ELECT Improveme ULTRA-SHINE Electro productivity with reduction in co The casted pieces are dire In few seconds, the surface of the and the pieces will be polished. 8 of your pre-polishing work will b without any actual metal loss. Key Features: Common plant for Gold a Gives 99.9% Metal recov Reduces filling work up t Reduces polishing work Enhances shine on the m Gives very smooth surfac Casted piece is polished i Does not harm stones. Even the inner most surfa Technical’s: Electro-polishing of meta submerged in a specially-designe ULTRA-SHINE SOLUTIONS. When used, the process re non metallic’s from the surface. T surface. TRO-POLISHING PLANT ent in quality with reduction in cost. Polishing Plant is a special Machine which incre ost and improvement in quality. ectly dipped in this Machine. e pieces will become smooth 85% of your filling and 60% be done in few seconds, and Silver. very from the bath. to 90% up to 65% metal and diamond area. ce finishing. in just 4 Minutes. ace is polished. al involves passage of electric current through a ed ULTRA-SHINE ELECTROPOLISHING PL emoves Gold, Silver, copper, Nickel, Palladium Thus, it also enhances the corrosion resistance o Technical & Project Consultants for Jewellery Manufacturing & 8A,Sethi Industrial Estate,Suren Road,Near Gurunana Andheri(E),Mumbai-400093. Ph: - +91-22-65272781 tale fax: Email: - [email protected] web: - w eases your piece while it is LANT with m, zinc, as well as of the metal & Exports ak Petrol Pump, : - +91-22-65272782 www.jewelkon.com