Top Banner
Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.
51

Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Dec 24, 2015

Download

Documents

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Electromagnetic Induction

• emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Page 2: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Faraday’s work

• Faraday suggested that an e.m.f. is induced in a conductor when

1. there is a change in the number of lines ‘linking’ it,

2. it ‘cuts’ across field lines.

Page 3: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

• As shown in the figure, if the coil moves towards the magnet from X to Y, the number of magnetic field lines linking it increases from three to five; alternatively we can say it cuts two lines in moving from X to Y.

• Hence, an e.m.f. is induced in the coil.

Page 4: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

• The figure shows two stationary coils A and B. • When a current flowing in coil A increases or decreas

es, the magnetic flux linking coil B increases and decreases respectively. Hence, an e.m.f. is induced in coil B.

Page 5: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Magnetic flux

• B: magnetic flux density (i.e. the number of magnetic field lines per unit cross-section area)

• A: cross-section area, • magnetic flux linking the area is the product BA repre

sents the number of field lines linking a surface of cross-sectional area A.

= BA • If B = 1 T and A = 1 m2, is defined to be 1 (Tm2) or

weber (Wb).

B

A x x x x x x x x x x x x x x x x x x x x x x x x x x x x

Page 6: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Magnetic flux

• If the surface is not perpendicular to the field with the normal to the surface making an angle to the field, the magnetic flux linking the area is = BA cos .

• If is the flux through the cross-section area A of a coil of N turns, the total flux through it, called the flux-linkage, is N since the same flux links each of the N turns.

B

Normal

= BA cos

B

B-field ⊥ plane of coil

= BA

Page 7: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 1

• A circular coil of 20 turns with diameter 10 cm is placed in a region of uniform magnetic field of 1.5 T. Find the flux-linkage if the plane of the coil

• (a) is perpendicular to the field,• Solution:

Page 8: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 1

• A circular coil of 20 turns with diameter 10 cm is placed in a region of uniform magnetic field of 1.5 T. Find the flux-linkage if the plane of the coil

• (b) is along the field, and• Solution:

Page 9: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 1

• A circular coil of 20 turns with diameter 10 cm is placed in a region of uniform magnetic field of 1.5 T. Find the flux-linkage if the plane of the coil

• (c) makes an angle of 30o to the field.• Solution:

Page 10: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Faraday’s law

• Mathematically, or .

• It is defined that 1 Wb is magnetic flux that induces in a one-turn coil an e.m.f. of 1 volt when the flux is reduced to zero in 1 s.

• By putting = 1 V, dt = 1 s and d(N) = 1 Wb, we have 1 = constant x 1/1.

• Hence,

The induced e.m.f. is directly proportional to the rate of change of flux-linkage or rate of flux cutting.

Ndt

d Ndt

dconstant

Ndt

d

Page 11: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 2

• (a) Suppose a 5000-turn coil of cross-section area 5 cm2 is at right angles to a flux density of 0.2 T, which is then reduced steadily to zero in 10 s. Find the e.m.f. induced in the coil.

• (b) Find the e.m.f. induced if the normal to the plane of coil makes an angle of 60o with the field.

• Solution

Page 12: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Lenz’s law

Page 13: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Lenz's law

In both cases, magnet moves against a force.

Work is done during the motion & it is transferred as electrical energy.

Induced I always flows to oppose the movement which started it.

Page 14: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

• Lenz’s law is incorporated in the mathematic expression of Faraday’s law by including a negative sign to show that current due to the induced e.m.f. produces an opposing flux change. So we have

Ndt

d

Page 15: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Fleming's right-hand ruleFor a wire cutting through a B-field...

motion or force Fmagnetic f

ield B

induced current I

Page 16: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 3

• State the direction of induced current flowing through coil B observed by the observer when the current through coil A increases steadily.

• Solution:

observer

Page 17: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Calculation of e.m.f.

• Consider a conducting rod of length l moving sideways with constant velocity v through and at right angles to a uniform magnetic field of flux density B.

• Area swept out per second by the rod per second = lv• Flux cut per second = Blv• e.m.f induced = rate of flux-cutting = flux cut per second

= Blv

lBv

Page 18: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Alternative derivation

• Magnetic force = Bqv.• An electric field is built up due to the acc

umulation of charges.• Electric force = qE • Finally, equilibrium is reached when mag

netic force acting on electrons is balanced by electric force.

• Hence, qE = Bqv ⇒ E = Bv

• An e.m.f. is generated across the conductor such that

= El = Blv.

Page 19: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Example 4

• A metal aircraft of wing span l = 32 m is flying with speed v = 190 ms-1 towards the earth’s magnetic north pole in a region where the earth’s magnetic field BR = 4.3 x 10-5 T and the angle of dip = 65o.

