Kockum Sonics AB, Industrigatan 39, P.O. Box 1035, SE-212 10 Malmö, Sweden, Tel: +46 (0) 40 671 88 00 Fax: +46 (0) 40 21 65 13, e-mail: [email protected], www.kockumsonics.com ELECTRO–TYFON ® MTX 150/130 For vessels of 200 m or more in length TYFON ® KSM521E/1421 Contactor Unit TK 80 See separate leaflet KSM742 Sound frequency (basic): 130 Hz Sound Pressure Level acc to IMO (1/3 oct band): >143 dB/1m Sound Level A-weighted: 146 dBA/1m Rated current: 12.5A /440V at 20 o C 8A / 690V at 20 o C Electrical protection class: IP 56 Colors: Body Galvanized nat. Motor Grey RAL 7030 Horn White RAL 9003 Weight (approx.): 70 kg General Information ELECTRO–TYFON ® MTX 150/130 is an electrically driven piston ship’s whistle. It is built up of comparatively few moving parts as the “swinging piston”, no lubricated cylinder and an oil free gearbox. Important features: • unsymmetrical sound distribution • operates in all ambient temperatures without any additional measures • unaffected by voltage and frequency fluctuations • oil free, maintenance free and non–corrosive • easy to install • complies fully with the International Regulations IMO 1972 Technical Data Type Power Supply Ref No MTX 150/130 3 ph 380-440 V 60 Hz 24800287 MTX 150/130 3 ph 380-440 V 50 Hz 24800534 MTX 150/130 3 ph 660-690 V 60 Hz 24800535 MTX 150/130 3 ph 660-690 V 50 Hz 24800536 ELECTRO-TYFON Operates in all temperatures without any additional measures ELECTRO–TYFON ® MTX 150/130 will give a high performance in both arctic and tropical climates. A patented system with a high efficiency rectangular horn and a specially designed motor will match the motor speed to the acoustic resonance of the horn at any ambient temperature without any additional measures. This system also prevents the whistle from being affected by voltage and frequency fluctuations in onboard mains. Unsymmetrical Sound Distribution The IMO Regulations stipulate a very high Sound Pressure Level for efficient signaling, yet the sound level of the vessel's own signal at the listening posts shall not exceed 110 dBA. A common way to solve this “paradox” is to place the whistle very high above deck. But what if the highest point is not high enough? For example: to reduce the noise from the signal by 6 dB, the distance between the listening post and the whistle must be doubled! ELECTRO–TYFON ® MTX 150/130 with Unsymmetrical Sound Distribution is the solution. The horn with its unique vertically extended front, and a specially created sound spectrum will reduce the noise on deck with 6–8 dB compared to a conventional whistle with circular outlet.
4
Embed
ELECTRO–TYFON MTX 150/130 - Dansk · Contactor Unit TK 80 See separate leaflet KSM742 Sound frequency (basic): 130 Hz ... ELECTRO–TYFON® MTX 150/130 is an electrically driven
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
ELECTRO–TYFON® MTX 150/130For vessels of 200 m or more in length
TYFO
N®
KSM521E/1421
Contactor Unit TK 80See separate leaflet KSM742
Sound frequency (basic): 130 HzSound Pressure Level acc to IMO (1/3 oct band): >143 dB/1mSound Level A-weighted: 146 dBA/1mRated current: 12.5A /440V at 20oC 8A / 690V at 20oCElectrical protection class: IP 56Colors: Body Galvanized nat. Motor Grey RAL 7030 Horn White RAL 9003Weight (approx.): 70 kg
General InformationELECTRO–TYFON® MTX 150/130 is an electrically driven piston ship’s whistle. It is built up of comparatively fewmoving parts as the “swinging piston”, no lubricated cylinder and an oil free gearbox.
Important features:• unsymmetrical sound distribution• operates in all ambient temperatures without any additional measures• unaffected by voltage and frequency fluctuations• oil free, maintenance free and non–corrosive• easy to install• complies fully with the International Regulations IMO 1972
Technical Data
Type Power Supply Ref NoMTX 150/130 3 ph 380-440 V 60 Hz 24800287MTX 150/130 3 ph 380-440 V 50 Hz 24800534MTX 150/130 3 ph 660-690 V 60 Hz 24800535MTX 150/130 3 ph 660-690 V 50 Hz 24800536
ELECTRO-TYFON
Operates in all temperatures without any additional measuresELECTRO–TYFON® MTX 150/130 will give a highperformance in both arctic and tropical climates.A patented system with a high efficiency rectangular horn and a specially designed motor will match the motor speed to the acoustic resonance of the horn at any ambient temperature without any additional measures. This system also prevents the whistle from being affected by voltage and frequency fluctuations in onboard mains.
