EWAC ST 212AC/DC+ Tensiles Strength: 580 MPa (84,000 psi) Size (mm) 3.15 4.00 5.00 Recommended Amperages: Amperages 55-100 85-140 135-185 Typical Applications: Outstanding Features: Recommendation: Buckets, boom, stick, C frame & undercarriage components of earthmoving equipment. Low heat input. Compatibility with wide range of steels. High ductility. Excellent crack resistivity. For welding of similar and dissimilar combinations of low-medium carbon steels, low alloy steels, manganese steels, etc. as encountered in construction and mining industry. • • • • Procedure: Clean weld area. Remove all fatigued or cracked metal. Bevel heavy sections 60°- 90° vee. Use short arc to deposit stringer beads. Chip slag between passes. Peen deposits in crack-sensitive applications. Prevent localised heat build-up by staggered welding. When welding Manganese steels, do not allow job temperature to exceed 150°C. Bucket Electrode for high strength joining of low, medium carbon and low alloy steel 24
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EWAC ST 212AC/DC+
Tensiles Strength: 580 MPa (84,000 psi)
Size (mm)
3.15
4.00
5.00
Recommended Amperages:
Amperages
55-100
85-140
135-185
Typical Applications:
Outstanding Features:
Recommendation:
Buckets, boom, stick, C frame & u n d e r c a r r i a g e c o m p o n e n t s o f earthmoving equipment.
Low heat input.Compatibility with wide range of steels.High ductility.Excellent crack resistivity.
For welding of similar and dissimilar combinations of low-medium carbon steels, low alloy steels, manganese steels, etc. as encountered in construction and mining industry.
••••
Procedure: Clean weld area. Remove all fatigued or cracked metal. Bevel heavy sections 60°-90° vee. Use short arc to deposit stringer beads. Chip slag between passes. Peen deposits in crack-sensitive applications. Prevent localised heat build-up by staggered welding. When welding Manganese steels, do not allow job temperature to exceed 150°C.
Bucket
Electrode for high strength joining of low, medium carbon and low alloy steel
24
Related Documents