• Calculate the e.m.f. induced across its wing tips.

• Solution:

Page 20: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Simple a.c. Generator

• According to the Faraday’s law of electromagnetic induction,

tBAdt

dN

dt

Nd cos tNBA sinhttp://www.walter-fendt.de/ph11e/generator_e.htm

Page 21: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Simple d.c. Generator

tNBA sin

Page 22: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Back e.m.f. Sparks appear while opening a switch

• There is current flowing in the coil of the electromagnet in use.

• When the circuit is broken by opening the switch, the current starts to drop and the flux linkage through the coil of the electromagnet decreases suddenly.

• By Faraday’s law, a large induced e.m.f. would develop across the coil of the electromagnet so as to oppose the change.

• Sparks occur due to the discharge across the small gap of the switch.

Page 23: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

DC motors

• A d.c. motor consists of a coil on an axle, carrying a d.c. current in a magnetic field.

• The coil experiences a couple as in a moving-coil galvanometer which makes it rotate.

• When its plane is perpendicular to the field, a split-ring commutator reverses the current in the coil and ensures that the couple continues to act in the same direction thereby maintaining the rotation.

Page 24: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Back emf in Motors

• When an electric motor is running, its armature windings are cutting through the magnetic field of the stator. Thus the motor is acting also as a generator.

• According to Lenz's Law, the induced voltage in the armature will oppose the applied voltage in the stator.

• This induced voltage is called back emf.

Page 25: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Back emf and Power

• So the mechanical power developed in motor

Armature coils, R

Driving source, V

Back emf, Eb

IRV b

Multiplying by I, then

RIIVI b2

RIVIIb2

Ib

Page 26: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Variation of current as a motor is started

• As the coil rotates, the angular speed as well as the back emf increases and the current decreases until the motor reaches a steady state.

I

t0

Larger load

Zero load

R

VI max

Page 27: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

The need for a starting resistance in a motor

• When the motor is first switched on, =0.• The initial current, Io=V/R, very large if R is small.• When the motor is running, the back emf increases,

so the current decrease to its working value.• To prevent the armature burning out under a high

starting current, it is placed in series with a rheostat, whose resistance is decreases as the motor gathers speed.

Page 28: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Variation of current with the steady angular speed of the coil in

a motor

• The maximum speed of the motor occurs when the current in the motor is zero.

I

0

R

NBAVI

R

VI max

NBA

Vmax

Page 29: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Eddy Current• An eddy current is a swirling

current set up in a conductor in response to a changing magnetic field.

• When the magnetic flux linkage through a conductor changes, an e.m.f. is induced in it.

• If the conductor is a lump of metal. These are known as Eddy Currents.

• Eddy currents may be quite large because of the low resistance of the paths they follow.

Page 30: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Consider a metallic sheet moving away from a magnetic field.

• By Lenz’s law, eddy currents must flow in a direction to oppose the motion of the sheet.

• Hence, eddy currents act as an effective brake to its motion.

• The mechanical work done is converted into internal energy of the sheet.

Page 31: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Applications1 Smooth Braking Device

• The eddy currents induced in the copper plate produce a strong braking effect on the plate which stops oscillating quickly.

• If the copper plate is replaced by one with slits, the induced eddy currents, which can only flow within the narrow teeth between the slits, are greatly reduced. This is because the resistance of the path which the eddy currents follow is increased.

Page 32: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Braking effect in moving-coil galvanometer

• As the core swings in a magnetic field, eddy currents are induced in it. Since the eddy currents flow in a direction to oppose the motion, unwanted oscillations are reduced.

eddy currentssoft-iron

core

pointer

Page 33: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

• Ideal design of the core is to produce critical damping in which oscillation is just avoided.

Page 34: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Metal Detector

• A pulsing current is applied to the coil, which then induces a magnetic field shown in blue. When the magnetic field of the coil moves across metal, such as the coin in this illustration, the field induces electric currents (called eddy currents) in the coin.

• The eddy currents induce their own magnetic field, shown in red, which generates an opposite current in the coil, which induces a signal indicating the presence of metal.

• A metal detector can also be used to detect mines buried underground.

Page 35: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Induction cooker

• The induction cooker uses coils of wire with high frequency a.c. to produce large eddy currents in the metal cooking pot placing above. The heating effect of the eddy current cooks the food.

• Moreover, since eddy current is not induced in its plastic case which is made up of non-metallic material, the cooker is not hot to touch.

Page 36: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Transformer

• A transformer is a device for stepping up or down an alternating voltage.