Unsymmetrical Sound DistributionThe IMO Regulations stipulate a very high SoundPressure Level for efficient signaling, yet the sound level of the vessel's own signal at the listening posts shall notexceed 110 dBA.A common way to solve this “paradox” is to place the whistle very high above deck. But what if the highest point is not high enough? For example: to reduce the noise from the signal by 6 dB, the distance between thelistening post and the whistle must be doubled!
ELECTRO–TYFON® MTX 150/130 with Unsymmetrical Sound Distribution is the solution. The horn with its unique vertically extended front, and a specially created sound spectrum will reduce the noise on deck with 6–8 dBcompared to a conventional whistle with circular outlet.
Dimensions, Installation and Maintenance
Motor ControlKockum Sonic’s Contactor Unit TK 80 is especially developed to control the ELECTRO-TYFON® MTX 150/130
Functions:• Motor start• Motor overload protection• Winding heating of motor for anti-condensation purpose.
For full description see data sheet KSM742.
InstallationELECTRO–TYFON® MTX 150/130 shall be fixed with four M12 screws that must be firmly tightened and locked.
Mount the whistle on a platform supplied with a safety rail.As the whistle is subject to vibration on starting and stopping, flexible electric cables should be used nearest the motor.The gland on the electric Motor Terminal Box is M 32 for cable Ø 17 - 28 mm.Optional: M 25 for cable Ø 9-20 mm.
Recommended power cable section:For cable length up to 100 m Ø 4 mm2
For cable length over 100 m Ø 6 mm2
Recommended fuses slow 20A
MaintenanceAll components are chosen to withstand corrosion and to give a minimum of maintenance.The crankcase and foundation is hot galvanized. The motor is marine coated - Marine C4 class.The horn is made of glass fiber armed polyester (white). The cylinder is non lubricated and the gearbox is entirely oil free.
ELECTRO-TYFON® MTX 150/130 is designed to give long reliable service without routine maintenance, but a periodic inspection always gives early warning of any faults that may develop.
Trouble shooting and refurbishing
Important:• The motor (driver) is always delivered with the driving gear wheel mounted on the shaft.• Do not reuse the old gear wheel, it is made of bakelite and pressed with tight fit and may be damaged when remo-
ved/remounted.• Lubricate the teeth of the gearwheels with the grease enclosed in the set.• Change always piston and piston rod together. When loosening and retightening the piston screw counter hold with a
spanner on the flat surfaces of the piston rod just above the piston to avoid twisting the rod.• Lubricate the piston rod bearing and fill half of the volume inside the bearing cover with high-speed roller bearing
grease enclosed in the set.• The gear shaft as spare part is delivered complete with front bearing and gear wheel.
Do not remove rear bearing if not necessary, it is fixed in the crank case.• Do not reuse the steel gear wheel, it is warm pressed with very tight fit and may be damaged when removed/remoun-
ted.• On inspection or change of parts, always replace O-rings, circlips, the piston rod sealing ring with new ones.• Lock all screws with Loctite 242 or similar locking liquid.
In case of insecurity do not hesitate to contact Kockum Sonics for guidance.Kockum Sonics can also carry out repair or deliver refurbished unit to a reduced price.
Motor is not running Check the wirings for possible shortcut or insulation error.
Change the motor together with the motor gearwheel.
Motor is running slow,Weak sound
Check the wirings for possible shortcut or insulation error.
If motor OK check and change, if required, the shaft with bearings.
Motor is running, only mechanical noise
Check the piston, piston rings and piston rod.
Change damaged components. It is not necessary todisassembly the motor.
Powerful vibration, entire unit
Check the vibration dampers. Change if damaged
Trouble shooting, refurbishingPrior to any work on the unit disconnect power.Eliminate possible power failure; check the voltage of every phase on motor wire terminals.
Subject to alteration without notice.
MTX 150/130 - Parts list
Item Description Data/remarks Ref. No.1 Driver
1.1 Motor 380-440V/50-60Hz 21800420660-690V/50-60Hz 21801030