The specialist with the highest permeability isovac ® is the electrical steel made by voestalpine and stands for highest energy efficiency. With its excellent attribute profile, isovac ® provides a higher level of quality that will help you remain a step ahead of the competition. This non-grain-oriented, full-finished isovac ® grade is produced on one of the world‘s most modern continuous annealing lines and features a specially adjusted microstructure and texture achieved by a special annealing process that increases both flux density and magnetizability across the entire range of the magnetic field. The higher permeability of isovac HP 350-65 A makes it possible to reduce machine size while maintaining the same amount of torque. Convincing advantages p Production in one of the world‘s most modern continuous annealing lines with widths of up to 1650 mm p Higher rotational speeds/torques with increased output based on higher magnetizability (up to 0.06 T at J25/50/100) p Machine downsizing for reduced material consumption, lower weight and minimized space requirements Electrical steel FULL-FINISHED ELECTRICAL STEEL SEMI-FINISHED ELECTRICAL STEEL voestalpine Steel Division www.voestalpine.com/isovac isovac high-perm 350-65 A Data sheet • February 2015
6
Embed
Electrical steel - Voestalpine · isovac® is the electrical steel made by voestalpine and stands for highest energy efficiency. With its excellent attribute profile, ... Mechanical
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The specialist with the highest permeability
isovac® is the electrical steel made by voestalpine and stands for highest energy efficiency. With its
excellent attribute profile, isovac® provides a higher level of quality that will help you remain a step
ahead of the competition.
This non-grain-oriented, full-finished isovac® grade is produced on one of the world‘s most modern
continuous annealing lines and features a specially adjusted microstructure and texture achieved by a
special annealing process that increases both flux density and magnetizability across the entire range
of the magnetic field. The higher permeability of isovac HP 350-65 A makes it possible to reduce
machine size while maintaining the same amount of torque.
Convincing advantages p Production in one of the world‘s most modern continuous
annealing lines with widths of up to 1650 mm
p Higher rotational speeds/torques with increased output based on higher magnetizability (up to 0.06 T at J25/50/100)
p Machine downsizing for reduced material consumption, lower weight and minimized space requirements
Electrical steel
Fu
ll-F
inis
he
d e
le
ctr
ica
l s
te
el
se
mi-
Fin
ish
ed
ele
ctr
ica
l s
te
el
voestalpine Steel Division
www.voestalpine.com/isovac
isovac high-perm 350-65 AData sheet • February 2015
2is
ov
ac
HP
35
0-6
5 A
da
ta s
he
et
• 0
2/2
01
5voestalpine supplies isovac HP 350-65 A, an electrical steel of the highest quality. We offer you a customer-focused overall package of products, service and logistics in addition to all the advantages of our integrated metallurgical facility and Steel Service Centers.
Mechanical properties
Tensile test according to DIN EN ISO 6892-1 and hardness according to DIN EN ISO 6507-1 (Typical values); Test direction: Transverse
Grade named according to isovac®
Yield strength ReH
[MPa]
0.2 %-Yield strength Rp0.2
[MPa]
Tensile strength Rm
[MPa]
ElongationA80 [%]
HardnessHV5[-]
isovac HP 350-65 A 365 355 500 30 185
Magnetic properties
in as-delivered condition (Typical values) Test direction: Mean value from longitudinal and transverse measurements at 50 Hz (60 Hz), single-sheet test
Grade named according to isovac®
Specific total loss Magnetic polarization Relative Permeability
1.0 T P10
1.5 TP15
2500 A/mJ25
5000 A/m J50
10000 A/m J100
1.5 T μr
50 Hz [W/kg]
60 Hz [W/lb]
50 Hz [W/kg]
60 Hz [W/lb] [T] [T] [T] [-]
isovac HP 350-65 A 1.35 0.80 3.10 1.80 1.62 1.71 1.82 2400
Physical properties
(Typical values)
Grade named according to isovac®
Density
[g/cm3]
Specific electrical resistances
[μΩcm]
Thermal conductivity
[W/mK]
isovac HP 350-65 A 7.68 52.0 25
3is
ov
ac
HP
35
0-6
5 A
da
ta s
he
et
• 0
2/2
01
5
0.0
0.1
1.0
10.0
100.0
1000.0
0 500 1000 1500
P S [W
/kg]
J [mT]
50 Hz
60 Hz
200 Hz
400 Hz
500 Hz
Characteristics Ps/J loss curve and characteristics J/H magnetization curve
Test direction: Mean value from longitudinal and transverse measurements at indicated frequencies, single-sheet test
Characteristics μr/J permeability curve
Test direction: Mean value from longitudinal and transverse measurements at 50 Hz, single-sheet test
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
0 500 1000 1500 2000
µ r
J [mT]
50 Hz
0
200
400
600
800
1000
1200
1400
1600
1800
10 100 1000 10000
J [mT]
H [A/m]
50 Hz
4is
ov
ac
HP
35
0-6
5 A
da
ta s
he
et
• 0
2/2
01
5Frequency dependence of magnetic properties
Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test
isovac HP 350-65 AWide strip/Slit strip 19 – 1600 -
Cut-to-length sheets 300 – 1600 300 – 6000
Deliverable coating systems
Grade named according to isovac® Uncoated C-3 Backlack C-5 C-6 Blue
isovac HP 350-65 A X X On request X X -
The information and product properties contained in this printed material are non-binding and serve the exclusive purpose of technical orientation. They do not replace individual con-sultation provided by our sales and customer service teams. The information and product properties contained in this brochure are guaranteed only when specifically and contractually stipulated. All rights reserved. Not responsible for printing errors or technical changes. Duplication in part or in whole is subject to explicit written permission by voestalpine Stahl GmbH.
Please find further information and downloadable files atwww.voestalpine.com/isovac