• For an ideal transformer, – (i.e. zero resistance and no flux leakage)

p

s

p

s

N

N

V

V

dt

dNV B

pp

dt

dNV B

ss

Page 37: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Transformer Energy Losses

• Heat Losses1. Copper losses - Heating effect occurs in the coppe

r coils by the current in them.2. Eddy current losses - Induced eddy currents flow i

n the soft iron core due to the flux changes in the metal.

• Magnetic Losses1. Hysteresis losses - The core dissipates energy on

repeated magnetization.2. Flux leakage - Some magnetic flux does not pass t

hrough the iron core.

Page 38: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Designing a transformer to reduce power losses

• Thick copper wire of low resistance is used to reduce the heating effect (I2R).

• The iron core is laminated, the high resistance between the laminations reduces the eddy currents as well as the heat produced.

• The core is made of very soft iron, which is very easily magnetized and demagnetized.

• The core is designed for maximum linkage, common method is to wind the secondary coil on the top of the primary coil and the iron core must always form a closed loop of iron.

                                                                   

Page 39: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Transmission of Electrical Energy

• Wires must have a low resistance to reduce power loss.• Electrical power must be transmitted at low currents to reduce

power loss.• To carry the same power at low current we must use a high

voltage.• To step up to a high voltage at the beginning of a transmission

line and to step down to a low voltage again at the end we need transformers.

Page 40: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Direct Current Transmission

• Advantages– a.c. produces alternating magnetic field which induces

current in nearby wires and so reduce transmitted power; this is absent in d.c.

– It is possible to transmit d.c. at a higher average voltage than a.c. since for d.c., the rms value equals the peak; and breakdown of insulation or of air is determined by the peak voltage.

• Disadvantage– Changing voltage with d.c. is more difficult and expensi

ve.

Page 41: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Self Induction

• When a changing current passes through a coil or solenoid, a changing magnetic flux is produced inside the coil, and this in turn induces an emf.

• This emf opposes the change in flux and is called self-induced emf.

• The self-induced emf will be against the current if it is increasing.

• This phenomenon is called self-induction.

Page 42: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Definitions of Self-inductance (1)

• Definition used to find L

LI

The magnetic flux linkage in a coil the current flowing through the coil.

Where L is the constant of proportionality for the coil.L is numerically equal to the flux linkage of a circuit when unit current flows through it.

IL

Unit : Wb A-1 or H (henr

y)

Page 43: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Definitions of Self-inductance (2)

• Definition that describes the behaviour of an inductor in a circuit

dt

d dt

dIL

dtdI

L

L is numerically equal to the emf induced in the circuit when the current changes at the rate of 1 A in each second.

Page 44: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Inductors

• Coils designed to produce large self-induced emfs are called inductors (or chokes).

• In d.c. circuit, they are used to slow the growth of current.

• Circuit symbolor

Page 45: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Inductance of a Solenoid

• Since the magnetic flux density due to a solenoid is

NI

B o

• By the Faraday’s law of electromagnetic induction,

dt

dN

)()(NIA

dt

dNBA

dt

dN o

dt

dIANo

2

AN

L o2

Page 46: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Energy Stored in an Inductor

• The work done against the back emf in bringing the current from zero to a steady value Io is

oIIdtW

0

dtdt

dILI

oI

0

oILIdI

0

2

2

1oLI

Page 47: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Current growth in an RL circuit

• At t = 0, the current is zero.• So dt

dIL• As the current grows, the

p.d. across the resistor increases. So the self-induced emf ( - IR) falls; hence the rate of growth of current falls.

• As t 0dt

dI

)1( LRt

eR

I

IRdt

dILV

Page 48: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Decay of Current through an Inductor

• Time constant for RL circuit

LRt

oeII

L

R

• The time constant is a measure of how quickly the current grows or decays.

• The time constant is the time for current to decrease to 1/e of its original value.

Page 49: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

emf across contacts at break

• To prevent sparking at the contacts of a switch in an inductive circuit, a capacitor is often connected across the switch.

+ -

The energy originally storedin the magnetic field of the coilis now stored in the electric field of the capacitor.

22

2

1

2

1CVLI

Page 50: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Switch Design

• An example of using a protection diode with a relay coil.

+ -

• A blocking diode parallel to the inductive coil is used to reduce the high back emf present across the contacts when the switch opens.

Page 51: Electromagnetic Induction emf is induced in a conductor placed in a magnetic field whenever there is a change in magnetic field.

Non-Inductive Coil

• To minimize the self-inductance, the coils of resistance boxes are wound so as to set up extremely small magnetic fields.

• The wire is double-back on itself. Each part of the coil is then travelled by the same current in opposite directions and so the resultant magnetic field is negligible.