26
Plotting with Excel
Use Excel to create charts such as Histograms (column or bar charts) Pie charts Line charts XY charts
Most charts we create as engineers are xy-type charts
Chart Wizard walk you through the necessary steps to create a chart
© 2011 Cengage Learning Engineering. All Rights Reserved.
Example 14.6 – Plotting
Given: the results from Example 14.1Find: create a graph showing the value of air density as a function of temperature.
14-27
© 2011 Cengage Learning Engineering. All Rights Reserved.
14-28
Example 14.6 – Plotting (continued)
Solution:
Select the data range
Select Chart Wizard icon
Click Scatter plot
Click Insert tab
Select XY plot with line
© 2011 Cengage Learning Engineering. All Rights Reserved.
14-29
Example 14.6 – Plotting (continued)
Solution (continued): the chart is shown to the right of the data
© 2011 Cengage Learning Engineering. All Rights Reserved.
14-30
Example 14.6 – Plotting (continued)
Chart Title and Axis Title icons
Layout tab
Solution (continued): add axis and chart titles by clicking the Layout tab under Chart Tool menu and make necessary modifications
© 2011 Cengage Learning Engineering. All Rights Reserved.
Matrix Computation with Excel
During your engineering education, you will learn about different types of physical variables.
These types of physical variables, which are identifiable by a single value, are called scalars.
The physical variables that possess both magnitude and direction are called vectors.
Matrix Computation with Excel
There are also other quantities that in order to describe them accurately we need to specify more than two pieces of information.
For example, if you were to describe the location (with respect to the entrance of a garage) of a car parked in a multi-story garage, you need to specify the floor (the z coordinate) and then the location of the car on that floor, specifying the section and the row (x and y coordinates).
Matrix Computation with Excel
A matrix is an array of numbers, variables, or mathematical terms.
A matrix may consists of m rows and n columns. For example,
Related Documents
